Develop Bugs

UNIVERSAL : need a Coaxial Cable Pre-assy replacement

Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.

Hey,
If you find it let me know, I need one two. Actually these are two cables the Coaxial (Display) and Coaxial (Functional). My screen goes white in landscape mode and I confirmed it's the cable by disassembling my machine. However was unable to find that cable Will let you know if I find it.

Me too.
I am getting odd touch screen errors and think it can only be the cable.
If anyone knows of a supplier, please post here.
Has anyone tried contacting HTC directly?

I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful

villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Thanks,
Please do let me know, I really need that cable.
MOBILER

Finally ... got cables !
Here mate ... take this adress
http://qinyieproduct.diytrade.com/sdp/444314/4/pd-2468984/2411741-0.html
villard said:
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Click to expand...
Click to collapse

found coaxial cable for £60 plus vat.
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Give this site a look, http://www.apexlaptops.co.uk/Universal.htm
I have been having the same problems as you guys. my uni have been getting "white screen of death" for about 6 months now.
I am going to take out the cable and try and fix it myself. (fingers crossed)
I will let you all know how it goes. I felt £60 plus vat and postage was a bit steep.

coax cable
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.

Hi,
Congratulations!
What tools did you use for this job(srews, tweezers)?
gingerchristopher said:
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Click to expand...
Click to collapse

re: fixed it
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.

ang how about antistatic gloves?
gingerchristopher said:
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
Click to expand...
Click to collapse

Anti Static gloves!!
Because of the Job I do, I have an earthing band to connect the phone and me to the wall, and put the phone on an anti static table cover. All is good so far. I am looking at Feb to solder (as i have some leave in). There will be detailed photos and description.
Untill then........

Just found a coax on e-bay
Hi I hope anyone who is after this coax cable can read this before the weekend is out, as there is one on e-bay for £40 this is the link.
http://cgi.ebay.co.uk/NEW-O2-XDA-EX...9QQihZ020QQcategoryZ41343QQrdZ1QQcmdZViewItem
Chris.

Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??

hbahaie said:
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
Click to expand...
Click to collapse
nope. open up and check the contacts

omega_ said:
nope. open up and check the contacts
Click to expand...
Click to collapse
Thank you very much for your advice, I'll check. Thanks

hbahaie said:
Thank you very much for your advice, I'll check. Thanks
Click to expand...
Click to collapse
I have disassembled my uni and checked for all connections, but there was no improvement. I can confirm that the disappearance of external speakers sound is not due to co-axial cable. The proof is that i extracted my main borad from my uni and implanted it in another one, i assumed that the problem will be rsolved, but the same problem still exists. Ok, now i can disassemble my uni for smallest piece, but any one advise me where is th connection part or the piece that causes that problem. Again a brief description of the problem:
when there is a coming call, i cannot here the ring or it is sevrely intermitent, also when i play any WMP file, i cannot here the sound, if I press firmly on the base or around the keyboard the sound comes again and may last for a few minutes or disappear after another press. So, there is a lose part in the main board i think that needs fixation, but which one????

Hi all
Now it takes me more than a month to upgrade my JASJAR due to a lot of problems I faced during this upgrading adventure… anyway, the last problem I still have is that after upgrading the screen goes crazy, I mean if you press on the screen the colours are mixed for few seconds and then its ok but at any time I touch the screen again the same happened so you can imagine what if I am going to dial a number or write a message …. So can anyone advice me what to do? …
The rom version is 1.13.82
Radio 1.04.02
Extrom 1.13.188
And I think the bootloader 1.00 and I don’t know why I feel that the bootloader is the reason ... I made a deep search but I couldn’t find problem like mine

gingerchristopher said:
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
Click to expand...
Click to collapse
Sitting next to my M5000 and all of a sudden the screen turned on but was white!
Following your lead I found that the first i.e. 'underneath' connector was not fully home. A little push and all is well.
Took the time to pack out the housing for the stylus to stop the little blighter escaping whilst in there.
Thank you for taking the time to post gingerchristopher.
Pete

!!! Help! Touch Pro2 ....USB socket....

The touch pro 2 USB socket broke... (the 11 pin one)
and it is out of warranty.
They are demanding $300 to get it fixed.
Does anyone know of some other way I can get this phone fixed at a much cheaper price?!? Please!!

How exactly did it break? Did the whole socket come unsoldered or did the little tab thing just break off? The tab broke off on my old Mogul & I just superglued it back in. VERY carefully. It worked just fine afterward, the tab is just there to support the pins.
If the whole socket broke off, all I could suggest is finding a friend who's really good at taking stuff apart & soldering. I would do it(used to do micro-soldering for Hitachi) but I live in OK.

