Develop Bugs

[GUIDE]For Starters(Newbies)

NOTE: Noob is not a really good word. kinda discriminating. newbie better.
THIS will GUIDE how to get on foot if your just starting on Galaxy Y, most probably, ANDROID
1. First Things first. Know your Phone. before doing anything, just be on the stock for a while. Know all the things, settings, install some app and alike. This way, you'll know your way through. See apps like market, Maps and others, check bugs etc.
2. Second part is knowing a basic tweak of your phone, to be exact: BATTERY SAVINGS. Know your way from this apps. See how they handle your battery life. The purpose of this is to know the performance of your phone
3. So you feel much better knowing your phone, you can start rooting or installing some replacement apps Go, ADW, Pansi, Popups, keyboards its up to you. But i dont recommend instant rooting when your just getting on foot.
Rooting wont brick the phone, maybe but its in the least.
(I wont be giving links for many threads here are available already. Its hard just to give you everything when researching can't kill one)
WHAT IS ROOTING?
rooting gives you access to the system of your phone. thats it
Soft ROOT-stated in the above
Hard ROOT-gives you access to the commander of the system which allows you to access the device via shell extensions and ADBs
4. Same as step 1. See how does root work for you. Dont just access the system right away using an explorer. look for apps that can help you achieve your desired goal that requires root access. a good start would be RAM tweaks.
5. Removing apps that you dont need. Its the power of Rooting that grants you this. basically, it improves RAM usage and speed of the device especially when "app-example.apk" initiates on its own. ofcourse it increases the capacity of your device.
6. KITCHENS. for a start you can use the UOT kitchen which allows you to modify some parts of the device. as far as i know, mods like transparency, lockscreen and bootanimation wont work on stock dont ask why coz i dunno sorry. so using this kitchen can allow you to change statusbar appearance pull down notif bar, etc.
but, the MAIN concern of a KITCHEN is ROMS.
ROM is the thing that the device reads for it to run properly.
ROM development are for making a benefit that can help a device achieve its fullest performance. Speeding it up, etc.
You can see the Development Page for it
**EXTRAS:
FLASHING
Flashing is a way of updating or down-dating your device.
Odin is the tool used in it.
If KIES wont let u update. Flashing would be good but you just have to download the firmware you want.
PARTITIONING.
since SGY got a small memory for internal, u can use partitions in the SDcard to let it handle some memory for you.
BOOT recovery:
it is where you flash mini updates like rooting CWMod, UOT kitchen mods and others
**Clockworkmod recovery / CWM is a custom CWM it has additional features moreover see for yourself
i guess thats it ill just edit it if somethings new comes
THIS IS FOR NEWBIES, no noob persons exist: ONLY NEWBIES.
hoped this helps you can just PM me for assistance but for now please bear with this simple guide thanks
PS: im no dev but as soon as i got my laptop ill start im just using a netbook and my phone for learning. so thanks

good tutorial for newbies and i try to make a rom,but i dont if can i brick my phone from errors.I read many things before make a rom.
JuSt pReSs THANKS if i HeLLpeD yOu

Yap. Rom manager is not yet working for G-Y dont be afraid. Ive bricked my phone a dozen times alrready.
-- [email protected]

what happens if sm1 bricks his phone??

If soft, phone wouldnt boot properly though can go to download mode
Hard, cant open even boot recovery
-- [email protected]

nice post there man or rather master? hehehe ( you are now my master ) , i really think this thread should be sticky.
very informative for the newbies out there as a head start, keep on posting and helping here master
if they will be needing another moderator here i will surely vote for you

thanks you so much!

it would be nice to include how to make a hard bricked phone to soft brick

ronnieryan said:
it would be nice to include how to make a hard bricked phone to soft brick
Click to expand...
Click to collapse
Theres a thread already so i cant make one im just here for those who really want to get on their foot
-- [email protected]

[Guide Lines] HARD / SOFT BRICKS FOR GALAXY Y GT-S5360 MOBILE
musashihatred said:
Theres a thread already so i cant make one im just here for those who really want to get on their foot
-- [email protected]
Click to expand...
Click to collapse
ronnieryan said:
it would be nice to include how to make a hard bricked phone to soft brick
Click to expand...
Click to collapse
Guidelines for how to solve HARD / SOFT BRICKS problems FOR GALAXY Y GT-S5360 MOBILE
http://forum.xda-developers.com/showthread.php?t=1498327

musashihatred said:
FLASHING
Flashing is a way of updating or down-dating your device.
Odin is the tool used in it.
If KIES wont let u update. Flashing would be good but you just have to download the firmware you want.
Click to expand...
Click to collapse
can u make a tutorial(step by step) on how to flash using odin? and how to turn on download mode in galaxy y?

