I have a Virgin Mobile S3.
So far, I have successfully flashed PA 3.69 and Liquidsmooth 2.9 on it. All went well with initialization and setup. However, data did not at first seem to work.
When I changed the network mode to CDMA/EvDo, I was able to receive a 3G signal, but never was able to get 4G to work.
I flashed a modem I found on another forum and altered the apns-conf.xml in /system/etc, but that did not help. I also flashed both ROMs on top of base build MD7, if that helps anyone.
Would data feasibly work if I flashed on top of MD4, instead?
Simple fix - maybe....
Higgs_Boson said:
I have a Virgin Mobile S3.
So far, I have successfully flashed PA 3.69 and Liquidsmooth 2.9 on it. All went well with initialization and setup. However, data did not at first seem to work.
When I changed the network mode to CDMA/EvDo, I was able to receive a 3G signal, but never was able to get 4G to work.
I flashed a modem I found on another forum and altered the apns-conf.xml in /system/etc, but that did not help. I also flashed both ROMs on top of base build MD7, if that helps anyone.
Would data feasibly work if I flashed on top of MD4, instead?
Click to expand...
Click to collapse
I was having the same problem and decided to check the easiest thing first - the setting for Mobile Networks (Settings->Wireless and Network->More Settings) was set to Global for some reason. I went under Network Mode and selected LTE/CDMA and the phone automatically rebooted. As soon as it was back up, it was in 4G!:highfive:
Give it a shot and see if it works for you. Sometimes the silliest things are the ones we overlook!
Just re flash the radio if you want to get service again.
Sent from my SPH-L710 using xda app-developers app
Work in progress...
Nobody seems to be able to get this working. I have spent many hours searching fourms.
I am willing to build from source if deemed necessary
I installed the latest stable sprint CyanogenMod (10.1.3) on my Virgin Mobile Galaxy S3
I am able to get full 3G but no 4G. I have tired the sprint modem, and two virgin mobile modems including the latest version. The modem does not seem to make a difference. I have copied the apns-conf.xml file and that did nothing. I did reboot and change radio modes. I think there is some software on the Virgin Mobile rom that makes it work. I have seen a few programs that run at startup. Of interest are "itson" and "chameleon". I think these enable 4G? how could I transfer these programs to run on CyanogenMod?
I am able to access 4g at full speed with the same modem and apns on the stock rom. I have TWRP backups of both CyanogenMod and the latest Virgin Mobile stock rom. I can switch between them easily.
Maybe there is an easy fix, via the build.prop?
Here is the build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.L710VPAMG2
ro.build.version.incremental=L710VPAMG2
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 19 12:06:39 KST 2013
ro.build.date.utc=1374203199
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-73
ro.build.tags=release-keys
ro.product.model=SPH-L710
ro.product.brand=samsung
ro.product.name=d2vmu
ro.product.device=d2vmu
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2vmu
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2vmu-user 4.1.2 JZO54K L710VPAMG2 release-keys
ro.build.fingerprint=samsung/d2vmu/d2vmu:4.1.2/JZO54K/L710VPAMG2:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=L710VPAMG2
ro.build.hidden_ver=L710VPAMG2
ro.build.changelist=1293602
# end build properties
# 8960 RIL Basic
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Use CDMALTE Phone
telephony.lteOnCdmaDevice=1
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot Setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Control EONS (true = EONS enabled, false = EONS disabled)
persist.eons.enabled=false
# Data modules
ro.use_data_netmgrd=true
# Default ECCList (Except USCC)
ro.ril.ecclist=112,911,#911,*911
# Chameleon Default Operator (VMU with Chameloen)
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Samsung
# Do not show no sim notification
ro.config.donot_nosim=true
# ItsOn
ro.itson.path=/carrier/itson/resources/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=01_Over_the_horizon_Acoustic.ogg
ro.config.notification_sound=S_Whistle.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r5
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Here is my current build.prop on CyanogenMod
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39E
ro.build.display.id=cm_d2spr-userdebug 4.2.2 JDQ39E eng.jenkins.20130923.122419 test-keys
ro.build.version.incremental=eng.jenkins.20130923.122419
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Mon Sep 23 12:25:18 PDT 2013
ro.build.date.utc=1379964318
ro.build.type=userdebug
ro.build.user=jenkins
ro.build.host=cyanogenmod
ro.build.tags=test-keys
ro.product.model=SPH-L710
ro.product.brand=samsung
ro.product.name=d2spr
ro.product.device=d2spr
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2spr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2spr-user 4.1.2 JZO54K L710VPBMD4 release-keys
