Related
Hi!
Does anyone know where to find ROMS for HKC G1000 (DUAL SIM WM6)?
Many thanks!
i have one. they sent it to me coz i complained about noise being picked up by phone1. tried reflashing, but still the same problem.
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
THOMYROS said:
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
Click to expand...
Click to collapse
There is Icon with green tree in Settings menu - search for it!
Hkc G1000 hard reset
Hi,
i have the same problem, i have installed a program now the phone is blocked in the windows boot up screen.
Did you solve the problem?
Could you help me please?
Thanks
try this
3 key press together for re-start:
G2 (Dial sim card 2 key) + Camera key (on the right side, near the on/off key) + on/off key.
9rinder said:
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
Click to expand...
Click to collapse
hi, can i have it? please provide a link for download. thanks... hopefully it will solve my noise problem on phone 1. thanks...
can you post your rom versions?
mine is Under Device Information: WM6_HKC_G1000_VER_07
Hkc G1000
Thank you very much Pranix,
it worked ,
but only after take off the battery for 15 min. and with G1 button at place of G2.
I'm also interested to have the Rom (just in case
If you can provide a link it will be much appreciated.
mine is:
ROM: WM6_HKC_G1000_VER_07
RADIO: PPC_DMDC_RIL_01.01
PROTOCOL: W8.5P8.4
DRAGONFLY: DV17-MODULE-VER-07.12.2
Just a curiosity: this pda it supposed to have 64 Mb of ram, but on "about" i read only 43,74 Mb,
it's your the same or not?
Thanks again
we have the same version.
http://uploading.com/files/G05UZJ16/HKC G1000.rar.html
hopefully someone here can modify and update it to wm 6.1
how's the sound quality of your phone?
i have a problem with phone 1, it picks up alot of ambience noise.
difficult to hear the other person you're talking to.
if you put your hand over the mouthpiece, and also the earpiece, it creates a feedback sound.
no problem on phone 2.
Hkc G1000
Hi Pranix,
thanks for the rom file after i'll ask you how to flash it.
My phone works good both sims, your, sounds to be an hardware
problem, since you told that you have flashed the rom.
The set of the microphone for the sim 1 is too sensible, and when you put the hand on the micro, it cause what is called "larsen effectc", that happend when the sensibility of the microphone is too high and trigger a feedback from the earphone that cause an annoying whistle .
In an italian forum, I heard about an engineering code to write down in the
china phones with WM6, that allow you to set some hardware features
of the phone including the sound level, I don't know if this is possible also with our phone. but it worth a try.
I'll go to ask in the forum and if pertinent, i'll post you the answer.
Bye
hi,
the procedure to flash is in the rar file that i have uploaded.
just open the text file.
hope you can find some way to minimize the sensitivity of microphone setting for phone 1.
regards,
pranix
Hi Pranix,
he say that the code "engineer mode" it is available only on the china phones with the RTOS operating system, and in some motorola and Nokias,
but he say that maybe it is possible to change the parameters set on the windows registry, with a pc program like CeRegEditor.
Connect the phone to the pc, start CeRegEditor, make it read the registry, click on unlock (if not you can't save the changes), after that you have to look where are located the keys regarding the audio, and see if modifiyng the key value you can solve the problem.
I will look further if i find some else solution
good luck
i already tried editing registry however still the same.
maybe i was editing the wrong registry. hehe
i just hope that 9rinder gets to post his rom here
Pranix said:
i just hope that 9rinder gets to post his rom here
Click to expand...
Click to collapse
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
9rinder said:
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Click to expand...
Click to collapse
hi,
can you post your rom details?
i downloaded the rom, it seems your rom & my rom are the same.
i checked the date & time stamp, its identical.
i also asked my contact at hkc, still no new rom since i asked for it sometime june.
how's the audio quality on your phone 1 & phone 2?
can you hear the calling party clearly?
oxyjo said:
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
Click to expand...
Click to collapse
i've actually tried editing those registries before however still the same.
the question here is that do we have one or two mircrophones?
coz if only one, then there must be a setting somewhere to adjust phone 1 & phone 2. phone 2 sound is better than phone 1.
if two microphones, i cant find the settings as there is only one setting to tweak.
Hello. I have one of this PDa.