jayem123 said:
nice post there man or rather master? hehehe ( you are now my master ) , i really think this thread should be sticky.
very informative for the newbies out there as a head start, keep on posting and helping here master
if they will be needing another moderator here i will surely vote for you
Click to expand...
Click to collapse
aw ) my masteR!!!! long time! D hehe tnx. ^^

ronnieryan said:
can u make a tutorial(step by step) on how to flash using odin? and how to turn on download mode in galaxy y?
Click to expand...
Click to collapse
sure thing but it would be really better if you read some threads here. a lot of those stuffs are already here
1. download the rom you needed/wanted
2. download odin v1.85 w/ totoro.pit
3. turnoff phone remove sim + sdcard
4. open odin and put the files into:
boot
pda
csc
modem
something like that. put there the files you downloaded.
check if re partition etc are checked
then now get the data cable, and put the phone into DL-mode
(HOME+VOL-DOWN+POWER) hold till it boots into DL-Mode
pressing VOL UP- continue
VOL DOWN- Cancel
press the vol up so and youll be on DL mode
connect the cable wait for it to be recognized by the Odin, if ok pray and start.
just takes around a min to do so. the phone then reboots automatically. do a hard rest and boot again.
voila
since your a filipino you can check symbianize.com for infos. reading some guides there by our masters will surely help you
*so as the rules say here read threads first before asking though its ok for me. it would be nice if i'd helped you bro

ronnieryan said:
it would be nice to include how to make a hard bricked phone to soft brick
Click to expand...
Click to collapse
JTAG-ging is only solution to resurrect
a hard bricked phone..

musashihatred said:
NOTE: Noob is not a really good word. kinda discriminating. newbie better.
THIS will GUIDE how to get on foot if your just starting on Galaxy Y, most probably, ANDROID
1. First Things first. Know your Phone. before doing anything, just be on the stock for a while. Know all the things, settings, install some app and alike. This way, you'll know your way through. See apps like market, Maps and others, check bugs etc.
2. Second part is knowing a basic tweak of your phone, to be exact: BATTERY SAVINGS. Know your way from this apps. See how they handle your battery life. The purpose of this is to know the performance of your phone
3. So you feel much better knowing your phone, you can start rooting or installing some replacement apps Go, ADW, Pansi, Popups, keyboards its up to you. But i dont recommend instant rooting when your just getting on foot.
Rooting wont brick the phone, maybe but its in the least.
(I wont be giving links for many threads here are available already. Its hard just to give you everything when researching can't kill one)
WHAT IS ROOTING?
rooting gives you access to the system of your phone. thats it
Soft ROOT-stated in the above
Hard ROOT-gives you access to the commander of the system which allows you to access the device via shell extensions and ADBs
4. Same as step 1. See how does root work for you. Dont just access the system right away using an explorer. look for apps that can help you achieve your desired goal that requires root access. a good start would be RAM tweaks.
5. Removing apps that you dont need. Its the power of Rooting that grants you this. basically, it improves RAM usage and speed of the device especially when "app-example.apk" initiates on its own. ofcourse it increases the capacity of your device.
6. KITCHENS. for a start you can use the UOT kitchen which allows you to modify some parts of the device. as far as i know, mods like transparency, lockscreen and bootanimation wont work on stock dont ask why coz i dunno sorry. so using this kitchen can allow you to change statusbar appearance pull down notif bar, etc.
but, the MAIN concern of a KITCHEN is ROMS.
ROM is the thing that the device reads for it to run properly.
ROM development are for making a benefit that can help a device achieve its fullest performance. Speeding it up, etc.
You can see the Development Page for it
**EXTRAS:
FLASHING
Flashing is a way of updating or down-dating your device.
Odin is the tool used in it.
If KIES wont let u update. Flashing would be good but you just have to download the firmware you want.
PARTITIONING.
since SGY got a small memory for internal, u can use partitions in the SDcard to let it handle some memory for you.
BOOT recovery:
it is where you flash mini updates like rooting CWMod, UOT kitchen mods and others
**Clockworkmod recovery / CWM is a custom CWM it has additional features moreover see for yourself
i guess thats it ill just edit it if somethings new comes
THIS IS FOR NEWBIES, no noob persons exist: ONLY NEWBIES.
hoped this helps you can just PM me for assistance but for now please bear with this simple guide thanks
PS: im no dev but as soon as i got my laptop ill start im just using a netbook and my phone for learning. so thanks
Click to expand...
Click to collapse
I always like this musashihatred guy.
Very active in SGY development issues.
Keep encourage us (the NEWBIES) to learn.
Sent from my GT-S5360 using Tapatalk

