Batometer sensor on LGOG E975 - LG Optimus G (International)

I just found out that Optimus G has barometer. It was good news to me. The strange thing was there is absolutely no information on the web aboout this sensor on the phone. At first I didn't know if it was true, but I tested it and it is working fine.

Yes Optimus G has barometer sensor.

zdzdz said:
I just found out that Optimus G has barometer. It was good news to me. The strange thing was there is absolutely no information on the web aboout this sensor on the phone. At first I didn't know if it was true, but I tested it and it is working fine.
Click to expand...
Click to collapse
I think most of recent phone have it.
Its used to speed-up cold start of gps

Use cpu-z. It shows the barometer and the hPa value
Sent from my LG-E975 using Tapatalk 4

Any REAL use for this sensor?

Marcb said:
Any REAL use for this sensor?
Click to expand...
Click to collapse
the barometer is intended for measuring the atmospheric pressure
and off course i think you can measure the height of a building with it... but that involves breaking the phone :laugh:
and .. for your answer .. no .. not really .. we have a lot of meteorologic sites .

skate4life said:
the barometer is intended for measuring the atmospheric pressure
and off course i think you can measure the height of a building with it... but that involves breaking the phone :laugh:
and .. for your answer .. no .. not really .. we have a lot of meteorologic sites .
Click to expand...
Click to collapse
1 extra mm = 12 meters, right?
So according to weather site, current AP is 1001mbars.
So it should show 1015mbars, but phone says its 991mbars

Hmm.. basicaly yes (after some google research , of course ) but i don't know why it shows 991, maybe is not that accurate...
Sent from my LG-E975 using Tapatalk 4

Related

Water Proof test Xperia Acro S

Hello xda,
me and my friend have did the Xperia Acro S under water to see how it holds.
It did a very good job the music keeps playing and the screen is working fine so try it out if you really want to try it!
Video: http://www.youtube.com/watch?v=Dsty2GrS1ZA&feature=plcp
Video 2:
http://www.youtube.com/watch?v=VSIx4v5y6Ak
Hope you liked it!
Greetings SK
safariking said:
Hello xda,
me and my friend have putted the Xperia Acro S under water to see how it holds.
It did a very good job the music keeps playing and the screen is working fine so try it out if you really want to try it!
Video: http://www.youtube.com/watch?v=Dsty2GrS1ZA&feature=plcp
Hope you liked it!
Greetings SK
Click to expand...
Click to collapse
putted is not a word. How does the phone perform? I am thinking of getting 1 or the ion or the htc one x
mikailmohammed said:
putted is not a word. How does the phone perform? I am thinking of getting 1 or the ion or the htc one x
Click to expand...
Click to collapse
This is a very good phone it holds very good you can even use it as a hammer!
mikailmohammed said:
putted is not a word.
Click to expand...
Click to collapse
Yes it is.
cracksquirrel said:
Yes it is.
Click to expand...
Click to collapse
Technically yes, but not in the context the op used it in.
Great...awesome
Sent from my Nexus 7 using xda app-developers app
Does the screen actually work while wet?? And how well??
zackspeed said:
Does the screen actually work while wet?? And how well??
Click to expand...
Click to collapse
Would be nice to see. Scuba phone
memphis77 said:
Would be nice to see. Scuba phone
Click to expand...
Click to collapse
Need to remember - Only 1 meter down deep :silly:
What do you guys think about the water resistance of this phone while earphones are plugged in?
I'm not sure if it would survive a run in the rain while listening to music. But that's one thing i would like to do and also one of the reasons i bought this phone.
Sent from my LT26w using xda app-developers app
it is water "resistance" so you will screw it if you put in on water when one of those ports covers are open or even not "properly closed"! but if you use a bluetooth headset you will be still fine cuz the cover is not open anymore! and under the water i just tried to unlock the screen but it didnt work "perfect"! the screen was still working but not perfect not as good as it works out of water but when the screen is wet out of water like when u just take the phone out of water it works good!
Brave man indeed lol XD
Afik it is only ip 56 or 57...
That is a looooong way from water proof...
So keep that in mind if you really want to test it...
And have a look at a ip list to see what ip56/57 really is about...
I would like to see a ip68 phone instead...
Sent from my LT26i using xda premium
^should be okay if the phone is not completely exposed. newer phone can be dunked in water briefly and still survive (iphone 4/ galaxy s3)

