THIS KERNEL IS COMPATIBLE ONLY WITH ANDROID 4.3 BASED ROMS
If you don't know which are the 4.3 based roms this kernel is not for you!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Overclock (L5 1104mhz max, L7 1300mhz max) - Use at your own risk!!
Linaro GCC 4.8.2 Compiled
Undervolt VDD sysfs interface for configuring the voltage levels
SmartassV2, Wheatley, SmartMax, DanceDance Governor
FIOPS, SIO, DEADLINE, NOOP, CFQ Schedulers
Zram with LZ4 Compression and lots of patches
Zcache with LZ4 compression & frontswap for compressed ram ssd caching
Dynamic management of dirty page writeback
LZO Compression updated to mainline (KERNEL + RD LZO compressed)
Noatime default
Dynamic read-ahead support
Instructions:
Boot in CWM Recovery
Backup your current kernel (backup whole rom)
flash the zip
reboot
DOWNLOAD
Use at your own risk!!
Thanks:
TeamHackLG Team
Source:
GitHub
Undervolt Interface:
The current voltage information is available at:
Code:
/sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
Defaults for L5:
Code:
[email protected]:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
122880: 2
245760: 3
320000: 4
480000: 5
600000: 6
800000: 7
900000: 7
950000: 7
1000000: 7
1050000: 7
1100000: 7
To change for example the voltage level of the 800000 frequency, you could do:
Code:
echo '800000 6' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
If you cat this file again, you should see that the voltage level is picked up.
The new voltage level is picked up when the CPU will scale to the particular frequency level.
CREDITS GO TO nobodyAtall
Android 4.2 Based kernels will be released soon!!!
Does this decrease 2D/3D performance?
f3tus said:
Does this decrease 2D/3D performance?
Click to expand...
Click to collapse
yes 3d by 150 points in antutu but i tried a few games (i'm not a big game player) and i dont feel any difference even better smoothness
Awesome,test directly and send report.thanx.
GREEEETZ!!!
Look slimmbean antutu score
Instagram + Deep Sleep work
L7
does this kernel support miui v5 for L7 p705
thanks.
Good kernel,but i noticed some graphic glitshes in antutu,on first benchmark the color swapped to yello and was flicker,but boot is faster and overall performance is great,have antutu pic added,tested with paranoid 3.99.on L5 e610.
GREEEETZ!!!
pinkflozd said:
Android 4.2 Based kernels will be released soon!!!
Click to expand...
Click to collapse
thanks,great today kernel
-CALIBAN666- said:
Good kernel,but i noticed some graphic glitshes in antutu,on first benchmark the color swapped to yello and was flicker,but boot is faster and overall performance is great,have antutu pic added,tested with paranoid 3.99.on L5 e610.
Click to expand...
Click to collapse
I had similar bugs in older betas fo cm10.1, but it was sporadic glitch, try again, restart and see if still happening
I made the test with antutu and then it rebootet by himself D:
wich app should i use to overclock? Actually using No frill cpu Max freq 1,1ghz min freq 320MHz with sio I/o scheduler,
any suggestions how to make it faster o:?
Here some pics from store,look at the backround,the other is totaly messed up from scrolling.
GREEEETZ!!!
Will you release kernel for the p708?
Enviado desde mi LG-P708 usando Tapatalk 2
this is same or other kernel ! I'm on L7
http://forum.xda-developers.com/showpost.php?p=44842470&postcount=49
I'm greatful because Deep sleep works fine on e612. Thanks a lot.
richish said:
this is same or other kernel ! I'm on L7
http://forum.xda-developers.com/showpost.php?p=44842470&postcount=49
Click to expand...
Click to collapse
Older version of this kernel, this has newer features
Sent from my LG-P700 using xda app-developers app
bart452 said:
Older version of this kernel, this has newer features
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
thx
Related
Skull Kernel
Build with Linaro GCC 4.8.2 Toolchain
Only for JellyBean 4.2.2
This kernel is based on arco source. It included extra tweaks and tuning for better performance
or battery life!:fingers-crossed:
Some warning to all users before flashing away!
Please do not install this kernel on Android version other than 4.2.2
By flashing this kernel, you are accepting any results that might happen with this kernel
I'm not responsible for any damage and your warrantly might be void!
(damage seldom happen as I always get this kernel tested and ONLY release when it come stable)
NOTE !!
Install this kernel will replace the modules at system/lib/modules and will back up your original modules to system/lib/modules.bak.
Please note that you only need to restore modules if you switch to other kernel (not skull kernel), otherwise forget about it
Features
Kernel version 3.4.73
Compile with Linaro GCC 4.8.3 2013.11 toolchain by Christopher83
O2 optimization level to both module and kernel
360 MB of ram (more memory by default)
Default CPU governor: lulzactive
Default I/O Scheduling: SIO
A lot governors for user to choose:
smartassV2, interactive, conservative, ondemand, powersave, lulzactive, performance
More IO scheduler present in kernel also:
noop, deadline, row, sio, vr, cfq, bfq
Default max CPU frequency: 1401 MHz, Default min CPU frequence: 245 MHz
Overclock up to 1804 MHz & slightly undervolt
Please be aware overclocking might damage your phone!
IF YOU DON'T NEED IT, CHANGE BACK TO DEFAULT MAX CPU FREQUENCY AND LEAVE IT THERE
CPU Voltage Control (VDD Sysfs Interface)
Frandom support
Dynamic readahead size based on device disk size
Updated lzo compression to upstream version
Optimized ARM RWSEM algorithm
lib/memory & lib/string: use glibc version
Dynamic file sync
Dynamic management of cgroup timer slack
LowMemoryKiller: Management of not killable processes
ExFat file system support
Increase audio loudness
Tweak ramdisk to help with system responsiveness
Sync with arco latest changes, as always
Video
Current build
Code:
v2.0 [[URL="http://www.mediafire.com/download/0gqq3ahcs6c96uo/JB_3.4.X_skullKernel_v2.0.zip"]DOWNLOAD[/URL]]
* Build with Linaro 4.8.3 GCC 2013.11 by Christopher83.
