I recently root my Galaxy Grand (thanks to chotu222) and flashed it with k2wl's ROM and are working great.
However, I want to know how can I revert this to its original recovery and ROM that is same as brand new. Just in case for warranty purposes.
I hope someone can help me and guide me.
Thanks!
jadjad said:
I recently root my Galaxy Grand (thanks to chotu222) and flashed it with k2wl's ROM and are working great.
However, I want to know how can I revert this to its original recovery and ROM that is same as brand new. Just in case for warranty purposes.
I hope someone can help me and guide me.
Thanks!
Click to expand...
Click to collapse
just download the firmware from sammobile.com/firmware
flash through odin3 3.04
u get ur stock rom and recovery.
k2wl said:
just download the firmware from sammobile.com/firmware
flash through odin3 3.04
u get ur stock rom and recovery.
Click to expand...
Click to collapse
I have rooted the phone with CWM.
Tried to revert back to stock ROM.
But I am stuck at setup connection in Odin.
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
After this it fails.
Do you have any solution for this.
Does this mean the firmware is locked?
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
Do you have any solution for this
mr_coimbatore said:
I have rooted the phone with CWM.
Tried to revert back to stock ROM.
But I am stuck at setup connection in Odin.
Odin v.3 engine (ID:6)..
File analysis..
SetupConnection..
After this it fails.
Do you have any solution for this.
Does this mean the firmware is locked?
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
Do you have any solution for this
Click to expand...
Click to collapse
Before flashing u have to factory reset the phone..
wipe cache and dalvic cache then try again...
Sent from Gt-I9082
rejocie001 said:
Before flashing u have to factory reset the phone..
wipe cache and dalvic cache then try again...
Sent from Gt-I9082
Click to expand...
Click to collapse
Thanks Rejocie.
I did wipe cache, factory reset and dalvic cache.
Result is same.
Still could not flash anything with Odin.
mr_coimbatore said:
Thanks Rejocie.
I did wipe cache, factory reset and dalvic cache.
Result is same.
Still could not flash anything with Odin.
Click to expand...
Click to collapse
Check kies software is running background... If yes,, disable it first.. And also check all the drivers are properly installed.
Sent from Gt-I9082
rejocie001 said:
Check kies software is running background... If yes,, disable it first.. And also check all the drivers are properly installed.
Sent from Gt-I9082
Click to expand...
Click to collapse
I did uninstall Kies and tried (with installing drivers again). But negative result
mr_coimbatore said:
I did uninstall Kies and tried (with installing drivers again). But negative result
Click to expand...
Click to collapse
This one happens to me also at that the data is corrupted... Re download data again and check any issues with usb cable...
Sent from Gt-I9082
rejocie001 said:
This one happens to me also at that the data is corrupted... Re download data again and check any issues with usb cable...
Sent from Gt-I9082
Click to expand...
Click to collapse
I downloaded 3 versions of firmware (India, China and Turkey). But all there failed through Odin. Changed 3 different cable not result.
Also tried to push the modem file through Odin, which also fails.
mr_coimbatore said:
I downloaded 3 versions of firmware (India, China and Turkey). But all there failed through Odin. Changed 3 different cable not result.
Also tried to push the modem file through Odin, which also fails.
Click to expand...
Click to collapse
Please tell me the procedure for installing the rom. Something somewhere is wrong.
Sent from Gt-I9082
---------- Post added at 05:26 PM ---------- Previous post was at 05:22 PM ----------
mr_coimbatore said:
I downloaded 3 versions of firmware (India, China and Turkey). But all there failed through Odin. Changed 3 different cable not result.
Also tried to push the modem file through Odin, which also fails.
Click to expand...
Click to collapse
I think phone boot loader is locked or what. Don't download China firmware. It's totally different all other firmwares.
Sent from Gt-I9082
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
You have to ask experts for this solution....
Sent from Gt-I9082
k2wl said:
just download the firmware from sammobile.com/firmware
flash through odin3 3.04
u get ur stock rom and recovery.
Click to expand...
Click to collapse
Hi, can you please elaborate on this?. In ODIN do I point to the firmware file directly under the PDA section and flash?. Or do I need to extract the firmware file and point to PDA, Bootloader, CSC etc separately to the extracted files?. Please help and explain your suggestion in some more detail. I have rooted and installed CWM. I wish to go back to the stock Android Recovery. I already know the process to UNROOT. Thanks in advance for your help.
Extract the single tar.md5 file and flash thru ODIN
Sent from my GT-N7000 using xda app-developers app
help needed
Me also face the same problem
while flashing through odin the message show that like below
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Kindly help
bongski55 said:
Extract the single tar.md5 file and flash thru ODIN
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
thanks
Finally i got pass and succeed to install stock rom.. after restart the system and reinstall the kies
Thanks
ebemrlonely said:
Me also face the same problem
while flashing through odin the message show that like below
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Kindly help
Click to expand...
Click to collapse
if still have any issues then :
1. Make sure you should >50% battery
2. Please have enabled USB debugging (All apps > Settings > Manage Applications > Development > USB Debugging – check box)
3. Ensure you have backed up your important data.
4. Install USB drivers on your PC from here.
!!! Press THANKS If Helped !!!
flight mode is on
After installing custom rom Samsung Galaxy Grand Duos i9082 , it is saying flight mode is on. yurn off flight mode to make call.please help ..
i tried with differenr ROMs still same issue.
move your question to new thread brother
asitpanda said:
After installing custom rom Samsung Galaxy Grand Duos i9082 , it is saying flight mode is on. yurn off flight mode to make call.please help ..
i tried with differenr ROMs still same issue.
Click to expand...