My defy is back! "Old is gold"

So long time ago my defy got bricked while flashing..cos defy sipped all the juice and it got empty while flashing. I gave it for service no one could repair it.
Now I got a defy where only mother board works for approximately 13$ . Changed the motherboard , buttons, display and the back half myself and revived my defy.
Now I'm back to play with my defy even though I have xperia z, I simply love my defy cos
"Phones are meant to be smaller"
I cant text comfortably with such a big screen in my xperia z.
Defy is a great device. I realize "old is gold"
Sent from my C6602 using Tapatalk 4
Btw I'm well versed with the defy hardware. Any hardware probs, you can contact me thru xda or email me at [email protected]
Sent from my C6602 using Tapatalk 4
When u changed yr motherboard, your imei got changed too?
popcorn1122 said:
When u changed yr motherboard, your imei got changed too?
Click to expand...
Click to collapse
Yes is changing too.
Sent from my MB526 using xda app-developers app
Then it is dangerous ... hope you understand that...
popcorn1122 said:
Then it is dangerous ... hope you understand that...
Click to expand...
Click to collapse
Why?
I've changed 4 mainboards by the service. Nothing dangerous happens.
Sent from my MB526 using xda app-developers app
popcorn1122 said:
When u changed yr motherboard, your imei got changed too?
Click to expand...
Click to collapse
Yes it changed.
Sent from my C6602 using Tapatalk 4
if some illegal thing was done on that handset motherboard , and then that imei u purchased, then u replace motherboard, you would be in the radar... that way i am saying it is risky
popcorn1122 said:
if some illegal thing was done on that handset motherboard , and then that imei u purchased, then u replace motherboard, you would be in the radar... that way i am saying it is risky
Click to expand...
Click to collapse
but that's like saying no one should ever buy or use secondhand goods since you don't know what the previous owners had used it for any illegal activities? for examples, the secondhand car you bought could have been used for robberies, weapons used for murders, etc?
Its a kind of risk... u can preserve the ebay purchase paper for safety thats the only way out...
Until the phone works I'm very happy guyzzzz..
Sent from my C6602 using Tapatalk 4
pjgowtham said:
So long time ago my defy got bricked while flashing..cos defy sipped all the juice and it got empty while flashing. I gave it for service no one could repair it.
Now I got a defy where only mother board works for approximately 13$ . Changed the motherboard , buttons, display and the back half myself and revived my defy.
Now I'm back to play with my defy even though I have xperia z, I simply love my defy cos
"Phones are meant to be smaller"
I cant text comfortably with such a big screen in my xperia z.
Defy is a great device. I realize "old is gold"
Sent from my C6602 using Tapatalk 4
Click to expand...
Click to collapse
so true buddy i am either in love with my defy it's simply the best.
leemii said:
so true buddy i am either in love with my defy it's simply the best.
Click to expand...
Click to collapse
+1. how many smartphones out there besides motorola have multi-colour LED letting you know, without turning on the screen, if you have missed calls or messages etc? none to my knowledge anyway
and on top of that, water resist, dust proof, scratch resistance guerilla glass screen, and just the right size for a phone.....love it......not changing it for a long time yet.......unless it dies
pjgowtham said:
So long time ago my defy got bricked while flashing..cos defy sipped all the juice and it got empty while flashing. I gave it for service no one could repair it.
Now I got a defy where only mother board works for approximately 13$ . Changed the motherboard , buttons, display and the back half myself and revived my defy.
Now I'm back to play with my defy even though I have xperia z, I simply love my defy cos
"Phones are meant to be smaller"
I cant text comfortably with such a big screen in my xperia z.
Defy is a great device. I realize "old is gold"
Sent from my C6602 using Tapatalk 4
Click to expand...
Click to collapse
You are absolutely right with old is gold.
I was searching for an alternative quit for some time but all other ip67 phones are either almost with the same cpu and mem or have a display like an half laptop....
And now with cm10.2 the defy rocks and is fast!

