Stock-Multi Window - Galaxy Tab 3 Q&A, Help & Troubleshooting

I assume that the stock rom has the multi window option?
Sent from my SCH-I605 using xda app-developers app

Tab 3's don't have multi window afaik, if it does than i have no idea where to find it

I dont know why it doesnt have it, it makes no sense, what kind of requirements does the multiwindow need? Ram? 1gig is enough, ask the s3, Cpu? Cmon
The tab 3, specially the 10.1 should have this
Sent from my GT-I9500 using Tapatalk 4

negrobembon said:
I dont know why it doesnt have it, it makes no sense, what kind of requirements does the multiwindow need? Ram? 1gig is enough, ask the s3, Cpu? Cmon
The tab 3, specially the 10.1 should have this
Sent from my GT-I9500 using Tapatalk 4
Click to expand...
Click to collapse
the 8.0 has multi window.....

zedaycee said:
the 8.0 has multi window.....
Click to expand...
Click to collapse
How?
Sent from my GT-P5210 using xda app-developers app

confyzone said:
How?
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
Select Multi-window from the pull down tiles.

confyzone said:
How?
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
Its on the notifications drop down.

Not on 10.1
Sent from my GT-P5210 using xda app-developers app

confyzone said:
Not on 10.1
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
That's a bit poor....
Then again the 8.0 is pretty similar to the note 8.0 minus the stylus and the note 8.0 does have multi-window.... not sure about the note 10 though...

Multiwindow mod tester needed!
Brennon19968 said:
I assume that the stock rom has the multi window option?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
confyzone said:
Not on 10.1
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
negrobembon said:
I dont know why it doesnt have it, it makes no sense, what kind of requirements does the multiwindow need? Ram? 1gig is enough, ask the s3, Cpu? Cmon
The tab 3, specially the 10.1 should have this
Sent from my GT-I9500 using Tapatalk 4
Click to expand...
Click to collapse
just wanted to drop in & introduce myself...i'm the developer of the multiwindow mod for several other tablets such as the tab plus, tab 2, 7.7, and note 8 (5-layout version). I think its possible that we could get multiwindow working on the the tab 3 but i'm going to need a dedicated tester (for both the 7" and 10" version) who knows how to manually install files & set permissions (which means u guys MIGHT need TWRP or AROMA) although the packages below SHOULD be ok to flash. Also...u will need to be rooted & deodexed as well and don't forget to indicate which device & variant u are using (7 or 10 inch...wifi or 3g model number)
here goes a quick test zip for the 7" ONLY...u MAY have to extract the files and install manually due to flashable zip issues i've been having
https://docs.google.com/file/d/0B7yxeu9x48ILbGtJWThoUjdLQVE/edit?usp=sharing
^T21x MULTIWINDOW TEST 1
here goes 2 test zips for the 10" ONLY...u MAY have to extract the files and install manually due to flashable zip issues i've been having
View attachment P52xxMultiWindowModTest1.zip
View attachment P52xxMultiWindowModTest2.zip
^P52xx MULTIWINDOW TEST
View attachment SystemUI.apk
^5-LAYOUT SYSTEMUI (this is for the 7" owners ONLY....install this file BY ITSELF to see if your tab will still boot)
DISCLAIMER: I'M NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE...BE SURE TO BACKUP BEFORE U BEGIN AS ALWAYS!

THEDEVIOUS1 said:
just wanted to drop in & introduce myself...i'm the developer of the multiwindow mod for several other tablets such as the tab plus, tab 2, 7.7, and note 8 (5-layout version). I think its possible that we could get multiwindow working on the the tab 3 but i'm going to need a dedicated tester (for both the 7" and 10" version) who knows how to manually install files & set permissions (which means u guys MIGHT need TWRP or AROMA) although the files below SHOULD be ok to flash. Also...u will need to be rooted & deodexed as well and don't forget to indicate which device & variant u are using (7 or 10 inch...wifi or 3g model number)
here goes a quick test zip for the 7" ONLY...u MAY have to extract the files and install manually due to flashable zip issues i've been having
https://docs.google.com/file/d/0B7yxeu9x48ILbGtJWThoUjdLQVE/edit?usp=sharing
^T21x MULTIWINDOW TEST 1
here goes 2 test zips for the 10" ONLY...u MAY have to extract the files and install manually due to flashable zip issues i've been having
View attachment 2249684
View attachment 2249685
^P52xx MULTIWINDOW TEST
DISCLAIMER: I'M NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE...BE SURE TO BACKUP BEFORE U BEGIN AS ALWAYS!
Click to expand...
Click to collapse
I'll give this a go this evening when i get home from work (have my tablet in hand) & report back..
may i ask the reasoning for including an empty '/data/app/ directory?

SOHKis said:
I'll give this a go this evening when i get home from work (have my tablet in hand) & report back..
may i ask the reasoning for including an empty '/data/app/ directory?
Click to expand...
Click to collapse
I'm guessing he probably has a zip template that he uses frequently and this particular mod doesn't require anyything in the data folder. I do the same thing.