Click to collapse
you are in middle of others question, you should move your question to new thread i hope so!!!!
Related
Hi all , today I've flash the stock rom for my Note 2 , but after that , my Note 2 cannot registered on the network and the IMEI was change to 0049xxx...
Then I've flash the new Modem here as this guy told http://forum.xda-developers.com/showpost.php?p=43037352&postcount=134.
But in Odin , I choose the file in PDA tab instead of Phone Tab and the modem can still flash ok. After that ,when reboot my phone , it cannot turn off every time the screen is off. And I can't make my phone become normal , i've reflash the stock rom many times , but that didn't help.
Someone please help me?
And I cannot connect to KIES anymore ...
heorung said:
And I cannot connect to KIES anymore ...
Click to expand...
Click to collapse
hey. try flashing the rom again using odin and set it as PDA..
after that, lei it boot.. if you still not getting any signal, or lost ypur imei, flash the modem and set it as PHONE
Hope it works
among4239bulan said:
hey. try flashing the rom again using odin and set it as PDA..
after that, lei it boot.. if you still not getting any signal, or lost ypur imei, flash the modem and set it as PHONE
Hope it works
Click to expand...
Click to collapse
Hi , thanks for the reply , did you mean flash the firmware file with the PHONE option tick?
heorung said:
Hi , thanks for the reply , but how to set pda or phone?
Click to expand...
Click to collapse
see image below..
the red circle is PDA, insert your ROM file here.
the pink circle is PHONE, insert your MODEM file here.
also wipe cache, data and dalvik cache in cwm.
among4239bulan said:
see image below..
the red circle is PDA, insert your ROM file here.
the pink circle is PHONE, insert your MODEM file here.
also wipe cache, data and dalvik cache in cwm.
Click to expand...
Click to collapse
Hi among4239bulan , i already tried that but the phone still mess up , i've tried to flash the newwest stock rom and the network has return back to normal , but the phone cannot turn on whenever the screen is off
Don't know if put the modem.tar.md5 in the "PDA" slot is destroyed anything ?
I download the rescue firmware but Odin cannot flash it , it's always stuck at
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
heorung said:
Hi among4239bulan , i already tried that but the phone still mess up , i've tried to flash the newwest stock rom and the network has return back to normal , but the phone cannot turn on whenever the screen is off
Don't know if put the modem.tar.md5 in the "PDA" slot is destroyed anything ?
I download the rescue firmware but Odin cannot flash it , it's always stuck at
Click to expand...
Click to collapse
it may be related to the wrongly placed modem.tar earlier.. just try flashing another rom,custom one just to see whether the problem still persist.. or have you tried the pre-rooted stock rom that dr.ketan had provided?
Hi among4239bulan , i used the Mobile Odin to flash the rescue firmware , and seems that the problem was gone. Thanks for your help , I really appreciate that ^^
heorung said:
Hi among4239bulan , i used the Mobile Odin to flash the rescue firmware , and seems that the problem was gone. Thanks for your help , I really appreciate that ^^
Click to expand...
Click to collapse
no problem, glad that the problem is solved.
Hey there,
I know some people have been requesting this for quite some time! This couldn't have been possible without @techguy1214 so a huge thanks goes out to him!
This is the absolute STOCK M919N Firmware. (THIS IS NOT ROOTED!)
EXPERIMENTAL: This is UNTESTED by me, I compiled this ODIN tar file using the same structure the T-Mobile ODIN File has. I do not have the MetroPCS version of this phone, I have the T-Mobile version. But I figured enough people wanted it so I would try to make it happen.
CONFIRMED WORKING!
I will not be help responsible if you brick your device or flash this incorrectly and your phone ends up blowing up. You have been warned.
Click to expand...
Click to collapse
NOTE: Because this is not officially signed by Samsung, I believe your flash counter will go up, use Triangle Away to reset your counter!
Huge thanks goes out to @danyvw for picking up my slack, new instructions posted.
Link: https://docs.google.com/file/d/0BxJFwkvU-C2McW5zU0RWQ01hM2s/edit?usp=sharing
1. Download the above .zip file and extract the .tar file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1 and select it
5. DO NOT PUT .PIT FILE AND DO NOT TICK REPARTITION
6. Connect the USB cable and wait for the ID:COM section to turn blue
7. Click start to flash
8. Do not disconnect the cable or turn off the device once the flash has started, it’s going to take some time to flash, when finish exit Odin and disconnect USB.
9. Let the phone start and Voila!!!!!!
theexel said:
Hey there,
I know some people have been requesting this for quite some time! This couldn't have been possible without @techguy1214 so a huge thanks goes out to him!
This is the absolute STOCK M919N Firmware. (THIS IS NOT ROOTED!)
EXPERIMENTAL: This is UNTESTED by me, I compiled this ODIN tar file using the same structure the T-Mobile ODIN File has. I do not have the MetroPCS version of this phone, I have the T-Mobile version. But I figured enough people wanted it so I would try to make it happen.
AGAIN.. THIS MAY NOT WORK.
If it doesn't use the T-Mobile ODIN, it will work, but of course, you will have the T-Mobile Baseband and whatnot, but if it does not work, I will try to work on it again soon!
NOTE: Because this is not officially signed by Samsung, I believe your flash counter will go up, use Triangle Away to reset your counter!
Download the TAR file: https://copy.com/lyMNNbzjaNYm
Click to expand...
Click to collapse
i tired it it worked 100% thanks
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
No, thank you @techguy1214.
Without you, we wouldn't have these files! :highfive:
What is STOCK M919N ?
Can you elaborate more about the different between this M919N & M919V (as an example):
Can we flash without root ?
