Hello everyone. Before present anything about this kernel, first I must clarify that I'm not a kernel developer but I'm trying to learn all kernel stuff and knowledge during my free time and finally YEAH, I'M DID IT!
So I'm here proudly introduce my Skull Kernel for JellyBean which fully tested on CM10/CM10.1 by arco68. :fingers-crossed:
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are two kernel version in this thread. One for CM10, another one for CM10.1.
Upon flashing, you should know what you are doing and responsible
for anything bad happen. e.g. Hard brick, soft brick, etc.
But don't worry, I'm the one always getting kernel tested before released,
So I should get hurt first if something goes wrong. :angel:
YOU WERE WARNED!!
CM 10.1 Kernel
Features
Kernel version 3.0.74
Compiled with Linaro Toolchain GCC 4.7.3 2013.04
O3 optimization for both kernel and module
Governor selectable: lulzactive(v2) (DEFAULT), smartassV2, hyper, ondemand, interactive, performance, powersave, conservative
IO scheduler: row (DEFAULT), sio, bfq, cfq, deadline, noop
Moremem support with 360 MB available ram.
Kernel overclock (OC) till 1804 Mhz (Optional, default max freq - 1401 Mhz, min freq - 245 Mhz)
Stock voltage
Optimized ARM RWSEM algorithm
Optimized lib/string and lib/memcopy
Google snappy compression
Dynamic file sync control
Dynamic writeback function to gain better performance
Updated lowmemorykiller (LMK)
Increased CPU frequency during boot
Disabled Gentle Fair Sleepers for better UI performance
Entropy tweak
LOAD_FREQ (4*HZ+61) avoids loadavg Moire
VDD level sysfs interface
Frandom (fast random generator)
Dynamic readahead size based on device disk size
Kernel Source
Link: Github
Click to expand...
Click to collapse
Screenshots
Changelog
v1.1 (Moremem)
[Download]
* Moremem config - 360 MB available ram.
* Few more kernel fix (other changes same with defaultmem config).
v1.1 (Defaultmem)
[Download]
* Defaultmem config - 350 MB available ram.
* Use glibc for lib/memcopy and lib/string
* Change default gov to lulzactive (better reactivity)
* Fix lowmemorykiller update
* Fix overclock code
* Fix loadavg calculations (thanks DerTeufel, AndreiLux, and voku for pointing this)
* Update dynamic file sync control to v1.1 (credit faux123)
* Revert to stock voltage (Allow modify voltage through CPU tweaking apps. e.g. Voltage control, setCPU)
* Entropy tweak: fix entropy depleting
* Dynamic writeback during screen on/off (credit franciscofranco)
* Disabled Gentle Fair Sleepers for better performance
* Various small kernel fix
* Sync with arco latest changes
v1.0
[DEFAULTMEM]
[MOREMEM]
* Initial release.
* Normal - 351 MB free ram / Moremem - 357 MB free ram
Instruction
Boot to recovery.
Flash the kernel.
Wipe cache & dalvik cache.
Note: If you encounter deep sleep or force close problem after flashing my kernel, please fix permission through CWM recovery. This may help.
Credit
Master arco68 (many thanks for his source)
Kernel Dev that hold similar device like hadidjapri, Christopher83, erik and CastagnalT for help
hotheabilly be my tester
Some github guys that I follow
anyone looking at my thread!
Google for making this possible
You are welcome to give any feedback and remember to click thanks if you feel happy with my kernel. Thanks
CM 10 Kernel (Not often getting update)
Features
Kernel version 3.0.70
Compiled with Google 4.7 GCC for more stability
Overclock until 1804 Mhz (Optional, default max freq - 1401 Mhz, min freq - 245 Mhz)
Highmem support with 370 MB available ram. (updated v3.1.1)
Governor selectable: lulzactive(v2) (DEFAULT), smartassV2, ondemand, interactive, powersave, performance, conservative
IO scheduler: row (DEFAULT), bfq, cfq, deadline, noop
VDD level sysfs interface
Frandom (fast random generator)
Dynamic readahead size based on device disk size
Writeback optimized during screen on/off for smooth experience
Included CM10 features
Changelog
v3.1.1
[HIGHMEM]
* HIGHMEM only.
* Reduce HIGHMEM support to 370MB ram available. It seem better.
v3.1
[DEFAULTMEM][MIRROR]
[HIGHMEM][MIRROR]
* Kernel completely develop again. Remove most crap that may cause system slow.
* New wifi driver from arco. (WEP support still broken)
* Switch to Google 4.7 GCC toolchain.
* Bring highmem support. New release two version available, DEFAULTMEM (351 MB) & HIGHMEM (375 MB)
* Added frandom support.
* Whiteback and readahead size tweak.
* Small kernel fix.
* Kernel source sync with arco latest changes.
v3.0
[Download]
* Totally fresh and remake kernel. (switch to new branch / working environment instead of previous crappy build)
* Change default governor to lulzactive.
* Revert unneeded tweaks and make it less complexity, thus gain best performance and battery life through.
* Added O3 optimization.
* Should fix the lag issue. (confirm!)
Skull Kernel - prune [Download]
(Remove download link as this kernel has lag issue that reported by some users)
v2.0
[Download]
* Added smartassV2 and lulzactive governor.
* Disable both cleancache and frontcache as it slow down the overall system performance.
* Re-work entire ondemand governor and at the same time tune it become more battery friendly.
* Fix white noise. (credit arco68)
* Some other small fix.
v1.1
[Download]
* Rename the kernel to Skull Kernel
* Compiled with latest linaro GCC 2013.02
* Added OC support up to 1804MHz (max and min frequencies set to 1401MHz and 245MHz on boot respectively)
* Sync with arco latest changes
v1.0
[Download]
** Initial Release
Re: [Kernel][CM10][3.0.66][non-OC] keff-JAY-always v1.0
finally you release this kernel
Sent from my GT-I8150
hadidjapri said:
finally you release this kernel
Sent from my GT-I8150
Click to expand...
Click to collapse
Here I come
Re: [Kernel][CM10][3.0.66][non-OC/UV] keff-JAY-always v1.0
Too bad, I want to try your kernel but its not oc'ed and uv'ed, will give it a shot couple days later
-sent from my awesome phone-
hotheabilly said:
Too bad, I want to try your kernel but its not oc'ed and uv'ed, will give it a shot couple days later
-sent from my awesome phone-
Click to expand...
Click to collapse
Depend on you guys, if all need OC support I will implemented on next version.
It's already UV now
It's always great to see new custom kernels. I'd probably try this one out in its future releases as I'd like to see more changes and improvements.
P.S: The name of your kernel needs to be revised in my opinion.
allkpop said:
It's always great to see new custom kernels. I'd probably try this one out in its future releases as I'd like to see more changes and improvements.
P.S: The name of your kernel needs to be revised in my opinion.
Click to expand...
Click to collapse
haha, ok I will consider another good name for then!
Re: [Kernel][CM10][3.0.66][non-OC/UV] keff-JAY-always v1.0
Woohooo... said:
haha, ok I will consider another good name for then!
Click to expand...
