Okay, I have seen many post on hard brick and also seen the many suggestions. Tried all but it seems that I just have to bite the bullet and turn it in to either Sprint or Samsung. I loaded a international rootbox mod and hard bricked my phone. It recognize by my pc by the usb connection and assigning a com port. It dose not load the flash drives though. Odin dose not recognize the usb connection. I tried qubking777 methods(which seem to be used for only soft bricking), tried to put it every mode possible, and even removed the sd/battery then connect to usb. It gets a red led light for about a couple minutes but nothing in trying to flash via Odin. If anyone has anything new that I can try without jig/Jtag would be helpful. I have been claim to be a noobie at this from friend at work and know that the pc world is different from the smartphone world but some of the concepts are the same. That if you think the same way as I do. So please no crazy remarks that is any demeaning ways. I do have some experience with root and mods when I did this HTC EVO original.
Thanks
Its done the only way to fix is JTAG if you don't want to go through Samsung or sprint which would be insurance fraud anyway
Sent from my SPH-L710 using xda app-developers app
evo4gnoob said:
Its done the only way to fix is JTAG if you don't want to go through Samsung or sprint which would be insurance fraud anyway
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
To my knowledge, none of the Jtag methods worked on the G S III [currently].
teh roxxorz said:
To my knowledge, none of the Jtag methods worked on the G S III [currently].
Click to expand...
Click to collapse
I've seen people report that they work. Never tried it myself, but thats just my 2 cents
@OP............have you read the numerous stickies, questions, threads, posts about what to flash and what not to flash? kennyglass123 and numerous others have made sticky threads about how to get started, what to do and not do after you root
Cmon dude, even though they may have the same name doesnt mean that software-wise theyre the same
I have an EVO 4G and an EVO shift 4G, but i dont go flashing roms between the two just because theyre similar
When you're doing this kind of system level, you need to know what you're getting yourself into, in the end you couldve just asked in the thread if it works for the sprint s3 or <insert carrier here> s3, and you wouldve gotten a "no"
CNexus said:
I've seen people report that they work. Never tried it myself, but thats just my 2 cents
@OP............have you read the numerous stickies, questions, threads, posts about what to flash and what not to flash? kennyglass123 and numerous others have made sticky threads about how to get started, what to do and not do after you root
Cmon dude, even though they may have the same name doesnt mean that software-wise theyre the same
I have an EVO 4G and an EVO shift 4G, but i dont go flashing roms between the two just because theyre similar
When you're doing this kind of system level, you need to know what you're getting yourself into, in the end you couldve just asked in the thread if it works for the sprint s3 or <insert carrier here> s3, and you wouldve gotten a "no"
Click to expand...
Click to collapse
The mentioning of me doing things to the EVO and talking about the same thing was saying that I am reading and not jumping into stuff i do not know about when working with the S3. Yes they have different ways of rooting and flashing what not but the technology and concepts are the same. The only thing have jumped into over my head was that I grabbed the international load of rootbox mod because there was no clear indication what mod was what from their website. Once I loaded that and reboot, now I am a bricked. I am just trying to see if there anything that I haven't tried yet. It seems that I have indications that the phone has not gone to far and I can do something. Maybe something that works the with bootloader to get it to a point to clear and flash a restore..
The technology is not the same either
The international version is GSM while the sprint variant is cdma, the international version is quadcore while the sprint one is not
Software wise, the partitions line up, but incorrectly
The boot partition on the sprint variant lines up with the misc partition on the international, and a couple other partitions line up incorrectly as well
teh roxxorz said:
To my knowledge, none of the Jtag methods worked on the G S III [currently].
Click to expand...
Click to collapse
Mobiletechvideos.com are recommended by a lot of people
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------
johnboy228 said:
The mentioning of me doing things to the EVO and talking about the same thing was saying that I am reading and not jumping into stuff i do not know about when working with the S3. Yes they have different ways of rooting and flashing what not but the technology and concepts are the same. The only thing have jumped into over my head was that I grabbed the international load of rootbox mod because there was no clear indication what mod was what from their website. Once I loaded that and reboot, now I am a bricked. I am just trying to see if there anything that I haven't tried yet. It seems that I have indications that the phone has not gone to far and I can do something. Maybe something that works the with bootloader to get it to a point to clear and flash a restore..
Click to expand...
Click to collapse
Phones completely done dude. You can't do anything to recover it without getting it jtagged. You have no boot loader the partition for the kernel on the international S3 is the partition where our boot loader is stored so when you flashed that international rom it wiped your boot loader and wiped other important partitions
Sent from my SPH-L710 using xda app-developers app
Lol. Another one which found the correct model after hard brick his phone.
Sorry but JTAG is your only option.
Sent from my SPH-L710
csmasn said:
Lol. Another one which found the correct model after hard brick his phone.
Sorry but JTAG is your only option.
Sent from my SPH-L710
Click to expand...
Click to collapse
Thank you for pointing this out. The OP also gets defensive when it's pointed out. He uses all the wrong stuff but when he breaks it he finds the right section to seek help. :banghead::banghead::banghead::banghead::banghead:
he claims he is reading and not jumping into things, I guess he skipped over the word INTERNATIONAL as opposed to the one on this section SPRINT.
OP and as you wrote "please no crazy remarks" this and the others are not crazy it's just amazing how you did not find the right section to begin with but had no problem finding it now that you messed it up?
Transmitted with a portable device using Xparent Blue Tapatalk 2
So you guys want defensively. You getting it. Believe it or not, technology is blending together. I have background in IT field to see the history of it all for almost the last 20 yrs. Yes different manfactor and carriers define these phones but that is the only thing that seperate these from computer is the phone portion. Yes I have been following this fourm for a while which lead me to the rootbox mod page in the first place and known where to paste certain threads. I don't even know why I thought there was some very intelligent people on here that are nothing but very disrespecting when someone is looking for just the slightest information. If any one wants a extra check by there chuck wagon meter, please point me in the right direction. Can't believe that I posted any thing here after seeing this stuff in other post. THANKS EVERYONE!
Johnboy you have to understand we get three or four of these every week from people who do not read and just flash away. They find a rom on the international thread and flash it. Voilà 600 dollar paperweight. Then they do fraud and claim hey don't know why their device doesn't work. Who pays all of us with the continued rise in cost on our device.
It's funny though how every single one of them find their way to the right place and forum when they mess-up their phone. Amazingly!
This is the best place and forum to find the right information about your device. Swallow up a little pride own up to that you made a bone head move, and move on and stick around. You will find lots of support.
If not 'goodnight Johnboy'
Transmitted with a portable device using Xparent Blue Tapatalk 2
edfunkycold said:
Johnboy you have to understand we get three or four of these every week from people who do not read and just flash away. They find a rom on the international thread and flash it. Voilà 600 dollar paperweight. Then they do fraud and claim hey don't know why their device doesn't work. Who pays all of us with the continued rise in cost on our device.