Mine has this ROM:
ROM version:WM6_SITRONICS_SD106_VER_05
Radio version: CYNTHIA850_DMDC_RIL_01.01
Protocol version: W8.5P8.4
Dragonfly Version:CYNTHIA850 TF-DV17-MODULE-VER-07.16 Feb 18 2008 13:02:06
Do you recommend me to update?
Is any way to "extract" its original ROM?
And is any way to "edit" any of your roms to change the language of the OS?
Thanks
Hi,
I'm opening another testing thread for android development.
This thread aims at testing the diamond panel power up / down code that I've reworked.
It has been already tested on my DIAM100 with a sharp panel but I need some more tests on different diamonds. From what I've seen, the diamond 500 do not yet have any panel code but I need some diam500 users to confirm that with a small log.
THIS THREAD IS FOR PEOPLE WHO KNOW HOW TO USE ANDROID AND ADB.
Any feedback is welcome. If you're experiencing problems, please attach a dmesg log so that I can analyze the problem, otherwise I probably won't be able to do anything to help you.
People who wants to help but don't know how to make a dmesg log should start by searching for a guide on the forum. Once you've got adb working and know how to make a dmesg log, then follow the small instructions bellow.
Source tree : http://gitorious.org/~jbruneaux/lin...ux-msm-home-work/commits/htc-msm-2.6.27-panel
Logging instructions:
If you want to make a usefull dmesg log, then follow these few steps :
1/ Reboot your phone (that way, I can get the boot log, which contains tons of usefull debug outputs).
2/ Once the phone is booted into android, make a first dmesg log to ensure we have all the boot logging data
3/ Now, turn off / on 3 times the screen
4/ Make a new dmesg log
5/ Post the two dmesg logs along with a short description of the problem you encoutered (i.e screen does not power up or must be "forced" to be turn on by blind touching the unlock bar, ...).
Link to the kernel package : http://www.4shared.com/file/uIoHquR7/kernel_modules_diam_panel_2011.html
Just an idea: wouldn't you get a much broader reply if you create an initrd script that does all that logging stuft onto the FAT partition automatically?
virus if we lower screen resolution of diamond l480 x 640 in to 320 x 240 we can gain speed i dont know how to do it like james which is doing rhalp nand project did in ralp n gain speed as 36.5 in neocore like huawe u8150 hav same processor as diamond n running on 320 x 240 resolution ?? i was wondering if this is possible ppl tried but they are unable to find data sheet od diamond if u could help in this helicopter88 did lower but he dont know how to scale ?
xtremists said:
virus if we lower screen resolution of diamond l480 x 640 in to 320 x 240 we can gain speed i dont know how to do it like james which is doing rhalp nand project did in ralp n gain speed as 36.5 in neocore like huawe u8150 hav same processor as diamond n running on 320 x 240 resolution ?? i was wondering if this is possible ppl tried but they are unable to find data sheet od diamond if u could help in this helicopter88 did lower but he dont know how to scale ?
Click to expand...
Click to collapse
In fact, helicopter88 has already contacted me for this downscale but I don't have any clue on how it does work. Right now, my aim is not especially to get the diamond running faster but to improve the panel power on/off because I've got this fix for a long time now but before submitting it for the main tree, I must have some tests on different devices.
Maybe if helicopter88 or james have successfully reduced the resolution we can see how to make it available for all users if it really accelerate the global device speed.
Datasheet are not available for most of the components of our devices and qualcomm have protected all those stuffs with DNA and things like that. We have a few application notes but nothing really specific to one phone or one component. The only way we can work is with other official kernels and reverse engineering.
Regards, Jerome
I'd like to test this out,once i fix my phone...
No datasheet for our phone,is really hard to find what needs to be changed to scale the display..
this one consuming battery as i think and screen is pretty gud thn other kernls
hi Jerome
Nice work! thanks for looking in that matter ! That issue kept me from using android since it was quite a pain to wake the panel up !
Now the screen powers up pretty faster, even though i still see some glitches sometimes (but less than before) and seems like it's more difficult to power it on while it's sleeping (sleep mode is set on 1 in startup).
I'll do a dmesg later on, if I remember well, my diam has a toshiba panel..
DIAM100 using latest xdandroid FRX06
FRX06
mchh said:
hi Jerome
DIAM100 using latest xdandroid FRX06
Click to expand...
Click to collapse
Hi,
could you please tell me how to install xdandroid FRX06 on my diamond? On http://xdandroid.com i found only "ext2" zip package, i dont know how to use this...
thank you.
