Hi there,
lately there have been OTA updates for CID HTC__023 and TELNZ001 which brought a new base (3.17) and some troubles (touch not responding) when using old (3.14) based custom roms.
The OTA brought a hboot update including an update to the touchscreen controller and therefore it only works correctly when using the corresponding 3.17 base kernel.
As slowly various CIDs are getting OTA updates to new base with new touchscreen controller firmware, these devices will have touchscreen issues on 3.14 based roms. But this kernel will help those people out.
adamnz had the initial idea in the thread linked above to try the 3.17 kernel on a 3.14 rom, so I followed up and created a flashable zip with all neccessary modules for those who are stuck with stock HTC ROM atm.
As I am running sense based RD-MIUI, I created a MIUI compatible boot.img, too which incorporates some ramdisk tweaks as init.d-support (busybox run-parts), volume-wake-deep-sleep-fix and run shelld service to prevent MiuiHome FCs.
03.02.2013: Base 3.17.781.2 (CID TELNZ001)
Grab the flashable zip from here: endeavoru_base_3.17.781.2_kernel.zip
Thx to adamnz for providing the OTA file and yumcimil for a full nandroid backup. :highfive:
Base 3.17.728.1 (CID HTC__023)
Grab the flashable zip from here: endeavoru_base_3.17.728.1_kernel.zip
Infos on different boot images
boot.img is the fully untouched 3.17 stock kernel while boot_miui.img has some tweaks as described above.
As the tweaks in boot_miui.img should have no drawbacks when used with non-miui-rom (and users reported that the stock one does not work but the miui one does),
boot_miui.img is the prefered kernel even when not running MIUI (if you do not want to repack).
Repacking
As JB sense roms around use the HTC stock kernel, which ramdisk is quite the same compared to this kernel, you can easily repack this kernel with the one from your favourite ROM. Please use the boot.img for this instead of boot_miui.img and do not forget to flash the zip file with the modules. This way you get all the rom-specific features and tweaks the rom chef included in his ramdisk.
Installation
Make a nandroid before, flash zip from recovery, flash boot.img from within the zip via fastboot, wipe cache and reboot.
Re: [KERNEL][Base 3.17.728.1] HTC JB Stock & MIUI
Thanks for this!
Sent from my One X running Blade v4.6.0. At a mere 240 MB, with tons of AROMA Mods and tweaks, this, is what you want.
Confirmed working with ViperX 3.3.2 using boot_miui.img, on HTC__023.
Touch works
cheers
Working with insert coin 15.1.1 with vid HTC_001!!
fantastic!
Works very well with Blade v4.6.0 (de-sensed) on HTC__023. Battery drain is less than 0.5% per hour in deep sleep.
[KERNEL][Base 3.17.728.1] HTC JB Stock & MIUI
marcosorano said:
Working with insert coin 15.1.1 with vid HTC_001!!
Click to expand...
Click to collapse
Yeah, this kernel works with all CIDs, but there are no real improvements. At least I did not notice any.
But for those with CID 023 and latest OTA update (3.17) this kernel allows them to use 3.14 based roms again. :good:
@all
Thanks for trying this one out and reporting back. Really much appreciated.
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
You would need to unlock your bootloader via htcdev, flash custom recovery and then flash the kernel zip in recovery and the kernel image in bootloader with fastboot.
nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
What CID do you have?
The offical 3.17 base update only rolled out for CID HTC_023 atm. As this update brought something new to the touchscreen controller, this 3.17 kernel is needed to run 3.14 based roms.
If you have a CID different from HTC_023 (OR did not yet installed the official 3.17 OTA), running this kernel will not change anything regarding to your problem. But of course you can try, it will not cause any harm. Just follow the instructions in OP.
EDIT: Just overread the STOCK in your post. Need to grab a cup of coffee.
