Hello.
I have an unlocked SGH-I317 from AT&T, I live in México and my cellular operator is Telcel.
Can I install a ROM from the SGH-I317M model Telcel is selling in México? Can I install a ROM from the SGH-I317M being sold in Canada?
I've found this ROMs, and their related information:
AT&T : I317UCAMA4_I317ATTAMA4_ATT.zip | 848.6 MB
Model: SGH-I317
Country: USA (AT&T)
Version: Android 4.1.2
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: ATT
PDA: I317UCAMA4
CSC: I317ATTAMA4
MODEM: I317UCAMA4
Telcel: I317MUMBMB1_I317MTCEBMB2_TCE.zip | 988.9 MB
I317MUMBMB1_I317MTCEBMB2_TCE.zip | 988.9 MB
Model: SGH-I317M
Country: Mexico (Telcel)
Version: Android 4.1.2
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: TCE
PDA: I317MUMBMB1
CSC: I317MTCEBMB2
MODEM: I317MUMBMD1
Canada: I317MVLBMA3_I317MOYABMA3_VMC.zip | 885.9 MB
Model: SGH-I317M
Country: Canada
Version: Android 4.1.2
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: VMC
PDA: I317MVLBMA3
CSC: I317MOYABMA3
MODEM: I317MVLBMA3
I see the Modems are different versions... how will that affect my phone if I use any of the Canada or Telcel ROMs?
What is PDA and CSC?
Besides the need to use "Odin", which other things should I consider to do this? How should I backup my phone?
Thanks...!
Ok flashing other modem's on a device that it, isn't ment for will give you lots of PROBLEMS! FYI
If your looking for a Rom to flash find something that don't include a modem. And you should be OK. But if you find something from your county then you might get all the features they offer.
Personally I think that you need to do a lil (well quite a bit I'd say) reading up on the Android flashing, Rom's, etc!
But making a back up is best thru your recovery! I prefer TWRP recovery, found HERE: http://forum.xda-developers.com/showthread.php?p=33867032
Look HERE for INFO:
http://forum.xda-developers.com/showthread.php?p=38949514
What is CSC?
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
What is PDA?
PDA refers to the build version of the software/firmware
Hopefully this info will get you on your way! Good luck buddy...
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
I have a Telcel i317m... in case you are interested in custom ROMs, you can flash any ATT (t0lteatt) or international gt 7105 (t0lte) ROMs with no problems.
Few ROMs will flash a modem and CSC... but you can always restore the originals from recovery
@Bajanman.......ya. ALOT of researching to do. ALOT!
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2
softballjunkee13 said:
@Bajanman.......ya. ALOT of researching to do. ALOT!
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Lol.. you're exactly right... lots of research needs to be done
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
There's no point in flashing US or Canadian carrier's roms. They will install lots of apps you can't use.
You are better off using a debloated stock~ish rom like Cleanrom or Jedi. I have Cleanrom and I use a Tecel sim when I cross the border.
Not receiving 4G anymore
Hey guys, need help very badly.
I've a AT&T i317 unlocked, I'm from India, got the phone from US. Used to get 4G all the time when i was on stock ROM. Then i decided to go custom and installed Ditto Note 3 Rom v3.0 and continued receiving 4G. Then as the rom was unstable i'd to upgrade it to v3.1 and for a few days i did get 4G. But the thing with v3.1 is it comes with aroma installer and we were asked to install the rom which was meant for N7105 rather than i317 orelse the phone would be stuck at the samsung glowing logo forever!
So as instructed i did select N7105 and it changed a few settings but still was able to get 4G. Then came the worst part, i out of curiosity tried installing the rom for i317 and got stuck on samsung glow logo and again reinstalled the N7105 rom.
But on the installation process i observed that when i do a DATA/FACTORY RESET, it did not wipe the internal memory, so i did it manually in the phone settings and then installed N7105 which turned my phone completely into N7105! and ever since i lost 4G. :crying:
Then i tried installing V3.1 and check for 4G but with no luck.
