Desire Hd doesnt start up - Desire HD Q&A, Help & Troubleshooting

I Have been using cm10.1 nightly rom on my phone.... one fine day the phone stopped working, and it doesnt start up.
if i connect it to power supply, i am able to reach the recovery and change roms.... so then i changed rom back to default one by flashing PD98IMG.zip.
After that too same response from phone.
Phone doesnt start unless connected to charger.
If connected to charger and i turn it on... it goes up to the level were we can select language to be used in the phone... and then it restarts, also can still enter recovery when phone is connected to power supply.
Do you have any clue on the problem ?
Is it any hardware problem ?
How can i get the phone working again ?

some one pls replyyyy

orkuto said:
some one pls replyyyy
Click to expand...
Click to collapse
try reformat phones memory and also sd card, or if u using 4ext realign de sd card...hope it works

Boneyy said:
try reformat phones memory and also sd card, or if u using 4ext realign de sd card...hope it works
Click to expand...
Click to collapse
that didnt help

orkuto said:
that didnt help
Click to expand...
Click to collapse
Try booting without the sdcard. Then see if you can get a different battery...That doesn't sound to be a software issue.

glevitan said:
Try booting without the sdcard. Then see if you can get a different battery...That doesn't sound to be a software issue.
Click to expand...
Click to collapse
Tried booting without sd card too .. did not help...
Dont think battery is damaged !

When in bootloader, or when phone is on the language selection state, try installing a stock ruu to see if it fixes the issue. If it does not it is 90% a hardware issue. If you can't find a ruu write here I will give you a link to one, if you would upload a picture of the bootloader for me(or write your radio version here)

orkuto said:
I Have been using cm10.1 nightly rom on my phone.... one fine day the phone stopped working, and it doesnt start up.
if i connect it to power supply, i am able to reach the recovery and change roms.... so then i changed rom back to default one by flashing PD98IMG.zip.
After that too same response from phone.
Phone doesnt start unless connected to charger.
If connected to charger and i turn it on... it goes up to the level were we can select language to be used in the phone... and then it restarts, also can still enter recovery when phone is connected to power supply.
Do you have any clue on the problem ?
Is it any hardware problem ?
How can i get the phone working again ?
Click to expand...
Click to collapse
TRY THIS 1 time....this tool help me for same PROBLEM::::
AAHK

orkuto said:
Tried booting without sd card too .. did not help...
Dont think battery is damaged !
Click to expand...
Click to collapse
Why not?
nino2603 said:
TRY THIS 1 time....this tool help me for same PROBLEM::::
AAHK
Click to expand...
Click to collapse
Why would AAHK work for this? It's been retired, and I don't know what it would do in this case anyway.

Related

Bricked my Galaxy Gio

Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.
did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.
Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
+
Yes this way usually works. I've tested this way.
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible
bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem
same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:
I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse
Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse

HTC ONE X wont turn on

I went browsing on my stock browser (I am using stock ROM with root) the browser freezes and everything freezes so i turn it off by holding the power button down for a few secs.. now it wont start or charge nothing seems to work.. i had 40-50% battery.. please help me
Leave it on the wallcharger, is the red light on when you plug it in ?
Mr Hofs said:
Leave it on the wallcharger, is the red light on when you plug it in ?
Click to expand...
Click to collapse
No, no led light.
Hmmm pretty dead. Keep it on the wallcharger over night and power it up in the morning !
Mr Hofs said:
Hmmm pretty dead. Keep it on the wallcharger over night and power it up in the morning !
Click to expand...
Click to collapse
I¨ll try that thanks!
Did you try to go into recovery or download modes?
do you use any SD card?
Sdcard....lol that's embedded in the phone. No choice in sdcards. And if the phone won't boot its very hard to get into the recovery at all
Simonna said:
Did you try to go into recovery or download modes?
do you use any SD card?
Click to expand...
Click to collapse
I say the same like mr hofs
Mr Hofs said:
Sdcard....lol that's embedded in the phone. No choice in sdcards. And if the phone won't boot its very hard to get into the recovery at all
Click to expand...
Click to collapse
I say the same like mr hofs
Click to expand...
Click to collapse
But you can always try to go into recovery or download modes, if you can go there you can wipe everything or re-install stock firmware using computer.
And sometimes it can be faulty SD card too (I mean some damaged files on it) so that's why I asked if he is using SD card or not.
No he can't ! Blimey......as you can NOT turn on the phone in any way.....then you can't go to the bootloader and also not into the recovery. We have no so called download modes. And the sdcard can not be removed ! Its not a Samsung
Simonna said:
But you can always try to go into recovery or download modes, if you can go there you can wipe everything or re-install stock firmware using computer.
And sometimes it can be faulty SD card too (I mean some damaged files on it) so that's why I asked if he is using SD card or not.
Click to expand...
Click to collapse
Asking if he had an SD card is pointless as the hox has no expandable capabilities.
@op you tried power + vol down combo?
Or power + vol up and down?
Sent from my HTC One X using xda app-developers app
Mr Hofs said:
No he can't ! Blimey......as you can NOT turn on the phone in any way.....then you can't go to the bootloader and also not into the recovery. We have no so called download modes. And the sdcard can not be removed ! Its not a Samsung
Click to expand...
Click to collapse
Oh damn sorry my bad, it's even doesn't have SD card slot.
Simonna said:
Oh damn sorry my bad, it's even doesn't have SD card slot.
Click to expand...
Click to collapse
Why are you replying to the question if you don't know the hardware and how it works ? I think its not that smart........ and no is has no sdcard slot.
I'm not repying in a Samsung, or iPhone forum ......why ? Because i know crap about those phones. Stick to stuff you know but don't go guessing around. Its a valuable piece of electronics
Mr Hofs said:
Why are you replying to the question if you don't know the hardware and how it works ? I think its not that smart........ and no is has no sdcard slot.
I'm not repying in a Samsung, or iPhone forum ......why ? Because i know crap about those phones. Stick to stuff you know but don't go guessing around. Its a valuable piece of electronics
Click to expand...
Click to collapse
Smart or not but everybody make mistakes, and we can learn from them.
hehe, luckily I am not fanboy of Samsung, nor of other-branded phones, I just like getting some new info of the various phones, and to know their pros and cons, it's quite cool,lol.
I know but this is the Q&A section where people would like to know facts from people who kinda know what they are talking about. Need info, go read the stickies and tutorials !
Mr Hofs said:
No he can't ! Blimey......as you can NOT turn on the phone in any way.....then you can't go to the bootloader and also not into the recovery. We have no so called download modes. And the sdcard can not be removed ! Its not a Samsung
Click to expand...
Click to collapse
it doesnt start after the night has gone either...
That's not a good sign, keep trying.....hold the power button & the volume - button together, do that couple of times. Hopefully it starts to the bootloader. And what happends when you connect it to the pc ?
Mr Hofs said:
That's not a good sign, keep trying.....hold the power button & the volume - button together, do that couple of times. Hopefully it starts to the bootloader. And what happends when you connect it to the pc ?
Click to expand...
Click to collapse
Ive done that a few times... when i connect it to the pc it makes a dingaling sound and says unknown device (malfunctioned)
Jontebert said:
Ive done that a few times... when i connect it to the pc it makes a dingaling sound and says unknown device (malfunctioned)
Click to expand...
Click to collapse
I have a idea might work if your device is rooted and debug is enabled and android sdk installed on your pc . In cmd/terminal try adb reboot recovery or adb reboot bootloader
Sent from my HTC One X using XDA Premium 4 mobile app
elsworth1983 said:
I have a idea might work if your device is rooted and debug is enabled and android sdk installed on your pc . In cmd/terminal try adb reboot recovery or adb reboot bootloader
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
cmd says error device not found..

