So, i started building CM10.1 using androidarmv6 sources which are known for working with msm7x27a. I modified my device folder and it builds.
Any help would be apreciated.
If anyone is intrested in development please join #Lproj on freenode to exchange ideas
Current status:
- It boots to GUI [L5&L7]
- Camera works [L5&L7]
- ril partially works (no outgoing calls)
- sdcard works
TODO:
- outgoing calls
- video rec
- audio routing in calls (l7 only?)
And the thank you award goes to the following: @PecanCM @cybojenix @adfad666
device folders
here speaks of cm10.1, but I tried it and I can not figure out if there are any differences or not :/ :http://forum.android.com.pl/f759/cm10-avatar-rom-extreme-291710/
michelemascia7 said:
here speaks of cm10.1, but I tried it and I can not figure out if there are any differences or not :/ :http://forum.android.com.pl/f759/cm10-avatar-rom-extreme-291710/
Click to expand...
Click to collapse
Go to Settings > System > About phone and make a screenshot please.
I want to see if it really is CM10.1
CM10.1
It is not clear cm10.1 just my version of the beta, made by me cm10.1 and avatar rom from nexus 4 and firmware LG optimus G.
My version cm10.1 not publish.
crinca15 said:
Go to Settings > System > About phone and make a screenshot please.
I want to see if it really is CM10.1
Click to expand...
Click to collapse
I have now flashed the pac rom of Metallica, and can not do a screenshot :/
evidently it is not 10.1 as confirmed @szymel0
I just tryed RC7 of it! Works nice. I jumped from PACman Rom to Avatar CM10.1 without wipe cache or data...
But do I need CM10.1 gapps ?
crinca15 said:
I just tryed RC7 of it! Works nice. I jumped from PACman Rom to Avatar CM10.1 without wipe cache or data...
But do I need CM10.1 gapps ?
Click to expand...
Click to collapse
i had flashed cm10 gapps but careful not to go off topic :silly:
Please stay ontopic
michelemascia7 said:
i had flashed cm10 gapps but careful not to go off topic :silly:
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0B2Yt4LYuF0UuNDdEUXZYSmtxTFU&usp=sharing
RC9 Exists (Just to say, sry for off topic, had to say it)
EDIT : And I think you should ask some experience users of this, because they can help you (or not xD), I can´t help you, Since I entered on xda, I just did a ROM for galaxy gio, so a little of experience.
friends, i didn't understand one thing, i can flash Avatar EXTREME RC7 CM 10.1 , for my LG P700? or not is for our phone this rom? question by the read in this topic.
sorry for offs topic
your logcat say you are using normal qcom_display folder not legacy one and that's created this problem and which kernel you are using ? because
E/hwcomposer( 4290): FATAL:vsync_loop:not able to open file:/sys/class/graphics/fb0/vsync_event, No such file or directory
PecanCM said:
your logcat say you are using normal qcom_display folder not legacy one and that's created this problem and which kernel you are using ? because
E/hwcomposer( 4290): FATAL:vsync_loop:not able to open file:/sys/class/graphics/fb0/vsync_event, No such file or directory
Click to expand...
Click to collapse
I use qcom legacy from android armv6 and still get this error. Also I tried to use a branch from legacy droid that user adfad666 pointed me to and still getting the same error. I use stock 3.4.0 cm10 kernel. Are there any modifications I should make to kernel?
second logcat http://pastebin.com/6JGw1fvy
Sent from my LG-P700 using xda app-developers app
Maybe a problem with the drivers adreno 200?
I am not a developer (yet) but maybe try porting files from a device silmilar to ours and start modifying from there ??
Good luck on your work and hope you succeed
Sent from my LG-P700 using xda app-developers app
tudorsirb said:
I use qcom legacy from android armv6 and still get this error. Also I tried to use a branch from legacy droid that user adfad666 pointed me to and still getting the same error. I use stock 3.4.0 cm10 kernel. Are there any modifications I should make to kernel?
second logcat http://pastebin.com/6JGw1fvy
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
so 1st logcat with adfad666 display folder and 2nd logcat with androidarmv6 display folder right ? and i asked because it's strange you using stock cm10 kernel and vsync_event node not created
PecanCM said:
so 1st logcat with adfad666 display folder and 2nd logcat with androidarmv6 display folder right ? and i asked because it's strange you using stock cm10 kernel and vsync_event node not created
Click to expand...
Click to collapse
First is from a bad build where I forgot to add legacy. Second is from adfad's repo. with legacy I get the same errors.
EDIT: I use adreno blobs from cm10 should i use different ones for cm10? i also tried referece blobs from Qualcomm
Sent from my LG-P700 using xda app-developers app
tudorsirb said:
If anyone is intrested in development please join #p700 on freenode to exchange ideas
Click to expand...
