Related
Koushik Dutta's Clockwork Recovery:
Attention: Some people experience problems when flashing through Rom Manager. Flashing again usually fixes the issue. Use method below for best results. If on pure stock, your recovery will be overwritten unless you delete your /system/etc/install-recovery.sh file.
To flash recovery for Nexus S 4G, download recovery 5.0.2.0 or recovery touch 5.8.0.2 and place it into your sdk tools folder. Reboot into bootloader and execute:
Code:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo4g.img
or if you prefer the touch version:
Code:
fastboot flash recovery recovery-clockwork-touch-5.8.0.2-crespo4g.img
If you'd like simpler and more organized menus see j_r0dd's mod.
rev 5.0.1.0 Fix android_ secure backup bug.
rev 5.0.2.0 Fix root loss. Correct message when choosing "no" when wiping dalvik.
Officiality
RSVP....
outstanding
Sent from my HP Touchpad using xda premium
Backups on 4.x going tto restore properly on 5.x?
Great work by the way.
Sent from my Nexus S 4G using XDA App
...or just go into the ROM Manager app and click on "Flash Clockworkmod Recovery", your version will update to 5 automatically.
Sent from my Nexus S 4G using xda premium
Also there's a app in the app section that flashes img files quicker than you can blink.
Flash_image by gui
Sent from my HP touchpad using xda premium
jakkz said:
...or just go into the ROM Manager app and click on "Flash Clockworkmod Recovery", your version will update to 5 automatically.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
I had some issues doing it through rom manager. It was a no go so I flashed through bootloader.
I haven't checked if old backups are compatible yet. Anyone care to try and post?
Sent from my Nexus S 4G using XDA App
Every time I click on the update from inside ROM Manager, something terrible happens. I used think it was because I clicked on the link for the other Nexus S, but I was super duper careful this time.
If I try to reboot into recovery without being attached to my PC after flashing a new recovery in ROM Manager, I get stuck in fastboot. If I tell it to please boot me into recovery so can add a shiny new object to my Android, it tells me, "No ma'am." And, if im being honest, when I can't flash exciting new thingys on the go, existence begins to seem somewhat more futile. I'm sure you understand.
Might as well ask if there's a way I can fix it before I get home (in TEN HOURS) by fastbooting from a terminal or something. Okay, I'm begging.
p.s. I feel like I didn't get invited to most of Version 3 and all of Version 4.
Sent from my Nexus S 4G using xda premium
I had the same issue after using rom manager to flash 5. I just rebooted and tried flashing again from rom manager and it worked the second time
Sent from my Nexus S 4G using Tapatalk
jdkjgjjd said:
Might as well ask if there's a way I can fix it before I get home (in TEN HOURS) by fastbooting from a terminal or something. Okay, I'm begging.
p.s. I feel like I didn't get invited to most of Version 3 and all of Version 4.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Read the op. There is a reason why I gave instructions to flash through fastboot and not rom manager.
info[]box1 said:
Also there's a app in the app section that flashes img files quicker than you can blink.
Flash_image by gui
Sent from my HP touchpad using xda premium
Click to expand...
Click to collapse
This app worked great for me. Easy as 1,2,3
qbking77 said:
Backups on 4.x going tto restore properly on 5.x?
Great work by the way.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I can confirm they do work.
Trying to upgrade from 4.0.0.2 to 5.0.0.0, I keep getting stuck on "Waiting for device"..
If on windows...your driver is bad.
Try flash_image gui by Joeykrim
Well here is the thing, I can push/pull things from the device, I can adb shell to the device.. Everytime I try flash the recovery, I get the waiting for device
Well if on Windows, fastboot driver needs to be there along with adb.driver. Two different things
Didnt work through rom manager, had to do it via fastboot. I dig the new color!
so rom manager updated my cwm to this one and when i go to reboot into recovery it goes into bootloader and which i chose recovery nothing happens .... first line says FASTBOOT - NO RECOVERY OR BOOT IMG
For anybody having flashing/ pushing/ just getting the new cwm recovery use the flash_image by GUI app located in the ns4g app section. I can't stress it enough, but it your trying to computer up to speed for Android development I understand.