D/
Hi said:
http://xdandroid.com[/url] i found only "ext2" zip package, i dont know how to use this...
thank you.
D/
Click to expand...
Click to collapse
download http://files.xdandroid.com/FRX06_Full_Bundle_25.3.2011.zip
unzip in your SDCARD
select the startup for your device
and run haret
market
lqtdc said:
download http://files.xdandroid.com/FRX06_Full_Bundle_25.3.2011.zip
unzip in your SDCARD
select the startup for your device
and run haret
Click to expand...
Click to collapse
Thanks very much for bundle. I had some problems with running haret (it always does softreset after start..) but it seemed to be problem of energy rom, I flashed back stock rom and it works fine.
I had also problem with calibration but deleting calibration file solved id.
Now, android is running quite well, but I can't download anything from market. (It always says after while that download was unsuccesfull). I have google account, synchronizing with gmail works fine but market not.
Can you help me with that?
Thanks.
Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?
Canelis said:
Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?
Click to expand...
Click to collapse
Not heard of this device. Perhaps a chinese copy of HD2.
OK, found something. It runs on Android, so you can only run Android apps. BTW what exactly you mean when you say things needed?
Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!
Canelis said:
Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!
Click to expand...
Click to collapse
It runs 2.2 (as mentioned on the web), I don't have any idea if it can be upgraded, as you may know 2.2 isn't the latest version.
For GPS, you can check its specs if it has GPS or not, if yes then you can install the apps from the market otherwise perhaps connect an external GPS, although I am not sure weather an external will work or not.
You can click on 'Thanks' button, if I helped.
Model number : T8585
Android version: 2.3.4
Based Version : MAUI.11AMD.W11.19.SP.V1,2011/6/23 00:50
Need "working" GPS !!!!!!!
Maybe it could help us to help you if you could post the link.
The chinese website where I saw this, mentioned Android 2.2.
Many app not work on this mobile !
Maybe this will help : - h**p://www.efox-shop.com/hd9-mtk6573-4-3-zoll-kapazitiver-touchscreen-handy-wlan-umts-android-2-2-gps-dual-kamera-dual-sim-bluetooth-p-236121
since it is running android, so the compatible android apps should run on it, but since its a Chinese clone, no guarantees.
You can trying looking at other android phones by HTC or some other brand, to be safe.
You can try this rom Update_HD2_3G.zip www.multiupload.com/XOVS2HZTHO to remove all chinese aplications and to improve everything.
forum.china-iphone.ru/viewtopic.php?f=22&t=15521
Installation Guide
http://forum.xda-developers.com/showthread.php?t=1423489
For fix GPS:
Enter *#*#3646633#*#*
Go to YGPS
Wait for the green satellites appear.
Go to NMEA Log
Click "save" wait 5 minutes and then click "stop". Repeat the process after 1 hour.
Is your cellphone the same of this?
fastcardtech.com/goods.php?u=41964&id=6655
I bought 1 of them.
Now HTC mobile phone is also very popular in China. But i am sorry i don't have it. It is a little expensive.
Is it upgradable to ICS???
.
Thread moved. Would advise you to read forum rules and post in correct section.
Hi all
I want to present you the work done by Serg090909 on the 2 Din Chinese Car audio system many people begin to use.
This sort of Car audio use WinCe 6.0 for Radio/TV/BT and the Android part for GPS and everything android can handle.
I only found information about modification in russian language by this famous guy i want to thanks gratefuly : Serg090909.
He made possible to boot from Sd-Card new builds (apollo tvbox and caravn776 build) for this sort of car audio and called it "GIBROID".
With this way, you don't touch at the Nands and don't damage your system.
Insert back your original Sd-Card to boot normally, nothing is replaced in the nands when you switch to your GIBROID Sd-Card
Work has been done to backup your nand and write nand again, but for end users GIBROID from Sd-Card is a better thing and the easiest way to do.
