Related
A few weeks ago you posted a guide on one of my threads about how to reflash my Desire using a goldcard which worked great for me and I was able to reflash and reroot my Desire - I only followed your guide up to and including Step 2. as once I had a working phone again I wan't too bothered about the additional steps to take it back to stock ROM.
Since flashing a custom ROM (LeeDroid 2.3d) and a LOT of apps on a 16gb MicroSD card, the phone worked fine. However, over the last few days it started randomly rebooting and has gotten progressively worse.
I decided to reflash back to stock again using your guide (post #14 http://forum.xda-developers.com/showthread.php?t=892064&page=2).
The process completes but there is an error on one of the steps (step 6). After the reflash the screen shows the following :-
[1] BOOTLOADER - OK
[2] RADIO_V2 - OK
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail!
Do you want to reboot device?
<VOL UP> Yes
<VOL DOWN> No
Presumably, the PU in 'Fail-PU' means Partition update. The only thing is, I am flashing the PB99IMG.zip file from a goldcard as per the Droidzone guide - there is no partition on the goldcard.
Do you (or anyone else reading this) have any idea why it might be failing at step 6? The phone does actually boot up after the reflash but HTC Sense just goes into a repeated 'Force Close' loop. Is there a different ROM image I can try when using your process with the goldcard?
Since the reflash process does complete and the phone boots up (albiet with the HTC Sense 'force close' issue) I'm guessing it shouldn't be too difficult an issue to solve...I just need to know how to solve it.
I have downloaded the PB99IMG.zip file again just in case the original was corrupt, but I got the same result.
Any help or guidance you or anyone else can give is much appreciated.
Thanks,
Rich
Leave it a bit and do it again, should be fine. I had the same issue with the radio part but 30 mins later I was back to stock
Already tried
EddyOS said:
Leave it a bit and do it again, should be fine. I had the same issue with the radio part but 30 mins later I was back to stock
Click to expand...
Click to collapse
Thanks for the tip Eddy, but I've already tried a few times with no luck.
Any other ideas still welcome.
anyone?
*** BUMP ***
Still trying to fix Desire
*** bump again ***
babblerx said:
*** bump again ***
Click to expand...
Click to collapse
your best bet would be to use an exe file like this and see if that helps. Ensure that you are on a computer on which HTC sync / other android drivers have never been used before:
http://www.htc.com/au/SupportViewNews.aspx?dl_id=1048&news_id=787
is my desire dead?
I've tried to reflash my Desire several times using Droidzone's guide over the last few days. Each time I was getting the Fail-PU message at when it was trying to install the System (step 6).
However, today things took a turn for the worse...I tried reflashing using the using the .exe file via fastboot. It appeared to be working until the end when it reported a fail and dropped into the HTC rom boot screen (black with 'htc' in big letters in the middle of the screen) with a small white triangle and exclamation mark in each corner of the screen.
No matter what I try I can get to the recovery screen.
Can anyone please help????
Please don't bump threads, they'll get answered as and when someone has time
Apologies
Sorry Eddy.
I know I 'bumped' twice. Things have got worse now though....desparate for help!
babblerx said:
I've tried to reflash my Desire several times using Droidzone's guide over the last few days. Each time I was getting the Fail-PU message at when it was trying to install the System (step 6).
However, today things took a turn for the worse...I tried reflashing using the using the .exe file via fastboot. It appeared to be working until the end when it reported a fail and dropped into the HTC rom boot screen (black with 'htc' in big letters in the middle of the screen) with a small white triangle and exclamation mark in each corner of the screen.
No matter what I try I can get to the recovery screen.
Can anyone please help????
Click to expand...
Click to collapse
Try this:
press vol up and power and you get a small menu where you can delete recovery.img (assuming you're rooted).
Then install a RUU
Find your RUU here: www.shipped-roms.com
babblerx said:
I've tried to reflash my Desire several times using Droidzone's guide over the last few days. Each time I was getting the Fail-PU message at when it was trying to install the System (step 6).
Click to expand...
Click to collapse
Are you using the original USB cable shipped with your desire? I know from experience that the non-originals cause problems.
cs
That didn't work
celestialspring said:
Try this:
press vol up and power and you get a small menu where you can delete recovery.img (assuming you're rooted).