So please help me out.
And what im thinking is if may be i can get a stock i317 rom that samsung released, i can instal it and do a factory reset and get my phone to be like when it came out from the factory and it might solve the problem coz i hate 2G! It sucks. And im not able to find the stock rom, please share me the link if any or suggest me something guys please!
Look HERE:
http://forum.xda-developers.com/showthread.php?p=48935684
And you can also look here for more info to get back to stock!
http://forum.xda-developers.com/showthread.php?p=41340941
SENT FROM MY SAMMY TO YOUR? EYES USING TAPTALK
Thanx bajanman will give it a try. Appreciate the help brother!
And can any one please send me their AT&T I317 build.prop file please
Sent from my GT-N7105 using XDA Premium 4 mobile app
Abhilash.H.M said:
Thanx bajanman will give it a try. Appreciate the help brother!
And can any one please send me their AT&T I317 build.prop file please
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can grab a build.prop from one of the links @Bajanman posted
Here
http://forum.xda-developers.com/showthread.php?p=48935684
DL AT&T UCUBMK6 i317 *Odexed* Stock CWM Note 2 extract it and grab build.prop from /system/app. It's stock so no fluff.
It's also good to have that file as a back up since it has the stock files.
Either odex or deodex package will do, but don't try this with the odin package unless you have a utility that will read and extract ext4 image contents.
I've attached the build.prop in case that is all you need.
Thanx brother
dicksteele said:
You can grab a build.prop from one of the links @Bajanman posted
Here
http://forum.xda-developers.com/showthread.php?p=48935684
DL AT&T UCUBMK6 i317 *Odexed* Stock CWM Note 2 extract it and grab build.prop from /system/app. It's stock so no fluff.
It's also good to have that file as a back up since it has the stock files.
Click to expand...
Click to collapse
Thank you bro, but finally figured out that it was the problem from my carrier and not the phone! now i get 4G but the speed is damn slow compared to previous experiences!
Related
Hi,
I'm fairly educated in rooting and flashing custom ROM (First Galaxy S, HTC HD7, Galaxy Nexus), but I've been hit by a little problem with my Galaxy Note II.
I have the Canadian model SGH-I317M on Telus (Quebec, Canada). This model is quite special,and we can't just flash N7100 ROMs directly on it as you guys may already know.
This is why I'm posting on AT&T's forum (SGH-I317).
Yesterday I flashed one of the available ROMs (NOTEorious prime), and everything worked and ran smoothly as expected, except one thing: Data connection. I wrote down my APNs and made sure at least 10 times they were OK. I also reverted to default, re-entered them and rebooted several times. No chance.
I guess it has to be something related to AT&T's kernel included with the ROM, but since SGH-I317M is such a shady model I'm struggling for information. I did my search on the forums and saw nothing clear and precise on what to do exactly.
For now I restored my backup to stock rooted ROM. Unfortunately I was out of time and didn't try an other ROM. But as soon as I'm out of the office I'll download an other one. Still, NOTEorious was very appealing and I would like to make it work.
So here I am, asking you if you encountered the problem. If not, I am willing to dive into the problem with experienced users if necessary. I have never done advanced stuff beyond rooting and flashing my devices, but I'm a software analyst. I can learn.
Oh and, please bear with my English skills, it's not my native language !
Thank you
How did you confirmed that LTE is not working?
With some ROMs (i use Jedi X on rogers) you won't see the LTE icon but 4G instead in the status bar, and the normal 4G is H+
test with speedtest.net just to be sure that you really have a problem.
rotule said:
How did you confirmed that LTE is not working?
With some ROMs (i use Jedi X on rogers) you won't see the LTE icon but 4G instead in the status bar, and the normal 4G is H+
test with speedtest.net just to be sure that you really have a problem.
Click to expand...
Click to collapse
I disconnected Wireless and tried to search google using chrome. No data connection.
