This is a kernel compiled from GT-I9505G sources and packed with MF8 initramfs.
I suggest to use it with one 4.2.2 Google Edition rom but is working good also with TW Samsung’s rom.
Is not something special, is a stock kernel i compile because i see some diffs between I9505 & I9505G sources..
Test kernel for Samsung XXUEMJ5 here.
----------------------------------------------------------------------------------------------------------------
@V1
Tested and working:
WiFi
Exfat with Samsung forced to load modules
Mtp
Insecure
Cache & dalvik cache it will auto deleted at installation of the zip.
----------------------------------------------------------------------------------------------------------------
@V2
V1+ Fixed:
Smart Screen on TW rom's.
Screen rotation on TW rom's.
Changes:
Ex-fat modules from android 4.3 leaked rom.
----------------------------------------------------------------------------------------------------------------
@V3
V1+V2+ Fixed:
Core0 MHz
Changes:
Added smart charging from Samsung source (More info)
----------------------------------------------------------------------------------------------------------------
@V4
V1+V2+V3+ Changes:
Updated Linux kernel to latest 3.4.52
Disable Gentle Fair Sleepers (Thanks @broodplank1337)
Disable rooting restrictions (Just in case. Forgot it before..)
Disable all debuggers (Seems unneeded and by disabling those gives better battery life)
----------------------------------------------------------------------------------------------------------------
@V6
V1+V2+V3+V4+V5(test)+ Changes:
Enable CPU under clock (Thanks @ktoonsez)
Removed lot of dmesg log spams (Better battery?) (Thanks @faux123)
Add voltage control (Thanks again @faux123)
GPU OC (Thanks again @faux123)
Added Convervative ConvervativeX and intellidemand governors (Thanks @broodplank)
----------------------------------------------------------------------------------------------------------------
@V7
V1+V2+V3+V4+V5+(test)+V6+ Changes:
Fixed GPU overclock and added {128-200-320-400-450-533-600} Frequencies (Thanks to Talustus) default is 450.
----------------------------------------------------------------------------------------------------------------
@V11
Changes&New thinks:
Updated Linux kernel to latest 3.4.54.
Reworked from scratch CPU OC - UC - VD. (Many thanks to @ktoonsez))
All cores runs at frequencie you set.
(That is very important and you can chek it with kernel tuner app from playstore)
All cores runs on ondemand governor.
(That is also very important and you can again check it with kernel tuner app from playstore)
Added faux sound control (Thanks to @faux123 for his work)
Added kthermal and auto_hotplug. "mpdecision is not works because auto_hotplug take his place if you whant to completly remove mpdecision you can rename /system/bin/mpdecision to mpdecision.back but if you change to other kernel do not forget to rename the file". (Thanks again to @ktoonsez))
Max CPU OC @ 2160000. (I dont need more)
GPU OC steps 128/200/320/450/600 (Disable some frequencies because of the new method ktoonsez use to OC, all apps except his app doesn't want to set anything).
Added Fading-led mod and it is working with everything, Missed call-sms user apps etc...
Disabled Gentle Fair Sleepers.
Enable Fat/MSdos/Vfat and Ntfs(as module) File systems (Thanks to @ktoonsez))
Added CIFS as module.
Ioschedulers: row-bfq-noop-deadline-fiops-sio-vr-zen-fifo-cfq.
Added fast charge.
Other mini thinks that i dont remember now...
----------------------------------------------------------------------------------------------------------------
@V13
Updated Linux kernel to latest 3.4.55.
Added an option to app to control the led (Fade - non fade - speed)
Added an app to manage some basic kernel features based on scripts thanks to HM.Carbide.
Created a new function called set_cpu_min_max which will set the cores specified using a workqueue. (Many thanks to ktoonsez)
Fixed Screen-Off Mhz function. (Now is working)
Auto-Hotplug enabled by default.
NoteThe app and his scripts is on alpha stage need to add more)
----------------------------------------------------------------------------------------------------------------
@V14
A small update..
Updated Linux kernel to latest 3.4.59.
Fixed power ON while charging.
Fixed charging led notification.
Removed force loaded exfat modules code and added exfat modules 1.2.4 compiled from source. (Thanks samsung)
Probably fixed random restarts.
Other changes for better stability and performance.
More to come....
----------------------------------------------------------------------------------------------------------------
@V15
Compiled with latest GCC 4.7 toolchain (Thanks to faux)
Added CPU governors: abyssplugv2 - adaptive - asswax - badass - dancedance - intellidemand - smartassH3 and wheatley. (Thanks to ktoonsez)
Added GPU governor: Simple (Thanks to faux)
Fixed app doesn’t load user settings after restart.
Added thermal control tweaks to app.
Added faux sound control tweaks to app. (Thanks to faux for sound control driver)
Added a function to auto backup efs to /sdcard/ausdim-kernel-data. (For safe)
Added a function to copy last_kmsg to /sdcard/ausdim-kernel-data. (For helping me)
Reworked whole app with other mini changes and now is fully working.
Other mini kernel changes for better stability and performance.
Note: Before flash the kernel please delete manually init.d scripts from /etc/init.d/ folder or by the Ausdim kernel manager app.
----------------------------------------------------------------------------------------------------------------
@V16
Fixed charging when device is off.
Fixed app re-installation after restart.
Fixed set minimum throttle mhz at app.
Removed some ondemand tweaks added at v15.
Removed wipe /cache and /dalvik-cache from the updater-script.
Thanks and sorry for that quick update.
Note1:The app is inside on ramfs at boot.img and is auto installed/update if it's needed or not allready installed when device reboot to os.
Note2: Before flash the kernel please delete manually init.d scripts from /etc/init.d/ folder or by the Ausdim kernel manager app.
----------------------------------------------------------------------------------------------------------------
@V17
Compiled with latest gcc 4.8 and -o3.
Cifs 4.2.x fix. (Now we have cifs tested and fully working. Thanks @andreasy for notice that and report it also thanks @mkasick for the actual fix)
Fixed that damn lag. (Huge thanks @nfsmw_gr for thousands tests and suggestions)
Reworked led notification driver.