Then install a RUU
Find your RUU here: www.shipped-roms.com
Click to expand...
Click to collapse
Thanks Celestialspring, but that didn't work because after following Droidzone's original guide (to step 2) the phone isn't rooted. The only screen I can get is the black screen with with the HTC lettered logo in the middle and a triangled exclamation in each corner. The phone will recognise RUU exe's via USB from this screen, but non of the RUUs work.
Hoping you might have some other ideas.
Will I be able to do anything via ADB (not that I've used it, but willing to try just about anything now)? I've also got a goldcard, not that I can get into recovery to use it.
By the way, sorry about the duplicate post, but I don't know how to edit the original title of the thread.
babblerx said:
Hoping you might have some other ideas.
Will I be able to do anything via ADB (not that I've used it, but willing to try just about anything now)? I've also got a goldcard, not that I can get into recovery to use it.
.
Click to expand...
Click to collapse
see if the steps here solve your problem:
http://theunlockr.com/2010/06/07/how-to-unroot-the-htc-desire/
some more on the same topic using your gold card:
http://android.modaco.com/content/htc-desire-desire-modaco-com/307683/howto-unroot-your-htc-desire/
Hey did you try this??
http://forum.xda-developers.com/showthread.php?t=831734
still no joy...
celestialspring said:
see if the steps here solve your problem:
http://theunlockr.com/2010/06/07/how-to-unroot-the-htc-desire/
some more on the same topic using your gold card:
http://android.modaco.com/content/htc-desire-desire-modaco-com/307683/howto-unroot-your-htc-desire/
Click to expand...
Click to collapse
I've tried the unlockr method. The RUU shows the current image version on the phone as 2.29.405.2. The RUU exe I've tried to flash is the original T-Mobile stock (RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed.exe). This appears to complete the first 4 stages of a ROM flash but then reports an error at the 'Sending' stage - ERROR [140]: BOOTLOADER VERSION ERROR.
I've also tried the above with what I believe to be the latest non branded stock rom (RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe) - 2.29.405.5 obviously being newer than 2.29.405.2 which RUU reports as being already on the phone. This time I get ERROR [131]: CUSTOMER ID ERROR.
I then tried the Modaco steps (your second link). This time, the RUU process went through all the steps but at the end brought up ERROR [152]: IMAGE UPDATE ERROR. This time though, the RU utility gives the option to start a 'Recover' process. There are 4 steps to the Recover process.
There is a ReadMe file available when I get error 152 which states:
4. Q: During the update, the progress bar is moving. If the error message (ERROR [150], [151]…[159]) appears, what should I do?
A: This may occur when the connection is lost, power is lost, the computer host is down, or due to other unexpected reasons. You will see some information on the Android phone’s screen. If the progress bar is moving, it means the update is processing, and your Android phone will reboot automatically and the update is successful. If your Android phone's screen shows exclamation marks in four corners, it means the update has failed. The Android phone will not be able to go into the Android screen. This problem usually can be recovered. You need to follow the instructions in the error message box, which is to reset the Android Phone and run the RUU again.
This seems to indicate the problem is to do with the connection between the phone and the PC. So I'm goning to perservere.
I have a couple of things still to try but am off to the football, I will update you later after I've tried these other things (including a different USB cable)
In the meantime, if you have any other suggestions I'd be happy to hear them. (I did look at the link in your post #14, but it refers to SLCD screens and mine is AMOLED, so reluctant to try that yet).
Thanks for the help, advice and tips so far,
Rich
babblerx said:
This seems to indicate the problem is to do with the connection between the phone and the PC. So I'm goning to perservere.
Rich
Click to expand...
Click to collapse
Did u try a different pc?
still no luck
celestialspring said:
Did u try a different pc?
Click to expand...
Click to collapse
Haven't tried a different PC yet. Have tried a different USB cable on the same PC as I've been using up to now, but that didn't work.
Will try a different PC tonight, though I don't really understand how that would work as the drivers, USB cable and ROM image will still be the same. Still going to give it a go though...at this stage I'll try just about anything.