I should have specified that i simply have no data :S Sorry
EDIT: Changed in the main post
i've had this problem on previous phones where data wouldn't connect when flashing a rom... it was as simple as the modem not being compatible with my network.
Try pulling and flashing a telus modem with your new rom and see if that helps.
JGGW said:
i've had this problem on previous phones where data wouldn't connect when flashing a rom... it was as simple as the modem not being compatible with my network.
Try pulling and flashing a telus modem with your new rom and see if that helps.
Click to expand...
Click to collapse
Thanks for the tip ! Never had to do this before.
It doesn't seem to be any telus modem, but a guy pointed out that using Rogers' work. I will try it out and update as soon as I can.
I have the telus model too and was encountering the same data problems until.....
Flashed Clean Rom 3.3. I highly recommend it. When flashing it it asks you what carrier and you can select Telus. I didn't have to change any carrier settings and lte worked and even had the icon. It is a super fast and stable rom too.
Select the perseus kernel in the flashing options as well.
Phone: Galaxy Note II - SGH-i317M* Provider: Telus Rom: CleanROM 3.3 (JB 4.1.2) Kernel: Perseus (alpha28.2) Recovery: TWRP
--------------
Thanks to the Devs hard work and the power of sharing!
Gucci.Nexus said:
I have the telus model too and was encountering the same data problems until.....
Flashed Clean Rom 3.3. I highly recommend it. When flashing it it asks you what carrier and you can select Telus. I didn't have to change any carrier settings and lte worked and even had the icon. It is a super fast and stable rom too.
Select the perseus kernel in the flashing options as well.
Phone: Galaxy Note II - SGH-i317M* Provider: Telus Rom: CleanROM 3.3 (JB 4.1.2) Kernel: Perseus (alpha28.2) Recovery: TWRP
--------------
Thanks to the Devs hard work and the power of sharing!
Click to expand...
Click to collapse
Do you remember if it asks if rogers is in the list?
I don't remember
Phone: Galaxy Note II - SGH-i317M* Provider: Telus Rom: Stock (JB 4.1.1) (unrooted) Kernel: Stock Recovery: TWRP
--------------
Thanks to the Devs hard work and the power of sharing!
As-tu réussi èa faire quelque chose avec ton GN2 ?
dbRenaud said:
As-tu réussi èa faire quelque chose avec ton GN2 ?
Click to expand...
Click to collapse
XDA rules state that you must post using the English language please....
Thank you.....g
Try a different ROM like Jedi. It retains your modem on the 317m. and in the case something gets changed, you can also flash the modems as a .zip on the same thread.
The key to flashing att rom to our Canadian devices is having patch designated to our carriers. I always flash Rogers modem with ril and csc patch and never had any data problems and yeah most of roms I flashed to my phone are att roms.
Sent from my SGH-I317M
jon3sh said:
The key to flashing att rom to our Canadian devices is having patch designated to our carriers. I always flash Rogers modem with ril and csc patch and never had any data problems and yeah most of roms I flashed to my phone are att roms.
Sent from my SGH-I317M
Click to expand...
Click to collapse
Could you explain a little bit how you do it?, because I actually having the same problem. Thanks!
Enviado desde mi SAMSUNG-SGH-I317 usando Tapatalk 2
john2021p said:
Could you explain a little bit how you do it?, because I actually having the same problem. Thanks!
Enviado desde mi SAMSUNG-SGH-I317 usando Tapatalk 2
Click to expand...
Click to collapse
Download modem with ril and your csc from link below and use it to flash after flashing your rom. You will need to flash them after you flash your rom before reboot.
http://forum.xda-developers.com/showthread.php?t=2016575
Sent from my SGH-I317M
Thanks bro! I will do it and leave you feedback.
Just another thing I have I317M but I want to used it on ATT it doesn't matter the network I need to use the one from roger/telus right after install the N7105 rom, right?
