Develop Bugs

[MOD] T-Mobile Note 2 wireless charging mod

This is a fork of the original N7100 Note 2 wireless mod thread found here:
http://forum.xda-developers.com/showthread.php?t=1951493
The purpose of this thread is to determine why the wireless charging pins on the T-Mobile Galaxy Note 2 (SGH-T889) are not working after installing the MOD above.
Please view the thread above for more details about the original MOD, and to see what you need to do first in order to continue with the work around below.
Updated method on 8-5-2013: Thanks to SGBE
The updated method has a better solder point. See that thread OVER HERE.
Results:
The Work Around: (verified working on multiple devices)
We have a mod to make wifi charging work! Regardless if the T-Mobile GN2 is missing hardware or not, the work-around is a low cost (free?) alternative to get wifi charging working. Our work around involves soldering a small wire to a tiny point on the micro usb board. You should be able to solder a very small connection (about the size of a pen tip) before attempting this.​The mod/workaround below is verified working with the stock charger and stock kernel. <- Pay attention to that last bit.
Workaround Known Issues:
Some kernels have a charge rate which is set too high for the PALM PRE Touchstone to work with. Likewise, some non-oem chargers can not deliver enough amperage to continuously charge the device wirelessly through the Touchstone. Therefore, if you have any problems (disconnect/reconnect proble), be certain that you are using a stock charging rate (kernel controlled) and a stock Galaxy Note 2 Charger (2,000mA). If you are still having problems check your mod for trouble, and finally post up and maybe someone can help you.
The Mod / Workaround:
(also attachment #3 on the list below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The full work around post is on page 3.​
New Information:
If you have new information on a hardware or software fix then it will be added here. Until that time, proceed with the workaround at your own risk. Once again, the work around instructional image is HERE.
WARNING: What was claimed to be a fix in the section below did not work, and ultimately people wasted money on bogus hardware. It is here for historical reference.
The Fix
You may need to purchase some missing hardware.
See page 7 for details (you need to replace the flex cable and micro-usb board): http://forum.xda-developers.com/showpost.php?p=34380437&postcount=65 The SKU number for the board is MBRPSS964.
(the false wifi charging image is only attached for historical reference)
Picture legend:
Sprint GN2 chip (the chip is missing on T-Mobile's version)
Sprint GN2 pin pads
Wifi Charging work around instructions
Completed work around example.
alternate view of work around charging pin
alternate view of work around +5vdc source
Picture of the wi-fi fix working (reported that this may be a fake!)
Older info:
Some steps that I've personally done:
Completed the wireless mod above, confirmed wireless voltage reading of 5.56vdc.
Tested continuity between USB positive, and wireless positive - no connection.
Tested continuity from the negative wireless charging pin to the negative USB, SIM slot, various screws - they are connected.
Jumped the positive post on the USB to the wireless charging positive pin, the phone charges but is not practical to have a wire hanging out of the USB port.
I plan to pull apart the phone and check the paths from the positive and negative ports on the wireless pins. Attached is a picture from a SPRINT GN2 that does not have the pins, but supposedly works for charging once contact is made with the pads. I'm going to be using this to compare the circuit against my T-mobile version.

I hope you find something with this in the next few days when the full dis-assembly takes place

vinas1 said:
Tested continuity between USB positive, and wireless positive - no connection..
Click to expand...
Click to collapse
Now this makes sense. Because if both wireless and usb charging connections were directly connected together, the phone would have no way of knowing which charging system you were using. But we know from the tests on the international version that it does know. So this in no way tells us that positive is not connected at all.
Even though the phone doesn't detect wireless charging at this time in software, has anyone tried leaving it on the wireless charger to see if it still charges the battery?

xamindar said:
Even though the phone doesn't detect wireless charging at this time in software, has anyone tried leaving it on the wireless charger to see if it still charges the battery?
Click to expand...
Click to collapse
I did this too, and waited for a while (waiting for the battery to drain on this phone is like trying to suck the ocean dry) - after a long time of playing video it dropped by 1% while on the wireless charger.