bydefault said:
I always like this musashihatred guy.
Very active in SGY development issues.
Keep encourage us (the NEWBIES) to learn.
Sent from my GT-S5360 using Tapatalk
Click to expand...
Click to collapse
THANKS MAN
i just dont like some here that, Hey not for noobs or what. not for this.
but ill be selling my phone in the ff day but i wont leave this forum. ill still develop galaxy y ill be getting galaxy s =="

Video tutorial
ronnieryan said:
can u make a tutorial(step by step) on how to flash using odin? and how to turn on download mode in galaxy y?
Click to expand...
Click to collapse
http://galaxyygaming.blogspot.in/2012/02/flashing-with-odin.html

Thanks.. really helpful..

I just sold my galaxy y.
i sold it earlier. but pls dont stop sending questions and some guides. ill always be free to answer. ill be getting M130k tom. but i will always be here :d

help me get going guys....please

hey,
my girlfriend has a moto defy and im quite in to getting it going to display its full potential as i am sure the this device is not great in its stock state and it seems to have some dugs e.g. freezing a lot etc... you all know what i mean haha. she has not quite grasped the fact that the device will be 1000 times better with a nice build of cm7 but i am having issues with the bootloader and installing cwm based recovery so can you guys give me a step by step guide on how to get this going i would like to see how it takes ics and if they have fixed the issue with the hardware accelerator
thanks a lot if you can help p.s. can you send me the message on the private message option as i will be over at the p6200 tab plus section and not on er haha

Okay.
EDIT2: ***Im tired** sorry. We need root too!
Use superoneclick to root.
Because i've had to edit twice, it's better you read this LOL
http://www.freeyourandroid.com/guide/root-motorola-defy
So, first you need to get ADB. EDIT: This is unecessary! But useful anyway!
This is quite a long process, so follow this guide
Next, you need to get 2nd init, this installs a custom recovery app, which you use to get CM7. Just install the app on the phone, and press install 2nd init.
When it reboots, press the volume key when the LED flashes blue for a couple of seconds.
It is attached.
Okay, now find your chosen rom (plenty on here)
Download it, and put it on your sd card, then install using 2nd init.
Don't forget to follow all instructions!

MainCourse said:
Okay.
EDIT2: ***Im tired** sorry. We need root too!
Use superoneclick to root.
Because i've had to edit twice, it's better you read this LOL
http://www.freeyourandroid.com/guide/root-motorola-defy
So, first you need to get ADB. EDIT: This is unecessary! But useful anyway!
This is quite a long process, so follow this guide
Next, you need to get 2nd init, this installs a custom recovery app, which you use to get CM7. Just install the app on the phone, and press install 2nd init.
When it reboots, press the volume key when the LED flashes blue for a couple of seconds.
It is attached.
Okay, now find your chosen rom (plenty on here)
Download it, and put it on your sd card, then install using 2nd init.
Don't forget to follow all instructions!
Click to expand...
Click to collapse
i have thanked u bro haha great help thanks very much
i really could kiss u haha but i choose not to lol

[Q] Stock camera not working [LG Optimus Me P350]

Let me give you a little background.
Few days back, I rooted my phone. Then I used Titanium Backup to uninstall apps which I thought were not useful like LG TV, Email- should not have done that
Then the phone was somehow did not boot. I looked up internet and tried something- got worse: Emergency mode with yellow screen. Went ahead to a local phone repair shop and he exploited me well to hand me back the phone in working condition
NOW... the problem is camera does not work. It shows a black screen everytime I launch it. Going in Settings->Applications->Manage Applications->All , Camera shows 0 bytes !
Searching on internet I found that I should not have uninstalled the Email app.
Please share some ideas on how I can help myself here. Any help will be appreciated.
PS- I am using Ubuntu on my computer and Froyo.

