Related
How To Re-Flash Stock Image
Assuming you have ADB and everything setup already....
1. I just did this for practice. I did not need to do it –but I wanted to do it successfully before I “needed” to do it. I thought I would expand a little on the process and make it a little more noob friendly.
2. Getting started.
a. Read through the entire set of instructions first.
b. I am not responsible if you BORK your phone. I BORKED mine using someone else’s instructions and tried to write a very detailed step-by-step to help others out– but it is completely possible I have also made some small error in the instructions.
3. This will completely wipe your phone – including the SD partition – so transfer any files you need before you do this.
4. This will not re-lock your bootloader. It will remain unlocked.
5. Syntax (spelling, spaces, periods, dashes, CAPITOL, or lower case) matters. There were some spelling errors and file extensions left off the commands – and that will not work.
6.I used the file…
mysid-icl53f-factory-65895fa8.tgz
…which is 4.0.2 for the cdma/lte galaxy nexus [code name = toro/mysid]. The file is located here...
http://www.google.co...NiI9yTxKdUyW1tA
7. Unzip the file (I used 7.zip to do this).
Then you will have a .tar file…
mysid-icl53f-factory-65895fa8.tar
8. Unzip that file and you should end up with a folder…
mysid-icl53f
Inside that folder you will have five files…
i. bootloader-toro-primekk15.img
ii. flash-all.sh
iii. radio-cdma-toro-i515.ek05.img
iv. radio-toro-i515.ek02.img
v. image-mysid-icl53f.zip
Do not unzip “image-mysid-icl53f.zip”
9. Go ahead and copy and paste all these files to your directory…
/android/platform-tools
(or whatever directory you work from. You do not need the “flash-all.sh” so you do not have to copy it).
10. Open the Command Prompt in the directory where you have placed the necessary files by navigating to the directory, pressing shift, and then right mouse click (normally “C: /android/tools” or C: /android/platform-tools). This will bring up the dialogue box and you can select “open a command window here”.
11. Then enter the command…
adb devices
[…this should return your serial number…]
12. enter the command…
adb reboot-bootloader
[wait for bootloader – you should here 2 alert sounds – not just 1]
13. enter the command…
fastboot flash bootloader bootloader-toro-primekk15.img
14. enter the command…
fastboot reboot-bootloader
[wait]
15. enter the command…
fastboot flash radio radio-toro-i515.ek02.img
16. enter the command…
fastboot reboot-bootloader
[wait]
17. enter the command…
fastboot flash radio-cdma radio-cdma-toro-i515.ek05.img
18. enter the command…
fastboot reboot-bootloader
19. enter the command…
fastboot -w update image-mysid-icl53f.zip
20. So you know, steps 17 (flashing the cdma radio) and step 19 (flashing the update image) took longer than the rest so don't freak out - just be patient. If you did the steps in the proper order after entering the last command your phone should reboot on its own and be completely “fresh”. If you made mistakes (like I did the first time) and flashed the radios out of order (like I did) or did not wait long enough for an “Okay” dialogue (like I did) then when you reboot you will have no signal and no phone number and you will have to go through the process again and do it right (like I did).
Hope this helps someone.
Credit goes to JW at that other site for the fastboot commands. I just added detail for the write up.
Great guide, but what if the serial number doesn't show up?
Thank you for the excellent walkthrough. I am following it, but when I enter "adb devices" at the command prompt I receive "list of devices attached" but no serial number. Also, my Nexus displays: "Fastboot Command Read Error -2147483647". I did a battery pull after getting stuck in a bootloop, and am trying to recover. I can unlock and relock the bootloader, but that is the only command that is working.
Ominous39061 said:
Thank you for the excellent walkthrough. I am following it, but when I enter "adb devices" at the command prompt I receive "list of devices attached" but no serial number. Also, my Nexus displays: "Fastboot Command Read Error -2147483647". I did a battery pull after getting stuck in a bootloop, and am trying to recover. I can unlock and relock the bootloader, but that is the only command that is working.
Click to expand...
Click to collapse
if it does not return a serial number than the phone is not being recognized. I believe that there are 2 different sets of drivers that are needed. Let me look for the link and info.
the fact that it returns "list of devices attached" but no number means that it is not finding your device which means it is probably a driver issue. let me see what I can come up with. But I am no expert at any of this.
Ok - so I just did some testing of my own. I ran into the same problem as you. And I know that I have the drivers installed. So what I did was try and "shut down" any thing that could interfere with with ADB/Fastboot.
Any tethering apps that you may have - PDA NET, Easy Tether, etc, could possibly do this. Also - when you plug your phone in - and the Auto Play options pop up for FTP (File Transfer Protocol) - X out of that.
I initially plugged in my phone. Opened the command prompt in my platform-tools folder. typed in...
adb devices
...and I got the same message as you. I then "turned off" everything that could be causing problems with the process. I unplugged the phone and replugged it in (and closed the dialog box again) and then re-opened the command prompt and entered...
adb devices
...and then I got the proper return message.
thepolishguy said:
Ok - so I just did some testing of my own. I ran into the same problem as you. And I know that I have the drivers installed. So what I did was try and "shut down" any thing that could interfere with with ADB/Fastboot.
