NOT WORKING. COMPILING RESOURCES ON BUILDING FROM SOURCE. DON'T DOWNLOAD UNTIL X IS DELETED FROM TITLE. SORRY!!!!
OMG 4.3 CUSTOM ROM! TYBG!
Custom 4.3 Rom I tried to put together. If there are any kinks and what not, please tell me. It's my first rom so don't go too harsh on me. I used XenonHD as a base and changed a few things, . Special thanks to the XenonHD crew (Team Horizon) for the rom to build on and kevdliu for the initial 4.3 rom!
Also, make sure to do a nandroid back up.
Download
http://d-h.st/E2T
Download Gapps:
Dev-Host: http://d-h.st/UDe
Source: http://forum.xda-developers.com/show...38&postcount=1
*** Goo.im Gapps for 4.2.2 did not work. Use other Gapps at your own risk! ***
) Download SuperSU:
Dev-Host: http://d-h.st/7KB
Source: http://download.chainfire.eu/340/Sup...30625-1.41.zip
Instructions
clear cache, dalvik, and data
flash rom
flash gapps
flash SuperSU
when it says disable recovery flash select no
???
profit!
"We are not responsible for your device! We do not guarantee that everything will work the way it's supposed to. Not every device is created equal, what might work on our devices may not work on yours or vice versa. Please be a responsible person when it comes to flashing. This is a mature site, don't act immaturely when your device becomes problematic. If you cry and blame us for "destroying" your device, we will laugh at you. Your device is your responsibility, act like it.
Thanks for choosing Team Horizon, we hope you enjoy our works as much as we enjoy working with them." - Team Horizon
Downloading now! Any screenshots?
Sent from my AOSP on Toro using Tapatalk 4 Beta
Terrell1433 said:
Downloading now! Any screenshots?
Sent from my AOSP on Toro using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hold up, I'll get some up right now...
Enter The Nexus said:
Hold up, I'll get some up right now...
Click to expand...
Click to collapse
Sweet! Did you get exchange services working or are they not included? I know on stock ROM they force close.
Sent from my AOSP on Toro using Tapatalk 4 Beta
Downloading~
Flashing ASAP :fingers-crossed:
Installation aborted?
For some reason, I'm getting an installation aborted. Don't flash until further notice, as I'll try to be fixing this.
Enter The Nexus said:
For some reason, I'm getting an installation aborted. Don't flash until further notice, as I'll try to be fixing this.
Click to expand...
Click to collapse
Got the same error.
Sent from my AOSP on Toro using Tapatalk 4 Beta
Terrell1433 said:
Got the same error.
Sent from my AOSP on Toro using Tapatalk 4 Beta
Click to expand...
Click to collapse
yeah me too
Just redo the zip, it went into a folder in / of the zip. I am moving files quick to see if that works
Sent from my Galaxy Nexus using Tapatalk 4 Beta
ironfisted said:
Just redo the zip, it went into a folder in / of the zip. I am moving files quick to see if that works
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks man, it would be nice to find my error.
Sent from my AOSP on Toro using xda app-developers app
Enter The Nexus said:
Thanks man, it would be nice to find my error.
Sent from my AOSP on Toro using xda app-developers app
Click to expand...
Click to collapse
well i did that and it flashed but its a non booter
ironfisted said:
well i did that and it flashed but its a non booter
Click to expand...
Click to collapse
I left my computer so I can't see what the problem is. Did the "installation failed" error come up?
Sent from my AOSP on Toro using xda app-developers app
Enter The Nexus said:
I left my computer so I can't see what the problem is. Did the "installation failed" error come up?
Sent from my AOSP on Toro using xda app-developers app
Click to expand...
Click to collapse
nope it finished flashing, then rebooted and just at google screen when you first boot it up
---------- Post added at 12:31 PM ---------- Previous post was at 12:28 PM ----------
then i cheated and created a whole new zip and tried booting, i got to boot animation and thats where it stayed
ironfisted said:
nope it finished flashing, then rebooted and just at google screen when you first boot it up
---------- Post added at 12:31 PM ---------- Previous post was at 12:28 PM ----------
then i cheated and created a whole new zip and tried booting, i got to boot animation and thats where it stayed
Click to expand...
Click to collapse
FUUUUUU- I want to do a Hangouts Session with people to figure out a problem and make a custom rom for VZW GNex.
https://plus.google.com/113815011188600151667 There's my G+
Flashing Now
adam80460 said:
Flashing Now
Click to expand...
Click to collapse
Any issues, I'm having issues even trying to install my ROM :/ Can you sprinkle some of your developer magic?