Holy hell! I had the same problem a long time ago! (Except no uninstalling was involved) It forced my dad to buy me a new phone.
Sent from my GT-P3100 using xda app-developers app

wish I could dump mine too...
So far there has been no solutions
Sent from my LG-P350 using xda app-developers app

Try installing a custom rom, like cyanogenmod

There are multiple ROMs for the LGOME and they have been behaving as any other ROM for any other phone.
Sent from my DROID2 using xda premium

@op
download custom recovery then
boot you phone into fastboot by pressing vol up + call + power button then use
fastboot flash recovery /path/to/recovery.img
then
fasboot reboot
then download any custom rom that you want and flash that
it will solve your problem
ps: do a google search for more info on fastboot use

PecanCM said:
@op
download custom recovery then
boot you phone into fastboot by pressing vol up + call + power button then use
fastboot flash recovery /path/to/recovery.img
then
fasboot reboot
then download any custom rom that you want and flash that
it will solve your problem
ps: do a google search for more info on fastboot use
Click to expand...
Click to collapse
or if you cba to do that, look in my signature. does it all for you

antdking said:
or if you cba to do that, look in my signature. does it all for you
Click to expand...
Click to collapse
ohh i yeah i forgot your toolkit by some funny things

Cleaned thread.
OP, I would advise, as you ask questions like the one you posted, verify the information posted before you attempt anything. If someone says that if you install a custom ROM on your device, it'll brick; go to the DEV threads, and check out other peoples experiences. You should also spend a ton of time researching before you start messing with your device. MOST of the big trouble people get into is not reading and asking enough questions. If you want to root, find out how to do it, AND how to fix it if it breaks, before you flash a custom ROM, find out how to do it AND how to get back to stock if you need to. The more you learn, the less the chances are that you'll end up in trouble
Just my 2¢

kangi26 said:
Cleaned thread.
OP, I would advise, as you ask questions like the one you posted, verify the information posted before you attempt anything. If someone says that if you install a custom ROM on your device, it'll brick; go to the DEV threads, and check out other peoples experiences. You should also spend a ton of time researching before you start messing with your device. MOST of the big trouble people get into is not reading and asking enough questions. If you want to root, find out how to do it, AND how to fix it if it breaks, before you flash a custom ROM, find out how to do it AND how to get back to stock if you need to. The more you learn, the less the chances are that you'll end up in trouble
Just my 2¢
Click to expand...
Click to collapse
I think I did that mistake earlier. Read something about rooting and went straight ahead to brick the phone. I am hoping to have a clearer understanding of things this time. Since I am newbie, it will take effort. But this forum has so many experts and people are willing to contribute- I am sure I will learn a lot in the company of you guys.
I will dive in the DEV threads as you adviced. Thank you so much guys You are all my Santa Claus

Probable solution for the my camera problem?
kangi26 said:
Cleaned thread.
OP, I would advise, as you ask questions like the one you posted, verify the information posted before you attempt anything. If someone says that if you install a custom ROM on your device, it'll brick; go to the DEV threads, and check out other peoples experiences. You should also spend a ton of time researching before you start messing with your device. MOST of the big trouble people get into is not reading and asking enough questions. If you want to root, find out how to do it, AND how to fix it if it breaks, before you flash a custom ROM, find out how to do it AND how to get back to stock if you need to. The more you learn, the less the chances are that you'll end up in trouble
Just my 2¢
Click to expand...
Click to collapse
If I use this thread, would it fix my camera ? I am not sure HOW should I install though, but of all the things I have read around here, it seems this might help. Please give your views whether I should go with this
If yes, could you please point me some link with detailed instructions ( the post assumes I know the HOW part ) ?

