My screen dim level is at 1 and my phone is still too bright. How could I reduce this even further so that sliding my brightness toggle in the notifications bar all the way to low will reduce the brightness even further? Is there not an option or a mod that allows you to pretty much dim your screen to complete darkness?
zetsui said:
My screen dim level is at 1 and my phone is still too bright. How could I reduce this even further so that sliding my brightness toggle in the notifications bar all the way to low will reduce the brightness even further? Is there not an option or a mod that allows you to pretty much dim your screen to complete darkness?
Click to expand...
Click to collapse
screen filter from playstore
harshrp11 said:
screen filter from playstore
Click to expand...
Click to collapse
I see screen filter, the only problem I have with it is its persistent notification. As far as I can see there's no way to remove it. If I could get rid of the persistent notification I would set it to boot with tasker.
Suggestions to remove from notification?
Try lux auto brightness not sure if it has persistent notification or not.
jefferson9 said:
Try lux auto brightness not sure if it has persistent notification or not.
Click to expand...
Click to collapse
I know about lux too, but it's not what I need.
Is there a way to lower the brightness set by the kernel or is this unchangeable?
Download screen calibrator and it works like a charm, you can also remove the icon from the status bar
Sent from my SGH-I747 using xda app-developers app
I looked into this too, I believe the only option is screen filter or anything like it.. which makes no sense to me.
Lower brightness = better for eyes+battery
i386W7 said:
I looked into this too, I believe the only option is screen filter or anything like it.. which makes no sense to me.
Lower brightness = better for eyes+battery
Click to expand...
Click to collapse
Yeah I actually prefer the dropdown notification built into AOKP roms for brightness, but the lowest brightness is too bright. In a room with lights off, reading the amazon kindle before bed is pretty discomforting if you're trying to ease into sleep. Way too bright.
Apparently the only way to do it unless the screen filter author comes up with a way to get rid of that persistent notification/load on startup is to kernel hack, and personally for someone who isn't a developer/programmer, I wouldn't touch an opensource code with a stick
I have the same problem. The lowest brightness is still too high to read something with the lights off.
Hey, I think I actually found something.. do you have cm10? If you do, you can turn on screen filter normally then go to settings > apps > screen filter and uncheck "show notifications". That took away the persistent notification for me.
I don't know if you can do this in aopk.
i have a great solution (with a notification-so i will try your suggestion 386 once my rom is done backing up), but want to make my own personalized "build (apps, tweaks etc) thread". Where can I make it without getting slapped by the mods? In the galaxy s3 general thread or since most of it is can be done on different android phones in the the overall general thread?
Related
Hi,
automatic backlight is still too bright for me in almost any environment. I want to control the brightness of the screen by setting other values.
Is there an app or a hack to do this?
Good question. Loved to know too!
Look under widgets and you will find one called
"Brightness"
I'll let you figure the rest out for yourself
topcaser said:
Hi,
automatic backlight is still too bright for me in almost any environment. I want to control the brightness of the screen by setting other values.
Is there an app or a hack to do this?
Click to expand...
Click to collapse
Try to using
Brightenes Level App
I recommend "SwitchPro Widget", which is available from the Marketplace. It allows you to toggle the brightnees, even to levels lower than the automatic setting.
Hi, i dont want to change brightness manually, but want to change the default values which are used for automatic brightness. Is this possible?
Does no one knows??
Hmmm would be handy!
topcaser said:
Hi,
automatic backlight is still too bright for me in almost any environment. I want to control the brightness of the screen by setting other values.
Is there an app or a hack to do this?
Click to expand...
Click to collapse
Perhaps you could put some tinted glass/plastic over the sensor, so the phone thinks it's darker than it actually is and doesn't make the screen as bright?
poldie said:
Perhaps you could put some tinted glass/plastic over the sensor, so the phone thinks it's darker than it actually is and doesn't make the screen as bright?
Click to expand...
Click to collapse
good idea, but that's not the resolution, even in night it's very bright and for me even at manual 1% brightness it's a bit to bright for me...
would be awesome to have more possibilities to work with the amoled screen - by the way - for black it needs 0% energy so better to read white letters on black background
edit: me using "Quick Settings" to handle brightness etc.
Hi I am using dimmer lite download frm market place suits my usage
-------------------------------------
Sent from my HTC Desire
topcaser said:
Hi,
automatic backlight is still too bright for me in almost any environment. I want to control the brightness of the screen by setting other values.
Is there an app or a hack to do this?
Click to expand...
Click to collapse
settings/Sound & Display/Brightness
&
widgets/power control
I would like the automatic brightness to be just a bit more brighter when im outside. Would be great to be able to adjust it!!
If there was something like a -2 -1 0 +1 +2 way to adjust it!
Dont want manually keep setting the brightness all the time.