vinas1 said:
I did this too, and waited for a while (waiting for the battery to drain on this phone is like trying to suck the ocean dry) - after a long time of playing video it dropped by 1% while on the wireless charger.
Click to expand...
Click to collapse
So wait....does the T-Mobile version of the Note 2 actually charge on the wireless charger? or does it NOT charge?

elite-fusion said:
So wait....does the T-Mobile version of the Note 2 actually charge on the wireless charger? or does it NOT charge?
Click to expand...
Click to collapse
It does NOT charge...
Sent from my SGH-T889 using Tapatalk 2

farfromovin said:
It does NOT charge...
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Got it. Well I hope the OP can figure something out Would be great feature to have the T-Mobile have it.

elite-fusion said:
Got it. Well I hope the OP can figure something out Would be great feature to have the T-Mobile have it.
Click to expand...
Click to collapse
Yeah, I dont see any options other than soldering to the micro usb. It wont register as "wireless charging", but it'll work.
Sent from my SGH-T889 using Tapatalk 2

Well that would be the last resort of course, but I hope that some dev or vinas1 can figure something out at least, this is one of the best features in my opinion

Subscibing... Stupidly ordered a wireless charging kit for the 7100 ASSuming that it would work for the tmob gn2, then noticed this thread ... DOH

Turbo4V said:
Subscibing... Stupidly ordered a wireless charging kit for the 7100 ASSuming that it would work for the tmob gn2, then noticed this thread ... DOH
Click to expand...
Click to collapse
You and me both. I guess I should have known better from the past. At least the parts on amazon are rather cheap.

Turbo4V said:
Subscibing... Stupidly ordered a wireless charging kit for the 7100 ASSuming that it would work for the tmob gn2, then noticed this thread ... DOH
Click to expand...
Click to collapse
Sounds like a lot of us did the same thing. Knowing that, any folks who can test with their modded or kit wireless will help speed up the research for everyone! I'm hopeful at this point, but have not had a chance yet to do a tear down. Been working late hours this week but I should have a chance to disassemble the Gn2 this weekend for sure. So far the plan is to do a visual inspection of the wireless charging circuit and compare it to the sprint pictures in the OP. I'm guessing that a bypass is in order and it may be as simple as using some foil tape or conductive marker; but that's all speculation at this point. :good:

KittyFae said:
You and me both. I guess I should have known better from the past. At least the parts on amazon are rather cheap.
Click to expand...
Click to collapse
+1
i ordered note 2 and wireless charging items (from amazon) the same time. I should've read it in detail. sighhhhhhhhh , cheaper to buy international note 2 also sighhhhhhhhh

seems like it may be hardware related, if you look to the left of the pins, there is something attached on the sprint board that is missing on ours i will circle it in the picture

perryh1 said:
seems like it may be hardware related, if you look to the left of the pins, there is something attached on the sprint board that is missing on ours i will circle it in the picture
Click to expand...
Click to collapse
The pic is T mobile G2 right? Are you still going to try and see it will charge or not?

perryh1 said:
seems like it may be hardware related, if you look to the left of the pins, there is something attached on the sprint board that is missing on ours i will circle it in the picture
Click to expand...
Click to collapse
I don't doubt your info, but it seems weird to me that other carriers (sprint specifically I think) can't access their pins, but would have added hardware that would make the phone capable of wireless charging, and we have access to the pins, but lack the hardware capability to take advantage of them.

perryh1 said:
seems like it may be hardware related, if you look to the left of the pins, there is something attached on the sprint board that is missing on ours i will circle it in the picture
Click to expand...
Click to collapse
I agree. I got a chance to take some macro shot of this with my DSLR. Pics attached.