If you are using Froyo, give a try on it. Follow carefully the steps to how flash a ROM. If you already has an recovery, life is easier. If not, search on net about it =D

Any guides for Ubuntu 12.10
DarkRising said:
If you are using Froyo, give a try on it. Follow carefully the steps to how flash a ROM. If you already has an recovery, life is easier. If not, search on net about it =D
Click to expand...
Click to collapse
Awesome ! The problem is I do not have access to any windows system and all the guides that are floating around seem to be for that OS. If you happen to know a guide for Ubuntu, kindly share it with me please...

tatsat said:
Awesome ! The problem is I do not have access to any windows system and all the guides that are floating around seem to be for that OS. If you happen to know a guide for Ubuntu, kindly share it with me please...
Click to expand...
Click to collapse
did you installed recovery ? if not then use ubuntu version of antdking's toolkit or use fastboot

Tat, read my pm
Sent from my GT-P3100 using xda app-developers app

No recovery
PecanCM said:
did you installed recovery ? if not then use ubuntu version of antdking's toolkit or use fastboot
Click to expand...
Click to collapse
To be honest, I was confused with people talking about Clockwork and Nandroid- and I was stupid enough to try not finding out So, No. There is no recovery but on the bright side, I will do that as the first thing from next time onwards

Universal ROOT in 3 steps - Level: Asian

While searching for a method to root the JB build for the yarvik tablet of my family (usual methods have not been successful), i stumbled upon the following Windows based method that now i want to share and should work with a lot more devices:
On your PC:
1. Install USB/ADB drivers from your manufacturer's website
2. Install & connect via http://www.moborobo.com Management Tools, loads own device specific ADB-drivers
3. Download & install this Chinese piece of software from http://www.shuame.com/en/root/
Further steps obsolete, because they're offering an english Root-Tool now.
But for the sake of completion, they will remain here:
In case you don't understand what you do:
- On Website press blue download-button with arrow pointing downwards
- During Installation uncheck every checkbox except the one that grays out the next-button upon unchecking
the download has been a bit slow for me (10kb/sec), if it fails or the take it offline: drop a comment, perhaps i can share the setup file somehow
4. On your device: turn on USB-debugging
On your PC:
5. Run Moborobo Software, then plug your device to USB-Port, wait until Moborobo has recognized it (in my case i had to click some dialogues...)
6. Run freshly installed software from Shuame.com (titled Ë¢»ú¾«Áé in my start menu)
7. When shuame-Logo appears on your device's screen, head on the windows-software towards the 4th icon in the top row; on the appearing screen click on the 4th icon in the 2nd icon-row (the android with some chinese signs + ROOT as title)
on your device:
8. download SuperUser (or superSU) from Market or install via other sources (if not already done)
9. replace asian root / su files (recognized as older versions) with newer ones by SuperUser or superSU
10. delete 2 chinese shuame-APKs from /system/apps directory or uninstall via Titanium Backup
11. => you're done.
if more than 10 People complain they can't find the right button's to click
then i'm willing to post a few screenshots...
else: have fun!
Click to expand...
Click to collapse
oh, and if this worked for you: drop a comment and let the others know!
PS: props go out to the yarvik forum where i found this: http://forum.yarvik.com/showthread.php?4243-root-after-upgrade-to-4-1-1&p=12972&viewfull=1#post12972

reserved for screenshots & reports of success
[nt]

what do you think? possible for the optimus g (japanese version)

screenshots please

i have just rooted my hp slate 7 with this tool......i ran this then ran unlockroot tool i am now fully rooted....
well played my friend good find....now all i need is a nice shiny new rom to go with it lol....

beyored said:
i have just rooted my hp slate 7 with this tool......i ran this then ran unlockroot tool i am now fully rooted....
well played my friend good find....now all i need is a nice shiny new rom to go with it lol....
Click to expand...
Click to collapse
hy, i just bought a slate 7 too, but i can't find the usb drivers.. can you point them to me?? thanks

drifter94 said:
hy, i just bought a slate 7 too, but i can't find the usb drivers.. can you point them to me?? thanks
Click to expand...
Click to collapse
this is what i used they should work for you too my friend.....http://adbdriver.com/downloads/
i dont suppose you know of any cwm recovery for this device... iv searched everywhere......
iv managed to root and deodex the stock rom but gettin board now lol....just hope someone decides to develop for this tab.....fingers crossed....

