[Q] How to boost headphone volume on european ROM - Huawei Ascend P6, Mate

Hello
the headphone sound is very low on european ROM BUT on B115 chinese edition it's very loud and far better.
Any one knows how to use chinese setting but on B111 rom please ?
thanks
david

My idea is to port the Sony walkman app but the question is how it is possible...
Sent from my HUAWEI P6-U06 using xda app-developers app

Will look today at sound files of the B115
Sent from my HUAWEI P6-U06 using xda app-developers app

http://forum.xda-developers.com/showthread.php?t=2417117

Tried a port from B115, unpack the zip in system folder (my phone softreboted after that, so better do a backup), and i think that sounds louder
DO IT AT YOUR OWN RISK

S34Qu4K3 said:
Tried a port from B115, unpack the zip in system folder (my phone softreboted after that, so better do a backup), and i think that sounds louder
DO IT AT YOUR OWN RISK
Click to expand...
Click to collapse
thanks a lot !!
For now I try the goila method and it works like a charm !!!
you are both great, guys !!
you made my day !

davidfrog said:
thanks a lot !!
For now I try the goila method and it works like a charm !!!
you are both great, guys !!
you made my day !
Click to expand...
Click to collapse
goila method disable all Dolby audio improvements

Is it much more louder or just slightly?
Sent from my HUAWEI P6-U06 using xda app-developers app

sisqoboy said:
Is it much more louder or just slightly?
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
maximum

Thx,
I have not rooted mine yet so I can't try it
But to be honest
I was really really disappointed when I played my song first on p6 after my sony arc s...
like a cheapest mp3 player...
Sent from my HUAWEI P6-U06 using xda app-developers app

It's really great
Envoyé depuis mon HUAWEI P6-U06 en utilisant Tapatalk 4

I tried to unzip the files in system folder, but when i did, it gets stuck at 43% unpacking and got a bootloop after that
Didn't know if I did anything wrong im new here...

joosjhh said:
I tried to unzip the files in system folder, but when i did, it gets stuck at 43% unpacking and got a bootloop after that
Didn't know if I did anything wrong im new here...
Click to expand...
Click to collapse
Bootloop or reboot?
If bootloop, sorry, but you need to reflash stock rom using the default recovery

S34Qu4K3 said:
Bootloop or reboot?
If bootloop, sorry, but you need to reflash stock rom using the default recovery
Click to expand...
Click to collapse
It was unpacking and at 43% it suddenly reboots. I waited 15 minutes but the startscreen didn't came up anymore. After that I did a reflash.

So, it's working well now?
Sent from my HUAWEI P6-U06 using xda app-developers app

S34Qu4K3 said:
So, it's working well now?
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Yup it's working

noob here
guys sorry but im nooby here but i really can use this
so if anybody can guide me step by step to get my huawie louder i will be very grateful

Hi!
I found this method in an another topic her on xda. What I did:
1. Rooted the phone: http://forum.xda-developers.com/showthread.php?t=2390491
Used method 1 from the topic above.
2. Downloaded root explorer (not necessary, you can do it with other file browsers as well, but I like this one)
3. Go to /cust/"YOURCARRIER"/prop/local.prop and edit the file. Look for the line "ro.config.hw.security_volume=11" and make it inactive by putting a # at the start of the sting.
For the noobs out there: My girlfriends phone bought from hungarian vodafone. So I went /cust/vodafone/prop/local.prop then looked for the line a modified like this #ro.config.hw.security_volume=11.
4. Rebooted then enjoyed th BJ from my GF

nemlehet said:
Hi!
I found this method in an another topic her on xda. What I did:
1. Rooted the phone: http://forum.xda-developers.com/showthread.php?t=2390491
Used method 1 from the topic above.
2. Downloaded root explorer (not necessary, you can do it with other file browsers as well, but I like this one)
3. Go to /cust/"YOURCARRIER"/prop/local.prop and edit the file. Look for the line "ro.config.hw.security_volume=11" and make it inactive by putting a # at the start of the sting.
For the noobs out there: My girlfriends phone bought from hungarian vodafone. So I went /cust/vodafone/prop/local.prop then looked for the line a modified like this #ro.config.hw.security_volume=11.
4. Rebooted then enjoyed th BJ from my GF
Click to expand...
Click to collapse
worked like a charm for me ! Thanks !