Click to collapse
maybe change to be MY kernel..my mean 'u' who make this kernel..and my also mean malaysian kernel..haha..just kidding
Sent from my GT-I8150 using Tapatalk 2
first post updated with new kernel, 'Skull kernel v1.1'
Some changes are made:
* Rename the kernel to Skull Kernel
* Compiled with latest linaro GCC 2013.02
* Added OC support up to 1804 MHz (max and min frequencies set to 1401MHz and 245MHz on boot respectively)
* Sync with arco latest changes
Wow..another kernel to try. Will try it later. Just flashed hadi kernel this morning.
Hopefully it has a good performance for gaming.
Thank you for your work making this kernel.
Re: [Kernel][CM10][3.0.66] Skull Kernel v1.1 - 'Balance Performance & Battery Life'
If i'm not wrong it's using different title before, :what:
haha skull seems legit.
Then you should change the bootscreen with skull.
Can you add lulzactive and smartassv2 too?
Tried your kernel, gaming performance was smoother. Thanks
coliv_aja said:
If i'm not wrong it's using different title before, :what:
haha skull seems legit.
Then you should change the bootscreen with skull.
Click to expand...
Click to collapse
Yeah, actually I'm thinking the same thing too, wanna replace the boot logo with skull image (so COOL!), but don't know the way to do it.
[email protected] said:
Can you add lulzactive and smartassv2 too?
Tried your kernel, gaming performance was smoother. Thanks
Click to expand...
Click to collapse
Thanks. About the governor, cause I'm very satisfy the speed of my tweaked ondemand. So not thinking adding other governors lol...
Okie, if + more people request me add governor again, I will consider it
Re: [Kernel][CM10][3.0.66] Skull Kernel v1.1 - 'Balance Performance & Battery Life'
Woohooo... said:
Yeah, actually I'm thinking the same thing too, wanna replace the boot logo with skull image (so COOL!), but don't know the way to do it.
Thanks. About the governor, cause I'm very satisfy the speed of my tweaked ondemand. So not thinking adding other governors lol...
Okie, if + more people request me add governor again, I will consider it
Click to expand...
Click to collapse
+1 for more governors.
I'm also thinking of trying this kernel. Please add smartassv2. It really saves battery in my opinion.
Sent from my GT-I8150 using Tapatalk 2
Seem that all of you like my cool name for this kernel - SKULL. I'm very appreciate it. :laugh:
So, add more governors is a "MUST" should be implemented on next version.. how about others?
Please specify, I will add in if I capable to do it!
thanks you master
Re: [Kernel][CM10][3.0.66] Skull Kernel v1.1 - 'Balance Performance & Battery Life'
It's bigmem like hadijapri's kernel??
Sent from my GT-I8150 using xda app-developers app
riztdroid said:
It's bigmem like hadijapri's kernel??
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
No, currently stick with 352mb ram.
Re: [Kernel][CM10][3.0.66] Skull Kernel v1.1 - 'Balance Performance & Battery Life'
[email protected] said:
Can you add lulzactive and smartassv2 too?
Tried your kernel, gaming performance was smoother. Thanks
Click to expand...
Click to collapse
What schedule n gov. Your use??
Sent from my GT-I8150 using xda app-developers app
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi and welcome to fancy kernel. My name is Boy Petersen and I'm building this kernel with the following three main goals: good battery life, reliability and a smooth and snappy user experience.
Feature list:
Based upon:
latest AOSP/CM11 kernel source
selected Cyanogenmod patches
Latest Linux 3.0 version (3.0.101)
selected patches from the device's chipset vendor Texas Instruments
selected patches from Google
selected backport-patches from Linux 3.4
CPU:
CPU frequencies: 224, 384, 537, 729, 1036, 1228, 1344, 1420, 1536 MHz (default on boot: 224 - 1228)
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Will help with smoothness and responsiveness when you use the phone. When screen is off, however, 224 MHz frequency is used as well.
CPU governors: ondemandplus (more info), interactive (default), ondemand, powersave, performance
ondemandplus is an ondemand- and interactive-based governor that has additional power-saving capabilities while maintaining very snappy performance.
ARM CPU topology: multi-core scheduling (enabled by default; saves battery by scheduling load among the CPU cores; more info)
temperature control
GPU & Display:
GPU frequency control: 307, 384 (default), 512 MHz
color, contrast and gamma contols
sane and natural looking color settings
I/O & memory:
F2FS support
ASRAM memory reclaim, giving you 744mb available RAM with a fully functional device
I/O schedulers: SIOplus (default), deadline, noop, row, bfqv5, cfq
updated HSMMC & OMAP4 NAND drivers (improve disk performance)
tuned LPDDR RAM timings (+10% throughput; more info)
optimized ext4 mountings
Android 3.4 low memory killer
ultra kernel samepage merging (UKSM; enabled by default)
fsync toggle
zRAM from 3.7 kernel (with fast LZ4 compression)
improved memory handling routines (memset, memzero, ...)
switch to disable the MMC CRC checking (more info)
Network:
TCP congestion control algorithms: westwood (default), cubic, reno
DTIM skip override (what it is and how it works)
Misc:
custom voltage control
timer slack feature (what does it do?)
fast charge
vibration strength control
sound control (high performance sound, volume boost)
battery life extender (BLX)
various performance and battery life tweaks
init.d support (no matter if the ROM supports it or not)
elevated systemui priority
module support (for slide2wake / PGM, e.g.)
more things... go check the source if you're interested.
compiled with Google GCC 4.7 toolchain (from Android NDK r9)
optional anykernel2 package by osm0sis for Android 4.3 and 4.2 compatibilty
Download links:
Major release for Android 4.2/4.3/4.4 (latest version: r60)
Release post: click here
IMPORTANT: Please read this post to find out which of the two files (fixed RAMdisk or anykernel2) you need!
Android 4.4 (fixed RAMdisk) Mirror #1: boypetersen.de
Android 4.4 (fixed RAMdisk) Mirror #2: mediafire.com
md5sum: 6b97f24357137d91768ad8c4d245e894
Android 4.2 / 4.3 / 4.4 (anykernel2) Mirror #1: boypetersen.de
Android 4.2 / 4.3 / 4.4 (anykernel2) Mirror #2: mediafire.com
md5sum: 0927620e85648bb98f910ac95e9bc74b
__________________________________________________
Older versions
boypetersen.de
__________________________________________________
Notes:
Compatible to:
all Galaxy Nexus devices (maguro, toro, toroplus)
all Android 4.2, 4.3, 4.4 based ROMs
both EXT4 and F2FS filesystems
Installation:
Flash the provided zip file with TWRP or CWM. If you're in doubt which file (fixed RAMdisk or anykernel2) is the right one for you, read this post
Having problems? Please give informative feedback, so that I or other users can understand what exactly is wrong and under which circumstances.