beyored said:
this is what i used they should work for you too my friend.....http://adbdriver.com/downloads/
i don't suppose you know of any cwm recovery for this device... iv searched everywhere......
iv managed to root and deodex the stock rom but gettin board now lol....just hope someone decides to develop for this tab.....fingers crossed....
Click to expand...
Click to collapse
Thank you sir, gonna try this later.
No, i didn't see any custom recovery for this tablet, I think that it's because it's pretty new. But until now i love it. The only thing i saw was a "blank" forum thread on another forum which i can't recall right now, but i think you already saw that, if not i'm gonna link it to you.
(sorry for the OT )
Sent from my HP Slate 7 using xda app-developers app

drifter94 said:
Thank you sir, gonna try this late.
No, i didn't see any custom recovery for this tablet, I think that it's because it's pretty new. But until now i love it. The only thing i saw was a "blank" forum thread on another forum which i can't recall right now, but i think you already saw that, if not i'm gonna link it to you.
(sorry for the OT )
Sent from my HP Slate 7 using xda app-developers app
Click to expand...
Click to collapse
Sent from my HP Slate 7 using xda premium
Yeah I've seen the thread....and your welcome mate.... I'll let you know if I come across any ROMs......or Recovery's...

Hi,
root is working on my POV MOBII 1325 13.3" !!
BUT........
it's hard without screenshot about deleting chinese apk and replace kinguser_su with superSU...
(9. replace asian root / su files (recognized as older versions) with newer ones by SuperUser or superSU
10. delete 2 chinese shuame-APKs from /system/apps directory or uninstall via Titanium Backup)
please...... screenshots are welcome because I tried to do that but then I lose root !!
regards
alansan2013

deleted

It really works!
It does work on my Xperia miro :good:

I can't download Shaume.
I get 404 Not Found error.

Hamisxa said:
I can't download Shaume.
I get 404 Not Found error.
Click to expand...
Click to collapse
check your pm...

help
beyored said:
check your pm...
Click to expand...
Click to collapse
why cant i download it plz help me to root my hp slate 7

beyored said:
Sent from my HP Slate 7 using xda premium
Yeah I've seen the thread....and your welcome mate.... I'll let you know if I come across any ROMs......or Recovery's...
Click to expand...
Click to collapse
I can't install adb on any computer for the life of me!! Can you please make a flashable zip to root this table? Or something that doesn't require adb.. Thanks
Sent from my HP Slate 7 using xda app-developers app

help
beyored said:
i have just rooted my hp slate 7 with this tool......i ran this then ran unlockroot tool i am now fully rooted....
well played my friend good find....now all i need is a nice shiny new rom to go with it lol....
Click to expand...
Click to collapse
can u help me on this methoed

Hello,
Bit of feedback on your guide. Could benefit other Slate users
First I tried only using my adb drivers and skipped Moborobo, but I got a blank screen with what looks to be half of the right side of the notification bar is darker. So I rebooted and all was well.
I used Moborobo and it found my device and I used Shuame and it looked to be going well until I reached the point of encryption. So the software says press the right so I do and then it rebooted. There was no root and on screen it is asking me to press the blue button again as the green bar was only half so I did. This then put me on a boot loop. I booted into recovery and rebooted to system. It worked. So the screen was still spinning trying to do something and then out of no where it rebooted and same again with the darker area. So I unplugged and rebooted and it worked. I got root.
Now just for the tricky part of removing these Chinese files lol.
Good guide mate. Thank you very much.

SwannyBhoy said:
Hello,
Bit of feedback on your guide. Could benefit other Slate users
First I tried only using my adb drivers and skipped Moborobo, but I got a blank screen with what looks to be half of the right side of the notification bar is darker. So I rebooted and all was well.
I used Moborobo and it found my device and I used Shuame and it looked to be going well until I reached the point of encryption. So the software says press the right so I do and then it rebooted. There was no root and on screen it is asking me to press the blue button again as the green bar was only half so I did. This then put me on a boot loop. I booted into recovery and rebooted to system. It worked. So the screen was still spinning trying to do something and then out of no where it rebooted and same again with the darker area. So I unplugged and rebooted and it worked. I got root.
Now just for the tricky part of removing these Chinese files lol.
Good guide mate. Thank you very much.
Click to expand...
Click to collapse
Well that's a problem for me, if i get that ..( i got black screen twice, I thanked god it wasn't bricked, and decided to not try it again... Lucky third? Either bricked or rooted, not going to give it a go ) )
Sent from my HP Slate 7 using xda app-developers app

If you follow what I did mate you will get root. Its scary but I got it in the end. Its safe to use.. as long as you get in recovery you can save your device.
I have the problem of adding in English SuperUser. When I do and install binary I loose root.
Could someone detail how to do this correctly please? I will still be searching and trying.
Sent from my GT-N7105 using xda premium

