Related
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Flash a newer recovery prior to flashing CM10.
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
Sent from my SGH-I747M using xda premium
such as
SaneinOne said:
Flash a newer recovery prior to flashing CM10.
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Such as...
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
okay
GlassRaven said:
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
Click to expand...
Click to collapse
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
EdwinForTheWin said:
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
Click to expand...
Click to collapse
I don't really recommend that as that could cause unwanted trouble. From my experience, I just followed the rooting guide that I posted, flash a custom recovery, and flashed the Cyanogenmod 10. Another tip, if you don't want to lose your contacts, make a backup of it before flashing a ROM. Preferrably you write them in a paper so it would be easier. If you have important messages, use an SMS/MMS backup tool to save them. As for applications, make a list of applications that you consider are essential for you so you could just redownload them. Starting out in a custom ROM is really hard at first but you'll get used to it.
Its safety is directly proportional to your ability to follow directions.
Your first mistake was you used the app to unlock the VERIZON S3 bootloader.
All other versions of the GS 3 have unlocked bootloaders.
You should definitely do some more research before you attempt root and custom recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Can you just use ROM Manager after rooting and flashing the stock ROM to download CWM, then CM10? And is the CM10 you're using on your Rogers phone compatible? I don't see a Rogers version on the CM site. Did you use the AT&T one?
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
tonymtl said:
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
Click to expand...
Click to collapse
What does touch recovery do? And do I have to use that link to flash it, or can I use ROM Manager? And if I were to use that link, I would DL the zip, boot my phone into download mode, plug in, open Odin, make sure auto reboot and F reset time are checked, load the .tar into the PDA, and click start? What happens to the previous ROM that was there?
And when I first root my phone, and load the stock rom, do all of my apps remain? I haven't rooted yet, for my Rogers phone.
A touch recovery lets you touch the screen as apposed to using the volume rocker.
You will keep all your data.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks for the help! Another question, if I would like to unroot my phone, and decrease the flash counter, is there a thread I should see for the I747MVLLH1? I know about triangle away, but Rogers/my model isn't supported for that.
Triangle away does support Rogers gs3
Thanks! So should I flash CM10 through ROM Manager, or through the link that was posted? I'm not exactly clear on how to flash the ROM through the link though. Does flashing a new ROM erase the previous ROM? And 'wiping cache' doesn't wipe your data/apps right, only 'wipe Data and Cache'? And I don't really need to bother with kernels too right?
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
tonymtl said:
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
Click to expand...
Click to collapse
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Yes it will ask you if you want to wipe, if you download cm10 ROM from ROM manager it will ask you if you want the latest gapps. You can get ROM toolbox or titanium backup to backup your apps and restore them after flashing rom. Backup is just in case but you can always flash stock ROM later if anything goes wrong.
ily112 said:
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Click to expand...
Click to collapse
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
s0ulja said:
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
Click to expand...
Click to collapse
How exactly would I flash through cwm recovery?
hey guys
let me start off by saying i am a noob to this site and android in general , ive learnt a lot from my galaxy s2 .
now i got the s3 , ive rooted it .. however i tried to upgrade to 4.1 awhile back . kept getting error .
anyways i want to upgrade to jellybean im sick of waiting like everyone else.
cm10 seems like a good rom , ive read a lot on this forum, could some one tell me what the first step is do i flash cwm first on the rogers stock or do i have to put ATT stock on it
thanks
cheers
Hi!
Welcome to the site! You'll really love the community here!
Here are some simple instructions I found for you: http://www.androidauthority.com/gal...elly-bean-cyanogenmod-10-cm10-preview-104742/
Just make sure you download the latest CWM from here (6.0.1.2 currently): http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-d2att.img
And flash it to your device.
Then follow those steps, wipe/format data partition, as it says there. CAREFUL make sure you download the latest CyanogenMod version from here too, the top one on the list is always newest, latest version came out today actually: http://get.cm/?device=d2att
Let me know how it goes and if you're enjoying it! Tried leaked version of JB on my S3 with Telus in Canada and didn't like the bugs in there...so let me know if the 'CM Finishing Touch' on there is really better than stock!