$300.00...?!?! That's insane...when the same happened to my mda, I purchased a battery charger from cellphoneshop.net, that charged the battery without the phone...I searched their site and was unable to locate one for the tp2
I don't know how big bellevue, wa is, or if its close to a larger metropolitan area. If so, I would look on craigslist and search for "cell phone repair". I had my mda screen repaired by a company I found on there, pretty cheap....

Alright, thanks guys... but is there like a place where I can mail-it in to get the phone repaired? Craigslist isn't really helping. The phone charges, but I can't connect it to the computer via USB or use any headphones. Also, there are other MAJOR problems caused by this broken socket (it won't boot unless I have a USB adapter plugged in, and that it remains in headphones mode). The black clip came off, but it's kinda impossible to glue it back in.

http://cnn.cn/shop/t7373-touch-pro2-rhodium-c-277_815.html
it isnt here right now but try calling them and see if you can get a new port, if the port isnt soldered to the board.

Replacing usb connection of phone

Ever since my small accident. I feel like my usb charging port on my phone is not working right. My brother-in-law bent it back and seemed to work for a while but now I have to hold my mouth right to charge it. How hard is it to replace?? At one point I read on ifixit how to and had found on ebay the part but that was a while back ago.

My gnex took a swim, causing the USB port to no longer function. I was surprised by how easy the procedure was. I followed youtube video watch?v=B5fZzZANLC4, and found it very helpful. I work on computers, so I was somewhat familiar, everything was just on a smaller scale. The hardest part was reconnecting the antenna cable to the main board. I found a magnifying glass to be quite useful. Just be careful, make sure you get the right item for your model and follow the video and you'll be fine. I got my replacement flex cable on ebay, it was inexpensive.
p.s. sorry I couldn't post the whole youtube url, I don't have enough posts for such features

Replacing the charging port

Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
http://www.witrigs.com/media/catalo...a71cb48e3d52cb890e76f9e6353/1/0/109063-01.jpg
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.

bookfast said:
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
http://www.witrigs.com/media/catalo...a71cb48e3d52cb890e76f9e6353/1/0/109063-01.jpg
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
Click to expand...
Click to collapse
Hey there. Interesting to know that you replaced it all your self . Did you put everything back perfectly ? I mean the display being aligned properly to the body, the speaker grills being flushed with the body; ? Weird to ask, but did you damage anything while doing it all yourself ? Like the screen scratches, or something else ? Sorry, for asking these... Thanks in advance :good:

Tej XFire said:
Hey there. Interesting to know that you replaced it all your self . Did you put everything back perfectly ? I mean the display being aligned properly to the body, the speaker grills being flushed with the body; ? Weird to ask, but did you damage anything while doing it all yourself ? Like the screen scratches, or something else ? Sorry, for asking these... Thanks in advance :good:
Click to expand...
Click to collapse
I haven't re-glued the speaker covers back on yet so I dont know if they will be perfectly flush or not, although they still look flat so I think it will look good.
The only damage is a slight bend in the frame on the screen side of the sim tray slot. The metal is thin, and I pried against it to get the hardware out of the frame. That is why I recommended to start from the bottom when separating the two. Doing this should allow others to avoid this problem. It is slight, maybe 1/4mm gap where it used to be flush along the side of the screen above the sim tray.
Otherwise everything was smooth. The screen/frame etc are still mint.

bookfast said:
I haven't re-glued the speaker covers back on yet so I dont know if they will be perfectly flush or not, although they still look flat so I think it will look good.
The only damage is a slight bend in the frame on the screen side of the sim tray slot. The metal is thin, and I pried against it to get the hardware out of the frame. That is why I recommended to start from the bottom when separating the two. Doing this should allow others to avoid this problem. It is slight, maybe 1/4mm gap where it used to be flush along the side of the screen above the sim tray.
Otherwise everything was smooth. The screen/frame etc are still mint.
Click to expand...
Click to collapse
Cool, you've done it like a pro then. :good: .Any picture describing the damage would be helpful, if you can provide. Is the display mint ? No scuffs/scratches on it ? But, my speaker grills were damaged onto the edges after the repair was carried out. Does yours show the same sign ? I don't mean the flatness of the grills, but the damage that should be done, while prying out the grills. A picture showing your damage would be helpful to me. I could do the same, if you insist. Thanks ! :good:

Mine is busted. But I cannot find the PCB. The link in the op is dead.
Any ideas?

http://www.witrigs.com/oem-charging-port-flex-for-htc-one-m8

bookfast said:
http://www.witrigs.com/oem-charging-port-flex-for-htc-one-m8
Click to expand...
Click to collapse
I actually got one off eBay for $17.21. Works perfectly.