I just tried the app called Dimmer.
It is perfect.
Goes to a very low setting and then switches back to whatever you had before.
I have the same problem with my Desire that the Auto Brightness doesn't go all the way down and the HTC Denmark support basically just said meh. And said they would report it as a wish for future updates.
ZigmaDK said:
I just tried the app called Dimmer.
It is perfect.
Goes to a very low setting and then switches back to whatever you had before.
Click to expand...
Click to collapse
This app is great! Thank you!
I have my phone on autobacklight, but I find that in dark settings its too bright!!
This app does what I want with a simple click! Shame however that there's no way to reduce the lowest brightness on auto setting built into the OS.
So is there a way to lower it? Like, sometimes I use screen filter. But there's gotta be a way to make the brightness go lower
sent from my always aosp epic
Try this: Touch the main pull down menu bar but besides pulling it down when it pops up swipe from right to left to lower brightness, and left to right to increase brightness... I'm not sure if this is what your talking about or if this feature's included in your rom but it always helps me because I'm an "auto brightness off" kinda dude haha
*note you'll have to turn auto brightness off in the settings menu under the display option for this to work.
I don't think that will work for him because he's on an AOSP ROM (assuming your sig is correct) and he wants a screen brightness lower than what's available.
I don't know of a way, but I'm curious as to why you'd want something like this.
the_details said:
I don't think that will work for him because he's on an AOSP ROM (assuming your sig is correct) and he wants a screen brightness lower than what's available.
I don't know of a way, but I'm curious as to why you'd want something like this.
Click to expand...
Click to collapse
Yeah, besides even on a touchwiz rom I delete that apk so it doesn't work anyway. And A LOT of people would like this, its why there's screen filter on the market. I just want a native way
sent from my always aosp epic
New on the Market:
https://market.android.com/details?...mkub21lZ2FjZW50YXVyaS5TY3JlZW5EaW0uVHJpYWwiXQ..
"Is your minimum screen brightness still too bright? Dim your screen below what your device normally permits for comfortable use in darker environments, reading in bed, amateur astronomy, etc.! No root required."
I find this app indispensable for comfortable reading at night.
Thank you so much for this, I was just thinking last night that even the dimmest setting on the A100 was still to bright
Sent from my EVO Shift 4G
Brilliant find, normally use the Kindle when reading in bed but the web browser is diabolical.
Toyface
Sent from my A100
Try screen filter from market instead....its free
Sent from my ADR6400L using XDA App
jimmyUT said:
Try screen filter from market instead....its free
Click to expand...
Click to collapse
I'm the ScreenDim developer. Screen Filter is free and clever, but it doesn't do the same thing as ScreenDim, at least not on LCD devices. Screen Filter basically just alpha-blends a dark box over the screen, without lowering the backlight level below what the OS normally allows. The result is that Screen Filter lowers the contrast and the color resolution, and in a dark room, the blacks will be gray because of the backlight shining through them.
ScreenDim allows you to both lower the LCD backlight level below what the OS normally allows on many devices and, if that's not good enough, to control the contrast just as Screen Filter does. Furthermore, because ScreenDim allows you to lower the backlight level, it will save on batteries in a way in which Screen Filter will not, again on LCD devices. (On OLED devices, there is much less of a difference.)
Moreover, my testing on my Archos 43 indicates that Screen Filter lowers the 2D rendering performance by about 30%. ScreenDim at 100% contrast shouldn't affect the 2D rendering, and even with the contrast adjust, I couldn't measure a noticeable 2D performance loss.
For real free alternatives to ScreenDim on backlit devices, there are AdjBrightness and my RootDim, both in the Market. Both require root, however. And ScreenDim's dual brightness-contrast adjustment feature is found in neither.
+1 for root dim, I use it and it works well on this tab and my atrix
be careful not to set it to 1 because its turns off the screen but the tablet is still on. i got stuck trying to find the slider to slide it back so i can see the screen again. nice find though.
Sent from my SCH-I500 using xda premium
jahciple said:
be careful not to set it to 1 because its turns off the screen but the tablet is still on. i got stuck trying to find the slider to slide it back so i can see the screen again. nice find though.
Click to expand...
Click to collapse
Tapping random places on the screen should quickly restore the brightness.
Also, if the tablet has volume buttons, you can adjust brightness with them.
Once you figure out what the lowest you can go is, go to Options | Set minimum brightness. Then you won't have this worry any more.
screen filter
Love screen filter it works great and its free, super simple, plus pop notification bar too. Awesome app. Screen filter is
https://market.android.com/details?...ch_result#?t=W251bGwsMSwxLDEsImNvbS5oYXhvciJd
Screeeeen filter link above!
arpruss said:
Tapping random places on the screen should quickly restore the brightness.
Also, if the tablet has volume buttons, you can adjust brightness with them.
