Related
Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me
Sounds interesting but I'm just wondering
OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?
thx
This method work on Cricket in USA and in TATA in India
Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.
Go on and take it into TATA
I already have activated so many Phones
Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network
I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?
I used this ..so easy
so if you activated your phone for india service, would you be able to use it in the United States?
--James
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.
Good luck.
Click to expand...
Click to collapse
are u then able to have both NAM1 & NAM2 on the phone?
NAM
You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.
Thanks a million time to Shadomite
He had Cracked and changed the ESN
I have POsted the Simplified Method Just have a look
http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82
Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?
''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''
What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?
I have an HTC TOUCH CDMA ver in Greece!
Help..
Having HTC P3050
you have given the file i have downloaded it but now how to use it and activate on tata can u help me
Need English Viva ROM for Vogue (MP6900SP)
Thank you for this great post. I followed the instructions without bricking my phone. I looked at the 'simpler' one linked to here, but found the one on this thread much easier to follow and use.
Now all I need is the ROM for Viva (North America or Carribbean). Where can I find this? Thanks,
WMT
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
puneet_july30 said:
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
Click to expand...
Click to collapse
Mobile-Files was taken down a few months ago.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
Click to expand...
Click to collapse
Thanks a ton, I have completed all the steps 30, now how can I run the other network on my phone.
Do I have fill all the network details in the QPST Config step..???
that's great thank you man
Thank you. it was more then easy.
Now it works.
help me
How can I use this file for my HTC Hero CDMA? this QCN file giving error.
help me.
THIS IS FOR EDUCATIONAL PURPOSE ONLY
Guide on Flashing HTC Droid Incredible to Boost Mobile
What you NEED
QPST
QXDM 3.11 (Google is your friend)
CDMA Tools 2.7 (Demo is good too)
Patience
HTC Diagnostic or HTC USB MODEM Drivers (I will include Win7 x64 Driver)
Donor Phone Driver (Google is your friend)
Winhex (Again, Google )
Boost Mobile Account [seems difficult for those without it]
What you DONT NEED
Wife
Kids
*Install all drivers and programs**
If you do not know how to manually install a driver, I suggest you stop where you are now.
Step 1: Donor Phone MSL/SPC
This one is really simple, call Boost Mobile Customer Rep. (To get directly to them after the guy says "For espanol press 5", just press 5, then press 2, and wait for it to ask you "To chat with a Boost Customer Rep press 0") and tell them your phone needs to be programmed and they will tell you to dial ##MSL#. SAVE THAT NUMBER and then just hang up on them.
Step 1.5:
Incase you are scared to talk with boost mobile, or you don't know your 6 digit MSL/SPC code you will have to find it manually. *Sigh*
Open QPST, click [Add New Port] on the bottom right, then uncheck [Show serial...] on the bottom left corner and on the screen to the left you should see your Donor's Port number, add it and make note of it.
Next open CDMA workshop, connect to your phones Port (COM) number, click read and your phone information will be displayed on the left.
Click on the memory tab, under memory/Eeprom put start Address: 0363:0000 leave the size at 65536 bytes, now click read and save the .bin files on your desktop.
FINALLY, open up Win Hex, open the memory file you just saved, click on specialist- Gather Text; Recognize text by "6" uncheck everything expect for " Numbers" press "OK", save the file anywhere you like. You should end up with a .txt document with 1 or more 6 digit numbers; one of them is the SPC for your phone, write it or them down.
Step 2: NV Items
Open CDMA Workshop again, go to Security under SPC write your MSL code and click SPC -> Send. It should say phone is unlocked.
Now go to Memory tab, and click Read NV_Items, and you will read NV_Items 455, 466, 1192, and 1194. Save them all.
Step 3: NAM 1 & 2
Stay in CDMA Workshop, and click the NAM Tab. Click “Read” this will display all your phones information inside of “NAM 1” Save the filename as NAM 1 and do the same for NAM 2.
Step 4: M.IP
Close Cdma Workshop. Open Service Programming and enter your Donor phones SPC. Click Read and navigate to the “MIP” Tab, we need your Donor phones NAI. Click on Profile 1 and copy down everything just to be safe. Do the same for Profile 0 if available.
Step 5: HA & AAA Passwords
HA Password for both Profiles will be "secret" in text formatClose Service Programming and open QXDM. Now in the Command Prompt on the top screen type in "SPC [MSL]" Then type in “Requestnvitemread ds_mip_ss_user_prof 1” to retrieve your Profile 1 AAA 6 Digit password. It will be the first 6 Digits in DIAG RX, which is written in HEX mode. For Profile 0, simply open NV_Item 466 all numbers after the number 10 and before the last pair of 0's will be your Profile 0 AAA. Or you can type in QXDM Requestnvitemread ds_mip_ss_user_prof and it will be all the Digits in AAA SHared DIAG RX.
If it says Access Denied it means you do not have a Profile 0. *Dont worry about it*
DONT EVER TURN ON THE DONOR PHONE'S RADIO AGAIN, PUT IT ON AIRPLANE MODE OR SOMETHING
Step 6: Root your HTC DROID INREDIBLE
Follow directions --> http://androidforums.com/incredible...ked-3-rooting-stock-incredible-evo-2-2-a.html
Step 7: Writing NAM and NV Items
Plug in your Droid Incredible to the PC. Open QPST and add its port number. Open CDMA and connect then read the Incredible, next go to Security Tab and under SPC write 000000 and send SPC.
