Hello to evryone !
The last Archos update for Gen10 101XS ( 18/02/2013 ) : Android 4.1.2 Firmware 4.1.2 with Root access !
This Rom is based on unmodified Android system , Archos Firmware 4.1.2 !
This Rom can be installed only if you have already enabled SDE on your tablet .
Change log :
Archos applications: add Archos multimedia server back, update Archos Video, Music, File Manager, GamePad Mapping Tool to be in par with GooglePlay versions.
Google backup manager: make it work again
HDMI: avoid interference of CEC detected as DPAD with some games such as Max Payne
& also ...
increase data I/O
enabled init.d* to run scripts
Download :
please download from here all necessary files :
archos.ext4.update
zImage
initramfs.cpio.lzo
Archos_4.1.2.zip
Mirror :
Installation :
connect USB cable ;
unzip Archos_4.1.2.zip into Archos_4.1.2 directory
copy archos.ext4.update in your device, or > adb push archos.ext4.update /mnt/storage
go to recovery SDE and Remove android kernel if you have already installed any official firmware !
go to Flash kernel & Initramfs and copy here zImage and initramfs.cpio.lzo from ( Archos_4.1.2)
Ok ! ... & wait to boot !
Now you have rooted the last Archos Firmware 4.1.2 - Android 4.1.2 !!!
regards,
Surdu Petru
***reserved***
Hi! can i update without losing my data and settings?
.:Petunia:. said:
Hi! can i update without losing my data and settings?
Click to expand...
Click to collapse
Yes...
- during installation, only dalvik-cache will be wiped :good:
@dev.
would this rom work on my brand new archos 101 titanium ?
Br.
Michel
surdu_petru said:
Yes...
- during installation, only dalvik-cache will be wiped :good:
Click to expand...
Click to collapse
Thanks a lot!!!
thanks a lot! very useful.:good:
Impossible to install this rom
SDE ok
but Archos do not see the Initramfs
cajl said:
Impossible to install this rom
SDE ok
but Archos do not see the Initramfs
Click to expand...
Click to collapse
I have also had the problem. I also already had JB 4.1.1 on the 101 xs. You must go back to ICS. Then you can upgrade your Tablet with this rooted version.
Hi guys,
sorry but just out of curiosity....does this work on the archos Familypad 2?
any idea or suggestions are extremely appreciated.
Thanks
hi @surdu_petru, i've installed your Android 4.1.2 Firmware 4.1.2 with Root access ! (SDE was enabled)
The new firmware included the zImage, and initramfs.cpio.lzo was succesfull installed.
Sometimes Superuser hangs, and the error Superuser has ended was on the display.
I installed quickboot from Aptoide, and made a reboot, i confirmed superuser the process...superuser was closed..and now the Archos 101 XS never boot, it hangs on the bootlogo.
i can boot into sde, tried check the disk, it works, but on reboot ther is only the bootlogo.
Can you help me, thanks for all.
today i cleared all data, installed the firmware, removed the kernel, copied the zImage and initramfs.cpio.lzo, there was an error, initramfs not found ?
Rmaier14 said:
hi @surdu_petru, i've installed your Android 4.1.2 Firmware 4.1.2 with Root access ! (SDE was enabled)
The new firmware included the zImage, and initramfs.cpio.lzo was succesfull installed.
Sometimes Superuser hangs, and the error Superuser has ended was on the display.
I installed quickboot from Aptoide, and made a reboot, i confirmed superuser the process...superuser was closed..and now the Archos 101 XS never boot, it hangs on the bootlogo.
i can boot into sde, tried check the disk, it works, but on reboot ther is only the bootlogo.
Can you help me, thanks for all.
today i cleared all data, installed the firmware, removed the kernel, copied the zImage and initramfs.cpio.lzo, there was an error, initramfs not found ?
Click to expand...
Click to collapse
Downgrade to ICS first? i.e., what i did was:
Format from recovery SDE
Copy official ICS Firmware (file is firmware_archos_it4x.aos), reboot
Turn on USB debugging (not sure if this is necessary).
Then follow instructions in the first post.
Note, I did also do the following optional step from that post:
go to recovery SDE and Remove android kernel if you have already installed any official firmware!
Click to expand...
Click to collapse
Good luck and post back if this works.