If your still having problems I had the same model phone just with bell but I can't help you in any way you need I know some good ROMs that really work well and I should be able to help with the data too
Sent from my SGH-I317M using xda app-developers app
userdefind said:
If your still having problems I had the same model phone just with bell but I can't help you in any way you need I know some good ROMs that really work well and I should be able to help with the data too
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
Im still having data and voice problems, actually I just put the sim and it have a little bit of ATT signal and then it goes off with a circle in the bar icon, I already do a lot of things like change modems, rom, kernels, unlock change imei, I order a new sim connector wich comes with sd card reader I believe this is the problem in other case if doesn't work I guess is a hardware like radio or modem failure wich will be a mess because I spend already 350 dollars for the Note2. Just waiting for the sim flexible to come and test if it works. Any other suggestions I will be all ears. Thanks guys!
I'm guessing you have a recovery then if your flashing modems. What recovery are you using. Did you make a backup of the stock rom. If your using teamwin did you make a fill backup with the modem and efs from your stock backup. And if you restore back to the start dose that fix your problem. Sorry just need some info to help you out
Sent from my SGH-I317M using xda app-developers app
userdefind said:
I'm guessing you have a recovery then if your flashing modems. What recovery are you using. Did you make a backup of the stock rom. If your using teamwin did you make a fill backup with the modem and efs from your stock backup. And if you restore back to the start dose that fix your problem. Sorry just need some info to help you out
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
Well I made a backup and yes is with TWRP, actually I already have one in CWM too, I dont remember if it have the stock modem but probably not. I start from first backup and it doesn't fix the problem.
john2021p said:
Well I made a backup and yes is with TWRP, actually I already have one in CWM too, I dont remember if it have the stock modem but probably not. I start from first backup and it doesn't fix the problem.
Click to expand...
Click to collapse
If im not mistaken your phone is from Telus and you wanna use att service. Did you unlock your phone yet to use it with other network other than Telus?
Sent from my SGH-I317M
Hi guys,
The latest firmware 4.3 was released early today in my region.Malaysia.
Was wondering if there was anyone still doing the pre-rooted stuff as i know Dr.Ketan is busy with his Note3 device and A.S.id is nowhere to be found.
It would be great if some other persons could create the knox free pre-rooted firmware.
If i only knew how to do this i would not be creating this thread.
GT N7100
Malaysia
Android ver: 4.3
Changelist: 2229877
Build date:Mon,09 Dec 2013 01:37:56+0000
Product code: XME
PDA: N7100 XXUEML3
CSC: N7100 OLBEM1
MODEM: N7100 XXUEMK1
Sandro8771 said:
Hi guys,
The latest firmware 4.3 was released early today in my region.Malaysia.
Was wondering if there was anyone still doing the pre-rooted stuff as i know Dr.Ketan is busy with his Note3 device and A.S.id is nowhere to be found.
It would be great if some other persons could create the knox free pre-rooted firmware.
If i only knew how to do this i would not be creating this thread.
GT N7100
Malaysia
Android ver: 4.3
Changelist: 2229877
Build date:Mon,09 Dec 2013 01:37:56+0000
Product code: XME
PDA: N7100 XXUEML3
CSC: N7100 OLBEM1
MODEM: N7100 XXUEMK1
Click to expand...
Click to collapse
There should not be any difference between ML3 and Others.. I have tried.. MKD and MK9 both performa the same for me..!
Dont think that samsung will give malaysias better 4.3 and indian a poor one??
geekynoob said:
There should not be any difference between ML3 and Others.. I have tried.. MKD and MK9 both performa the same for me..!
Dont think that samsung will give malaysias better 4.3 and indian a poor one??
Click to expand...
Click to collapse
Either you are dumb or just plain stupid to answer in such a manner to a very simple question.
Did you read the heading of this thread?
All I wanted to know was that if there was going to be someone else apart from the 2 persons mentioned above who might be preparing a pre-rooted/deknoxed of the said firmware.
Now do you see anywhere in the text any refferal whatsoever degrading samsung or or any nationality.