Next go to the "Memory" tab, NV Items and write the 4 NV Items we saved from your donor phone earlier.465, 466, 1192, and 1194. Then navigate to the “NAM” TAB and Write the Nam 1 and Nam 2 Files we saved earlier by clicking Load before each on of them. If done correctly it should display your donor’s phone number and other information.
TYPE IN ##DIAG# IN YOUR DROID TO GO INTO MODEM MODE
Step 8: Zero'ing ESN & MEID
Close CDMA Workshop and open QXDM, Options- Communications- Target Port/ select your Droid Incredible's Port, click OK. You should now be connected to your phone. (if you have any trouble connecting to QXDM make sure you set your com port in QPST Configuration and use the same in Qxdm's communications, So you can actually see what's going on from the View drop down screen, select Command Output. Press F4 to get to the memory view, Change Rows from 8 to 16, Find you HEX MEID and ESN by calling ##786# it will look something like this...
MEID: A1000009C57FQZ
ESN: 8373B5C5
They might have an "0x" in front of them, just ignore that, Now pay close attention, following the example MEID and ESN I provided above you are going to separate every 2 characters and then you are going to flip a few to make it backwards just follow my model and do the same to your numbers.
Original: Separated: Flipped:
MEID A1000009C57FQZ MEID A1 00 00 09 C5 7F QZ MEID QZ 7F C5 09 00 00 A1
ESN 8373B5C5 ESN 83 73 B5 C5 ESN C5 B5 73 83
*Note* Your Meid and Esn will differ from the one used in this guide please find your own and use the same method you will need this to find you Meid and Esn in the memory.
Now the tricky part, you may have to Zero them out several times so it will stick (I would consider zero'ing them several times before restarting the phone)
These are all possible ESN and MEID Locations, [ATTACHED]
At each location, find your Meid or ESN and replace it with Zeros (0) then click Write and goto the next Meid or ESN. Do not alter anything but meids or ESNS. After you Zero'ed them out type the command "Requestnvitemread MEID" and "Requestnvitemread ESN". If its Zero'ed restart the phone, if its not, you missed a spot.
To make sure its been Zero'ed out FOR SURE restart the phone and when is back on dial ##778# click View, then Display and make sure your MEID and ESN is all 0. If its not, then try again.
Step 9: Writing MEID
After you get a message that it's zero than u can proceed to write your ESN or MEID which ever you prefer.
Commands are
requestnvitemwrite scm 0x3a
requestnvitemwrite meid 0x0(Your MEID)
MEID = actual 14 digit meid (not in reverse)
If u are writing MEID no need to write the ESN.
requestnvitemwrite esn 0x(Your ESN)
esn= actual 8 digit esn (not in reverse)
Step 10: Configuring Data
Close QXDM, open Service Programming. Navigate to the M.IP tab.
3G Donor PHONES ONLY: Click profile 0 and click edit. Check and make sure your “NAI” is the correct one for boost mobile. Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s. (it may be different for your area)
NAI:[email protected]
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s
NAI:[email protected] (May varie)
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok
Make Active User 1.
Write to phone, and restart the Droid Incredible.
Now give yourself a pat in the back because you just Fully Flashed your Droid Incredible to Boost Mobile
I have yet to Know how to configure the USE of MMS, but if you know how to drop it in here .
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Any questions?
EDIT** Incase your Data isnt working try this and MAKE SURE, you have this.
1. Make sure your ACTIVE USER is 1.
2. Make sure your HTC INCREDIBLE has the same PRL as your donor phone! (THIS IS HIGHLY IMPORTANT) To extract the PRL from your donor phone simply:
Connect your donor phone, Open 'Service Programming' click 'Read from Phone' enter your MSL, and then click 'Save to File' save it anywhere. You will get a qcn file, and a rl0 file. The 'rl0' file will be the PRL.
Also this happened to me before, lol, MAKE SURE MOBILE NETWORK in 'Menu -> Settings -> Wireless and Networks is TURNED ON !!
Any more questions let me know
UPDATE: Try this by igotanmp3 to get MMS working. NOTE* It does not work with Custom Themes http://forum.xda-developers.com/showpost.php?p=16440594&postcount=69
UPDATE: For Droid Incredible S & 2 FOLLOW --> http://forum.xda-developers.com/showpost.php?p=21668680&postcount=145
So did you ever figure out the mms settings? I've seen some guy in New Jersey doing full flashes on HTC Incredibles on Boost Mobile. I tried to contact him, but it seems like he is somewhat of a prick. I've been racking my brains trying to get the mms working. So far my Dinc has talk, text, internet and Sprint TV working.