Enter The Nexus said:
Any issues, I'm having issues even trying to install my ROM :/ Can you sprinkle some of your developer magic?
Click to expand...
Click to collapse
I actually haven't had a chance to install it yet unfortunately.. What issues were you having?
Sent from my SCH-I535
Says "installation aborted". I'm a noob at development, so I don't know what happened. I added all of >system from XenonHD to Stock 4.3 rom along with a few build.prop changes but it's still screwing me over.
Yeah I never file swapped before .. Not sure how to fix that..
Enter The Nexus said:
Says "installation aborted". I'm a noob at development, so I don't know what happened. I added all of >system from XenonHD to Stock 4.3 rom along with a few build.prop changes but it's still screwing me over.
Click to expand...
Click to collapse
What do you mean you added all of >system to stock 4.3? Everything in /system makes up a custom ROM. If you replaced/overwrote everything in the 4.3 /system with the /system in XenonHD, you would basically just have XenonHD and it would not be 4.3 (unless it was to begin with). Maybe post what your goal is and we can help you get there . It'll be hard if you're trying to do it without compiling from source. It's not as easy as copying apk's from one rom to another.
Related
I apologize for those that had wanted an evervolv rom ages ago and I didn't come through for ya. So here's a jellybean 4.2 rom. It's rough, but definitely something to work with. I'm gonna keep this post short. Read through it for links to releases, nightlies and source.
Right now the current source we are working on is Jellybean (Android 4.2.x).
For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
Current version: 3.2.0p1
Downloads:
Evervolv releases & nightlies
Below is the "Not working" or items that are buggy list. I'm going to keep it short and simple for the time being and let ya'all figure bugs out, and I will update this.
Items that need attention: (Not working or buggy)
*** Resetting this for v3.2 ***
Wifi
Click to expand...
Click to collapse
Here's a couple links to keep in mind:
My twitter: @preludedrew
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(The website has not been updated since our gingerbread builds... I know I know.)
IRC: #evervolv
Click to expand...
Click to collapse
[GPL Compliance]
Kernel Source: https://github.com/Evervolv/android_kernel_htc_msm7x30
Click to expand...
Click to collapse
Screenshots?
Sent from my Incredible 2
Wow will definitely try this. Is wifi really the only thing not working?
sent from vivow using XDAP
phillibl said:
Wow will definitely try this. Is wifi really the only thing not working?
sent from vivow using XDAP
Click to expand...
Click to collapse
No, that's just what is confirmed by me. The device I use to test these builds out is not activated, so data/cell could not work for all I know. This is the first release build I've done for this device, and will need input as to what to fix with Jellybean 4.2.
I appreciate any new development, but unfortunately no wifi is a deal breaker. I'll keep my eyes on it for the next version. Thanks for the development.
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
gtdtm said:
I appreciate any new development, but unfortunately no wifi is a deal breaker. I'll keep my eyes on it for the next version. Thanks for the development.
Click to expand...
Click to collapse
What the heck, I'll give it a try in the morning. What gapps are we supposed to use?
gtdtm said:
I appreciate any new development, but unfortunately no wifi is a deal breaker. I'll keep my eyes on it for the next version. Thanks for the development.
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
What the heck, I'll give it a try in the morning. What gapps are we supposed to use?
Click to expand...
Click to collapse
4.2 gapps lol
Downloading now. Will let you know in the am. Screenshots would be nice though.
Sent from my HTC Droid Incredible 2 using xda premium
Downloading now...
Sent from my Incredible 2 using xda app-developers app
1st attempt:
Downloaded rom.
Flashes the antivenom since I was coming from viper.
Flashed rom.
Flashed gapps.
Upon boot com.google.processes failed then setup wizard failed.
2nd attempt:
Flashes different gapps for jb.
Same issues as first attempt.
3rd attempt:
Wiped again.
Installed rom.
Did NOT flash gapps.
Rom booted fine.
No data or cellular connection.
Tried to insert APN for Verizon. While searching for apn phone went to sleep.
Could not unlock phone afterwards. Just a blank screen.
The rom did boot so that is a good start. Need to figure out why cellular service is not functioning and why the gapps are failing.
zax10 said:
1st attempt:
Downloaded rom.
Flashes the antivenom since I was coming from viper.
Flashed rom.
Flashed gapps.
Upon boot com.google.processes failed then setup wizard failed.
2nd attempt:
Flashes different gapps for jb.
Same issues as first attempt.
3rd attempt:
Wiped again.
Installed rom.