But gffmac is right: Just need to mention that unlocking the bootloader will wipe your /data-Partition (userdata).
nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
It's unlikely to fix a touchscreen problem that was present on a stock rom especially if you haven't unlocked it previously. You maybe have a hardware problem with it
JohnnyInBriz said:
It's unlikely to fix a touchscreen problem that was present on a stock rom especially if you haven't unlocked it previously. You maybe have a hardware problem with it
Click to expand...
Click to collapse
Absolutely... Did not even think about that...
REALLY need to grab a cup of coffee. Now! :silly:
hi man!
can i use this kernel on my HOX?
ROM:Nocturnal JellySense+ v5.0 (3.14)
CID: HTC_044
thanks for reply
mrberni said:
Yeah, this kernel works with all CIDs, but there are no real improvements. At least I did not notice any.
But for those with CID 023 and latest OTA update (3.17) this kernel allows them to use 3.14 based roms again. :good:
@all
Thanks for trying this one out and reporting back. Really much appreciated.
Click to expand...
Click to collapse
With the stock kerneli ave some touchscreen problem when connected to usb now with your kernel it's solved
omer_hyltz said:
hi man!
can i use this kernel on my HOX?
ROM:Nocturnal JellySense+ v5.0 (3.14)
CID: HTC_044
thanks for reply
Click to expand...
Click to collapse
This kernel should work with every jb sense based rom.
marcosorano said:
With the stock kerneli ave some touchscreen problem when connected to usb now with your kernel it's solved
Click to expand...
Click to collapse
Really glad to hear that it helped you out. :highfive:
can this be worked on h boot unsupported version too or its just for the people who are already updated their h boot ??
Nani2000 said:
can this be worked on h boot unsupported version too or its just for the people who are already updated their h boot ??
Click to expand...
Click to collapse
Of course you need a jb compatible hboot the run this kernel.
Working fine on Venom ViperX JB 3.3.2
CID: H3G__001
HBOOT: 1.39
What's battery life using this on Viper like compared to Skydragon?
Related
Hi Guys,
I have a HTC One X with Optus software and it is already a 1.28 base, so my questions is this:
Do i need to flash the custom boot.img for any of the new 1.28 based custom roms like insert coins or android revolution etc?
My thoughts are if i already have a 1.28 base i can just install the custom rom through cwm.
cheers
stevejau said:
Hi Guys,
I have a HTC One X with Optus software and it is already a 1.28 base, so my questions is this:
Do i need to flash the custom boot.img for any of the new 1.28 based custom roms like insert coins or android revolution etc?
My thoughts are if i already have a 1.28 base i can just install the custom rom through cwm.
cheers
Click to expand...
Click to collapse
You can flash any custom ROM you wish. Just make sure you flash boot.img first and then the custom ROM.
stevejau said:
Hi Guys,
I have a HTC One X with Optus software and it is already a 1.28 base, so my questions is this:
Do i need to flash the custom boot.img for any of the new 1.28 based custom roms like insert coins or android revolution etc?
My thoughts are if i already have a 1.28 base i can just install the custom rom through cwm.
cheers
Click to expand...
Click to collapse
If the ROM dev has made any changes in boot.img then yes, you'll need to flash their version. If they're using a completely stock boot.img then you don't need to bother (although I'm not sure that there's many ROMs where that is the case).
ARHD and IC both definitely need the boot.img flashing.
hopscotchjunkie said:
If the ROM dev has made any changes in boot.img then yes, you'll need to flash their version. If they're using a completely stock boot.img then you don't need to bother (although I'm not sure that there's many ROMs where that is the case).
ARHD and IC both definitely need the boot.img flashing.
Click to expand...
Click to collapse
thanks, just the info i needed.
cheers
HI!
I bought a HOX 5 months ago and i've used several ROMs since then but with the last ROMs I've a problem with GPS, it has no signal! With GPS test i see 0 satelites. I hope that someone have an answere for that :/
now i'm using:
android version 4.1.1
base band 2.1204.135.20
kernel 2.639.4-ncx-g33d04eb-dirty
AOKP version aokp_endeavoru_unofficial_Sep-25-12
I hope that someone have an answere for that :/
If you are s-on make sure you flash the boot.img in the roms's zip using fastboot.