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
eljean said:
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I downloaded the Sprint TV Apk file and that was pretty much it
TRY THIS FOR MMS
MMS
************************************************** *******************************
(My original work)
After making sure web works,
1. Download APN Backup & Restore(Android Market)
2. Click Backup APNs
3. Goto your sdcard/ApnBackupRestore
4. Click the apn file and edit under windows or on your phone.
5. Look for the line that says Production and edit.....
<apn name="Production" numeric="00000" mcc="310" mnc="00" apn="1"
user="[email protected]"(may varie) server="null" password="null proxy="null"
port="" mmsproxy="" mmsport="" mmsprotocol="2.0"
mmsc="http://mm.myboostmobile.com" type="mms" />
6. Save the file(make sure you save it)
7. Open the APN Backup & Restore program
8. Click delete APNs(Very important)
9. Click Restore APNs
10. Close the program
11. Goto messages>menu>settings>connection settings. Make sure everything is as you edited. You should see Name(Production), MMSC(http://mm.myboostmobile.com), MMS proxy(not set), MMS port(not set), MMS protocol(WAP 2.0).
12. If everything is just as it is, viola you are all set...
Taken from http://www.howardforums.com/showthr...lashed-to-Revol-with-working-Internet-and-MMS and fixed to the Boost Mobile apn settings... correct it if its wonrg, Im not 100% sure on the settings...
I haven't tried it yet im still waiting for my MicroSD Card from Ebay :\... lol you be the guinnea pig let me know how it goes
this would go a lot better in the dev section
JoelZ9614 said:
this would go a lot better in the dev section
Click to expand...
Click to collapse
Ahh, I didnt know where else to put it
this is awesome.. what about PTT? does it work?
remy2501 said:
this is awesome.. what about PTT? does it work?
Click to expand...
Click to collapse
Yeah it should
DRIVERS
FORGOT to attach the DRIVERS sorry
Any possible way to go back to verizon MEID?
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
Just write the original MEID and the phone would provision itself IF it has a clean esn
Sent from my ADR6300 using XDA App
Still no mms on the HTC Droid Incredible on Boost
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
roclikewhat said:
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
Click to expand...
Click to collapse
Same here. I used APN Manager and changed the mmsc url but then it would just give me access denied.
Sent from my ADR6300 using XDA App
Hello,
I read all posts above, but I couldn't understand completely. It is possible use htc incredible 2 on boost mobile?
I can buy one from ebay with clean esn and use it on Boost mobile?
thank you
idk
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
to be honest with you, I am not entirely sure, theoretically it should be possible but at this moment I do not know since it is a new phone with new software etc etc. And I heard HTC is starting to lock their esn locations with some type of encryption so u cant read it.
Google around u might be able to and if u find someone who says and has backup that is possible come back to this guide and follow it .
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
armars said:
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
Click to expand...
Click to collapse
I did a little bit of research and so far I can conclude that it is not possible. I may be wrong though. I am 90% positive it is not posible YET lol
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Click to expand...
Click to collapse
So you could flash it to boost mobile, but couldn't activate?
armars said:
So you could flash it to boost mobile, but couldn't activate?
Click to expand...
Click to collapse
Yeah if your donor phone is already activated
k guys, this thread is coming about after respectfully moving the discussion from kalaker's s-off thread.
i've been looking for a while about how to back up my nv keys for data, just in case anything happens to my one v. this is thanks to New Optimus (for steps 8-10) and jmztaylor, who informed me the open sesame door trick works. I AM NOT RESPONSIBLE FOR HOW SOME MAY USE THIS. open sesame door trick has the potential to screw your phone up if you dont do it right, or delete an nv item.
CDMA ONLY (i dont think gsm works the same way anyway)
YOU ARE NOT MODIFYING ANYTHING. All you are doing is backing up your AAA and HA keys. they are used to identify and register your device's data on the VM network. IF YOU MODIFY ANYTHING, ITS YOUR FAULT IF YOU SCREW IT UP.
step 1:
download and install qpst. im not linking to the file, you should be able to find it easily enough by googling it.
step 2:
open up qpst configuration, and let it sit in the background for a minute. install the htc diag drivers for one v from here: http://www.htc.com/www/support/
look for the one v, and download and install the HTC Sync program which will install all the drivers you need.
step 3:
close out of htc sync once its installed, its an annoying program anyway. connect your phone, make sure adb debugging is enabled in developer options in settings. open the dialer, type in ##3424# (##diag#) and a screen will come up that says on and off, with select at the bottom. click on, then select, and it will ask you for your msl code.
note: your msl code can be obtained by a app in market called MSL Reader, you need root for this. follow the prompts in the app, its easy enough to do.
step 4:
after entering your msl code and entering diag mode, go back into qpst configuration. click on "add new port" toward the bottom right, and make sure when the window opens "COMx- USB/QC Diagnostic" is selected and click ok. qpst configuration should now recognize your phone as SURF-MSM7830. if it doesnt, update your version of qpst.
step 5:
in qpst configuration, click on "Start Clients- EFS Explorer". make sure you put your msl in the box that says spc, and click ok. a please wait window will pop up, it will only take a few seconds.
from New Optimus's post: http://forum.xda-developers.com/showpost.php?p=29951978&postcount=796
8. Once the phone reads completely make a new directory named (open sesame door) without the parentheses and all lower case
9. After making the new folder locate abd.exe from the android sdk install folder and press: start, run and type cmd then press enter you will get a command prompt window that opens up navigate to the android sdk directory and type; adb reboot, the phone should then reboot if you’ve done as you were supposed to.