Barometer

Hello!
I'm a paragliding pilot and I use the smartphones with special apps that helps me to detect hot air masses and helps me navigate better when I'm flying. These applications require a barometer that is only available on a small number of smartphones and the Mix 2 is one of them.
I want to buy a Mix 2 in 1-2 days but I dont know anything about the barometer inside and how good/bad is it.
Can someone please install this app from playstore (Sensor Test by Andrey Efremov, it has a blue icon with a arrow) and post a screenshot from the barometer/info page?
I want to see what vendor (probably Bosch) and model is the barometer sensor so I can make some research about it.
Thanks in advance!
I can't post a pic for some reason, but yes, it's Bosch.
Can you please tell me the exact name of the sensor?
My old Nexus 5 is using a Bosch BMP280 sensor wich did a great job. I want see if the new Xiaomi phones have the same sensor or a newer model.
Thanks!
abax4401 said:
I can't post a pic for some reason, but yes, it's Bosch.
Click to expand...
Click to collapse
Smart thing to do... install something because someone tells you to do so...
That app is safe. I'm not a spammer, but that app is the only one I know that shows the barometer name.
Search my youtube channel (epuru) so you can see that I'm a paragliding pilot and the fast beep beep beep sound you hear in my flying videos is produced by the barometer.
My old Nexus 5 is still doing a great job, but I'm in love with the Mix 2, but if the barometer from the Mix 2 is not ok I will have to say pass.
epuru22 said:
That app is safe. I'm not a spammer, but that app is the only one I know that shows the barometer name.
Search my youtube channel (epuru) so you can see that I'm a paragliding pilot and the fast beep beep beep sound you hear in my flying videos is produced by the barometer.
Click to expand...
Click to collapse
I am not going to search anything from someone that is asking folks to install some app on their first post on their first day.
Excuse me, but it is a bit odd in these days.
I read this forum a lot, but only today I have registered. You are right to be suspicious, but I still need help. My time is a little limited for research because I want to catch the discounts from aliexpress on theri 11.11 discounts festival.
Install whatever apps (maybe aida64/cpu-z) you know that shows infos about the barometer and please tell me the complete name of the sensor so I can find a datasheet about it.
Thank you!
epuru22 said:
I read this forum a lot, but only today I have registered. You are right to be suspicious, but I still need help. My time is a little limited for research because I want to catch the discounts from aliexpress on theri 11.11 discounts festival.
Install whatever apps you know that shows infos about the barometer and please tell me the complete name of the sensor so I can find a datasheet about it.
Thank you!
Click to expand...
Click to collapse
You could have found it yourself: Bosch BMP285
How? I dont have the Mix 2 yet, that's why I asked here.
I hope it's better or at least as good compared to the BMP280 from my Nexus 5.
I will ask a friend with a Mi6 to see if it has the same sensor as the Mix 2 and if he can let me to see how accurate is.
Thank you!
epuru22 said:
How? I dont have the Mix 2 yet, that's why I asked here.
I hope it's better or at least as good compared to the BMP280 from my Nexus 5.
I will ask a friend with a Mi6 to see if it has the same sensor as the Mix 2 and if he can let me to see how accurate is.
Thank you!
Click to expand...
Click to collapse
Just stop asking people to install things, you are not the only one around that is a no know
Sensor on 6 is the same.
No hard feelings
No hard feelings, my friend!
If the Bosch BMP280 sensor from Nexus 5 was good I suppose the Bosch BMP285 from the Mix 2 is a newer, better and even more accurate sensor.
I have just ordered in advance 2 tempered glass screen protectors and a case from Aliexpress and I will wait two days for the "chinese black friday" to order the Mix 2. I hope I will not break it on a paragliding hard landing.
Thanks for everything.
Dust2Dust said:
Smart thing to do... install something because someone tells you to do so...
Click to expand...
Click to collapse
EAD
Made this screenshots while in airplane mode, then uninstalled the app. Should be safe enough.
Tell me of these are good enough for you.
Hello! Yes, the screenshots are good for me. Thank you!
I ordered the Mix 2 saturday and today it was shipped from China. I hope I will receive the order in max 1 week.
epuru22 said:
Hello! Yes, the screenshots are good for me. Thank you!
I ordered the Mix 2 saturday and today it was shipped from China. I hope I will receive the order in max 1 week.
Click to expand...
Click to collapse
For me they took 12 days to ship to Germany.
Hi epuru22!
How did Mi Mix 2 work on paragliding. As a beginner I'm curious to know, I have Mix 2 too
epuru22 said:
Hello!
I'm a paragliding pilot and I use the smartphones with special apps that helps me to detect hot air masses and helps me navigate better when I'm flying. These applications require a barometer that is only available on a small number of smartphones and the Mix 2 is one of them.
I want to buy a Mix 2 in 1-2 days but I dont know anything about the barometer inside and how good/bad is it.
Can someone please install this app from playstore (Sensor Test by Andrey Efremov, it has a blue icon with a arrow) and post a screenshot from the barometer/info page?
I want to see what vendor (probably Bosch) and model is the barometer sensor so I can make some research about it.
Thanks in advance!
Click to expand...
Click to collapse
This is the photo from my mi mix 2 phone.it is a bosch sensor
Ph0ca said:
Hi epuru22!
How did Mi Mix 2 work on paragliding. As a beginner I'm curious to know, I have Mix 2 too
Click to expand...
Click to collapse
Hello! I dont know yet because weather is bad in Romania and my last flight was 2 months ago.
I played in house a little bit with it and it seems to be accurate and works great. My old Nexus 5 (BMP280 barometer) did a great job with XC Track, and it seems that Mix 2 (BMP285 barometer) is even better.
I cant wait for a day with nice weather so I can test it in a real flight.
godosgr said:
This is the photo from my mi mix 2 phone.it is a bosch sensor
Click to expand...
Click to collapse
Thank you!