It's funny though how every single one of them find their way to the right place and forum when they mess-up their phone. Amazingly!
This is the best place and forum to find the right information about your device. Swallow up a little pride own up to that you made a bone head move, and move on and stick around. You will find lots of support.
If not 'goodnight Johnboy'
Transmitted with a portable device using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
This most be copy & pasted in every "flashed wrong/hard brick"
Sent from my SPH-L710
Like my mamma always said. If you don't have anything nice to say, don't say nothin! For some reason, i hear it in a southern accent. Even though I'm from upstate NY. These posts will never end. And insurance fraud claims will never end. Either way, the cost of our phones will rise.
ooonimrodooo said:
Like my mamma always said. If you don't have anything nice to say, don't say nothin! For some reason, i hear it in a southern accent. Even though I'm from upstate NY. These posts will never end. And insurance fraud claims will never end. Either way, the cost of our phones will rise.
Click to expand...
Click to collapse
Ya! Sounds like a $600 with a 5 years contract.
Sent from my SPH-L710
edfunkycold said:
Johnboy you have to understand we get three or four of these every week from people who do not read and just flash away. They find a rom on the international thread and flash it. Voilà 600 dollar paperweight. Then they do fraud and claim hey don't know why their device doesn't work. Who pays all of us with the continued rise in cost on our device.
It's funny though how every single one of them find their way to the right place and forum when they mess-up their phone. Amazingly!
This is the best place and forum to find the right information about your device. Swallow up a little pride own up to that you made a bone head move, and move on and stick around. You will find lots of support.
If not 'goodnight Johnboy'
Transmitted with a portable device using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Thanks edfunkycold, I do understand that this get a little redundant. This is not going to get me to swallow on a bone head move. It is determination to find a solution and help find a end this repeated cycle for everyone. Seeing other threads the phone dose respond to get a port assignment and is requesting for a driver install. So that is some of good sign. Everyone keep your eyes and ears open and I will be back with something. lol
Kudos to you Johnboy for powering on to find a solution. Good luck to you.
Friendly Neighborhood Moderator
johnboy228 said:
Thanks edfunkycold, I do understand that this get a little redundant. This is not going to get me to swallow on a bone head move. It is determination to find a solution and help find a end this repeated cycle for everyone. Seeing other threads the phone dose respond to get a port assignment and is requesting for a driver install. So that is some of good sign. Everyone keep your eyes and ears open and I will be back with something. lol
Click to expand...
Click to collapse
I'm going to save some time and update your status for you. As you'd see this imformation if you searched...
The drivers its requesting is the "QHSUSB_DLOAD" driver. Its basically a piece of hardware waiting for firmware to be loaded at a factory level. You will not talk to it with any software you currently own, hence the jtag requirement. Spent months hoping to do the same. You won't I promise. If I'm not mistaken even Samsung doesn't fix it in the state its in. I believe they send it to qualcomm, could be mistaken there tho so don't quote me on that. And props to edfunkycold for telling it like it is. Needs to be said and youll probably recieve an infraction now for not holding his hand and telling him it will be okay. Telling people the truth tends to get you in trouble on here.
I know that I am going to get plenty of flack for this but after a week in working this issue. I had given up and turn it in for new. Even after building a jig that did not do anything at all. I know the jig works because it sent the new phone into download mode immediately but it did not reset the flash counter. Sorry for not finding a fix or even had to turn my phone in. In my field it takes breaking something to make sure you never do it again. So now I know not do flash anything for the GS3 I9300 for the the Sprint model.
johnboy228 said:
Thanks edfunkycold, I do understand that this get a little redundant. This is not going to get me to swallow on a bone head move. It is determination to find a solution and help find a end this repeated cycle for everyone. Seeing other threads the phone dose respond to get a port assignment and is requesting for a driver install. So that is some of good sign. Everyone keep your eyes and ears open and I will be back with something. lol
Click to expand...
Click to collapse
Man, you are wasting your time, get the damn thing JTAG, period. If you are looking for a free fix, it AIN'T happening....the international rom hard bricked...period.
BTW, being an IT guy, you should have known to read before applying....you are more knowledgeable than some of the noobs. And by your negative responses, it is for sure a tech reply!
---------- Post added at 10:31 AM ---------- Previous post was at 10:26 AM ----------
IF ANYONE EVER GETS THIS IN DEVICE MANAGER......"QHSUSB_DLOAD"...it is hosed. Pay the 60.00 and get it over with.
And NO a jiig will NOT work!
now hit the THANKS button...heheh
Related
I was going through the Stuck at Data.img thread and came across the post below from Jaymoon and just thought others may want to take a look at it. It looks like you can bring your phone back to life.... Hope it helps a few of you
http://forum.xda-developers.com/showpost.php?p=27852689&postcount=435
http://forum.xda-developers.com/showpost.php?p=27888069&postcount=444
What I personally don't want is people going straight to that and then not taking it to Sprint if they can get replaced for free - so they should at least check out their options even after they get it running. But however they get back in the game is what matters in the end... Glad it worked for them.
Question though: If someone gets this running and then claims TEP or warranty repair/replace will it be honored? I'm not sure since I don't have available for me and it would seem that most techs are going to say it's not hardware if they can't see it for themselves. (Versus the bootloop with the unmodified .PIT file.)
garwynn said:
What I personally don't want is people going straight to that and then not taking it to Sprint if they can get replaced for free - so they should at least check out their options even after they get it running. But however they get back in the game is what matters in the end... Glad it worked for them.
Question though: If someone gets this running and then claims TEP or warranty repair/replace will it be honored? I'm not sure since I don't have available for me and it would seem that most techs are going to say it's not hardware if they can't see it for themselves. (Versus the bootloop with the unmodified .PIT file.)
Click to expand...
Click to collapse
Most people will probably be happy it booted up. After possible weeks or days at looking at the blue light or Samsung screen... LOL
playya said:
Most people will probably be happy it booted up. After possible weeks or days at looking at the blue light or Samsung screen... LOL
Click to expand...
Click to collapse
If you can get into recovery or ODIN, your device is not bricked. At least not with this phone. Only true brick for the E4GT is the Blue-Light-Of-Death symptom.
akarol said:
If you can get into recovery or ODIN, your device is not bricked. At least not with this phone. Only true brick for the E4GT is the Blue-Light-Of-Death symptom.
Click to expand...
Click to collapse
I agree with this to the extent of the android definition of the word bricked. But that doesn't mean the phone is usable in its current state. The emmc bug cause a phone to not boot or accept a full Odin flash. So while it may get into recovery or download mode it is still pretty useless until the issue with emmc is resolved.