THEDEVIOUS1 said:
just wanted to drop in & introduce myself...i'm the developer of the multiwindow mod for several other tablets such as the tab plus, tab 2, 7.7, and note 8 (5-layout version). I think its possible that we could get multiwindow working on the the tab 3 but i'm going to need a dedicated tester (for both the 7" and 10" version) who knows how to manually install files & set permissions (which means u guys MIGHT need TWRP or AROMA) although the packages below SHOULD be ok to flash. Also...u will need to be rooted & deodexed as well and don't forget to indicate which device & variant u are using (7 or 10 inch...wifi or 3g model number)
here goes a quick test zip for the 7" ONLY...u MAY have to extract the files and install manually due to flashable zip issues i've been having
https://docs.google.com/file/d/0B7yxeu9x48ILbGtJWThoUjdLQVE/edit?usp=sharing
^T21x MULTIWINDOW TEST 1
here goes 2 test zips for the 10" ONLY...u MAY have to extract the files and install manually due to flashable zip issues i've been having
View attachment 2249684
View attachment 2249685
^P52xx MULTIWINDOW TEST
View attachment 2251451
^5-LAYOUT SYSTEMUI (this is for the 7" owners ONLY....install this file BY ITSELF to see if your tab will still boot)
DISCLAIMER: I'M NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE...BE SURE TO BACKUP BEFORE U BEGIN AS ALWAYS!
Click to expand...
Click to collapse
Tried installing both your files for Tab3 10.1 3G.
Both failed with error code 255. Not sure if it's a problem with my permissions or root. but Tab is rooted with bindroid and root zip. (CWM)
I will try and install manually - but haven't done it before. so i'll have to read up on it first
EDIT - Nope. tried installing normally through recovery and manually - both failed. I have all the settings set to unknown sources etc.
Let me know what you would like me to try and I will help as much as I can

nasaprinsloo said:
Tried installing both your files for Tab3 10.1 3G.
Both failed with error code 255. Not sure if it's a problem with my permissions or root. but Tab is rooted with bindroid and root zip. (CWM)
I will try and install manually - but haven't done it before. so i'll have to read up on it first
EDIT - Nope. tried installing normally through recovery and manually - both failed. I have all the settings set to unknown sources etc.
Let me know what you would like me to try and I will help as much as I can
Click to expand...
Click to collapse
You may have root, but your not on a deodexed rom... so this would fail.
Also, the recovery i made is a quick solution for us to get root.
It is not made from the source-code it is suppose to be, but givvin us root for now.
Thats why it fails on some permissions while flashing zips.... I/we are working on it...
For now there can not be tested on 10.1 gtab3 devices

ODEX TEST
nasaprinsloo said:
Tried installing both your files for Tab3 10.1 3G.
Both failed with error code 255. Not sure if it's a problem with my permissions or root. but Tab is rooted with bindroid and root zip. (CWM)
I will try and install manually - but haven't done it before. so i'll have to read up on it first
EDIT - Nope. tried installing normally through recovery and manually - both failed. I have all the settings set to unknown sources etc.
Let me know what you would like me to try and I will help as much as I can
Click to expand...
Click to collapse
i actually did forget one small thing...when u reboot u will need to uncheck then recheck multiwindow in settings/display to get the bar to appear
as far the major problem which is u not being deodexed...try the files in the new zip below
DutchDanny said:
You may have root, but your not on a deodexed rom... so this would fail.
Also, the recovery i made is a quick solution for us to get root.
It is not made from the source-code it is suppose to be, but givvin us root for now.
Thats why it fails on some permissions while flashing zips.... I/we are working on it...
For now there can not be tested on 10.1 gtab3 devices
Click to expand...
Click to collapse
all that we need are the .odex files and original jar/apks correct...if so i have attached another zip below that will also still need to be installed manually apparently
link removed

Test1,2 ...Not work on P5200 (JB 4.2.2, Rooted)

dedichthui said:
Test1,2 ...Not work on P5200 (JB 4.2.2, Rooted)
Click to expand...
Click to collapse
exactly what happenned?
did u manually place the files in the there proper locations and remember to set permissions to "rw-r--r--" (there are a total of 10 files u would have to do this on)...if u did in fact set this correctly what were the results? Did u read the post above and remember to uncheck then recheck the multiwindow option in "settings-display" (probably the problem) if so at WORSE case u should have received a flashbar force close or some sort of other sign

Thanks, THEDEVIOUS1, for taking a stab at this!
I tried the deodexed mod on Infamous. I tried copying the files to system using Root Explorer, but it went into a bootloop before all of them could be copied. I then restored a backup of Infamous and tried flashing it. There were no multi-window options to be found under any of the display options, unfortunately.
Sent from my SM-T210R using Tapatalk 4

perknite said:
Thanks, THEDEVIOUS1, for taking a stab at this!
I tried the deodexed mod on Infamous. I tried copying the files to system using Root Explorer, but it went into a bootloop before all of them could be copied. I then restored a backup of Infamous and tried flashing it. There were no multi-window options to be found under any of the display options, unfortunately.
Sent from my SM-T210R using Tapatalk 4
Click to expand...
Click to collapse
i assumme you're using the 7 inch version which means u will NOT be able to install this manually through root explorer and will need to use the file manager provided in TWRP since the zip contains major system files which need to be replaced...flashing may not work at all so if u would like real results i would attempt the method i just suggested (proof of this is the fact that u should be able to use root explorer to copy ONLY the permissions files and that should be enough t to make the menu appear which means the zip is most likely broken...i have had this problem on my setup for a while but i havent been able to track it down)