Disable multicast on suspend. (Save battery if to many users is on same network. That damn wlan_rx_wake wake locks. Thanks @pi-xel to note that)
Latest linux kenrel 3.4.61.
Added zram as module.
Added dynamic sync control. (Thanks to @faux)
Added ktoonservativeq cpu governor. (Thanks @ktoonsez)
Added sysfs to make Gentle Fair Sleepers configurable via app.
Added some zram and swappines settings at my app (Thanks @nfsmw_gr) if you want more then you can use Turbo-Zram. (Thanks @rlorange)
Added Android Logger switch trough App. (Thanks @wanam)
Added a Knox security removal. (Thanks @wanam)
Kernel compression: xz (To reduce zimage size)
Some others here and there...
Note1:The app is inside on ramfs at boot.img and is auto installed/update if it's needed or not already installed when device reboot to os.
Note2: Before flash the kernel please delete manually previous init.d scripts from /etc/init.d/ folder or by the Ausdim kernel manager app.
----------------------------------------------------------------------------------------------------------------
@V18.1
This update is focusing to stability and performance.
Lot of changes time and reverts to be Completely Lag Free....
Latest Linux kernel 3.4.64.
Updated Tsp firmware (From MGG update3) You can check the current firmware by *#2663#
Updated Ssp firmware (From MGG update3) You can check the current firmware by *#2663#
Updated Wireless drivers (From MGG update3)
Zram no more loaded as module and has now 4 disks default.
Zram can now be disabled via my app.
Other thinks that i don't remember....
Again many thanks @nfsmw_gr and @pjbuser for trying many test kernel's
----------------------------------------------------------------------------------------------------------------
@V19
This update is focusing to stability and performance.
Latest Linux kernel 3.4.66.
Fix random reboots. (Need test)
Disabled ktoonsez auto_hotplug and add intelli_plug with eco mode by faux.
Many thanks @all for testing and patience.
----------------------------------------------------------------------------------------------------------------
Tip:
If for some reason after set extremely settings you cant boot then you have to run aroma file explorer from CWM recovery and delete the responsible script at /etc/init.d folder.
If for some reason you lost root after flashing my kernel then you can simply download Chainfire's UPDATE-SuperSU-v1.51.zip and install it via CWM like you did with the kernel.
You can use Trickster MOD Kernel Settings from playstore to under clock and play with voltages governors and gpu.
Millions of thanks to:
@nfsmw_gr (For helping me with the scripts/debug/tests realy great man)
@pjbuser (For many tests and suggestions)
@broodplank1337 (for his great help about git-hub really great and friendly developer) and @ktoonsez for his great work and
@faux123.
Source code:
https://github.com/ausdim/GE-Edition-I9505-jfltexx
.:.I you want to Donate me.:.
Make me a flashable ZIP
jamal2367 said:
Make me a flashable ZIP
Click to expand...
Click to collapse
Uploaded here...
Thank's
Thanks
i've flashed deodexed and not google edition's rom but i've problems with wifi... can i flash this? i come from MEA...
MTP working?
coolpix90 said:
i've flashed deodexed and not google edition's rom but i've problems with wifi... can i flash this? i come from MEA...
Click to expand...
Click to collapse
The kernel is compiled from 9505G sources.
Wifi is working.
If the wifi is not working in your device try to change the rom.
Thank's
ausdim said:
The kernel is builded from 9505G sources.
Wifi is working.
If the wifi is not working in your device try to change the rom.
Thank's
Click to expand...
Click to collapse
From which kernel did you take the ramdisk from?
I didn't find any i9505G Stock Kernel
nolinuxnoparty said:
From which kernel did you take the ramdisk from?
I didn't find any i9505G Stock Kernel
Click to expand...
Click to collapse
As i said to the first post the kernel is builded from I9505G sources released by Samsung and is packed with MF8 ramdisk.
Thank's
ausdim said:
As i said to the first post the kernel is builded from I9505G sources released by Samsung and is packed with MF8 ramdisk.
Thank's
Click to expand...
Click to collapse
therefore i need to go to MF8 then install GE rom and then your kernel right?
Flashed it but system wouldn't boot. Cleaned cache and dalvik and reflashed and now it boots.
You have to wipe cache and dalvik before or after flashing this.
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Oh... my....god! This kernel is magical! With ktoonsez kernel, I had roughly 15k i Antutu, but now I have 24k! Not that it means a whole lot but still. I'm stumped.
Theshawty said:
Flashed it but system wouldn't boot. Cleaned cache and dalvik and reflashed and now it boots.
You have to wipe cache and dalvik before or after flashing this.
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Oh... my....god! This kernel is magical! With ktoonsez kernel, I had roughly 15k i Antutu, but now I have 24k! Not that it means a whole lot but still. I'm stumped.
Click to expand...
Click to collapse
Thank's for that note..
ZIp reuploaded at first post and it will clear cache and dalvik.
Thank's
ausdim said:
Thank's for that note..
ZIp reuploaded at first post and it will clear cache and dalvik.
Thank's
Click to expand...
Click to collapse
This kernel's pure magic, mate! :good:
Not just the Antutu score is higher, things generally feel a lot more snappier now!
My S4 Google Edition is much better now, better temperature, is fresher now.
Thanks
I have also installed and working good and mtp working.
The camera with this kernel works fine?
felipepx said:
The camera with this kernel works fine?
Click to expand...
Click to collapse
Dude, really sorry but are you some kind of bot / complete moron? You've asked that exact question in basically every thread I've come across since yesterday. They all work, besides some auto-focus issues with night scene mode, which is rom-related I suppose.
slind said:
Dude, really sorry but are you some kind of bot / complete moron? You've asked that exact question in basically every thread I've come across since yesterday. They all work, besides some auto-focus issues with night scene mode, which is rom-related I suppose.
Click to expand...
Click to collapse
I'm just asking myself referring to these problems that were appearing since yesterday, I asked wondering if with this kernel everything is ok or if the problems continue ...
ausdim said:
This is a kernel compiled from GT-I9505G sources and packed with MF8 initramfs.
