Develop Bugs

[HELP & SUPPORT] Xperia Ultimate HD

Hello everybody,
This Thread is all about Xperia Ultimate HD.
Its made for you to ask your own questions, and I'm going to try my best to anwser them.
Regards,
Jader

jader13254 said:
PLEASE Post all Questions HERE!
Click to expand...
Click to collapse
hi jadar
i downloaded this nice rom.
after installing it i noticed that there is no root.
my bootloader is unloacked
what is the problem!!

xhamadeex said:
hi jadar
i downloaded this nice rom.
after installing it i noticed that there is no root.
my bootloader is unloacked
what is the problem!!
Click to expand...
Click to collapse
Kernel? Thats a bit Strange?
Sent from my LT18i using xda app-developers app

Nice rom... undoubtedly FASTEST I hv evr used.
I jst want u to add Titanium backup app + Rom control options (as we have in JJ Hybrid).
Also, does this rom support USB-OTG ??

Normally the usb hotsting function is determined by the kernel you use. The rom can simply have an integrated sys app that allows usb mounting and browsing, though even if not there are many free apps on the market that can do this easily. Doomkernel has the usb otg fucntions and so do some others though still with minor lacks of support like ntfs file systems ect.
by the way jader, what kernel do you reccomend fot usb hosting with ntf support for both usb and sd, also with swap or zram and other common tweaks?

i stuck on Sony Logo i follow the instruction....
3 time i try to install the rom... and it dont work.
any help ;(?

jader13254 said:
Kernel? Thats a bit Strange?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
I used every kernel
Adv stock
Lupus
Now I'm in lupus kernel...
Plz help
I'm waiting
Sent from my LT15i using xda app-developers app

xhamadeex said:
I used every kernel
Adv stock
Lupus
Now I'm in lupus kernel...
Plz help
I'm waiting
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
Also when I install it
There is no luncher
Sent from my LT15i using xda app-developers app

Launcher Problem solution
xhamadeex said:
Also when I install it
There is no luncher
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
same happened to me on my xperia arc. But later I found a SOLUTION in original thread, which worked for me.
1. Open the zip file in your pc
2. Go to System --apps
3. Delete some apps to free memory (I deleted 3D-Camera)
4. Now transfer this edited rom zip file to your sd card and flash in recovery
I hope it ll work ( dnt delete any file about which you are not sure)

xhamadeex said:
I used every kernel
Adv stock
Lupus
Now I'm in lupus kernel...
Plz help
I'm waiting
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
xhamadeex said:
Also when I install it
There is no luncher
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
Well, just delete some files in /system of the ROM.zip, like 3d cam....
K****iz.gautam said:
same happened to me on my xperia arc. But later I found a SOLUTION in original thread, which worked for me.
1. Open the zip file in your pc
2. Go to System --apps
3. Delete some apps to free memory (I deleted 3D-Camera)
4. Now transfer this edited rom zip file to your sd card and flash in recovery
I hope it ll work ( dnt delete any file about which you are not sure)
Click to expand...
Click to collapse
:good:

My question-
Mind replying my pm?
Sent from my MT11i using Tapatalk 2

Ringtone
Plz in next Version, Ringtone Sony Brezze
Thx
PS. :good: ROM

Stuck at logo
After smooth install, I got stuck at the sony logo like others reported before. I cannot access cwm anymore, is there anyway to get it back (since BL is locked)?
Thanks

cestmoi007 said:
After smooth install, I got stuck at the sony logo like others reported before. I cannot access cwm anymore, is there anyway to get it back (since BL is locked)?
Thanks
Click to expand...
Click to collapse
Flash original firmware with Flashtool^^

cestmoi007 said:
After smooth install, I got stuck at the sony logo like others reported before. I cannot access cwm anymore, is there anyway to get it back (since BL is locked)?
Thanks
Click to expand...
Click to collapse
Did you install the latest firmware and given advanced stock kernel by jader? btw how did u manage to install cmw recovery with a locked BL?
I'm running .587 firmware with jaders advanced stock kernel and everything works fine though i have an unlocked bootloader so everything is easier.
I guess u just have to flash another working rom.....just my opinion

My SIM toolkit seems lost, how can re-install it?

jader13254 said:
Kernel? Thats a bit Strange?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Yeah, in system/bin there's "su" and symlinking in updater-script is also set properly, so...

hi jan
i have install your ROM
very fast like a new different phone
btw in your ROM
there is pittpatt in system/vendor
what it is ?

