Develop Bugs

[Q] Can someone help me fix my S3?

Samsung Galaxy S3 - T-Mobile (SGH-T999)
Android Version: 4.2.2
Baseband version T999UVDLJC
Kernel Version:
3.4.53-cyanogenmod-g8d6f740
[email protected] #1
LiquidSmooth version:
Liquid-JB-v2.9-Official
Build number:
liquid_dtmo-userdebug 4.2.2 JDQ39E
end.liquid.20130720.042519 test-keys
This was my second time rooting and installing a ROM on my phone. Whatever I had used originally seemed a bit buggy so I went back to stock. However, this time I wanted to try PACMAN and after installing it I found that I couldn't send picture messages and I no longer had access to 4G data speeds. I didn't know what to do, searched the web for a few days looking for ideas and saw some people saying that maybe I should change my ROM, so I did. I tried Cyanogen Mod 10.1 (I think) and then LiquidSmooth 2.9 (where I am now). None of the changes made anything work. So, now I've seen someone talk about radios, I don't quite understand what they are saying but from what I've gathered there could be a different radio for me to download. If that's the case, I'm not sure how to do it. Also, I was told to try and put the stock software back on the phone and I can't figure out how to do that again either. I probably dug a little too deep being such a noob but I wanted to learn. If anybody could help I'd be greatly appreciative.
Also, if there is any other information you need please let me know. I just copied everything I could find under "About Phone"

Take out battery and reply with the model number of the phone.

bralaheh said:
Samsung Galaxy S3 - T-Mobile (SGH-T999)
Android Version: 4.2.2
Baseband version T999UVDLJC
Kernel Version:
3.4.53-cyanogenmod-g8d6f740
[email protected] #1
LiquidSmooth version:
Liquid-JB-v2.9-Official
Build number:
liquid_dtmo-userdebug 4.2.2 JDQ39E
end.liquid.20130720.042519 test-keys
This was my second time rooting and installing a ROM on my phone. Whatever I had used originally seemed a bit buggy so I went back to stock. However, this time I wanted to try PACMAN and after installing it I found that I couldn't send picture messages and I no longer had access to 4G data speeds. I didn't know what to do, searched the web for a few days looking for ideas and saw some people saying that maybe I should change my ROM, so I did. I tried Cyanogen Mod 10.1 (I think) and then LiquidSmooth 2.9 (where I am now). None of the changes made anything work. So, now I've seen someone talk about radios, I don't quite understand what they are saying but from what I've gathered there could be a different radio for me to download. If that's the case, I'm not sure how to do it. Also, I was told to try and put the stock software back on the phone and I can't figure out how to do that again either. I probably dug a little too deep being such a noob but I wanted to learn. If anybody could help I'd be greatly appreciative.
Also, if there is any other information you need please let me know. I just copied everything I could find under "About Phone"
Click to expand...
Click to collapse
Go to about and see if you have imei=0
Sent from my GT-P7510 using Tapatalk 4

Aerowinder said:
Take out battery and reply with the model number of the phone.
Click to expand...
Click to collapse
The model number is SGH-T999

itsamti said:
Go to about and see if you have imei=0
Sent from my GT-P7510 using Tapatalk 4
Click to expand...
Click to collapse
The IMEI does say IMEI=0...What does that mean?!

bralaheh said:
The IMEI does say IMEI=0...What does that mean?!
Click to expand...
Click to collapse
It means you need to check your PM inbox! :thumbup:
And when you are done with this, I suggest you read the firmware and modem threads linked in my sig if you want to learn a little more.
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
It means you need to check your PM inbox! :thumbup:
And when you are done with this, I suggest you read the firmware and modem threads linked in my sig if you want to learn a little more.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks a lot Doc!

[Q] Galaxy Tab 3 10.1 Model GT-P5210 Variant rooting

Hello. I JUST bought a Samsung Galaxy Tab 3 10.1 Model GT-P5210 and I want to root it.
It has Android version: 4.2.2 OUT OF THE BOX.
Kernel is: 3.4.34-850131
[email protected] #1
Fri Aug 2 11:49:36 KST 2013
Build Number: JDQ39.P5210UEUAMH1
Will the root instructions listed here A: Work?
B: Leave the version at 4.2.2?
C: Is there a Un-Root also available?
Thanks!

What ! It has 4.2.2 out of the box ?
AFAIK the latest version of android this tab has is 4.1.2 so that is pretty awesome
http://forum.xda-developers.com/showthread.php?t=2432467
^the above thread should help you
To unroot you can just flash back to stock

Links dead
Nitro_123 said:
What ! It has 4.2.2 out of the box ?
AFAIK the latest version of android this tab has is 4.1.2 so that is pretty awesome
http://forum.xda-developers.com/showthread.php?t=2432467
^the above thread should help you
To unroot you can just flash back to stock
Click to expand...
Click to collapse
Except the links to files in that post are dead.

