Related
Classic Sense Kernel
This kernel started out of a request from tommytomatoe to have a stock kernel with sbc optional. So here I present a stock-"ish" kernel for gingerbread. Hopefully this will fill a niche where either the end user who likes the stock kernel, as well as the user who has issues getting custom kernels to run will both have something to flash that gives them that little bit extra without going overboard. There is no overclocking in this kernel, nor undervolting. This is for a stock experience with a few tweaks.
What's in this Stock-"ish" kernel
Stock Kernel 2.6.35.10
Enabled Wireless N
Powersave Governor enabled
Perflock Disabled
HDMI Fix
GPS Fix
3 Point Touch Check
10 Point Touch
Superior Battery Charging (SBC)
Audio Boosted with On/Off Toggle (default setting is on)
Fast USB Charge with On/Off Toggle (default setting is off)
Reduced Wifi Voltage
Front Facing Camera Fix (should work on all gingerbread sense)
CIQ Disabled
Fix for those having issue with hostpot
Enabled EXT4 Support (applied performance patch)
Instructions
Apply with your preferred custom recovery and clear Dalvik Cache/Cache.
For SBC
It seems to help if you wipe Dalvik Cache/Cache.
And make sure the phone is fully booted before plugging it in.
For Audio Boost to turn on and off
Code:
Audio Boost On
echo 1 > /sys/kernel/audio_boost/aboost
Audio Boost Off
echo 0 > /sys/kernel/audio_boost/aboost
Query Audio Boost Status
cat /sys/kernel/audio_boost/aboost
For USB Fast Charge to turn on and off
The below code will toggle it in the terminal, but a cool way to turn it on and off would be to support the original dev who put this mod together, chad0989 by purchasing his widget that controls this version of usb fast charge as well as the patch version. LINK TO WIDGET
Code:
USB Fast Charge On
echo 1 > /sys/kernel/fast_charge/fast_charge_usb
USB Fast Charge Off
echo 0 > /sys/kernel/fast_charge/fast_charge_usb
Query USB Fast Charge Status
cat /sys/kernel/fast_charge/fast_charge_usb
File Descriptions
The Non-SBC Version of the Kernel
classickernelv#.zip
The SBC Version of the Kernel
classickernelv#-sbc.zip
Credits
I am grateful to all, from the developers, to the end users who
provide the feedback and use what is created.
More specifically (in alphabetical order) I would like to credit
the following developers for their work.
barnacles10
cayniarb
chad0989
detcup4evr
drellisdee
faux123
lithid
ms79723
netarchy
paulmck
TeamWin
tiny4579
toastcfh
ziggy471
Also I would like to thank 2 alpha testers who kept me going
swagstr
tommytomatoe
Also I would like to thank the tester for the ffc fix
buckhunter (test all 4 options I wanted to check)
sclarktay4
Disclaimer
As with all things, not every variant can be accounted for. Please use at your own risk. I am not responsible for any damages/bricks/etc that may accompany use of this kernel.
Bug Reporting
Post a reply in this thread or pm me, and I will do my best to assist and/or correct bugs.
Update History
v1.5
Enabled EXT4 Support (applied performance patch)
v1.4
Changed Audio boost to on/off toggle
USB Fast Charge and on/off toggle
v1.3
CIQ Disabled
Fix for Hotspot for some users
v1.2
Front Facing Camera Fix
Compiler Optimizations
v1.1
Boosted Audio More
Reduced Wifi Voltage
v1.0 - Initial Release.
Stock Kernel 2.6.35.10
Enabled Wireless N
Powersave Governor enabled
Perflock Disabled
HDMI Fix
GPS Fix
3 Point Touch Check
10 Point Touch
Superior Battery Charging (SBC)
Links
classickernelv15.zip
md5: c522f5d213069899528e3c5147e6271a
classickernelv15-sbc.zip
md5: 2de0f7b3c3df360a8f427266a27bdbde
Old Links
classickernelv14.zip
md5: 0d2ea9654c5ab89ab03f8bfc5a8a5f73
classickernelv14-sbc.zip
md5: 7a2358e5403328ae71197264cb51ce31
classickernelv13.zip
md5: 64613e676fa14e39680ddd5fb5eaa2fb
classickernelv13-sbc.zip
md5: 854ab7405da435de27d59b791d9f73e7
classickernelv12.zip
md5: 89fbe977334cbc01696cd5a799116b47
classickernelv12-sbc.zip
md5: 26b9fe8d017a900a8ea178a674ecff8f
classickernelv11.zip
md5: 34a152540ff4816f564d304dbf5570dc
classickernelv11-sbc.zip
md5: eb2ebfb127e8de3dfeff44e2fe75b89f
classickernelv1.zip
md5: 100206d020655c3b57b6c0e325efae6c
classickernelv1-sbc.zip
md5: c9358099b966c2b9ea330a52ebb082e9
Github
reserved.
random commentary
My fiirst time posting a kernel or anything of this type, please let me know if i messed up the updaterscript, (spelling errors, upload doesnt match my md5, etc)... thank to all who tested.