Thanks
nemlehet said:
Hi!
I found this method in an another topic her on xda. What I did:
1. Rooted the phone: http://forum.xda-developers.com/showthread.php?t=2390491
Used method 1 from the topic above.
2. Downloaded root explorer (not necessary, you can do it with other file browsers as well, but I like this one)
3. Go to /cust/"YOURCARRIER"/prop/local.prop and edit the file. Look for the line "ro.config.hw.security_volume=11" and make it inactive by putting a # at the start of the sting.
For the noobs out there: My girlfriends phone bought from hungarian vodafone. So I went /cust/vodafone/prop/local.prop then looked for the line a modified like this #ro.config.hw.security_volume=11.
4. Rebooted then enjoyed th BJ from my GF
Click to expand...
Click to collapse
Worked for me too. Now i can finally listen to my songs like a boss :victory:

Related

[DOWNLOAD]Nexus Prime-Bootlogo Animation for Galaxy S2

Hi guys
Just found this and thought i share with you guys..Its the boot animation from the new Nexus Prime phone...I already installed it on my phone and its looking gorgeous i have to say..Anyway i thought i share it with you guys and here is the link were to download it from.
http://www.multiupload.com/OCLC5JL5O3
All you got to do is download it and flash through CWM and reboot your phone. I tested it on my first and it works like a charm..Very beautiful..
Enjoy
Make sure also to wipe dalvik cache just incase it dont work first time and then flash again.. thanks
http://www.youtube.com/watch?v=hRuQfN6e3MM
Link above is what it looks like so you can preview before you flash it..
Credit to Android Police for finding this beaty
It already comes installed with CM7.1..Thanks to Saar17 for pointing it out.
To revert back to old boring bootlogo here is how to do it thanks to Theory for pointing it out.
You can revert to stock animation by deleting bootanimation.zip in root/data/local directory. To do that you need to get rootexplorer to do it...
Original bootanimation you can find it here.(thanks to Indie from OmegaRom)
http://www.filesonic.com/file/2342311574
Guys i have not tried to revert back to original as i like this one to much...If you want to revert to the one you currently using do the easy way by just backing up your rom and once your rebooted flash the nexus one...if you dont like the nexus one then just restore from your backed up rom...I would not advice doing it from rootexplorer if you dont know what your doing with it...
Thanks again and hope you enjoy this..
PS if you are using the new siyah kernel 2.0 i would recommend not to flash this bootlogo as the kernel does not support this.(thanks to 2bullish for letting me know)
Damn i opened this in the wrong thread..Sorry mods should of been in Themes and Apps..If someone can move it there much would be much appreciated..Sorry again
Id like feedback from people to know what they think and firstly if its working on your phone...cheers and hope you enjoy..
Apologies for posting this thread in the wrong section i thought i was doing in themes and apps sorry again
It works.
Sent from my GT-I9100 using Tapatalk
sileshn said:
It works.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks friend for sharing it with me...what you think of it
Weird, it installs fine yet my boot animation remains unchanged.
Sent from my GT-I9100 using xda premium
ChongoDroid said:
Weird, it installs fine yet my boot animation remains unchanged.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
wipe dalvik....i just downloaded it to my phone then went into cwm and pressed flash update looked for the file and zip and then clockwork worked its magic....now a friend of mine said it wasnt working first time so he did wipe dalvik flashed it and then it worked...do the same and see
looks superb !!!!!!!! checking it out right now !!! thanks a ton for sharing.
Update :
it works !!!!! i loved it !!!
Regards,
Karan.
Works and looks nice. Thanks
Works niiice btw anyone got the dre beats boot logo? It was here somewhere lol :-/.
Sent from my GT-I9100 using xda premium
looks cool man,i am going to flash it on my gs2
Love it.. Thanks for the bootanimation.. But 1st try flashing using CWM did not work.. Need to wipe dalvik cache 1st then its working... Very nice indeed...
Sent from my GT-I9100 using Tapatalk
androidkid311 said:
Works niiice btw anyone got the dre beats boot logo? It was here somewhere lol :-/.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Apps & Themes forum from memory.
Was using it for a bit, but removed the HTC part so it only showed the Beats intro...animation ended up being too short, and went to a blackscreen for a few sec once 'beats' finished lol
is the framerate the same as in the youtube vid? hope it's faster :/
fyre31 said:
is the framerate the same as in the youtube vid? hope it's faster :/
Click to expand...
Click to collapse
Hiya mate its tad slower but the colours are more amazing than in the video.
Thanks to everyone for your comments. just wanted to share it woth you guys cause i know you guys are like me and waiting for a leaked version of ICS like crazy so if we get a tiny glimpse of it so why not
Didn't work on MIUI, anyone have a mtz file to use it?
Sent from my GT-I9100
NXUS said:
Didn't work on MIUI, anyone have a mtz file to use it?
Sent from my GT-I9100
Click to expand...
Click to collapse
Whats a mtz file buddy? Sorry so far its just a zip to flash through cwm.. didnt knew if it would work on yours. let me know what kinda file would make it compatible and i will to try and convert it and put a new link up for you guys
Thx for this perfect bootanimation!
Thx man, this bootanimation worked like a charm on VR3.0!
I love the Prime already before it release
patpeewee said:
Thx man, this bootanimation worked like a charm on VR3.0!
I love the Prime already before it release
Click to expand...
Click to collapse
thanks mate glad you enjoyed it.