Changelog:
r59 >> r60
cpufreq: ondemandplus: adaptive timer_rate improvements (fixed some code of which I long knew it wasn't that good. The governor feels a little more responsive now)
tuna: very slightly relax ram timings (few users reported some instabilities which have been fixed by this)
reenable HDMI mirroring on GNexus portrait dock
ramdisk: replace new charger binary with previous one (-> charging percentage display works again)
ramdisk: retry moving systemui to parent task group 10 times (may help with the issue it stays in the "apps" group, as someone reported)
Click for full change log
Knowledge-base:
Most settings can be controlled with kernel settings apps. Trickster MOD fully supports fancy kernel. With it you can control:
CPU min frequency
CPU max frequency
CPU max screen-off frequency
CPU min screen-on frequency
GPU frequency
CPU governor
CPU governor tunables
I/O scheduler
read-ahead buffer
TCP congestion algorithm
CPU multi-core scheduling
fast charge
sound control
battery life extender
fsync
vibration strength
custom voltage
temperature control
color, contrast, gamma, content-adaptive brightness
zRAM
ondemandplus basics and tunables
ARM CPU topology: multi-core scheduling explained ('Multi core power saving' in Trickster MOD)
launcher white list to make your launcher 'unkillable'. Also: How to disable the white list
WiFi: DTIM skip override
LPDDR RAM timings tuning
timer slack feature: what does it do?
frandom: why it is not included in this kernel
init.d: how to use it
MMC CRC control: what it does and how to use it
Chit-chat:
What ROM / computer OS am I running?
People ask me this sometimes. On my Galaxy Nexus, I'm running Cyanogenmod 11 Nightlies and obviously Fancy Kernel. On my home PC (my Android build environment), I'm running Ubuntu 13.10.
Why did I name it 'fancy kernel'?
Because I do not want to use some random fancy name, but somehow have to give the kernel a name that is easily remembered. So after some self-irony involvement, I picked this ****ty name :>
What is so special about this kernel?
It offers superb battery life with a smooth and stable user experience. I am aware that all kernels claim that. Just try, see for yourself and report back. Innovations of this kernel are e.g. the screen-on min frequency setting, the ondemandplus governor and the SIOplus scheduler, since I implemented them myself. Also, I wanted many other improvements that exist across the several great kernels around XDA. After all, this kernel is based on other people's work for like 95 percent (like most kernels are).
Why did I build this Kernel initially?
Well that's rather easily answered. I used to use Franco kernel (which I really liked), but I wanted a kernel for myself which fits exactly to my needs. In particular, I especially wanted working hotplug, GPU OC controls, the option to set a minimum screen-on frequency and several hardcoded settings.
Oh, and yes: I built the kernel because I had fun doing so. But be not mistaken that I am a 'playaround kid': I dislike pulling in every little mod someone made. What I want is stability.
After some time I realized hotplugging would not be stable. After that I wrote the ondemandplus governor to save battery.
Why did I release it if I built it for myself?
I did not plan to release it at first. But I decided to release it since there was this one new feature (as named before: the screen-on min frequency control). I thought 'maybe it can contribute to others as well.' Also, maybe people like my compilation. Sharing is caring :>
Announcement:
The thread now has more than 1.000.000 hits! This is awesome, thank you for your interest!
Credits for code: Cyanogenmod, Google, kernel.org, Texas Instruments
bsmitty83, edoko, Ezekeel, faux123, franciscofranco, gokhanmoral, gwindlord, Huexxx, imoseyon, mpokwsths, osm0sis & Franco Dev Team, TeamHorizon
Credits for the Fancy Updater app: Parthipan Ramesh
Credits for the logo/artwork: DaNi_!
Source (including defconfig and RAMDISK): https://github.com/boype/kernel_tuna_kk44
A shout-out to the donators who help me pay the file hosting and buy me beer: 1haumann1, aaamador, agritux (2x), akaria, Bastian L., bigknowz, Blackcrx, creeve4, Fabio A., Ferhat Uğur C., James F., jsage, kuyam, Lancez, mpokwsths, n2rjt, nailz420 (2x), okanb3, omid900, rcozzi, Taomyn, teleplasma
Do you like my work? Hit 'thanks' and/or rate this thread with 5 stars.
Has my work improved your user experience? Consider a small donation.
Please do not PM me with questions, post in the thread instead.
XDA:DevDB Information
[KERNEL] Fancy Kernel r60 [Android JB+KK] [F2FS/EXT4] [Linux 3.0.101+] [OCT-24-2014], Kernel for the Samsung Galaxy Nexus
Contributors
boype
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r60
Stable Release Date: 2014-10-24
Created 2014-10-12
Last Updated 2014-10-24
downloading now , will share results in a few charges !
I usually stick with a couple certain kernels, because every time I try one outside of my 'safe' kernels, they don't play nice with my device.
I've decided to give this kernel a chance, mainly because it's new and I have the day off to test it out.
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Who knowz m not becoming a part of a great thread in the future..lets try this out
Sent from my Galaxy Nexus using xda premium
Trying this kernel for 2 days.
I can say, wonderful work.
Thanks boype!
Running it now at 192/1420 with 537 as max screen off. Pegasusq and bfq. GPU = 384 and SR remains on.
Can't tell how battery life is, as I just installed it. Charging phone back to 100 right now.
It is very smooth and responsive from what I've done so far though. Going to keep with this kernel for a couple days, see how it compares to my fall back, LeanKernel + Tweaks. So far, so good though.
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
anybody test NFS17 game on this kernel?
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Wow, sound great
So, Can i flash it over stock 4.2.1 ?
thebogy said:
Wow, sound great
So, Can i flash it over stock 4.2.1 ?
Click to expand...
Click to collapse
As long as you are rooted, I don't see why you wouldn't be able to. I'm pretty sure being rooted is all you need to flash a kernel.
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
great kernel ！
keep it:thumbup:
Sent from my Galaxy Nexus using xda premium
pgm support?
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
yes.
Sent from my Galaxy Nexus using xda premium
I'll give it a try but won't stick with it until an Stable release of CM10.1 is available, because I'm updating at every 3 nightlies and this kernel with an stable release of CM10.1 should be a monster. (and obviously I don't want to reflash it every new nightly.)
I liked it! I hope for further development of this kernel! Good luck! :good:
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
I would be regularly sharing my experience about this kernel..really smooth undoubtedly.. Just had first SoD..
Sent from my Galaxy Nexus using xda premium
try it now :good:
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
dratif said:
I would be regularly sharing my experience about this kernel..really smooth undoubtedly.. Just had first SoD..
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
On which governor? Default settings? Did you UV? Some more info please
Verstuurd van mijn Galaxy Nexus met Tapatalk
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Hy
I want to try this new kernel,
But i dont see volume boost in the features list, it's just missing in changelog, or no volume boost inside ?
Thanks
Sent from my Galaxy Nexus using xda premium
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Just flashed this kernel. The speed seems to be really great! I hope the battery life is equal to this
Verstuurd van mijn Galaxy Nexus met Tapatalk
dratif said:
I would be regularly sharing my experience about this kernel..really smooth undoubtedly.. Just had first SoD..
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Overclocked CPU or GPU? If yes, I need to increase voltages.
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Maguro thread
Here's the Golden Kernel, a modified version of Amperific's A.S.K.P and boype's Fancy. The concept is always to have a hybrid kernel, optimized for galaxy nexus,
in this way there is no more indecision about which kernel flash because this Golden is an all-in-one. This kernel also includes many features of the latest versions of the linux kernel (3.4/3.8+)
A slim, fast and smooth kernel for enjoying your phone.