KyleR2 said:
Downgrade to ICS first? i.e., what i did was:
Format from recovery SDE
Copy official ICS Firmware (file is firmware_archos_it4x.aos), reboot
Turn on USB debugging (not sure if this is necessary).
Then follow instructions in the first post.
Note, I did also do the following optional step from that post:
Good luck and post back if this works.
Click to expand...
Click to collapse
@KyleR2, thanks for your answer, I have tried these steps several times, every time I had a boot loop.
Now I have installed the original Firmware 4.0.26, and then the rooteted Version Blue Concept V01, this runs solidly and stable, point the vulture why. But i dont know why, in this Version i can't remove the Android Kernel in the SDE.
Rmaier14 said:
@KyleR2, thanks for your answer, I have tried these steps several times, every time I had a boot loop.
Now I have installed the original Firmware 4.0.26, and then the rooteted Version Blue Concept V01, this runs solidly and stable, point the vulture why. But i dont know why, in this Version i can't remove the Android Kernel in the SDE.
Click to expand...
Click to collapse
Hi!
You can not remove android kernel, if you have already removed android kernel ! :good:
( once you have removed the android kernel, this will not appear as an option the next time ... )
Good luck !
SDE Android Kernel
surdu_petru said:
Hi!
You can not remove android kernel, if you have already removed android kernel ! :good:
( once you have removed the android kernel, this will not appear as an option the next time ... )
Good luck !
Click to expand...
Click to collapse
hi surdu_petru, you have right, but i see the option, when i go to remove android kernel, i'm in the main menue of SDE an the option is visible.
I boot the device sometimes, but the option is visible.
Rmaier14 said:
hi surdu_petru, you have right, but i see the option, when i go to remove android kernel, i'm in the main menue of SDE an the option is visible.
I boot the device sometimes, but the option is visible.
Click to expand...
Click to collapse
OK!
You can try to remove android kernel ! If you removed android kernel, and you can not see on the next boot on SDE, than the device will boot always on custom zImage and initramfs.cpio.lzo made by me , so device will boot always on root rom version !
Good luck :good:
Working Archos 101xs with your ROM
Hi surdu_petru ! I need to thank you. My Archos 101xs is now fully rooted and working fine.
For the rest of the world who's stuck in a bootloop:
-I encountered the same boot loop problem as others.
-I was coming from JB, I had to flash back the ICS aos file from archos to get the new rom working.
-The initramfs file not being recognized : it's recognized directly if you have downgraded correctly. Else you can get past the error if you rename the file without .cpio.lzo, but you'll get stuck at boot.
Following the exact procedure given worked fine.
Now I enjoy surfing without ads
litania72 said:
Hi guys,
sorry but just out of curiosity....does this work on the archos Familypad 2?
any idea or suggestions are extremely appreciated.
Thanks
Click to expand...
Click to collapse
I'm also interested in this. Did you already get any information about familypad2 root/custom rom?
br,
Alex
tuxedo0801 said:
I'm also interested in this. Did you already get any information about familypad2 root/custom rom?
br,
Alex
Click to expand...
Click to collapse
Hi there,
I have managed to root my familypad 2 by using the 'Chinese root'; I explain; I have found a similar yarvik 13 inch tab; then I looked up on rooting options and found one for a yarvik tablet.....I will get you the link....the program is in Chinese....but works perfectly; tried to get rid of that Chinese app and leave SU do the job but I had lost the root. I do not mind leaving it on. Now the familypad I really worth the money Also I made sure I had Moborobo installed to get the right drivers;
http://forum.yarvik.com/showthread.php?4243-root-after-upgrade-to-4-1-1
follow from post 9....good luck. the procedure was safe, no probs, I did it twice, but strangely it did not work on my main pc, I had to install the software and moborobo on my win 8 tablet asus w500. So it worked for me and it should work for you, just make sure you know what to 'click' as it is in mandarin language...if you r Chinese, then lucky u.
let m know..
What about 4.1.4 root ? (New version available on archos website)
Envoyé depuis mon HTC One en utilisant Tapatalk 4 Beta
Related
Hello folks,
I just spend a couple of hours trying to get some new software on my Z1C. My inital plan was to flash PA 4.4 final, but that didn't really work out. Here's what happend:
1) I received the 108 update OTA. I used EasyRootTool ( ht tp://forum.xda-developers.com/showthread.php?t=2784900) with option 2 to regain root access. That seemed to work so far. Afterwards I tried to installed lockeddualrecovery using the Z1C-lockeddualrecovery2.7.129-BETA.installer, and here things started to get strange. I couldn't boot into CWM, so I made a backup using TWRP.