If you've heard of any other fixes, then I'd love to hear them.
By the way, I tried the vol up and power button combo, but it didn't do anything. The only combo I know is vol down and power to bring up recovery menu. With black recovery screen with exclamation mark in each corner, none of the key combos do anything.
[UPDATE] Tried a different PC and, as I suspected, it didn't work
Rich
I think I've exhausted all options
After trying all of the hints and tips I've been given so far and a few I've found myself, I ve come to the conclusion the only way to fix the phone will be with a newer version of the ROM already installed (though I've tried one and that didn't work) or wait for an official T-mobile Gingerbread release (though I'm not sure they will do that).
It's all really annoying when all I really wanted to root for was to enable more storage on my phone - let's face it the storage space for apps on stock android phones is pathetic! If the manufacturers actually gave more storage for apps then I wouln'd feel the need to root.
Anyway, if anyone still has any (reasonable) suggestions after all of this then I'm still happy to hear them.
sorry mate, thats all I have for you.
Thanks anyway
celestialspring said:
sorry mate, thats all I have for you.
Click to expand...
Click to collapse
Cheers anyway CelestialSpring. I might wait to see if Doridzone resurfaces with any other suggestions (I've emailed him a few days ago, but no reply).
Failing that I might have to bite the bullet and send it to HTC for a (paid for,due to void warranty) fix.
Rich
i ask as i updated my radio last night for the 1st time in aaages and the phone turns on etc as you'd expect. since then though (this morning) i've had random reboots. i've got recovery images of different roms and both do the same.
i tried a clean install of a new rom and it reboots while installing, i try to install again and this time it gets to the "press on the droid" option when it reboots again.
tommo123 said:
i ask as i updated my radio last night for the 1st time in aaages and the phone turns on etc as you'd expect. since then though (this morning) i've had random reboots. i've got recovery images of different roms and both do the same.
i tried a clean install of a new rom and it reboots while installing, i try to install again and this time it gets to the "press on the droid" option when it reboots again.
Click to expand...
Click to collapse
Weird..did u try flashing a different radio?
not yet. in work for a while longer. the only other thing i can see it being, is the kernels in the rom i'm using now, using too little voltage.
might try flashing a different kernel
I have had this problem before & as has been suggested a different radio did solve the problem. Hope it turns out something as simple for you.
As a last resort try wiping and flashing an RUU, that will replace the kernel, radio and rom
yea, had a thought on doing that too. grabbed 2 of em (not sure which i need) but today it's not rebooting
ok, somethings gone real wrong now. cant do anything more than go into fastboot. recovery causes a reboot with 7 vibrations on the boot screen and it wont go past it. i can go into fastboot/fastboot usb and that's it.
how do you flash a ruu now? i found a guide but it refers to downloading .zip images and putting em on an sdcard? i could only see .exe ruus
Just run the ruu exe while your phone is connected in fastboot. Do you have the ruu that was originally on the phone?
Sent from my HTC Desire using Tapatalk
trying it now. got the ruu downloaded. tried it before but got some funky errors
phones doing some funky stuff at the mo. if this works (i hope) then i can use unrevoked and then alpharev to get root/s-off later again yea?
ta mate
Yeah, you can do that.
Sent from my HTC Desire using Tapatalk
coolio.
worked. now booted up. wonder what the hell happened though!
Dunno but I guess you're relieved
Sent from my HTC Desire using Tapatalk
i am, but tried 2 pcs and my netbook, installed usb drivers off their site but just cant get unrevoked working for my desire.
off to try the old goldcard method
odd, even the goldcard tool didnt work. did a year or so ago when i 1st rooted. had to go old school on this thing.
edit
and after several tries, alpharev doesnt work
cant make the phone reboot when it needs to. worked last time with opendesire with no probs at all. no joy with oxygen though, or the default sense rom
ok, thanks to the forum, i've got opendesire installed now and i think somethings up. after an install (clean) it locked. hard. 3 finger salute didn't reboot the phone and had to pull the batt out (other roms caused reboots instead). i decided to take the sim out - and nothing. no more locks/reboots at all.
i'm gonna try the sim in another phone tonight and see what happens.
something very off with this phone.
tommo123 said:
ok, thanks to the forum, i've got opendesire installed now and i think somethings up. after an install (clean) it locked. hard. 3 finger salute didn't reboot the phone and had to pull the batt out (other roms caused reboots instead). i decided to take the sim out - and nothing. no more locks/reboots at all.
i'm gonna try the sim in another phone tonight and see what happens.
something very off with this phone.