Well, let's go into serious business
Kernel features
1.0/1.2
Linux Kernel 3.0.88
Linaro optimized
Fast charge enabled
Proportional Rate Reduction for TCP
Updated LowMemoryKiller driver (directly from 3.9 experimental kernel)
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
Make zRam LZ4 decompressor work faster in the same CPU cycles
Introduce Dynamic Cache Pressure (now you need the correct binary to compile this kernel)
Revise Dynamic Writeback algorithm
Deep Sleep tweaks
Introduce Timer Slack Controller
Dynamic PLL Overclock
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
CFS kernel scheduler optimization
Predefine minfree and adj values
Latest Generic Hotplug Helper from 3.10
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Tuned SmartassH3 to make more use of low frequencies (it's always recommended "Golden gov")
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
Writeback tweaked to do the work only when the screen is off
New Golden Governor (what Golden governor does)
Linked boostpulse interface to this governor
GPU optimizations
Frame buffer member of project butter
More deep sleap tweaks
New LMK machine
Introduce Dynamic Cache Pressure
updated HSMMC driver
RM CPU topology: multi-core scheduling
PGM support (still experimental, the dev of PGM app should add this kernel into his working list)
battery life extender (BLX)
custom voltage control
init.d support
selected patches from Google
TCP congestion control algorithms: westwood (default), cubic, reno
compiled with Google GCC 4.7 toolchain
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Optimized ext4 mount options
307MHz to 512MHz GPU as indicated in filename
Offering lowered voltages
Sound Control with PureAudio values (yeah man, rock your world)
SAS controller
Fixed wifi! (In 4.2.2 version and 4.3)
Updated LZ4 compression from 3.8 drivers
Finetuned Golden governor
Better performances, better battery life
TouchSense+ linked from touchscreen drivers
Gamma control with external module (only in 4.2.2 version)
System lagfixes
Frequencies revisited with entropy control
PGM support
Elevated SystemUI priority
Temperature control
zRam module updated from 3.10 kernel
Dynamic predefine Undervolt
GPU code Improvements
LZ4 references to /kernel folder
SpeedUp Boost
BuiltIn module for WLAN thanks to amperific
Finetuned Westwood TC Protocol
ION Memory Allocator backported from 3.10 kernel
LMK Plus machine ported from 2.3.6.39 kernel (even if it's an old version, it's the most fastest on the market)
Removed Google Snappy
zsmalloc updated into Golden Governor
Finetuned SioPlus shed
Updated ROW I/O from 3.10 kernel
1.3/1.6
Bug fixes, stable relase
New GoldenX governor
Added GoldenX GPU control
Fixed freq
Kernel Samepage Merging enabled by default
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Fixed the Deep Sleep states verification for scaling
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Added LowBattery Powersave feature for goldenX and interactive governors
ROW I/O algorithm revisited from 3.10 kernel
ISIX ROW interface for more stability
New experimental "Zen" sheduler
Re-switched to Linux Kernel 3.0.89
Improved touch drivers
New Golden I/O Scheduler (what golden sheduler does)
Fast latency algorithm
Smart screen wakeclock
RCU boost and systicl tweaks (now your phone should work like butter)
BLD (Battery Low Drain)
Wakelock tweaks for WLAN and LTE modem from 3.8 kernel
User voltage control
Backport interactive patches to interactiveX of 3.4 kernel
Lot of logging disabled (fastest phone boot time)
Updated GPU Drivers for more smoothness
New GoldenX2 governor
Better freq. scaling
BLS (Battery life saver) when the battery is on >5%
Updated idle parameters
Finetuned entropy boost
Finetuned C4 queue
VM, Filesystem, and other governor tweaks
Updated Hybla and Illinois TCP Congestion
Dynamic Readahead
Low Memory Killer from 3.10 Kernel
Sysctl Vm Optimizations at boot
Fastcharge control
DTIM skip override (what DTIM does)
Revisited Golden I/O Scheduler and updated its driver to 3.10 kernel
Fixed all freq. scaling on 3.4 kernel
Added power.tuna.so into the 4.3 kernel's zip
Tweaked GoldenX2 governor (for now the best Golden Gov. than ever)
Revisited Hybla TCPC (with totally new values for ipv4 optimizations, probably I'll make a Golden TCP Congestion)
Revisited Westwood TCPC
Undervolt down to (0-1-2-3-6) (less battery drain with high frequencies)
RAB algorithm from experimental 3.11 kernel
Tweaked Golden I/O Scheduler (now with the fastest latency on the planet)
Updated BLX
Revisited PGM support, now It's all on the dev's hands
1.7
Linux Kernel 3.0.94
New Golden TCP Congestion
New .net buffer algorithm
Part of NetProjectX (developed by me, this is a set of tweaks for this kernel fully available from 2.0 version)
3g speedup (now the 3g is faster, but without consuming data traffic)
Backported i2c bus drivers from 3.11 experimental kernel and made them fully working
Revisited Reno TCPC with 3.8 kernel parameters
Sakis3g algorithm (theorical support for 3g USB keys)
Switched-off a lot of debugging (faster boot time)
New Injector system for the kernel .zip
Wi-Fi speedup with 3mbps download peak
New GoldenX3 governor
Sensitive workload algorithm from 3.9 kernel
New low battery profile (when the battery is <15)
New CpuProjectX undervolt (another 2.0 feature)
Code cleanups
1.8.3
Working 1.8 kernel (tested from more than 3 users here is one feedback)
Wifi fixed
4.4 CM official sources
Added support for Touch Control
New KitKat ramdisk directly from Fancy Kernel (now all should work)
First version of the "New Golden Kernel" [NGK]
Disabled ASRAM due gamma color problems (I'm working on it)
New GoldenKat TCPC, try this awesome stuff!
New GoldenUltimate governor with the new SMART Pro Scaling
New undervolt system up to 1-2-1-3-4
Powersave profile directly from "Conservative"
KK Ram management with HyperBoost2 (erase the useless ram every 30 min)
New GoldenKatIO sheduler: KitKat is optimized for 512MB of ram? Let's use our 1024MB!
Various small fixes from Linux Kernel 3.0.101
Ramdisk optimizations
Downloads
Wipe Dalvik and Cache partition before flashing this kernel
Android 4.4
Download 4.4 XXH10K3 - Latest
Android 4.3
Download 4.3 XXG09J - Latest
Download 4.3 XXE07J
Sources: https://github.com/Jeeko/golden_kernel_4.4
Nice work, more new stuff to play with.
Jeeko said:
This kernel is compatible with Android 4.2.x if you want a version for 4.3 just tell me
Click to expand...
Click to collapse
4.3 version please.
+1 for 4.3 kernel with PGM support
swyped from my maguro
1haumann1 said:
+1 for 4.3 kernel with PGM support
swyped from my maguro
Click to expand...
Click to collapse
+1 to this
Does this kernel has ION-enabled?
Thanks,
Rinse
Looks good. But need 4.3 one yes lol. 4.2.2 is so 2012 lol
grtz from the crazy basterd from holland. powered by pzosp/purity 4.3 and askp kernel
TheRinseM said:
Does this kernel has ION-enabled?
Thanks,
Rinse
Click to expand...
Click to collapse
Yes, It has ION memory allocator I have to plan the OP better
WIFI doesn't work for me. Can anyone confirm?
nailz420 said:
WIFI doesn't work for me. Can anyone confirm?
Click to expand...
Click to collapse
For the wi-fi I have to made a fixed module, stay tuned
nailz420 said:
WIFI doesn't work for me. Can anyone confirm?
Click to expand...