Did NOT flash gapps.
Rom booted fine.
No data or cellular connection.
Tried to insert APN for Verizon. While searching for apn phone went to sleep.
Could not unlock phone afterwards. Just a blank screen.
The rom did boot so that is a good start. Need to figure out why cellular service is not functioning and why the gapps are failing.
Click to expand...
Click to collapse
Same here..no signal bars..
Sent from my Incredible 2 using xda app-developers app
Awesome! Love your work on the original Incredible. Your more than welcome here.
Did anyone try flashing it with one of Aero's kernels?
gtdtm said:
Did anyone try flashing it with one of Aero's kernels?
Click to expand...
Click to collapse
Not I. If you try it and it works let us know.
Sent from my ADR6350 using xda premium
zax10 said:
Not I. If you try it and it works let us know.
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
Will do, if I can ever get the gapps to download over 3g.
Edit: Well, it didn't get past the splash screen with Aero's v15 kernel. I may tinker a bit more, but I need my phone to be a phone, so...
---------- Post added at 09:40 AM ---------- Previous post was at 08:52 AM ----------
Okay, after using the kernel failed I tried a normal flash. I was able to boot it and run through setup with gapps installed. I didn't have wifi or verizon data, so it couldn't log me in, so I skipped all that. It seems to run nicely, but there is no built in camera app. If it had data I would have tried a 3rd party. There is a "nightly" released already today, so I wonder if it has any improvements or if the dev is going to have to work on some device specific fixes for the carrier first. I'm definitely willing to keep trying, but I'd like to hear from the dev as to when we might see the data/phone stuff working.
Thanks for bringing it this far.
gtdtm said:
Will do, if I can ever get the gapps to download over 3g.
Edit: Well, it didn't get past the splash screen with Aero's v15 kernel. I may tinker a bit more, but I need my phone to be a phone, so...
---------- Post added at 09:40 AM ---------- Previous post was at 08:52 AM ----------
Okay, after using the kernel failed I tried a normal flash. I was able to boot it and run through setup with gapps installed. I didn't have wifi or verizon data, so it couldn't log me in, so I skipped all that. It seems to run nicely, but there is no built in camera app. If it had data I would have tried a 3rd party. There is a "nightly" released already today, so I wonder if it has any improvements or if the dev is going to have to work on some device specific fixes for the carrier first. I'm definitely willing to keep trying, but I'd like to hear from the dev as to when we might see the data/phone stuff working.
Thanks for bringing it this far.
Click to expand...
Click to collapse
The ROM looked really nice while I was able to run it. Also to the OP.
On the lock screen the clock is sized wrong. The bottom of the numbers are cut off.
Sent from my ADR6350 using xda premium
Excited to see some new development for our phones. I believe this is the first Android 4.2 rom for our phone
Sent from my Incredible 2 using xda app-developers app
gtdtm said:
Did anyone try flashing it with one of Aero's kernels?
Click to expand...
Click to collapse
This won't work as 4.2 required a little updating of the kernel. For those interested, the source is linked in the op.
As for data, ill look into some fixes tonight.
Sent from my LG-LS970 using xda app-developers app
Okay,
It boots up fine
no wifi obviously
no data
usb storage didn't work for me
did get com.android error at first boot, but not again.
I'll post some screenshots once i restore back.
Screenshots for those...
Not sure if this will be any help, but here is a logcat
Quick and dirty until I get around to fixing this post
http://omnirom.org/why-omni/
Downloads
ROM (grab the latest 4.3.1 build): http://www.androidfilehost.com/?w=files&flid=9378
GApps: http://goo.im/gapps
Instructions: Flash rom, flash gapps, flash root (supersu) if you wish
Multi window is not perfect, but it works
Bugs? You tell me
4.4 Omnirom coming soon
Any bugs?
and Thanks!!!
Edit: First
Sounds cool!
Downloading Now!:good:
Thanks
Thanks, but aren't those 4.2.2 GApps?
otroguero said:
Thanks, but aren't those 4.2.2 GApps?
Click to expand...
Click to collapse
Ah yes, I'm making a 4.3 debloated pack right now
Sorry to you guys that already downloaded/flashed, but i just added the multiwindow enabled rom
@otroguero grab the 4.3 gapps from the new folder I linked
CNexus said:
@otroguero grab the 4.3 gapps from the new folder I linked
Click to expand...
Click to collapse
Thanks Appreciate you bringing Omni!
Awesome work. Any chance of a d2vzw build?
LLStarks said:
Awesome work. Any chance of a d2vzw build?