Jader, your thread has been closed because of being spammed. So sad (

banking.amateur said:
Jader, your thread has been closed because of being spammed. So sad (
Click to expand...
Click to collapse
Thanks to all!
1. Spamming my Thread
2. Don't Give me a single day break... I really can't believe it, no one understands... I posted 1 Day Northing what happens? "i think this rom will be Discountiuned" etc...
3. Just no one understand, C'mon i have school and you just exspect every day post & updates, i'm shortly before stopping all xda work and 100% concentrate on school
Sent from my LT18 using xda app-developers app

[ ROM ] [FTF] STOCK LT26w Xperia Acro S_6.2.B.0.200 JB untouched

i just finished putting these files together FTF dropbox link coming in about an hour!
i did not see any for lt26w so here it is, screenshots below!
if you are running everything stock update using sony pc companion, if you have modded files it will fail so just use flashtool
if there are other thread for lt26w ftf, moderator please delete!
thank you!
https://www.dropbox.com/s/sg2glv19n49m77i/Xperia Acro S_6.2.B.0.200_US.ftf

http://forum.xda-developers.com/showthread.php?t=2302477
there are plenty of FTF in this thread already:silly:

i'm testing kernel include cwm by doomlord. when it's ready, we will have complete pre-rooted jb rom and i will create thread in this section use to update and fix bugs(if it happen). so that thread like this isnt necessary. just use thread in general section
Sent from my LT26w using xda premium

no need, i see there is plenty, just one question, those downloaded in asia are the same as us in US?

and thank you by the way!

BlacKca7 said:
no need, i see there is plenty, just one question, those downloaded in asia are the same as us in US?
Click to expand...
Click to collapse
Yeh,i've flashed FTF from many location,when testing pre-rooted and cwm,there are the same

Sure there is a thread in general section... But isn't this more appropriate place for it? It's android development, not general help, isn't it?

jazzgott said:
Sure there is a thread in general section... But isn't this more appropriate place for it? It's android development, not general help, isn't it?
Click to expand...
Click to collapse
that's i posted it here lol, and i barely go to general section with the little time i have!

liongvn said:
Yeh,i've flashed FTF from many location,when testing pre-rooted and cwm,there are the same
Click to expand...
Click to collapse
the base rom itself is probably the same but there is one thread here in dev that's from a different country and does include some PlayStation apps like,Sony Entertainment Network, Sony Playstation Store, if i recall it was from south east asia, Malaysia, ect.

let me know if you want help testing the pre-rooted roms

BlacKca7 said:
let me know if you want help testing the pre-rooted roms
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2305974 .
now the problem is we can't install CWM after rooted.We must waiting for new kernel from doomlord to install it .I'm testing kernel with him and it don't work now

Here is a dropbox link to version I got. Seems to be generic Asian.
https://www.dropbox.com/s/bi5tkyv4r9a85gd/LT26w_6.2.B.0.200_Generic.ftf
Sent from my LT26w using Tapatalk 2

BlacKca7 said:
i just finished putting these files together FTF dropbox link coming in about an hour!
Click to expand...
Click to collapse
So what's different between yours and my uploaded rom?
Sent from my LT26w using Tapatalk 4 Beta

nqhuy90 said:
So what's different between yours and my uploaded rom?
Sent from my LT26w using Tapatalk 4 Beta
Click to expand...
Click to collapse
Doesn't really matter does it?
As long as we have a bunch of choice of which one to use, someone will collect and organise our efforts.
Sent from my LT26w using Tapatalk 2

lukensteinz said:
Doesn't really matter does it?
As long as we have a bunch of choice of which one to use, someone will collect and organise our efforts.
Sent from my LT26w using Tapatalk 2
Click to expand...
Click to collapse
true, lol most if not all in here are downloaded in asia, if there is nay difference, grab it here

This my rom now I flash this earlier in my so-03d and I managevto root also..but I cant edit any files using root expkirer anyone can help me? Thenx in advance
Sent from my LT26w using xda premium

Why stick with an old firmware like that?