[Q] please help its urgent

my phone gets just off, nad when i powered it on it dosent on even no light nothing and i dodnt ext4 partion on my phone and last thing i done is use of swapiness.. and then i reboot and now its not opening no light nothing...
Have you tried re-flashing a stock ftf onto your phone. Though if your computer doesn't detect your phone while its in flashmode, you might have a hard brick. If so, you have two options, buy a new phone or send your phone to sony to get it fixed. Good luck
paper13579 said:
Have you tried re-flashing a stock ftf onto your phone. Though if your computer doesn't detect your phone while its in flashmode, you might have a hard brick. If so, you have two options, buy a new phone or send your phone to sony to get it fixed. Good luck
Click to expand...
Click to collapse
cant the hard brick gets correct.,,,
really..
I was partitioning my sd card with Aparted but as soon as I turned off my Xperia M to reboot it it got bricked and hasn't been working since. Cant get it to into flashboot mode or flashmode to flash the original firmware. No lights or buttons are working
rsrishabh said:
cant the hard brick gets correct.,,,
really..
I was partitioning my sd card with Aparted but as soon as I turned off my Xperia M to reboot it it got bricked and hasn't been working since. Cant get it to into flashboot mode or flashmode to flash the original firmware. No lights or buttons are working
Click to expand...
Click to collapse
Yup, sounds like a hard brick to me. And no you cant fix a hard brick
paper13579 said:
Yup, sounds like a hard brick to me. And no you cant fix a hard brick
Click to expand...
Click to collapse
how i conact to ansebovi
i think he can help me out
rsrishabh said:
how i conact to ansebovi
i think he can help me out
Click to expand...
Click to collapse
Go ask ansebovi, but i bet he will tell u the same thing.
Just remove the battery and put it back on... and charge your device for 2-3 hours.. and then remove the battery and insert it again and see if the LeD blinks, if it doesnt them press and hold power button and see if it vibrates..
syedafzal.shah said:
Just remove the battery and put it back on... and charge your device for 2-3 hours.. and then remove the battery and insert it again and see if the LeD blinks, if it doesnt them press and hold power button and see if it vibrates..
Click to expand...
Click to collapse
thanks for repling but i give it sony service cenre,, just tell me that my device has un;ocked bootlaoder by me,,a nd cyanogenmod ro on it. so when sony service centre will on it, they will tell me that my warranty is void or they will flash the latest stock rom with flashtool...
rsrishabh said:
thanks for repling but i give it sony service cenre,, just tell me that my device has un;ocked bootlaoder by me,,a nd cyanogenmod ro on it. so when sony service centre will on it, they will tell me that my warranty is void or they will flash the latest stock rom with flashtool...
Click to expand...
Click to collapse
They will know that your device is running custom ROM.. They will connect your device to PC using EMMA software and it will not detect your device or its model number (if it is Hard brick) then they will Send it back to you.... If it's really a Hard Brick then nothing they can do.....
Report me back if they will give your device back and let's try some other things and see if it can work... I also got my device bricked and send it to Sony center and they gave it back to me saying it's Hard Brick and I have messed up with my device Software... But my device use to vibrate and I tried something and it's working fine now
syedafzal.shah said:
They will know that your device is running custom ROM.. They will connect your device to PC using EMMA software and it will not detect your device or its model number (if it is Hard brick) then they will Send it back to you.... If it's really a Hard Brick then nothing they can do.....
Report me back if they will give your device back and let's try some other things and see if it can work... I also got my device bricked and send it to Sony center and they gave it back to me saying it's Hard Brick and I have messed up with my device Software... But my device use to vibrate and I tried something and it's working fine now
Click to expand...
Click to collapse
okay,, i will le you know all the process...
and 1 more think to ask that, my phone is in dead condition, but i unlocked my bootloader so, when they will make my phone work,, they will notice that my phone warranty is void or they will didnt notice about that when they flashing software in my phone.
If the issues occured after partitioning the SD Card, did you try removing it and booting without SD Card inserted?
If the SD Card is the problem, then it can't be a hard brick, according to my logic.
-FliP- said:
If the issues occured after partitioning the SD Card, did you try removing it and booting without SD Card inserted?
If the SD Card is the problem, then it can't be a hard brick, according to my logic.
Click to expand...
Click to collapse
i tried that to but, when i removed sd card then i reboot,, i cant start even no lights and nothing,, i already said that i got hardbricked
syedafzal.shah said:
They will know that your device is running custom ROM.. They will connect your device to PC using EMMA software and it will not detect your device or its model number (if it is Hard brick) then they will Send it back to you.... If it's really a Hard Brick then nothing they can do.....
Report me back if they will give your device back and let's try some other things and see if it can work... I also got my device bricked and send it to Sony center and they gave it back to me saying it's Hard Brick and I have messed up with my device Software... But my device use to vibrate and I tried something and it's working fine now
Click to expand...
Click to collapse
i get my xperia m phone, and i got replaced my motherboard and and when i got my phone its bootloader was locked i dont know how they do it,, but they didnt know about that my bootloader i unlocked and my warranty was void but they didnt ask me for more money...
rsrishabh said:
i get my xperia m phone, and i got replaced my motherboard and and when i got my phone its bootloader was locked i dont know how they do it,, but they didnt know about that my bootloader i unlocked and my warranty was void but they didnt ask me for more money...
Click to expand...
Click to collapse
hoo.. you are lucky Man... Congrats
syedafzal.shah said:
hoo.. you are lucky Man... Congrats
Click to expand...
Click to collapse
yup,, i think that too, and i got my phone battery replaced too...