I have a wind mobile note 2. Identical to the tmobile version. I did poke around with my multi meter and couldnt find the positive charging pin connected to anything. Just to be clear im no expert I just took my phone apart so it may help others figure this out. Especially since I already ordered the palm touch stone stuff lol
Sent from my SGH-T889V using xda premium

As it stands now, I jumped the USB 5vdc internally with a tiny wire, over to the wireless positive pin. It's working, although it was a tough mod. But it is totally internal so I guess this will have to do for now. So I have wireless charging (kind of, it works teh same as USB) on the T-mobile Note 2 now. If anyone wants to do the same thing, post up a pic of the board by the USB plug and I'll label the connector that you can use for the 5vdc source. The reason it's a tough mod is because you have to solder a small connection to the board under the capacitive touch buttons. It took me about 4 hours to find a good power lead on the board and make it all work internally!

vinas1 said:
As it stands now, I jumped the USB 5vdc internally with a tiny wire, over to the wireless positive pin. It's working, although it was a tough mod. But it is totally internal so I guess this will have to do for now. So I have wireless charging (kind of, it works teh same as USB) on the T-mobile Note 2 now. If anyone wants to do the same thing, post up a pic of the board by the USB plug and I'll label the connector that you can use for the 5vdc source. The reason it's a tough mod is because you have to solder a small connection to the board under the capacitive touch buttons. It took me about 4 hours to find a good power lead on the board and make it all work internally!
Click to expand...
Click to collapse
Please do. I might do the same thing... I have lots of touchstones and a couple Note2's that need some inductive lovin'!
Sent from my SGH-T889 using Tapatalk 2

Qi Inductive Wireless Charging Patch from FASTTECH

Has anyone tried one of these on a Verizon GS3? "photo is of the note 2 model but GS3 unit looks identical"
I purchased one from Fasttech.com and installed it today
The phone says charging when I put it on the Qi charging pad. But after about 5 seconds it drops and stops charging...
I am not sure if they sent me a bad charging patch or what the issue might be.
Contacted them already for a replacement, any input would be helpful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

docfong said:
Has anyone tried one of these on a Verizon GS3? "photo is of the note 2 model but GS3 unit looks identical"
I purchased one from Fasttech.com and installed it today
The phone says charging when I put it on the Qi charging pad. But after about 5 seconds it drops and stops charging...
I am not sure if they sent me a bad charging patch or what the issue might be.
Contacted them already for a replacement, any input would be helpful.
Click to expand...
Click to collapse
Are you using a case? I bought the "receiver" from them as well. It works great with my panasonic chargepad if I have a normal TPU case or no case at all. In my Urban Armor case it flips out and stops charging every 5 seconds. Time to go shopping for a new case, I guess. After having the Nexus4, I'm addicted to the convenience of Qi charging.

Yeah I tried OEM plastic door as well as no case at all.
It notifies me of charging starting then drops after about 5 seconds
I suspect it is probably a bad unit. I am using it with Nokia Fatboy chargers

Are you sure you are putting it on exactly where you need to on the charging pad? I'm using the same receiver in my phone with a cruzerlite TPU case and i have no problems at all with it.

docfong said:
Has anyone tried one of these on a Verizon GS3? "photo is of the note 2 model but GS3 unit looks identical"
I purchased one from Fasttech.com and installed it today
The phone says charging when I put it on the Qi charging pad. But after about 5 seconds it drops and stops charging...
I am not sure if they sent me a bad charging patch or what the issue might be.
Contacted them already for a replacement, any input would be helpful.
Click to expand...
Click to collapse
I assume this is the one you purchased?
I'm using it with the Nokia Charging plate.
I have no issues to date. Using Dyztronic TPU case. Saw a review on the Fasttech site:
"I recently picked up a nokia wireless plate for another cell phone I have in my house so I wanted to add wireless charging capabilities to my verizon galaxy s3. I picked up a new back cover on ebay but it made the phone thicker, so I wanted something that would not change the rhickness of the phone. I saw this item and tried it out. It works excellent with the nokia fatboy. It does not make the phobe any thicker and it charges quickly with no issues. Extremely easy to install. Very pleased"
Maybe your plate or charger are defective? Works on my TMO D2, and this guy claims it's good on the VZW model. Best of luck.

if you checked his picture, he got the green one.. which is really weird... I have the yijieneng receiver and it's still working strong for me.
This might be a little crazy.. if you have some copper tape/wire lying around at home, maybe try to route it from the pad to the port and just put the pad right on the transmitter to see if it's just a distance issue or is it a defective receiver.
Mine works w/ the ballistic SG case.