I dont know what to next sir...and I dont know yet wath kind of custom rom to flash that compatible with my so-03d hope that some one can advice me for the next step to do...
Sent from my LT26w using xda premium

[Q] Kernel - ace 2 rom stock

Guys, would like a Kernel for ace 2 because I did the upgrade to 4.2 and now the phone keeps crashing in a matter of games and music, can someone provide me the rom I'm using is the stock, thank you

4.2? 4.1.2? You on TC cm10.1 or stock 4.1?
Sent from my GT-I8160 using Tapatalk

teddytsen said:
4.2? 4.1.2? You on TC cm10.1 or stock 4.1?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
sorry rom stock 4.1.2

Change extension of your stock rom .md5 file to .zip then extract kernel.bin.md5
Connect phone to pc in download mode
Click PDA in Odin
Locate and select extracted kernel.bin.md5
Start
Wait until its done(should take about 10 sec)
Finish
Sent from my GT-I8160 using Tapatalk

teddytsen said:
Change extension of your stock rom .md5 file to .zip then extract kernel.bin.md5
Connect phone to pc in download mode
Click PDA in Odin
Locate and select extracted kernel.bin.md5
Start
Wait until its done(should take about 10 sec)
Finish
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
Friend, Please I need the kernel for ace 2 (i8160L) you can send me please?

vitoraugusto2007 said:
Friend, Please I need the kernel for ace 2 (i8160L) you can send me please?
Click to expand...
Click to collapse
i dont have L varient fw , which do you use?

teddytsen said:
i dont have L varient fw , which do you use?
Click to expand...
Click to collapse
Mine is 8160 L, but can I install another will not give me no problems

vitoraugusto2007 said:
Mine is 8160 L, but can I install another will not give me no problems
Click to expand...
Click to collapse
Friend then please help me to install a customizable rom for my I8160L has sent me as a tutorial to teach me to install. I'm from Brazil and here it is very difficult to have that staff ace 2 (8160L) I'll be very grateful.

vitoraugusto2007 said:
Friend then please help me to install a customizable rom for my I8160L has sent me as a tutorial to teach me to install. I'm from Brazil and here it is very difficult to have that staff ace 2 (8160L) I'll be very grateful.
Click to expand...
Click to collapse
replace tee folder from your phone's /system/lib to /system/lib in the custom rom you want to flash(i.e lets say cm10.2)

[STOCK ROM][FTF] Xperia ZL (C6506) 10.4.1.B.0.101 R1C Generic US

Here's the Generic North America 4.3 release for Sony. It's untouched, just zipped to pare it down to ~ 450mb chunks.
I've tested this by flashing it to my own device. Even with that, I don't guarantee this to work for you.
If you're locked boot loader, you'll want to look at Nuts thread elsewhere for files to help you stay rooted.
If you're Unlocked boot loader, you can flash this, then flash a kernel with a build-in recovery and root using the update-su file found elsewhere on XDA, then flash the kernel from this FTF again once you're rooted.
C6506_10.4.1.B.0.101_1270-7584 Generic US.zip part 1
C6506_10.4.1.B.0.101_1270-7584 Generic US.zip part 2

Thanks for this! Now will just wait for Nut's or someone who can make a rooted zip and stripped ftf for flashing...
Sent from my C6506 using XDA Premium 4 mobile app

Worked great.... Now I am in no rush for 4.4

Stupid question, but how do you flash a 2 part Rom in flash tool?
Sent from my C6506 using XDA Premium 4 mobile app

captaink85 said:
Stupid question, but how do you flash a 2 part Rom in flash tool?
Sent from my C6506 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Carefully...or not. Extracting the first zip will create a single FTF file to flash from the 2 zips.