Click to expand...
Click to collapse
I had this problem after I flashed a radio. I ended up sending it back to O2 due to a corrupt radio/cpu stack on the actual device.
Hey i hope all is good.
I really need your help. I have a TILT 2 cell phone and by mistake a friend activated the bootloader. Previously the ROM has been updated. the phone got stuck in that screen and the only way to turn it off is removing the battery. so, i try to reboot the phone and it only loads the bootloader with a flash message saying "no image file". ok, i though, the ROM was damaged and after reading a lot in the forums, i followed the instruction to put a new ROM. I connected the phone the the computer and the message in the phone changed to USB and my PC installed the HTC USB Sync driver (but Active Sync does not detect the phone); anyways, i ran the task 29 and a new rom. I was able to see the progress bar in both (PC and Phone) but then the phone reboots and loads again the bootloader. I tried to use the HARD SPL 1.00 as well but it does the same thing after finishing the flash it loads again the bootloader.
can some help me pls?? i'm new in this and the phone is a work tool for me i really need your help.
rgds
You should do the HSPL before flashing a ROM (unless it was already done).
I would try to flash the newest HSPL, then a ROM.
Hi, and thank you for you reply.
I already did it and apparently it flashed the HSPL . Now in the bootloader says SPL 0.85 OliMex; then i flashed the ROM and it showed me the progress bar in both system (PC and phone) but when it finish it booted back to the bootloader. I just noticed that sometimes (after been off for a while) if i turn it on it boots to the rom but it happens randomly and if I turn it back off i just got the bootloader again.
I really need your help pls
jsolanon said:
Hi, and thank you for you reply.
I already did it and apparently it flashed the HSPL . Now in the bootloader says SPL 0.85 OliMex; then i flashed the ROM and it showed me the progress bar in both system (PC and phone) but when it finish it booted back to the bootloader. I just noticed that sometimes (after been off for a while) if i turn it on it boots to the rom but it happens randomly and if I turn it back off i just got the bootloader again.
I really need your help pls
Click to expand...
Click to collapse
Hrm, have you tried doing a task29? Re-flash the ROM after task29.
yes already tried the task 29 and then flash the rom but the same issue...i've been reading a lot of post regarding issue with the bootloader and follow the instruction but nothing seems to work. I even tried the update from the AT&T site but the same issue...i have no idea what else to do
jsolanon said:
yes already tried the task 29 and then flash the rom but the same issue...i've been reading a lot of post regarding issue with the bootloader and follow the instruction but nothing seems to work. I even tried the update from the AT&T site but the same issue...i have no idea what else to do
Click to expand...
Click to collapse
So you've flashed the stock ROM? Have you tried relocking? Probably won't do much, but worth a shot I guess.
When you flash back to stock you flash the stock ROM, then relock, then reflash stock.
Yes, but the issue persisted.
I have noticed something. If i leave the cell phone turn off for a while (hours) and then i turn it on. Most of the time it works and all the things are fin; but as soon as i turn it off and turn it back on the bootloader starts appearing.
So, now i can use the cell but i cannot turn it off or leave the battery died on me...any suggestions?
BTW, thank you very much for your help
jsolanon said:
Yes, but the issue persisted.
I have noticed something. If i leave the cell phone turn off for a while (hours) and then i turn it on. Most of the time it works and all the things are fin; but as soon as i turn it off and turn it back on the bootloader starts appearing.
So, now i can use the cell but i cannot turn it off or leave the battery died on me...any suggestions?
BTW, thank you very much for your help
Click to expand...
Click to collapse
My phone is never turned off. I'm not sure what else to suggest, you've tried seemingly every step that could remedy this problem. Radio firmware probably won't help, but it shouldn't hurt either - you could try a new radio...
hi , this happened to me, solved it by reloading the rom again via sd, once it finish maybe you will see the bootloader screen again, so with stylus pres the reset buttom a few times until the rom boot , this can take several times to make it boot. after revive your cell , do a task29 then reload the rom again then do a hard reset, this happened to my 2 times, and its still alive ,good luck.