You can find the link here :
New Serg090909 2014 Build at 26 november 2014 :
Part 1 of 4
Part 2 of 4
Part 3 of 4
Part 4 of 4
New Update at 3 december 2014 :
Caravn 4.0.4-776 500mb No bluetooth
Caravn 4.0.4-776 500mb With bluetooth
GIBROID 11 January 2014 Old Build
Part 1 of 3
Part 2 of 3
Part 3 of 3
GIBROID 01 November 2013 Old build
Part 1 of 8
Part 2 of 8
Part 3 of 8
Part 4 of 8
Part 5 of 8
Part 6 of 8
Part 7 of 8
Part 8 of 8
Video of GIBROID switching apollo tvbox to caravn776 build
UPLOADING, link available later today
Other needed files
A10 Backup sh
A10 Repack
Restore Backup
Adb Rom Backup A10 A13
Extract Dump from native firmware
PhoenixSuit
Switch Apollo Caravan
I 'll post pictures and updates to this thread and if anybody is interested in helping me reporting in English the continuous work of Serg090909 you are welcome to participate and report results here.
Thank you and have happy tests.
To readers : Respect the rules of XDA Forums and don't link to warez sites where you could found information about this
To moderators : Could it be possible to give me the right to post hyperlink or if not possible i'll wait 10 posts
To Serg090909 : I don't speak russian and Google translations are not easy so if you want to help here you'll be my guest star
HOW TO :
Install GIBROID on Sd-Card :
- Use Win32 Disk Imager (sourceforge.net/projects/win32diskimager) to Format Sd-Card and write "GIBROID-4G-11012014.img".
This image is 4g space. You can use max 32g Sd-Card, but since this operation use all the space of the Sd card you are invited to expand the rest of the Sd-card space for User space
- Use MiniTool® Partition Wizard Home Edition 8.1.1 (partitionwizard.com/free-partition-manager.html) to expand the Sd-Card space.
- Place your GIBROID Sd-card inside the GPS Slot and keep safely your original Sd-Card.
Screenshots to Switch from Apollo to Caravn :
See (Screenshots) Switch from Apollo to Caravn.rar Attachments
Backup/Write Nand for "experts" :
Dump to the Sd-Card
- Download the script a10-Backup-SH (See Attachments). Copy it in the root of the SD card
- Install SU and Android Terminal Emulator with Play Store
- Run the terminal and see the operating system prompt a dollar sign ($)
- Type su and press Enter
- Type cd/mnt/extsd
- Type sh a10-backup.sh all
Restore Dump
See "Restore Dump" attachments
Compatibility List :
Klyde KD-7200d
Erisin
N708
Post your models
...
...
Hints :
Not related to GIBROID, this sort of car audio have a Hidden Menu in WinCE6 Part.
Hidden Menu :
- Go to settings
- Press 1357 with the remote controller
- Tadaaa !
Credits and Thanks all goes to Serg090909 and all the peoples involved in explanations, informations and helps.
Reserved
Another Reserved
Last Reserved
Chandler13 said:
Last Reserved
Click to expand...
Click to collapse
good work...
i try to read the russian thread with help of google translater....
its possible and very funny
found the password after 2 hours reading the russian thread...
..............................
................
............
....
simeri said:
good work...
i try to read the russian thread with help of google translater....
its possible and very funny
found the password after 2 hours reading the russian thread...
..............................
................
............
....
Click to expand...
Click to collapse
Password (4pda)
Password
Can't seem to find the password
Could you please be so kind to help me?
Best regards
Daniel
tykketyr said:
can't seem to find the password
could you please be so kind to help me?
Best regards
daniel
Click to expand...
Click to collapse
password is - 4pda
WOW, thanks!
I installed this image onto a SD-card and it worked! It is verry stable and I didn't have any hang ups on boot! GREAT!
I have a couple of questions/remarks
The boot image is a skull and I want to change it to something more friendly Where can I find this image to change it, using total commander to do it for example?
Thing is: Now my bluetooth dongle doesnt work anymore. I have the buetooth button but I cannot turn it on (well, I can but it turns off again)
Even if I try to connect my dongle directly without HUB it doesnt respond. Is this a driver issue or do I have a wrong dongle for this image? The old serge Image did work with my dongle so can someone tell me if they have BT working and which dongle they use?
Also, the Wifi dongle doesn't work as well as it used to. I didn't have much time to figure out what happens but it connects but drops connection and doesnt work that great,. I will keep you guys informed if I know what the wifi dongle does and doesn't do.
drogert said:
WOW, thanks!
I installed this image onto a SD-card and it worked! It is verry stable and I didn't have any hang ups on boot! GREAT!
I have a couple of questions/remarks
The boot image is a skull and I want to change it to something more friendly Where can I find this image to change it, using total commander to do it for example?