So basically just unzip the 1st folder and that will open the 2nd zip which will create the single ftf?
Sent from my C6506 using XDA Premium 4 mobile app

The zip program should be able to detect that it is a multi-part split zip file and automatically treat the two parts as a single zip file.
7-Zip supports this, if you don't already have a zip program.

Yeah, download both, and use 7zip to decompress and you should be golden. I'd have put it up as a single file, but that method of sharing files is limited to ~ 450mb files....
Sent from my TouchPad using Tapatalk

My only issues I am having would be the auto focus on "words". Sometimes it will work well and sometimes it won't ... don't think it's as good as .569.... battery life seems a little bit better... pretty good overall....

Is there a place I can get all the firmware new and old I remember there was a site that did charge money and other sites where it was free.
Sent from my C6506 using xda app-developers app

Torres77an said:
Is there a place I can get all the firmware new and old I remember there was a site that did charge money and other sites where it was free.
Sent from my C6506 using xda app-developers app
Click to expand...
Click to collapse
Any particular version you're looking for?

scifan said:
Any particular version you're looking for?
Click to expand...
Click to collapse
I want to start with the Bell C6506 4.1 then at least I can flash that back for warranty purposes but then I can root it and flash a pre-rooted 4.3 stock Rom from there.

Torres77an said:
I want to start with the Bell C6506 4.1 then at least I can flash that back for warranty purposes but then I can root it and flash a pre-rooted 4.3 stock Rom from there.
Click to expand...
Click to collapse
I definitely don't have that...
I want to say it was 1.67 when I first started working with my 6506... and well, mine was a generic without contract...
Sent from my TouchPad using Tapatalk

Torres77an said:
I want to start with the Bell C6506 4.1 then at least I can flash that back for warranty purposes but then I can root it and flash a pre-rooted 4.3 stock Rom from there.
Click to expand...
Click to collapse
No contact but mostly I want the 4.1 so I can root it then update it even if it was a generic firmware I could still use it.
Sent from my C6506 using xda app-developers app

scifan said:
I definitely don't have that...
I want to say it was 1.67 when I first started working with my 6506... and well, mine was a generic without contract...
Sent from my TouchPad using Tapatalk
Click to expand...
Click to collapse
Ok so I'm now Rooted on 4.1 TELCEL with DoalRecovery with PhilZ Touch 6.26.6 & Clockworkmod now I joust need a preRooted 4.3 stock rom to flash
the firmware on that page for downlod don't happen to be rooted do they ? I'ma go take a look at the in the Developer section it should be around I've already done this sort of thing on the Xperia T before but I had lost that phone and found a good deal on the ZL.

hey guys,
im new at sony stuff, so some things are very different to samsung... i just unlocked my bootloader and tested some roms, but im missing all the sony stuff which´s in the stock roms. could you pls. help me to get back to the stock rom, i duno where to download the official austria/german sony firmware for my phone - flash with flashtool???

sry, dp! delete pls.

I just unlocked a new Xperia ZL c6506 locked to Claro Puerto Rico. The bloatware on the device is too much, can someone help me with the steps to load a stock android on it ?

Help for flashing an OTA zip file

Hi
Im new to this forum and i flashed my first custom ROM yesterday ... Im happy with the ROM. Actually the developer has given a new OTA zip file for flashing ... He requested to update to new version of ROM using OTA zip. But i dont know how to flash a OTA zip file to my micromax canvas 4 A210 ... Please someone help me how to flash ...
Thanks
Sent from my A210 using XDA Free mobile app

Just place the ota zip file into u r memory card.... Goto cwm recovery then update zip option....
Press thanks if I helped u...... ?
Sent from my A210 using Tapatalk

Hi ceaser thanks for your reply... I did the same as you said but i'm getting an error saying "installation aborted" ... Donno wat to do now ...
Sent from my A210 using XDA Free mobile app

vickys1038 said:
Hi ceaser thanks for your reply... I did the same as you said but i'm getting an error saying "installation aborted" ... Donno wat to do now ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
use this recovery http://forum.xda-developers.com/canvas-4/development/recovery-clockworkmod-6-0-4-8-t2739053

possible OTA file is corrupt
vickys1038 said:
Hi ceaser thanks for your reply... I did the same as you said but i'm getting an error saying "installation aborted" ... Donno wat to do now ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
it can be possible tha OTA file you are flashing might be corrupt
try asking on the ROM forum itself or tell us the name ROM NAME OR DEELOPER NAME