2) I unlocked my bootloader
3) I flashed PA following the instructions given in the thread: ht tp://forum.xda-developers.com/showthread.php?t=2764775
4) I was stuck with a bootloop, showing the PA start screen.
So I tried to roll back using the TWRP I made before unlocking the bootloader, but TWRP won't recognize the backup. I tried putting it in a folder named TWRP, directly into the root folder, interal SD, external SD...all the same, it just doesn't show up. I also can't install one of my older CWM backups, as trying to boot into CWM leads to a bootloop showing the "SONY" screen.
So I decided to flash a stock ROM (D5503_14.4.A.0.108_GenericDE_(1279-6978)) and repeated the procedure. Again, I'm stuck with a TWRP that won't recognize its own backup and a broken CWM. Therefore my question: Am I doing something wrong? Did this tool chain (upgrade to 108 -> EasyRootTool -> lockeddualrecovery) work for anybody else?
matt.s said:
Hello folks,
1) I received the 108 update OTA. Afterwards I tried to installed lockeddualrecovery using the Z1C-lockeddualrecovery2.7.129-BETA.installer, and here things started to get strange. I couldn't boot into CWM,
Click to expand...
Click to collapse
You should use search function or read a bit more in the Recovery thread:
.129 beta doesn´t work with 14.4.A.0.108.
Use instead .128 beta recovery and everything runs fine!
czrtst said:
You should use search function or read a bit more in the Recovery thread:
.129 beta doesn´t work with 14.4.A.0.108.
Use instead .128 beta recovery and everything runs fine!
Click to expand...
Click to collapse
Thanks, I read a lot but somehow this skipped my attention... :-/
matt.s said:
Thanks, I read a lot but somehow this skipped my attention... :-/
Click to expand...
Click to collapse
No problem
czrtst said:
You should use search function or read a bit more in the Recovery thread:
.129 beta doesn´t work with 14.4.A.0.108.
Use instead .128 beta recovery and everything runs fine!
Click to expand...
Click to collapse
Hmm strange, im on 14.4.A.0.108 and .129 Beta work like a charm....
ThreeMMM said:
Hmm strange, im on 14.4.A.0.108 and .129 Beta work like a charm....
Click to expand...
Click to collapse
Yes, only TWRP but not CWM.
how about 131?
acme64 said:
how about 131?
Click to expand...
Click to collapse
Try it with .132 and let us and @[NUT] know if it works !
http://forum.xda-developers.com/showpost.php?p=53809938&postcount=2392
14.4.A.0.108
for me been exactly same,i still on 757
Hello folks,
I just spend a couple of hours trying to get some new software on my Z1C. My inital plan was to flash PA 4.4 final, but that didn't really work out. Here's what happend:
1) I received the 108 update OTA. I used EasyRootTool ( ht tp://forum.xda-developers.com/showthread.php?t=2784900) with option 2 to regain root access. That seemed to work so far. Afterwards I tried to installed lockeddualrecovery using the Z1C-lockeddualrecovery2.7.129-BETA.installer, and here things started to get strange. I couldn't boot into CWM, so I made a backup using TWRP.
2) I unlocked my bootloader
3) I flashed PA following the instructions given in the thread: ht tp://forum.xda-developers.com/showthread.php?t=2764775
4) I was stuck with a bootloop, showing the PA start screen.
So I tried to roll back using the TWRP backup I made before unlocking the bootloader, but TWRP won't recognize the backup. I tried putting it in a folder named TWRP, directly into the root folder, interal SD, external SD...all the same, it just doesn't show up. I also can't install one of my older CWM backups, as trying to boot into CWM leads to a bootloop showing the "SONY" screen.
So I decided to flash a stock ROM (D5503_14.4.A.0.108_GenericDE_(1279-6978)) using flashtool and repeated the procedure. Again, I'm stuck with a TWRP that won't recognize its own backup and a broken CWM. Same if I start with D5503_14.3.A.0.757_GenericDE_(1279-6978).