Click to collapse
is this channel not being used then?
this morning I uploaded my device config for l5 which seemed to solve the egl error, however I haven't tried it since the last kernel, so don't even know if it boots (I was messing with the boot.img from alpha firmware, and source of the l3 ii)
hope this helps
cybojenix said:
is this channel not being used then?
this morning I uploaded my device config for l5 which seemed to solve the egl error, however I haven't tried it since the last kernel, so don't even know if it boots (I was messing with the boot.img from alpha firmware, and source of the l3 ii)
hope this helps
Click to expand...
Click to collapse
thanks, i fixed egl with it Now i'm stuck at boot animation with some weird errors.
tudorsirb you are my god!! I pray to you and hope cm10.1 will be finnished after the summer vacations!!
Sent from my LG-P700 using xda premium
ubuntuh said:
tudorsirb you are my god!! I pray to you and hope cm10.1 will be work after the summer vacations!!
Sent from my LG-P700 using xda premium
Click to expand...
Click to collapse
Thank cybojenix beacuse i'm getting loads of help from him
Related
As you should know, CyanogenMod 10 in itself is still a work in progress. The ROM still isn't near completion and a good bunch of features are still missing that were in for example CM9. So what I've decided to do is provide nightly builds of CM10 using modpunks work. Even though modpunk left as he has a new phone, his work on CM10 is basically complete since as far as I can tell everything works.
These builds will be nightly builds because every day cm change something in their code, some of these are feature adds some are bug fixes. These nighties can include the fixes and I am in no way working on or helping modpunk on cm10. I'm just providing nightly builds because CM10 is changing constantly and modpunk won't be uploading daily builds.
Changelogs are going to be a hard thing to do, so what I suggest is that you take a look here for a nightly changelog. It says it's for the GSM Galaxy Nexus, but it still includes the upstream CM changes. A guide to understanding this changelog is that all the changes start with the specific repo that has been modified (for example, if something in the framework was changed, the change will begin with "framework:"). If the first bit is anything other than a device (e.g. "i9000:", "maguro:", "toro:", etc.) then it's upstream and is included in the nightly.
I've created a script (which is here if anyone is interested), that will build and upload a nightly every day. And I guess that's all there is to it.
Downloads will all be hosted at the link below and obviously the file with the most recent date is the latest nightly.
http://www.goo.im/devs/dudeman1996/CM10-Nightlies_marvel
I guess no love for marvelc?
Sent from my marvelc using xda app-developers app
How it is diff from modpunks a0?
Anyway we are happy now...u and benny are working on JB...
Sent from my HTC Wildfire S A510e using xda app-developers app
Last .zip in your Goo.im is for daily use? Something fixed of modpunks Alpha0?
A little question... If I want to install the package "cm-10-20120911-EXPERIMENTAL-marvel-NIGHTLY.zip", can I overwrite it in my ROM? Or I have to do all the wipes and install like a new one?
Thanks!
Feyerabend said:
Last .zip in your Goo.im is for daily use? Something fixed of modpunks Alpha0?
A little question... If I want to install the package "cm-10-20120911-EXPERIMENTAL-marvel-NIGHTLY.zip", can I overwrite it in my ROM? Or I have to do all the wipes and install like a new one?
Thanks!
Click to expand...
Click to collapse
no wipes required, just flash it..
smartboy0668 said:
How it is diff from modpunks a0?
Anyway we are happy now...u and benny are working on JB...
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Same question.
Okay I'll clear this up and put it in op later. These builds will be nightly builds because every day cm change something in their code, some of these are feature adds some are bug fixes. These nighties can include the fixes and I am in no way working on or helping modpunk on cm10. I'm just providing nightly builds because CM10 is changing constantly and modpunk won't be uploading daily builds.
As for marvelc, it'll be coming soon.
Sent from my Galaxy Nexus using xda premium
New nightly is out. And as per request, it's now under my section in ROM Manager and Goo Manager (which has to be downloaded separately from the Play Store).
Is that now the unofficial development?
Any known bugs?
Thank you for that post, I was so waiting for a new build
iH8ra!n said:
Is that now the unofficial development?
Any known bugs?
Thank you for that post, I was so waiting for a new build
Click to expand...
Click to collapse
iH8ra!n please next time could you either read through the whole thread properly or use the search feature, thanks. Anyway Dudeman's already explained this. Quote below.
dudeman1996 said:
Okay I'll clear this up and put it in op later. These builds will be nightly builds because every day cm change something in their code, some of these are feature adds some are bug fixes. These nighties can include the fixes and I am in no way working on or helping modpunk on cm10. I'm just providing nightly builds because CM10 is changing constantly and modpunk won't be uploading daily builds.
