We have a 3com wireless router at home. The laptop downstairs connects to it through a PCMCIA wireless adapter. My phone also connects to it fine, no probs at all.
However, we have a pc upstairs with no wireless on it at all. I have been told that I can use the phone to "simulate" a wireless connection to the router through its USB connection. I have tried this using the program Wireless Modem on the phone but to no avail. Windows XP keeps looking for a driver that a dont have and is not supplies on the CD that comes with the phone. Any ideas where I can get this driver from, or am I doing this just completely wrong...... :roll:
Thanks
There seems to be a growing amount of threads regarding the whole WiFi scenario.
I have experienced problems too. I have managed to configure the wifi and it picks up my belkin wireless router but it cant surf.
I am also using XP!
Your problem is slightly different to mine but I will have a go at your problem too.
GOOD LUCK!
Ok. JUst to update, i have found the drivers that install the the phone as a HTC USB Modem but im still having no luck. Im trying to simulate my phone as a wireless card to connect to my router downstairs.
Is this possible???
samething
Ive just got myself in the same situation. I have the XDA2i connected to my WIFI router fine, I can go on the WWW. Im now need to get my laptop into the loft where Im doing some work on an iriver H10 20gb (trying to construct a connection box as they arn't available until Sept!!!) I need the net access to look up pinouts on chips. I don't have a WIFI card for the laptop yet (should be here soon as on back order :evil: )
SO I want to use the PDA as a wifi card for my laptop through the usb port. How do i get the laptop to see the PDA as a network card and configured for this operation??
Cheers
Hello, I have been searching around for a day and a half now to no avail. I figure I will ask here as a last attempt before I go and buy another USB wifi adapter.
I am trying to use my HTC Dash with WM6.5 to tether an available wifi connection over to my Windows 7 PC. Basically trying to use the phone as a wifi adapter. The phone has no cell data service, but can connect to the home wifi network that is here. My Windows 7 PC has no Wifi adapter (I left it behind >.<).
Here is where I am at. The HTC Dash is connected to the Wifi network, and when I try to select a Network in the ICS program, it says there is none available. I have been able to get USB selected in ICS, and the phone connected to the computer. In Windows I see a Windows Mobile Remote Adapter in the Network Connections area when I sync the device in Windows Mobile Center. But no matter what I try, ICS sharing on the phone will not let me select the Wifi connection it has.
Through my searching I have found a lot of information on tethering 2G and 3G internet through USB, and using the phone as a Wifi Hotspot. But those where no help in this.
My friend on a G1 with Andriod can tether Wifi connections to a pc, and I am wondering if Windows Mobile can do the same thing. I can flash my ROM from to 6.0 or 6.1 WM if needed.
Thanks in advance to any advice given, hopefully someone can help me out
UPDATE: Still have no luck. I found a program called ICS Control v.21, but it only works on touchscreen WM phones, not WM standard. Which means a bunch of crashing.
This program would do exactally what I need it to do... just does not support my phone. Well the search continues... looking like I may just have to go buy an USB Wifi adapter soon.
tethering w/wifi
It does work. I'm currently answering this on my 2nd desktop Vista with my S620 via my home wifi network. Waiting for a 25' ethernet connector to hardware to wifi/modem Not quite sure how it is with a wifi adapter but 2 things I do know from experience. You shouldn't need an adapter.
1st: you can't be in Sync Center while trying to tether, at least in my case on a Vista desktop. It won't let you tether while the sync is running (or your already synced).
2nd: (this worked for me) open internet sharing on your Dash/S620, pc connection-usb and be ready to hit connect the 1st couple of seconds after pluging your usb connector into your phone, and give it 10-20 seconds to actually connect. If you wait to long to hit connect, the phone will start syncing with the computer. Won't let you tether.
RE-read post, missed thar "WinMo" remote part. My bad. Don't own Win 7. Don't know what that is.
Question: Is there an active wifi where you are ? From your post it sounds like "yes"
You do not need a wifi adapter. You do need a USB cord.
I tethered with edge for a bit, but then got to thinking. Try Wifi. It worked, but be quick.
Neither one is super fast but Wifi is definitely faster than Edge. Better than not being on the net at all. Occasionally it'll cut out, just unplug usb, get to connect screen, plug in and hit connect. Should be set.
As a side note: I also tried tethering with G1. Xferd pc driver to Vista from G1 but computer says it can't find the driver. Gave up after 2 hours.
G1 tethering works great on XP though.
Hope this helps. Good Luck. Really cool when it works.
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
ee.mike said:
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
Click to expand...
Click to collapse
I'll have to break out the Dash again and let you know. It's been sitting for weeks since I repaired LCD screen and flashed my TMO Wing. Can't seem to stop playing with it.
Give me a little time and I'll get back to you.
You do have a wifi modem, correct ? I was using usb.
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
ee.mike said:
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
Click to expand...