[Q] how adb works without debugging enabled?

how adb works without usb debugging enabled?? my phone stuck on HTC logo and it has stock rom and stock recovery
when i press on recovery at bootloader it doesn't come up and broken logo appears
plz help me
big_robber said:
how adb works without usb debugging enabled?? my phone stuck on HTC logo and it has stock rom and stock recovery
when i press on recovery at bootloader it doesn't come up and broken logo appears
plz help me
Click to expand...
Click to collapse
why did this happen to your device? has it lost power, or is it a hardware change (sdcard or sim-card)?
is the bootloader unlocked or not?
qwerty123443 said:
why did this happen to your device? has it lost power, or is it a hardware change (sdcard or sim-card)?
is the bootloader unlocked or not?
Click to expand...
Click to collapse
bootloader is locked
i think it happened because of a shock but im not sure
and i removed sim and sd card
big_robber said:
bootloader is locked
i think it happened because of a shock but im not sure
and i removed sim and sd card
Click to expand...
Click to collapse
i'd suggest going into fastboot and then reflashing the stock image if you don't mind losing your data.
if that doesn't work i'd suggest going to a shop of some sort.
qwerty123443 said:
i'd suggest going into fastboot and then reflashing the stock image if you don't mind losing your data.
if that doesn't work i'd suggest going to a shop of some sort.
Click to expand...
Click to collapse
I dont care about my data
but my pc doesn't recognize the phone
so how i can reflashing ???
big_robber said:
I dont care about my data
but my pc doesn't recognize the phone
so how i can reflashing ???
Click to expand...
Click to collapse
is it recognised in fastboot (you must have the drivers)?