Thing is: Now my bluetooth dongle doesnt work anymore. I have the buetooth button but I cannot turn it on (well, I can but it turns off again)
Even if I try to connect my dongle directly without HUB it doesnt respond. Is this a driver issue or do I have a wrong dongle for this image? The old serge Image did work with my dongle so can someone tell me if they have BT working and which dongle they use?
Also, the Wifi dongle doesn't work as well as it used to. I didn't have much time to figure out what happens but it connects but drops connection and doesnt work that great,. I will keep you guys informed if I know what the wifi dongle does and doesn't do.
Click to expand...
Click to collapse
Serg090909 is working on a new build that will be released shortly based on Apollo. The Bluetooth will work again.
Teaser
The actual build you use don't contain Bluetooth libraries, that's why you can't use Bluetooth (can be implemented manually with terminal but didn't test since a new release is coming).
Of course you can change the wallpaper as you wich like you would do with your phone and the boot image too (but i didn't digg to find the boot image actually).
I don't know what to say about your wifi, my dongle works like a charm without connection drop.. Maybe the wifi implementation was a bit buggy for some.. Let's wait for the new release !
Chandler13 said:
Serg090909 is working on a new build that will be released shortly based on Apollo. The Bluetooth will work again.
Teaser
The actual build you use don't contain Bluetooth libraries, that's why you can't use Bluetooth (can be implemented manually with terminal but didn't test since a new release is coming).
Of course you can change the wallpaper as you wich like you would do with your phone and the boot image too (but i didn't digg to find the boot image actually).
I don't know what to say about your wifi, my dongle works like a charm without connection drop.. Maybe the wifi implementation was a bit buggy for some.. Let's wait for the new release !
Click to expand...
Click to collapse
Thanks Chandler13!
You and Serge090909 have been a real help on this topic. First I thought no one would care about these android radios and I would be stuck with the stock firmware! Now, I have a radio which does so much more and it looks nice! Even if there is going to be a new release which I cannot wait to put into my radio!. The teaser looks nice and has a great look/skin. I didnt understand what this apollo was, is this the musicplayer? It looks great anyway! I was just wondering, since we are running the OS from a SD-card, is it possible to make the internal memory a little bit bigger. This way we could install apps with no bother that it runs out of memory. 2 GB would be more then enough. I am running the OS from a 32GB-Sdcard so I have room to spare :laugh:
Thanks for the tip for the background, I allready changed the background but I didn't find the boot-image either...
I allready solved the problem with the wifi-dongle. I was in my car and next to my home, but my wifi signal wasn't that great. I used my iphone to make a hotspot and it worked like no other!
drogert said:
Thanks Chandler13!
You and Serge090909 have been a real help on this topic. First I thought no one would care about these android radios and I would be stuck with the stock firmware! Now, I have a radio which does so much more and it looks nice! Even if there is going to be a new release which I cannot wait to put into my radio!. The teaser looks nice and has a great look/skin. I didnt understand what this apollo was, is this the musicplayer? It looks great anyway! I was just wondering, since we are running the OS from a SD-card, is it possible to make the internal memory a little bit bigger. This way we could install apps with no bother that it runs out of memory. 2 GB would be more then enough. I am running the OS from a 32GB-Sdcard so I have room to spare :laugh:
Thanks for the tip for the background, I allready changed the background but I didn't find the boot-image either...
I allready solved the problem with the wifi-dongle. I was in my car and next to my home, but my wifi signal wasn't that great. I used my iphone to make a hotspot and it worked like no other!
Click to expand...
Click to collapse
Apolllo Tv is another build in short, Serg090909 gived us the choice to launch the "Caravn" build, or the Apollo Build at first start till you choose to boot only one of both. Clean launcher parameters to take a look at apollo UI.
I just reported the very good work done by Serg090909 and i'm glad i'm not the only "french-english and others" to enjoy his work.
Believe me, it's a pain in the ass to traduce russian to english for a french ..
Of course you can expend the partition, i'll post more about this and making own builds.
And about a surprise i'm preparing for the WinCe part....... :angel:
To be Continued..
Chandler13 said:
Apolllo Tv is another build in short, Serg090909 gived us the choice to launch the "Caravn" build, or the Apollo Build at first start till you choose to boot only one of both. Clean launcher parameters to take a look at apollo UI.