Click to expand...
Click to collapse
Someone else was already working on it (talked to him in irc)
Nice! Downloading now. Been waiting for this! Thanks!
do we need to flash our own supersu? tb says I don't have root and I cant find any settings un dev options or in the system to enable root, im assuming we must flash or download from playstore?
You need to flash it, I'll add that to the OP
Thanks, I flashed the multi window zip from AFH, the build name says homemade 11/07 so did I download an older build?
Sent from my SPH-L710 using Tapatalk
So anyone who has this flashed can you confirm LTE/3G mms etc like the core stuff working ok?
Sent from my SPH-L710 using XDA Premium 4 mobile app
das_webos_transformer said:
So anyone who has this flashed can you confirm LTE/3G mms etc like the core stuff working ok?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed the multiwindow (which I couldn't find) version and did not have mobile data. I went to the APN section of system settings and was surprised to see none listed, which explained no data connection. Also under About Phone, my PRL was listed as "1". In the hopes of all this being an error, I restarted the phone and was immediately greeted with a screen telling me to activate the device to be able to call or get data. And in all my crack flashing I've never experienced that, so I ended up reverting to my previous nandroid.
With that said it did feel very smooth and ran well. Wifi worked and I was able to install some apps, but again couldn't find the multiwindow options. The build number stated the name of the other zip in the dev downloads, so maybe there was some mixup? But I'm definitely looking forward to more Omni. I've been on CM for so long, it'll be refreshing to run something else.
Sent from my GT-P5110 using Tapatalk 4
same exerpience
Awesome, finally we have omnirom for d2 devices.. Please show some love for building Omnirom for d2att devices? You rock Cnexus, appreciate your efforts..
Sent from my SAMSUNG-SGH-I747 using Tapatalk
CNexus said:
You need to flash it, I'll add that to the OP
Click to expand...
Click to collapse
yes +1 :good:
Don't know if you guys know but they have a nightly for this device now check it out here is the link.. http://download.cyanogenmod.org/?type=nightly
Sent from my SGH-T999 using XDA Premium 4 mobile app
HolyGhostBoy1 said:
Don't know if you guys know but they have a nightly for this device now check it out here is the link.. http://download.cyanogenmod.org/?type=nightly
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Installed last night running really well so far. Android build number is 4.4.1, so looks like Cyanogen team has already incorporated Google's latest source.
looked good save for wifi
Mr. Struck said:
Installed last night running really well so far. Android build number is 4.4.1, so looks like Cyanogen team has already incorporated Google's latest source.
Click to expand...
Click to collapse
I noticed some comments on the download saying after installing they fell into a boot loop, but I didn't have any problems like that. Only two issues I saw was rom mgr was gone and wifi couldn't get past "...turning on" (even after a reboot).
I went ahead and went back to my backup and will give cm11 a try every day or so - the wifi thing I suspect will work itself out.
Flashing CM11.zip Problem
mine is having issues flashing the rom, anybody know i running TWRP recovery could be my issue? Thanks in advance
im flashing this since this morning i flashed the newest CM 10.2 nightly and it some how it broke all my gapps and could only fix it to where the phone worked except most Google apps, therefore i decided to do a full wipe and istall CM11 but it is not flashing
chombombo said:
mine is having issues flashing the rom, anybody know i running TWRP recovery could be my issue? Thanks in advance
im flashing this since this morning i flashed the newest CM 10.2 nightly and it some how it broke all my gapps and could only fix it to where the phone worked except most Google apps, therefore i decided to do a full wipe and istall CM11 but it is not flashing
Click to expand...
Click to collapse
Most likely yes, TWRP is the culprit. Try Philz Touch 6.0.0.8, it has been amazing for me. Make sure to do a complete wipe of system, Dalvik-cache, and cache, the option on Philz is called "complete wipe to install new ROM" and then make sure to flash 4.4 GApps as well.
Mr. Struck said:
Most likely yes, TWRP is the culprit. Try Philz Touch 6.0.0.8, it has been amazing for me. Make sure to do a complete wipe of system, Dalvik-cache, and cache, the option on Philz is called "complete wipe to install new ROM" and then make sure to flash 4.4 GApps as well.
Click to expand...
Click to collapse
Philz Touch worked perfectly. Thanks! now im running 4.4.1 and its running pretty smooth i must say. Two things i didnt not find was the capability to change the brightness with the notification bar and the option to remove the name of the apps on the home screen. If anybody finds a work around lemme know thanks in advance.