Michael
thanks man. i will give it a try soon and let you know..
so just i get this straight i can do everything from my rogers stock rom right .. i dont have to download the att stock rom ??
starting off with the flashing of cwm recovery ?
cheers
totti107 said:
thanks man. i will give it a try soon and let you know..
so just i get this straight i can do everything from my rogers stock rom right .. i dont have to download the att stock rom ??
starting off with the flashing of cwm recovery ?
cheers
Click to expand...
Click to collapse
Yup! Start off with CWM Recovery flash, when that's done, transfer file to device (internal sd card) and from the ROGERS stock rom you can do the apply update from zip option in CWM.
Michael
greenglue said:
Yup! Start off with CWM Recovery flash, when that's done, transfer file to device (internal sd card) and from the ROGERS stock rom you can do the apply update from zip option in CWM.
Michael
Click to expand...
Click to collapse
hey i downloaded all the files..
first i opened odin i couldn't find cwm in the pda. so i downloaded it again and added .tar at the end of the file name so it is now visible in pda odin
i flashed it succesfully however when i go to recovery mode it goes to android system recovery ?? not cwm recovery
iam i doing something wrong
totti107 said:
hey i downloaded all the files..
first i opened odin i couldn't find cwm in the pda. so i downloaded it again and added .tar at the end of the file name so it is now visible in pda odin
i flashed it succesfully however when i go to recovery mode it goes to android system recovery ?? not cwm recovery
iam i doing something wrong
Click to expand...
Click to collapse
Hmm...try ROM Manager free from the Play Store. If not just google around how to install CWM, installed it a while ago so I forgot sorry. But ROM Manager should work.
greenglue said:
Hmm...try ROM Manager free from the Play Store. If not just google around how to install CWM, installed it a while ago so I forgot sorry. But ROM Manager should work.
Click to expand...
Click to collapse
should i take off auto reboot then take out battery... i remember doing this when i rooted the phone . i think...
oh and for rom manager i cannot find my phone on the list , there isn't any galaxy s3 on it weird?
Hmm...weird. Guess it doesn't support the extra-super-duper-phone yet! Haha!
If you get the SGS3 All-in-one toolkit from here http://forum.xda-developers.com/showthread.php?t=1703488 , you can install CWM from it just make sure you have drivers installed, it can help you with that if you don't have them, and enable USB Debugging.
If that doesn't work, which I think it should, try to use this link a bit. Download the version they have it should be pretty recent.
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
Hmm...weird. Guess it doesn't support the extra-super-duper-phone yet! Haha!
If you get the SGS3 All-in-one toolkit from here , you can install CWM from it just make sure you have drivers installed, it can help you with that if you don't have them, and enable USB Debugging.
If that doesn't work, which I think it should, try to use this link a bit. Download the version they have it should be pretty recent.
i cant find my phone version on the tool kit :S
but why cant i get cwm to work with odin ? that is angering me lol
i just rooted it again with superuser with galaxys3uscanada and installed superuser through cwm version 5. somthing
hxxp://androidroot.org/watch_video.php?v=28GYMH82S6Y1#
with this video... but i had to remove the battery and take auto reset off for it not to overwrite cwm recovery
totti107 said:
i cant find my phone version on the tool kit :S
but why cant i get cwm to work with odin ? that is angering me lol
i just rooted it again with superuser with galaxys3uscanada and installed superuser through cwm version 5. somthing
hxxp://androidroot.org/watch_video.php?v=28GYMH82S6Y1#
with this video... but i had to remove the battery and take auto reset off for it not to overwrite cwm recovery
Click to expand...
Click to collapse
Oh so now you have CWM? Well as long as you have it, you'll only need it once or twice to erase all data, then install CM and GApps.
