Hi guys idk if this is common thing(issue) but everytime i connect my HOX to my computer mounts 2 units. 1 as MTP device(25.2 GB) and 1 as Mass Storage(16 MB) and everytime it asks if i want to format the Mass storage drive. Anyone with a hint what it is wrong with my device? I'm on ARHD 19.2 nad Kozmik 008 if that matters. Thanks in advance.
Have you had this issue with other ROMs?
Try to enable/disable debugging
Delete any drivers that's related to your device and install them again.
Sent from my HTC One X
If I disable usb debugging the pc shows the mtp device only.
luis4ever said:
If I disable usb debugging the pc shows the mtp device only.
Click to expand...
Click to collapse
It's down to 2 possibilities now, it's either you PC fault, or the ROM's
to make sure, you need to get access to another PC , enable usb debugging back and connect your device to the other PC and see what happens
depending on the result , we'll work from there
and i'll need some more info about your PC (Windows/Linux?) and what edition
Related
I've successfully installed the Open Desire rom on my HTC Desire, but if I try to plug in my phone to my PC I get a windows noise (asif a USB device is connected), but no access to the actual device (e.g. the drive doesnt appear in my computer).
Any ideas on what to do? It was working fine on the same PC before installing a new rom...
Thanks.
Vistrix said:
I've successfully installed the Open Desire rom on my HTC Desire, but if I try to plug in my phone to my PC I get a windows noise (asif a USB device is connected), but no access to the actual device (e.g. the drive doesnt appear in my computer).
Any ideas on what to do? It was working fine on the same PC before installing a new rom...
Thanks.
Click to expand...
Click to collapse
enable usb debugging...
cyron_at said:
enable usb debugging...
Click to expand...
Click to collapse
Its enabled like before... my phone says its in usb debugging mode when I plug it in but theres no device available to select from my computer...
USB brick?
Sent from my Evil Lair using Doomsday Device
Ok I tried plugging into a different PC (which it hasnt been connected to yet), it goes to install the phone USB drivers and then it comes up with "USB Device not Recognised" in windows XP...
Vistrix said:
Ok I tried plugging into a different PC (which it hasnt been connected to yet), it goes to install the phone USB drivers and then it comes up with "USB Device not Recognised" in windows XP...
Click to expand...
Click to collapse
Sounds like the usb brick as mentioned above.
What recovery method did you use? Is your phone seeing the sd card?
I had the same problem, can you install from Market? I fixed the problem by changing the default install location for the apps.
http://forum.xda-developers.com/showthread.php?t=742379
Now I can connect both discdrive mode and htc sync. Latest OTA did this for me.
hi, need help here, i just bought new phone galaxy w, my problem is, i cannot connect my phone to the pc, all it shows only the MTP connected,
how can fix to ensure i can use the usb mass storage device
Go to settings>wireless and network>usb utilities..tap on "connect storage to PC" and plug your usb cable..
Sent from another space
jidee1705 said:
hi, need help here, i just bought new phone galaxy w, my problem is, i cannot connect my phone to the pc, all it shows only the MTP connected,
how can fix to ensure i can use the usb mass storage device
Click to expand...
Click to collapse
If you have the adb stuff driver running then you cant connect in data transfer mode usb.
Or
you need to uncheck the USB debugging mode before connect the usb cable
if you have a wifi router you might like the "airdroid" App... i use it a lot ckeck it out
jidee1705 said:
hi, need help here, i just bought new phone galaxy w, my problem is, i cannot connect my phone to the pc, all it shows only the MTP connected,
how can fix to ensure i can use the usb mass storage device
Click to expand...
Click to collapse
try check "Debug USB"
Config >> Applications >> Development >> "Debug USB" (i dont know correct name because use portuguese version)
Hi I recently made the plunge and installed an ICS build via CWM. Now I need to know how to do some very basic thing that I used to be able to do on gingerbread.
Before I simply turned on USB debugging mode via applications USB mode and then when I plugged my phone to my computer I would see it as a USB key(well 2 keys 1 for internal and 1 for External card) Now I can no longer get that mode. Debugger mode or not I always see a phone in Windows 7 and there I see the 2 drives.
PS: reason I liked this mode is my preview would work on Windows 7 to see all my pictures. This mode on ICS I need to double click to load a picture as the thumbnails do not work.
Please help, what am I doing wrong.
dudejb said:
Hi I recently made the plunge and installed an ICS build via CWM. Now I need to know how to do some very basic thing that I used to be able to do on gingerbread.
Before I simply turned on USB debugging mode via applications USB mode and then when I plugged my phone to my computer I would see it as a USB key(well 2 keys 1 for internal and 1 for External card) Now I can no longer get that mode. Debugger mode or not I always see a phone in Windows 7 and there I see the 2 drives.
PS: reason I liked this mode is my preview would work on Windows 7 to see all my pictures. This mode on ICS I need to double click to load a picture as the thumbnails do not work.
Please help, what am I doing wrong.