* Switch to O2 optimization level for better performance in some scenario.
* New Feature added, LowMemoryKiller: Management of not killable processes
(now launcher is hard to kill, believe. Credit to Christopher83)
* Hopefully to fix whitescreen and its battery drain issue without using the framebuffer workaround.
[B](I need the feedback here!)[/B]
* It is 360MB of ram by default.
* Kernel 3.4.73
CWM 6.0.4.6 (7/1/2014)
[[URL="http://www.mediafire.com/download/eob59hmfwhz2sey/cwm_6.0.4.6_ancora.zip"]DL[/URL]] - [SIZE="2"][COLOR="Red"]Reboot to CWM and flash[/COLOR][/SIZE]
* Updated and build with CM11 source. (Compatible with KK)
Instruction
Boot to recovery.
Mount system and data.
Flash the kernel.
Wipe cache & dalvik cache. (Optional)
Reboot.
Done, enjoy.
Credit
arco68 (thank for his kernel source)
Christopher83 and linaro team for great toolchain
Hadidjapri, Christopher83, erik, CastagnalT, Dorimanx and other developers for help
sdfee and buffo1987 for guide on how to build cwm recovery
LeroViten for CWM flashable zip
Some github guys that I cherry-pick commit from them
anyone looking at my thread!
Google for making this possible
PLEASE PROVIDE ANY FEEDBACK AND CLICK THANKS IF YOU FIND THIS KERNEL USEFUL. APPRECIATE
Click to expand...
Click to collapse
XDA:DevDB Information
[KERNEL][CWM][CM10.1][3.4] Skull Kernel - v2.0 (linaro 4.8 | O2 | OCUV), a Kernel for the Samsung Galaxy W I8150
Contributors
Keff91
Kernel Special Features: custom kernel aim for better performance or battery life
Version Information
Status: Stable
Current Stable Version: v2.0
Stable Release Date: 2013-12-11
Created 2013-09-24
Last Updated 2013-12-12
Old build
Code:
v1.9
[[URL="http://www.mediafire.com/download/5gy2tn1h034k4x6/JB_3.4.X_skullKernel_v1.9.zip"]NORMAL[/URL]][[URL="http://www.mediafire.com/download/4h1zn71lhqs8ywa/JB_3.4.X_skullKernel_v1.9_highmem.zip"]HIGHMEM[/URL]]
* Fix CPU frequency stuck problem on lulzactive gov
* Kernel 3.4.67
v1.8
[[URL="http://www.mediafire.com/download/m308gr8o5pd2uli/JB_3.4.X_skullKernel_v1.8.zip"]NORMAL[/URL]][[URL="http://www.mediafire.com/download/9ptmn5719n235ap/JB_3.4.X_skullKernel_v1.8_highmem.zip"]HIGHMEM[/URL]]
* Added HIGHMEM version - 360 MB of free ram. (normal version indicate kernel with default ram size)
* Update exFAT source to version 1.26. (thanks dorimanx team)
* Increase audio loudness. (credit to castagnalT)
* Added CK3 tweaks. (credit to Christopher83)
* Sync with arco sources.
v1.7
[[URL="http://www.mediafire.com/download/tz1srzwj41byjo1/JB_3.4.X_skullKernel_v1.7.zip"]DOWNLOAD[/URL]]
* Fix battery indicator not show when device is powered off.
* Update exfat source from upstream.
v1.6 Ultra
[[URL="http://www.mediafire.com/download/bk7leulqbe9lf2l/JB_3.4.X_skullKernel_v1.6Ultra.zip"]DOWNLOAD[/URL]]
* Kernel updated to adapt CM10.1 Alpha 9 by arco68.
* Show 100% battery notification after unplug from fully charge.
* Added vm tweaks.
v1.6
[[URL="http://www.mediafire.com/download/j0cqs5c5pb2nl62/JB_3.4.X_skullKernel_v1.6.zip"]DOWNLOAD[/URL]]
* New build, everything start from scratch.
* Compile with Linaro GCC 4.8.2 2013.09 toolchain.
* O3 optimize level to kernel and module as well.
* Added frandom support.
* Added V(R) I/O scheduler.
* Switch ROW to SIO as default I/O scheduler. (credit to arco as explain the reason behind it)
* Update lzo compression to upstream version.
* Optimize ARM RWSEM algorithm and update RWSEM to Linux 3.10.
* Added Dynamic File Sync. (credit faux123)
* Added dynamic management of cgroup timer slack. (credit Christopher83)
* Added ExFat file system support on boot.
* Tweak low memory killer minfree.
* Added modules backup features. (copy stock modules from system/lib/modules to system/lib/modules.bak at first boot of my kernel)
* Should fix white screen issue on lcd rev. 3. (use framebuffer)
v1.55
[[URL="http://www.mediafire.com/download/0xhw2i682u2uryi/skull-kernel-v1.55.zip"]DOWNLOAD[/URL]]
* Build with Linaro GCC 4.8.2 2013.08 toolchain.
* Switch back to SLUB, should have better memory management. (thanks dorimanx and AndreiLux for fixing it)
* O2 optimization.
* Small ramdisk fixes.
v1.5
[[URL="https://docs.google.com/file/d/0B6OKL92TPp9eclIyZlZZclR4WmM/edit?usp=sharing"]DOWNLOAD[/URL]][[URL="http://www.datafilehost.com/d/3f6fc75e"]MIRROR[/URL]]
* Start everything from scratch, I really missed out alot of things :D
* Linux 3.4.58
* Build with Linaro GCC 4.8.2 201307.
* Switch from memory allocator SLUB to SLAB (this is needed if build with gcc 4.8.+, using slub just not booting)
* O3 optimization and some build flags change.
* Update to LZO compression library.
* Remove frandom but added random hack. (Need more testing)
* Tweak LMK and VM values. (thanks Christopher83)
* Kernel source updated.