Any tethering apps that you may have - PDA NET, Easy Tether, etc, could possibly do this. Also - when you plug your phone in - and the Auto Play options pop up for FTP (File Transfer Protocol) - X out of that.
I initially plugged in my phone. Opened the command prompt in my platform-tools folder. typed in...
adb devices
...and I got the same message as you. I then "turned off" everything that could be causing problems with the process. I unplugged the phone and replugged it in (and closed the dialog box again) and then re-opened the command prompt and entered...
adb devices
...and then I got the proper return message.
Click to expand...
Click to collapse
I got the same problem with mine i dont have anything like pda net installed but nothing i have tried is able to get adb to list my phone
Getting the same issue myself...help!
Thank you so much I'm a total noob with this stuff but your guide was very helpful!
Noev said:
I got the same problem with mine i dont have anything like pda net installed but nothing i have tried is able to get adb to list my phone
Click to expand...
Click to collapse
ChuckTu said:
Getting the same issue myself...help!
Click to expand...
Click to collapse
Ok - so another member posted this...
ADB/Naked Drivers
...and I have heard some people say that it was very helpful. So hopefully this will help you guys to get your devices recognized.
Then there is also this thread and the OP said this...
Code:
On your windows PC. Use the root guide by bman
( [url]http://rootzwiki.com...nlock-and-root/[/url] )
and download the third option for drivers. Extract all
of these tho wherever you have your fast boot
( for me it was c:/users/thatmayh3mguy/) then run
fastboot in the cmd. The adbapi.DLL file will be there
and will make the fast boot work. I didn't have the sdk
installed ( fresh install of win 7 ultimate last week and
don't have it all set up yet) and it worked
thread...
adb help/getting your drivers installed correctly
OK - here is also another method that I found. I have PDA Net installed and I did not have any issues with fastboot. Here are some instructions that say the drivers that PDA Net use are the same drivers that you need for fastboot. So here is a link to the thread and hopefully one of these methods is going to work for you.
Installing PDA Net to solve your fastboot problems
ah ha - just read something else that I should have thought of...
If your phone is already in bootloader - the command...
adb devices
...will not work. so if you are in bootloader you should try the command...
fastboot devices
...instead and see if that returns anything for you.
just wanted to jump back in hear and say i was able to get mine working again. adb was allowing me to lock/unlock the bootloader i toggled that on and off then when i went to boot my phone it took a long time to boot but finally did. Thanks for all the help was in a real jam there for a minute. I used the naked adb drivers posted above not sure if that did anything but it worked for me. Thanks again!
Noev said:
just wanted to jump back in hear and say i was able to get mine working again. adb was allowing me to lock/unlock the bootloader i toggled that on and off then when i went to boot my phone it took a long time to boot but finally did. Thanks for all the help was in a real jam there for a minute. I used the naked adb drivers posted above not sure if that did anything but it worked for me. Thanks again!
Click to expand...
Click to collapse
cool. glad to hear it.
trying this with a Linux OS
So I have a Samsung Galaxy Nexus on Verizon and I put 4.0.4 (IMM30B) using the Galaxy Nexus ToolKit on Windows. Since then I've had a few issues with performance so I want to go back to stock (ICF53F) then maybe goto latest IMM76K (I think). I've retrieved the zip file from steps above and untar'd the file, but when I try to flash the boot file it just sits there waiting for device. I'm not sure what it's waiting for. I'm in fastboot mode and then plugged in the phone to the usb cord but nothing happens.
Any ideas?
UPDATE:
I figured out the issue. On a linux machine using fastboot requires super user privileges. Maybe an update to the instructions may be in order?
CMD keeps telling me waiting for device.
How long will it takes first time?
this after entering: fastboot flash bootloader bootloader-toro-primekk15.img
ladyminnie said:
CMD keeps telling me waiting for device.
How long will it takes first time?
this after entering: fastboot flash bootloader bootloader-toro-primekk15.img
Click to expand...
Click to collapse
Does "fastboot devices" return your device?
If not, you may have a driver issue.
Sent from my Galaxy Nexus using Tapatalk 2
A mistake I made a while ago, if you are sure that you have already installed ADB drivers, and your device still isn't being recognized by ADB..
Be sure USB Debugging is checked on.
Sent from my Galaxy Nexus using Tapatalk 2
adb devices returns my number from the phone
adb reboot-bootloader does bring my phone into bootloader
than it stops with the next command. I waited for 45 minutes/
---------- Post added at 07:03 PM ---------- Previous post was at 06:57 PM ----------
usb debugging was/is still on
The white small led is lightning up every 10 seconds orso
problem solved with:
http://forum.xda-developers.com/showthread.php?t=1766475
Hi, I am afraid I brick my Galaxy Nexus (Rooted)
Cause:
I think I wrongly delete some system files in Clockworkmod.
