I normally hate cases, hate them. This thing is so thin and clear and minimal, it's great! It's the slimmest case I've ever seen. And it's not that hard plastic crap, its a nice flexible piece that is very durable. It snaps right in with ease, but also holds the phone in really well. It still covers enough to protect the phone from normal drops on the ground. I was tossing it around and dropping it just to test it out last night. When it lands on its face, the case has just enough of a raised edge above the screen to protect the entire front side. The back is completely protected, but it's super clear so you can see everything. The sides have really stylish cutouts that allow for perfect use of the IR sensor, headphones, volume, camera, flash, microphones, and charger. It covers the SIM port too, which is good because it rarely gets used, but needs the protection from elements. The case is perfectly clear and also has a slight glimmer to it that makes it looks really attractive. Like I said, I HATE using cases but I love this one. You can't beat under $10 for this...
I actually got a promotion, don't know if it's still going on, but it was $2 off and brought my order to $4.99!!! With $3.98 in shipping. Only paid $8.97 grand total. It was also conveniently located in Atlanta, so I expected to get it next week, but instead got it the very next day.
http://www.amazon.com/computers-accessories/dp/B00AW18HPW
To get the promotion and cheaper deal, click the other buying choices under the Add to Cart button on the right. It will have other options starting at 6.99.
I've been looking into getting this case for review, I may end up buying one since it's much cheaper than the Spigen clear case.
ChrisM0678 said:
I've been looking into getting this case for review, I may end up buying one since it's much cheaper than the Spigen clear case.
Click to expand...
Click to collapse
You honestly can't go wrong at all, given the price. I drop tested it 5 times last night on hard tile, it survived all 5 just fine, with leaving a small scratch mark on the back. But because of the aluminum silver color of the phone, it's honestly hard to tell that it's even there. I actually had to search hard for any damage. I really like that it's flexible, so that when it does have impacts it doesn't just shatter, it absorbs.
Syn Ack said:
You honestly can't go wrong at all, given the price. I drop tested it 5 times last night on hard tile, it survived all 5 just fine, with leaving a small scratch mark on the back. But because of the aluminum silver color of the phone, it's honestly hard to tell that it's even there. I actually had to search hard for any damage. I really like that it's flexible, so that when it does have impacts it doesn't just shatter, it absorbs.
Click to expand...
Click to collapse
Do you think it would look just as good on the Black HTC One? Is it really crystal clear, as in no yellowish tint?
ChrisM0678 said:
Do you think it would look just as good on the Black HTC One? Is it really crystal clear, as in no yellowish tint?
Click to expand...
Click to collapse
No yellow
Using it right now on my HTC One, I did a post a while back but I definitely recommend it. It's even better than the HTC original cases I have tried.
Could we get some pics plz ?
Related
Anybody who is interested in the Bear motion cases from Amazon:
http://www.amazon.com/gp/product/B00BVWJ94E/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
These are very nice thin and light hard case that will give light protection for your phone while still being stylish. My two case came in the other day (Black/Gray). I have not receive my One yet but the cases feel real nice in the hand. So if you are looking for a thin and light case, give these a shot.
Pics taken with my Nexus 4:
smooth3d said:
Anybody who is interested in the Bear motion cases from Amazon:
http://www.amazon.com/gp/product/B00BVWJ94E/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
These are very nice thin and light hard case that will give light protection for your phone while still being stylish. My two case came in the the other day (Black/Gray). I have not receive my One yet but the cases feel real nice in the hand. So if you are looking for a thin and light case, give these a shot.
Click to expand...
Click to collapse
Hey smooth,
Thanks for the pics - are these textured on the inside? It seems they could cause scratching to the back and sides on the phone while being shifted around.
D3luSi0n4L said:
Hey smooth,
Thanks for the pics - are these textured on the inside? It seems they could cause scratching to the back and sides on the phone while being shifted around.
Click to expand...
Click to collapse
Yes they have the same finish as the outside. It's hard to explain but it feels really smooth so I doubt its going the scratch the phone.
It actually feels a bit smoother on the inside. It's barely discernible, but it's there. My fingertips are well tuned, thanks to my woodworking.
It's a fantastic case, but offers almost zero screen protection. If that works for you, $6 from Amazon (US) can't be beat.
smooth3d said:
Yes they have the same finish as the outside. It's hard to explain but it feels really smooth so I doubt its going the scratch the phone.
Click to expand...
Click to collapse
CocheseUGA said:
It actually feels a bit smoother on the inside. It's barely discernible, but it's there. My fingertips are well tuned, thanks to my woodworking.
It's a fantastic case, but offers almost zero screen protection. If that works for you, $6 from Amazon (US) can't be beat.
Click to expand...
Click to collapse
Appreciate the responses, may have to pick one up.
Picked up a green one for 5.99 with Prime shipping. I like it a lot, the texture is real nice, and it is a real tight fit so I dont think it will be moving around in the case, I have taken it on and off a lot in order to show people my nice aluminum phone., and have yet to notice any scratches though you do have to be careful taking it out of the case, as I said it is a tight fit. But Overall I really like the case, it really does offer almost 0 protection. It looks nice and feels nice. My one issue with the volume buttons are a bit difficult to press with it on and it kinda feels like it is something I could make if I had a 3d printer, very thin. Someone who is looking for a real protective case can look elswhere, this is almost all about style.
I just got my phone and this is how it look like in the black case:
Sorry for the poor lighting!
Very nice! I just ordered the gray one from amazon because my poetic borderline case is taking forever to ship. Hopefully this case will give just the right amount of protection.
Sent from my HTC One using xda app-developers app
I ordered some myself the other day. Even though they haven't arrived yet, they look very similar to the ROCK Quicksand cases they made for the Galaxy S3, and HOX. I'm just not digging their logo on the back... I'll probably remove it somehow.
bought the blue one. coming in on monday
great thin case
I really like this case. The texture is superb and sublime. Just enough to barely feel. There are just a couple of things that could be improved to make this case perfect for me.
1) The lip at the corners is slighly recessed and the corners should wrap around the phone a bit more. Almost every time I drop a phone it lands on a corner and with this case it's possible the aluminum could take the impact.
2) Lose the SIM tray cutout.
3) I'd feel better about putting the phone face down if the lip was just a half millimeter higher.
4) Power button cutout isn't quite cutout enough. It should be like the usb cutout which is perfect.
5) Volume cutout is just a bit 'sharp'. I wish the edges were smoothed a bit.
That said, these are nitpicky items and more like suggestions I guess. I would endorse this product.
Galaxy S4 cases
New to the forum. Anyone has suggestions regarding cases for Galaxy S4? There are so many choices out there. Just got confused easily.
I used to have a Bear Motion wallet case for my note and loved it. They seem to have the same wallet case available for S4.
But, I really want to have something simpler this time around. Any suggestions for a snap on case?
Same quality and fitment as Incipio and Spigen @ only $5.99... You can't beat em!
I have the Bear Motion case in grey, and yes, it's definitely a nicely fitted, slim, grippy case. However, the rubbery texture DOES begin to wear off with time. The coating on the edges on the front corners of the case have begun to wear off, revealing grey plastic underneath. Fortunately, it does blend fairly well so it isn't much of an eyesore. Hopefully you'll be able to see what I mean from the attached picture.
Hi folks,
Just received my Draco Design bumper. I will say it looks very nice in person and the side buttons and top button feel nice
1 problem though --
The back bumper is not tall enough... due to the curve of the HTC One, it has 0 lay on the table design, and 0 drop protection!
The curve of the phone is taller than the bumper causing the phone to touch any surface it lays on. In short...this case serves no purpose.
Buyer Beware
Wow... If it was for me i'd have sent it back and get my money. definately doesn't worth 70 bucks without a purpose
I have the HTC One Silver and installed the Draco One black bumper.
For better protection and peace of mind, I put an invisible shield kind of protection for the back and sides of the HTC One. Then I installed the Draco One Case.
I also use a pouch for final protection.
http://forum.xda-developers.com/showthread.php?p=41292226#post41292226
The idea of AL being used as a bumper instead of plastic/rubber also blows my mind. I would hope that you could return that case as it is extremely pricey for something that isn't doing it's job.
Actually I already knew that the Draco bumper won't protect much at the back because I had tested the dummy HTC One and noticed the back was curved, especially around the camera lens.
I agree the design could have been improved because the guys at Draco must have tested the bumper with a dummy model.
Anyway I will make do with the Draco Bumper until another better aluminum bumper releases.
The aluminum bumper gives a different look to the HTC One.
Yeah I'm definitely gonna be returning it. I noticed their website states only unopened items, but we shall see!
Hopefully they will adjust the back bumper to sit just a few mm higher and alleviate these issues.
I will contact the dealer in Hong Kong and see what they have to say. These bumpers are made in China anyway. May be they can get a quicker response.
May I ask whether the volume key is working properly
ysc0423 said:
May I ask whether the volume key is working properly
Click to expand...
Click to collapse
You need to make sure the volume buttons are set properly in the bumper. Initially I was having difficulty pressing the buttons but after setting the volume buttons properly, it became easier to press.
Sucks I was looking to get one. I'm waiting for dbrand to perfect their skins for the One, then I'm gonna get an aluminum bumper similar to this and have an Iron Man design on the back.
i have a feeling that this will be the case for most bumpers, because of the curve. however, wouldnt say that it offers 0 protection. ive been going commando with my One since i got it, today i dropped it on its corner and put a small dent in it. now, i could have avoided that if i had a bumper like this.
Judging by your second photo, at least it has a considerable 'lip' on the front side of the device which is great if you're like me and leave you One screen down on the desk.
GonzoDuke said:
Judging by your second photo, at least it has a considerable 'lip' on the front side of the device which is great if you're like me and leave you One screen down on the desk.
Click to expand...
Click to collapse
Yup, laying it down on its face is perfectly fine. I really do like the look of the thing in person, I'm just hoping they machine a Version 2 that extends the back side out a bit. Could also keep the case the same, but machine slight ridges on all 4 corners of the backside that extend just slightly more.
I'd use it if I didn't see the issues regarding the One's camera hole cracking/scratching and case denting as much as it does.
How long did it take to delivery the case to your location?
azalex86 said:
Hi folks,
Just received my Draco Design bumper. I will say it looks very nice in person and the side buttons and top button feel nice
1 problem though --
The back bumper is not tall enough... due to the curve of the HTC One, it has 0 lay on the table design, and 0 drop protection!
The curve of the phone is taller than the bumper causing the phone to touch any surface it lays on. In short...this case serves no purpose.
Buyer Beware
Click to expand...
Click to collapse
would you of rather make the case an inch thick and protect the phone? what did you think it was going to be with the curve of the one. i have some tape and packing over here it you want to secure your phone. If they made it cover the whole phone i imagine we would be reading a review of how tall it was
hugebulge said:
would you of rather make the case an inch thick and protect the phone? what did you think it was going to be with the curve of the one. i have some tape and packing over here it you want to secure your phone. If they made it cover the whole phone i imagine we would be reading a review of how tall it was
Click to expand...
Click to collapse
All they needed to add was literally a 2mm bump on each of the 4 corners. Wouldn't even be noticeable. Other bumper companies have done this sort of thing for quite a while now, I can't believe it was such a huge oversight by Draco.
On the case delivery, took about 4 days from order to receiving in AZ
I ordered one already and will apply a skin on the back to add more protection to it. It would be enough I think
azalex86 said:
All they needed to add was literally a 2mm bump on each of the 4 corners. Wouldn't even be noticeable. Other bumper companies have done this sort of thing for quite a while now, I can't believe it was such a huge oversight by Draco.
On the case delivery, took about 4 days from order to receiving in AZ
Click to expand...
Click to collapse
Did the case dent your phone?
AirSupply said:
Did the case dent your phone?
Click to expand...
Click to collapse
Nope, no dents -- only kept the case on for about an hour to test out signal strength/gps loss, etc. Would be a fantastic case if not for this little bit of "duhhh."
If you're going to use this case make sure to get a protector for the back like some have suggested. Also know that because of the low profile camera bumper lining on the HTC One, if dropped on it's back, you may get a broken lens in addition to the dent in the aluminum.
MCube74 said:
I have the HTC One Silver and installed the Draco One black bumper.
For better protection and peace of mind, I put an invisible shield kind of protection for the back and sides of the HTC One. Then I installed the Draco One Case.
I also use a pouch for final protection.
http://forum.xda-developers.com/showthread.php?p=41292226#post41292226
Click to expand...
Click to collapse
can you tell me does the case affects the signal?
Bought this case new from ebay knowing about its few problems being reported like the proximity sensor, call problems, and audio issues, but still preferred this over the lifeproof simply for its protection. When i first received it, my initial reaction was "wow, its here, and its HUGE!" But i carefully disassembled it and clean it out just in case, water tested it (passed), dried it off, and finally put my phone in its new suit of armor. It really made the phone huge, and i mean huge, but i honestly dont mind the added bulk because of its substantial protection and it still feels very comfy in hand and doesnt hinder the phones functionality at all. Speaker for music also plays very loudly and crystal clear unlike other reviewers have stated. I think its a great case to buy and kind of essential if you have a very physically active life. Now to the cons (although their aren't many): Unlike many other reviewers of the white version have stated, i dont have call proximity issues, only thing that happens related to proximity is when i turn the phone over to face down while playing music, it pauses, but thats expected because i had that motion option enabled. Next, phone calls work fine and i hear people just fine, but the caller on the other end may have a problem hearing you sometimes. But it rarely happens and most times they can hear you. Easy fixes are bluetooth and earphones. Lastly, the home button definitely requires more pressure to press and the menu/back "buttons" are a little harder to get to but you'll get used to it. Thats the only thing "wrong" with this case honestly and its still excellent to have. I would highly recommend it. If you dont mind a little bulk, get it. Again, great great case :good:
I have a brand new one in original packaging from otterbox if anyone wants, contact me through dm or 6785162209
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing. There are many surface scratches on the screen which you can only see if you look at it while the screen is off under a super, super bright light. Doesn't affect the image quality at all. Outside frame (the gray part) is a little cracked in few places. Not a big deal.
Runs flawless on CM 10.2.1. Undervolted almost 100mV across the board.
I used to be OCD, but decided to save my health instead.
Aftcomet said:
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing.
Click to expand...
Click to collapse
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
bogdaryl said:
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
Click to expand...
Click to collapse
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
aybarrap1 said:
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Fair enough. I suppose we don't always have ideal circumstances to our liking.
NexusS4gFreak said:
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
Aftcomet said:
Fair enough. I suppose we don't always have ideal circumstances to our liking.
Click to expand...
Click to collapse
LOL...I love my phone being slim and I can live with scratches. But after a few near misses with my toddler son and getting soaked a couple of times on the job, I decided I would have to give in. Bring without my phone even for a day would screw up my schedule. Amazing how much I depend on it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
D00ky said:
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
Click to expand...
Click to collapse
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
For everyday protection sure it may be good, but when it comes to 10ft drop, water, being hit, stomped on, and numerous other things, the armor case is the best.
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
NexusS4gFreak said:
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
Click to expand...
Click to collapse
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
D00ky said:
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
Click to expand...
Click to collapse
I finally got 2mm foam as 1mm is hard to get. 2mm foam goes into gaps between ribs on the rubber on the back cover of the case. So this just might do the trick as the case closes ok.
The for the review, I have an Otterbox Defender and love it to death, but I've been thinking of buying one of these.
i have the Acase Superleggera Pro Dual Protection Case on my S3 and it is great!
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
DMF1977 said:
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
Click to expand...
Click to collapse
Not sure but I think that there's no fakes around. Enjoy it.
D00ky said:
Not sure but I think that there's no fakes around. Enjoy it.
Click to expand...
Click to collapse
Thanks!! But I'm sure there are plenty of fakes around...
When I ordered my official Google Nexus 5 Bumper in Red I was more than excited to have an official case I knew I wouldn't have any problems with.
Upon opening I loved it. The red bumper on my Nexus 5 looked fantastic! I was thrilled that I was going to be carrying it around now.
First:
It fits perfectly with the buttons on the sides as well as cutouts for speakers and buttons. There's no doubt about it, although the buttons may be a a little harder to push at first, due to the case's button popouts being rigid, you can quickly get used to this and it isn't a real problem. The cutout for the speakers don't seem to limit the sound at all, so that was all good. And the cutout for the charging port fits most chargers without any issue. I only had an issue with one of my cables that has a huge plastic piece around the micro USB metal piece, but it wasn't made for the Nexus 5 so it doesn't really affect my opinion of the cutout. Plus it works with wireless charging, so that's a plus. The cutout for the headphone jack fit all my headphones perfectly, even ones with the L-shaped jack, so I was happy with that as well.
Other than that, I loved the relatively slim design of the case as well as the nexus logo on the back. I can noticeably feel the case's added width when I take it off, but it isn't a huge difference like many other cases may add. So it keeps the device still relatively slim.
BUT I WAS DISAPPOINTED after I put it on and started assessing the actual fit. I thought it would be a harder material. Although it "snapped" on perfectly, the case was loose around the top and bottom.
On the top:
The case could be pushed in, to where it would make a sound from rubbing on the Nexus 5. I adjusted the case and put it on again but nothing. It almost felt like the cheaper silicon cases bought for devices that eventually warp and don't fit properly. This is extremely annoying (at least for me) because I expected the case to be a perfect fit on the top and bottom without me being able to push parts of the case and have them move, or make a rubbing sound.
On the bottom:
The same thing occurred. The small piece of rubber above the charging port (closest to screen) is very flimsy. I noticed wear from two days of use. This involved taking it out and putting it in my pocket. My pants aren't tight so it wasn't a squeeze. It came from me grabbing the case right above this small piece of rubber and pulling it out. As with the top, I can push this piece of rubber pretty easily and have it move in and out (or up and down, however you want to say it). It seems it will continue to get looser until it is warped a bit.
Overall:
I was disappointed with the case. I contacted Google and as per their return policy they offered a refund without returning or swapping the case. The top and bottom "mis"-fits really killed the excitement for the case. With the top being able to be pushed in AND making a rubbing sound, it irritated the crap out of me. And with the bottom rubber piece over the charging port being flimsy and possibly warping JUST from everyday use of the case, I can't love the case like I wanted.
Last thing:
Anyone else have this issue? Or any other issues? When I read and watched multiple reviews, none of them seemed to show all of the bad things I found with my case. So part of me thinks it may be just mine. I am considering ordering another with the refund offer but I am hesitant to spend money on another and have the same results.
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
same here. it works perfectly with my phone too. no loose top or bottom areas here. i don't know about slim but it is handy and gives a good grip. also the charging point rubber you talked about? for me it's a bit tight fit for the charging pin but it just gives way when pushed with a bit of presssure and comes back when pin is removed. otherwise no problems for me with this case and i'm pretty satisfied.
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Where did you get it ?
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
wolfen69 said:
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
Click to expand...
Click to collapse
Are they really the same quality ? And if they are would you post a link too ?
Vanilla Pudding said:
Are they really the same quality ? And if they are would you post a link too ?
Click to expand...
Click to collapse
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
wolfen69 said:
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
Click to expand...
Click to collapse
Can I buy from eBay with something other than PayPal ?
Vanilla Pudding said:
Can I buy from eBay with something other than PayPal ?
Click to expand...
Click to collapse
Do you want me to hold your hand? Figure it out.
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
ToZoX said:
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
Click to expand...
Click to collapse
I haven't received them yet. Will let you know as soon as I get them. Shipping from China takes a while.
I got a red one about 3 weeks ago.
It started peeling (sort of) at the corners within 10 days, black material was showing up.
Upon removing the case, I discovered that it left long marks on the rubbery back of the black Nexus 5, along the ridges of the bumper.
Thats when I decided to sell it off.
Simply put, it looks awesome, fits awesome, but as a product, its bad, and not at all worth the money.
Atleast those marks are slowly dissappearing (Trust me, those arent dust or something)
I was asked to write a review on XDA Developers, to enable me to receive my case for free, so here I am. If this isn't allowed here, I'm just doing as the company asked. Feel free to delete.
Took Exactly 20 days to arrive, As Jeff said in his email to me (co-founder of ArmadilloTek), I had an option to either buy from Amazon or get sent from manufacturer. I chose the manufacturer (Amazon was out of stock)
Arrived bang on schedule! - If i had ordered from Amazon, had they been in stock, it would have most likely been next/same day.
This is my review after a few days of use, replacing my OnePlus Case
Pros:
- It's very thick. It doesn't make my phone feel too big, but it does make it very pleasant to hold
- Feels very nice to hold - unlike my OnePlus Case that came in the box, it doesn't feel like it is going to fall out of my hand at any point
- Retains clicky buttons on the phone, some cases make the buttons feel mushy - this one does not!
- Very, very clear! Get a nice view of my totally black phone through the case!
- Works better than my OnePlus case for NFC (I'm a diabetic with NFC monitoring sensors) - This one is IMPORTANT to me.
- NO STUPID SANDED CORNERS. So many TPU cases have textured corners. It annoys me - this case doesn't!
Cons:
- Bit of a fingerprint magnet. For someone like me that likes a clean look, I have to pretty frequently wipe the case down - I know it's a clear case, so fingerprints are not as visible, but I still see them!
- Occasionally a corner of my phone slips out of the case. One example I threw my phone (lightly) onto my bed. When I picked it back up, a corner had come out of the case. The case does feel snug though, so that shouldn't be happening but it isn't the first time I've spotted it. I wouldn't want that to happen if I do actually drop my phone somewhere a case matters.
- Doesn't stick well with the set of pop sockets I have - I feel it's a requirement for large phones to make them useable. Mine doesn't seem to stick super well to this case. Could be isolated to me though.
Packaging:
-Pros
- Arrived in good condition
- Professional Packaging
- Easy to Open
-Cons
- Could use less plastic. You could get away with a paper bag or something. It's already in a box, and the case is thick plastic, I highly doubt it's getting damaged in shipping when the box didn't even have a dent - and I live in the UK, getting it shipped from America.
- It wouldn't hurt to include a free, decent glass screen protector. I see a bunch of cases doing this on Amazon. Not saying it's a requirement, would just be nice.
Rating: 4/5
@jinshanghaiaraol you seem to have something to do with this, can you pass this on?
manor7777 said:
@jinshanghaiaraol you seem to have something to do with this, can you pass this on?
Click to expand...
Click to collapse
Thanks man.
I passed your review to the company.
Don't agree with most thing you talked about package. We have to keep the product sealed perfectly or Amazon might say it is not good enough.
And about the magnet of fingerprint, dude, you are using a clear case, it happens to all of them.
jinshanghaiaraol said:
Thanks man.
I passed your review to the company.
Don't agree with most thing you talked about package. We have to keep the product sealed perfectly or Amazon might say it is not good enough.
And about the magnet of fingerprint, dude, you are using a clear case, it happens to all of them.
Click to expand...
Click to collapse
actually the clear case i had for my OP8 Pro wasn't anywhere near as noticeable for fingerprints, but it did have a textured back - just personal opinion! - Fair enough for the packaging though, i don't sell on amazon so i don't know their requirements Love it so far though
Hi guys, I was also asked by Jeff Lin (ArmadilloTek's co-founder) to try the brand new CaseBorn ArmadilloTek S for One+ 9 Pro.
As for me phone protection is very important (my friends call me paranoiac !) I am always very interested in cases but often disappointed.
When I unboxed it, apart that the packaging is perfect and graphically totally my taste, I was a bit disappointed because this case looks really not strong nor special at first glance. And that is the amazing point! This case is greaaaaaaaat but does not let it be seen immediately.
The material is rigid, except in the upper corner of the camera window where it is completely flexible, but being rigid it keeps a certain flexibility as you can see on the pics.
It is not that thick but it is definitely strong, and to break it you'll need to really want it. So I don't feel my phone is bigger but I feel it is protected and very pleasant to touch and to hold in my hand.
I can hold it quite better than without case or with the OnePlus case, and it won't slide off my hand as it might happen with the one+ case coming with the phone or without case.
It is totally clear and transparent and works perfectly with NFC. Not too much fingerprint smudging.
The buttons work perfectly and are totally protected.
The edges of the screen are very well protected without disturbing the touch.
So for me guys no doubt, this is THE case. I threw in the trash can the oneplus case and I think they should work together with Armadillo Tek because even if it was nice from oneplus to provide a case for free, after 3 minutes using the Amadillo's one I don't consider anymore the oneplus case as an effective protection.
Sorry guys I tried my best but I did not find any drawbacks or bad points to this product, not even it soft price ...
Just one thing more to add: Thanks and bravo Armadillo Tek for this case that make my phone and I HAPPY!
I have this case as well and the only negative I'd the gigantic logo on the back. It might not be gigantic to some but it's my opinion. I'd prefer a small, matte company logo over "Caseborne ArmadilloTek". It just seems like a lot for a case.
Other than the branding I really like the case. Provides a great grip for a slick phone and still let's you see the phone itself.
Buttons are still clicky and it has a solid lip around the display to protect it from debris if it's dropped. Has good cut outs for the USB-C port and mics around the phone
BillyxAllen said:
I have this case as well and the only negative I'd the gigantic logo on the back. It might not be gigantic to some but it's my opinion. I'd prefer a small, matte company logo over "Caseborne ArmadilloTek". It just seems like a lot for a case.
Other than the branding I really like the case. Provides a great grip for a slick phone and still let's you see the phone itself.
Buttons are still clicky and it has a solid lip around the display to protect it from debris if it's dropped. Has good cut outs for the USB-C port and mics around the phone
Click to expand...
Click to collapse
Love their products and the owners