Cyanogenmod did a hell of a good job on this update!
chombombo said:
mine is having issues flashing the rom, anybody know i running TWRP recovery could be my issue? Thanks in advance
im flashing this since this morning i flashed the newest CM 10.2 nightly and it some how it broke all my gapps and could only fix it to where the phone worked except most Google apps, therefore i decided to do a full wipe and istall CM11 but it is not flashing
Click to expand...
Click to collapse
you want to make sure you are using twpr 2.6.3.1
http://techerrata.com/browse/twrp2/d2spr
flash it with mobile odin
---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
chombombo said:
Philz Touch worked perfectly. Thanks! now im running 4.4.1 and its running pretty smooth i must say. Two things i didnt not find was the capability to change the brightness with the notification bar and the option to remove the name of the apps on the home screen. If anybody finds a work around lemme know thanks in advance.
Cyanogenmod did a hell of a good job on this update!
Click to expand...
Click to collapse
A lot of CM features don't get ported between CM versions immediately
paychex said:
you want to make sure you are using twpr 2.6.3.1
http://techerrata.com/browse/twrp2/d2spr
flash it with mobile odin
---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
A lot of CM features don't get ported between CM versions immediately
Click to expand...
Click to collapse
Is it stable ROM or is it buggy.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Frostacious said:
Is it stable ROM or is it buggy.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Daily driver so far
Sent from my SM-T217S using Tapatalk 4
check the link everyday cause they update it everyday.
How's the camera? There were a lot of issues with the unofficial versions.
Sent from my SPH-L710 using Tapatalk
supasanch24 said:
How's the camera? There were a lot of issues with the unofficial versions.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
+1
HolyGhostBoy1 said:
Don't know if you guys know but they have a nightly for this device now check it out here is the link.. http://download.cyanogenmod.org/?type=nightly
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I update them as they come out with twrp script fix here: http://forum.xda-developers.com/showthread.php?t=2562623
Is MMS working for all you sprint users?
SPH-L710, CM 4.4, Kt747, OKJ.
Jonny Wad said:
Is MMS working for all you sprint users?
SPH-L710, CM 4.4, Kt747, OKJ.
Click to expand...
Click to collapse
Just sent one through Hangouts
Sent from my SM-T217S using Tapatalk 4
paychex said:
Just sent one through Hangouts
Sent from my SM-T217S using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the reply. How about through the messaging app?
SPH-L710, CM11, Kt747, OKJ.
supasanch24 said:
How's the camera? There were a lot of issues with the unofficial versions.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
the cameras fine. the original CM 11 had some bugs like the front facing camera freezing up a phone and causing a reboot but the newest updates based off Google's release of 4.4.1 which was to fix bugs with the camera on the Nexus 5 they have fixed all camera issues and it even takes photos/focuses faster than before.
anybody able to use ART runtime, mine just reboots but it doesn't change it. my nexus 7 with CM11 does run ART though, any luck?
everything seems to be working fine and super fast. calendar wasn't syncing but today's update thru the playstore fixed it for me. camera seems the same to me.
running 12-1013 nightlie.
Sent from my SPH-L710 using XDA Premium 4 mobile app
chombombo said:
anybody able to use ART runtime, mine just reboots but it doesn't change it. my nexus 7 with CM11 does run ART though, any luck?
everything seems to be working fine and super fast. calendar wasn't syncing but today's update thru the playstore fixed it for me. camera seems the same to me.
running 12-1013 nightlie.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have read that if you use GAPPS, you need to flash a special ART compatible version if you want to use the ART runtime.
rocket321 said:
I have read that if you use GAPPS, you need to flash a special ART compatible version if you want to use the ART runtime.
Click to expand...
Click to collapse
it was the same GAPPS i used on my Nexus 7 tho, ohh well, im gonna have to read up on it, i did try looking for info here at xda but couldnt find much, didnt have much much time to look though.
I just Installed the newest nightly and Xposed Installer+GravityBox(KK) to make up for the past CM features such as controlling the brightness witht the status bar and changing the launching application on the notification bar's Time & Date. One feature I am still missing is removing the names of the apps on the homescreen... If you like extra features and modifications to your guy's phone i highly recomment Xposed+Gravitybox. Here is the link for who ever is interested: http://forum.xda-developers.com/showthread.php?t=1574401
Im loving 4.4 even with a broken screen which i hoping to abandon soon, but it really feels like a new phone and new experience, i know there wasnt much change but still
After the announcement of Ubuntu dual boot I visit their page
https://wiki.ubuntu.com/Touch/DualBootInstallation
(Please visit the page read it carefully to understand what I am talking about)
But I couldn’t understand how to do it under windows, so I open the dualboot.sh and took the link for Ubuntu Installer flashable zip and flash it through recovery.