Symptoms:
1. When the mobile is turn on, only shows 'Google' logo and the 'Unlock' logo, no responds then.
2. Press Volume + and - key, I can successfully enter recovery mode.
3.Press Volume - key, I can successfully enter Download mode.
4. I do not have any Stock Rom file (or other Rom file) in the mobile memory.
Urgently need your expertise and help.
Many Thanks
(I am not an expert, so would you mind teach me step by step if you got the solution)
Thanks!!!!
So you cannot boot the phone at all past the Google splash screen? LTE or GSM?
Or does the phone boot fine, but you just can't get into ClockworkMod Recovery?
cbs2002 said:
Hi, I am afraid I brick my Galaxy Nexus (Rooted)
Cause:
I think I wrongly delete some system files in Clockworkmod.
Symptoms:
1. When the mobile is turn on, only shows 'Google' logo and the 'Unlock' logo, no responds then.
2. Press Volume + and - key, I can successfully enter recovery mode.
3.Press Volume - key, I can successfully enter Download mode.
4. I do not have any Stock Rom file (or other Rom file) in the mobile memory.
Urgently need your expertise and help.
Many Thanks
(I am not an expert, so would you mind teach me step by step if you got the solution)
Thanks!!!!
Click to expand...
Click to collapse
The key piece of information for your symptom is in this line:
1. When the mobile is turn on, only shows 'Google' logo and the 'Unlock' logo, no responds then.
The other lines do help provide background as to the other modes such as recovery and download working properly, which indicates the issue is not *serious*.
The symptom you state, where the device does not boot past the boot logo, usually means the device is not able to boot the kernel or boot past the kernel. The boot logo appears while the kernel is being loaded on the device. Generally, after the boot logo and kernel finish loading a boot animation appears which indicates the kernel has usually handed off to the Android OS to continue booting.
My approach would be to load a completely stock ROM in order to restore a working kernel and ROM to the device. I generally perform this step as a baseline to get everything back in working order.
In many instances the ROM is dependent on the kernel. Your situation requires at least a kernel to be loaded and in order to prevent any further issues, it would be best to load a ROM dependent on the kernel being loaded.
A simple way would be to grab the stock factory images from Google's site and load those back onto the device.
Another simple way would be to grab a stock ROM and flash the .zip through CWM in recovery mode.
Hope that helps!
Since you're rooted I'm going to assume you have ADB and the necessary drivers installed.
1.) Download a ROM. It doesn't have to be stock, you can choose any of the ROMs from the development section for your device. Most of the ROMs are packaged with a kernel already.
2.) Save this ROM file to the same folder where you have ADB installed.
3.) Boot your phone into CWM recovery and plug it into your computer.
4.) Use ADB to push the ROM zip file to your phone (/data/media). For example:
Code:
c:\gnex\>adb push rom.zip /data/media/rom.zip
5.) Use CWM to wipe data, cache, and davlik-cache
6.) Install zip from sdcard and flash the rom.zip.
RMarkwald said:
So you cannot boot the phone at all past the Google splash screen? LTE or GSM?
Or does the phone boot fine, but you just can't get into ClockworkMod Recovery?
Click to expand...
Click to collapse
1. I am using GSM
2. Whenever I turn on my mobile, the 'Google' and 'Unlock' logo appears and then freeze, with no more respond at all
* I definitely mess up some system files, but don't know how to restore it because my PC do not recognize my mobile.
Thanks
I am seeing more and more of these threads about "bricked" nexus's is this an issue with how new the phone is or people not following instructions properly as they are too eager to root their phones?
All else fails flash back to stock and count yourself lucky.
To silow,
Thanks for your advice, but fail
1. I put adb.exe, adbwinapi.dll and fastboot.exe (3 files) under my PC C drive (i.e. C
2. I also put a stock Rom (rename as rom.zip) under C drive (i.e. C
3. Boot phone into CWM recovery and plug it into computer.
4. Use cmd command and type c:\gnex\>adb push rom.zip /data/media/rom.zip
5. It fails , It say "Access Denied" (in Chinese, but I translate it into English here)
6. How do I use ADB (it is a ADB.exe file, When I double click it, it only flash up a few page very fast and nothing happen)
Please assist!
To Joeykrim,
I agree that
"Another simple way would be to grab a stock ROM and flash the .zip through CWM in recovery mode."
But how? (according to my symptoms)
The command I gave you was just an example. I didn't spell out the exact details because I thought that you would know how to do it considering you rooted the phone.
If you put the adb.exe and AdbWinApi.dll file in your C: drive, make sure you copy the ROM file to your C: drive too. In the follow example I'm going to use "ROM.zip" but use the name of the ROM file that you downloaded. Also I am assuming you are on Windows XP.
1.) Boot your phone into CWM recovery and then plug it in.
2.) Go to your Start Menu and choose Run. Then type in "cmd" without quotes and hit enter to open a command prompt.