THEDEVIOUS1 said:
i assumme you're using the 7 inch version which means u will NOT be able to install this manually through root explorer and will need to use the file manager provided in TWRP since the zip contains major system files which need to be replaced...flashing may not work at all so if u would like real results i would attempt the method i just suggested (proof of this is the fact that u should be able to use root explorer to copy ONLY the permissions files and that should be enough t to make the menu appear which means the zip is most likely broken...i have had this problem on my setup for a while but i havent been able to track it down)
Click to expand...
Click to collapse
Thanks for the quick reply.
I followed your suggestion (copying fikes using twrp file manager), but there is still no sign of multi-window in any of the display settings. I may be doing something wrong. I did change permissions using twrp file manager, but I did it before copying to the system folder. Let me know if it should be dine another way.
Sent from my SCH-I605 using Tapatalk 4

Related

[Q] Softkeys and status bar disappeared

hello i rooted my phone today and downloaded metamorph and busybox and installed some themes 2 worked just fine but when i tried to install the htc onex thats when my soft keys and statubar dissapered please help how can i fix this
android4life21 said:
hello i rooted my phone today and downloaded metamorph and busybox and installed some themes 2 worked just fine but when i tried to install the htc onex thats when my soft keys and statubar dissapered please help how can i fix this
Click to expand...
Click to collapse
Reflash your system partition.
Petrovski80 said:
Reflash your system partition.
Click to expand...
Click to collapse
and how would i do that?
Reflash the .zip file of your ROM in recovery
Sent from my Galaxy Nexus using xda premium
Godra said:
Reflash the .zip file of your ROM in recovery
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
im not sure i have a rom installed and if i do where would i find it
If you just rooted, you don't have a custom ROM but simply Google's stock images. What you need to do is read this guide and only flash system.img instead of all of them. Be sure to use the correct version!
Inject
SYSTEMUI.apk
In your system/app
Sent from my phone using xda app-developers app
sembre said:
Inject
SYSTEMUI.apk
In your system/app
Sent from my phone using xda app-developers app
Click to expand...
Click to collapse
can any of this be done from the galaxy nexus toolkit?
android4life21 said:
can any of this be done from the galaxy nexus toolkit?
Click to expand...
Click to collapse
Assuming the SYSTEMUI.apk is under the same location of ADB, use command below:
adb push SYSTEMUI.apk /system/app/
android4life21 said:
can any of this be done from the galaxy nexus toolkit?
Click to expand...
Click to collapse
Once this is solved you should learn to adb/fastboot. If you knew how you wouldn't have any issues solving problems like this yourself. Also none of the potential for user error the toolkit has.
063_XOBX said:
Once this is solved you should learn to adb/fastboot. If you knew how you wouldn't have any issues solving problems like this yourself. Also none of the potential for user error the toolkit has.
Click to expand...
Click to collapse
Agreed. The toolkit helped me out of a few "oh dang" moments when I wasn't particularly familiar with THIS phone, but knowing things about adb, Android mounts/filesystem, etc. has helped me out far more.
You need to learn about adb push, install, uninstall, get-state, and reboot commands, at least. You should also learn a little about some of the more important mount points (/system, /data, /cache) and what kind of files get stored there. For example, since the GNex doesn't have an actual SD card, you NEVER wipe/format /system without a darned good reason.
Hope you get the issue fixed. It does seem like going back to a stock ROM, or reverting to a ROM (or nandroid backup; you made one, right?) that worked correctly will clear it up, easy peasy.