I suggest to use it with one Google Edition rom.
Is not something special, is a stock kernel i compile because i see some diff's between I9505 & I9505G sources..
Tested and working:
WiFi
Exfat with samsung forced to load modules
Cache & dalvik cache it will auto deleted at installation of the zip.
Thank's
Click to expand...
Click to collapse
Thanks.
Camera working fine here.
Related
[6.Aug.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.1.0-KRATOS ◄► Kernel v3.3.1 ◄►
DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )
Change log in second post.
ROM FEATURES
JPA Base Rom - ANDROID 2.3.3
Overcome kernel v3.3.1 included
No Modem is included - due to a variety of personal preference I decided to leave that a la carte
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Accurate battery mod with gingerbread styling
Blur removed across system (i.e. behind power option menu) - significantly improves performance
Power Off confirmation disabled
Screen off animation enabled
Overscroll Glow effect enabled
Added AppWidgetPicker
CSC set to XEU
Ads Blocked
Updated Market to 3.0.26
Updated Maps to 5.8.0
Flash Player removed due to compatibility issue - install from market and you'll be all set.
Updated GMail to 2.3.5
Updated YouTube to 2.1.6
Updated SamsungApps to 2.5.039
Updated StreetView to 1.6.0.6
Updated Thinkfree Office Suite
Removed Startup/Shutdown sounds
Cool boot animation
A2DP Bluetooth Connection Fix Integrated
SIP calling enabled over 3g AND WiFi
Fugutweaks integrated
Browser mods (enabled "Default Zoom" in settings, added "User Agent" in settings, set plugins to "on demand" by default)
KERNEL FEATURES
Support RFS/EXT2/EXT3/EXT4
OC/UV with these steps: 1.6ghz, 1.5ghz, 1.4ghz, 1.3ghz, 1.2ghz, 1ghz, 800mhz, 600mhz, 400mhz, 200mhz, 100mhz
Replaced kernel jhash2 with jhash3
Adjusted kernel HZ value to improve smoothness
Optimized lowmemorykiller values
Optimized compiler flags
Voodoo Sound v10 (courtesy of supercurio)
Voodoo Lagfix (courtesy of supercurio)
Overcome CwM Recovery v4.1.1.4 (Custom built Clockworkmod v4.0.1.4)
Full support of internal/external SD cards in Recovery
V(R) scheduler added and set as Default
Kernel tweaks to VM and Scheduler for better performance
Built in CIFS/TUN/SlowWork support
Touchscreen Undervolted (courtesy Koxudaxi)
RAM Undervolted
Stochastic Fair Blue (SFB) Network Scheduler
Autogroup Scheduler
Asynchronous I/O Enabled (AIO)
Backlight Notifications (Thanks to Neldar for the mod and Koxudaxi for the patch)
INSTALL GUIDE
http://p1000.teamovercome.net/?page_id=64
DOWNLOADS
http://p1000.teamovercome.net/?page_id=558
TIPS AND TWEAKS
http://p1000.teamovercome.net/?page_id=68
FAQ's
http://p1000.teamovercome.net/?page_id=66
SOURCES
https://github.com/alterbridge86
The best is yet to come!
ROM AND KERNEL CHANGE LOG
http://www.teamovercome.net/?page_id=171
Overcome v3.1.0-KRATOS
Overcome Kernel v3.3.1 Included
XWJPA Base
1080p Streaming Flash now smooth as butter
Wifi reconnect bug fixed (thanks to source built wpa_supplicant from disguztipated)
Updated Google Talk client with fully functioning one (identical to 2.3.4)
Updated Gmail to 2.3.5
Overcome Kernel v3.3.1
Overcome CwM Recovery Updated to v4.1.1.4 (Upstream fixes and enhancements)
Overcome CwM Recovery Updated to v5.1.2.6 (Upstream fixes and enhancements)
Nandroid backup fixed so that it does not require an external sd card in the device.
Nandroid restore fixed so that it does not corrupt kernel in restore process (note this will likely require a new backup with the new recovery as well)
Reverted lowmemkiller change which may have been blocking kswapd0 from sleeping, resulting in battery leakage.
Numerous upstream patches enhancing overall stability and performance
Smartass governor upgraded to SmartassV2 by Erasmux
Touchscreen sensitivity tweaked
Oh wow !!!
Oh wow !!!
Thanks Overcome team you are the best
alterbridge86 said:
ROM AND KERNEL CHANGE LOG
http://www.teamovercome.net/?page_id=171
Overcome v3.0.1-JUPITER
Overcome Kernel v3.3.1 Included
XWJPA Base
1080p Streaming Flash now smooth as butter
Wifi reconnect bug fixed (thanks to source built wpa_supplicant from disguztipated)
Updated Google Talk client with fully functioning one (identical to 2.3.4)
Updated Gmail to 2.3.5
Overcome Kernel v3.3.1
Overcome CwM Recovery Updated to v4.1.1.4 (Upstream fixes and enhancements)
Numerous Upstream improvements
Updated config_hz and user_hz to improve smoothness
Optimized compiler flags
Set V(R) Scheduler as default
Click to expand...
Click to collapse
Should say
Overcome ROM v3.1.0-KRATOS
: P
Apologise ab, tried link again and its downloading. Hats off and looking forward to it yet again.
http://mfmaju.com/cgi-sys/suspendedpage.cgi
This Account Has Been Suspended
The stock patch....its ot full stock "no battery %...etc " or gold like stock patch that we loved
Oh and thx overcome team
__coma__ said:
http://mfmaju.com/cgi-sys/suspendedpage.cgi
This Account Has Been Suspended
Click to expand...
Click to collapse
Keep trying, it will work
Just giving a run out just now. Looking good so far. Thanks Ab & thepittbull.
__coma__ said:
http://mfmaju.com/cgi-sys/suspendedpage.cgi
This Account Has Been Suspended
Click to expand...