Sent from my HP Touchpad using xda premium
I updated through ROM Manager and it worked just fine. I believe as long as you are running the latest version of ROM Manager you shouldn't have any issues.
DEPRECIATED. PLEASE USE TWRP INSTEAD
CWM5 Based recovery for the Motorola Xoom.
Main features:
Tar backups (Application extraction in Titanium backup)
Dual storage support - uses both the internal storage and the external sdcard
Openrecovery scripting support - Supports flashing through the GooManager application
Softkey version available (based on the original touch recovery for the Galaxy Nexus)
Notes:
By default nandroid progress is hidden. To show the nandroid progress, place a file called .shownandroidprogress at /sdcard/clockworkmod
Nandroid backups from an earlier recovery will not work.
Installation
Flash the zip file through recovery.
OR
Flash the image with fastboot
Code:
fastboot flash recovery eos-recovery-r6.img
Downloads:
Normal version
eos-recovery-r6.img
eos-recovery-r6.zip
Softkey Version
eos-recovery-r6-softkeys.img
eos-recovery-r6-softkeys.zip
Softkey means touch recovery?
Thanks!
Gửi từ LT26i của tôi bằng cách sử dụng Tapatalk
Yeah if that means touch recovery, I'm flashing the second I get back from college!
Sent from my ZTE-BLADE using Tapatalk 2
Download link for the softkey.zip doesn't work, but still managed to flash the img version through fastboot.
Thanks for this amazing (first) softkey recovery for xoom
Just flashed! It is not fully touchable! Only softkey!
Uses soft keys and works great. May not be what you call touch. All I know is NO more volume buttons!!
Solarnz, thanks for this great work!
thanks works great!
team eos once again beats team kang ! lol
I hope you release the source, so team kang can get donations for making some minor changes and have a big release. lol
Works great here,softkeys
Thank you Solarnz!
One question though, can I use backups larger then 2.1 GiB with this recovery?
I couldn´t with rouges recovery.. some fault with the tar binary in recovery.
I will try it myself but Ihave to shrink my data partition first...
I have the problem on my galaxy nexus with latest touch CWM
Regards.
th4r
Sent from my MZ601 using Tapatalk 2
The coolest recovery ever seen. Great job done. The softKey version is really great, avoids use of those annoying hardware buttons. Really love it.
EDIT:
-Just found bug with USB mounting from recovery, the eroor message is "E:Unable to open ums lunfile (No such file or directory). I have UMTS 3G MX01 version of xoom. Anyone else found this bug?
Thanks for the recovery with softkey .. having the Nexus I feel at home! and then with the physical buttons are a little annoying, since it has not xoom key performance .. is now much better .. Good going for the great work ..
Maybe i overlook but what is the different between Softkey version and Normal version? thx
cat2115 said:
Maybe i overlook but what is the different between Softkey version and Normal version? thx
Click to expand...
Click to collapse
If I'm assuming correctly, softkey= touchscreen and normal=volume rocker
Also, I would like to say to the dev, Thank you at long last.
Sent from my Xoom using XDA Premium HD app
False sense of hope :'(
http://img.ly/gYiW
The four bottoms on the bottom of the screen are as follows from left to right:
Back
Up
Down
Enter/Select
The options can't be physically touched. You have to use the soft keys to scroll through the options.
Still better than using the volume rocker and power button but not what I was expecting.
Sent from my MB860 using xda premium
all hail solarnz He is a legend i have too donate again!
---------- Post added at 04:50 PM ---------- Previous post was at 04:40 PM ----------
All working perfectly and loving the "soft"touch recovery it so sweet!
d3athsd00r said:
False sense of hope :'(
http://img.ly/gYiW
The four bottoms on the bottom of the screen are as follows from left to right:
Back
Up
Down
Enter/Select
The options can't be physically touched. You have to use the soft keys to scroll through the options.