Click to collapse
Jeeko said:
For the wi-fi I have to made a fixed module, stay tuned
Click to expand...
Click to collapse
I can confirm. WIFI module broken. Waiting for fix
would love to see a 4.3 version !!
Ok guys, here's the 4.3 verison
http://d-h.st/UkJ
Enjoy
Jeeko said:
Ok guys, here's the 4.3 verison
http://d-h.st/UkJ
Enjoy
Click to expand...
Click to collapse
Wi-Fi works?
swyped from my maguro
1haumann1 said:
Wi-Fi works?
swyped from my maguro
Click to expand...
Click to collapse
Just tested on CM10.2, nope, wait for the module
1haumann1 said:
Wi-Fi works?
swyped from my maguro
Click to expand...
Click to collapse
Mhh, I don't think
Jeeko said:
Yes, It has ION memory allocator I have to plan the OP better
Click to expand...
Click to collapse
Awh yeah! Can i use this as my HTC sense 5.0 base ?
Thanks in advance! Cool kernel!
Looks promising.... Waiting for the WiFi module fix to try out.
Sent from my Galaxy Nexus using xda app-developers app
Other than Wifi, the golden governor is really smooth. Smoother than interactive. I like. :good:
TheRinseM said:
Awh yeah! Can i use this as my HTC sense 5.0 base ?
Thanks in advance! Cool kernel!
Click to expand...
Click to collapse
Sure
For the wi-fi fixing I'm looking for a solution, I hope I'll fix it asap
When you have fix, ill start using it!
Sent from my HTC Desire HD using Tapatalk 4 Beta
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Toroplus thread
Here's the Golden Kernel, a modified version of Amperific's A.S.K.P and boype's Fancy. The concept is always to have a hybrid kernel, optimized for galaxy nexus,
in this way there is no more indecision about which kernel flash because this Golden is an all-in-one. This kernel also includes many features of the latest versions of the linux kernel (3.4/3.8+)
A slim, fast and smooth kernel for enjoying your phone.
Well, let's go into serious business
Kernel features
1.0/1.2
Linux Kernel 3.0.88
Linaro optimized
Fast charge enabled
Proportional Rate Reduction for TCP
Updated LowMemoryKiller driver (directly from 3.9 experimental kernel)
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
Make zRam LZ4 decompressor work faster in the same CPU cycles
Introduce Dynamic Cache Pressure (now you need the correct binary to compile this kernel)
Revise Dynamic Writeback algorithm
Deep Sleep tweaks
Introduce Timer Slack Controller
Dynamic PLL Overclock
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
CFS kernel scheduler optimization
Predefine minfree and adj values
Latest Generic Hotplug Helper from 3.10
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Tuned SmartassH3 to make more use of low frequencies (it's always recommended "Golden gov")
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
Writeback tweaked to do the work only when the screen is off
New Golden Governor (what Golden governor does)
Linked boostpulse interface to this governor
GPU optimizations
Frame buffer member of project butter
More deep sleap tweaks
New LMK machine
Introduce Dynamic Cache Pressure
updated HSMMC driver
RM CPU topology: multi-core scheduling
PGM support (still experimental, the dev of PGM app should add this kernel into his working list)
battery life extender (BLX)
custom voltage control
init.d support
selected patches from Google
TCP congestion control algorithms: westwood (default), cubic, reno
compiled with Google GCC 4.7 toolchain
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Optimized ext4 mount options
307MHz to 512MHz GPU as indicated in filename
Offering lowered voltages
Sound Control with PureAudio values (yeah man, rock your world)
SAS controller
Fixed wifi! (In 4.2.2 version and 4.3)
Updated LZ4 compression from 3.8 drivers
Finetuned Golden governor
Better performances, better battery life
TouchSense+ linked from touchscreen drivers
Gamma control with external module (only in 4.2.2 version)
System lagfixes
Frequencies revisited with entropy control
PGM support
Elevated SystemUI priority
Temperature control
zRam module updated from 3.10 kernel
Dynamic predefine Undervolt
GPU code Improvements
LZ4 references to /kernel folder
SpeedUp Boost
BuiltIn module for WLAN thanks to amperific
Finetuned Westwood TC Protocol
ION Memory Allocator backported from 3.10 kernel
LMK Plus machine ported from 2.3.6.39 kernel (even if it's an old version, it's the most fastest on the market)
Removed Google Snappy
zsmalloc updated into Golden Governor
Finetuned SioPlus shed
Updated ROW I/O from 3.10 kernel
1.3/1.6
Bug fixes, stable relase
New GoldenX governor
Added GoldenX GPU control
Fixed freq
Kernel Samepage Merging enabled by default
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Fixed the Deep Sleep states verification for scaling
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Added LowBattery Powersave feature for goldenX and interactive governors
ROW I/O algorithm revisited from 3.10 kernel
ISIX ROW interface for more stability
New experimental "Zen" sheduler
Re-switched to Linux Kernel 3.0.89
Improved touch drivers
New Golden I/O Scheduler (what golden sheduler does)
Fast latency algorithm
Smart screen wakeclock
RCU boost and systicl tweaks (now your phone should work like butter)
BLD (Battery Low Drain)
Wakelock tweaks for WLAN and LTE modem from 3.8 kernel
User voltage control
Backport interactive patches to interactiveX of 3.4 kernel
Lot of logging disabled (fastest phone boot time)
Updated GPU Drivers for more smoothness
New GoldenX2 governor
Better freq. scaling
BLS (Battery life saver) when the battery is on >5%
Updated idle parameters
Finetuned entropy boost
Finetuned C4 queue
VM, Filesystem, and other governor tweaks
Updated Hybla and Illinois TCP Congestion
Dynamic Readahead
Low Memory Killer from 3.10 Kernel
Sysctl Vm Optimizations at boot
Fastcharge control
DTIM skip override (what DTIM does)
Revisited Golden I/O Scheduler and updated its driver to 3.10 kernel
Fixed all freq. scaling on 3.4 kernel
Added power.tuna.so into the 4.3 kernel's zip
Tweaked GoldenX2 governor (for now the best Golden Gov. than ever)
Revisited Hybla TCPC (with totally new values for ipv4 optimizations, probably I'll make a Golden TCP Congestion)
Revisited Westwood TCPC
Undervolt down to (0-1-2-3-6) (less battery drain with high frequencies)
RAB algorithm from experimental 3.11 kernel
Tweaked Golden I/O Scheduler (now with the fastest latency on the planet)
Updated BLX
Revisited PGM support, now It's all on the dev's hands
1.7
Linux Kernel 3.0.94
New Golden TCP Congestion
New .net buffer algorithm
Part of NetProjectX (developed by me, this is a set of tweaks for this kernel fully available from 2.0 version)
3g speedup (now the 3g is faster, but without consuming data traffic)
Backported i2c bus drivers from 3.11 experimental kernel and made them fully working
Revisited Reno TCPC with 3.8 kernel parameters
Sakis3g algorithm (theorical support for 3g USB keys)
Switched-off a lot of debugging (faster boot time)
New Injector system for the kernel .zip
Wi-Fi speedup with 3mbps download peak
New GoldenX3 governor
Sensitive workload algorithm from 3.9 kernel
New low battery profile (when the battery is <15)
New CpuProjectX undervolt (another 2.0 feature)
Code cleanups
Downloads
Wipe Dalvik and Cache partition before flashing this kernel
Android 4.2.x
Download Milestone XXG09 - Latest
Download Milestone XXF08
Android 4.3
Download 4.3 XXG09J - Latest
Download 4.3 XXE07J
Sources: https://github.com/Jeeko/Golden_Kernel_4.3
Dling now! Thanks!