Click to collapse
Checking in to that - that is a mirror from one of our users...will remove it from the links for now so people stop getting that error, but as mentioned by another user, try again and the download manager will assign another server
wakady said:
The stock patch....its ot full stock "no battery %...etc " or gold like stock patch that we loved
Oh and thx overcome team
Click to expand...
Click to collapse
It is the "mostly stock" stock patch lol. There is battery %, overscroll glow, and tv-off animation, but thats it. Everything else stock themed.
thanks....team
great job AB
thanks again
Thanks for your work AB new kernel updates look great!
About the customisations...
Hey guys,
Since we've decided to go the "extra mile..." with this release, please let us know how you feel with the polls I've created here...
About the bootanimation:
http://teamovercome.net/forums/index.php?topic=139.0
About the wallpapers:
http://teamovercome.net/forums/index.php?topic=140.0
and
http://teamovercome.net/forums/index.php?topic=141.0
Your feedback will help us gauge what will be included in the next release!
Thanks and enjoy!
tpb
Fantastic! ! Loving your superb efforts, release names, aaannddd making new thread for new release.
You guys are the coolest team. . .
. . . i use xda app for gtab. . .
Downloading now.
TPB, you need to fix up the 2nd poll, the title asks if we like the new wallpaper but then the question inside the thread itself asks if we like the new boot animation again ;-P
Thx m8
Love your work, but will skip this version.
Just flash jupiter 2 weeks ago
Sent from my GT-P1000 using Tapatalk
ashdragon said:
Downloading now.
TPB, you need to fix up the 2nd poll, the title asks if we like the new wallpaper but then the question inside the thread itself asks if we like the new boot animation again ;-P
Click to expand...
Click to collapse
Thanks! Fixed!
You guys...
No wipe from Jupiter to Kratos, without problem!
Bravo et merci ;-)
Sent from my GT-P1000 using Tapatalk
[06.JAN.12][ROM/KERNEL][GSM] ♫ Overcome 7 Series v4.1.0 ♫ Overcome Kernel v4.0.0 ♫
DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )
Change log in second post.
ROM FEATURES
P1000XWJQ8 Base Rom - ANDROID 2.3.6
Overcome Kernel 4.0.0 included
No Modem is included - due to a variety of personal preference I decided to leave that a la carte
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Accurate battery mod
Blur removed across system (i.e. behind power option menu) - significantly improves performance
Power Off confirmation disabled
Screen off animation enabled
Overscroll Glow effect enabled
Screen on animation enabled
Added AppWidgetPicker
CSC set to XEU
Ads Blocked
Updated Market to 3.4.4
Updated Maps to 6.0.3
Flash Player removed due to compatibility issue - install from market and you'll be all set.
Updated GMail to 2.3.5.2
Updated YouTube to 2.2.16
Updated SamsungApps to 2.6.046
Updated StreetView to 1.6.0.6
Updated Thinkfree Office Suite
Removed Startup/Shutdown sounds
Cool boot animation
A2DP Bluetooth Connection Fix Integrated
SIP calling enabled over 3g AND WiFi
Fugutweaks integrated
Browser mods (enabled "Default Zoom" in settings, added "User Agent" in settings, set plugins to "on demand" by default)
KERNEL FEATURES
Support RFS/EXT2/EXT3/EXT4
OC/UV with these steps: 1.6ghz, 1.5ghz, 1.4ghz, 1.3ghz, 1.2ghz, 1ghz, 800mhz, 600mhz, 400mhz, 200mhz, 100mhz
Replaced kernel jhash2 with jhash3
Adjusted kernel HZ value to improve smoothness
Optimized lowmemorykiller values
Optimized compiler flags
Voodoo Sound v10 (courtesy of supercurio)
Voodoo Lagfix (courtesy of supercurio)
Overcome CwM Recovery v5.1.2.6 (Custom built Clockworkmod v5.0.2.6)
Full support of internal/external SD cards in Recovery
V(R) scheduler added and set as Default
Kernel tweaks to VM and Scheduler for better performance
Built in CIFS/TUN/SlowWork support
Touchscreen Undervolted (courtesy Koxudaxi)
RAM Undervolted
Stochastic Fair Blue (SFB) Network Scheduler
Autogroup Scheduler
Asynchronous I/O Enabled (AIO)
Backlight Notifications (Thanks to Neldar for the mod and Koxudaxi for the patch)
INSTALL GUIDE
http://www.teamovercome.net/p1000/?page_id=17
DOWNLOADS
http://www.teamovercome.net/p1000/?page_id=21
MIRRORS
GB-Stock-Safe-v5.zip - http://www.multiupload.com/NKB3NWGHFA
Overcome_7_Series_v4.1.0_Wipe.zip - http://www.multiupload.com/ELU4SZD9R1
Overcome_7_Series_v4.1.0_NoWipe.zip - http://www.multiupload.com/F0PCXLAT4T
Overcome_Kernel_v4.0.0.tar - http://www.multiupload.com/OR2C6MEHR6
Overcome_Kernel_v4.0.0.zip - http://www.multiupload.com/D1Y1K1U69W
Modem-JK3.zip - http://www.multiupload.com/DZA62M0QFH
Modem-JMF.zip - http://www.multiupload.com/9FYBMLFWGV
Modem-JPZ.zip - http://www.multiupload.com/3RIJ9JBU1H
Modem-TMO.zip - http://www.multiupload.com/O6MFE5MKS8
Overcome_7_Series_v4.1.0_Stock_Theme_Patch_v2.zip - http://www.multiupload.com/61CJ4GPA5I
RTL-Arabic-Shaping-Patch - http://forum.xda-developers.com/showpost.php?p=21118999&postcount=704 (Thanks Isherif!!)
Removed_Apps_v4.1.0 - http://www.multiupload.com/8C1PW9B57Q
SOURCES
https://github.com/alterbridge86
The best is yet to come!