Same Problem
Hi,
I'm having the same problem. Installed the latest official ROM from HTC/ATT (gorgeous), and same problem after install. Whenever you try to reboot, it gets stuck in the bootloader screen. The last 50 tries it will not reboot at all, even after removing the battery and hitting the power button. This used to work occasionally.
Any other process anyone knows for getting the device to read the ROM?
Is the phone just worn out?
I suggest you reflash the shipped rom to your device and after the flash finishes and your device begins to boot immediately remove the battery to turn it off before it boots. Then replace the battery and press and hold the Send and End keys and while holding them down press the Power button and follow the instructions to factory reset(hard reset).
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says
bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.
even if it is its covered by htc warranty so don't worry about it
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Flash bravo_downgrade.img and then the RUU.
Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl
Nevermind, I got it to work
So write how to help others and if we helped you, use the thanks-button.
bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!
hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?
Did you read the whole thread????
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk
but i dont know how to do it from fastboot. i need an explaination of the process.
HI. Okay, so a couple weeks ago, I received a notification from HTC that said there was a new update available. Since I had S-Off and an unlocked bootloader (don't ask why, I just ****ing do.) I could not update, as it would give me errors, and cancel the update. So, earlier today I was fed-up with how slow my phone was being, and I wanted to fix it by updating. So I scoured XDA and found a thread about how to update by updating the HBoot or whatever. I followed those instructions and everything was fine, until I got to the initial part of installing the new **** through RUU. It was running fine, and then all of a sudden, the phone disconnected and ****ed the installation up. My battery was fully charged, and still has a charge as I am writing this. I digress. Whenever I would try to power my phone on, I would feel THREE (3) vibrations, and nothing would happen after. I tried booting into the stock recovery (fastboot, recovery, etc) and would still get THREE (3) vibrations. Bricked. So, I looked through a few threads on XDA, and found a few ways to fix it. Something about a Blind HBoot, or a Qualcomm Diagnostic Mode being stuck or something. Figured it was my best shot to try these. I tried them all. I put the PG76IMG.zip into my SD card, and booted up when holding Volume down, and only got THREE (3) vibrations. The tutorial said I was supposed to get FIVE (5) vibrations. So, I thought maybe it was something strange, and kept going through the tutorial. After five minutes, I'm supposed to press VOL UP, and should feel THREE (3) vibrations. Nothing happened. I waited and waited and tried again, and still, nothing. My phone is still lying here as a paperweight, and I want to get this working, so I can sell it because this phone is too much of a ****ing hassle for me. NOTHING HAS WORKED. ROMS, KERNELS, NOTHING. HAS. WORKED. I'M TIRED OF IT. I'm not a noob, I've been working with Android phones for a long time, and have never quite used an HTC device before. I had a Samsung Galaxy S Fascinate (CDMA) and it lost it's flash after I had moved to a different state. (The state I'm in does not have any towers for that carrier here.) SO. Can ANYONE give me a HIGHLY DETAILED tutorial, STEP BY STEP, to fix my phone?
HTC Wildfire S *Relocked* bootloader S-OFF CDMA METRO PCS.
I have tried everything I can find, and I have reached my wits end, man. Please, for the love of GOD, help me. I would really appreciate it.
I had 1000 rom flashes
3 Updates through RUU
Never had a brick
I hope someone can help you.
This is same as this thread http://forum.xda-developers.com/showthread.php?t=1522235
m1ndh4x8r said:
I had 1000 rom flashes
3 Updates through RUU
Never had a brick
I hope someone can help you.
This is same as this thread http://forum.xda-developers.com/showthread.php?t=1522235
Click to expand...
Click to collapse
I don't see how this helps me.