Bootanimation- Android Andy pees on Apple- My favorite

Here is a resized version of the android pee on Apple bootanimation that I found on the Rom toolbox but for some reason wouldn't display on my note 2 even if I resized within the application.To me it's much better lookin than the fat tinkle peeling droid that I found here and its resized correctly. Credit goes to the original animation author which I have no clue whom that may be.
Here's the sample I uploaded to YouTube for you guys
https://www.youtube.com/watch?v=vphIEzGJuno&feature=youtube_gdata_player
are u rooted? if yes... then do these steps verbatim to change your boot animation on your note 2.
STEP 1: download THIS file and do NOT extract it or anything (use your computer or phone... its like 100mb so i reckon you best be on WiFey to be safer from a broken dload)
STEP 2:
if using your computer to download , plug ur phone in to mount usb and moved the file to your sd card or your internal memory [ EX:Computer\SPH-L900\Phone or Computer\SPH-L900\Card ] (OR use a program like Android Commander to make things a little easier and put the file directly into the /system/media directory of your phone.... hint:the 'system' folder is located in the PARENT FOLDER of your SDCARD directory .... aka your ROOT directory)
if downloaded using your phone browser.... just use any root file manager (eg:I use ROM Toolbox Pro's Root file Browser,but there are dozens of other app like root explorer, ES File Explorer File Manager, ASTRO file Manager i think works too if u have the pro version but dont hold me to it) and use the Move to or the Copy To feature within any of those apps to move the file manually to your /system/media/ directory. You can just overwrite the one that is already there or just add a .bak or .EAD or .GTH to the end of the file name of the file you wanna backup thats already there BEFORE moving the new Android Peeing animation you downloaded in the first step.
IMPORTANT- DO NOT RENAME OR EXTRACT THE ZIP FILE YOU DOWNLOADED IN STEP 1... the file MUST BE NAMED bootanimation.zip
STEP 3- Using your root file managing joint appy proggy thingys Permissions editor (normally u just long click the file you wanna set permissions for and the edit permissions option will pop up somewhere) set the pemissions (or verify them) to this...
OWNER- READ WRITE
GROUP- READ
OTHERS- READ
or another way of saying this is RW-R--R--
Step 4 - SAVE or ACCEPT changes....
Step 5 - Reboot to make sure bootanimation is changed
Step 6 - Reboot again in a busy elevator or place where some iPhags can see over your shoulder.... and grin maliciously. :angel:
Step 7- :highfive: click the thanks button if u want or pm me if u have some bitcoins u managed to accumulate somehow and wanna donate em to me
BOSS!!!
Awesome
Sent from my SPH-L900 using Tapatalk 2
The bomb and Thanks:good:
glad you liked it...at least a few people got some benefit
rickadee04 said:
The bomb and Thanks:good:
Click to expand...
Click to collapse
:good::highfive:
This is cool thanks.. I love anything that pisses on apple..lol.
Sent from the 3rd Galaxy with Jelly Beans...
When I copy this file over using es file explorer with root permissions and name the old one.bak I only get a black screen that has the android logo for a few seconds. Is there some ng I missee
You sure you spelled it right with all lower case letters?
Sent from my SPH-L900 using xda premium
i noticed the file was already labeled "bootanimation.zip" so i copied it as it as renaming the original. the only thing about my phone is that im running MacksROM All Star 2.5 rather than stock but i dont think that would make any difference.
ridleyj329 said:
i noticed the file was already labeled "bootanimation.zip" so i copied it as it as renaming the original. the only thing about my phone is that im running MacksROM All Star 2.5 rather than stock but i dont think that would make any difference.
Click to expand...
Click to collapse
hmm.... try redownloading the file and replace the file u just tried with the one u just downloaded and then rename as necessary. i dont think ma7 changed the location of where it fetches the boot ani.... but im still running LjC. but running macks rom 5.0 which is basically the same rom as the allstar rom you are using minus without the Ma7 goodies. but anyway try what i mentioned real quick and see if maybe it was just a corrupt or incomplete download or transfer to your device if u used the computer. meantime ill see whats involved in making it a flashable zip or if my feeble mind cant wrap itself around how that works... maybe someone here will post a flashable version for ya. :fingers-crossed:
sheetmetalninja said:
hmm.... try redownloading the file and replace the file u just tried with the one u just downloaded and then rename as necessary. i dont think ma7 changed the location of where it fetches the boot ani.... but im still running LjC. but running macks rom 5.0 which is basically the same rom as the allstar rom you are using minus without the Ma7 goodies. but anyway try what i mentioned real quick and see if maybe it was just a corrupt or incomplete download or transfer to your device if u used the computer. meantime ill see whats involved in making it a flashable zip or if my feeble mind cant wrap itself around how that works... maybe someone here will post a flashable version for ya. :fingers-crossed:
Click to expand...
Click to collapse
Im on macs 2.5 and it is indeed and the system/media...I just copied over and set permissions. ...love it!
Sent from my SPH-L900 using Tapatalk 2
neopolotin75 said:
Im on macs 2.5 and it is indeed and the system/media...I just copied over and set permissions. ...love it!
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
making a flashable zip was alot easier than i thought it was gonna be... already tested it.
https://www.box.com/s/jdu2php8qmq3m36ig74g
flash with cwm or twrp
I had the same problem I had to go to property's and change it to rw-r-r then save then it should work
rickadee04 said:
I had the same problem I had to go to property's and change it to rw-r-r then save then it should work
Click to expand...
Click to collapse
THANKS A MILLION!!!!! I tried redownloading like the OP said and I even tried the flashable zip and nothing. but this worked first try!!!
ridleyj329 said:
THANKS A MILLION!!!!! I tried redownloading like the OP said and I even tried the flashable zip and nothing. but this worked first try!!!
Click to expand...
Click to collapse
Weird. I didn't have to change any of the permissions...I even checked before rebooting that the permissions were the same. And they were already. Glad you got it sorted out.
Dude thank you for posting this I love it! Haha so is it confirmed to be working on MA7? I can't wait to show all my crapple loving friends! =D
Sent from my SPH-L900 using xda app-developers app
metal666fukhead said:
Dude thank you for posting this I love it! Haha so is it confirmed to be working on MA7? I can't wait to show all my crapple loving friends! =D
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Works for me on stock MA7 rooted. HOWEVER...the instructions in OP didnt work....these instructions did:
http://forum.xda-developers.com/showthread.php?t=1971828
Sent from my SPH-L900 using xda premium
anti-up said:
Works for me on stock MA7 rooted. HOWEVER...the instructions in OP didnt work....these instructions did:
http://forum.xda-developers.com/showthread.php?t=1971828
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Sweet man thanks I'm going to give it a try sometime today =D
Sent from my SPH-L900 using xda app-developers app
Very cool!
Sent from my SPH-L900 using xda premium
---------- Post added at 02:02 PM ---------- Previous post was at 01:54 PM ----------
I flashed the zip and I got the normal boot
Sent from my SPH-L900 using xda premium
Can we get a new file link? Or will some one please
Upload. Band with had been exceeded
Sent from my SPH-L900 using xda app-developers app