10. After the phone reboots read it again with QPST EFS Explorer which still should be opened, you will notice that the red no access circle has been removed from the nvm directory so expand it and go to the num directory,
Click to expand...
Click to collapse
(note: edited New Optimus's post to remove links to esn/meid changing which is frowned upon in the forums, also i already had the open sesame door folder created upon making the pictures.)
left click and drag 465, 466, 1192 and 1194 to your desktop.
keep 465,466, 1192 and 1194 in a safe spot, they are how you have data on your phone. if something happens to your HOV and those are gone, good luck getting data back.
Quick noob question, do these files get generated by the carrier when you activate the phone?
whoshotjr2006
Do AKEY, SSDA and SSDB files need to be saved? if so, where are the files?
reachforthesky said:
whoshotjr2006
I know the content of file 0 and 1943. Could you briefly describe the contents of these 4 files (465, 466, 1192 and 1194)? Which one is HA, AAA, SSDA and SSDB? Are there any more important NVM files need to be saved?
Click to expand...
Click to collapse
465^"Data Services Mobile IP General User Profile"^"Data*"
466^"Data Services Mobile IP Shared Secret User Profile"^"Data*"
1192 is the AAA secret
1194^"HDR Access Network Stream CHAP Authentication User ID"^"Data*"
The reference is here: http://forum.xda-developers.com/showthread.php?t=1954029
Got sooo excited when I saw this. Used to switch firmware's on my optimus v with the firmware of the optimus s, and use optimus s roms. Had all of my nv data and everything else backed up. Forgot you have to have be on an aosp rom for this to work because you need a port. -_- I don't have a stock backup and right now I'm tethering, so it'd take awhile to download a stock backup. Guess I'll have to wait a week or so.
nvm, I found a backup. I tried it out, and i got to the qpst efs explorer. I did the open sesame door, and it unlocked the nvs, but I only had a couple of the files from the list. I did not have 465 or 466. Also, I had an issue when I tried to recognize the phone. It did recognize the phone in diag mode with the port, but not as surfmsm7830. I have the most updated version of qpst.
I'll have to check what version I'm running of qpst, I know its close to the newest if not the newest. It wouldn't recognize my phone correctly until I had a new enough copy.
Also the first time I tried the open sesame door trick, I too had the limited nv items. I used the ruu to go back to stock, and once I did that the open sesame folder dir survived the ruu and unlocked the rest of the nv items.
Hope that helps.
Sent from my One V using xda app-developers app
What version of QPST are you using for this? I get an error "Online connection failure: Unspecified error" when trying to connect.
I think my phone isn't getting read properly by QPST because under phone it says "(unknown)" even though the other fields fill in correctly.
CDMA Workshop reads my phone no problem, but this thing no luck.
EDIT: Found an updated build and it displays the specified info under phone. Not sure what the lowest working version is, but v2.7 build 323 will not read it, build 366 will though.
I am using a HTC One V CDMA (Virgin Mobile USA) in India on Reliance CDMA network. The phone was flashed to Reliance and everything is working fine ie I can make/receive calls/sms etc. 1x / EVDO credentials have already been written to the phone.
Now the issue is that I am not able to enable data or the data connection doesn't get enabled automatically. When I try to enable data it says "Disconnected because service is unavailable". But if I press the "Activate this device" button in the settings section, an activation screen 1..2..3 comes up, then wait for 3-4 sec, the 3G symbol gets displayed meaning its able to make a data connection. Now if I go back to the settings page and enable data it successfully connects, and I am able to access internet at EVDO speeds. But after some idle time, the data connection is automatically disconnected and to reconnect I need to repeat the above process. Even if I intentionally disconnect data and try to reconnect, it doesn't happen and I need to go through the "Activate this device" process.
I believe some sort of initialization is missing which is done during the "Activate this device" phase and hence I am able to connect. What could be the reason for this? Is it some setting/configuration that needs to be enabled?
Please pour your valuable tips to resolve this issue.
Thanks
Fixed the issue with auto connection of data, not sure what fixed it exactly, but here are the last changes that I made after which it started working.
You need to use the tool QPST (I used version 2.7.378, an older version didn't work) for this.
In the M.IP tab, disable all profiles except profile 1
Then edit profile 1 and make changes (check attachment)
Then in RmNet tab enable auto connect for device 0 and 1.
After that
PPP Config --> Um --> Enter user/pass as "net" (Req Pw enc should be unchecked)
PPP Config --> AN --> Enter the EVDO credentials given by the MEID registrar (Req Pw enc should be unchecked)
Please note that I got it working merely by trial and error and some of the above changes may not be required and I am not even sure why they are necessary , but with the above configuration I am able to enable data without any problem.
iamvarkey said:
Fixed the issue with auto connection of data, not sure what fixed it exactly, but here are the last changes that I made after which it started working.
You need to use the tool QPST (I used version 2.7.378, an older version didn't work) for this.