Click to collapse
Well, in your case, I won't be any help. What I did was run a 2nd computer off of my Dash with a Wifi Modem.
XP in another room with a wifi modem attached on Comcast, Dash on wifi and usb to Vista computer, since I didn't have a 25ft ethernet cable at the time.
Was running Vista-Dash-wifi modem-XP to comcast so I could run 2nd computer without being hard wired.
I'm familiar with wifirouter cab. It let's you use your phone like a hotspot, correct ?
In all my searches for various things for the phones, I thought I saw a different application that did the same thing. Possibly might even have it. I'll check and upload for ya if I find it. Have hundreds of cabs/zips to search. Let you know.
Possibly google it and you might find it yourself. There's a program called: WalkingHotSpot online for $24.99 if you don't mind spending. Dash isn't listed as a supported windows device but looking at the other phones listed my guess would be it should work. Try their DEMO version, see if it works.
Good Luck.......
2AM and I was just wondering......When you received your phone, you also got a usb cable with it, right ?
Why don't you just usb Dash to laptop and use "internet sharing" ????
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
ee.mike said:
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
Click to expand...
Click to collapse
Do you have a home computer ? If so, get yourself a Wifi Modem and set up a home network. $40-60. Although Comcast sold me mine for $20 and I get to keep it. I can get all 5 phones on the internet at the same time, not that I need to. It'll also be so much faster then running thru Edge. Besides the fact video's don't play for crap tethered running through Edge. Just a suggestion.
My opinion stands concerning Apple. Get ready to cough up more fees for internet (ATT). They're doing away with unlimited data. Did you see their prices ?
You'll never catch me with ATT.
I just put WMWifiRouter on my TMO Wing 6.5. let you know how it worked. Setup went fine, so far.
did you try downloading the actual .cab from WMWIFIROUTER.COM it's only a trial for 21 days, the "Free" versions don't work on the dash i've tried many of them.
once you install and get it set up be sure to write down the Access ID and Password it gives you so you can connect to the WiFi signal beaming from your phone from your PC. It works for me to tether a WiFi connection from my Dash to PC though I prefer the more stable Internet Sharing USB to PC and I have an Unlimited Data Plan.
WMWIFIROUTER also lets you tether a connection from your phone via bbluetooth.
I use WMWiFiRouter and its a life saver. It lets you pretty much tether any connection to any other.
Just yesterday I was at a meeting in a resturant with some clients and used it to hook my netbook to the internet and used bluetooth as the connection to the phone. Yes, Internet Sharing can do that, but it has alot more it can do too.
You can use Bluetooth, USB (it shows up as a USB modem), or even set it up as a WiFi Router.
Very cool program and it works perfectly on the Dash. I love it.
I never tried the trial version. A friend of mine showed it to me, so I just bought it. It's under $20. Well worth it if you run into that situation often.
My wife has the Sprint version of the HTC Snap with the stock Windows Standard 6.1 ROM. I'm trying to setup Internet Connection Sharing so that she can tether to her laptop using a USB cable.
I don't think this phone has WiFi, so I cannot use a WiFi Router.
When I go into ICS, select Connect, and plug in the cable to the laptop, it seems to connect to the laptop, but displays Waiting for Network on the phone. The laptop cannot conenct to the Internet. Did Sprint do something to disable ICS? The phone has a good signal and has no issues connecting to the Internet by itself.
Has anyone gotten this to work on the Sprint network?
My Tilt 2 has been connecting to my Linksys router with no issues until yesterday. This was even after I flashed a new ROM. It has been painless until I lost my internet connection with AT&T and had to reboot my modem and my router. Since then I have been unable to connect at all. I have other wireless PC's that are connecting to my router with no problems. I have spent a lot of time going over and over the internet wi-fi settings. The phone is picking up the router, but never connects. I do not have any security running so this should not be it.
Any ideas?
Hello people,
hopefully i am in the right Thread.
I am using now for few days a LTE 4G (from AliExpress) Stick in my car.
Its connected to the USB Port of my Pumpkin Radio.
After few minutes the App EasyConnection-CarbitLink starts and the Stick is NOT connecting to the internet and the WiFi is not enabled. This is very annoying.
So i have to forceclose this app EVERYTIME when i am turning on the engine of my car.
But even then the Stick lose ,while driving, sometimes the connection to the internet and Wifi.
I already tried the Stick at home and have no problems.
Any recommendations?
Hi, mobile-freak.
I also suffered this same problem altought it happened with a Huawei dongle.
The problem is: dongle tries to comunicate by the usb port with HU, but there´s not compatibility in communication.
The only thing you have to do is connect the dongle to a 5V universal usb charger and dongle will connect to the ISP and will establish a wifi network to which you´ll be able to connect without more problems.
This way, EasyConnection will not start.
I got one with WiFi and 4G, USB is only used for power. So I connect with WiFi from the HU to the dongle.