Ill try it with the cwm from the superuser one but I remember doing that it said error 9 or something
Sent from my SGH-I747M using xda premium
Quick question, I flashed CWM recovery using the terminal, and I see it when I boot into recovery, but when I go to ROM Manager to flash CM10, it says to flash CWM Recovery, and won't let me access the list. I would've flashed CWM from ROM Manager, but the S3 wasn't on the list of devices. Is there anyway to get around this?
ily112 said:
Quick question, I flashed CWM recovery using the terminal, and I see it when I boot into recovery, but when I go to ROM Manager to flash CM10, it says to flash CWM Recovery, and won't let me access the list. I would've flashed CWM from ROM Manager, but the S3 wasn't on the list of devices. Is there anyway to get around this?
Click to expand...
Click to collapse
Hi there!
Basically you must first but the CWM ZIP file on your internal sdcard then boot into CWM, from there go to install zip file or something like that, then select from SD Card, find the zip, you're done!
Don't forget to do a factory reset through CWM before the CM10 update and maybe after too.
Let me how it goes,
Michael
Never liked CWM, I personally love TWRP as a recovery. Go to the app store and download GooManager.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
But don't I already have CWM? Or is CWM and CWM Recovery two different things? Where would I get the CWM .zip for my rogers phone? I backed up my phone from recovery mode, does that mean I backed up my current ROM (stock rooted ROM)? And I backed up a few apps using Titanium Backup, if I use factory reset, would all my backups get erased? Thanks for your help!
ily112 said:
But don't I already have CWM? Or is CWM and CWM Recovery two different things? Where would I get the CWM .zip for my rogers phone? I backed up my phone from recovery mode, does that mean I backed up my current ROM (stock rooted ROM)? And I backed up a few apps using Titanium Backup, if I use factory reset, would all my backups get erased? Thanks for your help!
Click to expand...
Click to collapse
Hi,
CWM = CWM Recovery; same thing just shorter .
The ZIP file for your rogers phone can be found here: http://get.cm/?device=d2att
Click the one at the top of the list as it is the newest.
Don't worry about the ROM because worst case scenario if you want to downgrade to stock, you can re-download it online and re-root.
For the apps, it depends where your backups are, usually, in TitBak, the backups are stored in /sdcard/TitaniumBackup which will be safe as formatting to factory settings and data partition in CWM doesn't format the internal or external SD Card. But I am not responsable if it does so be careful!
Michael
Also, I just got a notification to update SuperUser, which takes me to the Playstore, but on I remember seeing not to update SuperUser on the thread where I was told how to root my phone. So do I update it or not?
ily112 said:
Also, I just got a notification to update SuperUser, which takes me to the Playstore, but on I remember seeing not to update SuperUser on the thread where I was told how to root my phone. So do I update it or not?
Click to expand...
Click to collapse
You can update it, I don't see what could go wrong because an update will only help fix things if there were bugs you had.
Okay, thanks! I'm going to use this <http://forum.xda-developers.com/showthread.php?t=1587607> guide to flash the cm ROM. But say afterwords, I want to unroot and remove the 'Modified' status of my phone, and return back to the stock ROM like nothing happened, and remove the flash counter. How would I do that?
ily112 said:
Okay, thanks! I'm going to use this <http://forum.xda-developers.com/showthread.php?t=1587607> guide to flash the cm ROM. But say afterwords, I want to unroot and remove the 'Modified' status of my phone, and return back to the stock ROM like nothing happened, and remove the flash counter. How would I do that?
Click to expand...
Click to collapse
That would be with Odin you would redownload the Stock ROM for Rogers and then flash it. To reset counter, you can download the app TriangleAway for free from the Play Store and with root, it resets the counter. Then you can unroot.
Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!
Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium
Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464
A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.
The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium
This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.
Hi, guys and girls.
I know this question sounds stupid, and someone might say: "Duuuh, use the seach-function!" - Well, I have, but as a new member it's pretty hard finding the things that I need when there's so many sections and such.
Now for my question:
At Christmas I recieved a Samsung Galaxy Gio. The phone is cool, and I like it a lot. However, I do wanna use a custom ROM. Can anybody tell me (step by step, please) how to do so? I have read the "Big thread For New Users", but somehow I managed to get lost in all of the fine new words.