ro.build.fingerprint=samsung/d2spr/d2spr:4.1.2/JZO54K/L710VPBMD4:user/release-keys
ro.build.characteristics=default
ro.cm.device=d2spr
# end build properties
# system.prop for SPH-L710
#
# cannot take spaces
rild.libargs=-d /dev/smd0
ro.cdma.home.operator.numeric=310000
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=8
telephony.lteOnCdmaDevice=1
telephony.sms.pseudo_multipart=1
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
persist.eons.enabled=false
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.sf.lcd_density=320
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.ril.hsxpa=1
ro.ril.gprsclass=10
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
com.qc.hardware=true
persist.radio.apm_sim_not_pwdn=1
ro.ril.transmitpower=true
ro.opengles.version=131072
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.qc.sdk.audio.fluencetype=fluence
persist.timed.enable=true
ro.emmc.sdcard.partition=17
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
lpa.decode=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.config.svlte1x=true
ro.cdma.subscribe_on_ruim_ready=true
persist.radio.no_wait_for_card=0
media.aac_51_output_enabled=true
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
ro.telephony.ril_class=SamsungQualcommRIL
ro.telephony.call_ring.multiple=0
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=[LINK REMOVED DUE TO FORUM RULES]
ro.url.legal.android_privacy=[LINK REMOVED DUE TO FORUM RULES]
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1.3-d2spr
ro.modversion=10.1.3-d2spr
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Please help! Any advice is appreciated!
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
drsn0w said:
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
Click to expand...
Click to collapse
"Newer" S3, and I don't get any data connection at all, despite a good signal.
drsn0w said:
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
Click to expand...
Click to collapse
I'm also a Credo customer, and I've never gotten LTE service. For that matter, 3G service is spotty.
I am having the same problem on the Project x rom no 4g
Has anyone tried THIS 4g fix(second post)? I used this fix for my boost gs3, but it breaks MMS. Either 3g and MMS or 4g and no MMS with this fix.
Related
Hey does anyone have an edited build.prop file which will give full market access for the galaxy y or can someone please tell me what to change and what to change it to in the build.prop?
Step 1. Enter your query in the search bar.
Step 2. Look for it.
Step 3. If you're still struggling post back.
Read the rules
Sent from my GT-S5360 using XDA
rezler said:
Hey does anyone have an edited build.prop file which will give full market access for the galaxy y or can someone please tell me what to change and what to change it to in the build.prop?
Click to expand...
Click to collapse
Try this one....
Just copy paste...
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=ChobitsDigitalisV1.8
ro.build.version.incremental=DXKL3
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Wed Dec 21 17:44:20 KST 2011
ro.build.date.utc=1324457060
ro.build.type=user
ro.build.user=root
ro.build.host=DELL140
ro.build.tags=release-keys
ro.product.model=Nexus S
ro.product.brand=samsung
ro.product.name=Nexus S
ro.product.device= Nexus S
ro.product.board=totoro
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product= Nexus S
# Do not try to parse ro.build.description or .fingerprint
ro.build.description= Nexus S -user 2.3.6 GINGERBREAD DXKL3 release-keys
ro.build.fingerprint=samsung/ Nexus S / Nexus S :2.3.6/GINGERBREAD/DXKL3:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5360DXKL3
ro.build.hidden_ver=S5360DXKL3
ro.build.changelist=0000
ro.build.buildtag=
# end build properties
#
# system.prop for Nexus S
#
# SEC_USE_SIPC : if SEC_USE_SIPC is on, enable libsec-ril.so and block libbrcm_ril.so
#rild.libpath=/system/lib/libsec-ril.so
rild.libpath=/system/lib/libbrcm_ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapstartsize=1m
dalvic.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=96m
ro.sf.lcd_density=120
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
ro.telephony.call_ring.delay=0
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.sf.nobootanimation=0
debug.performance.tuning=1
video.accelerate.hw=1
persist.adb.notify=0
ro.min_pointer_dur=8
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.kernel.android.checkjni=0
ro.config.hwfeature_wakeupkey=0
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
persist.service.mount.playsnd=0
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.wmt.blcr.enable=0
ro.wifi.hotspotUI=1
ro.tether.denied=false
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
ro.media.enc.hprof.file.format=3gp
ro.media.enc.lprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.hprof.codec.aud=aac
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.hprof.vid.width=352
ro.media.enc.lprof.vid.width=176
ro.media.enc.hprof.vid.height=288
ro.media.enc.lprof.vid.height=144
ro.media.enc.hprof.vid.fps=30
ro.media.enc.lprof.vid.fps=30