3.) Enter:
Code:
cd c:\
4.) Enter the following to make sure ADB can see your phone:
Code:
adb devices
You should see something similiar to this to confirm ADB can see your device:
List of devices attached
019B756F0C018012 device
5.) Enter the following command to copy the ROM file to your phone. Remember to replace ROM.zip with whatever the name of the ROM file is:
Code:
adb push ROM.zip /data/media/ROM.zip
6.) Use CWM to wipe data, cache, and davlik-cache
7.) Install zip from sdcard and flash the rom.zip.
To Silow,
You have been very helpful, but I fail.
"You should see something similiar to this to confirm ADB can see your device:
List of devices attached"
There is NO device number shown after the phrase 'List of devices attached'
To recap:
a) Phone is already plugged in my PC, under the Clockworkmod Recovery 5.5.0.2
b) adb.exe and AdbWinApi.dll file are under C: drive directly
c) Also type cmd in 'Run', a black Dos window shown C:\windows\system32\cmd.exe
d) c:\>adb devices
List of devices attached
(But no device number show up, it cannot recognize my mobile)
Pls don't give up on me!
: )
you can't use adb from CWM, you need to enter the bootloader, then try adb or fastboot (edit: wrong!)
Sounds like your ADB USB drivers are not correctly installed. While the phone is under CWM, when you plug it in is your computer attempting to install drivers for a new device?
Download these bare ADB Interface drivers.ADB USB Drivers
Go into Device Manager on your computer and check the device list for any unknown devices or "?" devices. If you need to update those drivers by pointing them to the drivers you downloaded and extracted from that link above.
When the ADB Interface drivers are correctly installed you should see Android Phone listed under under your Device Manager when it's plugged in with CWM recovery loaded.
---------- Post added at 02:36 PM ---------- Previous post was at 02:35 PM ----------
cancerouspete said:
you can't use adb from CWM, you need to enter the bootloader, then try adb or fastboot
Click to expand...
Click to collapse
You CAN use ADB with CWM. That's one of the reasons why CWM is so awesome.
silow said:
You CAN use ADB with CWM. That's one of the reasons why CWM is so awesome.
Click to expand...
Click to collapse
edit: i did appear to have one missing driver, my mistake. it was listed in device manager as "unknown - full"
its funny cause i never had to use adb from cwm before, never noticed
cbs2002 said:
d) c:\>adb devices
List of devices attached
(But no device number show up, it cannot recognize my mobile)
Click to expand...
Click to collapse
This symptom generally occurs from not having loaded the drivers for the hardware. As with the majority of hardware devices when being connected to a Windows machine, the drivers need to be loaded. Sometimes these are automatically loaded and other times they have to be manual loaded.
As an alternative and for future reference, the android-sdk package contains general USB drives which usually work for Google Nexus devices.
Generally, as this providers a *cleaner* install, best practice as recommended by Google is to download the whole android-sdk .zip and then from the installer download/install the pieces needed, such as platform-tools (containing adb) and USB drivers as opposed to extracting out the adb.exe and .dll file and installing manually.
cancerouspete said:
you can't use adb from CWM, you need to enter the bootloader, then try adb or fastboot
Click to expand...
Click to collapse
silow said:
You CAN use ADB with CWM. That's one of the reasons why CWM is so awesome.
Click to expand...
Click to collapse
Agreed. To add greater clarification so there is no confusion: adb can't be used from the bootloader.
The /sbin/adbd daemon on the device is only loaded while in normal android boot mode or in recovery mode as called by the init.rc (or on some older devices, recovery.rc) file in the boot process.
Bootloader mode will only work with fastboot while it is in fastboot usb mode.
On some devices, the bootloader has a separate menu for fastboot and on other devices, the fastboot mode is directly entered when entering the bootloader.
Hope that helps clarify!
To silow (and all other helpers)
1. I fail
2. The ADB USB drivers in my PC should be fine as in Device Manager , I can see Android Phone with Android Composite ADB Interface. (No exclamation mark)
3. On the other hand, whenever I plug my mobile into PC, I can see "Unknown-Full"
4. In DOS, when I first type "adb devices" it shows
* daemon not running. starting it now on port 5037*
*daemon started successfully *
List of devices attached
(but NO device number shown!)
5. When I enter adb devices second time, it shows
List of devices attached (No device number shown)
Thank you so much , but it is Hong Kong time (my place) at 0511 am , I didn't sleep all night and I am very tired.
If you don't mind (especially big helper Silow), please give me email so that I capture screen picture and show you in detail (hope it may help)
my email is
[email protected]
I need to sleep now, I will check my email and see you guys or come back this Forum later (several hours later, as I really need some sleep right now)
Pls don't give up on me as this is an expensive mobile. I think the hardware is fine, just need to figure out a way to unbrick it.
Thanks, and see you!
What you need to do is right click on "Unknown-Full" and click on "Update Driver...". Then choose "Install from a list or specific location". Make sure "Search for the best driver in these locations." is checked and "Include this location in the search:" is check. Click on the Browse button and browse to where you extracted the driver files from the link I posted above. Click Next and this should install the correct drivers for you. Afterwards try "adb devices" again to see if ADB now reconizes your device.