As for marvelc, it'll be coming soon.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank's a lot this working realy better than the modpunks Rom. The home bottons now light and it's faster
I thing there is very much work to do, but now we have a ROM that can be used every day.
Try to edit the notification bar, the clan botton don't appear....
Dillllz said:
iH8ra!n please next time could you either read through the whole thread properly or use the search feature, thanks. Anyway Dudeman's already explained this. Quote below.
Click to expand...
Click to collapse
I already had a big argument 'cause of stuff like this. so, usually I read everything carefully and if it's still not "cleared up" for me I ask.
Well, already written in post #1 OP. So i do not need the quote.
Anyway, thanks for trying to help
Wtf, doesn't work neither Int2ext nor Data2sd. Bootloop.
Feyerabend said:
Wtf, doesn't work neither Int2ext nor Data2sd. Bootloop.
Click to expand...
Click to collapse
So often reported: USE Link2SD!!!
"Bootloop" while optimizing the Apps? No problem at all: Just plug out the battery and after three seconds plug it back in. Also had this problem, this "method" worked for me!
Feyerabend said:
Wtf, doesn't work neither Int2ext nor Data2sd. Bootloop.
Click to expand...
Click to collapse
Try this D2Ext+
http://forum.xda-developers.com/showthread.php?p=27538212
it work's for me
Sorry guys, the ROM Manager downloads won't be working because the downloads for that are hosted in my Dropbox, which has just been suspended for using too much traffic for 3 days. So until I can find a direct download mirror to host the files, ROM Manager downloads won't work any more. Use GooManager if you really do want OTA updates.
dudeman1996 said:
Sorry guys, the ROM Manager downloads won't be working because the downloads for that are hosted in my Dropbox, which has just been suspended for using too much traffic for 3 days. So until I can find a direct download mirror to host the files, ROM Manager downloads won't work any more. Use GooManager if you really do want OTA updates.
Click to expand...
Click to collapse
Damn, didn't know Dropbox would go all draconian. Thankfully Google Drive has been relatively accommodating.
starbuck79 said:
Try this D2Ext+
http://forum.xda-developers.com/showthread.php?p=27538212
it work's for me
Click to expand...
Click to collapse
Didn't work for me. Well, I'm gonna use Link2sd. I don't like this app, but better than anything. In Alpha0, Int2Ext+ worked, but not now
Thanks.
EDIT: Damn Link2sd. Dudeman, some flashable .zip like Int2ext or S2ext or whatever could work? I'm having some troubles with Link2sd.. Thanks.
is the Camera works ? Anyone?
Thank you for giving this strong little phone such great support. I own an I777 SGS2, but keep up with this section for my friend who has the MarvelC. I will surely throw some beer money your way for some MarvelC nightlies, keep up the great work Dudeman1996 and Modpunk!
Hello All,
We all know that we already have enough ROMs and PORTs available for our WFS. We have very stable CM9 and MIUIv4. Also we have nearly stable CM10 but we haven't got any MIUI Jelly Bean port. So I decided to give a try.
Finally I have got working MIUI JB port. Thanks to all those who helped me [Credits at end of the post].
I am still working on this port and not being developer I am still facing some issues in this port. Though it's working its not advised to use it as daily driver. Use this ROM for test purpose only.
There are some bugs and may get some more. So please have patience. Tester's feedback are always welcomed.
I am not a full time developer. So I may or may not be able provide regular updates/fixes. Feel free to use this ROM for any improvements.
This is plain ported ROM. With no tweaks, add-on etc. Use them as per your taste. I have used this ROM more than one week hardly with any issues. Though I never play any videos or record one using phone. Also I rarely use GPS. So I didn't tested these features.
MIUI v4.1 Jelly Bean
Details:
Base ROM - Oliver's Latest CM10 build
MIUI ROM - MIUIAndroid's Nexus S 2.10.26
What's Working:
Wi-Fi
Data Network
Camera
Everything as in CM10 [not tested all things]
What doesn't work:
Headsets - Use toggleheadset from Google Play
On first boot it gets 2-3 soft-rebootsFixed
Themes - create an empty directory /data/system/theme
Video Recording and Playback - Working now
Tell me your issues
Download:
v1 http://goo.gl/y8UPt
v2 http://goo.gl/aTS5A 2012-11-25
Changes:
2012-11-25
Updated CM10 base to Oliver's latest build
Multilingual support
Bootloops after install fixed
Basic gapps included
Fixes:
Xperia Keyboard Fix : http://goo.gl/TfA5D Flash the zip or push the contents using file explorer
Screens
goo.gl/2Q9sk
MIUI v4 ICS
Details:
Base ROM - Modpunk's CM9
Tweaks by kantry123
What's Working:
Everything as in CM9 [not tested all things]
What doesn't work:
Tell me your issues I'll fix them asap
Download:
v1 http://goo.gl/8Z7CC
Changelog
2013-01-23
Initial ICS Build 2.10.26
Thank you.