[HOWTO] Root Android 4.3 on samsung galaxy nexus

This rooting technique Finally worked you will need three files
1) SDK TOOLS from
2) recovery.img from
3)MRKREHANROOT from
you should have unlock boot loaders USB drivers installed and should be on android 4.3
copy mrkrehanrehanroot3.1.zip in sdcard
be in fastboot mode ie switch off your device and hold both volume up and down and power button together and keep your device connected to PC
Extract the sdktools and place the revovery.img in that folder
then with one finger on shift key right click in an empty space in the folder and select open command window here
then type fastboot flash recovery recovery.img
it will flash recovery to your device
in recovery no need wipe anything install the zip mrkrehanroot3.1.zip
and reboot
download any app that requires root access and check for example root explorer
it should ask root acess
in this way you have rooted your device
Keep the thanks rolling and follow me on
Is that real android 4.3?
Sent from my Galaxy Nexus using Tapatalk 2
imam.krismanto said:
Is that real android 4.3?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
(Y)
imam.krismanto said:
Is that real android 4.3?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
sure from google :angel:
Much Appreciate
I installed the factory image wasn't able to get it to root with mskip'stool soo I gave this a try worked like a champ -Thank you kind sir :laugh:
Not to diss this method of root, but Chainfire's root method works perfectly fine.
https://plus.google.com/113517319477420052449/posts/WqS2E9kkN1L
X_N_ said:
Not to diss this method of root, but Chainfire's root method works perfectly fine.
https://plus.google.com/113517319477420052449/posts/WqS2E9kkN1L
Click to expand...
Click to collapse
I use that method, cannot restore any app with TB or install Busybox, for some reason it's root but not completely.
This thread shouldn't be in dev section, and there were bunch of root method threads/posts that could be easily found.
http://download.chainfire.eu/340/SuperSU/SuperSU-JWR66N-S005-130625-1.41.zip
try this, somebody tried and it works!
_Drifter_ said:
I use that method, cannot restore any app with TB or install Busybox, for some reason it's root but not completely.
Click to expand...
Click to collapse
Read description:
Titanium Backup is an example of such an app. It may incorrectly detect the path to your internal storage for backups, and thus crash on backup/restore. You can fix this by going into preferences and selecting a folder under /storage/emulated/legacy as backup/restore path, not under /storage/emulated/0.
Click to expand...
Click to collapse
msip said:
Read description:
Click to expand...
Click to collapse
No busybox from the apps don't install correctly with chainfire's root. I have the same problem.
Sent from my Galaxy Nexus using xda premium
finally did it
Mohhamad Rehan said:
finally did it
Click to expand...
Click to collapse
Is it posted?
Sent from my Galaxy Nexus using xda premium
checck the thread out buddy
prowede said:
http://download.chainfire.eu/340/SuperSU/SuperSU-JWR66N-S005-130625-1.41.zip
try this, somebody tried and it works!
Click to expand...
Click to collapse
"Please do not mirror this download, do not repost the file elsewhere. Link to this post on G+, not the download."
https://plus.google.com/+Chainfire/posts/WqS2E9kkN1L
ALUOp said:
"Please do not mirror this download, do not repost the file elsewhere. Link to this post on G+, not the download."
https://plus.google.com/+Chainfire/posts/WqS2E9kkN1L
Click to expand...
Click to collapse
OK bro if you say I did thank to u but if u had it you should have shared it first and should have had a guide of it and u should have shared I did it because I spent my whole night flashing recovery and finding proper ways to root it finally did it when I found the file so I flashed the recovery the mini SDK tool they are mine but I did not know who to thank for the root so I just mirrored it but I put up a guide here so its not my fault I am sorry that I hurt the sentiments
Sent from my Galaxy Nexus using xda premium
imam.krismanto said:
Is that real android 4.3?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes it is
Sent from my Galaxy Nexus using xda premium
ALUOp said:
"Please do not mirror this download, do not repost the file elsewhere. Link to this post on G+, not the download."
https://plus.google.com/+Chainfire/posts/WqS2E9kkN1L
Click to expand...
Click to collapse
and as u say buddy its mentions its for S4 and i was brave enough to check it out by editing some scripts and lines and flash it on my devices so i did not copy it fully but i did it on my own risk to check it on my devices and name it after me so if u have any problem with that so be it but i did it i am not chainfire but the day is not so long when i will be like him one day so kindly check it out
Mohhamad Rehan said:
and as u say buddy its mentions its for S4 and i was brave enough to check it out by editing some scripts and lines and flash it on my devices so i did not copy it fully but i did it on my own risk to check it on my devices and name it after me so if u have any problem with that so be it but i did it i am not chainfire but the day is not so long when i will be like him one day so kindly check it out
Click to expand...
Click to collapse
dude relaxy, if you get worked up everytime someone says that there is another way of doing what you are saying you wont get very far cuz honestly there are always multiple ways to stuff... however i do agree with you chainfire clearly said on g+ that the root method is specifically for the s4 leak.. anyway its upto the users they can either use your method or chainfires.. i will try your method once i flash 4.3 :good:
Khizar said:
dude relaxy, if you get worked up everytime someone says that there is another way of doing what you are saying you wont get very far cuz honestly there are always multiple ways to stuff... however i do agree with you chainfire clearly said on g+ that the root method is specifically for the s4 leak.. anyway its upto the users they can either use your method or chainfires.. i will try your method once i flash 4.3 :good:
Click to expand...
Click to collapse
Thank buddy it will be grateful and one more thing u can use the mini SDK tool to flash 4.3 too
Sent from my Galaxy Nexus using xda premium

