Using usb host controller app.
Got a 5 pin usb otg cable, plug it in and it says "
s3c usb host driver not found!!! Root hub is not present, usb host mode not active or not avalible!"
in the app, i plug the cable in and it does say its connected in the status bar.
Any ideas, its the galaxy s2 from boost mobile, rooted, seen it work on the same phone on youtube and a few places, pretty sure its something simple. thanks in advance ^^
LinkKokiri83 said:
Using usb host controller app.
Got a 5 pin usb otg cable, plug it in and it says "
s3c usb host driver not found!!! Root hub is not present, usb host mode not active or not avalible!"
in the app, i plug the cable in and it does say its connected in the status bar.
Any ideas, its the galaxy s2 from boost mobile, rooted, seen it work on the same phone on youtube and a few places, pretty sure its something simple. thanks in advance ^^
Click to expand...
Click to collapse
The E4GT is not capable of OTG. It has been brought up many times. It seems to be a kernel problem.
Related
Hey! So i managed my S2 to work with an OTG adapter. Now it recognizes Flash drives, USB mouse and keyboard as well. My problem is though, that i'd want to use both the mouse and the keyboard simultaneously, and later on my tablet as well.
I've got a USB hub which was pretty cheap i guess,
ht tp://itmedia.sk/item-images/other-usb_omega_hub4portSTARpowercapable/it6818_2.jpeg?nc=032
When i connect it to the OTG adapter it lights up, and if there's a flash drive attached to it when i plug it in, the phone recognizes the flashdrive without problem. As soon as i plug in a second flash drive, the light goes off from the HUB and both of the sticks get unrecognized. Also, the mouse nor the keyboard works through the HUB somehow..
I need to buy a specific hub with OTG support or a power hub perhaps? Could anyone help in this? I looked over google and stuff but people seemed to say different stuff at almost every site.. Thanks!!
My Galaxy S has stock 4.0.3 rom with the Syjah S2 4.1.4 Kernel
Phones doesn't support usb hubs.
przemcio510 said:
Phones doesn't support usb hubs.
Click to expand...
Click to collapse
Oh well that's quite interesting. Then you're saying this piece of video could be fake perhaps?
Since i can post links yet, search for this on youtube: USB HUB Support On GALAXY S2
Check the very first video.
I'm convinced that the every phone can handle only one device connected at the same time.
przemcio510 said:
I'm convinced that the every phone can handle only one device connected at the same time.
Click to expand...
Click to collapse
Well, it surely doesn't seem that way, that's why i was asking, since it's possible.
Weird.... i got sgs2 and 4-port usb hub and when i connect 2 pendrives to hub and hub to phone everything works good (i see UsbDriveA and UsbDriveB). If your hub have dc input you can try connecting power supply to this hub. Maybe this hub isn't compatibile with your phone.
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Dropshots said:
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Click to expand...
Click to collapse
You'll need to buy a USB HUB (Get a powered one to future proof all your USB needs, you can get a USB 2.0 Hub pretty cheap). This will allow you to hook up at least 3 USB's to the OUYA. The Micro USB won't work for things such as hard drives or HID devices.
In the future, please use the search function before posting as this has been talked about in many other posts.
Dropshots said:
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Click to expand...
Click to collapse
I have a 4-port hub and it works fine connecting 1 storage and 3 other usb devices
I had this issue where only one harddrive could be used and If you have a harddrive with 2 partitions ouya wont mount it. Luckily I found an app called usbotghelper which does all the above I mentioned plus read and write and ext3 support. I wish it would get submitted to the ouya store so I could use the paid version that will mount on startup.
Hi all.
Had this unit for about two weeks. I've read various blogs / posts regarding OTG and I bought two cables from Monoprice. When I tried to connect either the PS3 controller or USB flash drive, the device doesn't recognize it.
I downloaded USB Host Controller and it has a message "S3C USB Host driver NOT found". A lot of sites show connecting a PS3 controller is fairly easy but I can't get this to work.
I'm on 4.3, not rooted. I'm not sure what I'm supposed to do. Do I have to root the device to get this to work?
Note no issues with USB charging. When I plug in to a laptop it does show up as a "media device". When I plug in the OTG cable I have no notification message.
I also have a S4, and when I plug in the same OTG cable, I can see a message 'USB connector connected" on notification. But I can't see the same message when i plug in my Nexus 7 2nd Gen.
Is this a common problem? Thanks in advance.
I am use star print and connect to a HP fax combo works fine. Need check USB debug in Dev option s. Noon rooted . also use otg explorer to play movie s I f a San disk 6Gb USB thumb. Both apps are $2.99 but. The lite version work great for testing
Sent from my Nexus 7 using xda app-developers app
Hello guys, I was wondering if you could help me out
I already have the phone (durr ) and the USB OTG Cable but my doubt is the following:
Can I have the USB OTG connected to the phone and to a Hub at the same time?
[btw:Being one of the ports of the USB Hub a charger and the other ones random stuff (such as mouse, keyboard and so on)]
matheusimmer said:
Hello guys, I was wondering if you could help me out
I already have the phone (durr ) and the USB OTG Cable but my doubt is the following:
Can I have the USB OTG connected to the phone and to a Hub at the same time?
[btw:Being one of the ports of the USB Hub a charger and the other ones random stuff (such as mouse, keyboard and so on)]
Click to expand...
Click to collapse
Pretty sure when in otg mode it will always be a power source and unable to charge but I could be wrong.
hello,
I bought this device:
http://www.amazon.com/Inateck-Ethernet-Chromebook-Supported-Aluminum/dp/B012N8KYWU
because it reads nice, I just got it but as i plug it in it only flashes and the tablet only detects is as chargeable device.
I can switch to RNDIS as i wanted to try ethernet, in the developer option but if I do that, the Pixel reboots and reset the option to the prior one.
It even doesn't recognize a USB Stick on that Hub.
Is the hub broken or is there another issue?
Thanks Avalun.
I recently bought this USB Hub / Ethernet adapter and have successfully verified that the USB ports work and the Ethernet port works. I turned off the WiFi while testing the Ethernet port to be 100% sure. I also had USB Debugging enabled when doing all this.
http://www.amazon.com/gp/product/B00ZWKHUSS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
thanks for the reply unfortunately that one is not available in the EU
Did you see this post?
http://forum.xda-developers.com/showpost.php?p=64316343&postcount=4
Yes but it doesn't have an ethernetport. Additinally that doesn't deliver to Austria too.