Just wondering....
Sounds like you were able to avoid some steps in the teardown guide, if I recall it was damn near a total disassemble. Do you have a lot of experience with phones? I want to fix mine, but don't need a tedious project right now. If I repair mine I'd like to put a mini USB in place of the micro if possible, I've seen too many damaged micro usb to trust or like them. As for the speaker grills, if you're picky buy replacements, they're cheap.

microphone on charging port?
bookfast said:
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
link
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
Click to expand...
Click to collapse
My HTC M8's main call microphone has stopped working, and through searches on Google it seems that perhaps that this mic (first mic, non-speakerphone mic) is built into the charging port. Is this the case? I cannot find anything that explicitly says this, and I'd love to get the phone back in working condition.

dm8233 said:
My HTC M8's main call microphone has stopped working, and through searches on Google it seems that perhaps that this mic (first mic, non-speakerphone mic) is built into the charging port. Is this the case? I cannot find anything that explicitly says this, and I'd love to get the phone back in working condition.
Click to expand...
Click to collapse
I too am also curious if the mic is on the usb part because my mic doesnt wrk when i make calls.
Will replacing the usb port fix the problem?

Harvey02 said:
I too am also curious if the mic is on the usb part because my mic doesnt wrk when i make calls.
Will replacing the usb port fix the problem?
Click to expand...
Click to collapse
I called HTC, the mic is on the USB port, although you should make sure that it's not a software issue first. There are several threads on the internet easily found through Google which discuss doing a factory reset to resolve this if it turns out to be a software problem.

Thanks for your reply. I did a factory reset when I got the phone but it still doesn't work. Does that mean it's not a software problem and that if I replace the usb it should work?

Harvey02 said:
Thanks for your reply. I did a factory reset when I got the phone but it still doesn't work. Does that mean it's not a software problem and that if I replace the usb it should work?
Click to expand...
Click to collapse
I would think so, yes.

Thanks! Do you know of any online source confirming that?

Harvey02 said:
Thanks! Do you know of any online source confirming that?
Click to expand...
Click to collapse
No, but from what I've studied about it, it should work. Feel free to contact HTC, they actually have a live chat available somewhere on their website. Good luck to you.

Very interesting, I contacted htc and we went through diagnostics together and the rep said that I have to send it in. I asked him if the mic was on the usb assembly and he said that it wasn't and rather it was on the motherboard, and I clarified that we were talking about the primary mic which is located near the usb port. Confusing bec everywhere I saw online said that the mic is on the usb assembly. Go figure!

Harvey02 said:
Very interesting, I contacted htc and we went through diagnostics together and the rep said that I have to send it in. I asked him if the mic was on the usb assembly and he said that it wasn't and rather it was on the motherboard, and I clarified that we were talking about the primary mic which is located near the usb port. Confusing bec everywhere I saw online said that the mic is on the usb assembly. Go figure!
Click to expand...
Click to collapse
What did you end up doing? Did you discover if it was on the motherboard or the part with the USB port? I've waited a while to repair mine for other reasons, and I am now prepared to fix it. Any information would be helpful.

Just a few notes on my own experience.
I replaced the screen in my friend's M8 a few months ago. Seemed like everything went ok, except after I got done, the mic didn't work anymore. This is strange because it worked fine before, and all I did was remove/replace the circuit board in the process (yes, the small one at the bottom with the uUSB port). However, the upper rear microphone was still working I believe, because people on the other end of the line could still hear if the phone was put into speakerphone mode. I don't know why it would stop working all of a sudden.... Ran the HTC audio test using *#*#3424*#* to confirm main mic wasn't working and that the aux rear mic was.
Fast forward to this week, with my own M8. The uUSB connector was going bad, and I was having trouble charging, so I figured it was time to replace that circuit board. Ordered a new one and replaced, but when I got it back together, the USB port was fine of course, but my mic wasn't working now, just like my friends! On top of that, the headphone jack didn't work at all. Most likely the "cable inserted" signal wasn't getting back up to the motherboard, but didn't check. So pissed off. Also, the new board I got didn't have the bottom left RF connector/circuitry populated. Thinking from research that it might be for the GPS? I should have tested when the board was in there, but didn't. Fixed a bad solder joint on the original board's uUSB connector, which helped, but still charging is a bit messed up. I'd rather have a working mic and headphone jack and have to play with the cable to get to charge for a while until I get another board (from another supplier, jerks).
Yes, the mic is the small chip on the very left side of the board. It has a hole underneath the chip, going through the board and to the front face to receive the acoustics.
I don't know why the mic not working is so common after an HTC One M8 tear down, as it seems many others are having the same issue. One theory I have is that pulling the circuit board from the motherboard while power is still applied (not unplugging the battery first) might be jacking the microphone somehow. Just a theory, but I'd recommend to be safe that anyone replacing the board should unplug the battery cable before replacing the USB/mic circuit board.