I am first. Thank you for bringing sense gingerbread sbc kernel.
Sent from my lair.
Is this different from the one in your Saturday morning thread?
Sent from my PC36100 using xda premium
chupafaros said:
Is this different from the one in your Saturday morning thread?
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
yes, this is different than the saturday morning post... that one in the post was an early version of what will be a custom kernel I will be posting later in the week..
Good job
Sent from my PC36100 using XDA
Nice flashing the sbc now. Thanks
Sent from my PC36100 using xda premium
Test kernal ran great can't wait to check this out
Sent from my PC36100 using Tapatalk
would u suggest this sbc kernel over the Saturday morning one?
Sent from my PC36100 using xda premium
chupafaros said:
would u suggest this sbc kernel over the Saturday morning one?
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
the test kernel is an early version of a custom kernel i am working on, this kernel is stock governor, scheduler, etc.. so its up to you, the sbc should be the same either way... the test kernel had smartassv2 as the default governor and this one doesn't have anything that's not in the original kernel...
also if you guys can do me a favor
just let me know if everything works out right, tried to compile both kernels, get the post up all tonight, so I am hopeful I didn't screw anything up lol
finally! haha the wait for this kernel was unbearable haha. nice work, flashing first thing in the morning
+1 I really liked the test version of this can't wait to try this one I will let u know how it goes thanks bud .
sent from my swagged out ics and kicking it in the underworld using xda premium.
Thanks.
I'm happy to see an sbc kernel finally for gb.
Sent from my PG86100 using Tapatalk
I'll try to get out the synergy type zips out tomorrow... i know godmode and nightlies flash differently, so I just need to see how det4cpu and/or lithid did it, and I'll set them up... well i hope all goes well guys..thanks for trying it out...gotta get up in 4 hours to get to work...night.
This is the first kernel I've flashed -always been satisfied with stock. UNTIL I read all the recommendations for this one. So I figured now's as good a time as any to give it a whirl! Very eager to see how thingsvturn out. Thanks for your hard work!
Sent from my Classic EVO using Tapatalk
Nice job man.....always wanted to do a little kernel deving.....very impressive.
Sent from my PC36100 using XDA
After reading this I'm unsure which one I just installed...lol. I downloaded the one that someone posted or linked to on Tommy's Classic thread.
EDIT: After flashing this on both my wife's phone and my own, I noticed my location changed to a city that's 45 minutes to an hour away. This happened a long time previously and it drove me nuts. Any idea what could cause this?
Sent from my PC36100 using xda premium
The test version caused reboots. Hopefully this one won't.
Thanks!
Sent from my PC36100 using xda premium
will this work for the latest 4.67 or is this for 4.54?
KoKoMaster said:
will this work for the latest 4.67 or is this for 4.54?
Click to expand...
Click to collapse
yeah it'll work dude
Hi
This ROM is CM10 compiled from aremcee work. Device repo and Kernel repo
It include my overclock kernel and some more modification.
Settings i use in CM10:
Settings-Wi-Fi-Advanced-Keep Wi-Fi on during sleep
Only when plugged in
Settings-Performance-Memory management
zRam=disable
allow purging of assets=checked
Kernel samepage merging=uncheck
Settings-Location services
Location & Google search=uncheck (but you need it for Google now)
Settings-Developer options
Force GPU rendering=uncheck (check for hi score benchmark only)
Settings-Display-automatic backlight
Enabled=checked
Sample interval=5s
View attachment 1185940
Gapps for CM10
More in detail:
V1
Update to last CyanogenMod change.
Add tdmcode - Fix crash when bringing up cpu1 from userspace
Add Nova Launcher app.
Add AwesomeBEATSv3 in this rom.
Add Alloy White theme.
Add SuperCharger V6 to the rom
You can overclock to 1728mhz and change voltage too.