In the M.IP tab, disable all profiles except profile 1
Then edit profile 1 and make changes (check attachment)
Then in RmNet tab enable auto connect for device 0 and 1.
After that
PPP Config --> Um --> Enter user/pass as "net" (Req Pw enc should be unchecked)
PPP Config --> AN --> Enter the EVDO credentials given by the MEID registrar (Req Pw enc should be unchecked)
Please note that I got it working merely by trial and error and some of the above changes may not be required and I am not even sure why they are necessary , but with the above configuration I am able to enable data without any problem.
Click to expand...
Click to collapse
Thanks for the above method .. Did you use this method after loading the NVDump file given by the registrar ? ... ALso when i edit the UM and AM feilds and issue write to the phone its showing as the phone has a read only NV ITEMS.
yakaaithiri said:
Thanks for the above method .. Did you use this method after loading the NVDump file given by the registrar ? ... ALso when i edit the UM and AM feilds and issue write to the phone its showing as the phone has a read only NV ITEMS.
Click to expand...
Click to collapse
Well, I had loaded the NVDump earlier, but as I had mentioned it would connect first but if you disconnect or get disconnected it wouldn't reconnect.
Check if the SPC is correct, cause I never got any error like that.
iamvarkey said:
Well, I had loaded the NVDump earlier, but as I had mentioned it would connect first but if you disconnect or get disconnected it wouldn't reconnect.
Check if the SPC is correct, cause I never got any error like that.
Click to expand...
Click to collapse
OP, I am taking a HTC One V for my dad and plan to use it with reliance, could you please tell me what I need to do ?
I already unlocked and rooted the phone. Do I just walk into a reliance store or do something more on computer etc before going there ?
experx said:
OP, I am taking a HTC One V for my dad and plan to use it with reliance, could you please tell me what I need to do ?
I already unlocked and rooted the phone. Do I just walk into a reliance store or do something more on computer etc before going there ?
Click to expand...
Click to collapse
You are talking about Reliance CDMA right?
If yes you need to get the MEID registered, will cost you about Rs 500. Reliance store guys will not do it, have to get it done through some 3rd party provider.
It says Read only NV Items for me too
2kool2btrue said:
It says Read only NV Items for me too
Click to expand...
Click to collapse
That's fine. Its only for one particular NVITEM. Just ignore it.
Hello varkey bhai,
Please Help me with the problem.
1. my meid is registered with reliance.
2. my prl is 00005
3. i am using the handset since 10 months.
4. evdo is also activated on my number.
But i am just getting 1x speeds.
Only thing i feel, i am missing out is on the username,Password,NV file,akey etc.
I have not received the above details from my reigstrar
Can u please guide me how this can be done to start evdo speeds.
Thanks in advance
vakubhai said:
Only thing i feel, i am missing out is on the username,Password,NV file,akey etc.
I have not received the above details from my reigstrar
Click to expand...
Click to collapse
Without the correct EVDO credentials, you won't be able to get EVDO speeds. You need to check with your MEID registrar.
NV dump is not really required and the same can be configured manually if you have the credentials as I have described above. Since you are able to make and receive calls, it looks like the Akey is already set.
so that means if i dont get the credentials from the registrar EVDO can never be started on this handset??
iamvarkey said:
Without the correct EVDO credentials, you won't be able to get EVDO speeds. You need to check with your MEID registrar.
NV dump is not really required and the same can be configured manually if you have the credentials as I have described above. Since you are able to make and receive calls, it looks like the Akey is already set.
Click to expand...
Click to collapse
vakubhai said:
so that means if i dont get the credentials from the registrar EVDO can never be started on this handset??
Click to expand...
Click to collapse
You could check with some other person who does MEID registration, maybe they can retrieve the credentials. But without it, EVDO will not work.
i have an htc droid incredible and i am facing the same problem as mentioned above are the steps above same for my phone also
vikisharma said:
i have an htc droid incredible and i am facing the same problem as mentioned above are the steps above same for my phone also
Click to expand...
Click to collapse
Try it out. It should work.
NVITEM Dump file
iamvarkey said:
That's fine. Its only for one particular NVITEM. Just ignore it.
Click to expand...
Click to collapse
Hello iamvarkey,
i have a sprint htc one that i have flashed but still dont have signal for voice and data. will the nv dump file help resolve this issue and how can i get it.
thanks
jewelman said:
Hello iamvarkey,
i have a sprint htc one that i have flashed but still dont have signal for voice and data. will the nv dump file help resolve this issue and how can i get it.
thanks
Click to expand...
Click to collapse
Simply by loading the Reliance PRL file, you should have voice signal, if not you are doing something wrong.
iamvarkey said:
Simply by loading the Reliance PRL file, you should have voice signal, if not you are doing something wrong.
Click to expand...
Click to collapse
i had done that but didnt work. the phone was sent to me without activating it first with sprint, can this affect it
jewelman said:
i had done that but didnt work. the phone was sent to me without activating it first with sprint, can this affect it
Click to expand...
Click to collapse
I don't think that would be a problem.
Make sure you are using the right PRL file.
No above steps required.
You must have flashed NV Dump already.
Your phone must be activated via *228 already.