[B]v1.4.1[/B]
[[URL="http://www.mediafire.com/download/ck424bnadcz2ft4/JB_3.4.X_skullKernel_v1.4.1.zip"]DOWNLOAD[/URL]]
* Use O3 optimization. (Thanks Christopher83 for help)
* Remove the highest overclock frequency. (1804 MHz cpu frequency cause the phone freezing, so remove it)
* Revert few commits from arco. ([URL="https://github.com/Keff/samsung-kernel-msm7x30/commit/7c4bd1fb75ba02d25d8f703c0b1598f2b8b5be1e"]1[/URL], [URL="https://github.com/Keff/samsung-kernel-msm7x30/commit/533beabc98bbedd4a51aaf46b28e866ba3af9fdd"]2[/URL]) - Probably cause the hang issue.
[B]v1.4[/B]
[[URL="http://www.mediafire.com/download/3x3r3chc7691of2/JB_3.4.X_skullKernel_v1.4.zip"]DOWNLOAD[/URL]]
* Build with Linaro GCC 4.8.1-2013.05 toolchain from Christopher83
* Simplified optimization build flags used.
* Switch to O2 optimization and use SLAB allocator. (To ensure kernel boot successfully that build with GCC 4.8.1 toolchain)
* Added wifi tweak to help less power drain with WIFI on. (credit Dorimanx)
* Some changes on ramdisk. (Added tweaks, eg. VM tweak, SD read_ahead tweak and MORE)
* Kernel 3.4.48
[B]v1.3[/B]
[[URL="http://www.mediafire.com/download/zp17zr4rj2u32jz/JB_3.4.X_skullKernel_v1.3.zip"]DOWNLOAD[/URL]]
* Based on CyanogenMod 10.1 Alpha 6 by arco68.
* Optimized auto-scheduler and enable it also.
* Update and fix lulzactiveW governor. (thanks erik and dorimanx for helping me to solve mistake)
* Update Dynamic File Sync to latest. (thanks faux123)
* Modified some compilation flags and restore 02 optimization for module. (still testing, but nothing harm for now)
* Increased audio loudness. (thanks CastagnaIT)
* Enable Gentle-Fair-Sleepers again for better sleep hence saving battery.
* Bug fixes and update to both hyper and intellidemand governor. (thanks CastagnaIT)
* Fix frandom not working properly. (Thanks Madridii for reported issue)
* Hacked random and urandom for frandom. (always use frandom in every situation now)
* Enhance init.d support. (copy scripts to etc/init.d and reboot. It will AUTO set rwx-rx-rx permission and run it for you !!)
* Kernel 3.4.47.
[B]v1.2[/B]
[[URL="http://www.mediafire.com/download/pvpvdcd62v8v3sh/JB_3.4.X_skullKernel_v1.2.zip"]DOWNLOAD[/URL]]
* Based on CyanogenMod 10.1 Alpha 5 by arco68. (means kernel [B]NOT[/B] compatible with old CM10.1 build)
* Remove FIOPS ioscheduler. (reported lag and quite useless as well)
* Updated wifi drivers and should bring back wifi tethering. (credit goes to arco)
* Fix WEP connection. (credit goes to ivendor and arco also)
* Build with latest Linaro GCC 4.7.4-2013.05 toolchain from Christopher83.
* Small kernel fixes.
* Kernel 3.4.46.
[B]v1.1[/B]
[[URL="http://www.mediafire.com/download/b7moqcww5w9qawv/JB_3.4.X_skullKernel_v1.1.zip"]DOWNLOAD[/URL]]
* Added Intellidemand governor.
* Added FIOPS ioscheduler.
* Removed pop-up noise at the end of power off. (credit CastagnalT)
* Added CPU Voltage Control. (e.g. allows you to control CPU voltage through [URL="https://play.google.com/store/apps/details?id=com.incredicontrol&feature=more_from_developer#?t=W251bGwsMSwxLDEwMiwiY29tLmluY3JlZGljb250cm9sIl0."]IncrediControl[/URL] app)
* Allow overclock up to 1804 MHz and slightly undervolt by default.
* Kernel 3.4.44.
[B]v1.0[/B]
[[URL="http://www.mediafire.com/download/q9aorajuq69iq4s/JB_3.4.X_skullKernel_v1.0.zip"]DOWNLOAD[/URL]]
* Initial release.
* Temporary bluetooth fix. (File transfer work)
* Introduce a new cpufreq governor call lulzactiveW. It's maintained by erik.
First ... Thank you .. Awesome
Sent from my GT-I8150 using xda premium
Great work bro. Thanks...
GT-I8150 cihazımdan Tapatalk 2 ile gönderildi
Thanks
Thanks
To those use spirit fm, can help to test on this kernel, is it work?
Thanks buddy.
working spirit fm :good:
Im using row+hyper, ksm and 16bit on+seederV7, is there a better settings for gaming and daily? This one good enough,smooth with no lags,just curious. Great joob for this kernel :thumbup:
Sent from my GT-I8150 using xda premium
are wifi thetering work in this kernel ?
woowww, thanks for this kernel and you, great man
Why no 360mb+ RAM?
Sent from my GT-I8150 using xda app-developers app
yeah same question wheres the 360+ ram go ?
ianfebriyanto said:
are wifi thetering work in this kernel ?
Click to expand...
Click to collapse
Thetering on but can't be detected so its not working, wifi works,bluetooth works,haven't found any other issues
Whats the details of LuzlactiveW ,I think its a new one
sent from my Xperia J and Galaxy W with customized ICS
dollyaja said:
Thetering on but can't be detected so its not working, wifi works,bluetooth works,haven't found any other issues
Whats the details of LuzlactiveW ,I think its a new one
sent from my Xperia J and Galaxy W with customized ICS
Click to expand...
Click to collapse
He talked abt that governor on the OP I'm trying it out after this :thumbup:
Sent from my GT-I8150 using xda app-developers app
gdonanthony said:
yeah same question wheres the 360+ ram go ?
Click to expand...