I also agree that people should explore their options before paying 8GB of internal memory to get their phone back up. If you can get a free replacement then that's how I would go about it.
Sent using an AOKP'd ET4G courtesy of Times_Infinity!
akarol said:
If you can get into recovery or ODIN, your device is not bricked. At least not with this phone. Only true brick for the E4GT is the Blue-Light-Of-Death symptom.
Click to expand...
Click to collapse
you obviously dont know about the emmc bug. unless the partition can be fixed and repaired now (which it may be now)...
scarmon25 said:
I agree with this to the extent of the android definition of the word bricked. But that doesn't mean the phone is usable in its current state. The emmc bug cause a phone to not boot or accept a full Odin flash. So while it may get into recovery or download mode it is still pretty useless until the issue with emmc is resolved.
I also agree that people should explore their options before paying 8GB of internal memory to get their phone back up. If you can get a free replacement then that's how I would go about it.
Sent using an AOKP'd ET4G courtesy of Times_Infinity!
Click to expand...
Click to collapse
One note from Drnull's test that does differ - the locations in memory are different for the GNote and the E4GT. His original tests noted you can bypass just the existing assignment for /data and begin reallocation from where the old one ended - resulting in only losing 2GB instead of 8GB. No one ever made a modified .PIT since most people were able to replace.
Let me see if I can track down the stock one and modify it based on those notes. I know I have it at home, just wondering if I have it here at the office...
Hey if this can help a few its better than having a paperweight sitting in your house. I agree like I said with most that exhaust all other options first. But if you have no other option and you have the same symptons as those listed to be repairable in the thread then I say go for it.
akarol said:
If you can get into recovery or ODIN, your device is not bricked. At least not with this phone. Only true brick for the E4GT is the Blue-Light-Of-Death symptom.
Click to expand...
Click to collapse
Yeah that's the same thing I said in the op of ''Stuck at Data Img'' thread.
Lol..... Kinda wish the thread would go away... brings back bad memories. ;-)
Glad tho it looks as if a resolution may have come.
Got mine working again hope it lasts
Sent from my SPH-D710 using xda premium
playya said:
I was going through the Stuck at Data.img thread and came across the post below from Jaymoon and just thought others may want to take a look at it. It looks like you can bring your phone back to life.... Hope it helps a few of you
http://forum.xda-developers.com/showpost.php?p=27852689&postcount=435
Click to expand...
Click to collapse
Hey maybe you can change the title of this to catch more brickers attention....it seems very useful and a great find. Like "possible emmc brick fix - Odin" or something.
Sent from my SPH-D710 using XDA
ive done 3 phones in a similar fashion.. but all with terminal commands.
where you can find the corrupted amount and skip it. and maybe not lose the whole 8gb. but, you have to realize, it makes things different in the future.
everytime you odin you will have to use a custom pit. you have to careful about a lot of different things going forward. one being that GB kernels will no longer recognize your partitions. (at least on hand created, converted partitions) TEP/Insurance is by far a better way to go..
dante32278 said:
Hey maybe you can change the title of this to catch more brickers attention....it seems very useful and a great find. Like "possible emmc brick fix - Odin" or something.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Thanks for the suggestion. I edited the Stuck at Data Img op.
Thank you . My phone was soft bricked , this help me I lost 8 gb but I am back on .
dante32278 said:
Hey maybe you can change the title of this to catch more brickers attention....it seems very useful and a great find. Like "possible emmc brick fix - Odin" or something.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
your wish is my command... done! Also I know some are saying the option of just using TEP and other means but lets remember some of us on here use different carriers with the ET4G and can't go back to Sprint or use TEP so this may be the only alternative for them...
I just want to bring attention to an alternative... Good Luck guys
bump for some more views
playya said:
bump for some more views
Click to expand...
Click to collapse
mid morning bump
I'm going to contact hg42 on his thread and see if he'd be willing to create a .PIT and find out what he needs to do it - I'm guessing it would be a list of each partition, starting position in memory and size.
In the meantime those of you who can't get it fixed by warranty and are using this solution - keep an eye on the eMMC discussion thread as well for updates on efforts to get a true fix for the problem.
garwynn said:
I'm going to contact hg42 on his thread and see if he'd be willing to create a .PIT and find out what he needs to do it - I'm guessing it would be a list of each partition, starting position in memory and size.
In the meantime those of you who can't get it fixed by warranty and are using this solution - keep an eye on the eMMC discussion thread as well for updates on efforts to get a true fix for the problem.
Click to expand...
Click to collapse
Thats what I am talking bout. I just bump this thread for views since I know some of the people who had issues may not check here everyday. Its getting about 200-300 views a day so at least is bringing awareness to a possible fix for some and a fix for quite a few
creating a pit is not hard i have the c source.. and anyone who has sucessfully repaired theirs can do it with heimdall..
Hi guys I flashed this rom from this thread:
http://forum.xda-developers.com/showthread.php?t=1993996
the guy posted a link to facebook with download links in there
eventually after I flashed the ROM I saw that he named the file for my phone:
Liquid JB v2.0 RC8 (D2TMO) but I flashed this one: Liquid JB v2.0 RC8 (D2ATT)
which is probably the AT&T version, first of all I wanna say to this DEV - thank you very much for not making this clear to everybody that you have different roms for 20 different phones on one spot, now my phone is bricked thanks to you, yea yea yea you flashing is your own responsibility but how you could not make this thing clear just take a look at his thread it doesn't say nowhere that the right rom for me is somewhere down there, I assumed that the link on the top is the newest for my phone.
My phone is dead now, it doesn't wanna turn on, it doesn't wanna go into download mode, it doesn't wanna go into recovery, please help.
Thank you in advice!
martybg said:
Hi guys I flashed this rom from this thread:
http://forum.xda-developers.com/showthread.php?t=1993996
the guy posted a link to facebook with download links in there
eventually after I flashed the ROM I saw that he named the file for my phone:
Liquid JB v2.0 RC8 (D2TMO) but I flashed this one: Liquid JB v2.0 RC8 (D2ATT)
which is probably the AT&T version, first of all I wanna say to this DEV - thank you very much for not making this clear to everybody that you have different roms for 20 different phones on one spot, now my phone is bricked thanks to you, yea yea yea you flashing is your own responsibility but how you could not make this thing clear just take a look at his thread it doesn't say nowhere that the right rom for me is somewhere down there, I assumed that the link on the top is the newest for my phone.
My phone is dead now, it doesn't wanna turn on, it doesn't wanna go into download mode, it doesn't wanna go into recovery, please help.
Thank you in advice!
Click to expand...
Click to collapse
Hey buddy,
I don't wanna be the bearer of bad news, however, it looks like you may have bricked your phone by flashing two roms made for other phones...