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.lprof.vid.bps=192000
ro.media.enc.hprof.aud.bps=23450
ro.media.enc.lprof.aud.bps=23450
ro.media.enc.hprof.aud.ch=1
ro.media.enc.lprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.lprof.aud.hz=8000
ro.media.dec.jpeg.memcap=8000000
ro.media.cam.preview.fps=30
dalvik.vm.jniopts=warnonly
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/GT-S5360.xml
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.setupwizard.mode=OPTIONAL
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=1_Good_Morning.ogg
alsa.mixer.playback.master=Speaker
alsa.mixer.capture.master=Mic
alsa.mixer.playback.earpiece=Earpiece
alsa.mixer.capture.earpiece=Mic
alsa.mixer.playback.headset=Headset
alsa.mixer.capture.headset=Mic
alsa.mixer.playback.speaker=Speaker
alsa.mixer.capture.speaker=Mic
alsa.mixer.playback.bt.sco=BTHeadset
alsa.mixer.capture.bt.sco=BTHeadset
alsa.mixer.playback.bt.a2dp=BTHeadset
alsa.mixer.capture.bt.a2dp=BTHeadset
dev.sfbootcomplete=0
keyguard.no_require_sim=true
ro.config.ringtone=Over_the_horizon_Default_ringtone.ogg
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#BRAVIA.HACK
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# Xloud Engine
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
If you wanna download the apps not available in your country, please search there's a modded play store for that.
Sent from heaven!
use market unlocker app and set the carrier as T-Mobile us
Please as questions here. Thanks
-Techno
anasdcool71 said:
Try this one....
Just copy paste...
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=ChobitsDigitalisV1.8
ro.build.version.incremental=DXKL3
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Wed Dec 21 17:44:20 KST 2011
ro.build.date.utc=1324457060
ro.build.type=user
ro.build.user=root
ro.build.host=DELL140
ro.build.tags=release-keys
ro.product.model=Nexus S
ro.product.brand=samsung
ro.product.name=Nexus S
ro.product.device= Nexus S
ro.product.board=totoro
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product= Nexus S
# Do not try to parse ro.build.description or .fingerprint
ro.build.description= Nexus S -user 2.3.6 GINGERBREAD DXKL3 release-keys
ro.build.fingerprint=samsung/ Nexus S / Nexus S :2.3.6/GINGERBREAD/DXKL3:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5360DXKL3
ro.build.hidden_ver=S5360DXKL3
ro.build.changelist=0000
ro.build.buildtag=
# end build properties
#
# system.prop for Nexus S
#
# SEC_USE_SIPC : if SEC_USE_SIPC is on, enable libsec-ril.so and block libbrcm_ril.so
#rild.libpath=/system/lib/libsec-ril.so
rild.libpath=/system/lib/libbrcm_ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapstartsize=1m
dalvic.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=96m
ro.sf.lcd_density=120
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
ro.telephony.call_ring.delay=0
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.sf.nobootanimation=0
debug.performance.tuning=1
video.accelerate.hw=1
persist.adb.notify=0
ro.min_pointer_dur=8
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.kernel.android.checkjni=0
ro.config.hwfeature_wakeupkey=0
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
persist.service.mount.playsnd=0
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.wmt.blcr.enable=0
ro.wifi.hotspotUI=1
ro.tether.denied=false
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
ro.media.enc.hprof.file.format=3gp
ro.media.enc.lprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.hprof.codec.aud=aac
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.hprof.vid.width=352
ro.media.enc.lprof.vid.width=176
ro.media.enc.hprof.vid.height=288
ro.media.enc.lprof.vid.height=144
ro.media.enc.hprof.vid.fps=30
ro.media.enc.lprof.vid.fps=30
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.lprof.vid.bps=192000
ro.media.enc.hprof.aud.bps=23450
ro.media.enc.lprof.aud.bps=23450
ro.media.enc.hprof.aud.ch=1
ro.media.enc.lprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.lprof.aud.hz=8000
ro.media.dec.jpeg.memcap=8000000
ro.media.cam.preview.fps=30
dalvik.vm.jniopts=warnonly
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/GT-S5360.xml
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.setupwizard.mode=OPTIONAL
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=1_Good_Morning.ogg
alsa.mixer.playback.master=Speaker
alsa.mixer.capture.master=Mic
alsa.mixer.playback.earpiece=Earpiece
alsa.mixer.capture.earpiece=Mic
alsa.mixer.playback.headset=Headset
alsa.mixer.capture.headset=Mic
alsa.mixer.playback.speaker=Speaker
alsa.mixer.capture.speaker=Mic
alsa.mixer.playback.bt.sco=BTHeadset
alsa.mixer.capture.bt.sco=BTHeadset
alsa.mixer.playback.bt.a2dp=BTHeadset
alsa.mixer.capture.bt.a2dp=BTHeadset
dev.sfbootcomplete=0
keyguard.no_require_sim=true
ro.config.ringtone=Over_the_horizon_Default_ringtone.ogg
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#BRAVIA.HACK
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# Xloud Engine
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
If you wanna download the apps not available in your country, please search there's a modded play store for that.