I just reported the very good work done by Serg090909 and i'm glad i'm not the only "french-english and others" to enjoy his work.
Believe me, it's a pain in the ass to traduce russian to english for a french ..
Of course you can expend the partition, i'll post more about this and making own builds.
And about a surprise i'm preparing for the WinCe part....... :angel:
To be Continued..
Click to expand...
Click to collapse
Nice! I love surprises
I also had the honor to translate some posts from Serge into english and I must say Google translate does a hell of a job. I didn't expect that :good:
Sure, you do get a lot of jibirish but if you read carefully you can allways make out what it says.
I'm actually dutch so my french isn't that good either. So i'm glad this wasn't in french or else I would be translating my ass off
Keep me updated about your surprise and the new build. I can't wait!
Any news on this new ROM?
Low memory alarm
Chandler13 said:
Apolllo Tv is another build in short, Serg090909 gived us the choice to launch the "Caravn" build, or the Apollo Build at first start till you choose to boot only one of both. Clean launcher parameters to take a look at apollo UI.
I just reported the very good work done by Serg090909 and i'm glad i'm not the only "french-english and others" to enjoy his work.
Believe me, it's a pain in the ass to traduce russian to english for a french ..
Of course you can expend the partition, i'll post more about this and making own builds.
And about a surprise i'm preparing for the WinCe part....... :angel:
To be Continued..
Click to expand...
Click to collapse
Man, I'm very grateful for your big help! I have a N708 installed in my new civic 11 and the worst problem is that all I install in android comes to the internal memory not to the SD card, can I change this?
Move to NAND??
Hi I´m from Argentina, and I also must thank Serg090909, Chandler13 and Google translator. They made up a team that brought my unit back to life!
I had a problem with my original rom and screwed it up trying to fix it with terminal commands. It didn't boot at all and I couldn´t find a solution until this thread.
Now, I wanted to know if there is any way to flash this rom to the internal nand. I got nothing to lose since the damage is already done.
Thanks in advance!
Hi all !
Hello,
I'm french and I'm interested by this thread forum...sorry for my English.
The mine update via sd card too.
I have this model of car audio (WinCE 6 + Android 4)
Can confirm that it would work with my car radio?
Otherwise, I do not understand ... What can it do for me? boot other bluids with bluetooth support ? no affect my actual firmware ?
PS : I try this : in CE mode : Go to settings, Press 1357 with the remote controller..... but nothing appear
--> This might help people who have the same as me!
------------------------------------------------------------------------
Otherwise, I had a startup problem on android, I asked the firmware to the dealer:
I managed to restart ... but it does not have me delete all my installed apps, just allowed me to restart (I do not know how, but its work (the firmware is 210 MB).
This firmware link (with explanation) :
https://www.wetransfer.com/download...71d307e45402858f585c713020140228070442/b7d4f9
thx!
Reflashing
I think that this thread is dead. I hope I`m wrong, since is the only one that deals with firmware for the device I have.
I tried to connect my laptop to the head unit and flash the firmware to nand but i failed.
What I did:
1) power off unit
2) connect laptop to USB OTG where the wifi dongle is, using a male-male usb cable.
3) power on unit holding menu and volume knob pressed.
4) screen goes black and stays there.
5) computer detects nothing.
Possible causes:
My android system is beyond repair ( I don't think this could be the problem, since it boots perfectly with gibroid on SD card)
too many extensions for usb cable. 1from the back of the unit to the dashboard and then the "male-male" usb cable...
Many many other of which I have absolutely no Idea.
In addition to this, livesuit tells me that gibroid image is not valid.
Any ideas?
Cabezalimon said:
2) connect laptop to USB OTG where the wifi dongle is, using a male-male usb cable.
Click to expand...
Click to collapse
Hi,
This is not OTG, in order to connect to android part via USB you'll have to disassemble the unit and find a real usb otg on android board. it is located right next to the socket where the 'wifi' marked cable is connected.
stepashka said:
Hi,
This is not OTG, in order to connect to android part via USB you'll have to disassemble the unit and find a real usb otg on android board. it is located right next to the socket where the 'wifi' marked cable is connected.
Click to expand...
Click to collapse
Thanks!
I've been reading about phoenix card software. Apparently it could flash the firmware from an SD card for allwiner chips. I guess I could try that before disassembling the unit. I'll let you all know how that goes.
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270