ROM AND KERNEL CHANGE LOG
Overcome 7 Series 4.1.0
Overcome Kernel v4.0.0 Included
Rebase on P1000XWJQ8 (Android 2.3.6)
Updated Maps to 6.0.3
Updated Market to 3.4.4
Screen ON animation enabled
ICS animations added (note these will only fully work with a launcher OTHER than the TwLauncher such as ADW)
Overcome 7 Series 4.0.0
Overcome Kernel v4.0.0 Included
Fixed additional confirmation on shutdown
Updated Gmail to 2.3.5.2
Updated Maps to 5.10.1
Updated SamsungApps to 2.6.046
Updated YouTube to 2.2.16
Updated Market to 3.2.0
Build.prop tweaks to enhance smoothness
Small theming fixes
Roboto Font
Overcome 7 Series Kernel v4.0.0
Overcome CwM Recovery Updated to v5.1.2.6 (Upstream fixes and enhancements)
Nandroid backup fixed so that it does not require an external sd card in the device.
Nandroid restore fixed so that it does not corrupt kernel in restore process (note this will likely require a new backup with the new recovery as well)
Reverted lowmemkiller change which may have been blocking kswapd0 from sleeping, resulting in battery leakage.
Numerous upstream patches enhancing overall stability and performance
Smartass governor upgraded to SmartassV2 by Erasmux
Touchscreen sensitivity tweaked
THIS ->
Oh Wooowww!!!
On behalf of Pharaohnough
Oh wow !!!
;-)
is it fast enough?! Quadrant score?
rochi said:
is it fast enough?! Quadrant score?
Click to expand...
Click to collapse
Performance is very similar to the previous release - this is mostly just bug fixes and such.
can i just flash this thru cwm? or restock is essential?
Sent from my GT-P1000 using XDA App
rochi said:
is it fast enough?! Quadrant score?
Click to expand...
Click to collapse
was it even slow to start with? why don't u test and let us know.
rochi said:
is it fast enough?! Quadrant score?
Click to expand...
Click to collapse
It's actually darn slow... Quadrant scores of only in the low hundreds in my tests of a thousand runs done just for you... ;-)
Sent from my Overcome-Powered Tab!
pat19 said:
can i just flash this thru cwm? or restock is essential?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
if you're coming from previous overcome just flash non-wipe via cwm.
kay_kiat88 said:
if you're coming from previous overcome just flash non-wipe via cwm.
Click to expand...
Click to collapse
ok. thanks.
Sent from my GT-P1000 using XDA App
at this time there is an Database Error i cant download anything...
downloading right now.
Thanks again for an other update of your perfect work!!!!
Looks like the website is down for now. But my biggest question is does this fix the issue with large apps in the market? That one was pain in the but. other than that look forward to how this one runs.
Thanks alot AB a long wait really Btw your web database error cnt download...
still...
Error establishing a database connection
Please be patient as they are probably uploading/updating posts.
It is really nice to see you guys still maintaining your release, specially this one
Reverted lowmemkiller change which may have been blocking kswapd0 from sleeping, resulting in battery leakage.
Website is back up - sorry about that!
Finally It's UP,i am now downloading
Please please PLEASE tell me that the damn media scanning on every reboot is gone
Gonna try it after charging my tab a bit...
THIS KERNEL IS NOW OBSOLETE, DON'T USE IT.
Mine newest and stable kernel releases are now integrated into my version of CyanogenMod 7.2, please use only a kernel provided with that ROM, not this one.
Im leaving it for historical reason or for some geeks
The testing release of kernel for p350 based on kernel by drapalyuk - taken from kernel and rom + sources
I do not take any resposibility for bricked devices!
This kernel aims to optimize the performance, responsivity and battery life so please share your opinion about these factors and your ideas.
If you are experiencing any problems with WiFi or 3G try much less tweaked but more stable LITE version.
Instalation:
Download zip to your phone
Get the Custom Recovery for p350
Reboot into recovery
Backup your boot partition (if you like risk you can ommit this step )
Choose Flash zip menu
Turn off verification (as I dont signed my kernel yet)
Flash downloaded zip
Reboot and enjoy
Changelog(2.6.32.48 version):
[0.4]
Fixed black screen after wakeup issue
Added vr and sio I/O schedulers (SIO is default)
Added smartassv2 governor
VM_MAX_READAHEAD changed to 512
[0.3]
Kernel version updated to 2.6.32.48
BFS CPU Scheduler
Applied few tweaks from https://github.com/arco/buzz-kernel-2.6.32/
Some other small tweaks (List of applied patches is on github)
Compiled with newest Linaro toolchain with -Ofast flag and tuned to our architecture
LITE version:
For all guys having problems with internet connection on my kernel there is a LITE version.
It contains less tweaks thant normal version but should not have problems with internet. This version is much less tweaked so it should be more stable.
What is in lite version:
Kernel version 2.6.32.9 (not updated)
Smartass v2 governor
SIO and VR IO schedulers (SIO as default)
VM_MAX_READAHEAD changed to 512
Compiled with newest Linaro toolchain with -Ofast flag and tuned to our architecture
If you dont have any problems with 0.4 version I reccomend NOT to install Lite version
DOWNLOADS
version v0.4: http://hotfile.com/links/139705983/d792c47/kernel-pax-0-4.zip.html
version Lite: http://hotfile.com/links/139705851/518d0ef/pax0r-kernel-lite.zip.html
SOURCE: https://github.com/pax0r/pecan_kernel
Thx for:
drapalyuk - for biggest work for this device
All other devs for Android kernel - as I can learn so much from all of your work!
Debuging Info
or how to help make it better
If you have any problems with my kernel and you want to help in some way - here it is some info how you can.
Just after apearing of the problem please get logs from your device.
How to do it:
Info on CM wiki how to get Logcat
http://wiki.cyanogenmod.com/wiki/Logcat
Info about getting kmesg:
Open Terminal Emulator (or shell with ADB if you know how)
Write the following commands:
Code:
su
cat /proc/kmsg > /sdcard/kmsg.log
There should be new file kmsg.txt on your sdcard. Copy it to your PC.
info about last kmsg after sudden reboot/crash
Same as for normal kmesg but the command now should be:
Code:
su
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Created file will be named last_kmsg.txt
Attach all logs to your post (prefered way is to use http://pastebin.com/
Of course if you have any programming skills you can tinker with my sources as you wish and send patches to me
Hi Pax0r,
I will test the new kernel!