Sent from heaven!
Click to expand...
Click to collapse
it didn't work...
I replaced my build.prop with this then force closed the google play market and cleared data then restarted my phone but it still didn't work. am i doing something wrong???
Astrul said:
Step 1. Enter your query in the search bar.
Step 2. Look for it.
Step 3. If you're still struggling post back.
Read the rules
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
I tried searching but i can't find one...
dhlalit11 said:
use market unlocker app and set the carrier as T-Mobile us
Click to expand...
Click to collapse
That app will only unlock apps that arnt available in my country but i live in the uk and most apps are available here. and the game that i've been trying to search for is definately available in the uk since a few of my friends also have the game.
rezler said:
That app will only unlock apps that arnt available in my country but i live in the uk and most apps are available here. and the game that i've been trying to search for is definately available in the uk since a few of my friends also have the game.
Click to expand...
Click to collapse
If you want to force a game on your Galaxy Y then download the APK's from the internet like I did most of the time it works (like with google goggles) etc...
GianniDPC said:
If you want to force a game on your Galaxy Y then download the APK's from the internet like I did most of the time it works (like with google goggles) etc...
Click to expand...
Click to collapse
Thats what i have done in the past but it's a pain when the app is updated since i have to search for the apk and download it. google market is alot more convenient...
Can someone please pull and post the build.prop?
soon
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.L900VPALJ1
ro.build.version.incremental=L900VPALJ1
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Wed Oct 3 16:04:44 KST 2012
ro.build.date.utc=1349247884
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-63
ro.build.tags=release-keys
ro.product.model=SPH-L900
ro.product.brand=samsung
ro.product.name=t0ltespr
ro.product.device=t0ltespr
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t0ltespr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0ltespr-user 4.1.1 JRO03C L900VPALJ1 release-keys
ro.build.fingerprint=samsung/t0ltespr/t0ltespr:4.1.1/JRO03C/L900VPALJ1:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=L900VPALJ1
ro.build.hidden_ver=L900VPALJ1
ro.build.changelist=265523
# end build properties
# 9x15 RIL Basic
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
ro.kernel.qemu=0
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property ril default operator
ro.cdma.default_numeric=310120
ro.cdma.default_alpha=Sprint
# Use CDMALTE Phone
telephony.lteOnCdmaDevice=1
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot Setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Control EONS (true = EONS enabled, false = EONS disabled)
persist.eons.enabled=false
# Data modules
ro.use_data_netmgrd=true
# Default ECCList (Except USCC)
ro.ril.ecclist=112,911,#911,*911
# Support Global Mode (Global Mode project)
ro.config.multimode_cdma=1
# Default Operator (SPR)
# ro.cdma.home.operator.numeric=310120
# ro.cdma.home.operator.alpha=Sprint
# Chameleon Default Operator (SPR with Chameleon)
ro.cdma.default_numeric=310120
ro.cdma.default_alpha=Sprint
# Camera sound play enforced for SPR
ro.camera.sound.forced=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
There you go
Sent from my SPH-L900 using Tapatalk 2
thanks, got what i needed
Thanks viper!
I have rooted now. but need to get the MSL code. has anyone gotten that yet. I have tried getMSL, and my msl apps from the market. .also installed terminal emulator with the getprop ril.MSL doesnt work..