Use System Tuner app to change CPU freq. and Voltage in real time.
The Gpu is overclock from 266mhz to 300mhz for 3d and from 200mhz to 229mhz for 2d.
You can change GPU freq. from system/init.d/99GPUoverclock file.
Click to expand...
Click to collapse
Initial release
Click to expand...
Click to collapse
Enjoy!
P930
cm-10-20130217-HyperSonic-V1.1-p930.zip
SU640
cm-10-20130217-HyperSonic-V1.1-su640.zip
HO!NO! said:
This rom is really at is debut for testing only
Need some tester for overclock, undervolting and governor effect on the rest of the rom.
many thing will be add when it will be more stable.
happy testing!!
HO!NO!_cm-10-20121215-UNOFFICIAL-p930.zip
Click to expand...
Click to collapse
Thanks! Going to test it, and is there any details about this rom?
Again, TY HO!NO!
Downloading right now and I'll flash it and give it a run and report back.
Installed but I cannot receive calls. I did once but I am not sure what I was configuring at that time so please help me with that issue, phone number is "Unknown" in about phone.. Other than that it is smooth and quick.
Maybe try flashing a baseband again .
Sent from my LG-P930 using xda premium
Makoers said:
Maybe try flashing a baseband again .
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Looks good. Seems to be working with my trial calls. Thanks.
HO!NO! said:
This rom is really at is debut for testing only
Need some tester for overclock, undervolting and governor effect on the rest of the rom.
many thing will be add when it will be more stable.
happy testing!!
HO!NO!_cm-10-20121215-UNOFFICIAL-p930.zip
Click to expand...
Click to collapse
I volunteer to be a guinea pig for the oc/uv lol. I'm just now getting to flashing. Thank you HO!NO! and good to see you're still coming around!
HO!NO!
Does this Alpha ROM include your OC/UV kernel b/c I'm not seeing the 99ocvoltcontrol or 99GPUoverclock files. As well, the init.qcom.post_boot.sh doesn't have the options to set governer and OC. Is that something you're waiting to release due to on going issues?
He's waiting for people to volunteer for the oc/uc. This is just alpha release with no kernel tweaks. (This is my assumption with information he has provided in the op)
Sent from my LG-P930 using xda premium
cashy57 said:
He's waiting for people to volunteer for the oc/uc. This is just alpha release with no kernel tweaks. (This is my assumption with information he has provided in the op)
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
In that case, I raise my hand to test.
Sent from my LG-P930 using xda premium
Shows OC values
cashy57 said:
He's waiting for people to volunteer for the oc/uc. This is just alpha release with no kernel tweaks. (This is my assumption with information he has provided in the op)
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
I've just installed this build and indeed I am seeing OC values of 1566, 1620, 1674, 1728, 1782, 1836, 1890, 1944
I have not messed with the voltages at all yet however, but I assume they would be there too.
ROM runs smooth and fast but already had two bsod
Sent from my LG-P930 using xda premium
With system tuner i was able to overclock and undervolt without problem and they stick after reboot.
Sent from my LG-P930 using xda premium
OMG. Man, i waited so long for this, I moved to the S3. Still gonna drop by here though, check up on this. It's a HO!NO! work, it's bound to be sick, amirite?
GREAT!, After nitro hd version stabilized and u got spare time, wish to hv a su640 version :]
HO! NO! You are awesome. I am willing to be a kernel guinea pig as well.
Screenshots?
Sent from my DROIDX using xda app-developers app
my experience so far
I flashed it last night and used pimpmyrom to tweak a few settings (no change on dalvik and multitasking). 1728 seems unstable to me. But I read that this ROM has no uv so I might give that a try.
What values should I decrease for uv?
kenship said:
I flashed it last night and used pimpmyrom to tweak a few settings (no change on dalvik and multitasking). 1728 seems unstable to me. But I read that this ROM has no uv so I might give that a try.
What values should I decrease for uv?
Click to expand...
Click to collapse
I used X0dus' numbers from his FT undervolt guide in the general section and I'm running stable at 1728. I don't have PmR or anything else running on it at the moment. This ROM does, in fact, have uv; as HO!NO! said, use System Tuner to set the values.
rom run very smooth with the new kernel, but the taskkiller is too aggressive , keep killing the browser , battery drain is better but still not sleeping well Thank you!please keep it up!
I have looked through the forum, and even on CM's forum, but did not find the answer I was looking for, so I ask, if thats okay.