Great, file not found
Sent from my Optimus Me using XDA App
thanks from the Philippines bro..
downloading it now.. will let you know how it goes..
edit : just booted up and already like it.. i had a problem with drape's rc3 kernel because everytime my phone went to sleep and i would wake it up, the screen would just stay black and the buttons would light up and i would have to touch the screen for it to turn on.. now that problem is history!!! thanks paxor!!!!
SikatPimp said:
edit : just booted up and already like it.. i had a problem with drape's rc3 kernel because everytime my phone went to sleep and i would wake it up, the screen would just stay black and the buttons would light up and i would have to touch the screen for it to turn on.. now that problem is history!!! thanks paxor!!!!
Click to expand...
Click to collapse
i still experience that problem. well after the kernel's flashed, does that mean it will run the next time the phone's booted up?
downloading...
edit:screen stays black like before..
uploaded to mediafire
Daryll99 said:
Great, file not found
Sent from my Optimus Me using XDA App
Click to expand...
Click to collapse
here..i uploaded it to mediafire. enjoy
www . mediafire . com/ ?l5cqpdhvi8c8acw
ikazu said:
i still experience that problem. well after the kernel's flashed, does that mean it will run the next time the phone's booted up?
Click to expand...
Click to collapse
ok i just got excited. it seems i still get the touch screen problem but it happens less frequently now and right now i am also cruising at 825 mhz with no fc yet !!!
SikatPimp said:
ok i just got excited. it seems i still get the touch screen problem but it happens less frequently now and right now i am also cruising at 825 mhz with no fc yet !!!
Click to expand...
Click to collapse
tried playing games with 825 freq?
---------- Post added at 05:23 AM ---------- Previous post was at 05:21 AM ----------
on screen animation dsnt work either
Thx for feedback.
I also noticed the 'black screen issue' sometimes and working on it. Drapalyuk fixed it in CM but its not in his sources :/
What versions of ROM (CM, 2.2 etc) do you use?
only angry birds... can't tell any difference but still no fc
---------- Post added at 02:17 PM ---------- Previous post was at 02:08 PM ----------
I'm using drape's 20.10 rom... and before i would reflash to try and get that black screen took care of but in a couple days it would come back.. and it isnt so bad.. it doesn't really effect anything.. but after flashing your kernel i am getting them less now so thats a plus..
So you know How to compile the kernel
will you try to add more features ???
can you add these features
Code:
* shifted to TinyRCU kept it as default
* enabled support for various file systems
o EXT3
o EXT4
o JBD
o RFS
o JFS
o NTFS (with R/W)
* TUN/TAP now integrated into kernel
* enabled support for various network file systems
o NFS (client/server)
o CIFS
* optimized kernel for size
* enabled LZMA/GZ2/LZO compressing support for ramdisk
* bumped jHash to v3
* increased VM MAX READAHEAD to 512KB
* corrected "current kernel" string in CWM app & Tweaks app
* Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
* CPU Governors
1. InteractiveX
2. Savaged-Zen
3. SmartAssV2
4. BrazilianWax
5. Smoothass
6. Lagfree
7. Smartass
8. Scary
9. MinMax
10. Interactive
* I/O Schedulers
1. BFQ-v2-rc1
2. V(R)
3. SIO
I flashed the kernel and now everytime i try to turn on the wifi its says error, it wont turn on. And please fix the blackscreen issue.
Daryll99 said:
I flashed the kernel and now everytime i try to turn on the wifi its says error, it wont turn on. And please fix the blackscreen issue.
Click to expand...
Click to collapse
Maybe try flash again.
If it would not work I will check on this issue later.
There must be some problem with loading wifi module for your phone...
vivekkalady said:
So you know How to compile the kernel
will you try to add more features ???
can you add these features
Code:
* shifted to TinyRCU kept it as default
* enabled support for various file systems
o EXT3
o EXT4
o JBD
o RFS
o JFS
o NTFS (with R/W)
* TUN/TAP now integrated into kernel
* enabled support for various network file systems
o NFS (client/server)
o CIFS
* optimized kernel for size
* enabled LZMA/GZ2/LZO compressing support for ramdisk
* bumped jHash to v3
* increased VM MAX READAHEAD to 512KB
* corrected "current kernel" string in CWM app & Tweaks app
* Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
* CPU Governors
1. InteractiveX
2. Savaged-Zen
3. SmartAssV2
4. BrazilianWax
5. Smoothass
6. Lagfree
7. Smartass
8. Scary
9. MinMax
10. Interactive
* I/O Schedulers
1. BFQ-v2-rc1
2. V(R)
3. SIO
Click to expand...
Click to collapse
I will try do as much as I can - thx for some kind of list of 'thigs I should look at'. Few comments I have:
About governors - there will be smartass v2 for sure in next version - I just hadnt time to integrate it in this release (I tested it earlier at it really was smartass )
I/O Schedulers - deadline is quite enough for sd cards, but I will look into this SIO as it is based on deadline - thx for hint. I think rest of them is not needed.
File Systems - do we really need support for them? More supported format means bigger kernel.
"optimized kernel for size" - I prefer optimize for speed and it is done
Thanks again for this list - looks very interesting
Havent find the Governer in the cyanogen Mod ??
do I have to use external apps to select that governer??
edit : wifi working Fine
vivekkalady said:
Havent find the Governer in the cyanogen Mod ??
do I have to use external apps to select that governer??
edit : wifi working Fine
Click to expand...
Click to collapse
The governor does not come with the cyanogen mod ofLG p350. No you can't use external apps to install that governor,assuming it is smartass
Sent from my Optimus Me using XDA App
pax0r said:
File Systems - do we really need support for them? More supported format means bigger kernel.
Click to expand...