Just perform below mentioned steps :
1) Put your phone in Diag Mode by dialing ##3424#
2) Get HTC Diag Mode driver if you don't have it already
3) Download DFS Demo version from DFS Website
4) Connect your phone with DFS, send SPC
5) Now, go to Programming tab -> Data ->
6) Click Read
7) At PPP tab, write "net" (without quotes) to SIP NAI, UID, Pwd field.
Restart the device and here you go, your device would get connected to internet instantly.
keval32 said:
No above steps required.
You must have flashed NV Dump already.
Your phone must be activated via *228 already.
Just perform below mentioned steps :
1) Put your phone in Diag Mode by dialing ##3424#
2) Get HTC Diag Mode driver if you don't have it already
3) Download DFS Demo version from DFS Website
4) Connect your phone with DFS, send SPC
5) Now, go to Programming tab -> Data ->
6) Click Read
7) At PPP tab, write "net" (without quotes) to SIP NAI, UID, Pwd field.
Restart the device and here you go, your device would get connected to internet instantly.
Click to expand...
Click to collapse
Keval,
I recently bought a HTC One E8 and am using Reliance CDMA on Slot-1 and facing this issue.
Would the steps jotted by you help me?
Thanks,
Vinay
Hi there every one I have been flashing phones to metro PCS for a while now But this is my first How to. I'm going to show you how to flash your sprint/Verizon Galaxy S3 to metropcs or cricket, with 3g data working.
What you'll need:
DFS demo mode will do. But if you can, make a small donation.
Samsung drivers. Just download keys from http://www.samsung.com/us/kies/
metropcs Prl 3032 from here http://metroprl.blogspot.com/
WARNING!! YOUR PHONE MUST BE IN METROPCS INVENTORY IN ORDER TO GET SERVICE, YOU CAN FLASH YOUR PHONE ALL DAY BUT IF YOU DO NOT HAVE YOUR ESN IN METROPCS DATA BASE THEN YOU WON'T GET SERVICE NO MATER WHAT YOU DO. UNDERSTOOD?
One of the first things you'll need is to get your phones MSL number, this is the number you'll need to get access to your phones secret menu. The method i am about to show you was discovered by billard412 this post, http://metroprl.blogspot.com/ if you have a verizon your MSL is 000000
Now lets get that MSl (you must be rooted) download terminal emulator or the, Get my msl app from market. Now on your dial pad type ##3282# now you'll have a screen with vie or edit click on edit, now open terminal emulator or the app, if you are using terminal type: su then enter---now type-- getprop ril.MSL then enter you might get a nothing back or you might get the number.
ps: if you are on JL13 you won't be able to get it downgrade your base-band.
if you didn't get nothing back go the the screen that asks for your msl and type any 6 digit number when it sais wrong code go back to the terminal and re type the comand and wala. If you use the app same steps just whith the app.
Now that you have your MSL open DFS, now go to your phones dial pad and dial *#7284# and select qualcome USB Setting, now select the last option DM+MODEM+ADB and plug in your usb to your pc. I normally open device manager to see what port my phone is, I sugest you do the same.
Now that you know what port your phone is on DFS click on the port tab and select your port now find the MSL or SPC space and enter your MSL then hit the play button to the left, now that your phone is unlocked we are ready to make changes.look at my images so you can compare.
Click on the programming Tab
Now hit the read button and change the MIN number MIN D , SPC, and MND number for the one provided by metropcs.
Now look to the right is the PRL section click on the load button look for the prl the click on the write button, now on the reset button and your phone will reset, I like to do it one step at a time. Now test out the PRL by going to settings about. or just dial *611 from phone and you should get metropcs. If you didn't, make sure that the mid has changed.
Onece you have that Down re hook up your phone to DFS like before click on te program tab and now on the Data tab. Change settings to match my pics and to get your password use this http://www.whiterabbit.org/android/ to calculate your metropcs MSL just type in your ESN . Once you have it hit write.
Now click on the mobile ip tab and hit read change setting to match pic in the AAA and the HA put in your metropcs MSL ,then hit both of the write buttons, and then the reset button, wala your almost done.
next step set data setting within the phone to stream youtube, Pandora and other multimedia apps that need streaming with in cricket or metropcs
dial ##data# press on edit and enter the spc code you wrote down press on others press on multimedia rtsp proxy port to 0 then press on back.
MMS: follow this guide by Max_pain: http://forum.xda-developers.com/showthread.php?t=1875760 you will need a file from there make sure to thank him.
This is the biggest hurdle, which very few people have successfully gotten to work. It is not a perfect solution but it works very well for us.
Download the following Zip file (not flashable):
Follow these instructions carefully:
1. Download and install Titanium Backup. You will also need the PRO version, so you'll need to shell out a couple of bucks if you don't already own it. It's well worth it anyways.