Liquid JB v2.0 RC8 (HERCULES)*
SIZE: 93 MB
MD5: 467aa4c3894e444e649fd18e7f89b6ef
MAINDL: http://bit.ly/SPAkAc
This is the one that you should have flashed. The "codename" for our phone is Hercules, you picked two roms for phones codenamed D2TMO and D2ATT (Droid 2, maybe)
I'm sorry but this is completely your fault, not the devs. About 9 links down lies a big fat HERCULES in plain text.
Call T-Mobile, get a warranty exchange, and watch this video:
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Sent from my SGH-T989 using xda premium
you know nowhere in the Thread it says that I would have all kinds of roms over there so this is the first time this thing is happening to me and I do not consider this my fault, can you please tell me how do I fix it ?
martybg said:
you know nowhere in the Thread it says that I would have all kinds of roms over there so this is the first time this thing is happening to me and I do not consider this my fault, can you please tell me how do I fix it ?
Click to expand...
Click to collapse
So you just download the first link you saw when there were clearly loads of them? What kind of logic is that??? Sorry, but people like you shouldn't be rooting and flashing. I would have stopped and made a post in the original inquiring about which was the right download. Your phone is BRICKED. There's nothing you can do except get a warranty exchange from T-Mobile. It's a painless $5 fee and you'll get your new handset next day. Hope this was a lesson learned. READ READ READ. And when in doubt if you can't find your answer by reading, ASK.
Sent from my SGH-T989 using xda premium
martybg said:
you know nowhere in the Thread it says that I would have all kinds of roms over there so this is the first time this thing is happening to me and I do not consider this my fault, can you please tell me how do I fix it ?
Click to expand...
Click to collapse
omg thats the exact same rom i flashed and frigged my phone up.i did it 4 monthes ago and have been desperately trying to fix it.no one has any idea how to fix it.baught mine out right so now i have a 600 dollar paper weight.
RushAOZ said:
So you just download the first link you saw when there were clearly loads of them? What kind of logic is that??? Sorry, but people like you shouldn't be rooting and flashing. I would have stopped and made a post in the original inquiring about which was the right download. Your phone is BRICKED. There's nothing you can do except get a warranty exchange from T-Mobile. It's a painless $5 fee and you'll get your new handset next day. Hope this was a lesson learned. READ READ READ. And when in doubt if you can't find your answer by reading, ASK.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have read that it can be fixed with JTAG is that true?
martybg said:
I have read that it can be fixed with JTAG is that true?
Click to expand...
Click to collapse
JTAG might fix it ..no guarantees though
Sent from my SGH-T989 using xda premium
martybg said:
I have read that it can be fixed with JTAG is that true?
Click to expand...
Click to collapse
Probably. But JTAG repair services are probably anywhere from $50 - $100 and a TMO warranty replacement is $25 though they will reimburse if you call and complain.
FYI... the D2TMO is the Galaxy S III for Tmobile.
I have been following the liquid jelly bean thread and I was amazed as to how many people bricked their phones by not knowing their devices code name..(Hercules) there is no difference between how the downloads are displayed and labeled in the Liquid jelly download page vs any other aosp based rom download page dont blame the developer or the OP ..just learn from it and move on
Sent from my SGH-T989 using xda premium
Yeah honestly I don't see why your so upset with the Dev, are you paying him money for the rom? Not paying attention to what your flashing IS your fault not his. The fact that you choose the first link download it, then flash means you either don't read or don't pay enough attention to what your doing.
Sorry you brick your phone hope you get it resolve but seriously learn from it and stop blaming other people for your mistakes.
Sent from my SGH-T989 using xda premium
Okay when you mean you bought yours right out. Meaning you bought in full at tmobile or from someone on craigslist ?
Sent from my SGH-T999 using xda app-developers app
Unbrick your phone by use usb JIG
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
And the d2att is the Atat galaxy SIII. If u don't go thru exchange service look up JTAG repair thru mobiletechvideo. They might be ur second chance.
Sent from my SGH-I747 using xda premium
martybg said:
I do not consider this my fault, can you please tell me how do I fix it ?
Click to expand...
Click to collapse
If you look in the ROM thread you will see that other have posted links to places to have phone repaird , some did warranty.
guys please stop, the fact that so many people bricked their devices from this single thread should'a say something right? I mean come on, i'm not crying to anybody I moved on and I'm trying to fix it, it's just that if this thing happens to you tomorrow I doubt that you would support the dev so much.
martybg said:
guys please stop, the fact that so many people bricked their devices from this single thread should'a say something right? I mean come on, i'm not crying to anybody I moved on and I'm trying to fix it, it's just that if this thing happens to you tomorrow I doubt that you would support the dev so much.
Click to expand...
Click to collapse
Actually, no. The vast majority of people on XDA manage to download and flash the correct ROM's for their phones on a daily, for some hourly, basis. These people take the time to understand not only the process involved but also the consequences. You say there were many links and it was not clear which was correct for your phone? Well, why did you not ask? There is nothing wrong with taking whatever steps necessary to protect your $500 device. If you are unsure, ask. If you, for whatever reason, are afraid to ask, don't flash.
This mentality of not taking responsibility for one's own actions has permeated so much through society it should be labeled a virus. Next time, do the research that so many others do every day, ask the questions you need to ask and you'll avoid posts like the ones in this thread as well as the frustration of a damaged device.
Good luck to you.
I did the same thing for this rom. Bricked it solid. I don't blame the dev, I blame myself. After flashing so many times, I got careless. Luckily Walmart took it back after 30 days.
Sent from my SGH-T989 using Tapatalk 2
sigsour said:
I did the same thing for this rom. Bricked it solid. I don't blame the dev, I blame myself. After flashing so many times, I got careless. Luckily Walmart took it back after 30 days.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
What's this? An individual taking responsibility and admitting oversight without casting around for someone to place the blame on?
OP could learn from you, brother.
T989, AOKP JB MS1 (KK nightly)
I don't mean to offend you or anything but you clearly downloaded a file and flashed it when it has ATT in its file name. The file is obviously for a AT&T phone and considering that you are rooted and got CWM installed on your phone you must atleast know something about your device. You should of learned that its called the "hercules" and that flashing something else would brick it. Most roms have hercules or the phone's name in the file name and that is a clear tell on how to fix it.
Lucky for you I did the same mistake except I downloaded the Galaxy S2 rom from CyanogenMod site and flashed it on my hercules (thinking all galaxys2's were the same) and then it got hard bricked. (My first attempt ever to install a rom yes I fail) but it was under the 20 day t-mobile exchange warranty and I got a brand new (not refurbished from the 1 year warranty) overnighted to me for free of charge. Your best bet would be to use the 20 day exchange if its new and the refurbished replacement if it isnt (normally cost 20$ for restocking fee, etc.) but thats good to get a phone back.