Compatibility with what ROM or firmware ?
Report log or advantages...etc.?
Anything more...?
itzik_man said:
Can you elaborate more about the different between this M919N & M919V (as an example):
Can we flash without root ?
Compatibility with what ROM or firmware ?
Report log or advantages...etc.?
Anything more...?
Click to expand...
Click to collapse
M919N is the MetroPCS variant of the Galaxy S4.
M919V is the Wind / Mobilicity / Videotron variant of the Galaxy S4, I believe.
This is for people that maybe messed up flashing a ROM or simply want to go back to barebone OFFICIAL MetroPCS stock firmware due to any reason. (Most likely they broke something and want to send it to warranty, lol.)
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
any 1 else confirm this....??
djlucklu said:
any 1 else confirm this....??
Click to expand...
Click to collapse
Seems not...
arocker said:
Seems not...
Click to expand...
Click to collapse
Did not work for me. I jumped the gun and flashed a tmo stock rom to see if I could unlock my phone for free. I am unable to flash back to this rom now and can't unlock using a tmo rom.
Can anyone confirm that the pit files are different between the M919 and M919N? I tried a lot of different things last night and I think I flashed the M919 pit file as well as the rom, which is most likely my problem. Odin fails as soon as it tries to write.
Doesn't work
I tried to flash many times with different downloads and always get the same flash error:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NON-HLOS.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I get the exact same error.
downloading now ill let you know
fatalfury said:
downloading now ill let you know
Click to expand...
Click to collapse
Any update fatalfury?
people with errors making sure kies is not open right ? also try the USB port on back of computer and test again
krazierokz said:
people with errors making sure kies is not open right ? also try the USB port on back of computer and test again
Click to expand...
Click to collapse
Is not with Kies, its with Odin. Kies does not have firmware support for the SGH-M91N.
Understood just stating that Odin and kies open together conflicts and Odin won't run right that's all I'm saying
sent from my t mobile S4
Fixing Issues an PLEAS!!!
zbennett15 said:
I get the exact same error.
Click to expand...
Click to collapse
For this you are going to need mobile Odin To Flash an you will need to flash twice after you flash it the first time!:laugh::fingers-crossed:
techguy1214 said:
For this you are going to need mobile Odin To Flash an you will need to flash twice after you flash it the first time!:laugh::fingers-crossed:
Click to expand...
Click to collapse
Same error with PC odin, and when trying to open with mobile odin - partition could not be found.
---------- Post added at 07:20 PM ---------- Previous post was at 06:50 PM ----------
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
Hey! how you flashed it? Thanks in advance.
I made some changes to techguy file.Is Working flawlessly with Odin, posted on androidforums:
http://androidforums.com/metropcs-g...t/773372-unofficial-m919nuvuamf2-working.html
danyvw said:
I made some changes to techguy file.Is Working flawlessly with Odin, posted on androidforums:
http://androidforums.com/metropcs-g...t/773372-unofficial-m919nuvuamf2-working.html
Click to expand...
Click to collapse
Updated OP, thank you.
Exel said:
Updated OP, thank you.
Click to expand...
Click to collapse
Thank you! Without your file I wouldn't have done anything. :good:
Hello everyone.
Phone Samsung Galaxy note 2 gt n7105 T mobile UK
So this morning my phone was working fine and while i was playing a game my phone literally just went dead, black screen and then stuck on galaxy note II screen.
So booted into recovery which is Philz touch 4 (had it on there for a few months so cant be more specific)
And i figured i would just do a wipe and reinstall.
But now i cant wipe cache just get error formatting /cache!
So i thought i would try just reinstalling a rom, i was using Jedi x2 rom previously so i went to try installing that, and it started to install then goes blank and reboots back to galaxy note II screen.
rebooted into recovery to check log and i get this.
I : Checking for extendedcommand & OpenRecveryScript..
I ; Skiping execution of extendedcommand. file not found
I : Using /data/media for /sdcard
w : Failed to mount /dev/block/mmcblk0p16 )invalid argument)
I :Skipping execution of OpenRecoveryScript, file not found
E : Cant't open /Cache/recovery/log
E : Cant't open /Cache/recovery/log
E : Cant't open /Cache/recovery/last_lo
E : Cant't open /Cache/recovery/log
So i thought i would just try and install stock rom via odin which failed
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
So now i dont know what to do, is my phone dead?
Please help, i tried to find info on the forums which lead me to try a few of the steps i have tried already and now im really stuck
Was your phone on updated bootloader ?
I notice your phone is N7105 what stock rom did you try to flash ?
Sent from my SGH-T889 using xda app-developers app
Can you attach screenshot with device reboot in download mod?
Sent from my SM-N900 using xda premium
dr.ketan said:
Can you attach screenshot with device reboot in download mod?
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
I have no way of taking a screen shot but ill type what it says there.
ODIN MODE
Product name : GT-N7105
Custom binary download: yes (17 counts)
Current binary: custom
System status : custom
(next 2 lines are in dark grey)
Knox warrenty void: 1
RP SWREV: A2
ciphercodes said:
Was your phone on updated bootloader ?
I notice your phone is N7105 what stock rom did you try to flash ?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Bootloader i think was fairly new, i dont know how often they update them (thats if you mean the philz touch thing?)
As for the rom, i got the lastest from SamMobile but they are classed as EE and not Tmobile ones so its possible thats why i have an issue?
Im a bit of a noob with the way Samsung and roms work. Was no problems with my old HTC.
You will have to download the exact firmware for your device N7105 and flash it using odin.
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
You will have to download the exact firmware for your device N7105 and flash it using odin.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well i thought i already had what i needed, and since then i have tried a couple older versions too.