Help in the sense u have sent it to HTC for repair
Try this http://forum.xda-developers.com/showthread.php?t=1432425
Sent from my HTC_A510c using Tapatalk
kyleisah said:
HI. Okay, so a couple weeks ago, I received a notification from HTC that said there was a new update available. Since I had S-Off and an unlocked bootloader (don't ask why, I just ****ing do.) I could not update, as it would give me errors, and cancel the update. So, earlier today I was fed-up with how slow my phone was being, and I wanted to fix it by updating. So I scoured XDA and found a thread about how to update by updating the HBoot or whatever. I followed those instructions and everything was fine, until I got to the initial part of installing the new **** through RUU. It was running fine, and then all of a sudden, the phone disconnected and ****ed the installation up. My battery was fully charged, and still has a charge as I am writing this. I digress. Whenever I would try to power my phone on, I would feel THREE (3) vibrations, and nothing would happen after. I tried booting into the stock recovery (fastboot, recovery, etc) and would still get THREE (3) vibrations. Bricked. So, I looked through a few threads on XDA, and found a few ways to fix it. Something about a Blind HBoot, or a Qualcomm Diagnostic Mode being stuck or something. Figured it was my best shot to try these. I tried them all. I put the PG76IMG.zip into my SD card, and booted up when holding Volume down, and only got THREE (3) vibrations. The tutorial said I was supposed to get FIVE (5) vibrations. So, I thought maybe it was something strange, and kept going through the tutorial. After five minutes, I'm supposed to press VOL UP, and should feel THREE (3) vibrations. Nothing happened. I waited and waited and tried again, and still, nothing. My phone is still lying here as a paperweight, and I want to get this working, so I can sell it because this phone is too much of a ****ing hassle for me. NOTHING HAS WORKED. ROMS, KERNELS, NOTHING. HAS. WORKED. I'M TIRED OF IT. I'm not a noob, I've been working with Android phones for a long time, and have never quite used an HTC device before. I had a Samsung Galaxy S Fascinate (CDMA) and it lost it's flash after I had moved to a different state. (The state I'm in does not have any towers for that carrier here.) SO. Can ANYONE give me a HIGHLY DETAILED tutorial, STEP BY STEP, to fix my phone?
HTC Wildfire S *Relocked* bootloader S-OFF CDMA METRO PCS.
I have tried everything I can find, and I have reached my wits end, man. Please, for the love of GOD, help me. I would really appreciate it.
Click to expand...
Click to collapse
ok, im not saying i can get it going again but i`ll do my best to help. lets start from the beginning, what actually works atm? you say when you try boot up the phone in any way it just vibrates 3 times.
does it do anything else, does the screen light up?
does it even stay on?
when you connect it to the charger does the led still light up?
have you tried to connect it to the pc? have you tried to connect it too the pc with volume down first?
all seem very basic stuff obviously but if the pc can register it in hboot we might be able to get a ruu running on it.
Found this on a different thread...
Nevermind. Just realized you were still getting three vibrates. Sorry man. I'll keep an eye out if I see anything else that might help.
what is your hboot version? i was see 1.09.099 like in forum maybe you can start with update hboot.
you can use adb for all of this works. download a ruu and run it. after some steps you can find rom.zip in windows/temp extract it to a folder like c:\android\rom and use adb for install all *.img files. maybe it can fix that problem
hypercode said:
what is your hboot version? i was see 1.09.099 like in forum maybe you can start with update hboot.
you can use adb for all of this works. download a ruu and run it. after some steps you can find rom.zip in windows/temp extract it to a folder like c:\android\rom and use adb for install all *.img files. maybe it can fix that problem
Click to expand...
Click to collapse
seriously , adb can install img files ?!
Alright, well, I called htc and told them about my problem, and I might have to just send it in. BUT. I had my phone rooted, and had CM Recovery on it. So, since nothing is booting up at all, only the three vibrates when trying to enter either boot mode, will they be able to see that I had it rooted or anything? They said they'll charge 35$ just to ship it back in the same condition if it is. Can't really afford anything like that right now.
tl;dr I had my phone rooted, but nothing on my phone comes up, will they see my root or anything?
if you are rooted you are probably s-off or at least have unlocked bootloader. and both they will find out very easily.
Sorry for my bad it was fastboot.exe you can install .img files with fastboot.exe i was installed stock recovery with that
Sent from my HTC Wildfire S A510e using XDA App