I seen someone mention that
People have been labeling tw roms and aosp roms incorrectly,There have been an unusual amount of brick topics lately, anyone else wondering if we are dealing with standard "flashing" user error, or actual misleading info on certain roms . Many of the most novice to longtime xda members have even been bricking over the stupidist stuff.
This device t999 specifically
bricking this(any) phone by flashing an incorrect rom isnt that easy to be honest... plus the worst that can happen by flashing is usually a softbrick a.k.a bootloop. (unless your an idiot and you flash stuff from a different device)
i mean i may just be way too experienced after 8 years of hacking away at android, but its not simple to brick a phone. its usually caused by lack of attention. for example, most people dont even read the OP of roms threads the whole way. they just download and flash and come back and say "why doesnt this work?"
im also curious how many people actually tried to use ODIN to restore there phone before they proclaimed "hard brick"
ziggy46 said:
i mean i may just be way too experienced after 8 years of hacking away at android, but its not simple to brick a phone.
Click to expand...
Click to collapse
I have literally 4.5 months of experience with Android and I feel the way you do so I think it's largely lack of paying attention or not doing the research and reading first. I've tried multiple ROMs on my phone and I've helped friends learn how to root and understand the process of installing ROMs and no one has had a brick yet.
If you jump out of an airplane without learning how to use your parachute what do you expect ?
The S3 most likely has a high number of bricks because it has a huge user-base - thus even if the proportions are the same as other devices there are more people by number who are trying things without knowing what they're doing and those people are going to end up with bricks.
I've certainly seen times when the ROM was to blame, but it's almost always not a hard brick. That's the chance you take with installing a custom ROM - sometimes there are bugs and stuff happens. If you can't accept that possibility don't flash.
Pennycake said:
I have literally 4.5 months of experience with Android and I feel the way you do so I think it's largely lack of paying attention or not doing the research and reading first. I've tried multiple ROMs on my phone and I've helped friends learn how to root and understand the process of installing ROMs and no one has had a brick yet.
If you jump out of an airplane without learning how to use your parachute what do you expect ?
The S3 most likely has a high number of bricks because it has a huge user-base - thus even if the proportions are the same as other devices there are more people by number who are trying things without knowing what they're doing and those people are going to end up with bricks.
I've certainly seen times when the ROM was to blame, but it's almost always not a hard brick. That's the chance you take with installing a custom ROM - sometimes there are bugs and stuff happens. If you can't accept that possibility don't flash.
Click to expand...
Click to collapse
ahh the userbase! thats a good one thanks for pointing it out. i also believe that users from other variants end up here and flash the incorrect rom by google-ing "roms for s3" and going to the first xda link they see. which may lead to flashing improper roms resulting in the $400 paper weight
999 times out of 1000 it's user error.
DaMn NoObS
Sent from my SGH-T999 using Tapatalk 2
Yes user error is to blame nobody likes to search or even read for that matter
Reading fixes 99.999% of all common newb problems
Sent from my SGH-T999 using Tapatalk 2
If anyone hard bricks this device they deserve it. You literally almost have to intentionally try to brick in order to do so.
On another note... I haven't seen many brick threads with ppl that actually broke their devices
Sent from my SGH-T999 using Tapatalk 2
Most brick threads I've seen lately are either softbricks, boot loops or not bricked at all, just errors from dirty flashing.
Sent from my SGH-T999 using xda premium
ziggy46 said:
ahh the userbase! thats a good one thanks for pointing it out. i also believe that users from other variants end up here and flash the incorrect rom by google-ing "roms for s3" and going to the first xda link they see. which may lead to flashing improper roms resulting in the $400 paper weight
Click to expand...
Click to collapse
+1 i definitely agree with what you said. my friend searched on google "how to root galaxy s3" attempting to root her AT&T GS3, and almost ended up with a brick (she found an international s3 root method) had she not came and asked me first...phew that was close.
It's just called common sense, not many have it.
Most I have seen are soft breaks and user panics before either: clearing cachy and factory reset or Odin. They just jump straight to I have a break.
Sent from my SGH-T999 using xda premium
Name of post should be "Strange amount of idiots bricking their phones"
Sent from Flip's S3
ziggy46 said:
bricking this(any) phone by flashing an incorrect rom isnt that easy to be honest... plus the worst that can happen by flashing is usually a softbrick a.k.a bootloop. (unless your an idiot and you flash stuff from a different device)
i mean i may just be way too experienced after 8 years of hacking away at android, but its not simple to brick a phone. its usually caused by lack of attention. for example, most people dont even read the OP of roms threads the whole way. they just download and flash and come back and say "why doesnt this work?"
im also curious how many people actually tried to use ODIN to restore there phone before they proclaimed "hard brick"
Click to expand...
Click to collapse
Wow bro 8 years of android hacking? Can I borrow your flux capacitor? First android phone released 10/2008
sbell7105 said:
Wow bro 8 years of android hacking? Can I borrow your flux capacitor? First android phone released 10/2008
Click to expand...
Click to collapse
i over-exaggerated a little its actually only about 5 years... im 16 now and i started when i was 10-11ish
ziggy46 said:
i over-exaggerated a little its actually only about 5 years... im 16 now and i started when i was 10-11ish
Click to expand...
Click to collapse
Aww man 16? does that mean I wasted my flux capacitor reference? Just messing around I figured it was a typo or something I just couldn't resist :laugh:
NoOooOoOObs
ziggy46 said:
bricking this(any) phone by flashing an incorrect rom isnt that easy to be honest... plus the worst that can happen by flashing is usually a softbrick a.k.a bootloop. (unless your an idiot and you flash stuff from a different device).........
im also curious how many people actually tried to use ODIN to restore there phone before they proclaimed "hard brick"
Click to expand...
Click to collapse
I'm one. (lol)
Aerowinder said:
999 times out of 1000 it's user error.
Click to expand...
Click to collapse
bfranklin1986 said:
DaMn NoObS
Click to expand...
Click to collapse
Google and XDA Premium have been my friend throughout my past few years with T-Mobile... since the days of my Behold, Memoir, Samsung Galaxy S 4g, and now my SGS3... I've found a great piece of mind in knowing I'm not a complete idiot, nor am I the first to screw something up.
And while I have made a few devices "boot-loop" from time to time, rooting is easy as pie. And if you happen to research before you do any job, you might learn a thing or two. I specifically love the threads (on any forum, not just here) where someone posts "READ CAREFULLY" followed by "DOWNLOAD LINK" and just two or three replies later, there has to be that one r-tard that asks "What do I do? Where's the download link? I'm so confused!". I want to piss in their coffee and break their mug over their face. Literacy is depleting; and there's little we can do about it.
sbell7105 said:
Wow bro 8 years of android hacking? Can I borrow your flux capacitor? First android phone released 10/2008
Click to expand...
Click to collapse
Hilarious!