[APP] DSP Manager for GS3

DSP Manager is the sound processing app from the Cyanogen Mod Team(thanks).You can customize the equalizer manually or select from a bunch of preset options.
Requirements :
Rooted GS3
Custom recovery
Installation :
Enter recovery
Make a backup just in case
Install zip from sd card
Choose zip from sd card
Select DSPManager.... Zip
Reboot
Enjoy!!
If it worked for you please report back!
Download
DSP-Manager-v2.0.zip - 345.45 KB
apascual89 said:
DSP Manager.
Attached you will find the apk in a zip file that will install as a system app. I used this on the One X, can't remember who created it, sorry. Tried it on the GS3 and it's seems to be working perfectly.
Remember that I grabbed this from the One X threads, so don't freak out when the install proccess says something about One X
Enjoy!!
Click to expand...
Click to collapse
how do u install it on s3? do u have a guide?
Thank you in advance!
seems 2be a cwm-flash, try out
Need root for this ? any conflicts with poweramp ?
thanks
no
doki81 said:
how do u install it on s3? do u have a guide?
Thank you in advance!
Click to expand...
Click to collapse
If just updated with steps and requirements.
chriskinetic said:
Need root for this ? any conflicts with poweramp ?
thanks
Click to expand...
Click to collapse
Yes you need to be rooted and have a custom recovery installed like CWM.
Shouldn't interfere with poweramp
Have you tested it?????
I had tried it once (not this buy my own port) and it didn't work
EDIT : OK tested it... And it works!!!!!!
Thanks for the share
123shree said:
Have you tested it?????
I had tried it once (not this buy my own port) and it didn't work
Click to expand...
Click to collapse
I'm using it right now streaming over bluetooth. Remember to enable it in Sound/ Music Effects
apascual89 said:
I'm using it right now streaming over bluetooth. Remember to enable it in Sound/ Music Effects
Click to expand...
Click to collapse
Didn't find the need to... Just flashed it and it worked perfectly after the reboot.
hey guys iam verry happy with this DSP.Its the best DSP plugin what ever i used in my whole smartphone world and i am started by win mobile ^^
The sound is verry verry fantastic !Deep and smouth bass booster.Its so good when you listening old Alben without good dynamik, like a-ha or depeche mode.
The Treble was absolut clear an no aggressiv.
But for all power amp useres, make shure that you dont have "direct control" activate.so the DSP doesnt work !You can find it in settings-audio engine-advanced tweaks.
thanks and good night ;-)
Is it working for you guys?
190 downloads and not many replies, Has it worked for you guys?
I looking for a ver running on t989?
Anyone could share?
Sent from my SGH-T989 using XDA
It worked perfectly. Thanks a lot! :-D
Den store har talat.
Dont work for me, Wanam odex LF2 rom
Sent from my GT-I9300 using XDA
I changed the binary script so it says For Samsung Galaxy S3 instead of the HTC one X crap, for those that care
before i install it . how do you remove it if you choose to ?
dazzzdelux said:
before i install it . how do you remove it if you choose to ?
Click to expand...
Click to collapse
You can delete it from system /app using root explorer or a root level file browser
apascual89 said:
You can delete it from system /app using root explorer or a root level file browser
Click to expand...
Click to collapse
ok , thanks
I'm on Omega 5 and it doesn't have any impact on the sound coming from my bluetooth speaker.