JeffWNC1 said:
Except the links to files in that post are dead.
Click to expand...
Click to collapse
The links were updated by a person in the thread. Please check post 240
http://roms.bindroid.com/downloads/viewcategory/4-galaxy-tab3-p5210
^better

unlocked by Tmobile

i have the t mobile SGH-T889 which has been unlocked by tmobile.
im now running the AT&T sim card......
is there anyway for me to install the
AT&T SGH-I317 firmware on the tmobile SGH-T889 ?
it already has the 4.3 firmware...

SaTxCowboy said:
i have the t mobile SGH-T889 which has been unlocked by tmobile.
im now running the AT&T sim card......
is there anyway for me to install the
AT&T SGH-I317 firmware on the tmobile SGH-T889 ?
it already has the 4.3 firmware...
Click to expand...
Click to collapse
Just make certain you don't flash the AT&T modem. There are AT&T roms available on their subforum.
You should be fine.

ATT
Coug76 said:
Just make certain you don't flash the AT&T modem. There are AT&T roms available on their subforum.
You should be fine.
Click to expand...
Click to collapse
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !

SaTxCowboy said:
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
Click to expand...
Click to collapse
You can always edit your build prop to show different carrier, device, etc..

SaTxCowboy said:
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
Click to expand...
Click to collapse
Yup. That is a build.prop edit to change the N7105. There is a T889 and a I317 LS.

DS-NE5v1 rom
ok. im now running the DS-NE5v1 rom...
its a very good rom....but is there away i can change the AT&T boot screen ?
its jes a white back ground wif tha AT&T logo on the center ?
i would like to have AT&T animated one from firmware 4.1.2.......its animated.....
what do i do now ?
or jes leave it b !!!

AT&T
i would like to have this on my SGH-T889.unlocked and rooted...
what do i have to do ?
Android version: 4.4.2
Baseband version: T889UVUCMK7
Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014
is it possible ?
tmobile said the 4.3 is the final for the SGH-T889 !!!!

what program
Coug76 said:
Yup. That is a build.prop edit to change the N7105. There is a T889 and a I317 LS.
Click to expand...
Click to collapse
what program do i use to change it..build.prop ?

SaTxCowboy said:
what program do i use to change it..build.prop ?
Click to expand...
Click to collapse
Buildprop editor from play store

wifi calling
mexigga said:
Buildprop editor from play store[/QUOT
how do i enable wifi calling ?
on a SGH-T889 rooted & flashed to SGH-I317 ?
Click to expand...
Click to collapse

wifi calling only works on t-mobile touch wiz roms. ie jedi x 2. any aosp roms such as cm11, jedi open source(built off cm11), carbon, aokp won't have wifi calling

changed kernel
i have no idea what happend with the Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014.....
i redid my cell 2 get more space after awhile......
but when i put the same ROM (i think) the i317-cwm-ucucne5-rooted-deodex.
but when i installed it.....my modem was already working, but my camera dont work...
it says camera failed....
i checked the kernel and it has india in it ?
i even tried the cwm-i317-ucucne5-kernel.
which got stuck at the att boot screen for over 15 minutes ?

HELP !!!
SaTxCowboy said:
i would like to have this on my SGH-T889.unlocked and rooted...
what do i have to do ?
Android version: 4.4.2
Baseband version: T889UVUCMK7
Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014
is it possible ?
tmobile said the 4.3 is the final for the SGH-T889 !!!!
Click to expand...
Click to collapse
after days of searching......
i cant seem 2 find the Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014 ???
any help will b grateful....
thx

SaTxCowboy said:
mexigga said:
Buildprop editor from play store[/QUOT
how do i enable wifi calling ?
on a SGH-T889 rooted & flashed to SGH-I317 ?
Click to expand...
Click to collapse
These rom questions are great questions but they belong in the forum for the ROM you are running. However, you CANNOT get wifi calling from the AT&T Rom. It will only work on the T-Mobile stock ROM or developer ROMS that have used the T-Mo stock Rom Base. Jedi Master X2 comes to mind.
Please post any other of your questions for the rom you are running in its appropriate forum. I believe you will have better luck. Below is the link to the Ditto Note 3 forum. Good Luck!
http://forum.xda-developers.com/showthread.php?t=2541860
Click to expand...
Click to collapse