2. Download and install APN Backup & Restore from the Market.
3. Open APN Backup & Restore, ignore the ICS warning, and click on "Backup APNs". Exit out of APN Backup & Restore.
4. Place this folder in your SD Card.
5. Copy MetroPCS_MMS_Send_APN.xml from this folder to the APN Backup folder in the root of the SD Card.
6. Open Titanium Backup, go under Backup/Restore, and find APN Backup & Restore, press and select "Make system app."
7. Open APN Backup & Restore, ignore the ICS warning, press menu, and disable ICS check. Exit APN Backup & Restore.
8. Open APN Backup & Restore again, and now there should not be an ICS warning!
9. Click on "Delete APNs."
10. Click on Restore APNs and select "MetroPCS_MMS_Send.APN.xml".
10a. Press Ok after selecting the above.
10b. Press No when you get the message asking Yes or No.
11. Using Root Explorer or a similar app, copy the SecMMS.apk file from this folder to your /system/app/ folder.
11a. Make sure you are in R/W mode and click Yes to overwrite existing file if you get the message.
11b. Make sure to delete/overwrite any existing SecMms.apk from the /system/app directory. You should only have one SecMms.apk file.
11c. Make sure to delete any SecMms.odex if you're on the stock or an odexed rom.
12. Set permissions to RW-R--R--
13. Reboot.
14. Open the Messaging app and under Settings make sure to check (enable) "SMS split".
Help
kipster3001 said:
Hi there every one I have been flashing phones to metro PCS for a while now But this is my first How to. I'm going to show you how to flash your sprint/Verizon Galaxy S3 to metropcs or cricket, with 3g data working.
What you'll need:
DFS demo mode will do. But if you can, make a small donation.
Samsung drivers. Just download keys from http://www.samsung.com/us/kies/
metropcs Prl 3032 from here http://metroprl.blogspot.com/
WARNING!! YOUR PHONE MUST BE IN METROPCS INVENTORY IN ORDER TO GET SERVICE, YOU CAN FLASH YOUR PHONE ALL DAY BUT IF YOU DO NOT HAVE YOUR ESN IN METROPCS DATA BASE THEN YOU WON'T GET SERVICE NO MATER WHAT YOU DO. UNDERSTOOD?
One of the first things you'll need is to get your phones MSL number, this is the number you'll need to get access to your phones secret menu. The method i am about to show you was discovered by billard412 this post, http://metroprl.blogspot.com/ if you have a verizon your MSL is 000000
Now lets get that MSl (you must be rooted) download terminal emulator or the, Get my msl app from market. Now on your dial pad type ##3282# now you'll have a screen with vie or edit click on edit, now open terminal emulator or the app, if you are using terminal type: su then enter---now type-- getprop ril.MSL then enter you might get a nothing back or you might get the number.
ps: if you are on JL13 you won't be able to get it downgrade your base-band.
if you didn't get nothing back go the the screen that asks for your msl and type any 6 digit number when it sais wrong code go back to the terminal and re type the comand and wala. If you use the app same steps just whith the app.
Now that you have your MSL open DFS, now go to your phones dial pad and dial *#7284# and select qualcome USB Setting, now select the last option DM+MODEM+ADB and plug in your usb to your pc. I normally open device manager to see what port my phone is, I sugest you do the same.
Now that you know what port your phone is on DFS click on the port tab and select your port now find the MSL or SPC space and enter your MSL then hit the play button to the left, now that your phone is unlocked we are ready to make changes.look at my images so you can compare.
Click on the programming Tab
Now hit the read button and change the MIN number MIN D , SPC, and MND number for the one provided by metropcs.
Now look to the right is the PRL section click on the load button look for the prl the click on the write button, now on the reset button and your phone will reset, I like to do it one step at a time. Now test out the PRL by going to settings about. or just dial *611 from phone and you should get metropcs. If you didn't, make sure that the mid has changed.
Onece you have that Down re hook up your phone to DFS like before click on te program tab and now on the Data tab. Change settings to match my pics and to get your password use this http://www.whiterabbit.org/android/ to calculate your metropcs MSL just type in your ESN . Once you have it hit write.
Now click on the mobile ip tab and hit read change setting to match pic in the AAA and the HA put in your metropcs MSL ,then hit both of the write buttons, and then the reset button, wala your almost done.
next step set data setting within the phone to stream youtube, Pandora and other multimedia apps that need streaming with in cricket or metropcs
dial ##data# press on edit and enter the spc code you wrote down press on others press on multimedia rtsp proxy port to 0 then press on back.
MMS: follow this guide by Max_pain: http://forum.xda-developers.com/showthread.php?t=1875760 you will need a file from there make sure to thank him.
This is the biggest hurdle, which very few people have successfully gotten to work. It is not a perfect solution but it works very well for us.
Download the following Zip file (not flashable):
Follow these instructions carefully:
1. Download and install Titanium Backup. You will also need the PRO version, so you'll need to shell out a couple of bucks if you don't already own it. It's well worth it anyways.
2. Download and install APN Backup & Restore from the Market.
3. Open APN Backup & Restore, ignore the ICS warning, and click on "Backup APNs". Exit out of APN Backup & Restore.
4. Place this folder in your SD Card.
5. Copy MetroPCS_MMS_Send_APN.xml from this folder to the APN Backup folder in the root of the SD Card.
6. Open Titanium Backup, go under Backup/Restore, and find APN Backup & Restore, press and select "Make system app."
7. Open APN Backup & Restore, ignore the ICS warning, press menu, and disable ICS check. Exit APN Backup & Restore.
8. Open APN Backup & Restore again, and now there should not be an ICS warning!
9. Click on "Delete APNs."
10. Click on Restore APNs and select "MetroPCS_MMS_Send.APN.xml".
10a. Press Ok after selecting the above.