To Silow,
Fail.
1. Already installed the drivers you gave me (and there is no 'Exclamation' Mark) in Device manager
2. Situation is the same , Cannot recognize my mobile (i.e. no Device No. after entering adb devices)
3. "List of devices attached" shown in DOS video but without any number.
No other method?
My mobile is really 'bricked' to death?
To Silow and all,
Something important
1. When choose 'install zip from sd card' under CWM, a list of old folder names remains
(e..g gameloft, DCIM, Pictures, etc). That means almost all old files, folders are STILL in my mobile!
2. I have already use the funcion 'Wipe data/factory reset', 'wipe cache partition', ' Wipe Dalvik Cache'
Perhaps my CWM has problem?
What happens when you update drivers for Unknown-Full?
Boot into fastboot and see if your computer recognizes the phone by checking device manager. The key here is to get your computer to see the phone either in fastboot or CWM.
Perhaps try another cable, USB port, or new computer.
The goal is to get Android Phone ADB Composite Interface to show up in device manager either in Fastboot or CWM. Without that done you cannot use Fastboot to flash nor ADB to push a zip file to the phone.
Sent from my Galaxy Nexus using XDA App
Oh dear, am a noob, please forgive me!!
I have a Kindle Fire HD 8.9, rooted it OK, then followed "Installing Kindle Fire HD 8.9" 2nd-Bootloader + TWRP Complete Tutorial" to install TWRP.
Everything seemed ok, then got stuck on blue/white logo, so got into TWRP hoping somehow I could move a rom on there to flash it. Now I'm in TWRP , the Kindle won't show up on My Computer, so how do I do this? I did try pressing "mount" but nothing happened.
I've searched forums but am just getting more confused!!
Maybe the drivers are wrong, but I don't know how to fix that.
Tried looking at "[HOW-TO] ADB Push a ROM to your phone"http://forum.xda-developers.com/showthread.php?t=1667929, it tells me to find where my ADB is on my PC's hard drive, but I can't find anything that says AndroidSDK on my c:drive.
Oh God!! Am I doomed???
Please can someone kind help me??
Thanks guys
6. Wiped /sdcard, can't reboot from recovery: You thought you had the ROM file on the sdcard, but you didn't, and wiped everything, so without a ROM image, you can't boot into system.
Solution: Put the ROM file where your ADB binary is (usually inside platform-tools folder in Android SDK directory) and rename it rom.zip. On the device, boot into TWRP, select Advanced, then ADB Sideload. Connect device to PC. From here, run "adb" and hit Enter to check for your binary version, if it's anything lower than 1.0.3.0, you need to update the binaries by re-installing the latest Android SDK. Once the device is in sideloading mode and is connected to the PC, type "adb sideload rom.zip" and hit Enter. Now you'll find the ROM on the sdcard, flash, and you're done.
http://forum.xda-developers.com/showthread.php?t=2277105
mfg
German JPL
Thank you German JPL,
I did try to follow this trobleshooting bit at the end, but I'm kinda stumped by the fact I don't know where this "ADB binary is (usually inside platform-tools folder in Android SDK directory)"
I'm on Windows 7 and there's no such thing on my c:drive. Under User, there is an ".android" folder, but I don't think that's it.
Hi pixie67,
sorry for my bad english, I'm a German speaking English writer.
in what way do you have adb drivers and fastboot drivers installed?
when did you proceed to the manual, you would still have a folder with android sdk?
===== 5. What is Android SDK, ADB, and Fastboot? =====
Android SDK is a package with the tools for an Android developer to modify devices and collect data to help them create builds and maintain a device. Included in the package is what we commonly use around here in the development world, called ADB (Android Debug Bridge) and Fastboot. ADB allows a computer to communicate with a device by means of a USB cable, allowing a developer to push and pull data between the two devices, and this is the way some root methods are discovered.
Fastboot is the term we use to refer to a diagnostic tool built into Android. This is because fastboot is the first thing a developer turns to when their device is bricked. Factory cables are designed to power the devices into fastboot, and that's all they're really good for. While ADB is for communication between two devices, pushing and pulling data, fastboot is all about writing data into the partitions on a device. We call this process "flashing". This is only for the 7 version of the device, the 8.9 version does not require the factory cable.
Generally, ADB commands in command prompts start with "adb" (i.e. "adb reboot bootloader" which commands a typical Android device to boot into bootloader mode, another name for fastboot mode). ADB commands can only be used when both devices are fully booted up, and ADB debugging is selected on the Android device. After the device boots into fastboot, the device no longer recognizes ADB commands, only fastboot commands. Likewise, in fastboot mode, commands begin with "fastboot" (i.e. "fastboot oem unlock" which unlocks the bootloader on many Android devices). While in fastboot mode, the only safe way to exit is by typing "fastboot reboot" although the usual power button will be fine for most cases.