Finally I managed to install CWM using the older version Z1C-lockeddualrecovery2.7.128-BETA.installer.zip. My question therefore: Was I doing something wrong or could this be a bug in Z1C-lockeddualrecovery2.7.129-BETA.installer.zip?
matt.s said:
Hello folks,
My question therefore: Was I doing something wrong or could this be a bug in Z1C-lockeddualrecovery2.7.129-BETA.installer.zip?
Click to expand...
Click to collapse
It`s a bug, you didn´t made something wrong!
czrtst said:
It`s a bug, you didn´t made something wrong!
Click to expand...
Click to collapse
Thanks, so if I'm using Z1C-lockeddualrecovery2.7.128-BETA and follow the instructions from the PA 4.4 thread, it shouldn't matter if I come from 108 or 757 right? Right now I'm on 757, so I would prefer to upgrade from here straight to PA 4.4
czrtst said:
It`s a bug, you didn´t made something wrong!
Click to expand...
Click to collapse
I have the same problem. Somebody tried it with new version (Z1C-lockeddualrecovery2.7.130-BETA.installer)?
lovasjoe said:
Somebody tried it with new version (Z1C-lockeddualrecovery2.7.130-BETA.installer)?
Click to expand...
Click to collapse
Doesn`t work with CWM:
http://forum.xda-developers.com/showpost.php?p=53783354&postcount=2378
Use 128 beta and you'll be fine. 129 didn't work for me either.
crótach said:
Use 128 beta and you'll be fine. 129 didn't work for me either.
Click to expand...
Click to collapse
It works with Z1C-lockeddualrecovery2.7.132-BETA! :laugh:
lovasjoe said:
It works with Z1C-lockeddualrecovery2.7.132-BETA! :laugh:
Click to expand...
Click to collapse
confirm Z1C-lockeddualrecovery2.7.132-BETA
This is DEVELOPER EDITION Unicom China but full functional.
update: [System] ● Can not set to solve the problem of dual SIM ringtones. ● solve problems background application background display abnormal. ● solve the problem of the upgrade package can not be deleted. ● New super power saving features. ● Optimized status bar background. ● optimize the system stability and performance. [Desktop] ● Added a button to lock the desktop screen. ● Optimized Desktop default font size. [Camera] ● solve the problem of preservation of black and white photographs from your camera probability of occurrence. ● optimize camera stability. [ theme ] ● download themes unable to solve the problem can not be properly displayed in the status bar, calls and other applications.
link
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
mirror
https://mega.co.nz/#!wt9HXLBY!9vaVXVOmRfVTeETXc1LXXLVzzLdV589WbjM7Ir4HBzc
You must be on b706 stock ROM
How to INSTALL: extract dload folder and copy to SD card.....go to system update---local update....click and wait to install.
OR
copy extracted dload folder to SD card and install from original stock recovery
GAPPS here
https://mega.co.nz/#!F9d00ZIL!d2nA5KP_5L_AMHzxls2uEEkjXtgPGBljdAzF6kdyv9E
flash gapps via twrp
mlsvcbbn said:
link
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
copy to SD card install from original recovery ....you must be on b706 stock rom
Click to expand...
Click to collapse
Thanks
Translated to English
https://translate.google.com/transl...hp?id=hwdownload&mod=detail&mid=42&edit-text=
Downloading..... 18 hours left
.....
2 days left now
Maybe next year?
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
Is this legit? Anyone tried to install the ROM. It says EMUI 3.0.
Thank you.
MarkTulagan said:
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
Is this legit? Anyone tried to install the ROM. It says EMUI 3.0.
Thank you.
Click to expand...
Click to collapse
Yes it is legit since it's from Huawei's website. It's a developer build I think.
mirror https://mega.co.nz/#!wt9HXLBY!9vaVXVOmRfVTeETXc1LXXLVzzLdV589WbjM7Ir4HBzc
mlsvcbbn said:
mirror https://mega.co.nz/#!wt9HXLBY!9vaVXV...89WbjM7Ir4HBzc
Click to expand...
Click to collapse
Cannot decrypt metadata without key. ???
is this the international one ?
dose it have google apps ?
bagufix said:
Cannot decrypt metadata without key. ???
Click to expand...
Click to collapse
try here https://mega.co.nz/#!wt9HXLBY!9vaVXVOmRfVTeETXc1LXXLVzzLdV589WbjM7Ir4HBzc
Can someone repack it ? to be able to flash it through TWRP
if you have somehow already installed this ROM, please confirm if it is an official international release and if there are no Chinese words/letters on the ROM. Thank you.