Still better than using the volume rocker and power button but not what I was expecting.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
[huh?]
----------------------------------------------
This is frikkin awsome solarnz! Thanks so much for your work
It got frustrating with those little volume buttons, and coming here from touch on my Nexus S was an adjustment... but this is great
I was hoping someone would would do this for the Xoom. It is very similar to the amon ra style recovery I use on my OG EVO. Thanks for your great work.
CWM5 Based recovery for the Motorola Xoom.
Fantastic! Small donation was made...you deserve much more!
d3athsd00r said:
False sense of hope :'(
http://img.ly/gYiW
The four bottoms on the bottom of the screen are as follows from left to right:
Back
Up
Down
Enter/Select
The options can't be physically touched. You have to use the soft keys to scroll through the options.
Still better than using the volume rocker and power button but not what I was expecting.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
... What did you think "Softkeys" meant? There is a reason why I didn't say it was a touch recovery...
I for one appreciate this use of soft keys. I fat finger too often and I can't imagine having to touch each command line.
Bottom line, this is great and works for me! Thanks solarnz. My physical buttons and my fat fingers thank you!
Proposition
I started with your stuff when I first got my Xoom, great work. I see no reason to go anywhere else.
Hello! Here you'll find the latest and greatest mods and such to improve your experience with the SGH-T989!
To be clear, I take no credit for these mods unless stated otherwise.
Audio Mods:
AC!D Audio: http://forum.xda-developers.com/showthread.php?t=1923630
AWESOME Beats: http://forum.xda-developers.com/showthread.php?t=1728391
Walkman V Clear Audio+: http://forum.xda-developers.com/showthread.php?t=2149122
Performance Mods:
CrossBreeder: http://forum.xda-developers.com/showthread.php?t=2113150
NOS Injection: http://forum.xda-developers.com/showthread.php?t=2158329
Seeder: http://forum.xda-developers.com/showthread.php?t=1987032
V6 SuperCharger: http://forum.xda-developers.com/showthread.php?t=991276
Planning to add TONS more, but I'm afraid I'm busy atm.... Want to share? Go ahead and I'll add to the OP!
excellent contribution cory...These applications are installed in the recovery mode...?
mataflakitas said:
excellent contribution cory...These applications are installed in the recovery mode...?
Click to expand...
Click to collapse
Some are and some aren't. Just click the link to see how to use it
I may add descriptions later!
Thanks Cory
This will be very helpful for any newbies
EDIT:
Should be stickied as well
Has anyone tried to use all of these mods at the same time?
Sent from my SGH-T989 using xda premium
blachamlet said:
Has anyone tried to use all of these mods at the same time?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
They'll conflict
Thanks Cory! All your work is appreciated.
Don't forget to add kingbeatz in the skyrocket forum. Good thread btw
Sent from my Zapped SGH-T989 using Supercharged Slim Bean
Very useful post! Subscribed
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Finally thanx for this
AOKP B4 NOS V0.0.7
blachamlet said:
Has anyone tried to use all of these mods at the same time?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I'm running the nos and acid on pac with asdk. i tried flashing the crossbreader on top, it was a no go....
update:
was able to install the crossbreeder...reinstall the kernel, then the crossbreeder then nos. works fine now
I'm looking to flash the Nos and Walkman but both OP states to flash with CWM. Anyone tried with TWRP or am I better off just installing CWM and using that instead?
koudies said:
I'm looking to flash the Nos and Walkman but both OP states to flash with CWM. Anyone tried with TWRP or am I better off just installing CWM and using that instead?
Click to expand...
Click to collapse
nos doesnt work well with twrp, it reboots the recovery. not sure about walkman. only takes a min to switch from twrp to cwm...and back...just make sure you do a nandroid with cwm before you flash.
zxstyle07 said:
nos doesnt work well with twrp, it reboots the recovery. not sure about walkman. only takes a min to switch from twrp to cwm...and back...just make sure you do a nandroid with cwm before you flash.
