T989 Boot Loop Question - T-Mobile Samsung Galaxy S II SGH-T989

Guys/Gals,
I have an issue with my T989 that just arose over the weekend. First a little background about my experience and what has been done to the phone. I had the phone rooted with various versions of JB installed around a year ago. I was basically trying different firmwares, it was like a hobby. I decided to go back to stock FW around this same time (around a year ago) and have been running stock since then. In other words, I did not keep custom FW on the device very long.
This weekend, my phone just decided to crash when I was trying to send a text. I thought maybe the battery was dead so I plugged the phone in. The phone came up and goes through the progress bar located on the "Samsung Galaxy SII Android 4G Tmobile" screen. It gets almost all the way to the end of the progress bar and then shuts down and reboots starting the process over again. Occasionally it will make it all the way through and go to the "Samsung" flash screen that normally proceeds getting into the actual OS. When it does make it this far, the Samsung logo just keeps flashing and it never proceeds further.
I try to enter download mode via power + the up and down volume keys. Doing this leads me to the start of download mode; however, the droid falls over dead with a red triangle and exclamation point appearing around his stomach area and the following message appears for a moment before rebooting:
"
--Verifying internal MMC block
checksum confirmation -> check (0)
Not need checksum confirmation
already executed!!...
# MANUAL MODE #
"
One big problem with this is I cannot enter download mode and my PC does not recognize the device. When it actually makes it to the SAMSUNG logo, the device is seen as "unknown." I have the drivers and try to install them, but windows provides the following error message: I don't have it verbatim, but it is an error 29 and states the devices firmware failed to allocate resources.
Any ideas? I am leaning towards the internal memory is damaged. Do you think a JIG stick would help me get into download mode or will I probably get the same error message?
Thanks!

Not sure if this will fix your problem, but to get into download(Odin) mode you need to hold volume up + down and plug USB into your computer.

meekrawb said:
Not sure if this will fix your problem, but to get into download(Odin) mode you need to hold volume up + down and plug USB into your computer.
Click to expand...
Click to collapse
Thanks for the reply. I am able to initiate download mode as you described, but receive the error I described above almost immediately. Download mode just won't launch. The device errors out and I get the droid with the red triangle coming out of his stomach and the device reboots. I just ordered a USB jig. Hopefully it can save my device. I am not liking my chances.

braggtd said:
Thanks for the reply. I am able to initiate download mode as you described, but receive the error I described above almost immediately. Download mode just won't launch. The device errors out and I get the droid with the red triangle coming out of his stomach and the device reboots. I just ordered a USB jig. Hopefully it can save my device. I am not liking my chances.
Click to expand...
Click to collapse
If you take out the battery and put it back in does the phone turn on by itself? It kind of sounds like you may have a sticky power button. If that is indeed the problem, there is some stuff you can try near the end of this thread:
http://forum.xda-developers.com/showthread.php?t=1931310

What does it cone up as when it does get seen by PC is it just unknown or does it say qalqcom something...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

meekrawb said:
If you take out the battery and put it back in does the phone turn on by itself? It kind of sounds like you may have a sticky power button. If that is indeed the problem, there is some stuff you can try near the end of this thread:
http://forum.xda-developers.com/showthread.php?t=1931310
Click to expand...
Click to collapse
Sounds like my phone..Same issues..It's on its third trip to Samsung today... If it's under warranty, I'd express you want the board replaced along with the power button components.....They replaced all my components except the board, and they're doing that this time... .

soupysoup said:
What does it cone up as when it does get seen by PC is it just unknown or does it say qalqcom something...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just "unknown." It only shows this when it actually gets to the glowing "Samsung" logo. It does not see the device at all when it is in reboot over and over mode.

I would agree with smokin Joe then, I'd call Sammy and id check ur powers button as it may ba stuck....
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

smokinjoe2122 said:
Sounds like my phone..Same issues..It's on its third trip to Samsung today... If it's under warranty, I'd express you want the board replaced along with the power button components.....They replaced all my components except the board, and they're doing that this time... .
Click to expand...
Click to collapse
Thanks for the info. No warranty left. I am going to order a Nexus 4 I suppose. I have a USB jig on order as a last ditch effort to get into download mode.