Sent from my Galaxy Nexus using xda premium
RSVP..
Thank you
My Almighty Nexus powered by MMuzzy's Vanilla extract 4.3 & ASKP kernel
Thanks for bringing this over!
Sent from my Galaxy Nexus using xda app-developers app
Been running this kernel and also beta test and excellent battery life phone is much snappier
Sent from my Galaxy Nexus using xda app-developers app
Awesome!! Thanks for this. We need more new kernels.
Sent from my Galaxy Nexus using Tapatalk 4
Anyone getting good battery life? I try sioplus with golden governer n drain my battery fast
Sent from my Galaxy Nexus using xda app-developers app
trying this out now.
Thanks. :good:
Ok ladies and gentleman, new version, new GoldenX governor, new TouchBoost interface. Probably the first tuna kernel to have the ISIX ROW features, but I can't say you all, check the changelogs The most stable relase for now.
Enjoy
For the 1.4 version I'm planning a reduction of radio frequency (less radiation, more health)
But it is not all... stay tuned!
downloading 1.3 now. 1.2 was working really well for me.
Jeeko said:
Ok ladies and gentleman, new version, new GoldenX governor, new TouchBoost interface. Probably the first tuna kernel to have the ISIX ROW features, but I can't say you all, check the changelogs The most stable relase for now.
Enjoy
For the 1.4 version I'm planning a reduction of radio frequency (less radiation, more health)
But it is not all... stay tuned!
Click to expand...
Click to collapse
but but but I like glowing in the dark. :laugh:
For now this is going yo be my daily feels snappier then anything I tried and don't need and mods like cross breeder to make it fast! Will report back on battery in a few days!
Sent from my Galaxy Nexus using Tapatalk 2
Phone won't go into deep sleep. Stuck at 384.
Sent from my Galaxy Nexus using xda app-developers app
jeffreynothing43 said:
Phone won't go into deep sleep. Stuck at 384.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hit thanks button by accident. Use better battery stats to find your rogue app. I HIGHLY doubt its a kernel issue. Deep sleep is just fine here.
Sent from my Galaxy Nexus using Tapatalk 4
tommy0823 said:
Hit thanks button by accident. Use better battery stats to find your rogue app. I HIGHLY doubt its a kernel issue. Deep sleep is just fine here.
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
+1
Sent from my Galaxy Nexus using Tapatalk 2
Ok guys... new Golden Kernel means new Golden I/O Scheduler (I'm planning the wiki) now your phone should run like butter /Wipe chache e Data, always!!
Enjoy
Well, new update (1.5) with this new version I have introduced the new GoldenX2 governor: a GoldenX governor less aggressive, so more battery friendly but more fast, smooth and clean. A lot of news, read the changelog
Enjoy!
P.S. Wifi or 3g network? Now there aren't more differences
Here's all! The 1.6 version should be a major update but let's see the new higlight features like a totally new Hybla TCP Congestion, or the new Undervolt (enjoy high freqs with low battery drain).
Enjoy also the GoldenX2 gov and Golden I/O both tweaked for the better experience on the planet
For more info ceck the changelogs
CWM said the zip isn't signed when attempting to flash.
My Almighty Galaxy Nexus powered by PA 3.68 & ASKP kernel
info[]box1 said:
CWM said the zip isn't signed when attempting to flash.
My Almighty Galaxy Nexus powered by PA 3.68 & ASKP kernel
Click to expand...
Click to collapse
Flashed perfectly with twrp man. Maybe a bad DL?
Sent from my Galaxy Nexus using cm10.2 unofficial 4.3 golden kernel and Tapatalk 2
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Toro thread
Here's the Golden Kernel, a modified version of Amperific's A.S.K.P and boype's Fancy. The concept is always to have a hybrid kernel, optimized for galaxy nexus,
in this way there is no more indecision about which kernel flash because this Golden is an all-in-one. This kernel also includes many features of the latest versions of the linux kernel (3.4/3.8+)
A slim, fast and smooth kernel for enjoying your phone.
Well, let's go into serious business
Kernel features
1.0/1.2
Linux Kernel 3.0.88
Linaro optimized
Fast charge enabled
Proportional Rate Reduction for TCP
Updated LowMemoryKiller driver (directly from 3.9 experimental kernel)
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
Make zRam LZ4 decompressor work faster in the same CPU cycles
Introduce Dynamic Cache Pressure (now you need the correct binary to compile this kernel)
Revise Dynamic Writeback algorithm
Deep Sleep tweaks
Introduce Timer Slack Controller
Dynamic PLL Overclock
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
CFS kernel scheduler optimization
Predefine minfree and adj values
Latest Generic Hotplug Helper from 3.10
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Tuned SmartassH3 to make more use of low frequencies (it's always recommended "Golden gov")
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
Writeback tweaked to do the work only when the screen is off
New Golden Governor (what Golden governor does)
Linked boostpulse interface to this governor
GPU optimizations
Frame buffer member of project butter
More deep sleap tweaks
New LMK machine
Introduce Dynamic Cache Pressure
updated HSMMC driver
RM CPU topology: multi-core scheduling
PGM support (still experimental, the dev of PGM app should add this kernel into his working list)
battery life extender (BLX)
custom voltage control
init.d support
selected patches from Google
TCP congestion control algorithms: westwood (default), cubic, reno
compiled with Google GCC 4.7 toolchain
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Optimized ext4 mount options
307MHz to 512MHz GPU as indicated in filename
Offering lowered voltages
Sound Control with PureAudio values (yeah man, rock your world)
SAS controller
Fixed wifi! (In 4.2.2 version and 4.3)
Updated LZ4 compression from 3.8 drivers
Finetuned Golden governor
Better performances, better battery life
TouchSense+ linked from touchscreen drivers
Gamma control with external module (only in 4.2.2 version)
System lagfixes
Frequencies revisited with entropy control
PGM support
Elevated SystemUI priority
Temperature control
zRam module updated from 3.10 kernel
Dynamic predefine Undervolt
GPU code Improvements
LZ4 references to /kernel folder
SpeedUp Boost
BuiltIn module for WLAN thanks to amperific
Finetuned Westwood TC Protocol
ION Memory Allocator backported from 3.10 kernel
LMK Plus machine ported from 2.3.6.39 kernel (even if it's an old version, it's the most fastest on the market)
Removed Google Snappy
zsmalloc updated into Golden Governor
Finetuned SioPlus shed
Updated ROW I/O from 3.10 kernel
1.3/1.6
Bug fixes, stable relase
New GoldenX governor
Added GoldenX GPU control