Credits
CM Team
MIUI Team
Ivan/Ben/Modpunk/Oliver all CM10 devs for WFS
MIUIAndroid
kantry123 for tweaks
Henry for resolving themes issue
Lens_flare/CosminDan for porting tutorial
My Little WFS - for bearing my experiments
Great ROM outside of the reboots...
Subscribed.
ilive12 said:
Great ROM outside of the reboots...
Subscribed.
Click to expand...
Click to collapse
Thanks for feedback. Use No-frills CPU to overclock. Also do let me know any other issues in case.
Wow ! I am testing it right now and it is amazing !
Just one big problem : no French support but I'll wait.
A little bug : the xperia keyboard FC.
Sent from my Wildfire S A510e using xda app-developers app
I missed the lib for keyboard. I'll upload flashable zip in sometime.
And do you have an idea for the release of a French version ?
izi501 said:
And do you have an idea for the release of a French version ?
Click to expand...
Click to collapse
Flash this for xperia keyboard fix http://goo.gl/TfA5D. If flash failed then push the contents using file explorer.
I'll try to include french support during weekend.
Please add German language too.
Sent from my HTC Wildfire S A510e using xda app-developers app
ak0r said:
Flash this for xperia keyboard fix http://goo.gl/TfA5D. If flash failed then push the contents using file explorer.
I'll try to include french support during weekend.
Click to expand...
Click to collapse
I can flash the zip but the keyboard still FC sometimes :-/ Maybe a lib is still missing ?
Sent from my Wildfire S A510e using xda app-developers app
Just another question : is Google Now included in the ROM ? Because I can't find it...
Envoyé depuis mon HTC Wildfire S
izi501 said:
Just another question : is Google Now included in the ROM ? Because I can't find it...
Envoyé depuis mon HTC Wildfire S
Click to expand...
Click to collapse
No. It's not.
Downloading now.....
Screen shots got me hooked to this...
really great work....!!!!
Sent from my Wildfire S using xda app-developers app
the.h.t.c.king said:
Downloading now.....
Screen shots got me hooked to this...
really great work....!!!!
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
Thank you. Do give feedback. Also keep in mind that this ROM totally plain port. It doesn't have any tweaks or add-ons. Basic Gapps included. Use No-Frills to overclock CPU.
Mobile Data is working for me it just says downloaded 0Kbs but does not work
ak0r said:
Thank you. Do give feedback. Also keep in mind that this ROM totally plain port. It doesn't have any tweaks or add-ons. Basic Gapps included. Use No-Frills to overclock CPU.
Click to expand...
Click to collapse
Ok! all's cool, its fast, had those reboots in the beginning, all's well now,, though I am having trouble with the mobile network bit... it connects and disconect....
btw u r using the kernel version-- [email protected]
I also had the data problem in the nightly builds of dudeman1996 who uses the same kernel.. if u can u could try the kernel that benjamingwyn uses in his cm10, its a bit different(by name other than that I know nothing about kernels) i think, but i get the internet working in that version of jellybean so there is something there....
I hope I did help you in some way...
regards,
aditya...
the.h.t.c.king said:
Ok! all's cool, its fast, had those reboots in the beginning, all's well now,, though I am having trouble with the mobile network bit... it connects and disconect....
btw u r using the kernel version-- [email protected]
I also had the data problem in the nightly builds of dudeman1996 who uses the same kernel.. if u can u could try the kernel that benjamingwyn uses in his cm10, its a bit different(by name other than that I know nothing about kernels) i think, but i get the internet working in that version of jellybean so there is something there....
I hope I did help you in some way...
regards,
aditya...
Click to expand...
Click to collapse
Thanks for suggestion. I'll check this tonight.
ak0r said:
Thanks for suggestion. I'll check this tonight.
Click to expand...
Click to collapse
sure..
hope you fix it asap...
cheers..
:victory::victory:
Try using benjamingwyn's cm10 as base rom.... that would be easier and faster maybe.. because i tried to get a flashable kernel of his cm10 and i cudn't find it.... using bens cm10 as base gives u the kernel and the stability it now has.. i am using that version of cm10 as my daily driver....
Also for other users a sugestion, for video recording try using video illusion frm market.. it records video and is a good replacement to the default one at the moment...
Sent from my Wildfire S using xda app-developers app
If u r not interested in working on this please say so,...
We haven't heard a peep frm you, in so long...
You have created a master piece amd left it to be lost in the forum by not supporting it.. i knw you have a life and its your wish to work on anything you want,, but atleast tell us about your plans,,,,
If the development's on hold then you change the thread heading... we have been expecting to hear frm your side for so long now... you seemed very polite and you kindly replied to me...
So, it is my request to you to, atleast inform us abt the progress you have made on this rom since the last release. And if you don't then this thread shud be removed by the moderator, without anymore delay.....
Regards,
Aditya
Sent from my Wildfire S using xda app-developers app
the.h.t.c.king said:
If u r not interested in working on this please say so,...
We haven't heard a peep frm you, in so long...
You have created a master piece amd left it to be lost in the forum by not supporting it.. i knw you have a life and its your wish to work on anything you want,, but atleast tell us about your plans,,,,
If the development's on hold then you change the thread heading... we have been expecting to hear frm your side for so long now... you seemed very polite and you kindly replied to me...
So, it is my request to you to, atleast inform us abt the progress you have made on this rom since the last release. And if you don't then this thread shud be removed by the moderator, without anymore delay.....
Regards,
Aditya
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
Be patient I tried porting latest MIUI but there too many bootloops. So now I am only working on languages. Also Oliver has released a new CM10 with working camcorder and videos. I'll use that as base if it actually works smooth.
Well, i have compiled android 4.2 from sources, with cyanogen mod 10 device tree.
Working:
- booting
- sound
- most apps (cam is not working because sdcards don't get mounted)
upload finished:
http://rootaxbox.no-ip.org/derteufel/test/
to everyone posting a logcat:
please use pastebin.com for this. otherwise the thread isn't readable at the phone.
installing:
i recommend doing a wipe before, although, i was able to flash it without wipe (cominig from my hellybean rom)
please make a nandroid before!
this is a good summary:
Bejda said:
Wifi worked for me but no network,i noticed the apns-conf.xml was very partial with only some T-mobile stuffs but my attempt to replace it with CM10 one didn't solves nothing (well replaced but still no network).
Hard to manage things once on the pre-Alpha with no access to sdcard so prepare your backpack lol,i had chance i already had a CM10 apns-conf cwm zip on sd.
From recovery only sdext is mounted via usb but it's still a way to push flashable zip/install from ext.On running device Mtp gives no error but mounts nothing.
I came no wipe and my apps was there at first boot but disappeared after a reboot.
Root was a problem too apparently,i didn't had much time and only tried to put busybox in /system/xbin but didn't worked.
I'm saying all this just for those wanting to give it a try to be prepared,make arrangements before and then maybe extend their test
Click to expand...
Click to collapse
Thanks
Envoyé depuis mon GT-I9000 avec Tapatalk
This is great!
Edit: Did CM team fixed the surface flinger incompatibility issue?
EditEdit: if you can get KLP kernel for cappy it be easier to work with...
Woow! You must become the essential Dev... You're everywhere! Great job! Thanks!
Thank you DerTeufel
Testing..
//-->
It's fantastic, thanks man.
Wow!
Segue o que sentes
Bravo !!!
U r the BEST
Thanks , gonna try it
Sent from my GT-I9000 using xda app-developers app
What's new in 4.2 compared to 4.1.2?
♻ slim bean 3.0 all stock ♻
WOW!!! You're the beeeest! The will call HellyBean 4.2? :highfive: Or simply AOSP?
Weedalot said:
What's new in 4.2 compared to 4.1.2?
♻ slim bean 3.0 all stock ♻
Click to expand...
Click to collapse
come on..
Sent from my GT-I9000 using xda app-developers app
thank you very much der teuferl
DerTeufel is golden!
Sent from my GT-I9000 using xda app-developers app
Great work Der Teufel!!!
Call and sms is working?
Sent from my GT-I9000 using xda premium
Actually no call, data, 3G, wifi..., but probably soon .
Good job DerTeufel1980 !!!
Sent from my GT-I9000 using xda app-developers app
Headstrike85 said:
Actually no call, data, 3G, wifi..., but probably soon . Good job DerTeufel1980 !!!
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
WiFi is kernel related so he has to tweak the kernel to work with 4.2.
Call and Data is something all AOSP(my ROM) and Ports(Elite's ROM) is facing with 4.2 build. Im not sure but it seems if the baseband has been editted for 4.2... Bluetooth drivers has been tweaked as well but seem to be working fine with missing files. Another problem is Surface flinger which CM team is working on currently.
My build has some FC and random reboots, think Google needs to revise their source tree. I'll resyn my code and build again.
AceofSpades90 said:
WiFi is kernel related so he has to tweak the kernel to work with 4.2.
Call and Data is something all AOSP(my ROM) and Ports(Elite's ROM) is facing with 4.2 build. Im not sure but it seems if the baseband has been editted for 4.2... Bluetooth drivers has been tweaked as well but seem to be working fine with missing files. Another problem is Surface flinger which CM team is working on currently.
My build has some FC and random reboots, think Google needs to revise their source tree. I'll resyn my code and build again.
Click to expand...
Click to collapse
Totally agree. At this point, this rom is more for letting everyone test android 4.2
Do you have pushed your changes to github? I just did (hope I did not miss something, I am really tired).
Sent from my GT-I9000 using Tapatalk 2
Since Spyke555 is busy, I updated cm10.1 with his last device tree.
You can download from http://dualhoki.vim.hu/bubor/dev/10.1/cm-10.1-20131024-UNOFFICIAL-i927.zip
Please read http://forum.xda-developers.com/showthread.php?t=2217288
It has same issues. Cm has security bugfix, and I want to keep cm up to date.
- Gps was fixed.
20131025: update to cm 10.1.3, increaes dalvik.vm.heapsize, android_packages_app_settings at b1755aad3d3ad2ac0e72297a6b4b60031d15ff69
20150826: cm security update
issue
same as other cm 10.1
settings -> about crash
ghost call: please try litekernel
Updated kernel here: http://dualhoki.vim.hu/bubor/dev/11.0/tegra-reserved-192mb-kernel-only-oldone.zip with lowered tegra reserved memory ( more usable memory)
Litekernel found here
Androide3 said:
Home long press not work
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
And you may set app switch key to voice search, so mic key will work as voice search.
Didn't have time to test everything but gave it a quick spin but noticed something right away... Couldn't download from playstore. Gave some error about couldn't find information.
Had to go back to spykes last version which is dd, will try to play more later. for reference I don't have any playstore issue after restore.
Neuntoter said:
Didn't have time to test everything but gave it a quick spin but noticed something right away... Couldn't download from playstore. Gave some error about couldn't find information.
Had to go back to spykes last version which is dd, will try to play more later. for reference I don't have any playstore issue after restore.
Click to expand...
Click to collapse
Was that clean install?
I can install app from play store.
bubor said:
Was that clean install?
I can install app from play store.
Click to expand...
Click to collapse
The only thing I didn't wipe was the sdcard.
I will give it a better shake later today. Were you using tonyg-nonneon gaps?
Neuntoter said:
The only thing I didn't wipe was the sdcard.
I will give it a better shake later today. Were you using tonyg-nonneon gaps?
Click to expand...
Click to collapse
yes
bubor said:
Since Spyke555 is busy, I updated cm10.1 with his last device tree.
You can download from http://dualhoki.vim.hu/bubor/cm-10.1-20130725-UNOFFICIAL-i927.zip
Please read http://forum.xda-developers.com/showthread.php?t=2217288
Click to expand...
Click to collapse
kudos bubor !
Unfortunately it seems the same issues that Kick is having with calls is present here as well so it's definitely seems to be something from CM. I haven't had anyone try to call me but I made a test call and was unable to end the call.
m1batt1 said:
Unfortunately it seems the same issues that Kick is having with calls is present here as well so it's definitely seems to be something from CM. I haven't had anyone try to call me but I made a test call and was unable to end the call.
Click to expand...
Click to collapse
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
bubor said:
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
Click to expand...
Click to collapse
I just got to work and won't be able to test until later tonight but I'll check it out and let you know.
Sent from my SGH-I927 using xda app-developers app
bubor said:
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
Click to expand...
Click to collapse
i tried it and calls work normally, i can end a call and i can recieve calls with no problem!
bubor said:
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
Click to expand...
Click to collapse
Hey! I'm at work currently but got chance to test it so here it goes what I found.
Calls: ok. I did 2 calls, receive 2 calls, did 1 outgoing call and put speaker, and receive 1 call and also test with speaker. So far all calls had audio.
Skype, and this is interesting. I tested from the glide to my work skype account, and in the glide the audio is still broken:
- Calling from glide to pc: I could hear myself ok ON the PC (so lets say the other side could hear me), but not FROM the pc, I heard it was all all deep and slow (nothing new to me there). I could even turn on the video call and it worked.
- Calling from pc to glide, skype in the glide just dies and restarts.
I'm sorry I cannot test more, I'm at work. I was using CM 10.1 RC2 from spyke555 and dirty flashed this one (just cleared cache and dalvik).
Bubor, if you can think a protocol for testing specific things (for example 1-test X and note results, 2-test Y and note resulted, after all tests report back to forum with results) somehting like that that would be equal among all that we are testing and might give you insight of the problems or if you need to test just 1 particulare thing, well, for that thing.
Keep it up people, let's give the devs what they need, tests, reports, results, they give us their time doing this, we must at least do the same!
Bubor, its CM10.1.2 o 10.1
Sent from my SGH-I927 using xda app-developers app
ugoPS said:
Bubor, its CM10.1.2 o 10.1
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
10.1.2, you can check in about phone -> "view changelog"
Skype doesnt work. This build should be same as before, same bugs.
Okay. Did full wipe of sdcard and all, now no issues with play store.
Now I have never had voice search work with hot word detection, and that is still the case. Am I just lame or is this the way it should be. I had heard people talk about it working before.
Calls work. Both directions 4 times each tested. can hang up etc.
Unless there is something else supposedly fixed I guess it works for me.
How did you include the kernel? Just put the zip in the kernel/samsung/i927 folder?
Also are you still using the proprietary vendor files from The Covenant?
I know libril is a library for radio access but can you help me understand which one we need and how to include it in the build?
Thanks for any help you can provide still working on my first build after hours of downloading cm repo.
Neuntoter said:
How did you include the kernel? Just put the zip in the kernel/samsung/i927 folder?
Also are you still using the proprietary vendor files from The Covenant?
I know libril is a library for radio access but can you help me understand which one we need and how to include it in the build?
Thanks for any help you can provide still working on my first build after hours of downloading cm repo.
Click to expand...
Click to collapse
this device tree including kernel binary and modules. It would fail to build, if you include kernel source with this device tree.
Both device and vendor files you can found http://dualhoki.vim.hu/bubor/dev/cm-10.1-20130726-UNOFFICIAL-i927.tgz
You need one more thing that is https://github.com/CyanogenMod/android_hardware_samsung (just change _ to / for correct path)
bubor said:
this device tree including kernel binary and modules. It would fail to build, if you include kernel source with this device tree.
Both device and vendor files you can found http://dualhoki.vim.hu/bubor/dev/cm-10.1-20130726-UNOFFICIAL-i927.tgz
You need one more thing that is https://github.com/CyanogenMod/android_hardware_samsung (just change _ to / for correct path)
Click to expand...
Click to collapse
When you say kernel binary you mean the zip I download from kickass right? Are you saying I just put that in the kernel/samsung/i927 folder and it will automatically be included?
Just to clarify.
Get rid of device tree I got from spyke555's GIT and use the ones from your tgz. Now I assume I still put them in device/samsung/i927 and vendor/samsung/i927 right?
for the https://github.com/CyanogenMod/android_hardware_samsung
Do I just git clone that into the root? Or where should I be putting this?
Sorry for all the questions but I want to make sure I learn this and am a help later on.
Neuntoter said:
When you say kernel binary you mean the zip I download from kickass right? Are you saying I just put that in the kernel/samsung/i927 folder and it will automatically be included?
Just to clarify.
Get rid of device tree I got from spyke555's GIT and use the ones from your tgz. Now I assume I still put them in device/samsung/i927 and vendor/samsung/i927 right?
for the https://github.com/CyanogenMod/android_hardware_samsung
Do I just git clone that into the root? Or where should I be putting this?
Sorry for all the questions but I want to make sure I learn this and am a help later on.
Click to expand...
Click to collapse
Depend what is in your boardconfig.mk, if it has prebuild things, you would not put kernel source, but put kernel binary.
TARGET_PREBUILT_KERNEL := device/samsung/i927/prebuilt/kernel
TARGET_PREBUILT_RECOVERY := device/samsung/i927/prebuilt/recovery.img
If you use kernel source, it would be:
TARGET_KERNEL_SOURCE := kernel/samsung/i927
TARGET_KERNEL_CONFIG := tegra_bose_defconfig
Where keren source path, and the other is the defconfig what is in kernel/samsung/i927/arch/arm/configs
When you change _ to / in android_hardware_samsung you get android/hardware/samsung where android is the dir where you start, so you put to hardware/samsung. With command
git clone https://github.com/CyanogenMod/android_hardware_samsung hardware/samsung
Click to expand...
Click to collapse
Or you can put to the manifest, so repo sync will update to you.
If you wish, I could put whole directory to somewhere, but it would be something like 30giga.
Thank you Bubor! Couldn't of done it without you!
It appears to be building. I guess I won't know for sure until it is done.
bubor said:
Since Spyke555 is busy, I updated cm10.1 with his last device tree.
You can download from http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
Please read http://forum.xda-developers.com/showthread.php?t=2217288
It has same issues. Cm has security bugfix, and I want to keep cm up to date.
Last month I tried to fix tinyalsa, what fix most sound issue ( except bt calls). I'll keep trying.
Click to expand...
Click to collapse
Bubor, local forum users say that GPS is finally fixed in your build. I can confirm that, now GPS status and toolbox shows much more sattelites than previous CM versions. Thanx for that!
Introducing CyanAOSP for the Nexus S 4G
FAST / STABLE / SMOOTH
This is a port of CyanAOSP form the I9000 Galaxy S.
This is a port, not a true build, there are no feature requests and possible bugs..
XDA: DevDB Information
CyanAOSP KK4.4.2 ROM, a ROM for the Samsung Galaxy S I9000
Contributors
ts1506
ROM 4.4.x KitKat
KERNEL CM 3.0.101
BASED ON: CyanogenMod 11
Version Information
Type Port
Status UNTESTED
Current Version: 3.4.0
Created 2014-04-05
Last Updated 2014-04-05
What's Working
???
Known Bugs
Please report
This hasn't been tested and may not be working, so flash at your own risk!!
I am not responsible for any issues that you or your phone have due to flashing this, nor for world hunger..
ENJOY!!
How to install
**Always make a back up**
1. Download rom/gapps and put on SD card
2. Wipe system, data , cache , dalvik cache
3. Install CyanAOSP ROM and gapps (any 4.4.2 version should be fine)
4. Reboot and enjoy!!
* I don't recommend dirty flashing if coming from a previous version.
Don't complain about bugs when you didn't do a clean install..
Download Link
ROM (test)
DOWNLOAD v3.4.0
GAPPS
Download
Credits (No particular order)
cyanogenmod team
pawitp
stratosk
fishears
mnazim
SlimTeam
DerTeufel1980
kasper_h
zeppellinrox
slaid480
alberto96
darkargon (for hosting)
atomixxx (for new logo)
Omni ROM Team (xplodwild , Entropy512 and many more)
and many others
CHANGELOG
v3.4 (test)
* Initial build based on CM11 crespo 4g
* Updated camera, browser and other apps
* Added MI file explorer
* Uses Slim's keyboard
v3.4 (test 2)
*Changed kernel
v3.4 (test 3)
*Merged some libraries
*Added Slim Gapps
v3.4 (test 4)
*Reverted some libraries from port
v3.4 (test 5)
*Added more reverted libraries from port
v3.4 (test 6)
*Reverted to original kernel
Reserved
x2
Many thanks!!! Will try this tonight
May the ROM Gods bless you and your family for all eternity!
Sent from my LG-gee using xda app-developers app
I couldn't get this to boot for me... It got stuck at boot animation... Anyone have success with it?
Sent from my LG-gee using xda app-developers app
PartimusPrime said:
I couldn't get this to boot for me... It got stuck at boot animation... Anyone have success with it?
Sent from my LG-gee using xda app-developers app
Click to expand...
Click to collapse
I'll make another attempt..
btw, thanks for testing..
Setting.Out said:
I'll make another attempt..
btw, thanks for testing..
Click to expand...
Click to collapse
No bro... Thank you for building it :thumbup::thumbup:
Sent from my LG-gee using xda app-developers app
Here's the next rom..
Fingers crossed..
DOWNLOAD
Here's test 3, it has Gapps as well....
DOWNLOAD
Here's test 4
DOWNLOAD
I'm trying to get these to you as fast as possible..
I have six in total.. if none of them work, you've lost me.. lol..
Test 5
DOWNLOAD
Test 6
DOWNLOAD
Good luck..
Oh wow! Thanks!!!
Sent from my LG-gee using xda app-developers app
well damn youre going above and beyond expectations as to keeping this device alive. good ish man, guess i gotta charge up if im gonna try these and i didnt even get around to transferring the first test build over to my device yet lol.
Sent from my Icrak Killer using Tapatalk
So, did any of the test roms boot all the way up?
I added some info about the changes in the test roms in the OP..
Setting.Out said:
So, did any of the test roms boot all the way up?
I added some info about the changes in the test roms in the OP..
Click to expand...
Click to collapse
Sorry...I downloaded them all and tested 2, 3, and 4...need to test 5 and 6. So far no luck but i have my fingers crossed! :fingers-crossed: Thanks again bro!
Well 5 and 6 didn't work either
Stuck at boot animation. Has anyone else tried this out?
Sent from my Nexus S 4G using xda app-developers app
gotta go get my ns4g back from the in laws house left it there on accident, only ones i was able to test were the first 2. sorry for not reporting back had completely forgot about it.
Can anyone get me a logcat?
Sent from my Nexus S using XDA Premium 4 mobile app
Setting.Out said:
Can anyone get me a logcat?
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure thing bro...I'll try it out when I get home tonight.
Sent from my LG-gee using xda app-developers app
was only able to get a recovery log for you, i never got around to installing ns4g drivers a few months back after re installing windoze. will get on it later today but the log is from your initial test zip. sorry bro...
on a side note @PartimusPrime you did a hell of a job on the C-rom bootanimation that ish is SICK!