MarkTulagan said:
if you have somehow already installed this ROM, please confirm if it is an official international release and if there are no Chinese words/letters on the ROM. Thank you.
Click to expand...
Click to collapse
yep, it 's Chinese rom, not international, not gapps, chinese app, but 3g worked
Install it. All ok except for google acount and root. Google acount i activated downloading from vmall google play services.
Unfortunally SUPERSU cant update the binary. I need help to root the device. I installed superuser.zip fille but now luck.
If somewone can guide me trough will be much appreciated.
Thank you.
Why you didn't tried twrp? Is work like a charm [emoji7]
Sent from my iPhone using Tapatalk
shecky said:
Why you didn't tried twrp? Is work like a charm [emoji7]
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Of course i installed twrp. But after root when i open supersu it cant update. And im stuck.
The only pack that is working with twrp is the repack made by "oxalis".
Any ideas?
Strange. It's working perfect with twrp and supersu.
Sent from my iPad using Tapatalk
shecky said:
Strange. It's working perfect with twrp and supersu.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I installed update.app with stock recovery. With the 3 buttons method. I was on the repack by oxalis.
After that i installed twrp 2.8.0.1. Before reboot it asked me if i want to root the phone. I cheked yes. After that the phone rebooted supersu whas installed. After i opened supersu it asked me to update from play or twrp. I chose google play and after that supersu got stuck. From twrp got stuck too. Cant update the binary.
If i did something different from you tell me please. Im willing to reinstall from scrach.
Thank you.
I can not change themes
savudragosh2 said:
I installed update.app with stock recovery. With the 3 buttons method. I was on the repack by oxalis.
After that i installed twrp 2.8.0.1. Before reboot it asked me if i want to root the phone. I cheked yes. After that the phone rebooted supersu whas installed. After i opened supersu it asked me to update from play or twrp. I chose google play and after that supersu got stuck. From twrp got stuck too. Cant update the binary.
If i did something different from you tell me please. Im willing to reinstall from scrach.
Thank you.
Click to expand...
Click to collapse
Try to uninstall the updates on supersu and then see if it installs the binary properly.
Alashe said:
I can not change themes
Click to expand...
Click to collapse
first time choose Default (magazine) theme .....then you can change .
BUMP Your Current Boot Partition
Supports all of G2
Will work for other devices that use BUMP, so long as boot is located at:
Code:
/dev/block/platform/msm_sdcc.1/by-name/boot
Uses:
1) Fix boot partition after flashing SuperSU.
2) Flash any boot.img you want without BUMPing it first. Flash this zip after flashing the non-BUMPed boot.img.
3) Fix boot cert error.**
**This will fix boot cert error as long as you are on JB/KK bootloader. If you broke your phone and got boot cert error by upgrading your bootloader to LP, this won't help.
4) For Dev: The cbump binary in the zip is built static. Feel free to yank it out and use it for your own purposes.
Use: Simply flash in TWRP.
Download:
https://www.gregtwallace.com/
Download is under Miscellaneous.
Credits:
BUMP Team
Open BUMP Team
CBump Dev (who deleted his account, not sure who it was)
--Dev's Source: https://github.com/blastagator/cbump
Shameless plug for donations:
Venmo Preferred (No Fee)
Zelle, send to [email protected]
Backup (Charges Fee)
Paypal
res 1
Wow! Awesome thing for our G2.
Gonna test it, im impressed, thank you buddy!
Wysłane z mojego LG-D802 przy użyciu Tapatalka
@InsideMuz
ok i tried it again on two different ROMS (AiCP-MM.11.0[030516] and crDroid[030616])
Variant: D802
flash in this order:
Code:
1. ROM
2. GAPPS
3. SuperSU.v2.68
4. CBUMP
@blastagator
thanks for this CBUMP Tool.
fLipz said:
@InsideMuz
ok i tried it again on two different ROMS (AiCP-MM.11.0[030516] and crDroid[030616])
Variant: D802
flash in this order:
Code:
1. ROM
2. GAPPS
3. SuperSU.v2.68
4. CBUMP
@blastagator
thanks for this CBUMP Tool.
Click to expand...
Click to collapse
You're saying that I should install it after clean install?
InsideMuz said:
You're saying that I should install it after clean install?
Click to expand...