braggtd said:
Thanks for the info. No warranty left. I am going to order a Nexus 4 I suppose. I have a USB jig on order as a last ditch effort to get into download mode.
Click to expand...
Click to collapse
Its not too hard to remove the power button and put on another. Its also a hell of a lot cheaper than getting a new phone. Its worth a shot id say. Button is less than 5 bucks. A reputable electronics shop would likely only charge 10 bucks to solder it on if you disassemble it and have everything ready. Its easy to remove the entire logic board. Before taking it to them though, try blowing the button out with compressed air. It fixed my bootloop
Sent from my SGH-T889 using xda app-developers app

meekrawb said:
Not sure if this will fix your problem, but to get into download(Odin) mode you need to hold volume up + down and plug USB into your computer.
Click to expand...
Click to collapse
pyraxiate said:
Its not too hard to remove the power button and put on another. Its also a hell of a lot cheaper than getting a new phone. Its worth a shot id say. Button is less than 5 bucks. A reputable electronics shop would likely only charge 10 bucks to solder it on if you disassemble it and have everything ready. Its easy to remove the entire logic board. Before taking it to them though, try blowing the button out with compressed air. It fixed my bootloop
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I opened the phone and tried the fix from the forum link above. My power button is still clicking and does not appear to be sticking. I don't think this is the issue. I am leaning towards internal memory error. I should have my usb jig tomorrow. I ordered a Nexus 4 in the mean time. I will sell this phone if I get it working. Thanks for the assistance!

Well guys and gals, I think my phone is officially dead. I received my USB JIG and the phone actually goes into "download mode" and displays the following:
Factory Mode
Product Name: SGH-T989
Custom Binary Download: No
Current Binary: Samsung Official
The problem is the PC still sees it as "unknown" with the firmware error "29" message. I don't know what else to try. Any other thoughts?
Thanks!

Related

HELP! i think i bricked my new galasy s 2

i just bought the tmobile galaxy s 2 and was trying to root it. obviously i did something wrong and now its stuck on a black screen. it will not power on AT ALL and when i plug it into the usb it looks for driver QHSYSB_DLOAD. ive tried everything someone please help. i will pay someone to fix my phone if i have to
You need to get in download mode and odin back to stock. Pull battery and put back in. Go to different computer, win XP works best, download/install drivers on PC then plug phone in to PC and download mode should come up.
Sent from my SGH-T989 using xda premium
Also you may have to hold both volume buttons down. It works both ways with and without volume buttons. Search threads how to get in download mode.
Sent from my SGH-T989 using xda premium
k2worldwweapon said:
i just bought the tmobile galaxy s 2 and was trying to root it. obviously i did something wrong and now its stuck on a black screen. it will not power on AT ALL and when i plug it into the usb it looks for driver QHSYSB_DLOAD. ive tried everything someone please help. i will pay someone to fix my phone if i have to
Click to expand...
Click to collapse
It's bricked. I had the same thing happen a few days ago. Just take it back to the T-mobile you bought it from (assuming you bought in-store) and they'll replace it. Seeing your phone recognized as that "QHSYSB_DLOAD" device seems to be an issue with Qualcomm CPUs and happens mainly to HTC phones for obvious reasons. From the hours of research that I did before returning my phone, no one has ever successfully recovered from that kind of brick.
i bought it used so tmobile wont replace it. BUT i registered the phone on samsungs website and it says its still in warranty with them. do you think samsung could replace it?
Yeah I'd do that. They should be able to help you out as long as you don't say you were trying to root it lol. Yours won't vibrate or anything when you press the power button right?
nope it doesnt vibrate. what do you think of this?
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
i dont understand how you can screw up such an easy process...
i obviously didnt know what i was doing.. thats how
G1_enthusiast said:
i dont understand how you can screw up such an easy process...
Click to expand...
Click to collapse
hey chill out bro, if he bricked it that was a mistake. dont make him feel worse than he is now...
Sent from my SGH-T989 using XDA App
here try this!
DOWNLOAD MODE
power off phone
pull out battery
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode
yea my bad man, i was being mean, hope it work out for you.
movieaddict said:
here try this!
DOWNLOAD MODE
power off phone
pull out battery
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode
Click to expand...
Click to collapse
yea i tired that but it didnt work
k2worldwweapon said:
nope it doesnt vibrate. what do you think of this?
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
Click to expand...
Click to collapse
Yup, mine wouldn't vibrate either. The only sign of life was when it was plugged into the PC in an attempt to get into download mode. I read that when you get to the point where the phone can't even get into download mode properly(showing the usual warning about custom OSes, that the jig device won't work, unfortunately. It may be worth a shot though if the price is right.
just shipped out to samsung. hopefully they dont realize why its broken and try to charge me for it

[Q] Need help with phone not turning on.