Unless im not even getting the correct roms/firmware.
I just get
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In odin.
nollington said:
Well i thought i already had what i needed, and since then i have tried a couple older versions too.
Unless im not even getting the correct roms/firmware.
I just get
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In odin.
Click to expand...
Click to collapse
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
You can also try to flash the using ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
ciphercodes said:
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
Try ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
Click to expand...
Click to collapse
I dont know anything about KIES to be honest.
Ill look for a download of an older odin and try that.
As for the Roms on sammobile, i have been using the UK ones but the ones for EE since EE took over t mobile / orange. It seems thay are the only ones available
So i just found this thread on Kies
http://forum.xda-developers.com/showthread.php?t=2261153
Is this what i should try? i dont want to try it without knowing its what i should be doing.
nollington said:
So i just found this thread on Kies
http://forum.xda-developers.com/showthread.php?t=2261153
Is this what i should try? i dont want to try it without knowing its what i should be doing.
Click to expand...
Click to collapse
Yes.
Remember if your phone can go in to download mode then it can still be recovered, just need to find the right firmware.
ciphercodes said:
Yes.
Remember if your phone can go in to download mode then it can still be recovered, just need to find the right firmware.
Click to expand...
Click to collapse
Ok well so far i cant get odin to install anything. I either get an error after NAND as mentioned previously, or it gets stuck on set up connection.
Possibly a ROM/Firmware issue? but i have tried 3 different ones from sammobile all for EE UK as i cant find specific tmobile anymore.
As for what my phone can do at the moment.
It can boot into Philz touch but will reboot if you do anything like format cache/system/factory reset etc.
And can also put it into download mode with menu + volume down + power.
So i guess ill try that KIES thing and then see what happens.
If you have any other advice for me i would appreciate it.
And also thank you for your help so far
nollington said:
Ok well so far i cant get odin to install anything. I either get an error after NAND as mentioned previously, or it gets stuck on set up connection.
Possibly a ROM/Firmware issue? but i have tried 3 different ones from sammobile all for EE UK as i cant find specific tmobile anymore.
As for what my phone can do at the moment.
It can boot into Philz touch but will reboot if you do anything like format cache/system/factory reset etc.
And can also put it into download mode with menu + volume down + power.
So i guess ill try that KIES thing and then see what happens.
If you have any other advice for me i would appreciate it.
And also thank you for your help so far
Click to expand...
Click to collapse
Since you were using Philz recovery did you take a full back up ? If yes, can you try to restore it ?
If Philz is not responding as it should then try flashing Philz via ODIN.
ciphercodes said:
Since you were using Philz recovery did you take a full back up ? If yes, can you try to restore it ?
If Philz is not responding as it should then try flashing Philz via ODIN.
Click to expand...
Click to collapse
I had made a back up previously (a few months ago) and tried to install that via philz but it wouldnt even read the file.
Also tried to reflash philz via odin and it fails.
And currenctly im having issues with KIES finding my device. It just doesnt seem to want to connect to it.
So i also just saw this while trying to get a backup to work.
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p13
Error formatting /system!
Im guessing something is pretty corrupt since i cant format cache or system
nollington said:
I had made a back up previously (a few months ago) and tried to install that via philz but it wouldnt even read the file.
Also tried to reflash philz via odin and it fails.
And currenctly im having issues with KIES finding my device. It just doesnt seem to want to connect to it.
Click to expand...
Click to collapse
ok if your trying to install via the KIES software you need to be i download mode not recovery . once your in recovery mode should start seeing your device and start installing drivers or drivers might already be installed and it will ask you for device model number and serial number and will download the current OS and install . i had the same issue as you did and recover my phone via KIES hope this helps
MERK77 said:
ok if your trying to install via the KIES software you need to be i download mode not recovery . once your in recovery mode should start seeing your device and start installing drivers or drivers might already be installed and it will ask you for device model number and serial number and will download the current OS and install . i had the same issue as you did and recover my phone via KIES hope this helps
Click to expand...
Click to collapse
I have been in download mode but KIES wont connect to my phone it just sits on connecting to device for about 10 mins and then says to reboot the device. And then does the same again.
Even tried a different cable and that didnt make any difference.
ciphercodes said:
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
You can also try to flash the using ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
Click to expand...
Click to collapse
I flashed an EE firmware 4.3 over H3G 4.1.2 using old Odin. Works fine but you lose all internal data
Sent from my GT-I9100 using XDA Premium HD app
Im thinking it is a storage problem.
Since im having issues with cache,storage,data formatting.
I read on a thread somewhere i could have to install some .PIT?
Is there anyway to do a kind of full wipe with odin or anything? and then be able to reinstall everything such as partitions?
Those could be really noob things to ask, but im not really much of a "pro" with the phone side of things, just thinking along the lines of regular storage systems being corrupt.
nollington said:
Im thinking it is a storage problem.
Since im having issues with cache,storage,data formatting.
I read on a thread somewhere i could have to install some .PIT?
Is there anyway to do a kind of full wipe with odin or anything? and then be able to reinstall everything such as partitions?
Those could be really noob things to ask, but im not really much of a "pro" with the phone side of things, just thinking along the lines of regular storage systems being corrupt.
Click to expand...
Click to collapse
The last ODIN log you posted shows that it failed while flashing sboot.bin which is the bootloader. I think that was when you tried to flash the older firmwares.
Here is the PIT file for N7105 but I cannot assure if it work or not as I have a different phone SGH-T889.
http://forum.xda-developers.com/showthread.php?t=2137008
I do not think the partition table is messed. I still think flashing the correct firmware via ODIN should get this fixed.