http://humpolec.ubuntu.com/UPDATE-UbuntuInstaller.zip
I have Maguro with CM 11 4.4.2 installed (although not official “the one from Playfulgod”), with latest CWM recovery, and latest SuperSU installed. And of course opened boot loader…
After installing Ubuntu installer zip and booting to android you will find Ubuntu Dual Boot application, open it and hit install and that’s it. The installation may take more than 10 minutes…
After installation is complete you will have an app in Ubuntu to boot to android, and in android you have the app to boot to Ubuntu, uninstall it, or delete Ubuntu user data…
the first thing i noticed is when i set the time to GMT +3 it is changed in the setting but the clock in the indicators not updated, and of course it has the same lag in the previous Ubuntu touch builds if you know what I am talking about ( if you previously installed and try it ) so don't expect miracles with these developers builds and especially with Maguro specs..
Thanks man I'm going to try it now
Sent from my Galaxy Nexus using xda app-developers app
Do you know what directories are added after installing this so you know what to delete if you don't want it on your phone anymore?
t1.8matt said:
Do you know what directories are added after installing this so you know what to delete if you don't want it on your phone anymore?
Click to expand...
Click to collapse
If you want to uninstall it, just open the app (in Android)and select uninstall Ubuntu and it will ask you if you want to keep the user data(that's the case if you want to update Ubuntu, because right now updates can not installed directly and you need uninstall it and then install the newer version with keeping the user data) or you can delete the user data and nothing should be left in your phone and the application also should restore your recovery (CWM, TWRP) as in the installation Ubuntu will use your recovery Partition.
Sent from my SM-N900 using Tapatalk
salahmed said:
If you want to uninstall it, just open the app (in Android)and select uninstall Ubuntu and it will ask you if you want to keep the user data(that's the case if you want to update Ubuntu, because right now updates can not installed directly and you need uninstall it and then install the newer version with keeping the user data) or you can delete the user data and nothing should be left in your phone and the application also should restore your recovery (CWM, TWRP) as in the installation Ubuntu will use your recovery Partition.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
OK, thanks. Just want to gather some info before I give it a try. In on toro so it'll be an experiment. Where did you find that zip? I looked through the Ubuntu site and didn't see where to download it for future updates.
t1.8matt said:
OK, thanks. Just want to gather some info before I give it a try. In on toro so it'll be an experiment. Where did you find that zip? I looked through the Ubuntu site and didn't see where to download it for future updates.
Click to expand...
Click to collapse
OK if you read the first post you will know. All the download links are in the dualboot.sh just open it as a text file.
Sent from my SM-N900 using Tapatalk
any way to get this working on toroplus? i remember there being a build of the dev preview, but nothing past that. I would really love to give this a shot on my device.
salahmed said:
OK if you read the first post you will know. All the download links are in the dualboot.sh just open it as a text file.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
Gotcha, thanks.
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
Hmm, I'm getting no available channels under install Ubuntu and it won't let me install. I dunno if being on CM11 is a must or not as I'm on Gummy ROM. Might have to switch it up to see if that works. Didn't see that being a requirement in the wiki page.
It is mentioned that stock, AOSP, or cm is supported.
Sent from my SM-N900 using Tapatalk
I know this won't be possible for awhile, but I wish this cmda and available for toroplus.
Sent from my Galaxy Nexus using xda app-developers app
I installed official CM11 with supersu, and I'm still getting no available channels. I'm going to try and change my build.prop from toro to maguro to see if it changes. Don't know what consequences will come from doing that but can't hurt anything to try.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
Yep, changing the build.prop worked. See what happens after install.
woow, pretty awesome, thx for the info.
t1.8matt said:
I installed official CM11 with supersu, and I'm still getting no available channels. I'm going to try and change my build.prop from toro to maguro to see if it changes. Don't know what consequences will come from doing that but can't hurt anything to try.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
Yep, changing the build.prop worked. See what happens after install.
Click to expand...
Click to collapse
So how it went...???
Sent from my Galaxy Nexus using Tapatalk
salahmed said:
So how it went...???
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Not good. Install froze, went to nandroid back to a different build, nandroids aren't showing up. It ended up putting 2 more 0 folders in my sdcard directory and moved a bunch of stuff. I had to spend 2 hours moving stuff back to their correct directories. Won't be trying that again.