[UPDATED][Share][Tweaks] PIMP MY ROM (Try V.2.1 out!)

Original thread, link: http://forum.xda-developers.com/showthread.php?t=1908269
Basically this tweak will modify "Init.d", "Build.prop" and add some features.
I've been using it for a day now without noticing any difference (not that I expected to be super noticeable), but I'd like to know if you guys notice any performance boost.
Lets share and compare!
edit: it should work now, but if your installer takes a second to finish, read this: http://forum.xda-developers.com/showpost.php?p=32865023&postcount=20
This video will show you how it works:
U tried?
Sent from my GT-S5830 using xda premium
kvrjsoni said:
U tried?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
uhh.... people should start reading the first post. Especially when there is not a lot of information.
quoting myself: "I've been using it for a day now"
Downloading,asking my self why so heavy 100.1 MB ,will report results later.... !
Tested it on a fresh install of cm 10,and its not working,the setup goes through all the steps .but when its on the final step I press next and it says "installed " in a blink, like if it does nothing .and I'm afraid that it does nothing,I even tried to create a log by checking the option in the setup,but it does nothing.
diegonnc said:
Tested it on a fresh install of cm 10,and its not working,the setup goes through all the steps .but when its on the final step I press next and it says "installed " in a blink, like if it does nothing .and I'm afraid that it does nothing,I even tried to create a log by checking the option in the setup,but it does nothing.
Click to expand...
Click to collapse
Same :3
Sent from my iPhone
@QNBT
Which rom are you using?, and are you sure its working?
It seems like goo.im hates me....I can't download from there
Sent from Ursa's claws.
diegonnc said:
@QNBT
Which rom are you using?, and are you sure its working?
Click to expand...
Click to collapse
edit: additional lines in "Init.d" and "Build.prop" are added, just check yours to confirm.
Using MIUIXXX, selected AOSP Gingerbread when installing this. I installed this on the Nexus 7 as well and the installation (after picking all the items) took about 15secs on that one, but on my SGA it took 1second instead, so I'm not 100% sure it's working. The difference between the options that I used on the Nexus 7 was that I also installed 6-7 themes (which might explain the longer wait). Still, it does makes sense that the installation would take really fast since basically the only thing that was added/changed in my SGA was plain text.
I posted it here so maybe some of you could confirm that it does improve our phone.
QNBT said:
edit: additional lines in "Init.d" and "Build.prop" are added, just check yours to confirm.
Using MIUIXXX, selected AOSP Gingerbread when installing this. I installed this on the Nexus 7 as well and the installation (after picking all the items) took about 15secs on that one, but on my SGA it took 1second instead, so I'm not 100% sure it's working. The difference between the options that I used on the Nexus 7 was that I also installed 6-7 themes (which might explain the longer wait). Still, it does makes sense that the installation would take really fast since basically the only thing that was added/changed in my SGA was plain text.
I posted it here so maybe some of you could confirm that it does improve our phone.
Click to expand...
Click to collapse
Its not working then, beacuse i checked every single option, including themes and some file explorers, ah and the walkman music player. And it does nothing, i mean there is not a single app installed after running the setup.Maybe its not compatible ?
diegonnc said:
Its not working then, beacuse i checked every single option, including themes and some file explorers, ah and the walkman music player. And it does nothing, i mean there is not a single app installed after running the setup.Maybe its not compatible ?
Click to expand...
Click to collapse
I didn't install any apps/themes but as i said, my init.d and build prop was changed, so the installation worked but i don't know if any effects are taken.
Sent from my Nexus 7 using xda app-developers app
In post #6 you can read many of the apps in this tweak won't work on gingerbread..so we could download light version?! Which is about 30mb!!
Inviato dal mio GT-S5830 con Tapatalk 2
Toni5830 said:
In post #6 you can read many of the apps in this tweak won't work on gingerbread..so we could download light version?! Which is about 30mb!!
Inviato dal mio GT-S5830 con Tapatalk 2
Click to expand...
Click to collapse
Hm,,, so most of the features on the full package one is for ics/jb, Gonna try to light version tonight.
Tried this from original thread didn't work
Sent from my GT-S5830 using xda premium
Hey, guys! Tried V.2 for MDPI, I flashed it choosing stock gingerbread (instead of AOSP) and
I instantly felt a faster overall performance! I'd like someone else to test it out to confirm that this isnt a placebo effect xD
And also, it took like a sec to install this time as well but as I said, it seem to work!
note: I skipped the multitasking step since I had no idea which one suited me.
Make a backup before flashing
edit: for instant, try opening titanium backup (which usually takes awhile)
QNBT said:
Hey, guys! Tried V.2 for MDPI, I flashed it choosing stock gingerbread (instead of AOSP) and
I instantly felt a faster overall performance! I'd like someone else to test it out to confirm that this isnt a placebo effect xD
And also, it took like a sec to install this time as well but as I said, it seem to work!
note: I skipped the multitasking step since I had no idea which one suited me.
Make a backup before flashing
edit: for instant, try opening titanium backup (which usually takes awhile)
Click to expand...
Click to collapse
Light or full version?? Maybe i'll try it today..
Inviato dal mio GT-S5830 con Tapatalk 2
Toni5830 said:
Light or full version?? Maybe i'll try it today..
Inviato dal mio GT-S5830 con Tapatalk 2
Click to expand...
Click to collapse
I tried the normal one(~70mb), couldnt find the light version lol.
Sent from my Nexus 7 using xda app-developers app
It works on JB???cm10 or AOKP ???
Sent from my iPad JB using Tapatalk HD
matt96g said:
It works on JB???cm10 or AOKP ???
Sent from my iPad JB using Tapatalk HD
Click to expand...
Click to collapse
It's mostly optimized for ICS/JB so yes, it works.
Swap files!
HEy. IF you were to go see the original PMR thread, you would see that in order for it to work on some devices, you have to switch binary-update-installer from the ROM you have (the roms' .zip file) to the PMR zip file.
Just follow my guide:
Open the zip of the rom you are running (the .zip file that you flash in recovery)
Inside this zip, navigate to : META-INF/com/google/android
Extract the file called "update-binary" and rename it to "update-binary-installer"
Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.4.1-Universal.zip)
Inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
Now copy the "update-binary-installer" file you extracted from your rom to Pimp My Rom's zip (still in META-INF/com/google/android)
Close the zip and flash it, the installation process should now work normally so you can Pimp your Rom !
this goes to everyone who experience a problem when pressing INSTALL and it finishes in a second, without any logs showing.
Have a nice day, press THANK YOU if it worked