Click to expand...
Click to collapse
Oh okay. Didn't know it was that easy to switch between the recoveries. Will give it a try. Thanks.
Sent from my SGH-T989 using xda app-developers app
koudies said:
Oh okay. Didn't know it was that easy to switch between the recoveries. Will give it a try. Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
for cwm, download rom manager then flash recovery(make sure you pick the right one..hercules). for twrp, download goomanager>settings>install openrecovery script>flash...should be 2.4.3.0
---------- Post added at 12:08 PM ---------- Previous post was at 11:38 AM ----------
the cross breeder and now combo worked fine until i try to boost the ram...black screened then after i restarted it, no data...back to crossbreeder for now.
zxstyle07 said:
for cwm, download rom manager then flash recovery(make sure you pick the right one..hercules). for twrp, download goomanager>settings>install openrecovery script>flash...should be 2.4.3.0
---------- Post added at 12:08 PM ---------- Previous post was at 11:38 AM ----------
the cross breeder and now combo worked fine until i try to boost the ram...black screened then after i restarted it, no data...back to crossbreeder for now.
Click to expand...
Click to collapse
Check this link out http://forum.xda-developers.com/showthread.php?p=26200755 its for a recovery switcher apk that allows u to change from cwm touch to twrp in one convenient app.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
biglil1 said:
Check this link out http://forum.xda-developers.com/showthread.php?p=26200755 its for a recovery switcher apk that allows u to change from cwm touch to twrp in one convenient app.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
very nice. thank you
update, its pretty outdated. i rather just not use it. just personal preference...very useful though
zxstyle07 said:
very nice. thank you
update, its pretty outdated. i rather just not use it. just personal preference...very useful though
Click to expand...
Click to collapse
Yea, in the zip file the IMG of cwm and twrp are old but I downloaded newest then put both on internal SD. Works gr8t. Make sure that they are separate and if you have to rename the img file
Cwm: name to touch.img ( if its the touch img, idk what to name non touch, I don't use)
Twrp: name as twrp.img
After that should work, that's how I put the latest twrp on my phone.
Edit: I need to learn to check things b4 I speak lol!! I used it to install twrp 2.4.2.0 Sorry about that didn't mean to intentionally mislead anyone. Should still work. Just make sure that when u download either img file u change the name to how I outlined. Phone is almost dead I'll get the latest twrp img from computer. Well post back with results
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
biglil1 said:
Yea, in the zip file the IMG of cwm and twrp are old but I downloaded newest then put both on internal SD. Works gr8t. Make sure that they are separate and if you have to rename the img file
Cwm: name to touch.img ( if its the touch img, idk what to name non touch, I don't use)
Twrp: name as twrp.img
After that should work, that's how I put the latest twrp on my phone.
Edit: I need to learn to check things b4 I speak lol!! I used it to install twrp 2.4.2.0 Sorry about that didn't mean to intentionally mislead anyone. Should still work. Just make sure that when u download either img file u change the name to how I outlined. Phone is almost dead I'll get the latest twrp img from computer. Well post back with results
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
sweet. got them to work
zxstyle07 said:
sweet. got them to work
Click to expand...
Click to collapse
Was just about to update my post. Glad u got it to work. I just downloaded twrp 2.4.3.0 and it works.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Krabappel2548 is proud to present
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
WORKING:
- All functions should be working
NOT WORKING:
- Let me know and I'll try to fix it
INSTALLATION:
- Flash via fastboot: fastboot flash boot boot-twrp-test.img
Please don't mirror my download links or steal my work!
DOWNLOAD:
- Stock rom: TWRP 2.5.0.0 for xperia ZL stock
CREDITS:
- Dees-troy for a lot of help
- Snowman77 and nick holtus for helping me
- Doomlord for some things too
BUGS:
Report the bugs here for now, once the recovery is fully stable, I'll let Teamwin know Xperia Z is supported.