I have done it before on my HTC Touch Diamond, (but I dropped it and now it won't start again) but I really can't figure out how to do so this time - and it would be sad to ruin my new phone by doing stuff I don't know anything about.
So, could anybody please be nice and tell me how to install a custom ROM? And please keep in mind that I'm a huuuuge newbie
I'm using Android 2.3.6
Thanks in advice.
Dennis
P.S. Would I be able to "revert" everything back to how it is now? Is there a way to "unroot" (I know there is, just not how to), and can the default ROM from Samsung be found anywhere?
okay so first DON'T use Rom Manager because it bricks your gio.
if you want to flash a custom rom you need to flash clockwork recovery. after that download "ext4 formatter" and flash it with cwm recovery (install zip->choose zip). download a custom rom and flash it in the same way as "ext4 formatter". wipe data and restart your phone... (clockwork mod recovery, ext4 formatter and custom roms can be found in development section)
if you don't like all these custom roms you can install the stock rom by downloading a stock rom on sammmobile.com and flashing with odin.
Sorry for my bad englisch
You made it sound so easy
Please keep in mind that I'm at huuuge newb. I don't know what half of the words you mentioned means. Could you please explain it a little more detailed?
Thanks,
Dennis
DennisHermannsen said:
You made it sound so easy
Please keep in mind that I'm at huuuge newb. I don't know what half of the words you mentioned means. Could you please explain it a little more detailed?
Thanks,
Dennis
Click to expand...
Click to collapse
You don't to be a delevoper if you want to flash your phone. It's really very easy if you read a few infos about this. One post above you have a list of things that you have to do but it's easy. You can do this in about 10 minutes. Very important is: you must know what you do. And do this ! Here you can view a lot of tutorials and links of roms, recorecys etc. :
http://forum.xda-developers.com/showthread.php?t=1623393
Ok, so I guess this is what I'm gonna do:
1. Doing a hard reset of my phone (wipe).
2. Root my Gio using this guide.
3. Downloading and flashing a custom ROM (I'm very unsecure on this step, please give a detailed "guide").
4. After flashing (is flashing the same thing as installing?), I start up my Gio and I'm gonna do a hard reset.
Is this the way to do it?
DennisHermannsen said:
Ok, so I guess this is what I'm gonna do:
1. Doing a hard reset of my phone (wipe).
2. Root my Gio using this guide.
3. Downloading and flashing a custom ROM (I'm very unsecure on this step, please give a detailed "guide").
4. After flashing (is flashing the same thing as installing?), I start up my Gio and I'm gonna do a hard reset.
Is this the way to do it?
Click to expand...
Click to collapse
1. Not needed to do before flashing but it doesn't hurt either
2. No need for ROOT if you plan flashing a custom rom. 100% of custom roms have root pre-installed.
3. Download the file, put it on your SD card (do not put it in any folder, just on your sdcard), go into recovery mode, chose install zip from sdcard, navigate to the file, chose it, chose Yes and wait for it to finish, do wipe data/factory reset and wipe cache partition from CWM and you're done!
4. Yes, start it up (it takes quite long time to boot it for the first time) and you may do the hard reset but i have never done it and my Gio is still working perfectly. And yes flashing and installing is basically the same thing.
P.S I know how you feel exactly atm. When i got my gio and learned about flashing custom roms and rooting, I was scared as well but now i have installed many roms and now it is like a normal thing for me. Have fun and DO NOT USE ROM MANAGER!
Don't forget to click thanks if it helped
DennisHermannsen said:
Ok, so I guess this is what I'm gonna do:
1. Doing a hard reset of my phone (wipe).
2. Root my Gio using this guide.
3. Downloading and flashing a custom ROM (I'm very unsecure on this step, please give a detailed "guide").
4. After flashing (is flashing the same thing as installing?), I start up my Gio and I'm gonna do a hard reset.
Is this the way to do it?
Click to expand...