On the Kindle Fire HD 7" and 8.9", you will notice that the fastboot commands look something like this: "fastboot -i 0x1949 flash boot boot.img" ("flash" is the command to flash a file, "boot" is the partition to flash the file into, and "boot.img" is the image file containing the booting information). The reason why there's a "-i 0x1949" is simply because of the locked-down bootloader. After we install the 2nd-bootloader, this part commands the device to flash the files into the stock bootloader, because the 2nd-bootloader doesn't accept fastboot commands.
To install the Android SDK and be able to use ADB + fastboot, go to this link: Android SDK. After you hit download, just be patient, and you will need a video reference to help set up the package properly, so click here: Video on Installation of Android SDK. To check if it installed properly, once you're done with the video, open up a command prompt (for Windows, hold the Windows key + R, and type cmd, then hit Enter), and type either "adb" or "fastboot" and hit Enter. For both cases, you should get a block of text that tells you what each command does.
To check if your device can work with ADB, enable ADB on the device (may be called USB debugging), and connect it to the computer. If there are any drivers installing, let them finish. Then, on the command prompt, type "adb devices" and hit Enter. If your ADB drivers work, you should see a line of letters and characters. Same thing with fastboot. Always do this check before you start messing around to make sure your devices are receiving the commands.
Click to expand...
Click to collapse
I have windows 7 and when I enter in the search window windows sdk, I find the folder.
mfg
GermanJPL
Hello,
I installed KindleADB.exe for the drivers. That seemed successful. I managed to root it ok,
My Kindle, in TWRP shows up in device manager as Android Phone/Android ADB interface.
I can boot into fastboot from the options in TWRP.
I've updated the android SDK package and rebooted my computer.
I can't use ADB sideload, it just sticks on "starting ADB sideload feature...."
If I reboot to system, I just end up on the white/blue logo.
I don't know what to do next
I do not understand ... have you thought you were the instructions?
you've got installed 2nd Boot Loader & TRWP after manual with ADB and fastboot .... ? why are you not looking adb.exe, then you have your folder
or you install you Andrid sdk subsequently follow the instructions, then you've got everything you need.
German JPL
I don't really understand your answer German, I've followed the instructions, but I'm still stuck on the boot screen, or in TWRP with no way to flash a ROM as there is no ROM on the device and I can't transfer a rom onto the device because mounting doesn't work and Adb sideload doesn't work.
So I'm stuck.
Help!
You have written the sideload does not work because the can not find the sdk folder. Did you find it now and sideload does not work?
Before you experiment still around for hours, start your Kindle in fastboot and play the 3 img a backup folder.
After that you start from scratch and copy before the Rome and gapps on the Kindle.
German JPL
GermanJPL said:
You have written the sideload does not work because the can not find the sdk folder. Did you find it now and sideload does not work?
Before you experiment still around for hours, start your Kindle in fastboot and play the 3 img a backup folder.
After that you start from scratch and copy before the Rome and gapps on the Kindle.
German JPL
Click to expand...
Click to collapse
I can't find a SDK folder anywhere, I've searched, I've enabled hidden folders. I don't know if this is why the ADB sideload option doesn't work, but it doesn't, it just hangs there.
I can start the Kindle in fastboot, there is a message saying "installing device driver software", then another, confirming the ADB driver software has been successfully installed. In device manager I now see
Kindle Fire listed with android adb interface.
I don't know what "play the 3 img a backup folder." means. I'm sorry. While I'm in fastboot mode, I'm not sure what to do. Can you tell me?
And I don't know how to start from scratch as I can't copy anything anywhere. Although I can see the Kindle in device manager, I can't get to it in windows explorer.
The problem is, I didn't copy the ROM and GAPPS onto the Kindle before installing TWRP and now I can't.
Oh dear, I'm sorry to be so frustrating!! Thank you for trying to help though xx
Step 2: Grabbing Files and Backing Up
Once you're rooted successfully, you need to grab the files we'll need for the installation. Go to Hashcode's thread: Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 8.9. Download ONLY two files: the TWRP recovery image, and the freedom-boot image. That's all, and transfer both of those to the root of the sdcard, now you can move on to Step 3: Installation if you wish to skip backing up.
I will go through the steps to backup. Remember that it is not mandatory that you do this; should you follow the guide very closely, you do not require backing up whatsoever. This just serves as an extraneous step for those who feel comfortable working with ADB and would like to participate in modding the device, in which case these files would come in handy in case the device is bricked. Again, it is NOT mandatory.
Connect the device to the computer through a normal USB cable, turn on ADB through settings. Open up the command prompt (CMD) on your computer: hold down the Windows key, and press R. This will open up Run, type "cmd" and hit Enter. Now, enter the following lines of code one-by-one, wait for a line to finish before going to the next one.
Code:
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/boot of=/sdcard/stock-boot.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery of=/sdcard/stock-recovery.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/system of=/sdcard/stock-system.img"
mkdir C:\KFHD8Backup
adb pull /sdcard/stock-boot.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-recovery.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-system.img/ [C:\KFHD8Backup]
Now open up the Computer folder, and in the C: drive you will find a folder called "KFHD8Backup" with all of those files that you just pulled in there. Once you're at this stage, you have finished backing up. Take that folder and put it somewhere safe, on a USB drive, or an external flash drive.