Click to collapse
yes sir, 'coz i always do a Clean iNstall everytime i flashed a ROM and that is my routine 1 2 3 4
or try to boot to recovery on your current ROM and try to flash SuperSU.v2.68 1st then followed by CBUMP.
@blastagator thanks for your perfect tool working awesome
fLipz said:
yes sir, 'coz i always do a Clean iNstall everytime i flashed a ROM and that is my routine 1 2 3 4
or try to boot to recovery on your current ROM and try to flash SuperSU.v2.68 1st then followed by CBUMP.
Click to expand...
Click to collapse
Don't work anyway.
Finally worked with SuperSU 2.70!
Did not work with superuser.zip from jan 31 2016. Still get a cert error.
Ummm... Hello @blastagator
I'll try to explain this swiftly...
I made a LG Framework Installer for LG G2 (and finally it installed), also the thread is here
It works by installing all required files to system and then modifies the ramdisk so that LG Framework will be added to BOOTCLASSPATH. The installer is working and changes are verified by re-extracting ramdisk to a connected computer and checking BOOTCLASSPATH on init.environ.rc.
And here is the problem, I know that cert will be broken so I used your CBUMP but booting still gives me secure boot errors... Please help us
xxoscarxx28 said:
Ummm... Hello @blastagator
I'll try to explain this swiftly...
I made a LG Framework Installer for LG G2 (and finally it installed), also the thread is here
It works by installing all required files to system and then modifies the ramdisk so that LG Framework will be added to BOOTCLASSPATH. The installer is working and changes are verified by re-extracting ramdisk to a connected computer and checking BOOTCLASSPATH on init.environ.rc.
And here is the problem, I know that cert will be broken so I used your CBUMP but booting still gives me secure boot errors... Please help us
Click to expand...
Click to collapse
Have you tried saving the new boot.img, using the normal python bump, and then reflashing the python bump version? That will at least tell you if it is CBUMP or some other issue.
blastagator said:
Have you tried saving the new boot.img, using the normal python bump, and then reflashing the python bump version? That will at least tell you if it is CBUMP or some other issue.
Click to expand...
Click to collapse
I tried, and python worked. Maybe it is CBUMP, but well... I looked through the source code of both and then just appended the 6 bytes of lg_magic to the boot.img and it works! Hahahahha
Anyway, thanks for your response
LG Framework is now ready
One down, two to go
Hooks to framework.jar (xposed?)
Upgrade API lvl of lp apps (permission handling rework to make mm happy)
I tried to make a porting of miui 8 from n5 and after flash rom i flashed this script for bumping boot image. In the reboot anyway i got boot security error. Why? (for doing porting i must decompile and recompile kernel)
Hi there guys!
Well it seems there's a lot of stuff around Bump and LG and devs that I do not know.. I read something but I really didn't get the basic stuff, I saw a few bump threads closed but then I find this one..
I have a few question for whom who may know, if you please..
I have an LG G Pad 7 where the latest stock is Lollipop; to root and install TWRP I got to downgrade to KK, as many of LG owers got to; then I can flash ROMs. But what if I need a rooted STOCK? The only Stock available for me are kdz, which completely erase any stuff. If I try to root the Lollipop stock I cannot boot anymore because of boot error!
So I would like to know if I took the boot.img from a rooted KK rom and then bump it, could I flash it back to Lollipop stock so that I'll be able to root it? Also, if it is possible, do I need a "special" version of Bump tool or can I use the G2 one, for example?
Well, I think it's all..
Thanks a lot for paying attention, see you!
Thanks so much!
I tried to install Magisk on my vs985 (G3 verizon) and of course got slammed by the flashing red and blue lights secure boot error.
Little bit of googling led me here, and this fixed it right up.
does any one know if this can be made to work for lg devices such as vs425pp and k120 ?
Hi. Apologies for asking this here. I'm a bit desperate, and I've been searching for ways to get magisk installed on my g3 (f460k - the korean cat.6 variant with snapdragon 805). My search brought me here. Unfortunately, my device is dead dev-wise. I'm wondering if this would work on Nougat? I'd like to flash Magisk then this to avoid secure boot error. Thanks.
Edit:
Flash it after flashing magisk on f460k running Nougat and it works!!! Thank you op for this!
I edited boot.img (came out at 11 mb instead of 16 but contents seems as the original).
Entered TWRP and installed edited img. (Cannot enter fastboot)
Installed your zip. Script seemed to execute correctly.