Change Navigation Bar size to 24dpi (stock-rooted ROM)

I love my new Nexus but that horrible navigation bar kept bugging me. I don't hate the bar but the size was just aweful. Since this is my first Android device, I wanted to keep it stock. I did try a couple of ROMs but went back to stock. I kept trying to figure out how to reduce the size of the navigation bar. I tried a couple of programs. They were buggy. So, finally, shinta86 pointed me to http://chromloop.com/2013/07/how-to...on-bar-in-cyanogenmodcm10-1-on-nexus-4-guide/ that had instructions on how to decompile, change, and recompile framework-res.apk file. I gave it a go and bam, my navigation bar is smaller now. I chose to go with 24dpi. In case you would like it, I have included a link to framework-res.apk.zip file. Your device has to be rooted. You will have to replace framework-res.apk file in /system/framework with the one that you download from my link.
As with other things posted on this forum, please proceed with warning. I am not responsible for any damages to your device.
Proof of the labor:
Link to the files:
24dpi
https://www.dropbox.com/s/d9gqu5zvtf72e4w/framework-res.apk.zip
32dpi (better for Tablet UI mod)
https://www.dropbox.com/s/kombtzppggxcbkw/framework-res-32dpi.apk.zip
Nice!
rumatt said:
Nice!
Click to expand...
Click to collapse
Thanks! My next goal is to see if I can move it to the side or, better yet, enable Tablet UI on stock ROM.
32 DPI for minimus ROM
Hey thanks a lot for this. although I couldn't use the file you posted, ROM not stock, the tutorial was surely very helpful!
So everyone, if you are using Minimus ROM, use this framework to get 32 DPI navbar.
https://docs.google.com/file/d/0Bzc3DKZX3_4rdU5VV1FfTEZlUjQ/edit?usp=sharing
Drive has made this file stupid, just download it and rename to framework-res.apk and push to relevant path
Great mod, any chance you could do 32 DPI for stock
cyrusir said:
Great mod, any chance you could do 32 DPI for stock
Click to expand...
Click to collapse
Sure...I will try and post it here soon.
cyrusir said:
Great mod, any chance you could do 32 DPI for stock
Click to expand...
Click to collapse
Here you go. Let me know how it works. https://www.dropbox.com/s/kombtzppggxcbkw/framework-res-32dpi.apk.zip
Excellent mate, thank you
sherpa said:
Thanks! My next goal is to see if I can move it to the side or, better yet, enable Tablet UI on stock ROM.
Click to expand...
Click to collapse
Looking forward to this.
cx1 said:
Looking forward to this.
Click to expand...
Click to collapse
Someone got to it before I did. http://forum.xda-developers.com/showthread.php?t=2418867
I can't seem to get your mod to work with this ---> http://forum.xda-developers.com/showthread.php?t=2418867
Nice, may use it in the future, ATM for me, the black bar seems a very good size, much better than the first n7 bar
Sent from my Nexus 7 using xda app-developers app
cx1 said:
I can't seem to get your mod to work with this ---> http://forum.xda-developers.com/showthread.php?t=2418867
Click to expand...
Click to collapse
Try the 32dpi mod in post #7. 24dpi will be too small for Tablet UI. Also, apply the Tablet UI mod first and then this one.
sherpa said:
Try the 32dpi mod in post #7. 24dpi will be too small for Tablet UI. Also, apply the Tablet UI mod first and then this one.
Click to expand...
Click to collapse
That's the one I am trying. I copy the file over and reboot, but nothing changes.
cx1 said:
That's the one I am trying. I copy the file over and reboot, but nothing changes.
Click to expand...
Click to collapse
Are you sure you are copying it over? When you do, the device will reboot by itself. What file explorer are you using? You may have to enable R/W as root.
sherpa said:
Are you sure you are copying it over? When you do, the device will reboot by itself. What file explorer are you using? You may have to enable R/W as root.
Click to expand...
Click to collapse
I have the same problem, i tried pushing the files using one of the Toolkits and 2 file exploring apps, and couldn't get it to work.
In fact, i got a bootloop when i tried to push the file with the file explorers. I already checked the SuperSu status, made sure the file has the same permisions the original apk has, but nothing works.
I am using a stock deodexed JSS15Q rom. If you are not too busy, could you show us how to do it? Thanks.
JohnnySJ said:
I have the same problem, i tried pushing the files using one of the Toolkits and 2 file exploring apps, and couldn't get it to work.
In fact, i got a bootloop when i tried to push the file with the file explorers. I already checked the SuperSu status, made sure the file has the same permisions the original apk has, but nothing works.
I am using a stock deodexed JSS15Q rom. If you are not too busy, could you show us how to do it? Thanks.
Click to expand...
Click to collapse
The file I posted is for odexed ROM. I will try and post some instructions soon.
Using Root Explorer go to your edited framework-res.apk on your SD long press it and select copy then navigate back to system/framework and "paste" your edited framework-res. It will ask you if you would like to "overwrite" the current framework-res, select yes. After that flo will reboot.
If you don't have Root Explorer, it is a must for Root Users and you can find it in the Play Store.
Also, remember to backup your original framework-res.apk.
Or... Go LMT, which solves the whole problem and screen space!
Sent from my Nexus 7 using Tapatalk 4
sherpa said:
The file I posted is for odexed ROM. I will try and post some instructions soon.
Click to expand...
Click to collapse
Any luck with the deodexed version? I would like to try this so bad, i am considering changing to an odexed version of the rom. But correct me if
I'm wrong; with an odexed rom i would not be able to install other mods
like Dsp Manager or Extended Power Menu. Right?