[Q&A] [PHILZ][SM-N750][UNOFFICIAL][hl3g][4.4.2-based] RECOVERY [BUILD 3]

Q&A for [PHILZ][SM-N750][UNOFFICIAL][hl3g][4.4.2-based] RECOVERY [BUILD 3]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PHILZ][SM-N750][UNOFFICIAL][hl3g][4.4.2-based] RECOVERY [BUILD 3]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Works on Note 3 Neo SM-N7505
Hi
I tested out your recovery on my Samsung Galaxy Note 3 Neo SM-N7505 running a rooted Android 4.4.2. Clearing Cache and Dalvik Cache works just fine. Backup to/restore from internal storage works fine too. When trying to backup on external storage the device reboots after 1-3 minutes.
I am going to test out the other features as well when ive got time to do that
Hope i could help you
Good Night from Southtirol, Italy = )

Thanx for the review.. Il try to fix the backup and restore asap

SD card not detected with build 4
I flashed the build 4 and now the SD card is not getting detected by windows once I plug the phone in via USB. SD card is detected in the phone.
How do I flash SuperSU?
I have the SM-N750

Hi rutvikrvr.
Thanks for CWM for SM-N7502
But it isn't work for my phone ... can u please modify to can be compatible for my phone
These are my phone informations…..
Model: SM-N7502
Android: 4.3
Baseband Version: N7502XXUANC1
Kernel Version: 3.4.0-2573744
[email protected] #1
Fri Mar 7 11:26:13 KST 2014
Build Number: JLS36C. N7502XXUANC3
SE for Android status:
Enforcing
SEPF_SM-N7502_4.3_0023

aaboism said:
Hi rutvikrvr.
Thanks for CWM for SM-N7502
But it isn't work for my phone ... can u please modify to can be compatible for my phone
These are my phone informations…..
Model: SM-N7502
Android: 4.3
Baseband Version: N7502XXUANC1
Kernel Version: 3.4.0-2573744
[email protected] #1
Fri Mar 7 11:26:13 KST 2014
Build Number: JLS36C. N7502XXUANC3
SE for Android status:
Enforcing
SEPF_SM-N7502_4.3_0023
Click to expand...
Click to collapse
what do you mean it's not working ..what's the problem/error???????
Did you follow the procedure in the first post properly ?
By the way ..this recovery is for SM-n750 not SM-N7502 .. there's another thread for that

rutvikrvr said:
what do you mean it's not working ..what's the problem/error???????
Did you follow the procedure in the first post properly ?
By the way ..this recovery is for SM-n750 not SM-N7502 .. there's another thread for that
Click to expand...
Click to collapse
Thanks again for reply
my phone is SM-N7502 .. and i followed the procedure exactly as u said ..
But when i tried for example " backup to /sdcard " it says " Failed to open /system/build.prop !
using default no name.
E:Can't mount backup path.
press any key to continue. "
and when try for example " choose file from /sdcard " it says "E:Can't mount /sdcard "
and thanks for your reply
and again my phone type is hl3gds that is SM-N7502
---------- Post added at 01:36 PM ---------- Previous post was at 12:45 PM ----------
aaboism said:
Thanks again for reply
my phone is SM-N7502 .. and i followed the procedure exactly as u said ..
But when i tried for example " backup to /sdcard " it says " Failed to open /system/build.prop !
using default no name.
E:Can't mount backup path.
press any key to continue. "
and when try for example " choose file from /sdcard " it says "E:Can't mount /sdcard "
and thanks for your reply
and again my phone type is hl3gds that is SM-N7502
Click to expand...
Click to collapse
i used what u made for " Mersad_Maral" from this link : in post #103
that is for SM-N7502 ... this what i am talking about
thanks for your reply .... i hope u help in this

Stable Recovery
Hi RVR
First of all I should have reply my heartfull Appreciatations for your efforts to make
A custom recovery for our forsaken glorious cell!
On the other hand I wanted to ask for more support for our phones, if it's possible for u
And it would be very kind of you!
To make a full-fledged recovery thats completely satble!
The freaking hell sized BEST REGARDS!!
Sent ftom Sm-N7502

Back to stock?