Things have gotten so much easier. My only brick was a g1 (HTC dream). Things were a lot trickier then. It had an IPL-initial program loader (bootloader) and an SPL-secondary program loader (radio). Some roms required the bootloader from the the HTC magic (mytouch3g). Not all dream radios were compatible with the magic bootloader. So you always flashed a magic compatible radio first then bootloader. One night when it was really late, I was repeating the flash I had already done I my own g1 but on my wife's g1 this time. I accidentally reversed the order and BOOM, hard brick. In that state, the ipl can't hand off to the spl. Only option was hardware jtag that hadn't been discovered yet.
She was pissed.
Sent from my SGH-T999
Remember when I rooted my first (lg optimus v) I thought with a recovery I could flash any Rom...thankfully I have learned otherwise and didn't have to learn by looking like an idiot.I came very close to flashing some random Rom probably from the evo4G
Fortunately laziness actually served me well lol
Sent from my SGH-T999 using xda premium
Although I wouldn't term myself a pro at all, I am not a noob when it comes to rooting and installing other ROMs. I have rooted many of my Android phones over the years and have diligently read and re-read posts when it comes to rooting and installing ClockworkMod recovery and other ROMs.
Last week, I made a big boo-boo!
I searched for "Sprint SGS3 alternate ROMs" and found a CNet article (http://reviews.cnet.co.uk/mobile-phones/top-5-samsung-galaxy-s3-custom-roms-50009440/) listing the different ROMs. I downloaded a couple (Hawkish and Energy) and promptly tried to install them. I got some error message in CWM. I then rebooted after cleaning caches, dalvik etc.
My phone wouldn't start at all!!!
I tried all the keypresses to get things working but absolutely nothing. The unit wouldn't turn on even with a separately fully charged battery. I tried to borrow a USB Jig from a user in this post (http://forum.xda-developers.com/showthread.php?t=1869203) but no-one was able to help. As the phone was my only phone (no landline) I was readying myself to pay the $60 that one of the other sites charged to JTag the unit.
Before I did that, I decided to take it in to Sprint, and told the technician I made a mess up. They didn't ask anything about what I did and took it to the back for about half an hour. They weren't able to do anything as the unit didn't switch on, but said that I could get a replacement for $50.
I did that and a few days later they swapped out the non-working unit for a working one. I was expecting to pay a whole lot more.
I learned the lesson the hard way: even if I search for "Sprint" the results aren't necessarily going to be for my unit. I should have read (and re-read!) the posts a whole lot more clearly about the other ROMs - they were not for the Sprint unit.
I hope my hard lesson will help others be a wee bit more cautious - even if you have been customizing a long time!
This is about the 100th post this month of people flashing roms for other carriers on a Sprint S3. A simple search in the Q&A would have probably alerted you to the facts.
Transmitted with a portable device using Xparent Blue Tapatalk 2
I *do* realize that I flashed the wrong ROM. The point of my post was to illuminate that it's not only noobies who get things wrong.
Even though I read what I thought was for Sprint, my presumption got in the way and I didn't realize until it was too late that it was not the ROM in the Sprint section of Http://www.xda-developers.com/ that I thought I was reading about.
I took responsibility for my mistake and paid the money to rectify my error.
I am hoping that my misfortune with be a cautionary tale for others to double (and triple) check.
Just because we've done things successfully many times before doesn't mean we're avert to the same errors as noobies.
IconBoy said:
I *do* realize that I flashed the wrong ROM. The point of my post was to illuminate that it's not only noobies who get things wrong.
Even though I read what I thought was for Sprint, my presumption got in the way and I didn't realize until it was too late that it was not the ROM in the Sprint section of Http://www.xda-developers.com/ that I thought I was reading about.
I took responsibility for my mistake and paid the money to rectify my error.
I am hoping that my misfortune with be a cautionary tale for others to double (and triple) check.
Just because we've done things successfully many times before doesn't mean we're avert to the same errors as noobies.
Click to expand...
Click to collapse
If you would've read more carefully you wouldn't have made that mistake... noob! Jk
SPRINT GS3 FAQ
Feel bad but at the same time I dont. You should know a bit better to be sure that you can use that ROM/kernel/zip etc. If you doubt yourself ask in the thread or forum. We all don't know everything there is to rooting and flashing
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png
Odexed Blue by Strong Steve + Ktoonz w/ Team Kernelizers tweaks
In the cnet article it had this in the "getting started section"
Just bear in mind that if your S3 handset is not version number I9300 -- and it almost certainly is if you bought it in the UK -- then bad things can happen. So it's worth quickly checking your phone's settings before proceeding.
Click to expand...
Click to collapse
Discuss...
Sent from my SPH-L710 using xda app-developers app
I have to give you credit Iconboy for taking responsibility and paying for a new phone. Even though you messed up you admitted it. A lot of people that have done the same thing have posted things like "can I throw my phone in a river" or "can I just tell sprint that the OTA broke my phone". Thanks for doing it right.
metalfan78 said:
I have to give you credit Iconboy for taking responsibility and paying for a new phone. Even though you messed up you admitted it. A lot of people that have done the same thing have posted things like "can I throw my phone in a river" or "can I just tell sprint that the OTA broke my phone". Thanks for doing it right.
Click to expand...
Click to collapse
Yeah I agree. I don't know why people are bashing him. He maned up and payed for a replacement phone and now he is just letting other people know what can happen.
Sent from my SPH-L900 using xda premium
I did the same thing with my S3 about a month ago, Was on a flashing frenzy and didn't read enough about the rom i was flashing. After the flash my phone wouldn't do anything at all, just a paperweight. Took it into sprint and paid for a new one. Mistake learned, its part of being human.
musclehead84 said:
Yeah I agree. I don't know why people are bashing him. He maned up and payed for a replacement phone and now he is just letting other people know what can happen.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
No one is bashing him, just having some fun at his expense, but you're right, thanks for doing the right thing op!
SPRINT GS3 FAQ
Like others have said, props for owning your mistake. However, the "noob" label applies to you, whether you think so or not. There were so many signs you were walking down the wrong path (including an explicit warning on the very page) the very first being that you were on a .uk website. I'm not posting this about that though, I just don't seem to understand why so many people feel the need to venture away from xda to acquire ROMs, this site if full of great ROMs made by great devs, not sure what more people need to end up flashing things they find on international news sites. Yes, there are other established sites, but usually they overlap with this site. That is to say, if there's something awesome happening somewhere else, you'll hear about it here (with a few exceptions).
Whether I am classified as a "noob" or not ... I have flashed custom ROMs on four or five different Android phones over the years.
The Motorola Photon was one where I thought I had a paperweight (nope...not an int'l ROM that time - Ha! Ha!) but because of XDA, I was able to get it working again after many errors. Decent little phone that one.