I am Using the newest stable CM 10.1, and I would like to replace the kernel that allows overclocking. I have seen Francos Kernel, but I do not know how well it likes the New CM10.1.
Any suggestions maybe?
Thanks
fancy kernel maybe?
sent from my sexy Nexy
Well almost every kernel is fine. AK, franco, fancy, lean...
Sent from my Galaxy Nexus using xda premium
Thanks Everyone.
I went ahead, and made a Nandroid backup, flashed the kernel using fastboot.
Works so far.
Only things I have seem to lost are the colour hacks, and the GPU speed setting. Hmm...
DarX7 said:
Thanks Everyone.
I went ahead, and made a Nandroid backup, flashed the kernel using fastboot.
Works so far.
Only things I have seem to lost are the colour hacks, and the GPU speed setting. Hmm...
Click to expand...
Click to collapse
Glados can go to a 2.0 GHz! Most phones cant go that high but you can try if you want
Sent from my Galaxy Nexus using XDA Premium HD app
Nvm. Got everything working. CPU/GPU speed control. Also Voltage/Colour control VIA Trickster mod.
Thanks for suggesting Fancy Kernel
Hi guys, I've been working on a kernel for fun, so I thought I'd share it. The cm10.1 version is based off cm-10.1 branch of team hydra's source. I'm working on a cm10.2 version based off cyanogenmod's cm-10.2 branch. I can't tell you what rom it'll work with, since I mainly use cm10.1, but I'm fairly sure it'll work without problems on other AOSP roms.
Features:
OC/UV to 1600mhz
650ma charging over usb (Yes, it acutally charges when plugged into a computer while in use now..)
UKSM
Always tracking the latest version of Linux 3.0.y
Optimized SHA routines
Dynamic fsync enabled
mmc tweaks
use gnu version of lib/string and memcopy for better performance
Proportional Rate Reduction for TCP
lzo compressed with updated implementation
zram enabled with snappy compression by google
many other low level tweaks cherry-picked from popular kernels for other devices
Source: https://github.com/blasphemy/android_kernel_samsung_smdk4412
Downloads (4.2):
blasphemy kernel v1: http://f.the-beach.co/stuff/kernal/blasphemykernel-1.zip
blasphemy kernel v2: http://f.the-beach.co/stuff/kernal/blasphemykernel-2.zip
blasphemy kernel v3: http://f.the-beach.co/stuff/kernal/blasphemykernel-3-4.2.zip warning: potentially unstable. YMMV.
blasphemy kernel v4: http://f.the-beach.co/stuff/kernal/blasphemykernel-4-FINAL-4.2.zip
blasphemy kernel v5 http://f.the-beach.co/stuff/kernal/blasphemykernel-5-final.zip
blasphemy kernel v6: http://f.the-beach.co/stuff/kernal/blasphemykernel-6-final-4.2.zip
blasphemy kernel v6.1: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.1-4.2.zip
blasphemy kernel v6.2: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.2-4.2.zip
Downloads (4.3)
blasphemy kernel v2: http://f.the-beach.co/stuff/kernal/blasphemykernel-2-4.3.zip
blasphemy kernel v4: http://f.the-beach.co/stuff/kernal/blasphemykernel-4-FINAL-4.3.zip
blasphemy kernel v6.1 http://f.the-beach.co/stuff/kernal/blasphemykernel-6.1-4.3.zip
blasphemy kernel v6.2: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.2-4.3.zip
blasphemy kernel v.6.6: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.6-4.3.zip
md5sums (By order of release):
162a62fa52a3aaf3d3e5018b4ac2af6a blasphemykernel-1.zip
c560665c5408ad305ccaaf4ffe621f07 blasphemykernel-2.zip
36f568d46214d6d8e44620b761f0e038 blasphemykernel-2-4.3.zip
a758fbf78d6c6cdf267318f8a008208b blasphemykernel-3-4.2.zip
dc21fd3c8545c3e36ef5925f22ea5f3b blasphemykernel-4-FINAL-4.2.zip
2ae5873464db5d2b42c44c2205798a1f blasphemykernel-4-FINAL-4.3.zip
ab40287ebaea03306e9d27b7f1759ea5 blasphemykernel-5-final.zip
aa141b636f9363db980f4acef47402a0 blasphemykernel-6-final-4.2.zip
e99e83f8ffe0919127a058a1032fc8d7 blasphemykernel-6.1-4.3.zip
f0989b2185377487747f9be4392486d3 blasphemykernel-6.1-4.2.zip
ab3aea0b1997092762ccc1f7a996c0f1 blasphemykernel-6.2-4.2.zip
b8e6f32037c23aebe907abf4d72efae0 blasphemykernel-6.2-4.3.zip
b952c712d8d7ef750947632b9fe48b55 blasphemykernel-6.6-4.3.zip
Roadmap:
Add JIT packet filter
Add BFS
Add a slew of governers/io schedulers
Zxo0oxz said:
Hi guys, I've been working on a kernel for fun, so I thought I'd share it. The cm10.1 version is based off cm-10.1 branch of team hydra's source. I'm working on a cm10.2 version based off cyanogenmod's cm-10.2 branch. I can't tell you what rom it'll work with, since I mainly use cm10.1, but I'm fairly sure it'll work without problems on other AOSP roms.