Click to collapse
I hate less ram
Sent from my GT-I8150 using xda app-developers app
TiTAN-O-One said:
He talked abt that governor on the OP I'm trying it out after this :thumbup:
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Just tried with row scheduler,it works good on temple run oz and subway surfer ,but I put seeder v7, don't know if not
sent from my Xperia J and Galaxy W with customized ICS
dollyaja said:
Thetering on but can't be detected so its not working, wifi works,bluetooth works,haven't found any other issues
Whats the details of LuzlactiveW ,I think its a new one
sent from my Xperia J and Galaxy W with customized ICS
Click to expand...
Click to collapse
Tethering not work with stock ARCO kernel ...
Wait for resolving from ARCO
Sent from my GT-I8150 using xda premium
Madridii said:
Tethering not work with stock ARCO kernel ...
Wait for resolving from ARCO
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
usb tethering works, but it gets buggy when you turn off the screen.
DISCONTINUED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, here I'm introducing a custom kernel for our Moto X Play, based on Squid Kernel . Full credits goes to him:fingers-crossed:. I only added some tweaks and more is coming soon. No more blah blah...
Features:
Reduced VFS cache pressure
Disabled noatime and nodiratime
Dirty ratio tweaks
Enabled Arch power and Disabled GFS
Asynchronous I/O latency to a solid-state disk greatly increased
Optimized SLUB
VM_MAX_READAHEAD set to 1024 kbytes
Optimize apply_slack for size and speed - thanks to varunchitre15
Forward port Dynamic Fsync to Linux 3.10 by varunchitre15
Disabled MMC CRC check
Enabled some extra TCP Congestion Controls
Use all cores on-boot for faster bootup
HMP-aware task placement
Code:
[B]CPU Hotplugs:[/B]
[SIZE=2][STRIKE]Bricked Hotplug[/STRIKE]
MSM Hotplug
[STRIKE]MAKO Hotplug
ZEN_DECISION Hotplug
AUTOSMP Hotplug
MSM SLEEPER[/STRIKE][/SIZE]
Code:
[B]CPU Governors:[/B]
[SIZE=2]LIONFISH
SMARTMAX
BLUACTIVE
SMARTASS2
INTELLIACTIVE
INTERACTIVE_PRO
ZZMOOVE
ALUCARD
BARRY_ALLEN
BIOSHOCK[/SIZE]
How to install:
Download Phoenix kernel flashable zip
Copy it into SD Card
Reboot into custom recovery
Install zip from SD Card
Credits:
squid2 (for the GPL source)
varun.chitre15 (for the GPL source)
Kunal.Kene.1797 (for the GPL source)
HridayHS (for the GPL source)
Shoaib05 (for the GPL source)
Motorola
XDA
Google
Missed you ? sorry pm me I'll add you
Downloads:
See the attachment or Download
*** v1.5 and above are not compatible with Stock 5.1 roms ***
Click to expand...
Click to collapse
XDA:DevDB Information
Phoenix Kernel, Kernel for the Moto X Play
Contributors
AnoopKumar, squid
Source Code: https://github.com/HelllGuest/phoenix_kernel_lux
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-10-24
Created 2015-10-24
Last Updated 2016-02-18
Change log
v1.0 2015 October 24
Initial release
v1.1 2015 November 03
Up to date with Squid Kernel
Added frandom
Network speedup tweak
kernel/sched/fair: reduce latency
power: process: drecrease time to enter sleep
defconfig Enable NTFS,CIFS
Added intelliactive - Paul Reioux
Added smartass2 - Erasmux
Added bluactive - Mike Chan,engstk
Added interactive_pro - Mike Chan
Added smartmax-maxwen
v1.2 2015 November 14
Up to date with Squid Kernel
Added Bricked Hotplug - showp1984
Added MSM Hotplug - myfluxi
Disabled IOSCHED_TEST
v1.3 2015 November 26
Updated Lionfish
Wake mod s2s added
Disabled Bricked Hotplug and added MSM Hotplug as default
v1.4 2015 December 26
Up to date with Squid Kernel
Reduced swappiness to 30
Reduced lag
Some minor fixes too
v1.5 2016 February 08
Up to date with Squid Kernel
Linux 3.10.96
Reduced lag
Improved smoothness
Updated Powersuspend
Adreno idler by arter97
320K AAC Encoding
SELinux: permissive
Compiled with Phoenix GCC 5.2
v1.6 2016 February 18
Up to date with Squid Kernel
Overclocked CPU + GPU
Added zzmoove - Zane Zaminsky
alucard - [email protected]
barry_allen - Javier Sayago
bioshock - James Jamison
Added support for CRC Toggle
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Optimized Task-Search for upto 6% increase in Performance
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Enabled High-Priority WorkQueue for DevFreq
Fixed High-Load Average due to Drivers
Fixed Reporting of GPU Frequency
MSM_HOTPLUG: min 2 cpu while screen off
msm8939: overclock lux big cluster to 1709 MHz
msm8939: overclock lux little cluster to 1209 MHz
msm8939: overclock GPU to 700MHz
Aren't hotplugs like MSM hotplug, bricked hotplug etc. meant for qcom quad core/krait CPUs? I'm not sure how they'd behave on big.LITTLE. Even the governors, I'm not sure they are adapted to big.LITTLE.... could you shed some light on it? Also, your commit history looks like a kang job.... you should clear that out.
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
AnoopKumar said:
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
Click to expand...
Click to collapse
Tbh cherry-picking commits doesn't need a fast internet connection. (I myself have picked commits on a 512 kbps internet) and credits need to be given in the commit, otherwise it counts as a "kang".
Also, credits for bricked hotplug and alucard hotplug etc. haven't been given even in the thread.
Pardon me.. I will fix it give me some time
AnoopKumar said:
Pardon me.. I will fix it give me some time
Click to expand...
Click to collapse
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Nice work AnoopKumar. Added to index
eskamhl said:
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
Click to expand...
Click to collapse
Thank you for the feedback.. Some issues are removed and added new zip
Quasar said:
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Click to expand...
Click to collapse
Bro removed all kanged commits.
Perfect, working 100%!!
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
No more additional cpu governor on the last version?