Click to collapse
It would be great if ntfs file system is supported as it is fast
Sent from my Optimus Me using XDA App
Daryll99 said:
The governor does not come with the cyanogen mod ofLG p350. No you can't use external apps to install that governor,assuming it is smartass
Sent from my Optimus Me using XDA App
Click to expand...
Click to collapse
I know that Dude
But we need external apps to select which Governer and I/O scheduler to be used even if it is in the boot.img. Not installing but selecting
no-frill app is used in my phone (i9003) it contains all the above items in the list i have specified earlier
Its from i9003 by doomload it contains all the things
https://github.com/DooMLoRD/SGS-SL-i9003
Hm... I can select governor from CM menu (performance -> CPU settings - not sure about english names ; ) but be aware of a fact that there is no smartass here (yet ), just standard ones (ondemand,usersapce,powersave,performance)
Sadly your kernel from i9003 is .35 one an here we have .32 so patches do not apply so easy...
But when I will have more time (Im in the middle of Bsc thesis ) I will try to port some .35 kernel for p350
StockMOD Kernel for D802 international phones
Suitable for Official LG and LG-based roms ONLY
Only for D802 International models
Features:
- ExFAT support for USB OTG / Card readers with large drives
- CIFS network share mounting supported
- Voltage control support (no built in UV, but configurable via apps like SetCPU)
- Optimised kernel libraries
- MSM SoC + Kernel "always-on" logging and debugging disabled to save CPU cycles
- Simple GPU governor
- Ondemand governor tweaked for lower latency speed shift changes
- Internal kernel function fixes (ie, memory leaks, scheduler fixes)
- SIO scheduler (default, noop, cfq and ROW are available)
- high performance, low latency kernel
- compiled with Os flags and neon-vfpv4 FPU enabled
- Westwood+ TCP congestion control
- Built from official LG v10a kernel source
- Lokified during flash
Installation:
- Download .zip and copy to phone
- Reboot to recovery
- Recommended to take full system backup, including EFS partition
- Flash .zip
- Reboot
- 1st reboot may take a little longer than usual
Please do not:
Do not ask for other models to be supported, at this time is D802 only. Other models may follow in the future
Do not ask for extra features. This is to be a stock-compatible replacement kernel only. If LG didn't add it, I probably wont either.
Do not ask for support of other roms, such as CM / AOSP. Im a LG based rom user, if you want a kernel for another type of rom either use one of the available ones we already have or learn to compile your own.
Download
Download the kernels from my FTP here > FTP Directory
Archive of older versions https://app.box.com/s/k8prx3pyxgd866aidd9x
Changelog:
v3.00
- Carefully rebased, some previously used commits removed
- Back to O2 compression
- (most of) Viking's Ondemand governor settings preapplied
- Added init.d script support
- Fixed battery drain and temperature issue some had
- Reverted to a more stock-like config for less issues
v2.60
- Reverted all VM and ramdisk changes, back to kernel defaults
- Reverts most ramdisk changes, rebuilt from fresh stock ramdisk dump
- Should fix android and network logging
- Decreased Ondemand CPU frequency shift latency to 8ms
- Removed some GPU logging functions
- Stock GPU governor is default
- Full neon-vfpv4 FPU optimisations
- Fixed 3d game problems some had with 2.20+beta 2.50
v2.20
- Some configuration changes
- Some minor system tweaks
- Firewall logging re-enabled
v2.06
- Cleaned up ramdisk
- Sensible, well tested VM and Ondemand values set during boot
- CIFS network mount support added
- Increased vibrator strength
- CPU Sync (idle before rampdown) frequency increased to 1190mhz (default is 960mhz, battery life / heat seem virtually unaffected)
- Simple GPU governor set as default (no longer needs manual activation)
- 99% kernel debugging and logging now disabled. (Android logger still available)
- Ondemand governor is recommended
v2.03
- Once again a complete rebuild
- Fixed CPU utilisation issue with v2.00
v2.00
- Rebuilt from scratch (code cleanup)
- Switched to full neon-vfpv4 compiler flags for fpu
- Switched to Google GCC 4.8 toolchain
- Switched to O2 optimisation level
v1.03
- Fixed audio interference on headset
- Improved UI smoothness
- Faster boot
v1.02
- Added Westwood+ TCP congestion control
- Disabled more debugging and logging for adreno and krait cpu
- More internal fixes
v1.01
- More internal kernel fixes
- Reduced minimum CPU voltage than is user configurable to 700mv (default voltages are unchanged)
- Disabled some ramdisk controlled LG specific logging and debugging (more CPU cycles saved)
v1.00
- First release
Sources:
Kernel sources github > Kernel Github
Ramdisk + Build script > Ramdisk Github
Credits and thanks:
- LG
- Wootever (for loki flash scripts and binaries, and some elements of the build script)
- Faux123, Gokhanmoral, franciscofranco and the CM team for some commits
If you want to return to the original D802 10b International kernel please download and flash the zip attached to this post
reserved2
Hi,
Yeah!
Glad to to have been a tester
Thanks for your kernel! This one looks great
viking37 said:
Hi,
Yeah!
Glad to to have been a tester
Thanks for your kernel! This one looks great
Click to expand...
Click to collapse
thank you for being a patient tester! your feedback was appreciated, as well as the time you have been testing it for me. :good:
g.lewarne said:
thank you for being a patient tester! your feedback was appreciated, as well as the time you have been testing it for me. :good:
Click to expand...
Click to collapse
Re,
You're welcome
I just saw that you had added SIO i/o scheduler, thanks for this... It has always worked well for me, I mean for my devices
viking37 said:
Re,
You're welcome
I just saw that you had added SIO i/o scheduler, thanks for this... It has always worked well for me, I mean for my devices
Click to expand...
Click to collapse
ah yes, thanks for the reminder, will add that to OP
I have flashed this kernel combined with your ROM and so far so good.
Love the rom. Trying the kernel!.
Sent from my LG-D802 using Tapatalk
Bootloop after installing kernel.
Sent from my LG-D802 using Tapatalk
gentlemandroid17 said:
Bootloop after installing kernel.
Click to expand...