Compudizzal said:
I have rooted now. but need to get the MSL code. has anyone gotten that yet. I have tried getMSL, and my msl apps from the market. .also installed terminal emulator with the getprop ril.MSL doesnt work..
Click to expand...
Click to collapse
Here you go
Hey guys
i have an unlocked rogers sgs3 on virgin right now
and im having issues with mobile TV, is it working for you guys at all? my keeps saying that its coming to my device soon
yes i have the plan for mobile TV
im using a sgs3 from rogers, unlocked using the latest paranoid android... anyone else having issues?
c_86 said:
Hey guys
i have an unlocked rogers sgs3 on virgin right now
and im having issues with mobile TV, is it working for you guys at all? my keeps saying that its coming to my device soon
yes i have the plan for mobile TV
im using a sgs3 from rogers, unlocked using the latest paranoid android... anyone else having issues?
Click to expand...
Click to collapse
I'm on virgin with tv and your on paranoid android and that's your whole problem you need to change these lines in build.prop:
ro.product.model=SGH-I747M
ro.build.PDA=I747MVLALH1
ro.build.product=d2can
Sent from my SGH-I747M using xda premium
i cant find the PDA part anywhere
there are places where is listed, do i make change all of them?
same with all areas that have d2att. do i change all of them to d2can?
You can change them all and don't worry about the PDA part. It should work. Make a backup in case you end up in bootloops.
Ya I did. Still nothing... care to share a build.prop?
Sent from my A510 using Tapatalk 2
i cant get this to work to save my live... i have change the build.prop so that everything had d2can etc etc nothing is working... ugh
Well try using a different rom then, bummer man!
Sent from my SGH-I747M using xda premium
I don't wanna! Lol I like my pa! That's the whole reason why I got the s3 cuz my nexus refused to run it smoothly lol
Stupid app. They should make it so it works on all devices and only checks phone numbers to see if your eligible to watch... something like the self serve apps.
Sent from my A510 using Tapatalk 2
I'll download the ROM after work and have a look. In the meantime what file explorer are you using for the build.prop edits?
Edit--> these are the four lines I edited to get it working on AOKP.
ro.product.name=d2v1
ro.product.device=d2can
ro.product.model=SGH-I747M
ro.build.product=d2can
jethro650 said:
I'll download the ROM after work and have a look. In the meantime what file explorer are you using for the build.prop edits?
Click to expand...
Click to collapse
Root explorer.
Sent from my Samsung Galaxy S3
Edited my last post....dang you quick lol
This is exactly what I have naw
begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=pa_d2can-userdebug 4.1.2 JZO54K eng.thebz1.20121120.195716 test-keys
ro.build.version.incremental=eng.thebz1.20121120.195716
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Tue Nov 20 19:58:32 EST 2012
ro.build.date.utc=1353459512
ro.build.type=userdebug
ro.build.user=thebz1
ro.build.host=Blakes-MacBookAir
ro.build.tags=test-keys
ro.product.model=SAMSUNG-SGH-I747M
ro.product.brand=samsung
ro.product.name=d2v1
ro.product.device=d2can
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2can
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=samsung/d2v1/d2can:4.0.4/IMM76D/I747MVLALH1:user/release-keys
ro.build.fingerprint=d2uc-user 4.0.4 IMM76D I747MVLALH1 release-keys
ro.build.characteristics=default
ro.cm.device=d2att
# end build properties
# system.prop for SGH-I747M
#
# cannot take spaces
rild.libargs=-d /dev/smd0
# Fields for custom RIL
# MAX PROP NAME is 31 chars --|
ro.telephony.ril_class=SamsungQualcommD2RIL
telephony.lteOnGsmDevice=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Themos.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.modversion=pa_d2att-2.54-11NOV2012-082042
ro.pa.family=pa_xhdpi
ro.pa.version=2.55
ro.goo.developerid=thebz1
ro.goo.rom=paranoidandroid
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.ril.hsxpa=1
ro.ril.gprsclass=10
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
com.qc.hardware=true
persist.radio.apm_sim_not_pwdn=1
persist.gps.qmienabled=true
ro.telephony.call_ring.multiple=0
ro.sf.lcd_density=320
ro.ril.transmitpower=true
ro.opengles.version=131072
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.qc.sdk.audio.fluencetype=fluence
persist.timed.enable=true
ro.emmc.sdcard.partition=17
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
lpa.decode=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.telephony.ril.v3=skipnullaid
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.mdpcomp.maxlayer=3
debug.mdpcomp.logs=0
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.0.0-Stable-d2att