If you need to flash these to restore the device in case you have bricked it, boot into fastboot mode. Place the folder and the files in it back to the C: drive before attempting to restore (if you know how to use the cd command, feel free to change the location of the files). Once you're in fastboot, start with the first line of code to command CMD to locate the backups folder, then proceed with the second, one-at-a-time:
Code:
cd C:/KFHD8Backup
fastboot -i 0x1949 flash boot stock-boot.img
fastboot -i 0x1949 flash recovery stock-recovery.img
fastboot -i 0x1949 flash system stock-system.img
fastboot -i 0x1949 reboot
+Note: Be patient, as some of the codes take a while due to the amount of data being transferred between the device and your computer. If nothing happens after you hit Enter on a line of code or it just hangs at nothing, close the command prompt, open it up again, and retry. It might seem scary, but if there are no codes being executed in the command prompt (you'll see data transfers with kB/s and such if there's communication), it's safe to unplug the cable or close the command prompt. Feel free to reboot your computer, then plug the cable in and try again.
Also, know that these files, when flashed through fastboot, will revert your device back to the state of when these backups were made, so once you have TWRP, these files are no longer important. The backups you make in TWRP will be just as useful, and can save you both time and patience. If, however, you want to revert to a completely stock Amazon OS software for warranty purposes, or to redo this process for any reason, they will come into play because these backups retain your apps and your settings. Otherwise, use the KFHD System Restore Tool to go completely stock.
After you have backed-up (optional), and you have the two needed files on the sdcard (TWRP image and freedom-boot image, ignore the Amazon OS and the stack override files), you can move on to step three.
Recap:
1. Go to Hashcode's 2nd-bootloader thread
2. Download both the required files and move them to sdcard
3. Use ADB to make backups (optional)
4. Use fastboot to restore the images you backed up if there are issues
Click to expand...
Click to collapse
German JPL
Thank you for helping me.
I can't transfer the 2 files as I can't access the sdcard, but I did do this initially.
Also, do I use the command prompt just from the desktop and will it work while I'm in fastboot mode as I can only get into fastboot or recovery. I can't boot normally.
I will give it a go anyway, I really am very grateful for your help
Well, I've done it!!
I made sure ADB was properly installed, following the video link German helped with. Had to make my own android-sdk folder on the C:\ drive. Put KFFirstAide100 and KFHD_SRT_v2.1 downloaded from here in the "platform-tools" folder, ran KFHD_SRT_v2.1 tool to get into fastboot (turn Kindle off first, press option 1, then n, then connect kindle to computer via cable. It will go into fastboot.
Then Go to Firstaide in fastboot mode and restore kindle via one of the options on there.
Now I'm up and running again. Yey!!
Thank you German for all your help!!:highfive:
HELP
pixie67 said:
Well, I've done it!!
I made sure ADB was properly installed, following the video link German helped with. Had to make my own android-sdk folder on the C:\ drive. Put KFFirstAide100 and KFHD_SRT_v2.1 downloaded from here in the "platform-tools" folder, ran KFHD_SRT_v2.1 tool to get into fastboot (turn Kindle off first, press option 1, then n, then connect kindle to computer via cable. It will go into fastboot.
Then Go to Firstaide in fastboot mode and restore kindle via one of the options on there.
Now I'm up and running again. Yey!!
Thank you German for all your help!!:highfive:
Click to expand...
Click to collapse
I dont get how you fixed it i am a noob can you please send me everything i need to download and how to do it? I really need to get my kindle back so i can put my cm rom on it please!
OhhRey said:
I dont get how you fixed it i am a noob can you please send me everything i need to download and how to do it? I really need to get my kindle back so i can put my cm rom on it please!
Click to expand...
Click to collapse
This should do the trick(assuming you just want to push a rom onto your device), drivers are always in my signature, adb is in the zip on the tutorial i wrote a while back. Here ya go!
HELP
stunts513 said:
This should do the trick(assuming you just want to push a rom onto your device), drivers are always in my signature, adb is in the zip on the tutorial i wrote a while back. Here ya go!
Click to expand...
Click to collapse
Good news and bad news, i installed the gapps and cm but it is stuck on the cyanogenmod screen and keeps looping. Please help! I thought i was done so close to a new android device! HELP!
OhhRey said:
Good news and bad news, i installed the gapps and cm but it is stuck on the cyanogenmod screen and keeps looping. Please help! I thought i was done so close to a new android device! HELP!
Click to expand...
Click to collapse
Do a factory reset from twrp and see if it fixes the problem.
Was running MMuzzy, tried Omni, decided to go back (no statement on Omni, just didn't want to deal with new, setting up and such) and the only backup I have is in TWRP... but I switched to CM to install Omni... and like an over eager cleaner, I deleted the install files for everything last time I was in Omni... then I went into recovery, wiped and realized I need TWRP to restore my backup (no files found in CW)
All I can do is boot into recovery and I cannot figure out how to set up windows so I can put an install file on there to run so I can get back to TWRP and clean this mess up. I tried installing the Samsung drivers on an XP workstation but the computer doesn't find drivers when plugging in the phone... I pointed to the samsung/drivers folder in programs but no luck.