Click to expand...
Click to collapse
Go to Settings - More - USB utilities - Connect storage to PC - {connect the phone to the computer} - Turn on USB storage - OK
Viktor0610 said:
Go to Settings - More - USB utilities - Connect storage to PC - {connect the phone to the computer} - Turn on USB storage - OK
Click to expand...
Click to collapse
Thank you works great!
Tonight I go to bed less stupid!
i have rooted wildfire s (marvel).from somedays i have mass storage problem in my device.like when i connected to my laptop its not detected my sdcard.and also it didnt detect htc sync.if i on usb debugging then my device ll show mass storage.and i have stock rom 2.3.5
so please help me to solve problem.i did all things like reseting phone,format sdcard and all things.i have many other phones but only this android couldnt detected please help
crossfire77 said:
i have rooted wildfire s (marvel).from somedays i have mass storage problem in my device.like when i connected to my laptop its not detected my sdcard.and also it didnt detect htc sync.if i on usb debugging then my device ll show mass storage.and i have stock rom 2.3.5
so please help me to solve problem.i did all things like reseting phone,format sdcard and all things.i have many other phones but only this android couldnt detected please help
Click to expand...
Click to collapse
Go To Settings>Connect To PC> Default Action>Set It to Mass Storage>Untick Ask Me Option
Press Thanx If I Helped
fireworker said:
Go To Settings>Connect To PC> Default Action>Set It to Mass Storage>Untick Ask Me Option
Press Thanx If I Helped
Click to expand...
Click to collapse
not working
First of all check the wire and port. Maybe something is loose?
Second: Go to device manager, does it find the phone there? If it does, right click on it and select uninstall. Then disconnect the device and reboot. When it's rebooted attach the device again.
sukhjit321 said:
First of all check the wire and port. Maybe something is loose?
Second: Go to device manager, does it find the phone there? If it does, right click on it and select uninstall. Then disconnect the device and reboot. When it's rebooted attach the device again.
Click to expand...
Click to collapse
not working
crossfire77 said:
not working
Click to expand...
Click to collapse
Does it show in device manager?
sukhjit321 said:
Does it show in device manager?
Click to expand...
Click to collapse
yeah it shows in device manager as "usb mass storage" but its not shows me my memory card in computer.when i on usb debugging then it ll mount sd card.and if i choose htc sync there comes a error.
fail to mount/unmount device storage card(1020).
in all cases i have to on usb debugging then it ll show me my device.
.
Plz Help
I Just Got An Optimus Lte Lu6200
it was having problem that it was not Showing USB Storage When I Connect and Chose "USB Storage"
Also USB Debugging not working,Although I Enable it and connected it via LG Software
Now I Flashed ICS Engineer Mode using Download Mode,Still No Mass Storage Working ,Debugging Shows Enabled but Not Actually
I Tried
Uninstalling and Reinstalling Drivers
Checked on another Computer
No USE
Plz help Me...Appreciated
Maybe It's your phone.
yawxir said:
Plz Help
I Just Got An Optimus Lte Lu6200
it was having problem that it was not Showing USB Storage When I Connect and Chose "USB Storage"
Also USB Debugging not working,Although I Enable it and connected it via LG Software
Now I Flashed ICS Engineer Mode using Download Mode,Still No Mass Storage Working ,Debugging Shows Enabled but Not Actually
I Tried
Uninstalling and Reinstalling Drivers
Checked on another Computer
No USE
Plz help Me...Appreciated
Click to expand...
Click to collapse
Maybe your phone was damage. Did you recently bought that phone? If yes, then the concern maybe is the device itself.
But try install the latest driver for LU6200 [Make sure to download it in LG Mobile Korea] and maybe it would help. Make sure the computer is detecting your phone as you connect it.
Hope this will help you.
mac20dnangel said:
Maybe your phone was damage. Did you recently bought that phone? If yes, then the concern maybe is the device itself.
But try install the latest driver for LU6200 [Make sure to download it in LG Mobile Korea] and maybe it would help. Make sure the computer is detecting your phone as you connect it.
Hope this will help you.
Click to expand...
Click to collapse
Yes Its Not Only Detecting but i Also Put my Phone On Download Mode (Pressing Power+Vol Down) and Flashed Successfully Engineer ICS KDZ File ,The Whole Process Was Done with No Error
But Still Same Mass Storage Problem.........
mass storage is disabled in ics engineer version.
you can try to enable it with adb: "adb shell /system/bin/sdutil ums enable"
or if it doesnt work, use an android software manager like mobilego to access your mass storage.
Thnksss But.....
devcon69 said:
mass storage is disabled in ics engineer version.
you can try to enable it with adb: "adb shell /system/bin/sdutil ums enable"
or if it doesnt work, use an android software manager like mobilego to access your mass storage.
Click to expand...
Click to collapse
Really Thankful to you for reply
But Whats About Debugging Not Working?
Also Its your Suggestion Possible Without Root?As USB Debugging is not working and im unable to Root