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Sent from my Samsung Galaxy S3
c_86 said:
This is exactly what I have naw
begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=pa_d2can-userdebug 4.1.2 JZO54K eng.thebz1.20121120.195716 test-keys
ro.build.version.incremental=eng.thebz1.20121120.195716
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Tue Nov 20 19:58:32 EST 2012
ro.build.date.utc=1353459512
ro.build.type=userdebug
ro.build.user=thebz1
ro.build.host=Blakes-MacBookAir
ro.build.tags=test-keys
ro.product.model=SGH-I747M
ro.product.brand=samsung
ro.product.name=d2v1
ro.product.device=d2can
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2can
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=samsung/d2v1/d2can:4.0.4/IMM76D/I747MVLALH1:user/release-keys
ro.build.fingerprint=d2v1-user 4.0.4 IMM76D I747MVLALH1 release-keys
ro.build.characteristics=default
ro.cm.device=d2can
# end build properties
# system.prop for SGH-I747M
#
# cannot take spaces
rild.libargs=-d /dev/smd0
# Fields for custom RIL
# MAX PROP NAME is 31 chars --|
ro.telephony.ril_class=SamsungQualcommD2RIL
telephony.lteOnGsmDevice=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Themos.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.modversion=pa_d2att-2.54-11NOV2012-082042
ro.pa.family=pa_xhdpi
ro.pa.version=2.55
ro.goo.developerid=thebz1
ro.goo.rom=paranoidandroid
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.ril.hsxpa=1
ro.ril.gprsclass=10
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
com.qc.hardware=true
persist.radio.apm_sim_not_pwdn=1
persist.gps.qmienabled=true
ro.telephony.call_ring.multiple=0
ro.sf.lcd_density=320
ro.ril.transmitpower=true
ro.opengles.version=131072
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.qc.sdk.audio.fluencetype=fluence
persist.timed.enable=true
ro.emmc.sdcard.partition=17
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
lpa.decode=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.telephony.ril.v3=skipnullaid
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.mdpcomp.maxlayer=3
debug.mdpcomp.logs=0
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.0.0-Stable-d2can
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Sent from my Samsung Galaxy S3
Click to expand...
Click to collapse
I have made more edits in red. Try those. Remember have a backup or be prepared to reflash your ROM if it bootloops. Doing these edits everything has to be exactly right or it won't work.
Wooooo. Those edits worked!!!
Going to have to do those changes every time I do a ROM update but meh
Thank you!!!
Sent from my Samsung Galaxy S3
No problem. It was more than likely the product model. I took out the SAMSUNG and left it just SGH-I747M. But either way glad it's working for you.
I have yet to figure out how to add more carriers into my ROM so
That it is more user friendly, sadly everyone I have asked about
Adding in Multi-Carrier support hasn't replied.
Hope someone can enlighten me on the subject a little.
Cheers.
Adizzzle said:
I have yet to figure out how to add more carriers into my ROM so
That it is more user friendly, sadly everyone I have asked about
Adding in Multi-Carrier support hasn't replied.
Hope someone can enlighten me on the subject a little.
Cheers.
Click to expand...
Click to collapse
Something in a rom with an aroma installer or you just port them each and post them in the respective forums. Which are you trying to do ?
Sent from my SAMSUNG-SGH-I747 using xda premium
hednik said:
Something in a rom with an aroma installer or you just port them each and post them in the respective forums. Which are you trying to do ?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I just wanted to port in some more carriers so when it first boots
the ROM is more compatible with more then just Telus users.
I haven't ever used aroma and don't plan to if I can.
Adizzzle said:
I just wanted to port in some more carriers so when it first boots
the ROM is more compatible with more then just Telus users.
I haven't ever used aroma and don't plan to if I can.
Click to expand...
Click to collapse
With a Canadian ROM all the user needs to do is as their APN and change their build prop to reference their specific device. An easy way to do this would be to make a flashable zip with the apns.conf file and like the one from my ROM and then make a build prop for the at&t device or any other i747m device that the user can flash after installing the ROM.
apns-conf.xml - 198.08 KB
Sent from my SAMSUNG-SGH-I747 using xda premium
So basically I'd have to just create the flashable zip + updater-script, add in the apns-conf.XML file along with an at&t build.prop? Sorry to clarify, I'm just a little uncertain.