Irritating Sound from The Camera module

Can anyone confirm that whether u r facing this issue or not...?
When i knock the phone near the rear camera lens i heard some sort of sound like the lens were loosely fitted...Please confirm it to me once...Thanks
Yes it is there. I guess it is one of the sensors.
Sent from my SM-A505F using Tapatalk
Sukhi said:
Yes it is there. I guess it is one of the sensors.
Sent from my SM-A505F using Tapatalk
Click to expand...
Click to collapse
Cracking sound ryt...? Is it more or less..? Thank u
Achyuth Reddy said:
Cracking sound ryt...? Is it more or less..? Thank u
Click to expand...
Click to collapse
I can't describe the sound but its prominent. Something similar to rattling sound.
Sent from my SM-A505F using Tapatalk
Sukhi said:
I can't describe the sound but its prominent. Something similar to rattling sound.
Sent from my SM-A505F using Tapatalk
Click to expand...
Click to collapse
Sir,sorry for the noob qn again...is that really a problem or is completely normal..?
Achyuth Reddy said:
Sir,sorry for the noob qn again...is that really a problem or is completely normal..?
Click to expand...
Click to collapse
That's perfectly normal IMO. I have heard these similar sounds in Samsung flagships and other OEMs before at different places. Enjoy your device till the time it is under warranty and it doesn't has any adverse effect on the day to day device functionality.
Sent from my SM-A505F using Tapatalk
Wow i thought i am the only one. Yes it does make a rattling around .. even if i drop the phone on my bed from ≥15-20cm. And also if you tap on the area beside the camera lens, you get to hear a blank tapping sound. Is it so?
suvam69 said:
Wow i thought i am the only one. Yes it does make a rattling around .. even if i drop the phone on my bed from ≥15-20cm. And also if you tap on the area beside the camera lens, you get to hear a blank tapping sound. Is it so?
Click to expand...
Click to collapse
Correct !
Yep. It makes the sound...
Hey, not you not me but every A50 user is reporting this to samsung and it said that it just a sound from the lens which is used for autofocus. So nothing to worry about it ?
I am facing the same issue. Rattling sound when I tap the backside of the phone.
What can be done for this? It has increased from last week.