[ROMs][PORTAL][TUT][NOOB FRIENDLY] Alcatel OT Idol X 6040X/ 6040A

This is a noob friendly "portal" for the Idol X single sim edition. Most of what you find here should technically work for the dual sim phone, but I can not say for sure. You will be able to find ROMs, tutorials and other links with friendly support from other Alcatel users to help you customize this stubborn MediaTek device. To remind you, this thread will focus on the 6040A / X and NOT the 6040 D.
Before you read any further, understand that the ROMs, tools, and other downloadable content you find in this thread are not mine, therefore I can not be held accountable for what happens to your phone if you choose to install any of them. I am / we are simply relaying, and elaborating what has been learned about this phone to try and better support for this model. If you mess your phone up, remember that it was your choice to modify your phone. If you fail miserably, download the One Touch Upgrade tool from Alcatel's support website and it should return you to factory condition.
__________________________________________________________________________________
This phone is complicated for customization. I'm making this thread to gather as much information as we can to make things work for it as a collective. If you have any success stories, please post them here with how you did it please.
Before you can do anything to your phone, you're going to want to install vroot/iroot to root your phone. Below for instructions.
______________________________________________________________________
BEFORE YOU BEGIN MAKE BACK UPS and SAVE A FEW COPIES OF YOUR "modem.img" FILE. YOU WILL HAVE TO RENAME THE FILE TO "modem_1_3g_n.img" AND REPLACE THE CORRESPONDING FILE IN THE NEW ROM TO MAKE YOUR MOBILE NETWORK WORK WITH YOUR SINGLE SIM PHONE. ALSO REMEMBER TO CHANGE THE PERMISSION FOR SAID FILE TO 644.
"modem.img" / "modem_1_3g_n.img" can be found under /system/etc/firmware/
IF YOU ARE HAVING A HARD TIME FINDING YOUR MODEM IMG FILE SEE POST NUMBER 10 ON THIS PAGE FOR A COPY OF MINE. HOPEFULLY IT WORKS
__________________________________________________________________________
MUST READ GUIDES -
How to Root - HERE
How to flash without using SPFlashTool or FlashToolMod - Recovery Flash Guide
Flash Tool tutorial - for flashing without recovery.
SPFT - many versions HERE
---------------------------
Recoveries, Flash tools, etc
Phil's touch recovery - favorite.
Brka said:
CWM Recovery - download HERE ClockworkMod recovery (CWM) 6.0.1.2 (Custpack backup)
Carliv Touch Recovery 6.0.4.4 + AROMA Filemanager - HERE
If after custom / stock phone locked - use THIS (for cwm/twrp)
Custom recovery should be flashed with SPFT.
SPFT - many versions HERE
Click to expand...
Click to collapse
--------------------------------------
ROMs-
Original Canadian 6040A ROM from Brka at GSM. I have not tested this, but source (Brka) is well versed with android. That being said, Use at own risk
TCL S950 ROM 4.4.2 Kit Kat Follow instructions in link (I have this working 100% for 6040A)
AOSP 4.4 and S950 Galaxy S4 User Interface ROM's. Follow instructions in link (I was unable to solve Mobile network issue for both of these. Also the AOSP ROM is designed for internal SD cards only. More experienced users are required.
SlimCat Custom ROM 4.4.2 I have this up and running for 6040A. Simply Flash via recovery and modify "modem.img" file to find mobile network.
If you plan on flashing the TCL S950 KK ROM, I can help you get the network working. Feel free to ask!
And if anyone has been able to Flash the ASOP KK ROM 1.3 for the 6040A and got the mobile network working and has been able to mod it for external SD card support, please let me know how.
SuperDroid519 said:
If you plan of flashing the TCL S950 KK ROM, I can help you get the network working. Feel free to ask!
And if anyone has been able to Flash the ASOP KK ROM 1.3 for the 6040A and got the mobile network working and has been able to mod it for external SD card support, please let me know how.
Click to expand...
Click to collapse
I'll play around with the modem files you pointed me to. I'm going to try getting them working on the Slimkat rom that is on 4PDA. If I ever do, I'll post here where to put the necessary files.
Back up your original file and play around with it. I've read two methods on here for this and what I did would make 3 methods. My way was a fluke I'm pretty sure but it had worked every time I have had to reflash original ROM. Try other two ways first
Sent from my TCL S950 using XDA Free mobile app
SuperDroid519 said:
Back up your original file and play around with it. I've read two methods on here for this and what I did would make 3 methods. My way was a fluke I'm pretty sure but it had worked every time I have had to reflash original ROM. Try other two ways first
Sent from my TCL S950 using XDA Free mobile app
Click to expand...
Click to collapse
I can't seem to pull mine from my nandroid backup right now for some reason. It keeps coming out at only 25 bytes instead of approximately 5MB. I'll see if I can find one for Bell/Virgin Mobile Canada.