Sorry to hear that. But don't be upset, Ubuntu touch still far from using as a daily driver. I don't know but may be with specs like Snapdragon 800 and Adreno 350 Ubuntu touch will be more buttery. So far GNex can't handle it well...
Sent from my Galaxy Nexus using Tapatalk
salahmed said:
Sorry to hear that. But don't be upset, Ubuntu touch still far from using as a daily driver. I don't know but may be with specs like Snapdragon 800 and Adreno 350 Ubuntu touch will be more buttery. So far GNex can't handle it well...
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I'm not worried, I've been thinking of locking and unlocking my boot loader and starting from scratch anyways. I just hope someone else with a toro or toroplus reads this before attempting and finding themselves in a similar situation.
I flashed it but no app is appearing in my android
Sent from my Galaxy Nexus using Tapatalk
fire_kid2003 said:
I flashed it but no app is appearing in my android
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Just for info for other users, can you provide more details about what ROM you are using and which channel you used???
Sent from my Galaxy Nexus using Tapatalk
sorry my bad
i am using rooted stock
hmm no idea about the channel thingie
Sent from my Galaxy Nexus using Tapatalk
fire_kid2003 said:
sorry my bad
i am using rooted stock
hmm no idea about the channel thingie
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Which version of stock. 4.x.x, 4.1.x, 4.2.x, 4.3
Sent from my SM-N900 using Tapatalk
About OmniROM
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Click to expand...
Click to collapse
Disclaimer
Standard disclaimer applies, your warranty is void, this may eat your dog or burn your house down, delete all your pictures, etc.
Instructions
0. You need a recovery that supports SELinux. I'm told that recent versions of CWM support it, but I haven't tried them myself. The best option is the official TWRP 2.7.0.0 release (other recoveries may not be compatible with OpenDelta updates for nightlies).
If you want to flash my recovery, download the recovery.img and flash it using ODIN or Mobile ODIN. You can also use Recovery Tools to flash it from your device
1. Flash the ROM.
2. Flash SuperSU if you want root (it's not yet included in the ROM). I have not tried any other Superuser apps but SuperSU is supposed to be incorporated into Omni eventually. Important: you may need to install a backup script using SuperSU to persist it across flashes - see the settings in SuperSU for that.
3. Flash Kitkat/4.4 compatible Gapps (PA has some that work with this ROM).
1-3 can be queued in TWRP.
4. If coming from a different ROM wipe data/factory reset, otherwise you probably won't boot
Downloads
TWRP 2.7.0.0 official builds are here.
TWRP 2.6.3.1 (unofficial version; the 4th digit is basically just for device specific changes). Use Flashify, Mobile Odin, or Recovery Tools to flash .img files.
twrp-2.6.3.1-n8000.img
twrp-2.6.3.1-n8013.img
ODIN flashable tars:
twrp-2.6.3.1-n8000.tar.md5
twrp-2.6.3.1-n8013.tar.md5
You must flash this (or other 4.4 compatible recovery) if you're on the official TWRP 2.6.3.0 or other outdated recoveries, if you get an error about set_metadata_recursive when flashing
N8000 Nightlies
N801x Nightlies
Changelog
N8000
N801x
Sources
Device trees:
android_device_samsung_n80xx-common
android_device_samsung_n8000
android_device_samsung_n801x
Thanks, and have a nice day!
XDA:DevDB Information
OmniROM, a ROM for the Samsung Galaxy Note 10.1
Contributors
iofthestorm, marco9333, TheMorpheus, humberos, Entropy512, espenfjo
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Beta
Created 2014-03-01
Last Updated 2014-04-05
FAQs
Where can I report bugs?
http://jira.omnirom.org/ - be sure to assign them to me, Ibrahim Awwal, if they're device specific.
Where is multiwindow?
Multiwindow is still a work in progress, if you want to try it out you'll have to use my unofficial builds from http://forum.xda-developers.com/showthread.php?t=2550308
I can't flash the ROM, I get an error about set_metadata_recursive
Make sure you are using an up-to-date recovery, see the OP for a link to my recovery builds.
Reserved
Hi,
Thanks again for the great ROM. I was wondering if maybe you can add a section here of flashable zips for some possible cherry picks like multi window. This way we can get night lies but also get the latest and greatest. TIA.
Sent from my GT-N8013 using Tapatalk
avruma said:
Hi,
Thanks again for the great ROM. I was wondering if maybe you can add a section here of flashable zips for some possible cherry picks like multi window. This way we can get night lies but also get the latest and greatest. TIA.