Does this block nfc?

MisterTedster said:
Does this block nfc?
Click to expand...
Click to collapse
no
---------- Post added at 12:39 AM ---------- Previous post was at 12:36 AM ----------
mputtr said:
if you checked his picture, he got the green one.. which is really weird... I have the yijieneng receiver and it's still working strong for me.
This might be a little crazy.. if you have some copper tape/wire lying around at home, maybe try to route it from the pad to the port and just put the pad right on the transmitter to see if it's just a distance issue or is it a defective receiver.
Mine works w/ the ballistic SG case.
Click to expand...
Click to collapse
I think he just used that pic as a reference. It's definitely different either way, diff coil and states 650 instead of 700. Good idea with the tape. Radio shack sells it.

techboydino said:
I assume this is the one you purchased?
Hmm... thats weird the one I got from Fasttech is only 650Mah instead of 700. Mine works fine though. I bought the one where it came with the receiver patch and charging pad. Was extremely cheap, but this thing only charge at 466Ma. Is there anyway to increase the charging capability?
Click to expand...
Click to collapse

My wife and i both are using them from FastTech and no problems.... Charging pad from fasttech as well.... i am on the defender case with my wife using the commuter. mine can be picky with placement on the pad, but hers works no problem...

Blaisun said:
My wife and i both are using them from FastTech and no problems.... Charging pad from fasttech as well.... i am on the defender case with my wife using the commuter. mine can be picky with placement on the pad, but hers works no problem...
Click to expand...
Click to collapse
I just bought a Nokia DT-900 charger and it's not working at all. My receiver is one of the 650ma ones and i get the rapid blinking light on the charger which the manual so vaguely says is a "charging problem'... ORLY?!
Either way I have submitted a request for a replacement receiver. Does anyone know if a higher quality receiver exists? I just want it to work! Those of you who have had no issues... do you have the one rated at 700ma or 650ma? And which charger(s) have you used?

techboydino said:
I assume this is the one you purchased?
I'm using it with the Nokia Charging plate.
I have no issues to date. Using Dyztronic TPU case. Saw a review on the Fasttech site:
"I recently picked up a nokia wireless plate for another cell phone I have in my house so I wanted to add wireless charging capabilities to my verizon galaxy s3. I picked up a new back cover on ebay but it made the phone thicker, so I wanted something that would not change the rhickness of the phone. I saw this item and tried it out. It works excellent with the nokia fatboy. It does not make the phobe any thicker and it charges quickly with no issues. Extremely easy to install. Very pleased"
Maybe your plate or charger are defective? Works on my TMO D2, and this guy claims it's good on the VZW model. Best of luck.
Click to expand...
Click to collapse
The green patch and this white one is the same product.
I was using a Nokia Fatboy charger which essentially is the same one you have with a bean bag cover over it.
Sent from my Samsung Note II

Does this receiver cause any bulge on the battery cover when installed? I want to try this but don't want to add any thickness. One review mentions a bulge so I figured I'd check here. Thanks!

it'll leave a slight bulge but barely noticeable. you have to know it's there to notice it and even then it only matters if you're using the soft silicone cases.
Sent from my GT-I9300 using xda app-developers app