Bail a ding bat out?
Bump
Can anybody explain how to get this thing viewable in windows? (With no phone control)
Please.... and thank you in advance!!!
I am ready to pay someone for help on this
Help me get this back to life... name a reasonable price
Use efrant's guide in the stickys to flash the factory image and use his link for Windows drivers. It always works and his fastboot tutorial has saved my device more than once.
Link:
http://forum.xda-developers.com/showthread.php?t=1626895
For my instructions, download these, you will end up using them:
1. Android drivers for windows, I would prefer Universal Naked Driver (UND):
http://forum.xda-developers.com/showthread.php?t=1766220
2. Android debugging tools (ADB), I would prefer minimal ADB:
http://forum.xda-developers.com/showthread.php?p=42407269
3. TWRP recovery image: http://www.teamw.in/project/twrp2/90 download the last version you remembered using or just use the latest openrecovery-twrp-2.6.3.2-maguro.img
Install 1 & 2 in order. You may need to have the phone boot to recovery to install #1. Installing the drivers in Windows XP/7 will be easier, Windows 8/8.1 requires an advanced step to disable unknown driver enforcement.
For #2, if you have ADB/Fastboot already, skip this step. If you don't, then you may need to install it while in recovery too. Install it to a folder you are familiar with, I would choose C:\ and make an Android folder.
After you have both installed, boot your phone to bootloader mode. When it is shut off, hold VOL + and - at the same time then press the power button for all 3 simultaneously. It will boot into bootloader mode, where you see the android and your Galaxy Nexus revision/software details.
Move the TWRP recovery img file to the location of your ADB folder. For my example, I will assume #2 (adb tools) are installed in Local Disk (C and the android folder, so C:\Android
From here you would use the command prompt/terminal start > run > cmd or start, find program Command Prompt.
In the terminal type cd\foldertoTWRPimgfile\ or in my example, cd\android\
Next, type fastboot flash recovery openrecovery-twrp-2.6.3.2-maguro.img
my example would look like:
C:\android\ fastboot flash recovery openrecovery-twrp-2.6.3.2-maguro.img
it will show a progress indicator, then OK'd when it is finished.
You can then manually boot to recovery in fastboot, hit a volume button on your phone a few times until you see RECOVERY, then hit the power button to load it. You should now be in TWRP and be able to restore your backup, hope it is still there. Since it is likely that you were last using an older version of TWRP for MMuzzy, you might notice differences if you flash a newer version of TWRP.
kaijura said:
For my instructions, download these, you will end up using them:
1. Android drivers for windows, I would prefer Universal Naked Driver (UND):
http://forum.xda-developers.com/showthread.php?t=1766220
2. Android debugging tools (ADB), I would prefer minimal ADB:
http://forum.xda-developers.com/showthread.php?p=42407269
3. TWRP recovery image: http://www.teamw.in/project/twrp2/90 download the last version you remembered using or just use the latest openrecovery-twrp-2.6.3.2-maguro.img
Install 1 & 2 in order. You may need to have the phone boot to recovery to install #1. Installing the drivers in Windows XP/7 will be easier, Windows 8/8.1 requires an advanced step to disable unknown driver enforcement.
For #2, if you have ADB/Fastboot already, skip this step. If you don't, then you may need to install it while in recovery too. Install it to a folder you are familiar with, I would choose C:\ and make an Android folder.
After you have both installed, boot your phone to bootloader mode. When it is shut off, hold VOL + and - at the same time then press the power button for all 3 simultaneously. It will boot into bootloader mode, where you see the android and your Galaxy Nexus revision/software details.
Move the TWRP recovery img file to the location of your ADB folder. For my example, I will assume #2 (adb tools) are installed in Local Disk (C and the android folder, so C:\Android
From here you would use the command prompt/terminal start > run > cmd or start, find program Command Prompt.
In the terminal type cd\foldertoTWRPimgfile\ or in my example, cd\android\
Next, type fastboot flash recovery openrecovery-twrp-2.6.3.2-maguro.img
my example would look like:
C:\android\ fastboot flash recovery openrecovery-twrp-2.6.3.2-maguro.img
it will show a progress indicator, then OK'd when it is finished.
You can then manually boot to recovery in fastboot, hit a volume button on your phone a few times until you see RECOVERY, then hit the power button to load it. You should now be in TWRP and be able to restore your backup, hope it is still there. Since it is likely that you were last using an older version of TWRP for MMuzzy, you might notice differences if you flash a newer version of TWRP.
Click to expand...
Click to collapse
Wow... I really do not know where to begin to thank you... that REALLY saved my bacon as it is my work phone as well as personal cell too. Please send me a PM with a donation addy and an amount if you have one or I would be happy to send you a Christmas present...
Merry CHRISTmas everyone!!!!
Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol
bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs
Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.
can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!