I did the whole changing to a developers thing. Right now I am on:
CyanogenMod 13.0-20160426
Baseband Version:
N910VVRU2BPA1
Kernel Version:
3.10.40-gbf62456f
[email protected] #1
Tue Apr 26 15:48:30 GMT 2016
Build Number:
Android 6.0.1 MOB30D N910VVRU2BPA1
Because of camera issue on this ROM, I would like to just unroot and get back to stock so I can just do OTA updates and not have to worry about rooting/unrooting anymore.
Can someone please tell me the easiest way to get this accomplished, or if there is a fix for the Camera issue. I have spent quite a bit of time researching both of my questions, but couldn't find a resolution. Any help would be greatly appreciated. Thanks in advance.

inassah said:
I did the whole changing to a developers thing. Right now I am on:
CyanogenMod 13.0-20160426
Baseband Version:
N910VVRU2BPA1
Kernel Version:
3.10.40-gbf62456f
[email protected] #1
Tue Apr 26 15:48:30 GMT 2016
Build Number:
Android 6.0.1 MOB30D N910VVRU2BPA1
Because of camera issue on this ROM, I would like to just unroot and get back to stock so I can just do OTA updates and not have to worry about rooting/unrooting anymore.
Can someone please tell me the easiest way to get this accomplished, or if there is a fix for the Camera issue. I have spent quite a bit of time researching both of my questions, but couldn't find a resolution. Any help would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
Easiest way would be to find your stock ROM on Sam moble and flash it through Odin. There are numerous threads on XDA I would suggest reading a few so you have a clear understanding of the process. It can better explain it then I could. It's pretty simple though. Good luck!
Sent from my SM-N910P using Tapatalk

Modtronix said:
Easiest way would be to find your stock ROM on Sam moble and flash it through Odin. There are numerous threads on XDA I would suggest reading a few so you have a clear understanding of the process. It can better explain it then I could. It's pretty simple though. Good luck!
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Hi,
Thank you for your response. That is exactly what i thought i had to do. I could not find the appropriate stock firmware apparently. I tried one a few weeks ago, but it kept failing in ODIN. If someone could point me towards the appropriate stock firmware link, that would be awesome. Thanks again.

inassah said:
Hi,
Thank you for your response. That is exactly what i thought i had to do. I could not find the appropriate stock firmware apparently. I tried one a few weeks ago, but it kept failing in ODIN. If someone could point me towards the appropriate stock firmware link, that would be awesome. Thanks again.
Click to expand...
Click to collapse
N910VVRU2BPA1
This possibly if it copied properly all did though was look in XDA so its available. Again, good luck!
Sent from my SM-N910P using Tapatalk
---------- Post added at 02:25 PM ---------- Previous post was at 02:20 PM ----------
Modtronix said:
N910VVRU2BPA1
This possibly if it copied properly all did though was look in XDA so its available. Again, good luck!
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
In XDA general Verizon search for @hsbadr his work so he gets the credit. Hope it helps.
Sent from my SM-N910P using Tapatalk

Question
Modtronix said:
N910VVRU2BPA1
This possibly if it copied properly all did though was look in XDA so its available. Again, good luck!
Sent from my SM-N910P using Tapatalk
---------- Post added at 02:25 PM ---------- Previous post was at 02:20 PM ----------
In XDA general Verizon search for @hsbadr his work so he gets the credit. Hope it helps.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
What other ROM can I flash from what I have now, without having to unlock and relock, or any of that. I just want to download a zip and flash from recovery.
CyanogenMod 13.0-20160426
Baseband Version:
N910VVRU2BPA1
Kernel Version:
3.10.40-gbf62456f
[email protected] #1
Tue Apr 26 15:48:30 GMT 2016
Build Number:
Android 6.0.1 MOB30D N910VVRU2BPA1
On a side note, this may help those who are on CM13 and having video record problems. The Reason I want to flash a different ROM is because my status bar doesn't work, and I could not record video with the camera. I was able to resolve the camera issue by going in the camera settings, and choosing 1080p as the resolution, as apposed to the 4K default. Video works right away after doing that. The status bar is still broke, and I actually did a clean install twice but still couldn't get it to work.

inassah said:
What other ROM can I flash from what I have now, without having to unlock and relock, or any of that. I just want to download a zip and flash from recovery.
CyanogenMod 13.0-20160426
Baseband Version:
N910VVRU2BPA1
Kernel Version:
3.10.40-gbf62456f
[email protected] #1
Tue Apr 26 15:48:30 GMT 2016
Build Number:
Android 6.0.1 MOB30D N910VVRU2BPA1
On a side note, this may help those who are on CM13 and having video record problems. The Reason I want to flash a different ROM is because my status bar doesn't work, and I could not record video with the camera. I was able to resolve the camera issue by going in the camera settings, and choosing 1080p as the resolution, as apposed to the 4K default. Video works right away after doing that. The status bar is still broke, and I actually did a clean install twice but still couldn't get it to work.
Click to expand...
Click to collapse
your on the wrong bootloader for cm13 (marshmallow). you still have lolipop bootloader (bpa1) you need cqa1 for 6.0.1 up to 7.1.1