I'm having this same issue I'm using the fastech and the white qui receiver on the Nokia Fatboy. I purchased 3 qi pads but only have the one Nokia charger to trst them on all the qi cards have reacted the same as the OP. What's strange is sometimes I place it on the charging pad and it will work but other times once phone goes to sleep it kills the charging and the light on the charger just blinks(not charging).
Sent from my SCH-I535 using Tapatalk 2

kameleongt said:
I'm having this same issue I'm using the fastech and the white qui receiver on the Nokia Fatboy. I purchased 3 qi pads but only have the one Nokia charger to trst them on all the qi cards have reacted the same as the OP. What's strange is sometimes I place it on the charging pad and it will work but other times once phone goes to sleep it kills the charging and the light on the charger just blinks(not charging).
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Wow! you tried three separate units?
So does anyone know what charging pad these patches work with???
Sent from my Samsung Note II

kameleongt said:
I'm having this same issue I'm using the fastech and the white qui receiver on the Nokia Fatboy. I purchased 3 qi pads but only have the one Nokia charger to trst them on all the qi cards have reacted the same as the OP. What's strange is sometimes I place it on the charging pad and it will work but other times once phone goes to sleep it kills the charging and the light on the charger just blinks(not charging).
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm beginning to think that the common thread here is FastTech. I'm going to get another receiver off eBay before I write off Qi charging on my S3. Bleh.

rossbeck said:
I'm beginning to think that the common thread here is FastTech. I'm going to get another receiver off eBay before I write off Qi charging on my S3. Bleh.
Click to expand...
Click to collapse
Report back your findings. Thanks!

docfong said:
Report back your findings. Thanks!
Click to expand...
Click to collapse
Will do. I'm going to also contact FastTech to see if they will send another... it does kind of bug me that they sent a 650ma one vs 700ma... i know, I know, the numbers probably mean nothing... but clearly the pictured product is NOT the one you will receive.

I did have one email with them but at the time I had only test one of the qi receivers. I will be sending another email out and hopefully get some responses. I just find it weird that they work at time and other times they don't.
Sent from my SCH-I535 using Tapatalk 2

[Q] Wiqiqi Wireless Charger Set

Does this Wireless Charger Set works on the T-Mobile Galaxy Note II?
Sorry, I Can't post links "new user"
Wiqiqi wireless set
/watch?v=sp0j4EiGdpg

bodock said:
Does this Wireless Charger Set works on the T-Mobile Galaxy Note II?
Sorry, I Can't post links "new user"
Wiqiqi wireless set
/watch?v=sp0j4EiGdpg
Click to expand...
Click to collapse
Very interested too. I modded my last note for touch ston3 charging but want impressed
Sent from my GT-N8013 using Tapatalk HD

I was just about to post the wiqiqi charging thing.
its very simple to install, it just slaps on the back of the battery and the connectors lay.... just watch this video =]
http://youtu.be/lb9NJWApwn4?t=9s

Nexus 5 battery case

Please post evidence of battery cases that are available or manufacturers that built Nexus 4 cases to watch.
Don't want one for a daily driver but for long airport travel and vacation days.

You can watch zerolemon, they did one for the n4.
http://www.zerolemon.com/details.ph...r-battery-case-2250mah-removable-battery-pack
Sent from my Nexus 7 using xda app-developers app

It took zero lemon months to get it out. I bought it and to be honest it wasnt a good product. I just carry a battery back in my bag when i know i will be gone for a while.

I emailed ZeroLemon about a Nexus 5 case, mentioning the back was fairly easily removable and whether they would be making one for the Nexus 5 and here's what they said:
This case will be out in mid January due to holiday season and project lineup with our other products.
Click to expand...
Click to collapse
I'd only be interested if it were a replacement battery and back as opposed to a "charging case"

catpunt said:
I emailed ZeroLemon about a Nexus 5 case, mentioning the back was fairly easily removable and whether they would be making one for the Nexus 5 and here's what they said:
I'd only be interested if it were a replacement battery and back as opposed to a "charging case"
Click to expand...
Click to collapse
I wouldn't trust them. They promised one for the Galaxy nexus from the Playstore and they never released it.
Sent from my Nexus 5 using Tapatalk