SOURCES:
Xperia Z TWRP sources: twrp_sony_yuga
CHANGELOG for 2.5.0.0:
Special Note: If you are running a custom theme, you will likely need to remove that theme before updating to 2.5.0.0 as your custom theme will likely not be compatible with the new changes!
-Added scrollable partition lists for mount, backup, restore, wipe, and storage selection
-Add new SliderValue GUI element for selecting brightness and screen timeout (thanks to Tassadar)
-Re-work AOSP and TWRP code to improve license compatibility between GPL and Apache
-Added official theme for 1080x1920 portrait devices (HTC One m7, HTC DNA, HTC Butterfly, Oppo Find 5, Sony Xperia Z, etc)
-Fixed a problem with directory permissions on split archive backups (backups usually restored with no app data)
-Fixed a problem with md5 verification of backups
-Added a search function to libtar (thanks to kokotas)
-Improve handling of XML errors (fix permissions)
-Fixed handling of subpartitions
-Improvements to recovery.fstab flags
-Fixed a problem with decryption not being able to locate the decryption key in some situations
CHANGELOG for 2.4.3.0 test:
- Fixed settings => screen: brightness changing is working now.
- Updated to .434 fw version
- Fixed internal storage
- Fixed layout (may be small errors, but I needed to create a complete new mayout for 1080x1920)
- Fixed cache issue
- Fixed backup issue, won't backup internal storage data anymore
- Fully functional and working as it should
- First release for Xperia ZL
- All basic functions are working
Thanks a lot
Will give a try and let u know
Happy flashing
Thanks man! No cm support yet, right?
Sent from my C6506 using Tapatalk 2
apascual89 said:
Thanks man! No cm support yet, right?
Sent from my C6506 using Tapatalk 2
Click to expand...
Click to collapse
I'll post cm version today
btw, can anyone confirm that the recovery works properly first?
Sent from my C6603 using xda app-developers app
I flashed it, but either I didn't know how-to get into the recovery, or it didn't work. Flashing CWM, worked right away.
Sent from my C6506 using xda app-developers app
darkjedi said:
I flashed it, but either I didn't know how-to get into the recovery, or it didn't work. Flashing CWM, worked right away.
Sent from my C6506 using xda app-developers app
Click to expand...
Click to collapse
Did you get purple LED while booting?
Sent from my C6603 using xda app-developers app
krabappel2548 said:
I'll post cm version today
btw, can anyone confirm that the recovery works properly first?
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
If it helps move it along, I can go back to stock to help test in a couple of hours
Sent from my C6506 using Tapatalk 2
krabappel2548 said:
Did you get purple LED while booting?
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Yup and with CWM, I'd press the volume up button when I saw the purple LED. But doing that didn't do anything when I flashed TWRP. Does it matter if I had CWM installed previously?
Is it possible to get it working on LOCKED bootloaders also??? I know I will unlock eventually but I still currently don't want to let go of the Bravia Engine 2
Thanks
darkjedi said:
Yup and with CWM, I'd press the volume up button when I saw the purple LED. But doing that didn't do anything when I flashed TWRP. Does it matter if I had CWM installed previously?
Click to expand...
Click to collapse
ok, I think I know the problem, will fix it tomorrow
krabappel2548 said:
ok, I think I know the problem, will fix it tomorrow
Click to expand...
Click to collapse
Sorry to ask, but any progress??
apascual89 said:
Sorry to ask, but any progress??
Click to expand...
Click to collapse
Yes, will post it tomorrow, gotta sleep now
Sent from my C6603 using xda app-developers app
Will it be ported for LOCKED bootloader???
shivindera said:
Will it be ported for LOCKED bootloader???
Click to expand...
Click to collapse
Yes, just need to reinstall Linux again, my pc crashed
Sent from my C6603 using xda app-developers app
krabappel2548 said:
Yes, just need to reinstall Linux again, my pc crashed
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Oh no! How'd that happen?
TWRP 2.50
I looked at your sources and got TWRP 2.5 built and booted for cm-10.1! I'm testing it out and so far seems to be working as it should.