Click to collapse
The first two steps are right. after that you are downloading the clockwork mod recovery (also called cwm) and the ext4 formatter from this thread http://forum.xda-developers.com/showthread.php?t=1421650. now you are entering the stock recovery. turn off your phone and restart it but hold the power and home button at boot. now flash the cwm zip file (in the thread is all explained how to do). restart the phone and enter the cwm recovery by holding power and home button at boot. go to "install zip" -> "choose zip" and choose the ext4 formatter zip file. okay now wipe data. download a custom rom and install it in cwm like the other zip files. wipe again data. now restart your phone.
and tadaaa it should work
ps: if you are from Germany (i think so because of your name) you can write me a pn if you need help and i can explain it in German
Sorry for my bad englisch
Hi,
Thanks for both of the answers - However, there is something that I'm confused about now. Jyrx, you say that I don't need to root if it's a custom ROM, because custom ROMs already have done a root. But emyaz tells me that it should be done. Aren't most ROMs from xda custom? Fx. this: http://forum.xda-developers.com/showthread.php?t=2062676 (CyanogenMod 10.1 [BETA 2.5]) - is this a custom ROM? If it is, I don't need to ROOT, right?
emyaz, unfortunately no - I'm Danish, and I know very little German
DennisHermannsen said:
Hi,
Thanks for both of the answers - However, there is something that I'm confused about now. Jyrx, you say that I don't need to root if it's a custom ROM, because custom ROMs already have done a root. But emyaz tells me that it should be done. Aren't most ROMs from xda custom? Fx. this: http://forum.xda-developers.com/showthread.php?t=2062676 (CyanogenMod 10.1 [BETA 2.5]) - is this a custom ROM? If it is, I don't need to ROOT, right?
Click to expand...
Click to collapse
Yes, like I said every custom rom has root. I think what emyaz thinks is that root is essential and if you don't install a custom rom you should root your phone. And your example has root and it doesn't need to be rooted.
EDIT: On XDA yes, there are basically only custom roms. If a rom isn't a custom rom or doesn't have a root then it is most certainly said in the topic.
You need to root your device before you start flashing roms. But is it nessesary to flash an ext4 formatter. I didn't do it. I do not have any problems. Where do you need it for?
Ardee - Sent from my Gio using xda premium app
Now I'm confused. One says that I don't need to flash, but others says that I need to.
I didn't root my phone before flashing roms. And I also haven't used ext4 formatter and it is working fine. So I don't know about that really.
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
Well I think for safety, root it. If you don't probably nothing will happen but I'm not sure, but if you do then nothing bad will happen either.
Half of the people answering give the wrong answers.
- root
- install custom recovery
- backup
Flash ext4formatter (cleans all partitions and mounts as ext4, no wipes needed, only use this first time installing a rom or after using ODIN to restore to stock)
- install rom
-reboot
Sent from my GT-S5660 using xda app-developers app
what i mean was that you need to root your device to install the cwm recovery. so the first step is to root your device and then install cwm recovery. sorry if i confused you
all custom roms are rooted...
Sorry for my bad englisch
Half of the people answering give the wrong answers.
Click to expand...
Click to collapse
Yep, I think I just bricked my Gio...
DennisHermannsen said:
Yep, I think I just bricked my Gio...
Click to expand...
Click to collapse
It won't boot or is the boot animation reloading?
Jyrx said:
It won't boot or is the boot animation reloading?
Click to expand...
Click to collapse
There's two boot screens next to eachother
Haha, oh God, I think I'm gonna wait until I have researched a little bit more...
When I tried to unbrick it, I flashed a wrong stock ROM (somehow Odin let me do it )
I need a really detailed guide on how to do it (install a custom ROM).. I've been trying to unbrick my phone for the last 1½ hours
Fortunately it all works fine now. I just need a detailed guide or something so I don't **** up
it wasn't bricked, thats the most wrong used term here on XDA.
voetbalremco said:
it wasn't bricked, thats the most wrong used term here on XDA.
Click to expand...
Click to collapse
Potato, potato - It wouldn't get past the to bootscreens, so I just took a guess.
U flashed ext4-formatter.zip?
Sent from my GT-S5660 using xda app-developers app
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.