Im using pranjal's canvas 4 ROM ... I flashed the ver 1.1 of his ROM using SP Tools ... Im interested to upgrade to ver 3 ... But when trying to flash OTA zip file in CWM from my internal SD it says 'installation aborted'... Please help me yogesh ...
Sent from my A210 using XDA Free mobile app

vickys1038 said:
Im using pranjal's canvas 4 ROM ... I flashed the ver 1.1 of his ROM using SP Tools ... Im interested to upgrade to ver 3 ... But when trying to flash OTA zip file in CWM from my internal SD it says 'installation aborted'... Please help me yogesh ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
After 1.1 go for ota.... Or flash simultaneously the latest builds...... Got it.... ?
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........

ceasar47 said:
After 1.1 go for ota.... Or flash simultaneously the latest builds...... Got it.... ?
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
Click to expand...
Click to collapse
Hi actually pranjal released an OTA update which allows user to directly update to ver 3 from any prev versions ...
Sent from my A210 using XDA Free mobile app

I am ising the same... I hav flashed step by step
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........

ceasar47 said:
I am ising the same... I hav flashed step by step
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
Click to expand...
Click to collapse
From his page i followed all the steps
HIGHLY RECOMMENDED PROCEDURE FOR ENSURING SPEED AND PERFORMANCE!!
CAN BE FLASHED DIRECTLY OVER ANY ROM!
1. Backup your device data. Turn off your device.
2. Download Pranjal's ROM v1.1 and SP Tools.
3. Extract both the files in separate folders.
4. Run "Flash_tool.exe"
5. Click "Scatter-loading" and select the "MT6589_Android_scatter_emmc.txt".
6. Click "Download"
7. While your device is turned off, connect it via USB and SP tools will download the rom to your Canvas 4.
8. Wait for a green circle, after which turn on your device and format via settings.
9. Run "xposed installer" and click "framework" > "Install" > "ok" > "back" > "modules" > check gravity box and xuimod > reboot
10. ENJOY
11. Post your feedback!
12. FLASH THIS TOO AND RECEIVE ALL FUTURE UPDATES VIA OTA
And when i click on the 12th step it goes to a link and i downloaded the zip file with File size: 271.7 KB
Uploaded: 2014-03-24 05:14:52 ...

No need just download manual updates flushable zips... Place them in card and flash it
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........

ceasar47 said:
I am ising the same... I hav flashed step by step
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
Click to expand...
Click to collapse
Further the Ver 3 shows as follows
VERSION 3.0(30 June 2014)
DOWNLOAD HERE OR VIA OTA FROM YOUR APP DRAWER
DIRECT UPGRADE FROM ANY VERSION OF PRANJAL'S ROM TO V3 HERE :fingers-crossed:

yogesh.kalyana said:
it can be possible tha OTA file you are flashing might be corrupt
try asking on the ROM forum itself or tell us the name ROM NAME OR DEELOPER NAME
Click to expand...
Click to collapse
Im using pranjal's canvas 4 ROM ... I flashed the ver 1.1 of his ROM using SP Tools ... Im interested to upgrade to ver 3 ... But when trying to flash OTA zip file in CWM from my internal SD it says 'installation aborted'... Please help me yogesh ...
Sent from my A210 using XDA Free mobile app :fingers-crossed:

vickys1038 said:
From his page i followed all the steps
HIGHLY RECOMMENDED PROCEDURE FOR ENSURING SPEED AND PERFORMANCE!!
And when i click on the 12th step it goes to a link and i downloaded the zip file with File size: 271.7 KB
Uploaded: 2014-03-24 05:14:52 ...
Click to expand...
Click to collapse
just simply go to the second post by pranjal where he allows you to update directly to v3 fom any versions before ,and yes his ROMS are not flashable via CWM properly use sp flash tools only