Also you might like to add which rom and kernel you are using incase its a bug that needs fixing.
Vcek said:
If you are s-on make sure you flash the boot.img in the roms's zip using fastboot.
Also you might like to add which rom and kernel you are using incase its a bug that needs fixing.
Click to expand...
Click to collapse
i've modificaed the post
Hi.
I really need help to find a way to downgrade my hboot ! I read a lot for downgrade hboot on Htc evo 3d.
But are there no methods who works to downgrade one x hboot?
i really want so bad to downgrade my hboot back to 1.12, now 1.31 ! Thanks
Unless you have S-OFF it can't be done
No,you cant
In guessing you want to downgrade because you want to run CM10? Or AOKP
Sent from my HTC One X using xda premium
slimldj said:
In guessing you want to downgrade because you want to run CM10? Or AOKP
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Yes, thats my case. I want to go back to CM10 and AOKP roms. There are not many good roms who support the 1.31 hboot yet.
I tryied the PA rom based on cm10, dosnt work with hboot 1.31. The only roms who works are Android revolutions hd, cm10_endeavoru-ota-eng.noeri with working gps, wifi.
i dont want stock sense rom, i want a good custom rom, clean rom.
Is there a way to do this with s-off? Any guides who may work on htc one x?
Super thanks!
groven87 said:
Yes, thats my case. I want to go back to CM10 and AOKP roms. There are not many good roms who support the 1.31 hboot yet.
I tryied the PA rom based on cm10, dosnt work with hboot 1.31. The only roms who works are Android revolutions hd, cm10_endeavoru-ota-eng.noeri with working gps, wifi.
i dont want stock sense rom, i want a good custom rom, clean rom.
Is there a way to do this with s-off? Any guides who may work on htc one x?
Super thanks!
Click to expand...
Click to collapse
you simply can't... no S-OFF no downgrade... S-OFF is not possible for now
Because my phone is f*cked up, maybe I'll try to downgrade to H-BOOT 0.95 soon. And what happened? The screen is not pretty much of the time, sometimes it doesn't work, only softbuttons are light up.
THERE IS A WAY TO INSTALL EVERY AOSP Rom available there
at CyanogenMOD 10 "SE" you will havw link for a kernel to run CM10-SE , you can use this kernel for ever AOSP out there to make it run on your HTC One X , you need to follow these steps
1- Flash any AOSP from from Recovery as usual after wiping for sure
2- Dont reboot and use that provided kernel and flash it also inside recovery
3- Reboot into bootloader FastBoot and flash the boot.img inside there kernel as its called "boot_1.23_1.28_hboot_v1.0 " you can rename it as boot.img for easier installing as that for newer hboots and its compaitable with CM10-SE kernel which at this point compaitable with the kernel you have just flashed
but as it indicated it dosent have a functional GPS
with these steps I have been able to try all AOSP Roms
If you need to get the GPS running you may like to try the same above steps using TripNRaVeR flashable kernel zip
I hope that would help you
HTC Venom said:
THERE IS A WAY TO INSTALL EVERY AOSP Rom available there
at CyanogenMOD 10 "SE" you will havw link for a kernel to run CM10-SE , you can use this kernel for ever AOSP out there to make it run on your HTC One X , you need to follow these steps
1- Flash any AOSP from from Recovery as usual after wiping for sure
2- Dont reboot and use that provided kernel and flash it also inside recovery
3- Reboot into bootloader FastBoot and flash the boot.img inside there kernel as its called "boot_1.23_1.28_hboot_v1.0 " you can rename it as boot.img for easier installing as that for newer hboots and its compaitable with CM10-SE kernel which at this point compaitable with the kernel you have just flashed
but as it indicated it dosent have a functional GPS
with these steps I have been able to try all AOSP Roms
If you need to get the GPS running you may like to try the same above steps using TripNRaVeR flashable kernel zip
I hope that would help you
Click to expand...