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
Hmm, it's not really possible to do that for frameworks changes like that. I think if there is an xposed module or something for Multiwindow then that may work but I don't know if such a thing exists or if it could actually be done (but that's more likely to work than a flashable zip).
avruma said:
Hi,
Thanks again for the great ROM. I was wondering if maybe you can add a section here of flashable zips for some possible cherry picks like multi window. This way we can get night lies but also get the latest and greatest. TIA.
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
iofthestorm said:
Hmm, it's not really possible to do that for frameworks changes like that. I think if there is an xposed module or something for Multiwindow then that may work but I don't know if such a thing exists or if it could actually be done (but that's more likely to work than a flashable zip).
Click to expand...
Click to collapse
XMultiWindow
JamMasterClay said:
XMultiWindow
Click to expand...
Click to collapse
Thanx I tried that a few days ago and it didn't play nice with omnirom and omniswitch
Sent from my GT-N8013 using Tapatalk
Please support N8000..:crying::crying:
dannyella said:
Please support N8000..:crying::crying:
Click to expand...
Click to collapse
They're working on it. Use the unofficial builds for now.
Just flashed the latest 8013 build and for some reason my bookmarks wont sync in browser or chrome. Hmmmm... Strange.
Sent from my GT-N8013 using Tapatalk
I noticed that sometimes the back arrow on the bottom bar sometimes goes dim. Does anyone know why it does that or how to make it stop? It's starting to mess with my OCD...
Sent from my GT-N8013 using Tapatalk
---------- Post added at 09:18 PM ---------- Previous post was at 09:13 PM ----------
I also wanted to suggest a temporary solution for MultiWindow on the nightlies. I have been using the latest XHaloFloatingWindow KitKat test build, and it works great once you get all the settings right. It's an Xposed mod, so you will have to have that installed and enabled for it to work. Check out the XDA page for that build
Sent from my GT-N8013 using Tapatalk
---------- Post added at 09:20 PM ---------- Previous post was at 09:18 PM ----------
http://forum.xda-developers.com/showthread.php?t=2419287
Sent from my GT-N8013 using Tapatalk
Huh, I've noticed that too, I just thought I was going crazy. Not sure why it happens but I feel like it started around the time navbar customization was added, so I should look near that time period. If you can get a screenshot and logcat when it happens could you post it on JIRA? That way we can try to figure out if it's a common bug (check whether it'd already been reported of course).
Sent from my GT-N8013 using Tapatalk
dannyella said:
Please support N8000..:crying::crying:
Click to expand...
Click to collapse
Official N8000 nightlies are now up!
iofthestorm said:
Official N8000 nightlies are now up!
Click to expand...
Click to collapse
Yay!!
iofthestorm said:
Official N8000 nightlies are now up!
Click to expand...
Click to collapse
Yes, and OpenDelta works great!!
Does anyone know if I can assign OpenDelta to flash a second or third .zip after updating? You know, for SU
Sent from my GT-N8013 using Tapatalk
electrikjesus said:
Does anyone know if I can assign OpenDelta to flash a second or third .zip after updating? You know, for SU
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
Yes, there is a folder under OpenDelta where you can put additional file!
Sent from my LG-D802
electrikjesus said:
Does anyone know if I can assign OpenDelta to flash a second or third .zip after updating? You know, for SU
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
yes you can... check out FlashAfterUpdate -> http://forum.xda-developers.com/showthread.php?t=2575966 ... i think thats what your looking for.
its a folder in /sdcard/OpenDelta/ and you can place zips there ... see link for templates.
but for supersu you just need to let it install backup-script from inside supersu...
edit: oops, late
TheMorpheus said:
Yes, and OpenDelta works great!!
Click to expand...
Click to collapse
lucky n8000 users ... since the n8000 went nightly the n801x somehow stopped...no nightlies yesterday and today. Might just be a coincidence, a few other devices also stopped on 7th...
edit2: nightlies up again for n801x
tabtxk said:
yes you can... check out FlashAfterUpdate -> http://forum.xda-developers.com/showthread.php?t=2575966 ... i think thats what your looking for.
its a folder in /sdcard/OpenDelta/ and you can place zips there ... see link for templates.
but for supersu you just need to let it install backup-script from inside supersu...
edit: oops, late
lucky n8000 users ... since the n8000 went nightly the n801x somehow stopped...no nightlies yesterday and today. Might just be a coincidence, a few other devices also stopped on 7th...
edit2: nightlies up again for n801x
Click to expand...
Click to collapse
I think there was an issue with the build server, but it was fixed.
Works great but I think I don't have root access (supersu is not able to install binary), any help?