I'd just like to chime in to say that I've read about some people having problems with the mic not working after replacing the USB board. From what I understand, there are two different versions of it, and replacing it with the wrong one can cause that very issue. You should look into it.
EDIT: Source - http://www.witrigs.com/blog/htc-one-m8-audio-jack-not-work-after-charging-board-replacement/

Mic broken after USB repair
Old thread but I have the same problem. Replaced USB board and now my mic does not work. However I am pretty certain I did order the correct board (had 2x connectors for my Verizon HTC m8). And my microphone jack work great which others indicate is often broken along with the mic. Anyone have any workarounds?

Changing the charge port on SM-T800 is relatively easy....

... if you don't do something stupid like I did. If you pay attention, research, watch videos, etc, you won't do what I did. I found a charging port on amazon that came with the tools needed to get the job done for about $15. I opened the case and all went well up to the point that I needed to disconnect the old piece. I followed all directions up to disconnecting the wide connection. There are 2. One right next to the port and the other at the opposite end of the ribbon cable. Not paying a bit of attention to what I was doing, instead of popping up the little latch that holds the cable down, I pried up the ribbon cable. Thus breaking off the connector that is soldered to the board. Now, I have a tablet that works until the battery dies.
Moral to the story, pay attention. Replacing the port is easy. Just pay attention.
Now, does anyone know if the connector can be replaced? Can I get a new board? Or am I out $400+?!

Follow-up question. I am looking around and it looks like I can get a replacement motherboard. Before I spend the money on a new motherboard (and hopefully not break this one), how will it function? I am rooted. Will I be starting from scratch with a stock tablet? No OS at all? Just fine and still rooted?
Thanks.

Bdozier said:
Follow-up question. I am looking around and it looks like I can get a replacement motherboard. Before I spend the money on a new motherboard (and hopefully not break this one), how will it function? I am rooted. Will I be starting from scratch with a stock tablet? No OS at all? Just fine and still rooted?
Thanks.
Click to expand...
Click to collapse
Did you ever find a solution? I just did the same thing. I was trying to be careful - but that top piece just broke right off of the connector to the motherboard. Am I screwed?!

arl16 said:
Did you ever find a solution? I just did the same thing. I was trying to be careful - but that top piece just broke right off of the connector to the motherboard. Am I screwed?!
Click to expand...
Click to collapse
What piece broke off? You might be in luck cause i have 3 tab s's taken apart right now and can probably send you the part you need. Can you pm a picture of the part you broke? The charging port is connected to a cable and i just had it apart. What did you break on it?

mikep2323 said:
What piece broke off? You might be in luck cause i have 3 tab s's taken apart right now and can probably send you the part you need. Can you pm a picture of the part you broke? The charging port is connected to a cable and i just had it apart. What did you break on it?
Click to expand...
Click to collapse
Wow - that would be awesome. Truth be told, I'm doubting this is something I'll be able to do myself, but I'm about to have a dead/useless tablet, and nothing to lose. So I'm willing to try!
Thanks!

Here are the broken pieces. In case anyone is thinking about doing this - they're very fragile!
Again, not sure about my ability to take the piece off of the motherboard, and/or attach a replacement.
Anyone ever try it before? I'm hoping I wouldn't have to take the motherboard out and/or solder anything!

arl16 said:
Here are the broken pieces. In case anyone is thinking about doing this - they're very fragile!
Again, not sure about my ability to take the piece off of the motherboard, and/or attach a replacement.
Anyone ever try it before? I'm hoping I wouldn't have to take the motherboard out and/or solder anything!
Click to expand...
Click to collapse
Unfortunately the motherboard i have is broke and it doesnt start up. I thought it was the charging port so i cant help you out. You can buy a new board for 99 dollars though or just buy a used broke one off ebay and switch the board out. It is very easy to do and there are videos on you tube. People have used ones for cheap with broke lcds or screen burn. Buy one of those and switch out the top board cause that is all you need. I have all the other parts but my main board has something wrong with it. If you do that just make sure you get the same model number cause i just bought a verizon one and the motherboard wont work with my att one. I have 2 att ones that i was able to swap out.

arl16 said:
Here are the broken pieces. In case anyone is thinking about doing this - they're very fragile!
Again, not sure about my ability to take the piece off of the motherboard, and/or attach a replacement.
Anyone ever try it before? I'm hoping I wouldn't have to take the motherboard out and/or solder anything!
Click to expand...
Click to collapse
You know i might have got my 1 tablet working and if it is i can send you the board. I will let you know tomorrow.

mikep2323 said:
You know i might have got my 1 tablet working and if it is i can send you the board. I will let you know tomorrow.
Click to expand...
Click to collapse
Awesome - thanks!