Going to share my desktop. Two variants.
Sent from my TCL S950 using XDA Free mobile app
@SuperDroid519, did you ever try slimkat? That's what I'm trying to get working. Nothing yet though.
No I haven't but I'm free all day. Send link. Does it support external SD cards? The AOSP one didn't for me
Sent from my TCL S950 using XDA Free mobile app
Team Fail said:
I can't seem to pull mine from my nandroid backup right now for some reason. It keeps coming out at only 25 bytes instead of approximately 5MB. I'll see if I can find one for Bell/Virgin Mobile Canada.
Click to expand...
Click to collapse
I didn't see this. But I have a back up of mine if you want. I'm with bell.
SuperDroid519 said:
No I haven't but I'm free all day. Send link. Does it support external SD cards? The AOSP one didn't for me
Sent from my TCL S950 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, it does. I have all my music on my SD card and it reads it perfectly fine. I also find it a very smooth rom with almost no lag at all. You will probably want to install GB KK though, as it doesn't have all the customization options ROMs usually do.
SuperDroid519 said:
I didn't see this. But I have a back up of mine if you want. I'm with bell.
Click to expand...
Click to collapse
I'll give it a try. You mentioned three different installation methods. So far, I have copied my older one to /system/etc/firmware, and it hasn't worked. What are the other two?
And there's also placeing the modem.img file in the path "root/custpack/modem/" rename the file to modem_1_3g_n.img.
People say it's one or the other.
I had to rename them both in both locations for it to work for me.
Have the link for Slimkat?
SuperDroid519 said:
And there's also placeing the modem.img file in the path "root/custpack/modem/" rename the file to modem_1_3g_n.img.
People say it's one or the other.
I had to rename them both in both locations for it to work for me.
Have the link for Slimkat?
Click to expand...
Click to collapse
Here's a link.
Team Fail said:
Here's a link.
Click to expand...
Click to collapse
Thanks.
This a Flashtool ROM?
SuperDroid519 said:
Thanks.
This a Flashtool ROM?
Click to expand...
Click to collapse
Flash it in recovery.
As for using custpack, with this rom it's not an option, as there is no custpack directory. I tried making one for the phone to use, but it's erased on boot.
Team Fail said:
Flash it in recovery.
As for using custpack, with this rom it's not an option, as there is no custpack directory. I tried making one for the phone to use, but it's erased on boot.
Click to expand...
Click to collapse
Ok the very first time I got it working I had a modem.img and a modem_1_3g_n.img in the same folder. both with 644 permissions. Not exactly sure which one was renamed though. Honestly it was a fluke.
SuperDroid519 said:
Ok the very first time I got it working I had a modem.img and a modem_1_3g_n.img in the same folder. both with 644 permissions. Not exactly sure which one was renamed though. Honestly it was a fluke.
Click to expand...
Click to collapse
So right now, here's where I'm at: The SIM card is detected, and it can find mobile networks, as well as tell me my telephone number. When a call is placed, it tells me that "The mobile network is unavailable." The lockscreen also tells me either "Searching for new network" or "Emergency calls only". I'm going to try a few things, including playing with the available APNs and see if I can get a connection.
Team Fail said:
So right now, here's where I'm at: The SIM card is detected, and it can find mobile networks, as well as tell me my telephone number. When a call is placed, it tells me that "The mobile network is unavailable." The lockscreen also tells me either "Searching for new network" or "Emergency calls only". I'm going to try a few things, including playing with the available APNs and see if I can get a connection.
Click to expand...
Click to collapse
Yea bro try the double modem file thing and reboot. Don't forget to reboot after every file transfer either. Being .img files they have to boot.
SuperDroid519 said:
Yea bro try the double modem file thing and reboot. Don't forget to reboot after every file transfer either. Being .img files they have to boot.
Click to expand...
Click to collapse
Have you had luck with SlimCat yet?
Edit: No dice on the double modem thing.
No. I had dishes and house things to do. I'm going to back up and flash in about 15.
What app are you using to move the files around?
Sent from my TCL S950 using XDA Free mobile app
SuperDroid519 said:
@tEaMFNo. I had dishes and house things to do. I'm going to back up and flash in about 15.
What app are you using to move the files around?
Sent from my TCL S950 using XDA Free mobile app
Click to expand...
Click to collapse
Originally I was using Aroma File Manager from my recovery (Carliv Touch), but ES File Explorer also works. Both can set permissions on files.

Categories

Resources