Note 10+ 3D Scanner

Yesterday I received my T-Mobile variant Note 10+ which I pre-ordered from Samsung website. The device is awesome, but one of the key features they showed at unpacked is not on the device. I have not been able to find the 3D scanner. Is it just me or this is an issue? Thank you.
babaroye said:
Yesterday I received my T-Mobile variant Note 10+ which I pre-ordered from Samsung website. The device is awesome, but one of the key features they showed at unpacked is not on the device. I have not been able to find the 3D scanner. Is it just me or this is an issue? Thank you.
Click to expand...
Click to collapse
From what I've heard they haven't released it yet. It's on apkmirror. Search for Samsung 3D Scanner. Then go into Bixby Vision within the Camera and click on Apps and it should show up in there after installing the apk.
tlbland0426 said:
From what I've heard they haven't released it yet. It's on apkmirror. Search for Samsung 3D Scanner. Then go into Bixby Vision within the Camera and click on Apps and it should show up in there after installing the apk.
Click to expand...
Click to collapse
Will give that a try, thank you.
Ha, just came by to post the same question. I was like where is this cool feature....
babaroye said:
Will give that a try, thank you.
Click to expand...
Click to collapse
I was able to install this on my S10 5G as it has a ToF sensor like the Note 10+. Here is an example of 3D scanning one of my kids toys: https://imgur.com/gallery/sQVixjf
tlbland0426 said:
I was able to install this on my S10 5G as it has a ToF sensor like the Note 10+. Here is an example of 3D scanning one of my kids toys: https://imgur.com/gallery/sQVixjf
Click to expand...
Click to collapse
Installed it and it's now available. Thank you again.
isnt working well on note 10 plus......
Yeah, it definitely needs work!
Reflective things don't scan well.
Sent from my SM-N960U using Tapatalk
Compusmurf said:
Reflective things don't scan well.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Yeah, that's what I heard over on Reddit. Didn't know that at the time. I've also tried scanning non reflective items and they still didn't turn out too well either.
Hopefully over time, the app will get some updates. New toy. New software. I have seen a few impressive videos of some captures that were really good. I have anywhere from 30 minutes to 6 hours before mine is in my hands to play with. That is one of the features I am dying to test.
Sent from my SM-N960U using Tapatalk
Hello. Need this to replace bellus3d . Could someone post a face scan with a smile as an obj or ply so that I can see if the poly count is good enough for dental?
Thank you so much
 @babaroye
Thank the info.
Downloaded and check it out. A small test scan shows ot might ne pretty good.
I have an einscan sp. Ill he doing a comparison between the two.
But the note 10 scanner is pretty fast snd shall come in handy.
What kinda file ext is it? I'm curious if I can use for my 3d printer
Shuthefrontdoor said:
What kinda file ext is it? I'm curious if I can use for my 3d printer
Click to expand...
Click to collapse
You can export as .obj
Shuthefrontdoor said:
What kinda file ext is it? I'm curious if I can use for my 3d printer
Click to expand...
Click to collapse
.obj with texture file.
Still doing some testing.
I believe models are a close scale. I just need a better scan area since you have to be able to walk around the whole item.
.obj works not sure about the texture file though
coolz_hari said:
3d scanner couldn't be found in camera app. In samsung members got the link to download 3d scanner. It tried using all means but it shows couldn't be done .
Anyone successfully got it worked ?
Click to expand...
Click to collapse
Make sure you use people for people and thing for everything else.
3D Scanner now available in the Galaxy Store. Seems to be a bit better.
It's not in the Galaxy Store for me. Sammobike had also posted it was available. But it isn't there.

Categories

Resources