Huawei p6 third party rec

This rec is released from China, I am a Chinese person reprinted here
Original link: //bbs.anzhi.com/thread-8174135-1-1.html
You can be translated into English!
PS: You can create third-party ROM. Example CM10
My English is not very good, probably means this!
REC Accessories:View attachment mgyun.apk
hauntek said:
This rec is released from China, I am a Chinese person reprinted here
Original link: //bbs.anzhi.com/thread-8174135-1-1.html
You can be translated into English!
PS: You can create third-party ROM. Example CM10
My English is not very good, probably means this!
REC Accessories:View attachment 2202116
Click to expand...
Click to collapse
Web page not available apparently
JackHanAnLG said:
Web page not available apparently
Click to expand...
Click to collapse
Yup webpage unavailable, downloaded the apk and installed. Probably going to need to decompile apk and translate since I've not idea what the given options represent.
hauntek said:
This rec is released from China, I am a Chinese person reprinted here
Original link: //bbs.anzhi.com/thread-8174135-1-1.html
You can be translated into English!
PS: You can create third-party ROM. Example CM10
My English is not very good, probably means this!
REC Accessories:View attachment 2202116
Click to expand...
Click to collapse
.BBS.anzhi forum is out since two months..i don't know why..
Sent from my HUAWEI U9508 using xda app-developers app
Tried this, selected first option which i assume initates the scripts located within apk assets, this copies the recovery binary to /system/xbin/, also an updated
resources folder for CWM and lastly it copies install-recovery.sh to /system/etc/.
After this it appears to run said scripts.
The second option attempts to reboot the device into recovery however phone was unable to boot at all in the process.
Couldn't get it to power on at all. Fortunately holding Power, Volume + & Volume - saved my bs in this case, nearly had a heart attack otherwise. I had my /sdcard/dload/UPDATE.APP still so all recovered... And so did the phone.
I think that'# for T-06 phones (chinese phones), i didn't tried it cause of this
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
I think that'# for T-06 phones (chinese phones), i didn't tried it cause of this
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Funny enough this is actually zhenaguo's untranslated recovery...
erbode said:
.BBS.anzhi forum is out since two months..i don't know why..
Sent from my HUAWEI U9508 using xda app-developers app
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showpost.php?p=44174457&postcount=643
this .bat file just add new IP for bbs.anzhi.com