[Q&A] ThunderRom800 - Galaxy Tab S 10.5

Q&A for ThunderRom800 - Galaxy Tab S 10.5
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Sixaxis controller
Hi All
I have been running trunderROM 800 v2 for a while now and I am very happy with it thanks to shaheer and everyone involved for taking the time to make this amazing rom.
I'm having trouble with the sixaxis controller app.
It will connect to the tablet if I run the app with in the first 30 seconds of rebooting but then it will drop out after period of time sometimes hours sometimes just minutes.
The rest of the time it will just hang on listening for controller.
It seems that a something is cutting the connection when it runs in the background and stops the connection being made once it is running. If I connect it within the first 30 seconds everything works for a time, then the red light turns off on the ps3 controller but the app still says that it's connected.
I was wondering if anyone else was having similar issue with this rom and app?
I'm not sure if this is a rom issue or not but it seems to me that it might be as it does work to a point and then stops.
I would be grateful for any help or ideas on how to fix this.
Many thanks Richie

Fix
steelsabre said:
Guys this one was an easy fix... all you have tto do is force close quick connect.
Bam it works.
Samsung quick connect. Force close and disble then you'll be able to connect your controller.
Click to expand...
Click to collapse
All sorted found a quick fit thanks to steelsabre. I can fly my AR Drone again
But quick connect keeps running after I force close and dropping the ps3 controller. Is there anyway to stop it for good or would I have to uninstall it?
thanks again

SaintRichie said:
All sorted found a quick fit thanks to steelsabre. I can fly my AR Drone again
But quick connect keeps running after I force close and dropping the ps3 controller. Is there anyway to stop it for good or would I have to uninstall it?
thanks again
Click to expand...
Click to collapse
Just uninstall using this: https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en
I got it removed on mine.

I was wondering if there was a way to get rid of the sd card notification that pops up on every boot. I thought i saw a tutorial somewhere in another thread but ive searched and searched and still cant find anything

Soooo... sorry in advance, but I am a total newb when it comes to android. I just got the tab s yesterday and have never had an android before. I'm excited to get into rooting and I really want to get rid of all this bloatware but before I go off and try something way over my head I was wondering if anyone could help me get this ROM installed. I already rooted following this guide.
HTML:
http://forum.xda-developers.com/galaxy-tab-s/development/root-cf-autoroot-t800-t2802916
Now that I've done that, can anyone please help with what I need to do next? I have this guide I found but I don't even know what TWRP or aroma installer is xD
HTML:
http://forum.xda-developers.com/showpost.php?p=54660758&postcount=26
I could really use an idiots guide for this lol. Thank you

l8ishop said:
Soooo... sorry in advance, but I am a total newb when it comes to android. I just got the tab s yesterday and have never had an android before. I'm excited to get into rooting and I really want to get rid of all this bloatware but before I go off and try something way over my head I was wondering if anyone could help me get this ROM installed. I already rooted following this guide.
HTML:
http://forum.xda-developers.com/galaxy-tab-s/development/root-cf-autoroot-t800-t2802916
Now that I've done that, can anyone please help with what I need to do next? I have this guide I found but I don't even know what TWRP or aroma installer is xD
HTML:
http://forum.xda-developers.com/showpost.php?p=54660758&postcount=26
I could really use an idiots guide for this lol. Thank you
Click to expand...
Click to collapse
No worries man I was a noob to android back in july. Twrp is a custom recovery when you press the home+power+vol up at the same time while the tab is booting. Aroma installer is an installer inside the rom in which you can pick the apps,launcher and few few other settings while installing the rom. It makes the debloated process easyer. To install twrp you must be rooted and search in the play store twrp. Once its downloaded open it and hit install. You have to pick the exact model you have. May I ask what model is your tab s and size? Once you pick your model you will have to hit the install and it well make you download the file needed for the recovery. It then should say its installed and you will have to reboot into recovery. Twrp recovery is a touch recovery in which you can can install roms. To install roms (thunderrom/rom in a zip) You will have to backup everything. You have to hit the backup tab and check/tick every box in which md5 check, compression, data boxes are optional depending on how much memory you have. Now you just have to slide the slider and it will backup everything. It may take a while and you should have your battery charged while doing this. After your backup is done, now is the installing of the rom. You have to clear dalvik and cache before installing it. To do so I forget which tab its in but it should be in advanced. After clearing those you now hit the install tab. Now you have to select the rom you downloaded and it should be in the downloads folder. When its selected slide the slider and it will install it and take you to amora installer. Just pick the things you want and then it will install it and take you back to twrp. Now just hit the reboot tab and tap system. Then the tab s will reboot and have a custom rom. There are also some helpful videos on youtube to help you and if i forget something. Hope this helps! My fingers hurt lol.