Click to collapse
sounds good, but on the one hand you have no working gps and on the other hand you got random reboots with the TripNRaVeR Kernel.
We just need that damn S-Off
YolCuA said:
sounds good, but on the one hand you have no working gps and on the other hand you got random reboots with the TripNRaVeR Kernel.
We just need that damn S-Off
Click to expand...
Click to collapse
probably that will never happen...
matt95 said:
probably that will never happen...
Click to expand...
Click to collapse
Hope dies last
matt95 said:
probably that will never happen...
Click to expand...
Click to collapse
I see more and more posts that make me think .... thank god that i did not upgrade my hboot !!!
YolCuA said:
sounds good, but on the one hand you have no working gps and on the other hand you got random reboots with the TripNRaVeR Kernel.
We just need that damn S-Off
Click to expand...
Click to collapse
but since they have managed to find the way to get the gps back for the new hboots at TripNRaVeR Kernel ,im sure it will be available also for other kernels in anytime soon , , so let us wait and cross our fingers here , lucky me I have never needed the GPS here at my country
Well.. we all who have the 1.31 hboot needs to wait for a good performance and batterylife rom.
I really love vanilla rom = With out sense !
I dont know why but on the CM10 or AOKP roms all games working smoothless, buttersmooth! But with all sense roms, you get framedrops and sometimes slow. Why? i dont know why, even with jelly bean sense roms.
That is the diffrence of sense roms and CM10 graficperformance? Are there a way to go for another kernel on jellybean sense rom?
Thanks, hope for a good answer
I have the same problem, i flashed the Renovate rom and used the remove sense launcher and install themed framwork option to get rid of rosie and the ugly notification center... I use it in combination with Nova Launcher, and i must say, i like it!
You still have the default sense apps like music, mail etc, but i prefer them above the aosp variants so thats no problem for me
Live wallpaper flickering with CM10 rom tripNaver kernel
HTC Venom said:
but since they have managed to find the way to get the gps back for the new hboots at TripNRaVeR Kernel ,im sure it will be available also for other kernels in anytime soon , , so let us wait and cross our fingers here , lucky me I have never needed the GPS here at my country
Click to expand...
Click to collapse
Well i have a problem with CM10 with tripNraver kernel. i have display flickering with live wallpapers. I dont know why it happens but there are no flickering while gaming.
is there anyone else who has been through this flickering?
Would somebody be so kind to give me a link to the tripnraver kernel? And is it possible to use it with any AOKP Rom?
Sent from my HTC One X using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1956102
But it stills a lot buggy and im not sure will get the gps back
I contacted HTC about my bugs present on the 1.31 hboot and their response was :
Thank you for contacting our Customer Support Center.
With regards to your inquiry , kindly note that we have already started developing an update for your phone. Once available, it will be delivered to your phone through an over-the-air (OTA) process and you should receive a notification indicating the update is available for download.
Kindly note that if you rooted your device you won't be able to get the update .
You may refer back to the service center to be to retrieve the official software.
....service center contact details and address...blah blah...
Before sending the phone to the Repair Center, kindly make sure of the below:
1. Backup the device& remove all personal data.
2. Remove all accessories and send the bare unit. (SIM card, Headset, etc).
3. A copy of the POP if available.
4. Do send the device in a safe& sealed package (e.g. from the Post Office) but NOT the original box.
5. Please note that once the device is received at the repair center a full diagnostics will be made for it, in case it is found to be faulty due to miss-use, accidental damage or illegal firmware it will be regarded as out of warranty and you will be contacted regarding the cost of repair, if you choose not to pay for the quotation you can have the device back unrepaired but you will be charged for the labor fees and VAT
Click to expand...