My friend's S2 is having the following issues:
The phone will not turn on (Darkside 3.6 ROM with DarksideX Kernel). The phone will show the Samsung logo, the Darkside X kernel flash and then it would shut off. It will then have a constant vibration ever 2 seconds or so.
I tried going into recovery mode to try and wipe all the caches, but the phone will not let me go into recovery mode at all. It will give me the constant vibration mentioned above.
I'm guessing the issue is being caused by Kernel crash so I tried going into download mode so I could try and flash a new Kernel via Odin, but once I get into the warning screen and I press volume up to go to download mode, the phone go into download mode for a split second before shutting off and go into the constant vibration mode again.
Any idea what's going on? Or did anyone have had these problems in the past?
I flashed her phone a few months ago and it's been working flawlessly until last night. So I know it's not a bad flash. I'm getting frustrated here because I can't keep the phone turned on long enough to re-flash or to ODIN or to do anything.
Any help is appreciated!
Try letting it sit for a couple of minutes, the battery might have drained too much. This happened to me before I hope this helps, every once in a while when it turns off and on try to boot into recovery and just reboot back out to restart the phone to a normal boot.
Sent from my SGH-T989 using xda premium
Daddy_617 said:
Try letting it sit for a couple of minutes, the battery might have drained too much. This happened to me before I hope this helps, every once in a while when it turns off and on try to boot into recovery and just reboot back out to restart the phone to a normal boot.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I've tried letting the phone sit for hours.
I've tried unplugging and then plugging back in and not touching it for hours.
I've tried charging the battery to 100% (with my phone) and then putting it in my friend's phone.
Nothing's working
Sounds like the power button may be stuck, or a hardware failure.
xcrazydx said:
Sounds like the power button may be stuck, or a hardware failure.
Click to expand...
Click to collapse
Power button is definitely not stuck.
I'm worried that it's hardware failure, but the phone is still under warranty and if that's the case, I'm trying to get this back to stock so I can claim the warranty.
belly1026 said:
Power button is definitely not stuck.
I'm worried that it's hardware failure, but the phone is still under warranty and if that's the case, I'm trying to get this back to stock so I can claim the warranty.
Click to expand...
Click to collapse
This happened to a couple people a while ago. One had some lint or corrosion on the battery contacts, they cleaned it, and that fixed it.
skrambled said:
BOOM!!!! I fixed it!!!!!!!!!!!!!!!!!!!!!!!!!
I knew it was a battery or battery connection issue. I removed the back plating and noticed that there was some lint on the inside that was bridging the battery connections (I don't know the tech terms, sorry).
Used some air duster and blew it out. Reassembled and it is working like a charm now.
(If Joosty is reading this, I did a factory data reset--including USB storage--immediately so no worries about any personal data you may have had on there.)
EDIT: For anyone trying this fix just thought I'd mention that I used a 1/16 screwdriver to get the screws out and that getting the cover off was a little tricky--I thought I was going to break the plastic when trying to pop it off. Also, the volume rocker button falls right out so make sure to watch for that...
Click to expand...
Click to collapse
From this thread
http://forum.xda-developers.com/showthread.php?t=1546174
xcrazydx said:
This happened to a couple people a while ago. One had some lint or corrosion on the battery contacts, they cleaned it, and that fixed it.
From this thread
http://forum.xda-developers.com/showthread.php?t=1546174
Click to expand...
Click to collapse
Tried doing that just now, didn't work
Thanks for the link though. I'm wondering if that jtag service could repair this. Nobody on that thread seemed to actually tried that method.
belly1026 said:
Tried doing that just now, didn't work
Thanks for the link though. I'm wondering if that jtag service could repair this. Nobody on that thread seemed to actually tried that method.
Click to expand...
Click to collapse
I would bet he can fix it, whether it be a hardware or software issue. Mobiletechvideos does good work from what I hear.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
dongle
bought 3.00 usb dongle on Ebay, that forced mine brick into download mode. Reflashed through Odin
Try to just put the battery in and hold the volume up and down button while it keeps booting up and down with the vibration thingy going on. It usually just boots into recovery might take a few tries just be patient and hold down the volume up and down buttons