Need Camera apk

Hello all!
I have deleted camera app accidentally, now i want to reinstall it.
Can anyone will provide me the file in apk?
60 views, 0 reply
No one here to help?
I cant seem to find it in usual place, where is it stored on p6?
Sent from my HUAWEI P6-U06 using Tapatalk 4
ZeroWingUK said:
I cant seem to find it in usual place, where is it stored on p6?
Sent from my HUAWEI P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
I think it should be in the apk folder of rom, but I am not sure about this.
I cant find it sorry, tried various searches in root explorer. If you can tell me the name of the apk and where it is stored i will help further.
Sent from my HUAWEI P6-U06 using Tapatalk 4
ZeroWingUK said:
I cant find it sorry, tried various searches in root explorer. If you can tell me the name of the apk and where it is stored i will help further.
Sent from my HUAWEI P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
Bro search in ur root directory of device, it should be in this folder /system/app/Camera. Apk
It s not there, i have searched using root explorer for camera and also *.apk and i cant find it, sorry.
Sent from my HUAWEI P6-U06 using Tapatalk 4
---------- Post added at 11:29 AM ---------- Previous post was at 11:03 AM ----------
There is a tool on this forum for unpacking the huawei update.app, maybe try looking in there and extract it yourself?
Sent from my TouchPad using Tapatalk 4
You need to look for "gallery2.apk"\
EDIT: attached it in this post. have fun
ZeroWingUK said:
It s not there, i have searched using root explorer for camera and also *.apk and i cant find it, sorry.
Sent from my HUAWEI P6-U06 using Tapatalk 4
---------- Post added at 11:29 AM ---------- Previous post was at 11:03 AM ----------
There is a tool on this forum for unpacking the huawei update.app, maybe try looking in there and extract it yourself?
Sent from my TouchPad using Tapatalk 4
Click to expand...
Click to collapse
I got it Bro, it was named as gallery. Apk
Thanks for your help
Have a good day
Ok cool, i did think it could have been that, good to know anyway.
Sent from my HUAWEI P6-U06 using Tapatalk 4
Bakpoeder said:
You need to look for "gallery2.apk"\
EDIT: attached it in this post. have fun
Click to expand...
Click to collapse
THANKS bro
Successfully retrieved
Good for you,man
Bakpoeder said:
You need to look for "gallery2.apk"\
EDIT: attached it in this post. have fun
Click to expand...
Click to collapse
I can't install this in OmniROM 4.4.4. Why?
And is there a flashable zip file that I can use to install the app?
I like the stock camera app more than the built-in camera of OmniROM )
ivanskie01 said:
I can't install this in OmniROM 4.4.4. Why?
And is there a flashable zip file that I can use to install the app?
I like the stock camera app more than the built-in camera of OmniROM )
Click to expand...
Click to collapse
Old Post September 2013
It's the galery.apk of a JB rom
1. Try this one extracted from B510 View attachment Gallery2.apk put it in System\priv-app with a root file manager and reboot
or
2. Zip Flashable : View attachment 2865845 (I renamed Galery2 > Galery)
Flash in TWRP, Wipe Dalvik-Cache, reboot
EDIT :Facing some bug and FC few time but after few reboot it work fine (ParanoidAndroid) Try at your own risk
Skyllery
It's working now ) But the front camera screen flash is not working ( I'll try to reboot and see if that will solve the problem ) Thanks
Sent from my P6-U06 using XDA Free mobile app
ivanskie01 said:
It's working now ) But the front camera screen flash is not working ( I'll try to reboot and see if that will solve the problem ) Thanks
Sent from my P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
You're welcome
Thanks for this thread, now I know camera and gallery is the same app. I installed it on my new Galaxy A3-2016 (quite easy, withiout any root) because of the good panorama mode. But now all different modes are missing, are there any ideas which files I also had to copy for getting panorama-mode?
or does anyone know a good, free pano-app which takes photos with a height of abou 2000px and a width about 18000px?
Dom

Categories

Resources