Click to collapse
It seems they will downgrade(probably S-OFF then S-ON after downgrade) the hboot in the process.(And maybe if you're lucky they forget to S-ON )
Sent from my EndeavorU
Vcek said:
I contacted HTC about my bugs present on the 1.31 hboot and their response was :
It seems they will downgrade(probably S-OFF then S-ON after downgrade) the hboot in the process.(And maybe if you're lucky they forget to S-ON )
Sent from my EndeavorU
Click to expand...
Click to collapse
sent to Recycle Bin ha ha
In advance i'm new to XDA so if i break any rules or guidelines please let me know
Hi,
I rescently flashed my HTC One x(International) to CM12 using the video on onexroot . com site (XDA wont let me post a ousite link because i'm new -_-)
I had to flash a new recovery with a new layout and then flash the CM12 rom. So i installed the rom and it runs great (minus the known issues). So i was looking around and i saw that there was a newer version of the cm12 rom with bug fixes and what not so i wanted to update it but since i flashed the new recovery and rom i can't flash any CM12 based rom any more, when i try i get the errorERROR EXECUTING UPDATER BINARY IN ZIP i tried many different roms to make sure it wasn't a rom related issue and i used MD5sum checker to make sure the download wan't broken but i keep getting the error. So i'm hoping one of you can help me. (phone info below)
Htc One x (International)
Hboot 1.72.0000
Recovery TWRP v2.8.5.1 HOX Team Big
ROM CM12 -12-201550214-UNOFFICIAL -endeavoru
jg1337 said:
In advance i'm new to XDA so if i break any rules or guidelines please let me know
Hi,
I rescently flashed my HTC One x(International) to CM12 using the video on onexroot . com site (XDA wont let me post a ousite link because i'm new -_-)
I had to flash a new recovery with a new layout and then flash the CM12 rom. So i installed the rom and it runs great (minus the known issues). So i was looking around and i saw that there was a newer version of the cm12 rom with bug fixes and what not so i wanted to update it but since i flashed the new recovery and rom i can't flash any CM12 based rom any more, when i try i get the errorERROR EXECUTING UPDATER BINARY IN ZIP i tried many different roms to make sure it wasn't a rom related issue and i used MD5sum checker to make sure the download wan't broken but i keep getting the error. So i'm hoping one of you can help me. (phone info below)
Htc One x (International)
Hboot 1.72.0000
Recovery TWRP v2.8.5.1 HOX Team Big
ROM CM12 -12-201550214-UNOFFICIAL -endeavoru
Click to expand...
Click to collapse
have you tried to manually flash the update zip?
you said it happened also on other roms, are they all new layout roms? always tried with the same recovery?
lukes91 said:
have you tried to manually flash the update zip?
you said it happened also on other roms, are they all new layout roms? always tried with the same recovery?
Click to expand...
Click to collapse
Yes the roms are all CM 12 so with the new layout and no i have not tried manually flash the update zip. mainly because i don't know what it is and how to flash it.
and thanks for your reply .
jg1337 said:
Yes the roms are all CM 12 so with the new layout and no i have not tried manually flash the update zip. mainly because i don't know what it is and how to flash it.
and thanks for your reply .
Click to expand...
Click to collapse
I think it's enough to download it and flash it in recovery, just like a rom
lukes91 said:
I think it's enough to download it and flash it in recovery, just like a rom
Click to expand...
Click to collapse
Where can i get this update file ? is it located in the rom folder or ?
jg1337 said:
Where can i get this update file ? is it located in the rom folder or ?
Click to expand...
Click to collapse
the update file of a rom is released by the rom developer... check in the rom thread...
lukes91 said:
the update file of a rom is released by the rom developer... check in the rom thread...
Click to expand...