Adizzzle said:
So basically I'd have to just create the flashable zip + updater-script, add in the apns-conf.XML file along with an at&t build.prop? Sorry to clarify, I'm just a little uncertain.
Click to expand...
Click to collapse
Yep that's the really basic way and it works for at&t and Canadian ROMs so you don't have to upload a whole new ROM. You can get more in depth if you so desire but then you'd need to do it as a separate ROM
Sent from my SAMSUNG-SGH-I747 using xda premium
hednik said:
Yep that's the really basic way and it works for at&t and Canadian ROMs so you don't have to upload a whole new ROM. You can get more in depth if you so desire but then you'd need to do it as a separate ROM
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Well I guess I better start learning some more of that updater-script stuff then, thanks very much @hednik now back to the Comp I suppose.
Adizzzle said:
Well I guess I better start learning some more of that updater-script stuff then, thanks very much @hednik now back to the Comp I suppose.
Click to expand...
Click to collapse
If you can wait I can make one tomorrow for you. I'm not good at it either but I've got a blank one I use for a template
Sent from my SAMSUNG-SGH-I747 using xda premium
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Adizzzle said:
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Click to expand...
Click to collapse
Can you send me your build prop ? I don't want to download the whole rom just for that haha
---------- Post added at 07:52 AM ---------- Previous post was at 07:52 AM ----------
Adizzzle said:
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Click to expand...
Click to collapse
Can you send me your build prop ? I don't want to download the whole rom just for that haha. Just copy and paste is here and wrap code tags around it. Thanks !
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.I747MVLDMF1
ro.build.version.incremental=I747MVLDMF1
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Mon Jun 3 20:10:12 KST 2013
ro.build.date.utc=1370257812
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0709-09
ro.build.tags=release-keys
ro.product.model=SGH-I747M
ro.product.brand=samsung
ro.product.name=d2vl
ro.product.device=d2can
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2can
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2vl-user 4.1.2 JZO54K I747MVLDMF1 release-keys
ro.build.fingerprint=samsung/d2vl/d2can:4.1.2/JZO54K/I747MVLDMF1:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I747MVLDMF1
ro.build.hidden_ver=I747MVLDMF1
ro.build.changelist=1189444
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for HDMI/WFD
persist.sys.camera.connect=0
persist.sys.camera.transform=0
persist.sys.videomode=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=01_Over_the_horizon_Acoustic.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=4.1_r5
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Hello my watch has your code how is that?
My phone is rooted and I recently changed a few settings in build.prop so I could write with a pencil, not sure if it worked but when I went back to delete it when I thought it didn't work that is the line I copy pasted then in the process I deleted the last lines of Additional Build Props in mistake, I want to put them back but I don't know what they are please help thanks, this is what I have now: ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.2_r3
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Although
I just tested with a pencil and change in sensitivity works, but still the lines are missing and I am a bit worried, can anybody copy paste who has rooted Samsung Galaxy S4 Mini ?
Here you are:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.I9195XXUCNE6
ro.build.version.incremental=I9195XXUCNE6
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri May 23 19:49:46 KST 2014
ro.build.date.utc=1400842186
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD5815
ro.build.tags=release-keys
ro.product.model=GT-I9195
ro.product.brand=samsung
ro.product.name=serranoltexx
ro.product.device=serranolte
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=serranolte
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=serranoltexx-user 4.4.2 KOT49H I9195XXUCNE6 release-keys
ro.build.fingerprint=samsung/serranoltexx/serranolte:4.4.2/KOT49H/I9195XXUCNE6:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=I9195XXUCNE6
ro.build.hidden_ver=I9195XXUCNE6
ro.build.changelist=1646188
ro.product_ship=true
ro.chipname=MSM8930AB
persist.sys.storage_preload=1
ro.build.knox.container=
# end build properties
#
# from device/samsung/serranolte/system.prop
#
#
# system.prop for surf
#
ro.sf.lcd_density=240
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=0
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
audio.offload.disable=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=162
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#system prop for KDHA tuning
ro.config.dha_cached_max=8
ro.config.dha_empty_max=42
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=1m
dalvik.vm.heapmaxfree=4m
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.knox=true
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.error.receiver.default=com.samsung.receiver.error
ro.setupwizard.mode=OPTIONAL
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=4.4.2_r2
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.knox=v30
ro.config.tima=1
ro.config.timaversion=2.0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.gps.agps_provider=1
Sent from my black pearl using Tapatalk
Awesome
Thanks mate exactly what I needed.