Few other things to try:
You can also flash CF-Autoroot for N7105, it comes with stock recovery and then you can wipe data and perform a factory reset from there.
http://download.chainfire.eu/255/CF-Root/CF-Auto-Root/CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip
You can try flashing TWRP or CWM via ODIN and use then wipe the cache.
Hello!
First, I apologize for not knowing english, I'm Brazilian.
and also because I do not know if here is the right place to post.
I have a problem, need help very much!
I'll try to explain perfectly.
I had installed TWRP;
and the rom SlimWiz SL1.
I thought about changing rom, then
I was trying to install DN3_v5.5.
I selected the TWRP, I selected to wipe cache, dalvik cache, system and data,
tried installing DN3, but do not know for what reason, did not install the file,
said that there were installers but not charged anything on the phone,
I could not add another rom to install, then hung up.
Now I can not install anything because I have no access recover, TWRP
I can only access the download mode.
When I try to install the odin the following error appears:
<ID: 0/003> Added !!
<ID: 0/003> Odin v.3 engine (ID: 3) ..
<ID: 0/003> File analysis ..
<ID: 0/003> SetupConnection ..
<ID: 0/003> Initialzation ..
<ID: 0/003> Set PIT file ..
<ID: 0/003> DO NOT TURN OFF TARGET !!
<ID: 0/003> FAIL!
<ID: 0/003>
<ID: 0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
or the following message appears when I will try to install a rom: "There is no PIT partition"
I try to use everything in ODIN.
download mode looks like this:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 0
Does anyone know how I can revive my phone? :crying:
maskara said:
Hello!
First, I apologize for not knowing english, I'm Brazilian.
and also because I do not know if here is the right place to post.
I have a problem, need help very much!
I'll try to explain perfectly.
I had installed TWRP;
and the rom SlimWiz SL1.
I thought about changing rom, then
I was trying to install DN3_v5.5.
I selected the TWRP, I selected to wipe cache, dalvik cache, system and data,
tried installing DN3, but do not know for what reason, did not install the file,
said that there were installers but not charged anything on the phone,
I could not add another rom to install, then hung up.
Now I can not install anything because I have no access recover, TWRP
I can only access the download mode.
When I try to install the odin the following error appears:
<ID: 0/003> Added !!
<ID: 0/003> Odin v.3 engine (ID: 3) ..
<ID: 0/003> File analysis ..
<ID: 0/003> SetupConnection ..
<ID: 0/003> Initialzation ..
<ID: 0/003> Set PIT file ..
<ID: 0/003> DO NOT TURN OFF TARGET !!
<ID: 0/003> FAIL!
<ID: 0/003>
<ID: 0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
or the following message appears when I will try to install a rom: "There is no PIT partition"
I try to use everything in ODIN.
download mode looks like this:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 0
Does anyone know how I can revive my phone? :crying:
Click to expand...
Click to collapse
This does not happen unless you are careless with the given processes. I have flashed custom ROM for over 30 times and have never faced a problem.
Anyway, flash pit file for your device via ODIN.
Then install stock ROM via ODIN.
If pit file flashing fails, report back with error.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
This does not happen unless you are careless with the given processes. I have flashed custom ROM for over 30 times and have never faced a problem.
Anyway, flash pit file for your device via ODIN.
Then install stock ROM via ODIN.
If pit file flashing fails, report back with error.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
using the pit file I got the following error:
<ID: 0/005> Added !!
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Set PIT file ..
<ID: 0/005> DO NOT TURN OFF TARGET !!
<ID: 0/005> Get PIT for mapping ..
it stops running at this time
maskara said:
using the pit file I got the following error:
Added !!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Set PIT file ..
DO NOT TURN OFF TARGET !!
Get PIT for mapping ..
it stops running at this time
Click to expand...
Click to collapse
If you can go to download mode at all, means your phone is soft bricked. Pit file should always work...no reason not to.
I guess you have a broken cable that is causing problems.
Does your phone charge when its off...showing green battery logo?
Also, which ODIN version you are using?
Also, tell me which firmware you are using to flash via ODIN?
Also, before brick was your phone running 4.1.2 or 4.3 or 4.4.2?
Post back.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
If you can go to download mode at all, means your phone is soft bricked. Pit file should always work...no reason not to.
I guess you have a broken cable that is causing problems.
Does your phone charge when its off...showing green battery logo?
Also, which ODIN version you are using?
Also, tell me which firmware you are using to flash via ODIN?
Also, before brick was your phone running 4.1.2 or 4.3 or 4.4.2?
Post back.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
My Phone is soft bricked too... i need .pit file can you link it?
Shady95 said:
My Phone is soft bricked too... i need .pit file can you link it?
Click to expand...
Click to collapse
8gb?
16gb?
32gb ?
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
8gb?
16gb?
32gb ?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
16gb
Shady95 said:
16gb
Click to expand...
Click to collapse
Link:
http://forum.xda-developers.com/showthread.php?t=1927983
If this does not work. Try to flash 4.4.2 Stock ROM. Of that too fails, you have to get it repaired.
Sent from my GT-N7100 using Tapatalk
Hi I know how irritating soft brick is, I have done it twice and both times I got my phone back using KIES by Samsung.
You can do initialization of the Firmware using an option under tools in KIES, it will ask for ur model number and Serial number. It will install Stock ROM back on your phone with Stock Recovery, just follow the on screen instructions!!
I have done it twice and I think it should work for you too!!.
Let us know if you find another solution!!
ceomaverick said:
Link:
http://forum.xda-developers.com/showthread.php?t=1927983
If this does not work. Try to flash 4.4.2 Stock ROM. Of that too fails, you have to get it repaired.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
i have to use .pit file alone or with PDA?