Once you figure out what the lowest you can go is, go to Options | Set minimum brightness. Then you won't have this worry any more.
Click to expand...
Click to collapse
ahem. I'm not sure exactly where those buttons were when I needed them to try to get the brightness restored, but I couldn't find them on two occasions. I had to hard power off.
Great idea but it won't work for me unfortunately. I want something that will turn my tablet into pure darkness except for a small, dimly illuminated, clock on the screen. No matter what I find, an app always has too much backlight on and it bothers me when I'm trying to sleep.
If only I could get this app to interact with my alarm clock app somehow!
Status bar
Is there any way to remove the status bar icon of the ScreenDim?
I thought the app was designed to reduce distraction while using a device, but the icon being in the most prominent spot (upper left corner) draws attention constantly.
Hello Everyone,
I have a problem with my amami and I doubt I am the only one but for some reason people do hardly complain: the brightness even at lowest possible setting is still too bright.
I had this back when I had original FW and I am having the same issue with CM11 (latest nightlies). Using manual control or auto-brightness doesn't make much difference, i.e. in a totally dark room the ambient light sensor reports 0Lux and the screen is still too bright.
I found a workaround already (the ScreenFilter app that people recommend all over the internet) but it sucks because it heavily reduces the picture quality, i.e. visibly reduces contrast and especially the gray color resolution. And it also doesn't reduce power consumption like real brightness value change would do.
I looked around for possible solutions and there is a trick with writting a new value of current limit to Linux settings (some mA value between 0 and 20 to some max_current file in procfs). And this really helps but also impacts the maximum brightness, the screen is hardly ready in sun light with reduced current.
Is there a silver bullet? I am thinking about writing an app for that but it would require SU permissions and is kinda dirty to implement. Can anyone recommend a better solution?
have you tried the xposed Modul "minimum brightness" ?
Install Lux Brightness. from play store.
You can overboost it or make the screen so dark that you can't even see it.
Another great screen mod is Twilight which basically dims the screen red based on clock so it helps fall sleep faster when using phone before bed.
New Folder said:
Install Lux Brightness. from play store.
Click to expand...
Click to collapse
Yes, another vote for Lux. It lets you set brightness to negative levels, mine is usually around -50%. https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Vote for Lux here too.
Nothing comes close
camaro322hp said:
Yes, another vote for Lux. It lets you set brightness to negative levels, mine is usually around -50%. https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Click to expand...
Click to collapse
Thanks for the hint. I tried the Lite version and AFAICS it simply uses the same trick as ScreenFilter and other "sub-zero" regulators, putting an alpha overlay on top of the image stack.
You can identify this kludge easily by looking at the button areas, they don't get darker anymore. And you can see the black level not getting real black, i.e. the power consumption is not reduced.
However, Lux seems to be one of the better toys because of the plugin interface. Unfortunately there is no HW plugin for Sony devices but judging by the quick look at the Nexus-4 plugin (it's open source!!) it should be possible to adopt this method to Z1 as well. So, maybe when someone could eventually implement that.
xposed Modul "minimum brightness" works, i tested it for you. you can make the screen dim to complete black with your normal display brightness slider without grey or black overlay. it just sets down the minimum brightness level to 1 or 0 (default is 10 or 20), so it should also work with enabled auto brightness
chertVdetali said:
I looked around for possible solutions and there is a trick with writting a new value of current limit to Linux settings (some mA value between 0 and 20 to some max_current file in procfs). And this really helps but also impacts the maximum brightness, the screen is hardly ready in sun light with reduced current.
Click to expand...
Click to collapse
As far as i remember, /proc is only used to call upon information, not to set specific values. What you are looking for is placed within /sys.
To be precise in /sys/devices/leds-qpnp-ee125e00/leds/wled:backlight/. There you will find a file called max_current with which you can easily control the brightness and set it to a very low level. Note that this actually dims the screen and not just applies a filter like most apps do...
One drawback is that the value will change again after you restarted the device. I set up a little flow with Automate β that takes care of this for me. I find this solution a lot better than all the screen filter apps.
This is true for CyanogenMod 11 and GreatDevs Kernel. It might be different on Stock. I know that the path for my Nexus 7 is sys/class/leds/lcd-backlight.
I hope this helps you a little bit.
rob rich said:
xposed Modul "minimum brightness" works, i tested it for you. you can make the screen dim to complete black with your normal display brightness slider without grey or black overlay. it just sets down the minimum brightness level to 1 or 0 (default is 10 or 20), so it should also work with enabled auto brightness
Click to expand...
Click to collapse
I am wondering how you can claim that the result is complete black. Calling this black is like saying "TN monitors have good black values" (I know such people, they change their mind quickly when they see my Eizo with a VA panel at night).