Fixed freq
Kernel Samepage Merging enabled by default
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Fixed the Deep Sleep states verification for scaling
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Added LowBattery Powersave feature for goldenX and interactive governors
ROW I/O algorithm revisited from 3.10 kernel
ISIX ROW interface for more stability
New experimental "Zen" sheduler
Re-switched to Linux Kernel 3.0.89
Improved touch drivers
New Golden I/O Scheduler (what golden sheduler does)
Fast latency algorithm
Smart screen wakeclock
RCU boost and systicl tweaks (now your phone should work like butter)
BLD (Battery Low Drain)
Wakelock tweaks for WLAN and LTE modem from 3.8 kernel
User voltage control
Backport interactive patches to interactiveX of 3.4 kernel
Lot of logging disabled (fastest phone boot time)
Updated GPU Drivers for more smoothness
New GoldenX2 governor
Better freq. scaling
BLS (Battery life saver) when the battery is on >5%
Updated idle parameters
Finetuned entropy boost
Finetuned C4 queue
VM, Filesystem, and other governor tweaks
Updated Hybla and Illinois TCP Congestion
Dynamic Readahead
Low Memory Killer from 3.10 Kernel
Sysctl Vm Optimizations at boot
Fastcharge control
DTIM skip override (what DTIM does)
Revisited Golden I/O Scheduler and updated its driver to 3.10 kernel
Fixed all freq. scaling on 3.4 kernel
Added power.tuna.so into the 4.3 kernel's zip
Tweaked GoldenX2 governor (for now the best Golden Gov. than ever)
Revisited Hybla TCPC (with totally new values for ipv4 optimizations, probably I'll make a Golden TCP Congestion)
Revisited Westwood TCPC
Undervolt down to (0-1-2-3-6) (less battery drain with high frequencies)
RAB algorithm from experimental 3.11 kernel
Tweaked Golden I/O Scheduler (now with the fastest latency on the planet)
Updated BLX
Revisited PGM support, now It's all on the dev's hands
1.7
Linux Kernel 3.0.94
New Golden TCP Congestion
New .net buffer algorithm
Part of NetProjectX (developed by me, this is a set of tweaks for this kernel fully available from 2.0 version)
3g speedup (now the 3g is faster, but without consuming data traffic)
Backported i2c bus drivers from 3.11 experimental kernel and made them fully working
Revisited Reno TCPC with 3.8 kernel parameters
Sakis3g algorithm (theorical support for 3g USB keys)
Switched-off a lot of debugging (faster boot time)
New Injector system for the kernel .zip
Wi-Fi speedup with 3mbps download peak
New GoldenX3 governor
Sensitive workload algorithm from 3.9 kernel
New low battery profile (when the battery is <15)
New CpuProjectX undervolt (another 2.0 feature)
Code cleanups
Downloads
Wipe Dalvik and Cache partition before flashing this kernel
Android 4.2.x
Download Milestone XXG09 - Latest
Download Milestone XXF08
Android 4.3
Download 4.3 XXG09J - Latest
Download 4.3 XXE07J
Sources: https://github.com/Jeeko/Golden_Kernel_4.3
Nice. I'll try it out.
Giving this a spin. Plays nice with root on 4.3. Good Start!
toro, toro!
Trying this out on 4.2, thanks.
WHATCHOO TALKING BOUT WILLIS?
Just found this beast.. Flashing now!! Thanks
Sent from my Galaxy Nexus using Tapatalk 4
This... This kernel right here makes the Galaxy Nexus perform the way it should be. GoldenX governor just makes this phone run sooo responsive and sooo fluid.
Just Pure...
Ok guys... new Golden Kernel means new Golden I/O Scheduler (I'm planning the wiki) now your phone should run like butter /Wipe chache e Data, always!!
Enjoy
Ermaferkonguard!!!!! Butter got nothing on this. Its like......Heavens butter...PERFECTION. omg
Sent from my Galaxy Nexus using xda premium
This kernel is great ty been running it for a day or so so smooth
Sent from my Galaxy Nexus using xda premium
I f'ing love this kernel!!! Running golden setting on both the governor and I/O scheduler. Coupled with 4.3, my gnex has never been so smooth, wow!
toro, toro!
What setting for better battery life
This kernel has been giving me better battery life than lean. Keep up the good work. I was running default and then changed to powersave for even more savings
Sent from my Galaxy Nexus using Tapatalk 4
What's a good setting for balance?
Sent from my Galaxy Nexus using Tapatalk 4
Just flashed this and so far its amazing!!! It deleted tapatalk and Pandora for some reason but I just reinstalled as it was no big deal just kinda weird. As of now it looks like I'll be using this for a while I'll report back in the next day or two and say how everything worked out. Thanks for making and posting this wonderful kernel!!! ^_^
Sent from my Galaxy Nexus using Tapatalk 2
OP reports that this is built with GCC 4.7. But TricksterMod is reporting 4.6.2, which has a date of 2011. Is that just a name thing? Or is 4.7 the same as 4.6.2? And why use a version from 2011?
Sounds like a good deal. I'll be flashing it tonight
Thank you for your feedback, I apreciate
christianpeso said:
OP reports that this is built with GCC 4.7. But TricksterMod is reporting 4.6.2, which has a date of 2011. Is that just a name thing? Or is 4.7 the same as 4.6.2? And why use a version from 2011?
Click to expand...
Click to collapse
I use only the arm-eabi folder of GCC 4.7, the other folders come from toolchain 4.6.2 here's the why
Does dropping the voltages down .50 actually help? I saw someone say that before but on a different kernel
Sent from my Galaxy Nexus using Tapatalk 2
I'm not one that typically sees much of a difference in kernels... This one is top notch. Major smoothville here! Great job!
Sent from my Galaxy Nexus using Tapatalk 2
Anyone get pgm working on this?
toro, toro!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Status: STABLE
COLONEL-X(B) FEATURES:
GENERAL:
N900TUVUDNF4 Base
Linux Kernel Updates: 3.4.103
Linaro 4.9.1
SELinux: Permissive
Built with NEON VFP optimization flags
File Systems: exFAT, FAT, NFS, NTFS, F2FS
SWAP: swap, frontswap, zswap, znswap
USB Mass Storage
XZ Compression
xConfig (Inspired by Imoseyon's lkconfig)
Google's Snappy Compression/Decompression Library
Vmalloc Savings
Click to expand...
Click to collapse
EXTRAS:
Synapse - AndreiF & apbaxel
USB FastCharge - yank555-lu
MDNIE Lite Controls - yank555-lu
LED Extended Controls - yank555-lu
Battery Life Extender (BLX) - Ezekeel
MSM-Hotplug - myfluxi
Intelliplug - faux123
Faux Sound - faux123
Bricked MPDecision - show1984
KThermal - Ktoonsez
Click to expand...
Click to collapse
GOVERNORS & SCHEDULERS, ETC:
Overclocked: 2.8GHz
OC'd L2 and Bus Bandwidth
Custom Voltage Table - Imoseyon
Voltage Minimum: 600mv
CPU Hardlimit 2.0 (Yank555)
Conservative
InteractiveX - Imoseyon
BFQ Scheduler - ayysir
FIOPS Scheduler - Doomlord
SIO Scheduler - Doomlord
VR Scheduler
ZEN Scheduler - Brandon Berhent (No username)
Simple GPU Gov - faux123
Disabled Userspace Governor
Click to expand...