---------- Post added at 08:32 PM ---------- Previous post was at 08:14 PM ----------
arbaheti said:
Hi I know how irritating soft brick is, I have done it twice and both times I got my phone back using KIES by Samsung.
You can do initialization of the Firmware using an option under tools in KIES, it will ask for ur model number and Serial number. It will install Stock ROM back on your phone with Stock Recovery, just follow the on screen instructions!!
I have done it twice and I think it should work for you too!!.
Let us know if you find another solution!!
Click to expand...
Click to collapse
Kies said that is impossible upgrade this device
Shady95 said:
i have to use .pit file alone or with PDA?
---------- Post added at 08:32 PM ---------- Previous post was at 08:14 PM ----------
Kies said that is impossible upgrade this device
Click to expand...
Click to collapse
Chose as a pit file ...There is a pit tab in odin 3.07 or 3.09.
Sent from my GT-N7100 using Tapatalk
Shady95 said:
i have to use .pit file alone or with PDA?
---------- Post added at 08:32 PM ---------- Previous post was at 08:14 PM ----------
Kies said that is impossible upgrade this device
Click to expand...
Click to collapse
Dont upgrade... there is an option of Initialize firmware, it will take you back to Stock ROM!
Step by step solution!!
Shady95 said:
i have to use .pit file alone or with PDA?
---------- Post added at 08:32 PM ---------- Previous post was at 08:14 PM ----------
Kies said that is impossible upgrade this device
Click to expand...
Click to collapse
I have done it twice so I think it shouldn't be a problem but let me guide you through it:
Install KIES and follow steps below
Step 1 : Click on Tools > Firmware Upgrade & Initialisation
Step 2: Enter Device information > Model Name and click OK.
Step 3: Enter Device's Serial Number (its in the battery compartment, you need to remove battery and note down the S/N)
Step 4 : Read the information and click OK
Step 5 : It will show you the available firmware available and ask to confirm
Step 6 : It will download components
Step 7 : Agree to terms and conditions and you are good to go!
arbaheti said:
I have done it twice so I think it shouldn't be a problem but let me guide you through it:
Install KIES and follow steps below
Step 1 : Click on Tools > Firmware Upgrade & Initialisation
Step 2: Enter Device information > Model Name and click OK.
Step 3: Enter Device's Serial Number (its in the battery compartment, you need to remove battery and note down the S/N)
Step 4 : Read the information and click OK
Step 5 : It will show you the available firmware available and ask to confirm
Step 6 : It will download components
Step 7 : Agree to terms and conditions and you are good to go!
Click to expand...
Click to collapse
kies show "the version of the device cannot be updated"
---------- Post added at 12:57 PM ---------- Previous post was at 12:54 PM ----------
ceomaverick said:
Chose as a pit file ...There is a pit tab in odin 3.07 or 3.09.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
didn't work
Shady95 said:
kies show "the version of the device cannot be updated"
---------- Post added at 12:57 PM ---------- Previous post was at 12:54 PM ----------
didn't work
Click to expand...
Click to collapse
Have you tried downloading Stock ROM and falsh it using ODIN??
arbaheti said:
Have you tried downloading Stock ROM and falsh it using ODIN??
Click to expand...
Click to collapse
yes but didn't work
Shady95 said:
yes but didn't work
Click to expand...
Click to collapse
Where did you download the Stock ROM from?
Have you tried one from sammobile.com ???
I have soft bricked my note 2 at least 5-7 times in past 2 years and the best solution I had was from KIES, second Best was Stock ROM from sammobile.com flashed via odin!!
arbaheti said:
Where did you download the Stock ROM from?
Have you tried one from sammobile.com ???
I have soft bricked my note 2 at least 5-7 times in past 2 years and the best solution I had was from KIES, second Best was Stock ROM from sammobile.com flashed via odin!!
Click to expand...
Click to collapse
yes i downloaded the ROMs from sammobile
Shady95 said:
yes i downloaded the ROMs from sammobile
Click to expand...
Click to collapse
can you tell me how did you try to flash Stock ROM??
Which ODIN are you using ( I used V 3.07)!
Oi, vou tentar te ajuda.
Me diz qual o modelo seu aparelho?
E a versao 4g?
---------- Post added at 05:52 PM ---------- Previous post was at 05:38 PM ----------
http://forum.xda-developers.com/showthread.php?t=2745828
Tente por aqui
Baixe este odin
E o recorvery, tente
Se nao der baixa a rom, tenta novamente.
Se nao der tem a opção mas arriscada que envolve abrir o aparelho e da um curto em um resitor
Still 4.4.4 though, apparently it's still just too much effort to update to 5.0.1.
Probably just the stagefright patch...
Beginning August 31, the Samsung Galaxy S 4 will have a optional software update to Android version 4.4.4/ Baseband M919UVUFOH3 via OTA or Samsung Kies. This update provides
New Features______________________Improvements
N/A______________________________Stagefright fix
Anyone know if this can be applied to an S4 with custom, rooted ROM & custom kernel? Or does it only work with a stock phone?
hella356 said:
Anyone know if this can be applied to an S4 with custom, rooted ROM & custom kernel? Or does it only work with a stock phone?
Click to expand...
Click to collapse
It would replace your installed ROM; if you're just looking for the new modem, there's a thread that has it posted in it (sorry, I'm on mobile, or I'd dig it up for you).
Sent from my SGH-M919 using XDA Free mobile app
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here: http://www.sammobile.com/firmwares/download/54333/M919UVUFOH3_M919TMBFOH3_TMB/
I had to restart my download several times to get it to finally download completely. Luckily, Firefox would restart where it failed each time, so didn't have to restart from beginning each time. But, it took quite a while - several hours.