[Q] help, phone won't turn on after flashing 20b

Hi, I tried to flash 20b through twrp tonight.
I did factory reset, then flashed the bootstack, then flashed the system. But after that, my phone won't power on. I tried to remove the battery, holding power button for a long time, or power+volumn down.
The phone just does not respond at all. Can anybody help? Thanks!
souvenir1977 said:
Hi, I tried to flash 20b through twrp tonight.
I did factory reset, then flashed the bootstack, then flashed the system. But after that, my phone won't power on. I tried to remove the battery, holding power button for a long time, or power+volumn down.
The phone just does not respond at all. Can anybody help? Thanks!
Click to expand...
Click to collapse
take the battery out and put it back in and try to power it on. Repeat a few times, if that doesn't help we'll try other things.
Still_living714 said:
take the battery out and put it back in and try to power it on. Repeat a few times, if that doesn't help we'll try other things.
Click to expand...
Click to collapse
Thank you Still_living714, I tried this multiple times, but it does not work. Anything else I can try?
souvenir1977 said:
Thank you Still_living714, I tried this multiple times, but it does not work. Anything else I can try?
Click to expand...
Click to collapse
have you tried putting it into download mode?
Still_living714 said:
have you tried putting it into download mode?
Click to expand...
Click to collapse
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
souvenir1977 said:
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
Click to expand...
Click to collapse
hmm very weird. I had a similar problem were the phone wouldn't boot unless I had it plugged into the charger or my computer,give that a try.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
souvenir1977 said:
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
Click to expand...
Click to collapse
when I had that problem I figured out that it was the battery that was making the phone act weird. Since LG sent me another battery when they had the promotion I used the other spare and that fixed it for me.
This happens right after I flashed the new system, I doubt it is the batter problem. If I plugged into the computer it still won't power on.
(If I remove the battery and plug into computer, the screen of the phone does show some symbol, probably regarding missing memory).
Let me try to see if I use kdz flash to reinstall the system. Thanks for the help.
souvenir1977 said:
This happens right after I flashed the new system, I doubt it is the batter problem. If I plugged into the computer it still won't power on.
(If I remove the battery and plug into computer, the screen of the phone does show some symbol, probably regarding missing memory).
Let me try to see if I use kdz flash to reinstall the system. Thanks for the help.
Click to expand...
Click to collapse
well it's hard to say but without the phone being able to boot there's not anything you can do.....
you are right, flashing need the download mode....
You're getting adnroidserial xxxx in device manager when you connect it to pc?
i think you bricked phone
jkjambo said:
You're getting adnroidserial xxxx in device manager when you connect it to pc?
i think you bricked phone
Click to expand...
Click to collapse
No it just shows regular LGE com port and I am not able to flash anything. You are right, it's hard bricked I am not sure what went wrong with my twrp flashing procedure though. Will contact with LG for repair.
souvenir1977 said:
No it just shows regular LGE com port and I am not able to flash anything. You are right, it's hard bricked I am not sure what went wrong with my twrp flashing procedure though. Will contact with LG for repair.
Click to expand...
Click to collapse
that's what i mean , lge serial xxx , don't remeber exactly . it's in qhsusb mode , hardbricked ...
there is some indian guys who do that , some for free, some for little amount of money ...
search for lg g3 unbrick Qhsusb 9008... don't waste time on tutorials , non of them works with D851 ... i'm in same boat (again ) and tried everything .. nothing works , unless you're connected to lg servers directly , search for people which fixs them
http://forum.xda-developers.com/lg-...1-d855-qhsusbbulk-t3101435/page2#post60751870
here you go.
this guy helped me for free , you can contact with him
Thanks! Currently my phone is at LG service since it is still in warranty. I will definitely try that next time (knock on wood...)
jkjambo said:
http://forum.xda-developers.com/lg-...1-d855-qhsusbbulk-t3101435/page2#post60751870
here you go.
this guy helped me for free , you can contact with him
Click to expand...
Click to collapse
souvenir1977 said:
Thanks! Currently my phone is at LG service since it is still in warranty. I will definitely try that next time (knock on wood...)
Click to expand...
Click to collapse
This is why You don't flash the boot chain unless you absolutely must. I was running 20B with the old boot chain (other than rpm, that was updated) and it ran just fine. If you get a bad flash on the boot chain your sol.

Categories

Resources