Click to collapse
ColonelX(B) R24 Changelog
Code:
Rebased on Kitkat Build NF9
Thermal: Add Intellithermal V2
Thermal: Removed KThermal
Driver: Add Sweep2Wake and Sweep2Sleep
CPUFreq: Some changes to Smartmax
Driver: Add Custom Vibration tool
Version: R24 ColonelX | ColonelXB
Download: Old Builds
Source (Updated on Stable releases)
XDA:DevDB Information
ColonelX, Kernel for the T-Mobile Samsung Galaxy Note 3
Contributors
itsmikeramsay, itsmikeramsay
Kernel Special Features: Listed above
Version Information
Status: Stable
Current Stable Version: R24
Stable Release Date: 2014-09-19
Beta Release Date: 2014-04-09
Created 2013-11-23
Last Updated 2014-09-25
[KERNEL][AOSP][N900X] | ColonelAX R11 | 3GHz | 3.4.80 | Much More!! - 2|17|14
DISREGARD THIS POST, WIP FOR ColonelAX!!!
Kernel Status: BETA
COLONEL-AX FEATURES:
GENERAL:
Supports Unified Source by CyanogenMod
Linux Kernel Updates: 3.4.82
GCC 4.8.3
SELinux: Permissive
Built with NEON VFP optimization flags
File Systems: exFAT, FAT, NFS, NTFS
SWAP: swap, frontswap, zswap, znswap
USB Mass Storage
LZO Compression (Bigger file, but boots much faster)
Ultra Kernel Same-page Merging (UKSM) - jasmison904
xConfig (Inspired by Imoseyon's lkconfig)
Google's Snappy Compression/Decompression Library
Vmalloc Savings
Click to expand...
Click to collapse
EXTRAS:
USB FastCharge - yank555-lu
MDNIE Lite Controls - yank555-lu
LED Extended Controls - yank555-lu
TouchWake Finger/S-Pen - yank555-lu - Note1
Battery Life Extender (BLX) - Ezekeel
Bricked Mpdecision - show1978
FK Thermal - franciscofranco
Intelliplug - faux123
Intellithermal - faux123
Note1: Touchwake disables when you hit the power button to turn off display. YOU MUST let the screen timeout and turn off itself in order for touchwake to work for the set delay time you have configured!!
Click to expand...
Click to collapse
GOVERNORS & SCHEDULERS, ETC:
Overclocked: 3.01GHz (3GHz)
Underclocked: 96MHz
OC'd L2 and Bus Bandwidth
Custom Voltage Table - Imoseyon
Voltage Minimum: 600mv
ConservativeX
InteractiveX - Imoseyon
Intelliactive - faux123
Intellidemand - faux123
OndemandX - Imoseyon
OnDemandPLUS - boype
PegasusQ - ByungChang
Smartmax - maxwen
Smartmax_eps - maxwen
SmartassV2 - erasmux
WheatleyX - Based on Wheatley (Ezekeel)
BFQ Scheduler - ayysir
FIOPS Scheduler - Doomlord
SIO Scheduler - Doomlord
SIOPLUS Scheduler - boype
VR Scheduler
ZEN Scheduler - Brandon Berhent (No username)
Simple GPU Gov - faux123
Disabled Userspace & Powersave Governors
Click to expand...
Click to collapse
Colonel-AX R11 Changelog
Code:
Initial Release!!
Download: N900X - R11
And one for me...
Moved here since folks were requesting it...:good:
Running good
Sent from my DragonMOD-N9005 using xda premium
Thx
Sent from my SM-N900T using Tapatalk
Awesome
Sent from my SM-N900T
Great work
SM-N900T using xda app-developers app.
Liquor out front, poker in the back.
Woohoo 3GHz awesome!!! Plus its goodies of course. Testing now.
Only bug folks so far is benchmarking for some. It can lock up your phone till you reboot
itsmikeramsay said:
Only bug folks so far is benchmarking for some. It can lock up your phone till you reboot
Click to expand...
Click to collapse
Well not true because my phone won't handle 2.96GHz at all it crashes and it crashed as well as soon as I put it to 1202mV to try to make it stable.
Sent from my SM-N900T using xda app-developers app
XxLostSoulxX said:
Well not true because my phone won't handle 2.96GHz at all it crashes and it crashed as well as soon as I put it to 1202mV to try to make it stable.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Sucks to know bro. These chipsets are funny.
For those that can run 2.96GHz that was the only bug so far. Those that can't run it at all, that's something we'll look into and see if we can resolve. Some just can't male it there unfortunately.
itsmikeramsay said:
Sucks to know bro. These chipsets are funny.
For those that can run 2.96GHz that was the only bug so far. Those that can't run it at all, that's something we'll look into and see if we can resolve. Some just can't male it there unfortunately.
Click to expand...
Click to collapse
Edit to what i previously posted i guess it only happens as soon as i set the voltage to 1.2V otherwise its fine in-till benchmarking which means it just cant handle staying at those high speeds on all cores i assume?
XxLostSoulxX said:
Edit to what i previously posted i guess it only happens as soon as i set the voltage to 1.2V otherwise its fine in-till benchmarking which means it just cant handle staying at those high speeds on all cores i assume?
Click to expand...
Click to collapse
That's what I'm trying to figure out now lol. Seems like the case. Its me and DJ's first kernel so we're still learning stuff. Weird it works fine til benchmarking. Hopefully we find a solution real soon.
itsmikeramsay said:
That's what I'm trying to figure out now lol. Seems like the case. Its me and DJ's first kernel so we're still learning stuff. Weird it works fine til benchmarking. Hopefully we find a solution real soon.
Click to expand...
Click to collapse
yeah but the voltage is a problem too! that could be a factor that some phones cpu isn't as good. try setting your voltage to 1.2V for 3GHz and see if it crashes.
XxLostSoulxX said:
yeah but the voltage is a problem too! that could be a factor that some phones cpu isn't as good. try setting your voltage to 1.2V for 3GHz and see if it crashes.
Click to expand...
Click to collapse
Ok I'll test it out.
Running smooth as Buddha and snappy as hell!
Sent from my SM-N900T using Tapatalk
After a day of running it seems this kernel could be a battery killer. My battery when down much faster if I we r email to use lean kernel... hmm and yes I didn't over clock and my voltages were the ones included.
Sent from my DragonMOD-N9005 using xda premium
OPGT said:
After a day of running it seems this kernel could be a battery killer. My battery when down much faster if I we r email to use lean kernel... hmm and yes I didn't over clock and my voltages were the ones included.
Sent from my DragonMOD-N9005 using xda premium
Click to expand...
Click to collapse
What governor were you using? Amd youre on 9005 right?
I gotta figure out why some 9005 users are seeing battery drain. I'll check it out today.
Ok, here is what I have figured out. At least with my hardware anyway. I'm using the latest version of TricksterMod and this is what I can get. I can boot up @ 3ghz with my voltage at 1.2 ONLY if I set it manually to exactly that. 1.2. If I use the incremental voltage steps it puts me at 1215. No go. It locks up and reboots. But if I manually set it to 1.2 even, it boots, and I can run Quadrant to benchmark. I have been able to successfully apply all governers with a 2.956 clock and use 2 schedulers (row and zen, so far) Seems like anything over 1.2 volts and the max clock, it locks up and reboots. Being as though no two chips are the same, somebody may get a higher voltage/clock before lock up. Who knows. Anyway, it runs great so far. Haven't had a chance to test battery life. Will post that later. I upoaded a few screenshots of my benchmarks running these freqs/voltages. So far, great work guys! This can only get better from here :good: