Related
I tried to use the previous version of kies to upgrade my gs2 but it never worked. Update would be from:
[KF3/phone:ke7/csc:KD1] to [KI4/phone:KI1/csc:kh2]
Which I'm sure is a big step forward as I haven't been able to update forever. I thought that once I updated Kies I'd finally be able to update my phone. Now when I connect my s2 and hit update firmware, as soon as it asks to backup it loses the connection to the s2. I've reinstalled drivers twice to no avail.
Does Kies just blow as a software or am I doing something wrong.
Kies blows big time - utterly useless... useless at upgrading, useless at backing up. According to their twitter @samsungkies - "Seamless experience with Smarter Kies". That's a joke of a statement. Go with Odin my friend, much less aggro and it works all the time.
^ I so much agree to that post.
Kies never worked for me, not even when my SGS II was used with the stock rom that shipped with it. While there was an update out for quite a long time (> 1 month) it still was showing my version as being current.
Odin is so much better or just as simple: flashing from CWM.
husaam said:
Kies blows big time - utterly useless... useless at upgrading, useless at backing up. According to their twitter @samsungkies - "Seamless experience with Smarter Kies". That's a joke of a statement. Go with Odin my friend, much less aggro and it works all the time.
Click to expand...
Click to collapse
I briefly looked at Odin not too long ago, it looked sort of confusing. I'm in another country currently and spend most of my time either (50+ hours a week) working on projects here or exploring the country. As such I don't have much time to learn a new program if it's too confusing. But I'll give it a try and hopefully get to say goodbye to kies forever.
edit: Do I need to root* my s2 to use odin?
aDroidtoRemember said:
I briefly looked at Odin not too long ago, it looked sort of confusing. I'm in another country currently and spend most of my time either (50+ hours a week) working on projects here or exploring the country. As such I don't have much time to learn a new program if it's too confusing. But I'll give it a try and hopefully get to say goodbye to kies forever.
Click to expand...
Click to collapse
It's actually quite simply. Most ROMS come with only one file. That can be flashed via PDA. Do NOT, I repeat, do NOT, I repeat once again, do NOT, and again: do NOT! tick ANY option in ODIN, unless stated specifically in the ROM's instructions and even then tripple check that you're really about to flash a SGS II firmware.
So as long as you get the right firmware, do not tick anything and just flash it via PDA you should be quite safe. There's always a minimal risk, even if you do everything right but it's very very small.
Try This!
RUN Kies onces its loaded connect phone it will say connecting phone within a short period of time and error message will load, click onto the error message a new window will open, now it will have something like 4 stages. 1st stage will say disconnect cable from phone, once you have done this click on next or the follow up stage. Now this will or should Repair drivers, and now install drivers again once this has been done connect phone and phone will now load in Kies.
XP users may have to reboot PC for driver take effect.
Hope this hepls you.
PS:THIS problem only happen to me on live update, download new kies manually install no problems. Win 7 64bit
Looking at Odin for the first time can be a bit confusing. Once you know the score tho its very easy and quick. Flashing intras files for example is a complete doddle as it's 1 tar file
Sent from my GT-I9100 using xda premium
Nyssa1104 said:
RUN Kies onces its loaded connect phone it will say connecting phone within a short period of time and error message will load, click onto the error message a new window will open, now it will have something like 4 stages. 1st stage will say disconnect cable from phone, once you have done this click on next or the follow up stage. Now this will or should Repair drivers, and now install drivers again once this has been done connect phone and phone will now load in Kies.
XP users may have to reboot PC for driver take effect.
Hope this hepls you.
PS:THIS problem only happen to me on live update, download new kies manually install no problems. Win 7 64bit
Click to expand...
Click to collapse
I've reinstalled the drivers using the connection error troubleshoot, and the phone connects fine to kies. It just loses connection to kies when I try to update the firmware. When I have more time I will most likely just use Odin but I don't want to root my phone in order to do it. Is rooting necessary?
Once you get your head around Odin, its a piece of cake.
Look for Intratech's Official i9100 Firmwares thread in the Original Android Development section, you'll find everything you could possibly need in there (instructions, firmwares etc)
aDroidtoRemember said:
I've reinstalled the drivers using the connection error troubleshoot, and the phone connects fine to kies. It just loses connection to kies when I try to update the firmware. When I have more time I will most likely just use Odin but I don't want to root my phone in order to do it. Is rooting necessary?
Click to expand...
Click to collapse
OK Odin is easy just read the Q&A
link pls...
i just upgraded to 2.1 also and now can't upgrade firmware, just keeps looping in disconnecting and reconnecting never upgrading firmware
Since nobody answered yet... No u don't needa root to get Odin work
Sent from my GT-I9100 using Tapatalk
i have had the same connect - disconnect or backup problems with kies (my version is 2.0.3) and have always blamed it on kies but once i tried to restart the phone, everything worked smoothly and i could do all kinds of operations with it. My phone is rooted and the current fw version is XWKJ1 original.
Sent from my GT-I9100 using XDA App
mertakb said:
i have had the same connect - disconnect or backup problems with kies (my version is 2.0.3) and have always blamed it on kies but once i tried to restart the phone, everything worked smoothly and i could do all kinds of operations with it. My phone is rooted and the current fw version is XWKJ1 original.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
you're are correct for 2.0.3 but the new 2.1 is totally screwed up, crashed my windows even
Gavin.csy said:
i just upgraded to 2.1 also and now can't upgrade firmware, just keeps looping in disconnecting and reconnecting never upgrading firmware
Click to expand...
Click to collapse
Just read a solution that works for me on the Dutch tweakers.net website:
- In Windows fully uninstall Kies.
- Download the latest Kies version and reinstall.
After that the upgrade worked for me.
janderk said:
Just read a solution that works for me on the Dutch tweakers.net website:
- In Windows fully uninstall Kies.
- Download the latest Kies version and reinstall.
After that the upgrade worked for me.
Click to expand...
Click to collapse
do you have the link for the download, i still find 2.0.3 only, nothing directly 2.1
Windows 7pro (32bit) absolutely none of the problems listed here or on other threads (regardless of stock/custom anything) but.. Odin is easy if you follow instructions and seems much more reliable (see intratechs thread in dev section for instructions)
Sent from my GT-I9100 using xda premium
It finally worked for me, i don't know what happened why it suddenly decided to work/
One difference i noticed is i got a notification 'Samsung Modem succesfully installed' which i did not get for the past 2 hours of restarting,uninstalling ,installing. It just suddenly came when i connected the phone
Kies is really crazy as hell
I think you may just have to turn off your anti-virus/firewall software while you update. It worked for me.
I have an epic sitting at home that is useless as of right now because I no longer have a plan through sprint for it. I have a samsung replenish that I am using right now with Boost, and I am considering making it a donor phone and flashing the Epic over to Boost. Having this little thing really makes me realize just how awsome those Super AMOLED displays are. Anyway, I have a few questions before getting neck deep in this little endevour. First off, I don't want to be stuck on Eclair, but as I understand a Factory reset is necessary to get the 3G working, I read that people were abale to flash to Froyo using a few tricks, I was just wondering if the same works for Gingerbread. If anyone is running a Boost Epic on GB I would like to know how it is working out. Also, once the phone is flashed to said version of Android, can I just flash any rom on top of it through CMW without having to make tweaks?
And finally, I can not get either the Replenish or the Epic to read on CDMA Workshop, I have tried debug, non-debug, and diag modes and any combination, I have tried reading the phones in recovery mode, I have rebooted, restarted, unplugged, switched cables and ports....nothing...the phones both show up as modems and have their ports listed in device manager, but they absolutely refuse to show up, if anyone has any tricks that they could share regarding this issue it would be much oblidged
I know it's a lot but I figured I would try and cover all of my questions in one thread rather than making a bunch of seperate ones. BTW I have been researching for 2 days now, if there is something obvious that I missed, I apologize in advance, but I have tried other methods of resolution before creating this thread...Thanks in advance for any advice that you guys can offer...
We have a guide on here did you consult that? And I know that there is an alternative carrier fix for cm9 so you "could" get that puppy on android 4.0 =]. As for the computer not detecting... did you install the mobile drivers for the phones? I think you might need to if you haven't. I know when odining you need those I suppose the same for cdma workshop. Hope this helps at all =]. if you need the guide ill link it here.
Flashing Epic 4g to Boost Mobile Guide.
In this guide he is using the incognito but as long as you have a cdma phone to use as a donor phone you should be fine. If you havnet installed the drivers for either phones then this is most likely your issue. Also according to the guide you CAN flash other ROMs. The only thing that needs to be tweaked is the sms settings.
Yeah, I have looked at the guide, I was hoping to clarify on the few items that I wasn't clear on. I have installed the drivers for both phones and Odin does infact recognize each one, I use it to verify the Com ports that the phones are on...i'm baffled :/
After hours more of trying...and researching..I still can not get past the initial step of getting cdma to read my phones...either of them. Is there a section on this forum for requesting services? I dont care if I have to pay to get it done, I want my epic on boost...
bugzy3188 said:
After hours more of trying...and researching..I still can not get past the initial step of getting cdma to read my phones...either of them. Is there a section on this forum for requesting services? I dont care if I have to pay to get it done, I want my epic on boost...
Click to expand...
Click to collapse
I doubt it... but who knows. I dont see why they wont detect. They should if you have the drivers installed... maybe try just having one of the phones drivers installed at once... which ever phone you have to start off with have that phones drivers installed only. so unistall both then install just one that you need then unistall that one when the other one needs to be used... and you might want to reboot in between driver installations. drivers can be very picky. Or you could try another computer...
I'll give it a shot, its something new at least...I will post my results when I am done..
bugzy3188 said:
I'll give it a shot, its something new at least...I will post my results when I am done..
Click to expand...
Click to collapse
I know some having success doing this because they had their epic touch and epic 4g drivers installed once they unistalled both and just installed the epic 4g the computer would recognize it.
tried uninstalling all samsung mobile drivers and installing the drivers for each phone by themselves, still nothing...I am downloading a new set of drivers now, they are generic Samsung mobile drivers.I'm not expecting much but its all I got at this point...
bugzy3188 said:
tried uninstalling all samsung mobile drivers and installing the drivers for each phone by themselves, still nothing...I am downloading a new set of drivers now, they are generic Samsung mobile drivers.I'm not expecting much but its all I got at this point...
Click to expand...
Click to collapse
HMM i know which samsung drivers work great for the epic but i think you need device specific drivers for the replenish.
32 and 64 bit Drivers I know the drivers here work great and i have used them with every epic i've rooted... I just learned that the drivers im linking you to work for the replenish .
awesome, I am trying them as we speak...
ah crap, those were the same drivers that I downloaded for the Replenish, still a no go...the fact that neither phone works would tell me its on the PC end, and drivers would be the number one suspect, but alas...they just aren't making a difference in my results..
bugzy3188 said:
ah crap, those were the same drivers that I downloaded for the Replenish, still a no go...the fact that neither phone works would tell me its on the PC end, and drivers would be the number one suspect, but alas...they just aren't making a difference in my results..
Click to expand...
Click to collapse
Yeah you might need to try another computer. The usb ports could be bad/out on that one depending on how old it is. Or it could be the usb cable as well you'd be amazed at how much trouble is cause by those. Have you tried a brand new blackberry cable? those are the best cables at getting things recognized. What i dont get is that odin will COM the phone.... and this is in download mode right?
no, it coms both phones in debug mode, I have a few blackberry cables lying around that I have picked up on Amazon that I bought for Odin. Thats what kind of has me scratching my head too. It is an older laptop though, Id say about 4 years old, running windows 7 x64...I have checked QPCT as well just to see if it recognizes the phones and it doesnt either, so I guess it's some issue with my com port's compatibility with the mobile phone software....I will see if I can get away with doing this at work tomorrow, it may be tricky but my boss is old and senile lol
Well I tried it at work with no luck yet, which just leaves human error in to play...not sure what though, I've covered all of the options that I have come across. The replenish I could understand, but the Epic is documented to work just fine with CMDA WS...I just don't get it...
A couple things to try...
1. Connect the phone in normal mode (so it asks mass storage, etc) and let the drivers install.
2. Unplug, turn on USB debugging (Settings -> applictaions -> Development), plug the phone in and let it install ADB driver
3. With phone plugged in switch to dialer and hit ##8778#, then switch USB from PDA to Modem. Your PC should install another driver (Diag port).
Make sure you leave the Epic on this screen while accessing it via CDMAWS or any other program that uses the diag port.
I had major issues with the Epic, but that sequence finally got everything working. I still need to plug the phone in before enabling the diag port, otherwise stupid things happen.
This was all with an XP computer (three actually, before I figured out all the correct steps).
Thanks, I'll try that when I get home, I actually haven't tried putting it in diag mode while plugged in yet, I have always put it in diag and connected it...heres hoping..
ok, I finally got the replenish to connect, I found a way to root it and that worked like a charm....the epic however is still a no go...rooted running CWM 5, in diag mode, switched to modem, recognized as a modem....but still..failed...phone does not answer...any other suggestions guys?
Needs download mode not diag mode whatever that is... hold the 1 on the keyboard and the power button (yellow triangle) make sure is not in modem mode and you must flash the kernel from mkasick for ei22 search in xda "epic 4g gb kernel source" should me the first thread (ei22) kernel source with keyfix. Scroll to the bottom and find the gb3a.tar this is what you odin before cwm5 and it should stick. Then you can flash an su.zip and your done.
Sent from my SPH-D700 using xda premium
ÜBER™ said:
Needs download mode not diag mode whatever that is... hold the 1 on the keyboard and the power button (yellow triangle) make sure is not in modem mode and you must flash the kernel from mkasick for ei22 search in xda "epic 4g gb kernel source" should me the first thread (ei22) kernel source with keyfix. Scroll to the bottom and find the gb3a.tar this is what you odin before cwm5 and it should stick. Then you can flash an su.zip and your done.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I was on EL30, which from my understanding worked as well. I flashed the gb3a and I am rooted with CWM and I installed SU, I just still can't get cdmaws to see the phone...I tried fix permissions, in CWM, not even sure what that does, but I tried it...i'm desperate lol. I have tried tether mode, switching ports, attempting while in recovery, and I get nadda....EL30 was what I had factory reset to, are you saying that I should flash back to ei22 for cdma or were you saying to do that to get it rooted?
No my appologies I, just read you rooted correctly. I'm not sure why it refuses to recognize the epic. Other than a better cable, or different usb port. I dunno. That or there is gunk in the epics usb port or in the computers. Should be in modem mode I'm assuming if your messing with the phoney. Stuff ='[ sorry.
Sent from my SPH-D700 using xda premium
I have upgraded to an S3 from having a Vibrant for years. I rooted and flashed several OS's to my Vibrant in those years without an issue ever. I have been trying to get files transferred to my S3 from my computer for 2 weeks now. The computer has the drivers installed correctly. It is recognized by name when I plug it in (it comes up as SGH-T999, Kies will recognize it too). whenever i try to transfer ANYTHING it stops in the middle of the transfer. just sits there with no further progress to be achieved. This is insanely frustrating. I am unable to root this thing because of the inability to actually transfer.
Things I have tried:
Uninstalling/reinstalling Kies multiple times
Uninstalling all USB device drivers multiple times
Reinstalling drivers through Kies and through Samsung's website multiple times
Factory reset on the phone multiple times (****ing aggravating btw)
Using my old Vibrant cable
Changing between MTP and camera mode... several times
Yelling at it
I have been trying to research how to fix this garbage for weeks now. there is no concrete way to remedy this problem that i have found. every thread about this is littered with the usual "uninstall your driver and reinstall it" nonsense that is the most generic response to anything tech related ever.
What I can tell you is that my phone is definitely getting recognized by anything that can do so. Odin, Kies, My computer, etc etc... it appears that the issue lies in the actual data transfer. As I mentioned, transfers initiate but will lock up mid-process and just hang there infinitely. Same goes with Odin when I try to get it to flash into CWM recovery.
Please, help. any time spent trying to fix this issue is greatly appreciated.
Are you uding the usb cable thst came with the phone?
Have you tried different cables? Or on another computer?
Im guessing your not rooted then?
Try installing the drivers ONLY. get them here:
http://forum.xda-developers.com/showthread.php?t=1728605
Uninstall previous versions of everything first.
What version odin are you using? Use 3.07 from above post if you're not already.
Also try this app
http://forum.xda-developers.com/showthread.php?t=1711009
If you are rooted try SwiFTP or another wireless transfer app.
Sorry to mention drivers again but if you're relying on kies to do that for you it could be the issue.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Sorry I missed the part where you mentioned drivers and cable. Damn choppy xda app!
Sent from my SGH-T999 using xda app-developers app
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Sent from my SGH-T999 using xda app-developers app
I recommend an app called airdroid. I had issues transferring stuff to and from my Mac and haven't had any problems since I started using the program. Besides it's wireless so I don't have to worry about the wires being a problem
psykhotic said:
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
Click to expand...
Click to collapse
everything else works fine from my 6 USB ports (2 USB 3.0 ports as well). The tool kit solution still needs Odin to root. The problem is not detecting the device. it is the transferring of data. Data transfers begin but that's about it. Odin gets to "firmware update start" and then "boot.img" and just hangs there forever. no change. nothing else.
Is there a wireless way to do this? I have purchased Rom Manager but since i can't achieve root it is just useless now. The phone is brand new from the Tmobile store. Not once has it been dropped (to put into perspective how careful i am with my devices, I managed to drop my Vibrant once in ~3 years, which caused no damage, what a great phone that was). I have not been able to read about this same issue anywhere else either...generally its an issue with the PC not recognizing the device but when someone gets it to link up correctly, it works. this is the opposite.
thank you for your ideas so far.
DocHoliday77 said:
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Click to expand...
Click to collapse
Odin shows the "0:COM" like it should, which means it is able to read that the device is there, it just is unable to do anything after "boot.img", everything that is needed for this to work via the toolkit method is checked (USB debug and unknown sources).
I just got the s3 and had transfer issues too. Turns out my s2 drivers wasn't perfect for it even though it recognizes the device. I used the s3 drivers instead and that helped things a bit with accessing my phone's storage. So i ended up formatting my internal storage and that seems to do the trick for me.
If that doesn't work and odin still gets stuck then try different usb ports also try different wires
Sent from my SGH-T999 using xda app-developers app
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Currently do not have an external SD.
Baseband version T999UVLH2 is what i have running after a fresh phone reset.
Teo032 said:
So i ended up formatting my internal storage and that seems to do the trick for me.
Click to expand...
Click to collapse
Did you do that through terminal? doesn't the single partition mean that it would wipe everything?
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Aerowinder said:
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Click to expand...
Click to collapse
None of that worked. I did find a BIOS upgrade for my mobo that i didnt know was released, flashed it, and transfers still hang. i tried everything from your sig to no avail. i DON'T have access to another computer... BUT i do have Ubutnu running on my comp in conjunction with Win 7 Ultimate 64. can't seem to find too much on non-international S3 stuff for linux.
this has consumed my entire day and i am so frustrated.
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
psykhotic said:
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
Click to expand...
Click to collapse
airdroid for music transfers, got it. im screwed on the root thing though.
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Spaldino said:
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Click to expand...
Click to collapse
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
didn't work either. i give up. MTP is garbage.
Different computer?
Sent from my SGH-T999 using xda app-developers app
I had these frustrations as well. I finally move where I was connecting the cables. First instinct was the easiest access on my computer. It always failed. I finally decided to try my back usb and it worked it also picked up as a mass storage as well.
Sent from my SGH-T999 using xda app-developers app
Yeah I'm starting to think you might need to use a different computer. Odin detects so it's not drivers.
From my experience with the hangs when i was on the s2. Many also reported this but what helped was different usb ports, wires, or an entirely different computer.
Sent from my SGH-T999 using xda app-developers app
So, I had a rooted, stock install of ICS (FF18) as well as AGAT. I decided I wanted to try out Cyanogen, so after trying unsuccessfully for a number of hours, I discovered Resurrection Remix, installed it, and it was working great. Only problem is, I had no base band and could not connect to my cell network or use WiFi. I tried installing it a few more times with different modems and none worked, so I flashed back to FF18 and got that all set back up. I read somewhere that you should try using a stock JB install before installing RR, so I flashed a JB ROM, and had the same issues with no working modem/baseband. So now I decided to just give up and go back to ICS, but I'm having an issue doing that. My USB does not function at all. It charges, but does not show up on my computer, nor can I ODIN it. I've tried all the tricks on here (Re-installing drivers, different cable/computer, *#7284) and it still will not work. I can't exactly reflash it without ODIN or CWM, and am at a loss as to what to do. Thanks for any help.
I should mention that this JB ROM is rooted, but I can't seem to access anything on my SD card, so transferring files seems to be out of the question.
I'm not familiar with this resurrection remix rom. I did a quick google search and it appears to be for other versions of galaxy s2. You cant use a rom from any other model device with Epic 4g Touch. Im amazed it booted.
Exactly what JB rom are you running? There is always bluetooth to transfer files and mobile odin to flash a new kernel.
oh no. the s2 is NOT the epic 4g touch!
You can try to use mobile odin to reflash a epic 4g touch rom. Cyanogenmod would work fine if you used the rom for your phone located on xda and not on the get.cm site...
calisro said:
oh no. the s2 is NOT the epic 4g touch!
You can try to use mobile odin to reflash a epic 4g touch rom. Cyanogenmod would work fine if you used the rom for your phone located on xda and not on the get.cm site...
Click to expand...
Click to collapse
I would do that but I have no other Bluetooth devices to transfer with (Excapt maybe I can borrow a friend's iPhone) and for whatever reason it's not mounting the SD card. I'm thinking the USB drive simply died, because the first few times I booted into the RR rom, everything worked, other than the radio of course.
someguyatx said:
I'm not familiar with this resurrection remix rom. I did a quick google search and it appears to be for other versions of galaxy s2. You cant use a rom from any other model device with Epic 4g Touch. Im amazed it booted.
Exactly what JB rom are you running? There is always bluetooth to transfer files and mobile odin to flash a new kernel.
Click to expand...
Click to collapse
It was working perfectly fine (Other than the radio), until I put the stock one on there. I can't find the link for it now.
why do u need bluetooth. you said it boots.... open a browser and download mobile odin, mobile odin kernel module, and a rom.
calisro said:
why do u need bluetooth. you said it boots.... open a browser and download mobile odin, mobile odin kernel module, and a rom.
Click to expand...
Click to collapse
WiFi doesn't work along with the rest of the modem stuff. Bluetooth is the only thing I can get working. Sorry, I forgot to mention that before.
Echo35 said:
WiFi doesn't work along with the rest of the modem stuff. Bluetooth is the only thing I can get working. Sorry, I forgot to mention that before.
Click to expand...
Click to collapse
well if u can get those files on there and you have a root then you may not have a brick... if you can, try mobile odin like I said or try this guide... (manual method in 2nd post using connectbot to get shell access
http://forum.xda-developers.com/showthread.php?t=1865102
calisro said:
well if u can get those files on there and you have a root then you may not have a brick... if you can, try mobile odin like I said or try this guide... (manual method in 2nd post using connectbot to get shell access
http://forum.xda-developers.com/showthread.php?t=1865102
Click to expand...
Click to collapse
That was the plan, but like I said, I can't seem to mount an SD card either. Is there any way of getting files on there at this point other than bluetooth? I know I have root and I've got the FF18 Odin rom still, so I guess all I really need is a way to get that and Mobile Odin on there, which is of course, the real problem here.
EDIT: I should also mention that CWM is no longer on there since it's a stock ROM. All I have is root.
your options are wifi, usb, sdcard, bluetooth, 3g... so if none are working then just bluetooth which will be challenging in itself. I think you'll neef to rename the files to things like .jpeg for bluetooth to transfer them. good luck.
calisro said:
your options are wifi, usb, sdcard, bluetooth, 3g... so if none are working then just bluetooth which will be challenging in itself. I think you'll neef to rename the files to things like .jpeg for bluetooth to transfer them. good luck.
Click to expand...
Click to collapse
I'll borrow a friend's phone tomorrow and give that a shot.
Buy a usb bluetooth adapter and use a pc. They can be found at any store that sells pc accessories for a few bucks. Also many new laptops have built in bluetooth.
In the future only download roms from here
someguyatx said:
Buy a usb bluetooth adapter and use a pc. They can be found at any store that sells pc accessories for a few bucks. Also many new laptops have built in bluetooth.
Click to expand...
Click to collapse
I actually have one, but I couldn't manage to get it working (It's really old, newest drivers are for Vista).
Can you get to dl mode? If so try stock EL29 one click exe. Probably won't work, but it's worth a try good luck
byrdcfmma said:
Can you get to dl mode? If so try stock EL29 one click exe. Probably won't work, but it's worth a try good luck
Click to expand...
Click to collapse
Yes, however, it won't connect to Odin, which leads me to believe the USB is simply fried. It was being a bit unstable all week now that I think about it.
Also Bluetooth didn't work. I guess that part is borked as well.
Echo35 said:
Yes, however, it won't connect to Odin, which leads me to believe the USB is simply fried. It was being a bit unstable all week now that I think about it.
Also Bluetooth didn't work. I guess that part is borked as well.
Click to expand...
Click to collapse
Possibly done then. By flashing a Rom that was not for the phone, it's looking in the wrong place for the usb.
if you can get the files on your phone (mobile odin, mobile odin kernel flasher, a e4gt rom) you may be able to fix it... but you have to either get them on there or have a working usb to use pc odin.
also try a different usb cable and usb ports on the pc.
if all else fails your sending it off for jtag.
byrdcfmma said:
Possibly done then. By flashing a Rom that was not for the phone, it's looking in the wrong place for the usb.
Click to expand...
Click to collapse
Shouldn't Odin still work though? I thought download mode was independent of the ROM.
Echo35 said:
Shouldn't Odin still work though? I thought download mode was independent of the ROM.
Click to expand...
Click to collapse
he replaced the bootloader with a s3 bootloader
Now my next question, will MDPA actually replace it since I have insurance (Probably not) or should I just go ahead and mail it in to MobileTechVideos?
Echo35 said:
Now my next question, will MDPA actually replace it since I have insurance (Probably not) or should I just go ahead and mail it in to MobileTechVideos?
Click to expand...
Click to collapse
you can prob just buy a $5 jig.
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1
This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...