I also email zerolemon and they told me the same thing. I'm very interested in what they can come up with.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Not necessarily a case, but it can work with or without a case... http://www.power-skin.com/popn/samsung-battery-charger.php
I haven't used any of PowerSkin's products, but I ordered it so I'll experiment and see how it is.
(If anyone decides to buy it, this coupon gives $5 off.)
Coupon: RMENOT12

koriflame said:
Not necessarily a case, but it can work with or without a case... http://www.power-skin.com/popn/samsung-battery-charger.php
I haven't used any of PowerSkin's products, but I ordered it so I'll experiment and see how it is.
(If anyone decides to buy it, this coupon gives $5 off.)
Coupon: RMENOT12
Click to expand...
Click to collapse
Now that is very interesting. I wonder if it covers the camera? With the sale and the coupon that might just be worth it to get me through the few circumstances were I wouldn't have access to a charger. The thing that I like about this option is that I don't need to remove the existing case. Pretty cool idea.

Actually, I am not sure that this will work after looking at it. The micro USB port is backwards on the Nexus 5 as compared to the Samsung devices. Does that case allow you to flip the USB port direction or is it fixed?

jalanjkcarp said:
Actually, I am not sure that this will work after looking at it. The micro USB port is backwards on the Nexus 5 as compared to the Samsung devices. Does that case allow you to flip the USB port direction or is it fixed?
Click to expand...
Click to collapse
Well in any case, I can just mod or buy a usb cable.. thats really all that big gray thing seems to be. It's advertised Samsung, Motorola, Sony, and LG so... /shrug.
I can report after it arrives.

koriflame said:
Not necessarily a case, but it can work with or without a case... http://www.power-skin.com/popn/samsung-battery-charger.php
I haven't used any of PowerSkin's products, but I ordered it so I'll experiment and see how it is.
(If anyone decides to buy it, this coupon gives $5 off.)
Coupon: RMENOT12
Click to expand...
Click to collapse
This looks promising however remember that the USB port on the nexus devices are upside down compared to Samsung galaxy etc... Also the docks are not compatible
Sent from my Nexus 5 using XDA Premium 4 mobile app

I contacted them about the orientation of the USB port and they advised me that I should order the HTC model. It should be here tomorrow and I will report back. Hopefully they can update their website to accurately reflect the Nexus 5 after I provide feedback to them. Thanks.

LOGMD said:
This looks promising however remember that the USB port on the nexus devices are upside down compared to Samsung galaxy etc... Also the docks are not compatible
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I had them change the order to the HTC Pop'n which is the same thing, just with the USB facing the right way for the nexus.
http://www.power-skin.com/popn/htc-battery-charger.php