No, seriously, the default was already 10 (see config.xml in cm11 repo) and the difference between 1 and 10 is hardly visible. It's still way too bright for work without eye strain in the darkness.
@Wooaarr: thanks, this is apparently the way to go, I just need to find time to configure it. And yes, of course, the file is in sysfs and not procfs (automated typing, when I grew up with Linux there was no sysfs out there ).
chertVdetali said:
I am wondering how you can claim that the result is complete black. Calling this black is like saying "TN monitors have good black values" (I know such people, they change their mind quickly when they see my Eizo with a VA panel at night).
No, seriously, the default was already 10 (see config.xml in cm11 repo) and the difference between 1 and 10 is hardly visible. It's still way too bright for work without eye strain in the darkness.
@Wooaarr: thanks, this is apparently the way to go, I just need to find time to configure it. And yes, of course, the file is in sysfs and not procfs (automated typing, when I grew up with Linux there was no sysfs out there ).
Click to expand...
Click to collapse
when i disable autobrightness and push the slider to the left my screen goes completely off, so you wanna say that screen off isnt black? funny
chertVdetali said:
Thanks for the hint. I tried the Lite version and AFAICS it simply uses the same trick as ScreenFilter and other "sub-zero" regulators, putting an alpha overlay on top of the image stack.
You can identify this kludge easily by looking at the button areas, they don't get darker anymore. And you can see the black level not getting real black, i.e. the power consumption is not reduced.
However, Lux seems to be one of the better toys because of the plugin interface. Unfortunately there is no HW plugin for Sony devices but judging by the quick look at the Nexus-4 plugin (it's open source!!) it should be possible to adopt this method to Z1 as well. So, maybe when someone could eventually implement that.
Click to expand...
Click to collapse
Interesting information, I did not know that. You are correct, the navigation buttons are brighter than the rest of the screen at negative values. I had noticed that before but didn't know why. Works well enough for me though.
rob rich said:
when i disable autobrightness and push the slider to the left my screen goes completely off, so you wanna say that screen off isnt black? funny
Click to expand...
Click to collapse
Well, you claim that it works for me because you tested it on your device. So... yeah, why not, I could say what you mentioned above just following the same logics. :silly:
Is there a way to brighten the ambient display, such as the clock and notifications that appear? I can barely see it in the sun. I had no problem seeing my moto z play in the sun.
sruel3216 said:
Is there a way to brighten the ambient display, such as the clock and notifications that appear? I can barely see it in the sun. I had no problem seeing my moto z play in the sun.
Click to expand...
Click to collapse
If you go into settings / display there is a brightness slider that you can use to manually set the screen at a brighter level. I'm not sure if that recalibrates the base Android uses in its ambient settings or not. If you just are used to a brighter screen and find that the ambient setting continues to make the screen dimmer than you like after using the slider you can just turn the ambient display feature off entirely. I personally like the feature but a lot of people don't and just turn it off.
There are also apps in the Play Store that allow you to manually adjust the screen brightness without going into the settings menu, if you want to have easier control over it.
jhs39 said:
If you go into settings / display there is a brightness slider that you can use to manually set the screen at a brighter level. I'm not sure if that recalibrates the base Android uses in its ambient settings or not. If you just are used to a brighter screen and find that the ambient setting continues to make the screen dimmer than you like after using the slider you can just turn the ambient display feature off entirely. I personally like the feature but a lot of people don't and just turn it off.
There are also apps in the Play Store that allow you to manually adjust the screen brightness without going into the settings menu, if you want to have easier control over it.
Click to expand...
Click to collapse
hmm ok. i like the auto brightness. just want to adjust the whites that light up when you receive notification
sruel3216 said:
hmm ok. i like the auto brightness. just want to adjust the whites that light up when you receive notification
Click to expand...
Click to collapse
I misunderstood your post then. Sorry.
sruel3216 said:
Is there a way to brighten the ambient display, such as the clock and notifications that appear? I can barely see it in the sun. I had no problem seeing my moto z play in the sun.
Click to expand...
Click to collapse
I know that the AOKP ROM allows alot of modifications to the ambient display brightness settings. Other ROMs may do the same but I know and use the settings on AOKP. It's a very good ROM! Native settings don't have the options.
AOKP and Pixel Dust are the two roms I know of that have this option.
You don't need a ROM to kick in higher brightness on auto brightness.
Just root and install ElementalX kernel or one based on it.
Then install this widget and once toggled, it will give you way more max brightness on auto brightness.
https://play.google.com/store/apps/details?id=flar2.hbmwidget
I noticed that my wife's phone has significantly brighter ambient display. They have identical settings as far as I can tell. So I'm not sure but I would love to find out the answer cause I want mine brighter too
Go to advanced display settings and toggle off the option to wake the screen with new notifications, then turn off the lift to view gesture. Your ambient display should brighten significantly.