yogesh.kalyana said:
just simply go to the second post by pranjal where he allows you to update directly to v3 fom any versions before ,and yes his ROMS are not flashable via CWM properly use sp flash tools only
Click to expand...
Click to collapse
Can you guide me how to update OTG file using SP flash tool ... Any procedure in detail ...
Sent from my A210 using XDA Free mobile app

or try this first
vickys1038 said:
Can you guide me how to update OTG file using SP flash tool ... Any procedure in detail ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
in your app drawer there must be an app saying OTA tap on that and try for an upgrade while your wifi or data is on
if it upgrades it is good if it does not
then here is sp tools procedure
http://forum.xda-developers.com/showthread.php?t=2466694:angel:

yogesh.kalyana said:
in your app drawer there must be an app saying OTA tap on that and try for an upgrade while your wifi or data is on
if it upgrades it is good if it does not
then here is sp tools procedure
http://forum.xda-developers.com/showthread.php?t=2466694:angel:
Click to expand...
Click to collapse
I went through the link given by you ... I would lik to know where i should place the OTG zip or what i should select ... Where to get scatter file and also how to get this OTA updated using SP tool ... Very much confused ... Please help
Sent from my A210 using XDA Free mobile app

yogesh.kalyana said:
in your app drawer there must be an app saying OTA tap on that and try for an upgrade while your wifi or data is on
if it upgrades it is good if it does not
then here is sp tools procedure
http://forum.xda-developers.com/showthread.php?t=2466694:angel:
Click to expand...
Click to collapse
Any one help me how to flash OTA file of pranjal rom using SP tool ... I flashed ver 1.1 using sp tools but now i like to know how to flash OTA zip file ... Please anyone tell where to place OTA file and what to select in scatter region...
Sent from my A210 using XDA Free mobile app

vickys1038 said:
Any one help me how to flash OTA file of pranjal rom using SP tool ... I flashed ver 1.1 using sp tools but now i like to know how to flash OTA zip file ... Please anyone tell where to place OTA file and what to select in scatter region...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
Don't worry i will ask pranjal to help you out a little
Sent from my A210 using XDA Free mobile app

vickys1038 said:
Hi
Im new to this forum and i flashed my first custom ROM yesterday ... Im happy with the ROM. Actually the developer has given a new OTA zip file for flashing ... He requested to update to new version of ROM using OTA zip. But i dont know how to flash a OTA zip file to my micromax canvas 4 A210 ... Please someone help me how to flash ...
Thanks
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
hi!
1. i think you have installed pranjals rom v1.1 with stock recovery. Please tell me the color of the text when you boot up in recovery. Is it blue or orange?
2. If you have installed with stock recovery, then it is fine, I will provide you with CWM recovery which you can flash via SP tools. It is a small file.
(please quote this text when you reply, because then I get a notification. Then I can reply faster.)
---------- Post added at 12:08 AM ---------- Previous post was at 12:03 AM ----------
For guys who are new and downloading all the updates step by step after v1.1.
1. Install pranjals rom with cwm recovery and not stock recovery. If you have stock recovery, then I will provide you with the CWM recovery. There is no need to download the full v1.1 again.
2. It is recommended to directly flash v3 direct upgrade file. You can flash it over any version of my rom. It will save a lot of data and time and confusion.
3. While doing this, do not worry about OTA. It will automatically be updated.
4. When you are fully updated, then OTA will show you some error. Do not panic, it is something I did so that the updates will be of less size.
5. If you are not fully upgraded, then OTA will show that an update is available.
---------- Post added at 12:13 AM ---------- Previous post was at 12:08 AM ----------
vickys1038 said:
Any one help me how to flash OTA file of pranjal rom using SP tool ... I flashed ver 1.1 using sp tools but now i like to know how to flash OTA zip file ... Please anyone tell where to place OTA file and what to select in scatter region...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
the zip file (which you are referring to as OTA zip file) cannot be flashed via SP Tools. It needs to be flashed by CWM recovery.