BTW, I did a full NAND backup with TWRP before I started this.
Used ODIN 3.09
Flashed once, but the bootloader and modem didn't take, so I did the double flash, and it worked.
To double flash:
Unchecked AutoReboot in ODIN
Flash the firmware once
Pull battery
Boot holding down Vol-Down button to get back to Download mode
Flash again
The problem with the single flash was my WiFi wouldn't turn on, and when I checked out the versions of the ROM, bootloader, modem using Samsung PhoneInfo from the Play Store, I saw the dreaded mis-matched versions.
Some of my partitions were still NH7. Evidently Samsung keeps a backup of some of the partitions and restores them when the phone is rebooted. Double flashing flashes overwrites this backup.
I rooted with CF-AutoRoot again, installed SuperSU, and was back to where I was.
UPDATE:
Only issue so far is that I had to clear the cache on the Play Store. Was getting a services error.
Rob
Thanks for the update. My own download from Sammobile completed successfully (miracle!) And I am considering doing a phone wipe/double flash/rebuild. May choose stock ROM and freeze the junk. I'm on MDL bootloader at the moment and a fairly old LTE modem.
Before I do anything i have to figure out how to back up my texts (in Slimkat messenger app) such that I can restore them properly into the new environment.
Sent from my SGH-M919 using Tapatalk
rlichtefeld said:
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here: http://www.sammobile.com/firmwares/download/54333/M919UVUFOH3_M919TMBFOH3_TMB/
I had to restart my download several times to get it to finally download completely. Luckily, Firefox would restart where it failed each time, so didn't have to restart from beginning each time. But, it took quite a while - several hours.
BTW, I did a full NAND backup with TWRP before I started this.
Used ODIN 3.09
Flashed once, but the bootloader and modem didn't take, so I did the double flash, and it worked.
To double flash:
Unchecked AutoReboot in ODIN
Flash the firmware once
Pull battery
Boot holding down Vol-Down button to get back to Download mode
Flash again
The problem with the single flash was my WiFi wouldn't turn on, and when I checked out the versions of the ROM, bootloader, modem using Samsung PhoneInfo from the Play Store, I saw the dreaded mis-matched versions.
Some of my partitions were still NH7. Evidently Samsung keeps a backup of some of the partitions and restores them when the phone is rebooted. Double flashing flashes overwrites this backup.
I rooted with CF-AutoRoot again, installed SuperSU, and was back to where I was.
UPDATE:
Only issue so far is that I had to clear the cache on the Play Store. Was getting a services error.
Rob
Click to expand...
Click to collapse
please.. can you tellme about this:
right now I am on a T-Mobile rooted so this its features on my cell:
SGH-M919
Version: 4.4.2
Band: M919UVUFNB4
Kernel: 3.4.98-KT-SGS4-KK4.4-TW-TMO-07.12.2014-ktoonsez #1
hadware version: REV0.7
Software version: MDF v1.0 Release 2
Click to expand...
Click to collapse
---can my cell update directly to this firmware using ODIN ?
---or I need to be unroot first and then install this firmware?
---or I need to upgrade my modem to the last and then install this firmware via Odin?
please can you tellme about this ? ... thanks
boni7010 said:
please.. can you tellme about this:
right now I am on a T-Mobile rooted so this its features on my cell:
---can my cell update directly to this firmware using ODIN ?
---or I need to be unroot first and then install this firmware?
---or I need to upgrade my modem to the last and then install this firmware via Odin?
please can you tellme about this ? ... thanks
Click to expand...
Click to collapse
If you flash this firmware from SamMobile. It will overwrite your modem to the newest. It will un-root your phone. And, yes you can go directly to this version from your NB4 version.
So, after you flash this firmware you will have the newest modem. And, you will have to root your phone again.
ROM = ROM
Firmware = Modem + bootloader + ROM
Rob
rlichtefeld said:
If you flash this firmware from SamMobile. It will overwrite your modem to the newest. It will un-root your phone. And, yes you can go directly to this version from your NB4 version.
So, after you flash this firmware you will have the newest modem. And, you will have to root your phone again.
ROM = ROM
Firmware = Modem + bootloader + ROM
Rob
Click to expand...
Click to collapse
Muchas Gracias!
Many, many thanks... ok.. I have a tutorial from this site to flash via Odin a old firmware...
Please can any tellme if need a new tutorial or can use the same? ( check and uncheck some options on Odin before flashing ) ...
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
frustrated foh3
This morning OTA pushed the new update to my phone and I accepted thinking there was a lollipop update finally. I had juke woken up and didn't bother to check first.
Anyway, I'm now on FOH3 and am just trying to install custom recovery on my otherwise un-molested phone. I've tried the heimdall option as well as the cf-auto root with odin 3.09 (even attempted the double flash) either I'm doing something wrong with Odin or missing a step because when I hit start I end with 0 succeeded/0 failed and it stays in download mode. When I attempt to reboot to recovery mode, I get the blue text stating booting recovery and then black screen which eventually just goes back to stock.
Is there some other method I need to try when rooting/installing trwp for FOH3?
[edit: I'm an idiot. assumed I already had debugging turned on. I did not. *facepalm*]
-thanks in advance
I haven't flashed a phone since my galaxy s blaze 4g.
any other link other than from sam mobile??
DMD567 said:
any other link other than from sam mobile??
Click to expand...
Click to collapse
Look here:http://forum.xda-developers.com/gal...mware-firmware-kernel-modem-recovery-t3193835
rlichtefeld said:
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here: http://www.sammobile.com/firmwares/download/54333/M919UVUFOH3_M919TMBFOH3_TMB/
Rob
Click to expand...