While I wait to see if any of the more traditional battery case vendors come out with a nexus 5 solution, I decided to buy this charger accessory in the meantime. My need for something like this is not a daily driver. It is very specific days like traveling all day in airports or an extremely long day of kids activities where I know I will not have access to a charger. I do own one of the battery backup chargers but there are some instances where that is a pain to carry outside of a bag and still have frequent access to your phone. This PowerSkin solution seemed like the best option at this point for my needs. I've received the product this morning and so far I am pleased.
They sell two different microUSB models of this accessory with the only difference being the orientation of the micro USB connector. Note that the Nexus 5 does not have a USB port oriented in the way that other LG phones do so it is actually the HTC version of this product that has the correct orientation and not the LG model. However, it turns out that this does not matter at all if you have even the thinnest case on your Nexus 5. The default tip that comes with this case is not deep enough to penetrate through even the thinnest case and make appropriate contact in the Nexus 5 USB port. You need to have an accessory flex cable in order to use this accessory on your Nexus 5. The model number for that flex cable is PN09 and you have to request it from customer service. It is kind of a pain but it is the only thing available on the market at this point. You have to disconnect the plug that comes with this charger and connect the flex cable instead. The battery is 2000 mah so it should give us a little less than twice our battery capacity on the Nexus 5.
This is a very nice looking accessory with a glossy black finish that is entirely one piece and very smooth. There is a on off button and for LED light that give you an indication of battery capacity. It is charged using a micro USB port on the side of the battery from any standard USB charger.
Photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks and follow-up questions:
Thanks a bunch for taking pictures. I have the same case and have a few questions:
1) I if you were to cut the rubber at the bottom of your case, do you think you'd be able to make the stock connector fit?
2) do the suction cups work well against both the phone and the case?
jalanjkcarp said:
While I wait to see if any of the more traditional battery case vendors come out with a nexus 5 solution, I decided to buy this charger accessory in the meantime. My need for something like this is not a daily driver. It is very specific days like traveling all day in airports or an extremely long day of kids activities where I know I will not have access to a charger. I do own one of the battery backup chargers but there are some instances where that is a pain to carry outside of a bag and still have frequent access to your phone. This PowerSkin solution seemed like the best option at this point for my needs. I've received the product this morning and so far I am pleased.
They sell two different microUSB models of this accessory with the only difference being the orientation of the micro USB connector. Note that the Nexus 5 does not have a USB port oriented in the way that other LG phones do so it is actually the HTC version of this product that has the correct orientation and not the LG model. However, it turns out that this does not matter at all if you have even the thinnest case on your Nexus 5. The default tip that comes with this case is not deep enough to penetrate through even the thinnest case and make appropriate contact in the Nexus 5 USB port. You need to have an accessory flex cable in order to use this accessory on your Nexus 5. The model number for that flex cable is PN09 and you have to request it from customer service. It is kind of a pain but it is the only thing available on the market at this point. You have to disconnect the plug that comes with this charger and connect the flex cable instead. The battery is 2000 mah so it should give us a little less than twice our battery capacity on the Nexus 5.
This is a very nice looking accessory with a glossy black finish that is entirely one piece and very smooth. There is a on off button and for LED light that give you an indication of battery capacity. It is charged using a micro USB port on the side of the battery from any standard USB charger.
Click to expand...
Click to collapse

http://www.ebay.com/itm/5600mAh-Ext..._Phone_PDA_Batteries&var=&hash=item43bb9d0f94
How about that? Any feedbacks? It worth the money?

davidbar93 said:
http://www.ebay.com/itm/5600mAh-Ext..._Phone_PDA_Batteries&var=&hash=item43bb9d0f94
How about that? Any feedbacks? It worth the money?
Click to expand...
Click to collapse
I never trust anything from Ebay. They may claim it's 5600mAh but I doubt it. If you want a power bank look on amazon for Anker or ravPower. I've used products from both companies and have never had any issues.

This looks pretty good, anyone know if this company is interested in making a case for the nexus 5?
http://www.mophie.com/shop/smartphones/juice-pack-htc-one
Also everyone should go checkout this thread: http://forum.xda-developers.com/showthread.php?t=2542589

If somebody has received this battery case then please do post the pics of the case with the phone...I just want to see how that looks with the phone...dont want a bulky one...

^I'm_With_Stupid said:
This looks pretty good, anyone know if this company is interested in making a case for the nexus 5?
http://www.mophie.com/shop/smartphones/juice-pack-htc-one
Also everyone should go checkout this thread: http://forum.xda-developers.com/showthread.php?t=2542589
Click to expand...
Click to collapse
Mophie makes good stuff. I haven't been impressed with then lately though and don't hold out any hope for the Nexus 5. Their official word still is that they "don't know" of their iPhone 5 case is compatible with the iPhone 5s. I've had to look elsewhere for my son's phone. It is long past time for them to take a position on the 5s.

Wireless Charging / Qi receiver?

Any wireless charging cover etc. announced / available?

mgutt said:
Any wireless charging cover etc. announced / available?
Click to expand...
Click to collapse
The Note 10.1 2014 Edition doesn't support wireless charging.