Click to collapse
Oh well i think i'm in a bit of a pickle then. I didn't download it from the developer but from the link provided by the video tutorial. I don't know where the maker of the video got it from. Unless there is a global updater i will try to contact the maker of the video for the source. Thanks
Used sunshine so now i think i need a recovery? Not sure which.. Also im on stock 4.2.2. Does anyone have a favorite rom and/or kernel I should try? Thanks
Edit: sorry i couldnt find my old thread b4 i made a new one. >.<
My opinion
Kannz2 said:
Used sunshine so now i think i need a recovery? Not sure which.. Also im on stock 4.2.2. Does anyone have a favorite rom and/or kernel I should try? Thanks
Edit: sorry i couldnt find my old thread b4 i made a new one. >.<
Click to expand...
Click to collapse
Welcome to the VZN M7 Forums! I have successfully used sunshine to unlock my BL on Android 4.4.3. I did a lot of research on which recovery I wanted to use. I had in the past on my Motorola RAZR and Droid4. I tried CWM 1st. Then found out that I had a possibility of loosing root. Out with CWM and in with TWRP. I made backups of my stock rooted phone. Then I installed a deodexed (debloated) KitKat ROM. I got a noticeable performance response. Less lag. I then looked into kernels. I chose ElementalX for the sheer power control it gives me. But, the ROM I was using wasn't supporting the changes I was making. Solution? I decided to do a full format and fresh install for ViperROM and ElementalX kernel. Also, just bought the EX kernel app.
Current setup:
Current TWRP Recovery
EX Kernel 18.0
ViperROM 7.0.2
Woo that ex kernel looks nice. Do you know a ruu I could use to update my firmware to use those an possibly a link to the current twrp? I can't wait to use dt2w.
Kannz2 said:
Woo that ex kernel looks nice. Do you know a ruu I could use to update my firmware to use those an possibly a link to the current twrp? I can't wait to use dt2w.
Click to expand...
Click to collapse
I only recommend going to either 4.4.3 or 4.4.4 since a lot of the M7 owners who have updated to Lollipop are experiencing issues of some sort.
TWRP 2.8.6.0.: http://forum.xda-developers.com/showthread.php?t=2416431
ViperROM 7.0.2: http://forum.xda-developers.com/showthread.php?t=2590358
EX Kernel: http://forum.xda-developers.com/showthread.php?t=2600691 #3 post
I also advise purchasing the EX Kernel App manager if you really like the Kernel features. This way you dont have to reboot everytime you want to change a parameter
Edit: looking for 4.4.3 and 4.4.4 RUU
Edit2: RUU found by another member
Use this to upgrade your firmware to latest version after that you can flash any rom you want
http://forum.xda-developers.com/showthread.php?t=2485319
This is the RUU link of the latest update
http://forum.xda-developers.com/verizon-htc-one/development/ruu-vzw-5-0-2-zip-exe-s-off-t3108076
If you don't want to upgrade to lollipop you these links
http://forum.xda-developers.com/verizon-htc-one/help/exe-ruu-vzw-m7-4-4-3-s-users-t2919442 OR http://forum.xda-developers.com/ver...nt/ruu-vzw-kitkat4-4-3-sense-6-s-off-t2867643
This link is for the rom i think this a very good rom
http://forum.xda-developers.com/verizon-htc-one/development/rom-nusenseven-sense-7-0-v1-00-t3056524
Kernel is here
http://forum.xda-developers.com/verizon-htc-one/development/kernel-elite-kernel-t3047318
Hope this helps :good:
By ex kernel manager do you mean trickster mod? Also which would be a good 4.4.3 rom?
Kannz2 said:
By ex kernel manager do you mean trickster mod? Also which would be a good 4.4.3 rom?
Click to expand...
Click to collapse
Yes i mean trickster mod. Actually i have a very little knowledge about kernels so it would be better for you to ask someone else and as for the RUU , I would recommend the lollipop RUU because it has the latest firmware otherwise you can use that 4.4.3. You can even flash the firmware only zip the first link in my previous post.
Uh well i installed the 4.4.3 ruu and flashed twrp then tried to install the ex kernel but it boot loops am i doing something wrong?