Click to collapse
Hi,
Weird, no issue here. You are the first
Maybe a bad download?
EDIT: you are on LG based rom, right?
Agreed. Flashed on Rayglobe 2.6 about 2 hours ago and have been running fine since.
Sent from my LG-D802 using Tapatalk
I also have Bootloop after installing kernel.
installed on the : [ROM][Stock][LG-G2 D802 international] StockMOD rom, Fast, Fluid, Lagfree - v1.06
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Are you guys running any "set xxx parameter on reboot" type of apps ?
I've been flashing these kernels, as have my esters for nearly a week and have not had any issues with them. The only thing I can think is you have an app which is trying to do something on boot up....
My phone was stock fresh, full wiped, installed my rom, then all the test kernels and 0 issues
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Click to expand...
Click to collapse
I just tested, no bootloop after reboot...
You have not flash something else (a tweak or a mod) or modifying something? Undervolt (too much and set on boot)?
I don't know, maybe wait g.lewarne...
viking37 said:
I just tested, no bootloop after reboot...
You have not flash something else? A tweak/mod? Undervolt (too much and set on boot)?
I don't know, maybe wait g.lewarne...
Click to expand...
Click to collapse
im starting to wonder if there are some subtle phone hardware variations that we are not aware of... ? (and im not talking 16/32gb since kernel is the same according to LGs sources)
either that or its is some app installed trying to do something funky....
@ g.lewarne, exept the CPU binning, I don't know
viking37 said:
@ g.lewarne, exept the CPU binning, I don't know
Click to expand...
Click to collapse
IKR
I mean, in Wootevers kernel thread there have been similar reports of sporadic non-compatability and although our kernels are quite different, the basic hardware controlling bits are the same. Even if the SoC had different variations, why would the stock LG kernel work for everyone when one built from their own source wont ?
Its either an app, or the sources LG share are not the "real" ones they use, which I have some suspicions about for other reasons
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
is your phone a branded phone ?
UPDATE: I really no longer have the time to update the custom kernels, I now work 16 hours days, 5-6 days weekly. With travelling time added, I barely have time to sleep.
Battery optimization is about choosing the right rom, tuning cpu governor interactive, disabling Google Play Services (use microG & tune GCM), forcing doze immediately, disabling ads, using black/white screen, app optimization (disable analytics, instant messaging), plus many other things.
Identify the rom, the base (aosp or lineage), can choose to use any of the kernels below if it is based on the same base. A backup of your original rom's kernel is in the rom.zip file, simply extract it and restore if encounter any problems.
I have created a guide here
(Please don't quote the original 1st post when replying, as everything is in progress, not written yet,
Please don't ask for ETAs, I'm only doing this in my limited spare time, thank you)
My kernels are NOT flash-and-forget, please READ through post #1, then CONFIGURE using Kernel Adiutor Mod (see post #2)
IMPORTANT DISCLAIMER
I bear no responsibility towards any malfunction of your device. Use my kernels at your own risk.
I do NOT own any of the devices below, so I could not flash/test any of the kernels
BACKUP YOUR PARTITIONS!!!
Before attempting to flash any kernel/rom, backup your critical partitions! It's meaningless to ask for help when disaster strikes. Follow the links below, root is required.
Partition Dump - Complete STEP 1
Partition Backup by wanam (save as both .img & tar.gz, plus the 1st 100MB - see 'spanner tool')
There's no need to backup the System or Data partition if you just want to backup the partitions only. But backup your SDCard if the rom got problems with it.
Credits & Thanks
abhishekr700 | source
kaankulahli | source
For Z00ED & Z00RD variants only, meaning these kernels are for Asus Zenfone 2 Laser models
- ZE500KG
- ZE500KL
Change Log (v06 SDCard fix)
v06
added SDCard Filesystem support
v05
added cpu hotplug: autosmp
v04
added USB Fast Charge, credits to @ENGstk
v03
removed CRC Check for 30% Performance Boost
v02
added SeLinux: Set to permissive
v01
added tcp-algorithm: westwood (default), bic, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois
added memory: samepage merging, frontswap, cleancache
added filesystem: ntfs
added config: kernel config.gz can be found at /proc
removed hotplug: msm performance
removed cpu: touch boost
v00
same as stock boot.img from rom
DOWNLOAD
Unzip, copy to phone, then flash kernel via TWRP (select BOOT partition), re-flash SuperSU if you use it, reboot directly.
(Note: if you need to revert to original kernel, either use :
v00 of my kernel - its the same as your stock rom boot.img,
or extract boot.img from the rom)
If you use Magisk, refer to this thread 1st post - Installation Instructions, section "If you're not rooted, or something went wrong and you need a clean start"
Nougat
LineageOS-based AICP-12.1 Nougat, latest kernel is v06 for ROM aicp_Z00ED_n-12.1-NIGHTLY-20170301.zip
Kernel Source
After flashing kernel, configure using Kernel Adiutor Mod
reserved 02
reserved 03
reserved 04
pokipokipxorn said:
After flashing kernel, configure using Kernel Adiutor Mod
Click to expand...
Click to collapse
There is no cpu hotplug section on kernel adiutor mod
AltMailey said:
There is no cpu hotplug section on kernel adiutor mod
Click to expand...
Click to collapse
cpu hotplug on my device is there,bro ,
maybe u try download other version apk again
Adhe_88 said:
maybe u try download other version apk again
Click to expand...
Click to collapse
Which version? I use V15 version but still doesnt appear
Even on playstore version too
My phone is Z00RD
Where cpu hotplug ? :laugh: or not work at Z00RD ?
Where's the download link?
..
rawstar11 said:
..
Click to expand...
Click to collapse
v06
There is no CPU Hotplug in settings
It's Work only with aicp_Z00ED_n-12.1-NIGHTLY-20170301.zip? @pokipokipxorn
For Z00UD plz?.. z00t I'm using rr nougat
hi there,
on aicp 20170804 sd card can be seen only on file manager but other programs and also on windows mount only internal memory shown or mounted. any related on kernel?
thnx
Have you abandoned Z00LD kernel??