10b. Press No when you get the message asking Yes or No.
11. Using Root Explorer or a similar app, copy the SecMMS.apk file from this folder to your /system/app/ folder.
11a. Make sure you are in R/W mode and click Yes to overwrite existing file if you get the message.
11b. Make sure to delete/overwrite any existing SecMms.apk from the /system/app directory. You should only have one SecMms.apk file.
11c. Make sure to delete any SecMms.odex if you're on the stock or an odexed rom.
12. Set permissions to RW-R--R--
13. Reboot.
14. Open the Messaging app and under Settings make sure to check (enable) "SMS split".
Click to expand...
Click to collapse
i tried this and dont know why my s3 keep saying Sprint and it dosent receive calls o text...
Can you please please help me if i do something wrong
Working Talk Text and Data
I literally got my talk text and data working 2 min ago. I have a Verizon Samsung Galaxy S3 that I now am using on Metro PCS.
What I did,
Step 1.
Install Samsung Drivers
Install Kies (To update: I was on 4.1.1 now I'm running 4.1.2)
Step 2.
Root Samsung Galaxy S3. I used Casual one click (It's literally one click)
- Google search key phrase 'root verizon samsung galaxy s3 casual one click'
Step 3.
Now you should have SuperSU
Download
1. APN Manager- I have APN Manager Pro
2. Titanium Backup
Step 4.
I used Titanium Backup to uninstall all the Verizon bloatware, and overall junk I don't use. With removing bloatware click on backup/restore then select and hold APN Manager Pro (or whatever) and select convert to system app.
Step 5.
If not updated to 4.1.2, do so. - You'll need to have the ability to add an APN, only possible with 4.1.2.
I bypassed setting the language etc. with the four corners technique. Google Keyword: 'android four corners trick'
Step 6.
I went out and activated a MetroPCS plan, and got a simcard. At this point I could make and receive calls and text, but no data or mms.
Step 7.
From APN Manager Pro I clicked insert new APN. this can also be done from settings -> More settings -> Mobile Networks -> Access Point Names -> More options soft key: Add new access point. (Updating from phone settings in my opinion is simpler)
Step 8.
New APN
Name: "fast.t-mobile.com" (You can put whatever you want)(without quotes)
APN : "fast.t-mobile.com" (without quotes)
MMSC: "htetep:mms.msg.eng.t-mobile.com/mms/wapenc" (without quotes.Sorry i think you understand what i mean, please put in the letters and not htetep)
MCC: 310
MNC: 260
make sure APN is enabled is checked
Everything else has 'Not set', my APN protocol also says IPv4
Step 9.
Close settings completely
Go back to settings --> Access Point Names to make sure it is still there. Select it if not selected already.
Step 10.
Power off
pull out battery and sim card
wait 10 sec
power on
Step 11.
Enjoy data and mms.
Thank you guys for the instructions, I think I'm about to do the same for my Verizon S3.
But before I do, can you guys post what kind of speed you're getting on the new Metro(GSM)/T-Mobile 3G network?
I remember MetroPCS original 3G on CDMA was horrible and I just want to make sure the Verizon S3 won't suffer the same faith.
Thanks again in advance for you input!
Has anyone tried this with either JB? My phone is on the 4.3 update and I was wondering if it will work.
trinibmw said:
I literally got my talk text and data working 2 min ago. I have a Verizon Samsung Galaxy S3 that I now am using on Metro PCS.
Click to expand...
Click to collapse
Your post is very promising to me since I'm looking to do the exact same thing and not looking forward to the complicated process detailed in the OP. I have a few clarifying questions I hope you don't mind answering for me:
1) Are you limited to 2G and 3G only, or are you able to have 4G/LTE connections?
2) Sorry to oversimplify your method, but boiled down, it sounds like you accomplished exactly what I want to do more or less by simply rooting, debloating, and changing the APN settings. Is this accurate? (Yes I've read your post all the way through five times+, I get there are certain important details to follow, but is my summary correct?)
3) I get the feeling you won't be able to answer this one, but worth a shot: Do you have any idea if this will work if the Verizon S3 came with KitKat (4.4.2) installed? Exhaustive research tells me it's impossible to downgrade android versions from this version.
Thanks for sharing this, and hopefully any answers you can give me. I'll be updating my post on whether or not it works for me when I try later
You are correct, root + debloat, change APN settings. When I had the phone I was limited to 3g speeds. I was still able to use maps, and surf without pulling my hair out. Although, most everywhere I went had wifi so I just ended up using that. As far as number 3, I am not sure. I no longer have the phone. Does the APN show up in network settings now? Could you just try the settings above? You could check if casual one click supports 4.4.2. If it does, you could give it a shot. I didn't have to use it, but if anything goes wrong use ODIN to restore your phone.
My sprint Samsung s3 has no card slot, and I'm with metro, can I use this method and get my metro plan on my s3??? Please need help!!!