Features:
OC/UV to 1600mhz
650ma charging over usb (Yes, it acutally charges when plugged into a computer while in use now..)
UKSM
Always tracking the latest version of Linux 3.0.y
Optimized SHA routines
Dynamic sync control enabled
mmc tweaks
use gnu version of lib/string and memcopy for better performance
many other low level tweaks cherry-picked from popular kernels for other devices
Source: https://github.com/blasphemy/android_kernel_samsung_smdk4412
Downloads:
blasphemy kernel v1: http://f.the-beach.co/stuff/kernal/blasphemykernel-1.zip
Click to expand...
Click to collapse
so how should we install this....
comptonhubbard said:
so how should we install this....
Click to expand...
Click to collapse
Same way you flash a ROM..
Sent from my SPH-D710 using Tapatalk 4
comptonhubbard said:
so how should we install this....
Click to expand...
Click to collapse
Just flash the zip. No further work needed, it clears the cache and everything for you.
Zxo0oxz said:
Just flash the zip. No further work needed, it clears the cache and everything for you.
Click to expand...
Click to collapse
I did that and I oc to 1400 and set I/0 to sio and governor to peq - --is there a default setting for this.
comptonhubbard said:
I did that and I oc to 1400 and set I/0 to sio and governor to peq - --is there a default setting for this.
Click to expand...
Click to collapse
Use whatever tweak app you like, I know Cyanogenmod has an option to set those options on boot.
NICE LIKE TO SEE WE ARE GETTING MORE KERNELS!! THANKS
Sent from my LG-LS970 using Tapatalk 4
Well done!
Sent from my SPH-D710
So I take it this will not boot on our cm10.2 or any 4.3 ROM right now correct?
Sent from my SCH-R760 using XDA Premium 4 mobile app
ps3hacker3 said:
So I take it this will not boot on our cm10.2 or any 4.3 ROM right now correct?
Sent from my SCH-R760 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm not really sure. If it doesn't work, I can roll out a version rebased from 10.2 source within a few hours
Seems to be running nicely so far. Oc to 1400 with -50 under volt across the board. Has anyone had any success with lower uv than that? I'm too tired for
Trial and error.
Sent from my SPH-D710 using XDA Premium 4 mobile app
Would you mind updating the OP with an md5?
Sent from my SPH-D710
MustWarnothers said:
Seems to be running nicely so far. Oc to 1400 with -50 under volt across the board. Has anyone had any success with lower uv than that? I'm too tired for
Trial and error.
Sent from my SPH-D710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The OC/UV is the same used on agat63's kernel and LZ, so you can expect similar results.
Sweet! trying this out now. ^.^
abadasstanker69 said:
Would you mind updating the OP with an md5?
Sent from my SPH-D710
Click to expand...
Click to collapse
Done.
Ok...just tested this for a few minutes. Instantly rebooted after flashing....which I really wan't expecting. Thought maybe I had bricked my phone for a sec since I don't have USB access to my phone BUT nope! Booted right up. Played with the gov's...all worked well. 1600 worked just fine. Had to rebuild my scripts for link2sd for ext4 which I expected. Then the bad news......GPS is totally whacked out. Didn't work at all. I used both of my gps apps and not a single sat was found. Other than that it was great! Had to switch back to stock CM till the GPS is fixed because I'm new to Az and don't know my way around yet. Thanks for the work though!
I'll be checking this out, I'm working on building pure vanilla jellybean 4.2.2 so I'll give this a try once the source finishes syncing and I compile it.