Spoke too soon. after making a backup, it now is stuck in boot animation
What did you do to fix the reboot into recovery issue?
darkjedi said:
Yup and with CWM, I'd press the volume up button when I saw the purple LED. But doing that didn't do anything when I flashed TWRP. Does it matter if I had CWM installed previously?
Click to expand...
Click to collapse
Correct me if I am wrong but dont you need to press VOL DOWN to enter recovery? VOL UP is to enter FASTBOOT
anirudh412 said:
Correct me if I am wrong but dont you need to press VOL DOWN to enter recovery? VOL UP is to enter FASTBOOT
Click to expand...
Click to collapse
Volume up or down actually works for cwm.
apascual89 said:
No, volume up is recovery when booting up. When off and plugging into pc then volume up takes you to fastboot.
Click to expand...
Click to collapse
My phone must be high or something then, I have been pressing the VOL DOWN button always to enter into recovery. Tried it now again, and VOL DOWN works. Maybe darkjedi should give that a try too?
Hi Guys,
About TWRP:
Team Win Recovery Project 2.x, is a custom recovery built with ease of use and customization in mind. The GUI is also fully XML driven and completely theme-able.
How to install -
1. Connect NexusS4g to computer.
2. Type the following :-
a. adb reboot bootloader. ( Wait till it gets to boot loader )
b. fastboot flash recovery "location to twrp image"
Special Thanks,
1. Dees_Troy
2. Cyanogen
Build 1 - v 2.7.0.0
Download Image :- https://drive.google.com/file/d/0B9X29cIkNoQEb05LQUVfOGFUMXc/edit?usp=sharing
Download Zip :- https://drive.google.com/file/d/0B9X29cIkNoQEWVJ0eWh4MmdMSTg/edit?usp=sharing
WTF only 1 thanks with all these views, this device cant be that dead. thank you for the recovery.
Sent from my Icrap Killer using Tapatalk
dzee206 said:
WTF only 1 thanks with all these views, this device cant be that dead. thank you for the recovery.
Sent from my Icrap Killer using Tapatalk
Click to expand...
Click to collapse
Both phones are going slowly into the night.. But efforts to keep it up to date are greatly appreciated..
Setting.Out said:
Both phones are going slowly into the night.. But efforts to keep it up to date are greatly appreciated..
Click to expand...
Click to collapse
if i could ever get the hang of porting gsm to cdma i'll throw my name in to the mix and help put some life back in this device, sadly nothing but failed attempts so far.
How do you download the zip I click the link and it takes me to the zip already opened
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
weedolo9y said:
How do you download the zip I click the link and it takes me to the zip already opened
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Just ctrl+s on your keyboard or klik file and there is a download command
I dont think the device is dead.. Its around 4 generations old. Yet is able to stand its ground and has the latest and greatest OS running on it.
I personally am planning to use and update the device till it can take no more :angel:
Can we flash the zip file in recovery to update or do we have to hook up to computer???
what happened to the mount usb in mount....now i cant transfer files in recovery?
zak7 said:
what happened to the mount usb in mount....now i cant transfer files in recovery?
Click to expand...
Click to collapse
Use nexus root tool kit and boot the included recovery temporarily, it has working USB..
Sent from my One using XDA Premium 4 mobile app
Guys, I spent a long time starting with deodexed 4.1.1 stock, added Xposed module and Blackout theme and swapped in all inverted current apps then reodexed but.....since I changed TWRP above 2.5.0.0 my backup is restoring incomplete. I am sticking with a backup of 4.1.1 because WifiTether works on WiMax but not after 4.1,1 so I want a nandroid that restores fully. Is it because TWRP is full SELinux now?
Sent from my HTC One using Xparent Gray Tapatalk 2
If you take the nandroid with the new version you'll probably have better luck. Only other thing I've seen, and granted this was on my s3, but with one of the versions I couldn't restore unless I kept the screen on during the restore. But I've also seen restore fail because of the first item too after upgrading recovery and then trying to restore a backup made with an older recovery