Sent from my SGH-T989 using xda premium
Happened to me when I put a née battery in while the phone rebooted into recovery. I ref lashed recovery and let the battery recharge bam it worked.
Sent from my SGH-T989 using xda premium
Daddy_617 said:
Try to just put the battery in and hold the volume up and down button while it keeps booting up and down with the vibration thingy going on. It usually just boots into recovery might take a few tries just be patient and hold down the volume up and down buttons
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion, but I've tried this and didn't work. I was pressing the vol up and down button so long for so many times, my fingers started to hurt lol.
Madblaster6 said:
Happened to me when I put a née battery in while the phone rebooted into recovery. I ref lashed recovery and let the battery recharge bam it worked.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Battery is 100% charged and the phone will not boot into recovery
Damn... I guess you should try a jig, that's the only thing I have in mind. Sometimes you need to take everything out such as the sim card, Sdcard etc... let sit for 5 minutes then try to put the battery in to go into download mode. Last time I was getting so frustrated and noticed the USB cable was still in and that was the reason I couldn't get into recovery I was so heated! Haha anyways I hope this helps.
Sent from my SGH-T989 using xda premium
Daddy_617 said:
Damn... I guess you should try a jig, that's the only thing I have in mind. Sometimes you need to take everything out such as the sim card, Sdcard etc... let sit for 5 minutes then try to put the battery in to go into download mode. Last time I was getting so frustrated and noticed the USB cable was still in and that was the reason I couldn't get into recovery I was so heated! Haha anyways I hope this helps.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yeah, I'm ordering a jig and hoping that it would force my phone to download mode and keep it on long enough for me to flash new kernel or stock rom.
But I did try letting the phone sit overnight before attempting anything to it with no results. If the jig doesn't work, I'm just going to send it in for the JTAG service. I e-mailed them and they said they would be able to fix it.
What??
belly1026 said:
Yeah, I'm ordering a jig and hoping that it would force my phone to download mode and keep it on long enough for me to flash new kernel or stock rom.
But I did try letting the phone sit overnight before attempting anything to it with no results. If the jig doesn't work, I'm just going to send it in for the JTAG service. I e-mailed them and they said they would be able to fix it.
Click to expand...
Click to collapse
This does not make sense. First, were you able to go into download mode using Vol up+down and USB cable plugged in to computer? If you can, then press vol up to continue and start ODIN on your desktop, flash the stock ROM (download from the Galaxy S2 Android Dev threads) and see if that works.
To me this does not sound like a hardware but more like a corrupt software issue.
I hope you just don't waste your money for nothing here.
belly1026 said:
once I get into the warning screen and I press volume up to go to download mode, the phone go into download mode for a split second before shutting off and go into the constant vibration mode again.
Click to expand...
Click to collapse
razormight said:
This does not make sense. First, were you able to go into download mode using Vol up+down and USB cable plugged in to computer? If you can, then press vol up to continue and start ODIN on your desktop, flash the stock ROM (download from the Galaxy S2 Android Dev threads) and see if that works.
To me this does not sound like a hardware but more like a corrupt software issue.
I hope you just don't waste your money for nothing here.
Click to expand...
Click to collapse
As I'd mentioned in my first post, I'm able to go into download mode, but I'm unable to keep the phone turned on for me to do anything with ODIN.
I'm hoping that by using the JIG, it will somehow force my phone to stay in download mode long enough for me to flash.
That happened when my phone's Seidio battery had some liquid spilled on it. It did the same exact thing but I used my stock battery to boot it, let the phone run from the charger and replaced the battery. That fixed it for me. Try using another battery.
aranurea said:
That happened when my phone's Seidio battery had some liquid spilled on it. It did the same exact thing but I used my stock battery to boot it, let the phone run from the charger and replaced the battery. That fixed it for me. Try using another battery.
Click to expand...
Click to collapse
I've used three different batteries. No go.
Thanks for the suggestion though.
No problem. If your gonna return it, either brick it or stock it
Sent from my Ice Cream Sandwiched Darkside T989.
did you manage to fix it?
I have the same problem! please help