My error, my expense, my fault on the SGS3. Thankfully I have a working unit and can put the old EVO in the drawer as a backup - it is sloooow!
IconBoy said:
Whether I am classified as a "noob" or not ... I have flashed custom ROMs on four or five different Android phones over the years.
The Motorola Photon was one where I thought I had a paperweight (nope...not an int'l ROM that time - Ha! Ha!) but because of XDA, I was able to get it working again after many errors. Decent little phone that one.
My error, my expense, my fault on the SGS3. Thankfully I have a working unit and can put the old EVO in the drawer as a backup - it is sloooow!
Click to expand...
Click to collapse
Glad you got it worked out. Its not easy admitting (and on the internet to say the least) that you had made a mistake even as a seasoned flasher. Its never easy to admit an error, at all
I agree with metalfan above and I applaud you, you made a mistake and you paid for it, lesson learned
Well... Don't re-read is for noobs. Sorry if that hurts you.
Sent from my SPH-L710
IconBoy said:
Whether I am classified as a "noob" or not ... I have flashed custom ROMs on four or five different Android phones over the years.
The Motorola Photon was one where I thought I had a paperweight (nope...not an int'l ROM that time - Ha! Ha!) but because of XDA, I was able to get it working again after many errors. Decent little phone that one.
My error, my expense, my fault on the SGS3. Thankfully I have a working unit and can put the old EVO in the drawer as a backup - it is sloooow!
Click to expand...
Click to collapse
You may not be a "noob" in the technical sense of that term, but as you already know, the mistake you made was an amateurish one. For one, you were on a .uk website, and second, the very article mentions that you have to be mindful of your model number and specifically mentions buying in the UK. There were at least 3 checkpoints in that article that should have prompted further scrutiny on your part. I do commend you for taking responsibility for your actions and for you PSA to be careful about what you flash, and I do understand how you got tripped up. This is probably the first Android phone that was released to multiple carriers worldwide. Also, what I would like to see from devs is a conspicuous message in the OP of their ROM about specifically which carrier/version their ROM is for. Often that is not mentioned.
So let me prose this question to everyone calling him a noob (including our devs) - why don't devs write their install scripts to read the current build.prop to check for the correct model before the wipe & install begins? If this is happening hundreds of times per month, a pretty small amount of scripting could probably stop this from happening 99% of the time.
Sent from my SPH-L710 using xda app-developers app
rocket321 said:
So let me prose this question to everyone calling him a noob (including our devs) - why don't devs write their install scripts to read the current build.prop to check for the correct model before the wipe & install begins? If this is happening hundreds of times per month, a pretty small amount of scripting could probably stop this from happening 99% of the time.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Good point. Bad code leads to bad problems. And its actually a very simple line of code in the updater-script that would abort, but increasingly people are dropping that habit and changing to a no-check install
Code:
assert(getprop("ro.product.device")=="DEVICE_NAME" && getprop("ro.product.board")=="DEVICE_NAME")
IconBoy said:
Although I wouldn't term myself a pro at all, I am not a noob when it comes to rooting and installing other ROMs. I have rooted many of my Android phones over the years and have diligently read and re-read posts when it comes to rooting and installing ClockworkMod recovery and other ROMs.
Last week, I made a big boo-boo!
I searched for "Sprint SGS3 alternate ROMs" and found a CNet article (http://reviews.cnet.co.uk/mobile-phones/top-5-samsung-galaxy-s3-custom-roms-50009440/) listing the different ROMs. I downloaded a couple (Hawkish and Energy) and promptly tried to install them. I got some error message in CWM. I then rebooted after cleaning caches, dalvik etc.
My phone wouldn't start at all!!!
I tried all the keypresses to get things working but absolutely nothing. The unit wouldn't turn on even with a separately fully charged battery. I tried to borrow a USB Jig from a user in this post (http://forum.xda-developers.com/showthread.php?t=1869203) but no-one was able to help. As the phone was my only phone (no landline) I was readying myself to pay the $60 that one of the other sites charged to JTag the unit.
Before I did that, I decided to take it in to Sprint, and told the technician I made a mess up. They didn't ask anything about what I did and took it to the back for about half an hour. They weren't able to do anything as the unit didn't switch on, but said that I could get a replacement for $50.
I did that and a few days later they swapped out the non-working unit for a working one. I was expecting to pay a whole lot more.
I learned the lesson the hard way: even if I search for "Sprint" the results aren't necessarily going to be for my unit. I should have read (and re-read!) the posts a whole lot more clearly about the other ROMs - they were not for the Sprint unit.
I hope my hard lesson will help others be a wee bit more cautious - even if you have been customizing a long time!
Click to expand...
Click to collapse
I'd say your a noob. Title is wrong. Lol.
.co.uk <----- not even us website.
Did you see "sprint" or d2spr any where? No.
Derp.
Sent from my SPH-L710 using xda premium
rocket321 said:
So let me prose this question to everyone calling him a noob (including our devs) - why don't devs write their install scripts to read the current build.prop to check for the correct model before the wipe & install begins? If this is happening hundreds of times per month, a pretty small amount of scripting could probably stop this from happening 99% of the time.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
How about a counter point, if the noobs would read before flashing, it would stop this from happening 100% of the time! If you don't have time to read before trying to mod your device, you shouldn't be doing it in the first place...
Will always wonder why people find the right place just a second after they turn theirs phones into a fully functional brick.
Sent from my SPH-L710
I FIXED IT
Here's the Link to my Guide.
http://forum.xda-developers.com/showthread.php?t=2369125
Okay, So here's what I did.
I flashed the latest Illusions ROM for my S3 and the Slim AIO 7 for 4.2.2 (since Illusions is based out of SLIM, AOKP, PA, CM, ETC). Then TWRP 2.6.0.0 said that SuperSu wasn't installed (what the heck?!?!?) and it prompted me to install su so I was like "What the heck, why not" so I swiped for yes. Then the screen went black for a good 20 minutes. I got worried, did a battery pull and tried to but straight to recovery... no bueno. Same for booting to dl mode. I plugged my phone in to my computer without the battery and the red LED comes on for 10 seconds and then it dies. It prompted windows to install the QHUSB_DL driver and it failed. WHAT THE HECK JUST HAPPENED?!?
Is there anything I can do to unbrick it?
Do I have to JTAG/JIG or what? If so, can anyone direct me to it? (Last resort)
I'm on the MD4 bootloader and modem.
I really need to get this phone fixed before I go to basic on the 23rd of July.
Other info: Yes, I already went to the local Sprint store (not to get a replacement. That would be irresponsible of me considering my S3 is built by me from the MoBo on up) to get help on flashing it back to stock.
Jtag is the only way and you need to send it to someone who does that.
Sent from the future via Tapatalk 4
deBricker said:
Okay, So here's what I did.