I know. Thats the reason why I opened this thread in the accessories forum.

mgutt said:
I know. Thats the reason why I opened this thread in the accessories forum.
Click to expand...
Click to collapse
If you know it does not why would you start a thread? It makes no sense. It does not have a removable battery cover so there is no way to add wireless charging without hardware modifications.
Sent from my dlx using XDA Premium HD app

nrage23 said:
It does not have a removable battery cover
Click to expand...
Click to collapse
Ok, thats new for me. But there is one chance. There could be a case with qi Receiver and usb connector or if it has pins for a docking station then with connection to them.

mgutt said:
californiarailroader said:
mgutt said:
Any wireless charging cover etc. announced / available?
Click to expand...
Click to collapse
The Note 10.1 2014 Edition doesn't support wireless charging.
Click to expand...
Click to collapse
I know. Thats the reason why I opened this thread in the accessories forum.
Click to expand...
Click to collapse
Lol I laughed so hard @ this.

mgutt said:
Any wireless charging cover etc. announced / available?
Click to expand...
Click to collapse
Have you popped the back cover off to see if the pins are there?
If they are then a modded qi receiver would work great.

I do not own the Note 10.1. Thats the reason why I'm asking dumb questions.
For the Note 8 someone added a Qi Receiver with USB connector and hide it under a case.

deathshead said:
Have you popped the back cover off to see if the pins are there?
If they are then a modded qi receiver would work great.
Click to expand...
Click to collapse
He is not talking about taking the back cover off. He is talking about a case that has a plug that goes into the existing charge port of the tablet and there is a wireless charging coil within the case itself.
No, I have not seen any.
Yes, I do want one.

Does the Note 10.1 2014 has Connectors for a Docking Station? If yes, this would be an option to realize it without using an usb connector.

mgutt said:
Does the Note 10.1 2014 has Connectors for a Docking Station? If yes, this would be an option to realize it without using an usb connector.
Click to expand...
Click to collapse
It does not have docking pins.

I, too, would love to add wireless charging capabilities to the Note.
I read a story on the iQi Mobile - Seamless Wireless Charging For iPhone and tried to find a similar product for micro usb ports. I came across a possible alternative but don't have any experience with the website/seller of the product.
(sorry, can't post links yet, remove spaces or search Google for "netimes Qi Standard Universal Wireless Charging Adapter for Samsung Micro-USB Connector")
www .netimes.com/shop/qi-standard-universal-wireless-charging-adapter-for-samsung-microusb-connector-p-4963 .html
Do you guys think something like this would work?
One disadvantage would be that you would have to unplug the cable to use a regular charging cable, but I think I could live with that.

in my opinion this seems legit and ok.
Of course it's annoying to remove the cable everytime, but for having wireless charging
l already thought about this on my HTC Eo 3D but did not want to spend too much money on that since it is no Must-have in my opinion.

Qi Enabled Wireless Charger Platform & Charge Receiver Samsung Galaxy Note 10.1 2014
www .amazon.com/Walsontop-Wireless-Platform-Charging-Compatible/dp/B00LC6WGB2 There are still people looking for the holy grail. "Human satisfaction.

you can attach a receiving case to the note 4, so why not the note 10.1 (2014) ?

As Qi supports 15 instead of 5 Watt (since 06/2015), we only need to wait for the next tablet generation. I think in the future we will see Qi on much more tablets.

mgutt said:
As Qi supports 15 instead of 5 Watt (since 06/2015), we only need to wait for the next tablet generation. I think in the future we will see Qi on much more tablets.
Click to expand...
Click to collapse
i think you are looking for this

No, because the quality is poor and it is qi 1.0. I think at the moment there are no qi receiver supporting qi 1.1?! And of course it would be much nicer to have a receiver built-in or under the battery cover.

Am I the only one that doesn't like qi charging? I have it and a pad for my nexus 5 and 7fhd and just don't use it that often. I use my phone often when it's on the charger and qi is much slower than the wire. I just can't see using it

Thats because you're using it wrong. I have 4 Qi pads and they are placed everywhere I stay for a longer time like bed, desk, couch, etc. By that its the most comfortable charging.
And if fast charging is the only reason you need to know that Qi released Version 1.1 with 15 watts (same speed as USB 3.0). But it seems Samsung bought exclusive rights at the moment (Note 5), so we need to wait for other devices supporting it. But I do not miss it.