Nico3d3 said:
No more additional cpu governor on the last version?
Click to expand...
Click to collapse
Actually I removed them because of some authorization issues...
Abravanelsenor said:
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
Click to expand...
Click to collapse
Stay tuned its coming in the next version.
AnoopKumar said:
Stay tuned its coming in the next version.
Click to expand...
Click to collapse
Possible to incorporate D2W?
Thanks :good:
possible installation in the RR 5.5.8 ? No Bootloop ?
FilipeRgz said:
possible installation in the RR 5.5.8 ? No Bootloop ?
Click to expand...
Click to collapse
Currently i'm on pac rom, not faced any bootloop.
brom25 said:
Possible to incorporate D2W?
Thanks :good:
Click to expand...
Click to collapse
Im working on that too. Only sweep2sleep working now
AnoopKumar said:
Currently i'm on pac rom, not faced any bootloop.
Click to expand...
Click to collapse
I'll back up and install for testing, thanks
I present tiltkernel!
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
It's based on @BlueFlame4 super work, with something extra.
Updated to Linux 3.10.94
dt2w and Pocketmod
ThunderQuake Engine 1.0 - Vibration Intensity Controller for MTK vibrators
Secured
init.d support
CFQ and BFQ IOScheduler
CIFS and NFS
Interactiveplus, Pegasusq and stock CPU governors
westwood and cubic TCP congestion control
Removed various debug and logging stuff
Compiled with latest UBERTC 5.3 toolchain and Cortex-A53 optimizations
Dynamic Fsync Control
mmc: disable crc check for 30% extra performance in IO
Ramdisk
MTK: removed HUGE trail of MTK kernel logging
Increased READAHEAD to 1024 for better I/O performance
And lots of other kernel options...
Source: https://github.com/tiltkoko/android_kernel_elephone_p8000.git
Changelog:
Code:
v1.6:
* Linux 3.10.94
* Updated toolchain
* Default to NOATIME and NODIRATIME for FS performance improvement
* 100+ other patches. Look at the source.
* Fixed fingerprint sensor
* Improved wifi
v1.5:
* Fixed touch zoom bug
* Fixed ThunderQuake Engine
* Removed 1.5 GHz step
v1.45:
* updated to 3.10.93
* Dynamic Fsync Control
* mmc: disable crc check for 30% extra performance in IO
* Tweaked IO scheduler for better performance
* NFS
* BFQ default IO scheduler
v1.4:
* Fixed "youtube" bug
* kernel update fixes and some network patches
* Updated with Eragon init.d fix.
* ARM Cortex-A53 compiler optimizations
v1.3:
* Updated to the new Elephone sources
* Increased VM_MAX_READAHEAD to 1024 for better I/O performance
* Changed to UBERTC toolchain and O3 optimization
* Added Pegasusq CPU Governor
* Some other fixes
v1.21:
* Removed multicore scheduler.
* Added interactiveplus cpu governor
* Fixed some really stupid stuff introduced in v1.2
v1.2:
* Huge update to 3.10.92!
* Disabled some more debug stuff.
* Fixed button wake up.
v1:
* Initial version.
Install:
Rashr or fastboot
Props:
@BlueFlame4
@varun.chitre15
skeleton1911 for Eragon
showp for DT2W
and XDA!
Whats next:
Think it's stable now, so expect new version in a while
I am on #elep8k on freenode IRC network if you want to say hello!
FAQ
F.A.Q
Q. How to use the features?
A. Most of the features are controllable via TricksterMod app
Q. How to use ThunderQuake Engine?
A. With ThunderQuake Engine you can control vibration intensity at hardware level. There are 7 levels of intensities supported
Using Terminal Emulator/ADB shell use following command
Code:
echo "your-value-here" > /sys/kernel/thunderquake_engine/level
Valid values: 0-7
Question:
Is it real 1.5Ghz or is it "1.5Ghz", which actually runs at 1.3Ghz but at higher volts (as it happens in most Mediatek devices when one tries to overclock)?
TricksterMod and benchmark scores indicate 1.5Ghz. That's good enough for me.
Stevethegreat said:
Question:
Is it real 1.5Ghz or is it "1.5Ghz", which actually runs at 1.3Ghz but at higher volts (as it happens in most Mediatek devices when one tries to overclock)?
Click to expand...
Click to collapse
This was already discussed in my kernel thread. They're real, because the kernel already supports it and we just unlocked the frequency. Also benchmarks indicate that it's real.
NTFS is not supported.
NTFS formatted SD-card is not mounted in system at all.
Thank you very much for your kernel I'm too happy .
I installed TricksterMod app and set dt2w , BFQ IOScheduler , westwood TCP and ZRAM .
How do I set NTFS and CIFS and Multicore scheduler ?
You may also upgrade your kernel to version 3.10.92 , please ?
BlueFlame4 said:
This was already discussed in my kernel thread. They're real, because the kernel already supports it and we just unlocked the frequency. Also benchmarks indicate that it's real.
Click to expand...
Click to collapse
Sorry, last I remember it was 30% slower than MT6752 (which basically would show no difference than the 1.3ghz clocks).
Maybe I'd have to run Phoronix's Linux workload via chroot if the results are as inconclusive as I remember them. Phoronix's benchs show things like throttling with surgical precision (it only cares about load, not mhz, so when there's sudden gap in performance that would be throttling). Of course I'd have to get the phone in my hands first (my wife rarely let's me to "pet" it anymore ).
OsitKP said:
NTFS is not supported.
NTFS formatted SD-card is not mounted in system at all.
Click to expand...
Click to collapse
The ROM has to support it as well and stock doesn't But a 3rd party app would do it as well, AFAIK.
I do not have a microSD card yet (ordering one soon). What do work with SD-cards, fat32? ext4?
@stefano91av Multicore scheduler is built in, so nothing to do there.
The kernel sources has a lot of backports etc, especially in the arm code. So it's not that easy to get to the latest kernel. I will get there eventually, just give me some time.
I am not an expert at this stuff, learning as I go.
Has someone played with ThunderQuake?
tiltkoko83 said:
What do work with SD-cards, fat32? ext4?
Click to expand...
Click to collapse
FAT32 definetely does.
My p8000 om eragon 5. Freeze just after reboot.
Flashed it with fla****y. Tryid booth versions.
All version of Blues kernel works without problems.
Any suggestion?
wierd micbanand..
I am still on eragon 4. My and Blues kernel is using same source, so should be no difference. Tried with Rashr?
Finished with updating to 3.10.92. Uploading after I have tested it a few hours...
Uploaded new kernel with 3.10.92 added. There are so much debug stuff in the sources it's crazy. Found some hidden stuff when I updated..
Now I am tired. Was a lot of work..
Thanks. But freezes. Reboots frezes. Tryid all 3 kernels. And allso updated to eragon 5,5
This time flashed with Rashr.
Now I'm trying v1.21.
With v1.20 there were jamming in the videos of facebook when I received messages from whatsapp . In addition, the score was AnTuTu 29000
heh that bad. I did some stupid stuff there.
I got almost 35000 with 1.21.
Will try to improve on the wakeup lagg tomorrow.
I too can confirm that flashing this kernel over Eragon 5.6 results in a bootloop. Well, it's not exactly a bootloop, since the phone finishes botting and you can also unlock the screen, but less that a minute it restarts, and this happens over and over again. I tried rebooting the phone into safe mode before it reboots itself, but in safe mode it also reboots suddenly.
wierd. Every kernel I have build has booted fine for me.
New version with updated sources ++ coming later tonight.
Waiting for new kernel
[size=+1]Welcome to Skatter Kernel forum.[/size]
Today I am very proud to release the Skatter Kernel to you guys, I've done hundreds of tests to see what features function well, and which one's don't. The idea behind this kernel is to be able to customize it the way you want, with the best battery possible
Now... let's take a look and see what's inside this bad boy.
Click to expand...
Click to collapse
Skatter Kernel-v2 is a complete rewrite of v1. What makes this version of the kernel so special?
It's faster, even more stable, and has the ability to run any governor from a 3.10.y kernel.
I've ran many tests and can say, these governors have been playing very nicely with our d2 device. I have not added any junk commits, or any that would cause any battery drain. Also I'm sorry for anyone on marshmallow... but kernel from now on is only going to be nougat and up.
Also I would like to make an introduction to my "Skateractive" governor! :victory:
What does the Skateractive governor do anyways?
Code:
This governor is based on the linux 3.10.y Interactive governor.
I've written it to be mostly a "screen-off profiling" governor.
Meaning, I've added tunables that allow you to customize the governor while the screen is off.
These are...
Timer_rate_multiplier: Name speaks for itself, how many times to multiply timer_rate on screen off. Max number is 10.
Screen_off_maxfreq: Set the limit the max frequency can be reached on screen off.
Screen_off_maxfreq_single_core: If you're like me and use hotplugs you'll notice it can get a bit laggy with music playback when one core is online & max freq is 702mhz. So add a frequency limit for when only one core is online and the screen is off. :good:
* Not a tunable: But enabled powersave bias on screen off & on screen-on back to normal.
Also stripped governor of any unneeded code. For best performance.
Features
* Compiled with a highly optimized Uber 7.x TC
* Tons of optimizations (-Ofast, Graphite, Cortex-A15) and lots more :good:
* CPU UC/OC from 162MHz to 1836Mhz
* Set to Permissive
* Net Speed Tweak
* Decreased time to enter deep sleep
* Optimized GPU
* Enabled Low Power Memory Mode
* Quick Wakeup Driver
* Some Aggressive Seeder Tweaks
* Optimized Square Root Algorithm
* More memory from loggers (Cause the more RAM, the better)
* Screen Tweaks for filling blank spots with more color
* Voltage Table, for your UV/OV Needs
* Tweak to disable Powersuspend when State Notifier is enabled.
* Set standby frequency to 54Mhz.
* Tweaked to lower Thermal throttle on screen off.
* UKSM for better ram, set to not consume so much battery.
* Frandom.
Decimalman's features
* Overclocked GPU to 600, modded & upped to 750Mhz.
* And his super badass tierservative & freelunch governors :good:
* Fast charge patch, no need to diconnect :good:
* Tiered GPU Governor, very nice with frequencies.
Faux123's Features
* Fauxsound
* Powersuspend v1.7
* Dynamic Fsync
* Simple GPU Governor
I/O Schedulers
* Sio
* Sioplus
* V(r)
* Noop
* Zen
* Fifo
* TripNDroid
* Fiops
* Maple
Hotplugs
* MPDecision
* Bricked Hotplug
* Blu_Plug
* Thunderplug v5.4
* AutoSMP
* Intelliplug
* Alucard
* State Helper
* MSM Hotplug
* Skater Hotplug
x MSM Sleeper
x Zen Decision
CPU Governors
* Alucard
* Blu_Active (Latest version)
* Chill
* Conservative (3.10.y version)
* Cultivation
* Cyan (For those gamers, do not use with hotplugs.)
* Darkness
* Despair
* ElementalX v2
* Freelunch
* Interactive
* Lionfish
* Lionheart
* NIghtmare
* Ondemand (3.10.y version)
* Performance
* Powersave
* Relaxed
* Skateractive (Default)
* Skatter_Core
* Smartmax
* Smartmax_EPS
* Tierservative.
Instructions
1.) Make... a... [size=+1]BACKUP[/size]
2.) Download kernel & copy it to sdcard
3.) Flash
4.) Wipe dalvik-cache & cache
5.) Most importantly, Enjoy :good:
Downloads
Right Here
Modded Kernel Adiutor
Right Here
* If anyone needs a mirror link, just ask and I will upload
Contributors
* A special thanks to @bthorne79 for helping me get started on this
* Another special thanks to the beast himself @decimalman
for helping me with a ton of noob questions & especially for the patchs:good:
@faux123 for all his awesome features
@neobuddy for helping me out with the blu_plug driver
@invisiblek for keeping this awesome device alive
@canodroid15 for running my test builds :highfive:
Everyone at CM & everyone else who I forgot
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
XDA:DevDB Information
Skatter Kernel, Kernel for the T-Mobile Samsung Galaxy S III
Contributors
Lonelyskatter12, bthorne79, decimalman
Source Code: https://github.com/Lonelyoneskatter/skatter_d2_kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-01-29
Created 2016-09-30
Last Updated 2017-11-03
Kernel sounds interesting, but the link is dead for me. Can you repost it?
Link is broke. Please post working link. Looking forward to trying this kernel out
Daemondancer said:
Kernel sounds interesting, but the link is dead for me. Can you repost it?
Click to expand...
Click to collapse
hatchet13rydin69 said:
Link is broke. Please post working link. Looking forward to trying this kernel out
Click to expand...
Click to collapse
Links up, let me know what you guys think :good:
Downloading now will report back with results
Edit.....
So far it very fast and responsive. Battery life is excellent especially considering the fact that I need a new battery as the one I'm using is very old and doesn't like to hold a charge. Will upload screenshots of battery stats after work.
Keep up the awesome work!!!!!!!! :good:
hatchet13rydin69 said:
Downloading now will report back with results
Edit.....
So far it very fast and responsive. Battery life is excellent especially considering the fact that I need a new battery as the one I'm using is very old and doesn't like to hold a charge. Will upload screenshots of battery stats after work.
Keep up the awesome work!!!!!!!! :good:
Click to expand...
Click to collapse
The purpose of this kernel my friend battery & performance I'd love to see some stats & thank you I will :victory:
Lonelyskatter12 said:
The purpose of this kernel my friend battery & performance I'd love to see some stats & thank you I will :victory:
Click to expand...
Click to collapse
Sorry for not getting back to you with stats and screenshots. Had some family issues that couldn't be left unattended. I'm sorry to say that my s3 was unfortunately stolen from me before I had uploaded my results to my drive account. I will say that this kernel made my device perform like new. Which was amazing as the battery was on its last leg. I wonder if this kernel could be built for the Samsung Galaxy Core Prime SM-G360T1? If you need anything to do so let me know. Still kinda a noob but with a lil guidance I can get any source codes you may need for this device. Let me say this was a truly magnificent piece of work for the s3. Thanks in advance
Was running the kernel on OctOs-M and it was quite good. I started using SlimRom though and it seems that your kernel doesn't play nice with it. Everything seems ok but my SIM isn't detected. Using the SlimRom kernel the problem doesn't happen. Would love to use this kernel again!
Compatibility question.
I like the way this sounds, but I've only ever flashed ROM's. Never a Kernel. I was wondering if this kernel would work with what I'm running right now?
### My current build info
ro.build.PDA=T999UVUEMJC
ro.build.characteristics= tmo
ro.build.display.id= JSS15J.T999UVUEMJC
ro.build.fingerprint= samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys
ro.build.hidden_ver= T999UVUEMJC
ro.build.product= d2tmo
ro.build.version.codename= REL
ro.build.version.incremental= T999UVUEMJC
ro.build.version.release= 4.3
ro.build.version.sdk= 18
ro.board.platform= msm8960
###KERNEL INFO
Linux
3.0.31-1804024
#1 SMP PREEMPT Sat Oct 5 00:13:48 KST 2013
armv7
GNU/Linux
Please let me know, thank you.
HollyWood88 said:
I like the way this sounds, but I've only ever flashed ROM's. Never a Kernel. I was wondering if this kernel would work with what I'm running right now?
### My current build info
ro.build.PDA=T999UVUEMJC
ro.build.characteristics= tmo
ro.build.display.id= JSS15J.T999UVUEMJC
ro.build.fingerprint= samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys
ro.build.hidden_ver= T999UVUEMJC
ro.build.product= d2tmo
ro.build.version.codename= REL
ro.build.version.incremental= T999UVUEMJC
ro.build.version.release= 4.3
ro.build.version.sdk= 18
ro.board.platform= msm8960
###KERNEL INFO
Linux
3.0.31-1804024
#1 SMP PREEMPT Sat Oct 5 00:13:48 KST 2013
armv7
GNU/Linux
Please let me know, thank you.
Click to expand...
Click to collapse
I was running this kernel on the same model and baseband with spirit rom Kit Kat 4.2.2. It was definitely a huge improvement over the stock kernel. Very responsive and great battery life. I would definitely recommend this kernel. Just make sure to make a backup of your old kernel in twrp manager before. Better safe than sorry.
OK, I'll give her a whirl and see how it does. Thanks @hatchet13rydin69
WHOOP WHOOP!
hatchet13rydin69 said:
I was running this kernel on the same model and baseband with spirit rom Kit Kat 4.2.2. It was definitely a huge improvement over the stock kernel. Very responsive and great battery life. I would definitely recommend this kernel. Just make sure to make a backup of your old kernel in twrp manager before. Better safe than sorry.
Click to expand...
Click to collapse
HollyWood88 said:
OK, I'll give her a whirl and see how it does. Thanks @hatchet13rydin69
WHOOP WHOOP![/QUOTE)
Don't thank me. All thanks go to lonelyskatter12 for his work on this awesome kernel and to all those that helped him compile it and test it. Hoping maybe we could get something like this for the Galaxy Core Prime
Click to expand...
Click to collapse
I have to say, it's a very nice kernel in terms of giving out great performance. However, every Rom i flash this kernel in, it seems to break the functionality of my baseband causing an error for my sim card not to detect. It's with the latest build of OCT-M-R3 build 10/25 and Slim Roms build 10/29 that I tried out with.
Any fixes for it?
Help
I'm new to this....Only flash ROM's...No Kernel yet.
My last update on my SGH-T999 is....cm-13.0-20161104-NIGHTLY-d2tmo
So for me is it good solution to flash that kernel on my phone?
I see there's a lot of function and updates that I don't have.
Thank You!!
:good:
Maxrom said:
I'm new to this....Only flash ROM's...No Kernel yet.
My last update on my SGH-T999 is....cm-13.0-20161104-NIGHTLY-d2tmo
So for me is it good solution to flash that kernel on my phone?
I see there's a lot of function and updates that I don't have.
Thank You!!
:good:
Click to expand...
Click to collapse
Just wait for the next kernel update, I hear SIM isn't detected on newer ROM updates.
And its easy.
1.) Copy zip to sdcard
2.) Wipe dalvik-cache & cache
3.) Flash kernel zip
4.) Reboot
5.) Enjoy it cx
Lonelyskatter12 said:
Just wait for the next kernel update, I hear SIM isn't detected on newer ROM updates.
And its easy.
1.) Copy zip to sdcard
2.) Wipe dalvik-cache & cache
3.) Flash kernel zip
4.) Reboot
5.) Enjoy it cx
Click to expand...
Click to collapse
Thank's Lonelyskatter12 ......For the SIM issue...It doesn't bother me.
I don't have a sim install on that phone.
I use it for testing and educational purpose....
:good::good:
[size=+1]Changelog[/size]
* Added 2 governors (Intellidemand & Ondemandplus)
* Added Power Efficient Workqueues
* Added The Intelli_plug 5.2 driver
* In sync with CM
* Added OOM throttle
* A few hotplug fixes. Still have more to do but this'll do until they are more stable.
* Added toggle for Gentle Fair Sleepers & Arch Power
[size=+1]Note:[/size]
*** Even tho linux version still says 3.4.112 it has the necessary patches for the "Dirty COW" exploit. Linux version will remain 3.4.112 as I have chosen to wait until CM officially merges 3.4.113 ***
thanks to @canodroid15 for notifying me & @decimalman for confirming the patch is in the kernel :highfive:
Wooty woot woot! ? Thy master is at it again! ??
Lonelyskatter12 said:
[size=+1]Changelog[/size]
* Added 2 governors (Intellidemand & Ondemandplus)
* Added Power Efficient Workqueues
* Added The Intelli_plug 5.2 driver
* In sync with CM
* Added OOM throttle
* A few hotplug fixes. Still have more to do but this'll do until they're are more stable.
* Added toggle for Gentle Fair Sleepers & Arch Power
[size=+1]Note:[/size]
*** Even tho linux version still says 3.4.112 it has the necessary patches for the "Dirty COW" exploit. Linux version will remain 3.4.112 as I have chosen to wait until CM officially merges 3.4.113 ***
thanks to @canodroid15 for notifying me & @decimalman for confirming the patch is in the kernel :highfive:
Click to expand...
Click to collapse
Is the sim issue fixed? I'd like to try this kernel
Sent from my SGH-T999 using XDA-Developers mobile app
Shack70 said:
Is the sim issue fixed? I'd like to try this kernel
Sent from my SGH-T999 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes
QUARK KERNEL For Moto G4 Plus (Lineage Extended)
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Click to expand...
Click to collapse
INTRODUCTION:
Hello everyone, this is my personal kernel for the Moto G4 Plus. This version is based on Lineage OS kernel source with some additional patches.
FEATURES:
Compiled using linaro 6.3.1
Init.d support
Disabled Gentle fair sleepers
USB Turbo Charge Support
Added FIOPS I/O Schedule
Added SIO I/O Scheduler
Added BFQ scheduler
Governors enabled:
Lionfish
Dancedance
Lionheart
Smartass2
Bioshock
Nightmare
Alucard
Conservativex
CPU Hotplug Enabled
Added bunches of TCP Congestion Algorithm
CPU Boost
zRAM Support
Fingerprint Sensor As Home
LED Notification While Charging (Thankz to @vache)
ZRAM Compression
Adreno idler
Dynamic fsync
DownloadsGet it here
Instructions
Flash through TWRP
Credits/Thanks:
- Mororola for sources
- linus for his amazing kernel source
- @vache and @Shreps for base kernel source
Compatibility
- Will work on any roms using LineageOS kernel source as base. (LineageOS,Beanstalk,AOSPExtended,OctOS)
- You can try on other roms and report me back . (if enforcing didn't work try permissive. Be patient while the kernel boots.)
- If you find sensors doesn't work .use this
- If your root breaks.. flash su
XDA:DevDB Information
Quark Kernel, Kernel for the Moto G4 Plus
Contributors
rahulsnair
Source Code: https://github.com/rahulsnair/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2017-03-18
Changelog
1.0
-Initial Release
1.1
-Added Zen I/O Scheduler
2.0
-Switched to Sabermod toolchain
-Now supports Android N based roms
05012017
-Switched back to UBERTC-6.0
-Synced to CM kernel source
25012017
-Using linaro from now on
-ZRAM compression
-Adreno idler
-LZ4 ZRAM compression
-Dynamic fsync
@rahulsnair Nice work Buddy
You are on fire my friend
do u know if this will work on your teamoct os?
Dont know how, dont know why but i installed and i dont know why but everything works good
It works great in CM 13.0 XT1641
A can confirm that it works on octos xt1622 smooth as and great kernel thanks dev for the rom and kernel keep up the good work??
Working great so far on RR xt1625. You're killing it.
Is this kernel for custom ROMs only, or will it work with stock too?
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
skalnas said:
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
Click to expand...
Click to collapse
Wich ROM are you using? I also have xt1625 want to test
:good:
Teamoct os
rahulsnair said:
Changelog
1.1
-Initial Release
1.1
-Added Zen I/O Scheduler
Click to expand...
Click to collapse
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Krsambhav16 said:
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Click to expand...
Click to collapse
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
doomed151 said:
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
Click to expand...
Click to collapse
Okay Bro Thanx, I Thought That My Cores Have Been Damaged.
Bootloop in (xt1626) rom Temasek's CM13 - v11
Did the download link disappear or am I just dumb and can't see it
khaoticking said:
Did the download link disappear or am I just dumb and can't see it
Click to expand...
Click to collapse
Is there, see again
Hello, just report. This Kernel work very well on my XT1642 with the last RR ROM. Good luck.