I flashed the latest Illusions ROM for my S3 and the Slim AIO 7 for 4.2.2 (since Illusions is based out of SLIM, AOKP, PA, CM, ETC). Then TWRP 2.6.0.0 said that SuperSu wasn't installed (what the heck?!?!?) and it prompted me to install su so I was like "What the heck, why not" so I swiped for yes. Then the screen went black for a good 20 minutes. I got worried, did a battery pull and tried to but straight to recovery... no bueno. Same for booting to dl mode. I plugged my phone in to my computer without the battery and the red LED comes on for 10 seconds and then it dies. It prompted windows to install the QHUSB_DL driver and it failed. WHAT THE HECK JUST HAPPENED?!?
Is there anything I can do to unbrick it?
Do I have to JTAG/JIG or what? If so, can anyone direct me to it? (Last resort)
I'm on the MD4 bootloader and modem.
I really need to get this phone fixed before I go to basic on the 23rd of July.
Other info: Yes, I already went to the local Sprint store (not to get a replacement. That would be irresponsible of me considering my S3 is built by me from the MoBo on up) to get help on flashing it back to stock.
Click to expand...
Click to collapse
I take it that post I linked to in my thread didnt work then?
And FYI
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
What was the name of the file for Illusion ROM?
Sent from my SPH-L710 using xda app-developers app
Notorious said:
What was the name of the file for Illusion ROM?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
FML, I made a noob mistake. Flashed a i9300 Illusion Rom. But I got it from the link on the page. It's Illusion i9300 4.2.2 07132013
billard412 said:
I take it that post I linked to in my thread didnt work then?
And FYI
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Click to expand...
Click to collapse
No. Looks like I'm going back to my ogEvo. Won't be able to use that service until after the Navy is done with me. FML. I still can't believe I made a noob mistake. -_____- I have never bricked a phone and this is ironic because i usually de-brick phones... not brick 'em.
Have you looked at this thread
[HOW TO] Unbrick your Sprint phone from flashing an International gsm boot imag
jdelano said:
Have you looked at this thread
[HOW TO] Unbrick your Sprint phone from flashing an International gsm boot imag
Click to expand...
Click to collapse
I JUST FIXED IT! LOL. I'm in the middle of Barnes and noble and I just fixed it. I'll put down directions for a HOW TO for my method, but it involves having Linux.
HARD BRICK FIX W/O THE JTAG!
and I'll have to give credit. I finally figured out how to dd that file that was posted by (I don't have his username atm) but yeah! I got it to work. His method needs a little more instruction.
Just booted to DL mode
Yeah, if I may, please don't make a guide thread for that. It will only encourage people to flash international roms.
Sent from my S3 on Sense 5 (you jelly?)
glad to hear you got it working.
CNexus said:
Yeah, if I may, please don't make a guide thread for that. It will only encourage people to flash international roms.
Sent from my S3 on Sense 5 (you jelly?)
Click to expand...
Click to collapse
Yes, well, some people would like the convenience of not having to send their phone off and spending 60 dollars to get it fixed. And there are many ways to hard brick an S3 and I think that this would be a convenient way of fixing their phone.
Mine was a legit mistake. I'm a veteran flasher of ROMs and everyone does slip up.
deBricker said:
Yes, well, some people would like the convenience of not having to send their phone off and spending 60 dollars to get it fixed. And there are many ways to hard brick an S3 and I think that this would be a convenient way of fixing their phone.
Mine was a legit mistake. I'm a veteran flasher of ROMs and everyone does slip up.
Click to expand...
Click to collapse
Well if you do something like that, you should own up to it and pay the $60 bucks to get it fixed. International roms don't magically wind up on your flashing queue in recovery.
I obviously can't stop you from posting anything, but just keep that in mind.
Good day.
CNexus said:
Well if you do something like that, you should own up to it and pay the $60 bucks to get it fixed. International roms don't magically wind up on your flashing queue in recovery.
I obviously can't stop you from posting anything, but just keep that in mind.
Good day.
Click to expand...
Click to collapse
Yes, well. I can't exactly do that since I'm in the Navy and I'm going to be gone for the next two months. I prefer to find a method BEFORE paying the 60 dollars to unbrick. Dude, this to help everyone. YES I MADE A MISTAKE. We all do. I understand its frustrating. Even I get frustrated. But why should I pay 60 dollars to have someone else fix my phone when I can fix it myself? I'm not a noob at flashing.
deBricker said:
Yes, well. I can't exactly do that since I'm in the Navy and I'm going to be gone for the next two months. I prefer to find a method BEFORE paying the 60 dollars to unbrick. Dude, this to help everyone. YES I MADE A MISTAKE. We all do. I understand its frustrating. Even I get frustrated. But why should I pay 60 dollars to have someone else fix my phone when I can fix it myself? I'm not a noob at flashing.
Click to expand...
Click to collapse
It's a fine line we walk... We here at XDA want to be helpful to "noobs," but we also want to express the importance of reading and critical thinking before acting.
This argument came up a month or two ago. There's an easy way to make the ROMs check the phone model prior to flashing. This would be a great way to prevent hard-bricks, as the installation will abort on the wrong device. The issue that arises is two-fold:
1) There are many Devs and not all will implement this device check.
2) People will start getting lazy with their flashing, as it seems "idiot proof."
We are actually seeing this with the newest CM10.1 releases. Despite it being clearly spelled out in installation threads (if they read the last 3-4 pages of the thread), a lot of people are trying to flash them without updating their bootloader. They then get the infamous system 7 error. I was answering threads one after the next with people asking the exact same question about the system 7 error. A simple 5-minute perusal of the forums (or even just the CM thread) would've yielded the results, but people don't want to put in the "hard work."
In the case of hard-bricks and your guide, I don't fully agree with CNexus (it happens from time-to-time, but he's a quality guy and dev). If it works a good percentage of the time, I think it's a valuable tool that can help a lot of people. That being said, one of the "good" things about a hard-brick is that people generally learn their lesson after one. I've seen people here on XDA that hard-bricked their device (due to carelessness), had to get it JTAG-ed, then came back to become advocates for reading the posts/directions thoroughly. It's amazing how $60 and losing your phone for a week will make people a lot more sober about flashing a Rom.
I don't doubt for a minute that having an "easy" fix for hard-bricks will reduce the impact of this lesson.
That being said, I also believe that having this guide is a good thing. My recommendation would be to rewrite the beginning of the guide to include a strong disclaimer about the dangers of flashing a Rom not meant for your device. I understand that you're trying to take the approach of "hey, we are all noobs at times, it's not that big of a deal," but I think it'll reinforce the lazy mentality of a good number of flashers.
Just my two cents. I'm glad you were able to fix your phone and to find a way to boot into download mode from the SD card so you can rewrite the bootloader partition from Odin.