Hard Bricked my Epic- Will I have to make an assurion claim?

Now before you say its not hard bricked, just use odin/download mode bla bla bla, know that I do know what I am talking about. I was odining WITH PARTION ON to go from mtd to bml and my computer power cut out. Now I can't turn my phone on OR get into download mode . I looked into th e unbrickable mod but apparently that's just more of an untested thing (at least for the epic). That pretty much means I can only get a new phone (probably get the note 2). However I was wondering for the time being if I turned this into sprint, assuming they don't know whats wrong with it and i play dumb, Will they just replace my phone cause I have tep? Or will i have to make an assurion claim? Or should i use an old crap phone for the next 3 weeks until i can get my gnote 2?
A month or so ago, I thought I had hard bricked from an odin disconnect. I searched & tried EVERYTHING and couldn't get it to DL mode. Somewhere in XDA I stumbled on a suggested unbrick method that amazingly worked. I wish I could find that post & hit Thanks.
- Close the keyboard
- Put the battery in
- Press the power button TWICE with short presses
- Plug in your USB cable
- Use 1+Power to fire up DL Mode
- Voila!!
I know it sounds overly simple, but it worked for me. I was shocked.
Al
Sent from my SPH-D700 using xda app-developers app
arschend said:
A month or so ago, I thought I had hard bricked from an odin disconnect. I searched & tried EVERYTHING and couldn't get it to DL mode. Somewhere in XDA I stumbled on a suggested unbrick method that amazingly worked. I wish I could find that post & hit Thanks.
- Close the keyboard
- Put the battery in
- Press the power button TWICE with short presses
- Plug in your USB cable
- Use 1+Power to fire up DL Mode
- Voila!!
I know it sounds overly simple, but it worked for me. I was shocked.
Al
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I don't know why, but they seemed to work...thank you!
Well, I guess my memory isn't so hot. I found the original post here. The instruction should have been to press the power button twice with the the battery OUT. I'm glad it worked for you anyway.:laugh:
Al
arschend said:
Well, I guess my memory isn't so hot. I found the original post here. The instruction should have been to press the power button twice with the the battery OUT. I'm glad it worked for you anyway.:laugh:
Al
Click to expand...
Click to collapse
My friend told me it had something to do with waiting for the static something or other to clear with the battery out...so it may not have been your method. Just the two hours i got frusturated and didn't do anything with it and the battery out.
samdsox said:
My friend told me it had something to do with waiting for the static something or other to clear with the battery out...so it may not have been your method. Just the two hours i got frusturated and didn't do anything with it and the battery out.
Click to expand...
Click to collapse
this drains the power out of the phone board, you could also unplug the battery and plug the phone into a WALL charger while holding power and 1, then after you get into download mode plug the battery in and take it to the usb for odin.
samdsox said:
Now before you say its not hard bricked, just use odin/download mode bla bla bla, know that I do know what I am talking about. I was odining WITH PARTION ON to go from mtd to bml and my computer power cut out. Now I can't turn my phone on OR get into download mode . I looked into th e unbrickable mod but apparently that's just more of an untested thing (at least for the epic). That pretty much means I can only get a new phone (probably get the note 2). However I was wondering for the time being if I turned this into sprint, assuming they don't know whats wrong with it and i play dumb, Will they just replace my phone cause I have tep? Or will i have to make an assurion claim? Or should i use an old crap phone for the next 3 weeks until i can get my gnote 2?
Click to expand...
Click to collapse
If its been 30 days you can go back to any sprint store and they have to give you a new one. I've done it. not for the s3 but for other phones. Thats considered a manufacturers defect.

SOLVED: HELP NEEDED!!! Note 2 wont turn on. BadgeProvider and Samsung has stopped!!!!

As the title reads my Note 2 will not turn on. It will not go into recovery mode. I have 5 batteries and none of them are working. Yesterday I got 2 weird messages that "BadgeProvider" and "Samsung" has stopped. The phone started acting weird by not letting me use anything but the notification bar. I couldn't even turn it off using the power button. I removed the battery and reinserted the battery a couple of times and still it didn't work only letting me use the notification bar. Finally it started working for some random reason and I restarted the phone and all was well.
I'm so use to having 5 batteries that I did not have the phone on the charger last night and it died. Now the phone will not turn on at all. Not into recovery mode. Not normal mode. It is totally unresponsive. Tried rapidly touching the contacts with the battery contact and nothing. What can I do to get my phone working????????????
Also to add to this, yesterday when I was taking the phone's battery out and in the phone would start booting by itself. Could this be a power button issue? I've only had the phone for about 10 months and never dropped it without the otterbox defender series on it.
1shotsniper said:
Could this be a power button issue? I've only had the phone for about 10 months and never dropped it without the otterbox defender series on it.
Click to expand...
Click to collapse
From that statement above, having the otter box doesn't mean you'll be protected against drops. Yes it'll protect the phone but still suffered inside the device! I had a friend crack his screen on the corner, with an otter box on with one drop!
Now back to the phone:
Since you can get into recovery have you tried a factory data reset to see if that fixes your problem..
Just my 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Bajanman said:
From that statement above, having the otter box doesn't mean you'll be protected against drops. Yes it'll protect the phone but still suffered inside the device! I had a friend crack his screen on the corner, with an otter box on with one drop!
Now back to the phone:
Since you can get into recovery have you tried a factory data reset to see if that fixes your problem..
Just my 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
He said that he can't get into recovery mode. He said it won't turn on at all.
mrtopdog2000 said:
He said that he can't get into recovery mode. He said it won't turn on at all.
Click to expand...
Click to collapse
It was turning on if you read the whole post!!
Hey I try to help here, but most of the time the people never come back to check to see if they got a response.
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Bajanman said:
It was turning on if you read the whole post!!
Hey I try to help here, but most of the time the people never come back to check to see if they got a response.
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I plan to read all responses as soon as I can because I'm in dire need of help. The phone WILL NOT turn back on. The first day I had the problem it gave me the "BadgeProvider" has stopped working and also the "Samsung" has stopped working error messages. The only thing that was responsive was responsive was my notification bar. I could slide it down turn wifi on and off etc from there but when I hit the setting button on the notification bar it would not open up the settings immediately and there was maybe a 2 minute delay (I walked away from the phone and came back to it) and it would finally open it up but giving me the 2 error messages "BadgeProvider" and "Samsung" has stopped working. Read online that clearing the BadgeProvider data under "Application Manager->All->BadgeProvider" would fix this issue so thats what I did. Wallah it worked fine.....fell asleep without my phone on the charger and it died but I have 5 batteries so who cares. Woke up noticed the phone was dead then I swapped batteries (OEM Samsung battery). Tried to turn it on and it will not turn on. Tried putting it on the charger (even though it should be a freshly charged battery) and the red charging light will not even come on. Tried to boot into recovery mode and still unresponsive.
As of now I CANNOT boot into revovery mode, turn on the phone in any way, get the charging light to come on when plugged in (I have 5 other batteries plus an external battery charger so its definitely not truely dead battery wise), I cannot get the phone to do anything what so ever. Tried removing external storage from it, tried removing sim, tried 5 different fully charged batteries and nothing.
Anyone that can give me some insight on what the problem may be and a possible solution I would greatly appreciate it.
Bajanman said:
It was turning on if you read the whole post!!
Hey I try to help here, but most of the time the people never come back to check to see if they got a response.
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
True, true.....Or, they post the same question in five forums....lol.
What do you guys think about using Odin? Can he get into the phone if it won't go to recovery? Can you install TWRP or CWM, they may automatically set the phone to restart in recovery mode? Just some thoughts....I am not a dev., just an avid user.
Something here might help as well. :
http://forum.xda-developers.com/showthread.php?t=2052779
Keep us posted on what you try, and your status. Good luck.
Also if it helps any, I have had my phone restart by itself randomly way before rooting it. After rooting I still had the restarts just as I have always had (maybe once every 3 weeks). Rooting it gave me no errors at all and it has been working fine for months being rooted. Not sure if letting you guys know of the restarting issue is going to help anything but I'm telling you all I know to try to debug this issue.
1shotsniper said:
As of now I CANNOT boot into revovery mode, turn on the phone in any way, get the charging light to come on when plugged in (I have 5 other batteries plus an external battery charger so its definitely not truely dead battery wise), I cannot get the phone to do anything what so ever. Tried removing external storage from it, tried removing sim, tried 5 different fully charged batteries and nothing.
Anyone that can give me some insight on what the problem may be and a possible solution I would greatly appreciate it.
Click to expand...
Click to collapse
So there is no power at all, not even a loop. I had a similar problem with a LePan tab, but when I plugged it into my laptop via USB, it would start.....Sorry. Sounds hardware....
Good luck
1shotsniper said:
As the title reads my Note 2 will not turn on. It will not go into recovery mode. I have 5 batteries and none of them are working. Yesterday I got 2 weird messages that "BadgeProvider" and "Samsung" has stopped. The phone started acting weird by not letting me use anything but the notification bar. I couldn't even turn it off using the power button. I removed the battery and reinserted the battery a couple of times and still it didn't work only letting me use the notification bar. Finally it started working for some random reason and I restarted the phone and all was well.
I'm so use to having 5 batteries that I did not have the phone on the charger last night and it died. Now the phone will not turn on at all. Not into recovery mode. Not normal mode. It is totally unresponsive. Tried rapidly touching the contacts with the battery contact and nothing. What can I do to get my phone working????????????
Click to expand...
Click to collapse
Bajanman said:
It was turning on if you read the whole post!!
Hey I try to help here, but most of the time the people never come back to check to see if they got a response.
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I did read the whole post, hence my reply. Towards the end of his post, he says that the phone won't turn on at all. Maybe you should read the whole post.
dmxinc said:
So there is no power at all, not even a loop. I had a similar problem with a LePan tab, but when I plugged it into my laptop via USB, it would start.....Sorry. Sounds hardware....
Good luck
Click to expand...
Click to collapse
Thanks man. I'm thinking it's hardware too. Herd of motherboard problems early on with this phone that would cause it to randomly shut off and not come back on.
Has ANYONE had any experience with samsung repair centers???? Do they care if the device is rooted even if its a known hardware issue?
Thanks for any help
mrtopdog2000 said:
I did read the whole post, hence my reply. Towards the end of his post, he says that the phone won't turn on at all. Maybe you should read the whole post.
Click to expand...
Click to collapse
Yes I understand that. And let me tell ya I did read the whole thing lol.
You don't read the OP you miss everything...
1shotsniper said:
Thanks man. I'm thinking it's hardware too. Herd of motherboard problems early on with this phone that would cause it to randomly shut off and not come back on.
Has ANYONE had any experience with samsung repair centers???? Do they care if the device is rooted even if its a known hardware issue?
Thanks for any help
Click to expand...
Click to collapse
I've read a few people having that problem with the phone randomly turning off.
[Q] did you get the phone New or used? If its used you have a lot of people out there selling devices with problems that they couldn't fix! FYI
#2
Does it get recognized by the PC?
When you plug it in? If so then you should be able to try the Kies recovery!
If not then kies won't help..
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Bajanman said:
I've read a few people having that problem with the phone randomly turning off.
[Q] did you get the phone New or used? If its used you have a lot of people out there selling devices with problems that they couldn't fix! FYI
#2
Does it get recognized by the PC?
When you plug it in? If so then you should be able to try the Kies recovery!
If not then kies won't help..
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I brought it directly from AT&T new. And nope. Tried pluggin it into the PC and not recognized. Tried Kies and Odin and neither had any affect. The phone is just completely unresponsive now.
Thinking about trying to take it to Samsung before AT&T so I can try to miss the deductible.
Remove the battery ...then plug the device in to USB connection with your PC...
Then attempt to boot the phone into download mode..
If successful ....then immediately push the rooted stock rom from Mr. Robinsons thread in the development section...
If no download mode exists while attempting boot with the battery removed ...then the likelihood of device damage is high...
This of course does not rule out the possibility of a stuck power button ...but that hardware failure generally presents a repeated and uncontrolled loop which in this case we are not seeing...
Odin mode failure generally means a defective or damaged Chipset...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
gregsarg said:
Remove the battery ...then plug the device in to USB connection with your PC...
Then attempt to boot the phone into download mode..
If successful ....then immediately push the rooted stock rom from Mr. Robinsons thread in the development section...
If no download mode exists while attempting boot with the battery removed ...then the likelihood of device damage is high...
This of course does not rule out the possibility of a stuck power button ...but that hardware failure generally presents a repeated and uncontrolled loop which in this case we are not seeing...
Odin mode failure generally means a defective or damaged Chipset...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. Just tried it but still doesn't work. I'm going to try to bring it to Samsung repair center today. Hopefully they can fix/replace it very very soon....TODAY :crying: . Will update the thread of any useful info that I receive.
1shotsniper said:
Thanks. Just tried it but still doesn't work. I'm going to try to bring it to Samsung repair center today. Hopefully they can fix/replace it very very soon....TODAY :crying: . Will update the thread of any useful info that I receive.
Click to expand...
Click to collapse
Ok since you want to take it in to Sammy. And you did state you got it New from the AT&T store. Then you can take it into one of the DSC. (Device support center)
Check HERE:
http://www.att.com/esupport/article.jsp?sid=KB91429&cv=820#fbid=CS_QLPeF54-
Hopefully there's one in your area. I have one like 10 mins away from me
Hopefully they can help you get back up and running. No charge either. It's a warranty center. Member no Rom talk in there.. LOL:sly:
But if they can't get it to turn on you'll be getting another the same day. Takes about a total of 15 minutes and you'll be on your way with your new toy!! Yay and good luck to you. Lety us know what you're outcome is!
Just my 3¢® <_>
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Bajanman said:
Ok since you want to take it in to Sammy. And you did state you got it New from the AT&T store. Then you can take it into one of the DSC. (Device support center)
Check HERE:
http://www.att.com/esupport/article.jsp?sid=KB91429&cv=820#fbid=CS_QLPeF54-
Hopefully there's one in your area. I have one like 10 mins away from me
Hopefully they can help you get back up and running. No charge either. It's a warranty center. Member no Rom talk in there.. LOL:sly:
But if they can't get it to turn on you'll be getting another the same day. Takes about a total of 15 minutes and you'll be on your way with your new toy!! Yay and good luck to you. Lety us know what you're outcome is!
Just my 3¢® <_>
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks. There are a few in my area. Hopefully I don't get lost since I won't have a gps
1shotsniper said:
Thanks. There are a few in my area. Hopefully I don't get lost since I won't have a gps
Click to expand...
Click to collapse
You're welcome bruh... lol
on the GPS...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Got a new phone. It was a painless process. Just walk in play dumb and talk as least as possible. They never asked a question about rooting. I'm guessing because I seemed like an idiot . Going to let it do all the updates it can then going to root it tomorrow using CFroot.
Thanks all for the info.
Anyone reading this in the future let me know if I can help in anyway.
Glad you got a new device ..and for the record ...I personally believe you had a bad device from day 1...
Normally I would frown on anyone taking back a device that has been modded ...but I can see no evidence in your case that indicates your doing anything that would break your chipset ...
And I know that others feel the same way ...
You tried your guts out ...and the device just didn't act properly from day 1...
Please place a "Solved" in the thread title if you don't mind ...
That way ...everyone knows the issue has been corrected ..
Many thanks ...and....
Happy flashing ....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Really could use your help!

So I'm not new by any means to xda or fixing electronics of any sort so I'd not be here asking for ALL possibilities of assistance I can get. .. Throw any possible solution you can my way as it can't hurt to try most ideas.
I'm working on my brothers SPRINT model galaxy S3. This thing is in pristine condition never dropped always in his Otterbox.
It will not power on so I cannot get into download mode however I can, if I finagle it enough get glimpses of the screen flashing on so I can see the battery icon for 5 seconds like it wants to power on
He bought a brand new battery direct from Samsung yet when plugged in via Samsung Wall charger nothing. .. No charging light zilch. If I try the USB charger that came with it nothing either.
No lights. No powering on. No way to get into download mode to try to bring it back from literally working before going to bed then he said he woke up and it was like a brick.
Any idea if there is a way to get this working again seeing that I get no power at all?
Thanks
Sent from my SPH-L720 using XDA Premium 4 mobile app
dead s3
Jessooca said:
Just wondering if making a USB jig might be worth a shot to get this at least into download mode
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
power button is bad sudden death syndrome on the s3 replace the power button theyre cheap
Jessooca said:
Just wondering if making a USB jig might be worth a shot to get this at least into download mode
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'd have to agree with @MIKEY309 on this one. It sounds like a power button issue. I would think you'd have at the least a charging light, because even when it's powered off it displays a charging battery on the screen. Jigs are cheap and easy, and good to have on hand, so I say give that a shot, at least, and if that doesn't work, then go the button route. Good luck!
MIKEY309 said:
power button is bad sudden death syndrome on the s3 replace the power button theyre cheap
Click to expand...
Click to collapse
Sent from my SPH-L710 using XDA Premium 4 mobile app
It must likely is the power button, but try pulling the battery out & give it about ten minutes… put the battery back in & try powering it back up. I know it sounds stupid but give it a try, I had something like this happen to me before & this worked for me. Good luck.
Jessooca said:
Thanks guys, I was actually pretty sure it was the ever so infamous failed power switch on the board, which everything I have done and tried suggests so. I just thought perhaps maybe there was a possibility it could be fixable without having to get that power switch replaced.
I can slap it against my leg and voila, it always vibrates and attempts to power on, sometimes It'll stay powered on, I did get it into download mode and used a stock firmware file to Odin it back to stock, my only concern is that darn Custom Binary Trip counter now, I may just find a local shop to see if they'll replace it for less than $50 I am also considering buying a bad esn/ or cracked screen Sprint SIII to swap out the boards with, unless someone has one to donate. For now though I'll be without a phone until I can afford to get it replaced.
Thanks again!
Click to expand...
Click to collapse
Sprint don't care if your rooted...if it's that button they should take care of you
because it's such a known issue.
http://i.imgur.com/qrByUGN.jpg
I know this is going to sound too simple to work. But have tried blowing Compressed Air on the power button ? The kind that's used on keyboards.
prboy1969 said:
I know this is going to sound too simple to work. But have tried blowing Compressed Air on the power button ? The kind that's used on keyboards.
Click to expand...
Click to collapse
I forgot all about that man...I've hear it working for others...sometimes little debris gets in there and messes it up...I'd definitely try this.
http://i.imgur.com/qrByUGN.jpg
Jessooca said:
I got this issue fixed the other day by making my own JIG and now I am working on a new problem, in a whole new thread. LOL I will get this phone working again! muahahahahahahahahahaha
Currenty I have NO data not sure why but I can't update profile/prl as I have a big fat O with a diagonal line through it, the ever so infamous "NO" symbol. I have no problems with wifi but alas NO data.
Any clues if there is a way to restore say "efs" or something to that effect to give me data back?
Click to expand...
Click to collapse
What Rom and modem combination are you running? Have you ran the activation reset now that you're up and running? (##72786#), without the parentheses of course .
Sent from my SPH-L710 using Tapatalk

Categories

Resources