Reboot (withot wipe cache/dalvik)
Got this error on the top left corner of the screen with LG logo
secure booting error boot certification verify
Had to re-enter recovery and install back original boot.img
Any ideas? Thanks
http://k.japko.eu/boot-img-manipulation.html
used above procedure, just unpacked and repacked, got 16 mb boot.img, installed tru twrp, installed cbump, got into fastboot
Hi there,
I wanted to install the latest image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP I keep getting the message : "Unpacking boot image failed" in the log screen.
What I did in order:
- Unlock fastboot mode
- Flash TWRP recovery (found on build.nethunter.com/twrp)
- Reboot on TWRP
- Install kernel ( kernel-nethunter-oneplus3-nougat-3.15.4-20170126-2226 )
- Install ROM ( nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604 )
- Reboot
It is when I install the rom that I get the error message "Unpacking boot image failed". Even if at the end it says "install completed - Success", it keep loading (with the nethunter loading screen) indefinitely...
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Aiscargeauh said:
Hi there,
I wanted to install the last image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP (found on build.nethunter.com/twrp) I keep getting the message : "Unpacking boot image failed" in the log screen.
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Click to expand...
Click to collapse
What ROM are you using?
Last time i installed it i was on OOS 3.2.2. You have to flash kernel and then the big file (generic nethunter.....)
Found that in https://forum.xda-developers.com/showpost.php?p=68451978&postcount=6
It worked perfectly but since 3.2.2 i havent touched it again so not sure what rom is compatible atm
fuarkgl3 said:
What ROM are you using?
Click to expand...
Click to collapse
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Aiscargeauh said:
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Click to expand...
Click to collapse
I mean version of OOS, not nethunter overlay. See my screenshot. You have to download one of the following kernels depending if you are on MM or nougat. Flash it before flashing the nethunter overlay
fuarkgl3 said:
I mean version of OOS, not nethunter overlay
Click to expand...
Click to collapse
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Aiscargeauh said:
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Click to expand...
Click to collapse
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
fuarkgl3 said:
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
Click to expand...
Click to collapse
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Aiscargeauh said:
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Click to expand...
Click to collapse
Got it working. Only problem is i dont find the option to enable OTG-USB lol
fuarkgl3 said:
Got it working. Only problem is i dont find the option to enable OTG-USB lol
Click to expand...
Click to collapse
And I'm here sitting with my error and my infinite boot, lol.
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Aiscargeauh said:
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Click to expand...
Click to collapse
Sure. Just give me time to post what i did, currently restoring my nandroid because something went wrong when updating metapackages, so im going to download full version instead of minimal and enable OGT-USB to check if wifite works. I will post the steps asap :good:
meanwhile..... how the **** do i enable usb-otg? i dont find the option in settings/storage/3dot
Good and bad news: OTG does not work (it worked for me on MM) but nethunter runs "well" ... it stucks while rebooting and some weird things more. It runs laggy as well...
Steps and config i have
-Experience ROM v10.1(oos 4.0.2 with some adds) and custom TWRP by blu_spark v14
1-Download these 2 files from https://build.nethunter.com/nightly/3.15.4-20170202-1604/
-kernel-nethunter-oneplus3-nougat-3.15.4-20170202-1604.zip
-nethunter-generic-arm64-kalifs-full-rolling-3.15.4-20170202-1604.zip
2-Reboot to recovery and install nethunter-generic-arm64.....
3-Not sure if you have to reboot and then install kernel but i flashed nethunter+kernel without rebooting to system
4-Reboot to system and open supersu, then open nethunter app and grant superuser permissions
5-Done.
I Dont really know why my external adapter or pendrive are not recognized, because it did in MM with same hardware lol. Maybe now only works with official usb-c adapter, who knows
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Aiscargeauh said:
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Click to expand...
Click to collapse
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
fuarkgl3 said:
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
Click to expand...
Click to collapse
Do you think flashing another ROM before flashing nh-generic will help ?
Aiscargeauh said:
Do you think flashing another ROM before flashing nh-generic will help ?
Click to expand...
Click to collapse
Dont think so. But latest build i installed NH i didnt use arm64 version but armhf. So maybe try what i did but using custom TWRP by blu_spark v14 and armhf.... im not sure
Tested with 2 antennas and result is the same in both (see SS)