Click to collapse
I download this file from the link .... so I get a zip file in my pc called "M919UVUFOH3_M919TMBFOH3_TMB" its a 1.56 gb... did I need to open this zip file? or take this zip file and put on Odin 3.09 in AP / PDA ?
because I open the zip file in my pc and have two files:
- SS_DL.dll
- M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5 ( 2.5 gb )
Click to expand...
Click to collapse
I think the one what I need to put on Odin its the last file "M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5" right?
but the other file " SS_DL.dll " for what reason came inside the zip file ?
I read need double flash... with " Unchecked AutoReboot" in Odin... but please can you tellme what more choices I need to check or unchecked in Odin to start flash this firmware ?
and if I need to uninstall kies from my laptop and install another Samsung drivers... or with the drivers came in Samsung Kies its ok to start flash this firmware?
thanks thanks thanks ....
boni7010 said:
I download this file from the link .... so I get a zip file in my pc called "M919UVUFOH3_M919TMBFOH3_TMB" its a 1.56 gb... did I need to open this zip file? or take this zip file and put on Odin 3.09 in AP / PDA ?
because I open the zip file in my pc and have two files:
I think the one what I need to put on Odin its the last file "M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5" right?
but the other file " SS_DL.dll " for what reason came inside the zip file ?
I read need double flash... with " Unchecked AutoReboot" in Odin... but please can you tellme what more choices I need to check or unchecked in Odin to start flash this firmware ?
and if I need to uninstall kies from my laptop and install another Samsung drivers... or with the drivers came in Samsung Kies its ok to start flash this firmware?
thanks thanks thanks ....
Click to expand...
Click to collapse
Just flash the md5 file via Odin. That's all!
boni7010 said:
I download this file from the link .... so I get a zip file in my pc called "M919UVUFOH3_M919TMBFOH3_TMB" its a 1.56 gb... did I need to open this zip file? or take this zip file and put on Odin 3.09 in AP / PDA ?
because I open the zip file in my pc and have two files:
I think the one what I need to put on Odin its the last file "M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5" right?
but the other file " SS_DL.dll " for what reason came inside the zip file ?
I read need double flash... with " Unchecked AutoReboot" in Odin... but please can you tellme what more choices I need to check or unchecked in Odin to start flash this firmware ?
and if I need to uninstall kies from my laptop and install another Samsung drivers... or with the drivers came in Samsung Kies its ok to start flash this firmware?
thanks thanks thanks ....
Click to expand...
Click to collapse
Yes, you unzip the file to your computer. The .tar.md5 file is the one that you browse to and select in Odin.
Uncheck everything in Odin. Then, flash this firmware twice, with out letting your phone boot into the system. After the first flash is finished. Pull the battery. Put the battery back in and hold the Volume Down button while you power on the phone. This will put you back in Download mode. Then, flash the same firmware again.
After that second flash, you can boot your phone into the system normally.
Rob
rlichtefeld said:
Yes, you unzip the file to your computer. The .tar.md5 file is the one that you browse to and select in Odin.
Uncheck everything in Odin. Then, flash this firmware twice, with out letting your phone boot into the system. After the first flash is finished. Pull the battery. Put the battery back in and hold the Volume Down button while you power on the phone. This will put you back in Download mode. Then, flash the same firmware again.
After that second flash, you can boot your phone into the system normally.
Rob
Click to expand...
Click to collapse
"Uncheck everything in Odin".. "Auto Reboot , and F. Reset Time" unchecked ?
and on the second flash, the same or check this two ?
boni7010 said:
"Uncheck everything in Odin".. "Auto Reboot , and F. Reset Time" unchecked ?
and on the second flash, the same or check this two ?
Click to expand...
Click to collapse
If you really wanted to, you could leave those two checked on the second flash.
However, leaving them unchecked on both flashes will work, and are the easiest instructions to follow.
Rob
Oh no.. show this :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
on the blue corner say "failed"
any wrong ???
boni7010 said:
Oh no.. show this :
on the blue corner say "failed"
any wrong ???
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1622790. If that doesnt work try DIFFERENT usb cables (official works best), verisions of odin and different usb ports. Make sure usb debugging checked and power down and pull battery, then put battery back and (while its off) hold just vol down then plug it in to the computer while odins open. If this stuff doesnt work it could be motherboard (its probably not though, dont worry). Good Luck, keep trying.
rlichtefeld said:
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here:
I had to restart my download several times to get it to finally download completely. Luckily, Firefox would restart where it failed each time, so didn't have to restart from beginning each time. But, it took quite a while - several hours.
BTW, I did a full NAND backup with TWRP before I started this.
Used ODIN 3.09
Flashed once, but the bootloader and modem didn't take, so I did the double flash, and it worked.
To double flash:
Unchecked AutoReboot in ODIN
Flash the firmware once
Pull battery
Boot holding down Vol-Down button to get back to Download mode
Flash again
The problem with the single flash was my WiFi wouldn't turn on, and when I checked out the versions of the ROM, bootloader, modem using Samsung PhoneInfo from the Play Store, I saw the dreaded mis-matched versions.
Some of my partitions were still NH7. Evidently Samsung keeps a backup of some of the partitions and restores them when the phone is rebooted. Double flashing flashes overwrites this backup.
I rooted with CF-AutoRoot again, installed SuperSU, and was back to where I was.
UPDATE:
Only issue so far is that I had to clear the cache on the Play Store. Was getting a services error.
Rob
Click to expand...
Click to collapse
tried double and even quad flash, but wifi and 4g still doesn't work, I think it's about kernel, it remains same old