I have a question: I understand I need to do a complete back up before flashing any Rom, but to do that don't I need to install a custom recovery. So does that mean I won't be able to put the stock **recovery** back if I need to?

barth2 said:
I have a question: I understand I need to do a complete back up before flashing any Rom, but to do that don't I need to install a custom recovery. So does that mean I won't be able to put the stock **recovery** back if I need to?
Click to expand...
Click to collapse
To install that backup you will need the custom recovery. You can get back to stock by flashing the stock recovery img. I dont know exactly how to put back on the stock one but custom recovery is mostly needed to install your backups in case something goes wrong.

DUHAsianSKILLZ said:
No worries man I was a noob to android back in july. Twrp is a custom recovery when you press the home+power+vol up at the same time while the tab is booting. Aroma installer is an installer inside the rom in which you can pick the apps,launcher and few few other settings while installing the rom. It makes the debloated process easyer. To install twrp you must be rooted and search in the play store twrp. Once its downloaded open it and hit install. You have to pick the exact model you have. May I ask what model is your tab s and size? Once you pick your model you will have to hit the install and it well make you download the file needed for the recovery. It then should say its installed and you will have to reboot into recovery. Twrp recovery is a touch recovery in which you can can install roms. To install roms (thunderrom/rom in a zip) You will have to backup everything. You have to hit the backup tab and check/tick every box in which md5 check, compression, data boxes are optional depending on how much memory you have. Now you just have to slide the slider and it will backup everything. It may take a while and you should have your battery charged while doing this. After your backup is done, now is the installing of the rom. You have to clear dalvik and cache before installing it. To do so I forget which tab its in but it should be in advanced. After clearing those you now hit the install tab. Now you have to select the rom you downloaded and it should be in the downloads folder. When its selected slide the slider and it will install it and take you to amora installer. Just pick the things you want and then it will install it and take you back to twrp. Now just hit the reboot tab and tap system. Then the tab s will reboot and have a custom rom. There are also some helpful videos on youtube to help you and if i forget something. Hope this helps! My fingers hurt lol.
Click to expand...
Click to collapse
Ok so at what point do I need the thunderrom? And is it preferred to have that on an SD card vs internal memory?

sd card
Can apps write the sd card with this rom?

LTE
i will wait for LTE version....pls..

hey
Can it be installed on t805?

please
Port this rom to t805 and i will be very grateful

How is quad multitasking and 4 way reboot enabled? Can't seem to get them to work....

Yo_MaMa said:
How is quad multitasking and 4 way reboot enabled? Can't seem to get them to work....
Click to expand...
Click to collapse
Quad should work by default? I think 4 way reboot should also. How did you flash this?

DUHAsianSKILLZ said:
Quad should work by default? I think 4 way reboot should also. How did you flash this?
Click to expand...
Click to collapse
Via twrp. Wiped cache, dalvkit, system then flashed, waited 10 min, rebooted and finished first setup. Reflashed on top about 30 minutes ago just to see if it missed some files on the install, but it's still the same.

e: footer is wrong
it keeps saying that
e: footer is wrong
e: signature verification failed
please help

volume
I love this custom rom but why doesn't the volume on my galaxy tab s work anymore. you can't control it

Google Account Manger crashing on setup
Hey folks!
Flashed this rom (both 2.0 and the beta) and I get the same problem when going through the setup of the tablet. When I get to the screen 'some apps are personalized to the user' or something, I need to enter a name, when I do so I click next and I get the error message 'Unfortunately, Google Account Manager has closed unexpectedly' (my wording might be off, but I assume you guys know what I am talking about).
Would really like to try out this rom, but can't seem to figure out how to fix this issue.
FIXED:
When I put in anything into the name fields, the app crashed. Leaving them blank allows the process to continue.