Kannz2 said:
Uh well i installed the 4.4.3 ruu and flashed twrp then tried to install the ex kernel but it boot loops am i doing something wrong?
Click to expand...
Click to collapse
Yes for using that ex kernel you have to update to lollipop version it wont work on 4.4.3 its in the description of that kernel. If you want to use 4.4.3 only try to use some other kernel.
Is there a way to downgrade to 4.4.2? So i can use this?http://forum.xda-developers.com/showthread.php?t=2600691 looking for a kernel that has dt2w or did i update and screw everything up? Wasnt really wanting to update to lolipop i heard it was buggy. Or could i use this?http://forum.xda-developers.com/showthread.php?t=2768254 it says gsm. Would it work with my verizon m7?
Kannz2 said:
Is there a way to downgrade to 4.4.2? So i can use this?http://forum.xda-developers.com/showthread.php?t=2600691 looking for a kernel that has dt2w or did i update and screw everything up? Wasnt really wanting to update to lolipop i heard it was buggy. Or could i use this?http://forum.xda-developers.com/showthread.php?t=2768254 it says gsm. Would it work with my verizon m7?
Click to expand...
Click to collapse
There you go use this to downgrade your firmware this will work just fine :good:
http://forum.xda-developers.com/showthread.php?t=2765784
And for that kernel you should ask in that forum only or you can pm the admin of that thread
That will bring me to 4.4.2? Cool ill try it out when i wake up. Been just wanting stock with dt2w. Ill let ya know how it goes. also which version do you use? Lolipop?
Kannz2 said:
That will bring me to 4.4.2? Cool ill try it out when i wake up. Been just wanting stock with dt2w. Ill let ya know how it goes. also which version do you use? Lolipop?
Click to expand...
Click to collapse
Yup i'm on 6.22.605.3 i used the official ota to update just downloaded the two zip files and flashed them in stock recovery. I'm noticing significant lag and hanging problem since i updated to lollipop. I'm also thinking to downgrade to 4.4.3 using the S-ON RUU i like to use pure stock but i have s-off and bootloader unlocked so that i can downgrade anytime. Remeber one thing never S-On your device a number of people did that and now they have bricked phone. Good luck happy flashing :good:
Thanks for the info. Gana try downgrading after I drink a gallon of coffee.
Hmm i got it to 4.4.2 but i cant get the elemental x kernel to install it just boot loops
Kannz2 said:
Hmm i got it to 4.4.2 but i cant get the elemental x kernel to install it just boot loops
Click to expand...
Click to collapse
i'm not getting your point , which revovery did you use to flash that kernel and which kernel did you use ?
Post that link in your reply.
I used the most recent version of twrp i think its 2.8.6.0 and i tried flashing this http://forum.xda-developers.com/showthread.php?t=2600691 oh it seems the version of sense the kernel requires is 5.5 and mine is 6.0 is that the problem?
Kannz2 said:
I used the most recent version of twrp i think its 2.8.6.0 and i tried flashing this http://forum.xda-developers.com/showthread.php?t=2600691 oh it seems the version of sense the kernel requires is 5.5 and mine is 6.0 is that the problem?
Click to expand...
Click to collapse
Try to erase cahce and then reboot again if that doesn't work then either problem is with the sense version or somthing else.
Looks like i need to flash a insecure kernel first then flash ex kernel. Also you know where to get the most recent version of ex kernel for kk?
Edit: is this it? http://elementalx.org/devices/htc-one-m7/
Kannz2 said:
Looks like i need to flash a insecure kernel first then flash ex kernel. Also you know where to get the most recent version of ex kernel for kk?
Edit: is this it? http://elementalx.org/devices/htc-one-m7/
Click to expand...
Click to collapse
You can't flash the GSM version of ElementalX on a Verizon m7.
You can look for latest ported version in Verizon m7 original development section.
I forget what the last version posted was, as I port and modify my own...but I'm pretty sure Kitkat is there.