Sent from my SPH-D710 using XDA Premium 4 mobile app
abadasstanker69 said:
Ok...just tested this for a few minutes. Instantly rebooted after flashing....which I really wan't expecting. Thought maybe I had bricked my phone for a sec since I don't have USB access to my phone BUT nope! Booted right up. Played with the gov's...all worked well. 1600 worked just fine. Had to rebuild my scripts for link2sd for ext4 which I expected. Then the bad news......GPS is totally whacked out. Didn't work at all. I used both of my gps apps and not a single sat was found. Other than that it was great! Had to switch back to stock CM till the GPS is fixed because I'm new to Az and don't know my way around yet. Thanks for the work though!
Click to expand...
Click to collapse
I'll look into the GPS issue when I get off work, because I never use it. As far as the reboot, sorry about that, I'll remove it from the next build.
Next order of business: messing with governors isn't really my thing, but are there any that you guys would really like to have in a kernel? IO schedulers as well?
Zxo0oxz said:
I'll look into the GPS issue when I get off work, because I never use it. As far as the reboot, sorry about that, I'll remove it from the next build.
Next order of business: messing with governors isn't really my thing, but are there any that you guys would really like to have in a kernel? IO schedulers as well?
Click to expand...
Click to collapse
PQ has always been my favorite. I think everything else is awesome. Just went back to Dastin's stock cm kernel and GPS came back. Also, the reboot isn't such a huge deal. I just wasn't expecting it is all. Overall it looks great man
Sent from my SPH-D710 using xda app-developers app
Zxo0oxz said:
I'll look into the GPS issue when I get off work, because I never use it. As far as the reboot, sorry about that, I'll remove it from the next build.
Next order of business: messing with governors isn't really my thing, but are there any that you guys would really like to have in a kernel? IO schedulers as well?
Click to expand...
Click to collapse
I have no issues with GPS, got a lock fairly quickly!
It seems like the best roms now are all CM based, but I miss a couple features from my TW based roms. Mainly I miss KTweaker and being able to overclock my phone, then I really wish I could hold the back key to kill apps. Is there anything like that for CM based roms?
Back to kill is in developer options at the very bottom. Developer options must be enabled by pressing build number 7 times until it is enabled. Overclocking is kernel based and I believe Leankernel and BMS both support this.
Sent from my SPH-L710 using xda app-developers app
I don't see back to kill in developer options. I'm still looking though. Can i change my kernel even after installing a rom?
dreigle said:
I don't see back to kill in developer options. I'm still looking though. Can i change my kernel even after installing a rom?
Click to expand...
Click to collapse
Yes, there are several kernels you can install, including ktoonzes which includes ktweaker...if you choose BMS, dkp, or lean kernel you can download apps to oc and etc.
Sent from my SPH-L710 using Tapatalk
tlrsax54 said:
Yes, there are several kernels you can install, including ktoonzes which includes ktweaker...if you choose BMS, dkp, or lean kernel you can download apps to oc and etc.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Ok the only roms i ever tried that allowed you to pick a kernel were TW based so i didn't know if ktoonzes was only for TW or if anyone could use them. I'm using IllusionRom 2.6 (which is running quite smoothly. Just need to change all the blue icons in the status bar to red lol)
I've tried ktoonzes and leankernel but after flashing both my screen looks all crazy, zoomed in like 1000% and the colors are way off. Idk what i'm doing wrong. Am i not supposed to use the AOSP version with CM?
dreigle said:
Ok the only roms i ever tried that allowed you to pick a kernel were TW based so i didn't know if ktoonzes was only for TW or if anyone could use them. I'm using IllusionRom 2.6 (which is running quite smoothly. Just need to change all the blue icons in the status bar to red lol)
I've tried ktoonzes and leankernel but after flashing both my screen looks all crazy, zoomed in like 1000% and the colors are way off. Idk what i'm doing wrong. Am i not supposed to use the AOSP version with CM?
Click to expand...
Click to collapse
You have to choose a kernel build from the appropriate date range; the weird color issue was a CM bug from around October 20th if I remember, and it was fixed in the next round of kernel releases. Plus, Illusion doesn't get updated all that often, so you probably need a kernel build, date-wise, that is as close as possible to the build date of your version of Illusion.
I just switched roms to pure bean
Can I use ktoonzes with that?
dreigle said:
Can I use ktoonzes with that?
Click to expand...
Click to collapse
Yes here's the link:
http://forum.xda-developers.com/showthread.php?t=1800576