And this sort of remark coming from you is uncalled for.
Sent from my GT-N7100 using xda premium
Sandro8771 said:
Either you are dumb or just plain stupid to answer in such a manner to a very simple question.
Did you read the heading of this thread?
All I wanted to know was that if there was going to be someone else apart from the 2 persons mentioned above who might be preparing a pre-rooted/deknoxed of the said firmware.
Now do you see anywhere in the text any refferal whatsoever degrading samsung or or any nationality.
And this sort of remark coming from you is uncalled for.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
You said that it would be great if someone could create a pre-rooted firmware of the latest release..
All he was trying to say is that there is no noticeable difference between all these mk9/mkd/ml3 so you may flash mk9 or mkd pre rooted/deodexed which has been posted by someone in android dev section
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
All he was trying to say is that there is no noticeable difference between all these mk9/mkd/ml3 so you may flash mk9 or mkd pre rooted/deodexed which has been posted by someone in android dev section.
Then he should have just stopped there.
No need for the later remark.
Click to expand...
Click to collapse
I used Odin to flash the nf3 tar. I'm in the U.S...the tar was for united kingdom. Thought it was OK to do so after researching. Well I'm getting constant phone force closes.! My question is can i flash the nd3 tar labeled for cellular south without issue? Thanks for any help!
strive53 said:
I used Odin to flash the nf3 tar. I'm in the U.S...the tar was for united kingdom. Thought it was OK to do so after researching. Well I'm getting constant phone force closes.! My question is can i flash the nd3 tar labeled for cellular south without issue? Thanks for any help!
Click to expand...
Click to collapse
Worked for me. You might need to factory reset after flashing (using stock recovery)
Yea I got home and realized wat I did. Loaded my tar in the right slot this time and now everything is fine. Smh!
strive53 said:
Yea I got home and realized wat I did. Loaded my tar in the right slot this time and now everything is fine. Smh!
Click to expand...
Click to collapse
So everything is fine now on the United Kingdom firmware?
nickster1 said:
So everything is fine now on the United Kingdom firmware?
Click to expand...
Click to collapse
Yes!
Can someone help me understand way Sammobile doesn't list any firmware for the US region? I am scratching my head on this one. I'll try some other country's, but does anyone know what the most current US firmware is for the 10.1?
RiverCity.45 said:
Can someone help me understand way Sammobile doesn't list any firmware for the US region? I am scratching my head on this one. I'll try some other country's, but does anyone know what the most current US firmware is for the 10.1?
Click to expand...
Click to collapse
XAR is the US version Cellular South......HOWEVER...
The current version on the Samobile site appears to be defective in that it won't extract to a zip file for Odin.
Model: SM-T320
Model name: GALAXY TabPRO 8.4 Wi-Fi
Country: Cellular south
Version: Android 4.4.2
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: XAR
PDA: T320UEU1ANG1
CSC: T320XAR1ANG1
MODEM: T320UEU1ANG1
I used the Canadian version with NO issues.
( Just have to remember to add a ". A?" after any ".com" address):silly:
i have the t mobile SGH-T889 which has been unlocked by tmobile.
im now running the AT&T sim card......
is there anyway for me to install the
AT&T SGH-I317 firmware on the tmobile SGH-T889 ?
it already has the 4.3 firmware...
SaTxCowboy said:
i have the t mobile SGH-T889 which has been unlocked by tmobile.
im now running the AT&T sim card......
is there anyway for me to install the
AT&T SGH-I317 firmware on the tmobile SGH-T889 ?
it already has the 4.3 firmware...
Click to expand...
Click to collapse
Just make certain you don't flash the AT&T modem. There are AT&T roms available on their subforum.
You should be fine.
ATT
Coug76 said:
Just make certain you don't flash the AT&T modem. There are AT&T roms available on their subforum.
You should be fine.
Click to expand...
Click to collapse
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
SaTxCowboy said:
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
Click to expand...
Click to collapse
You can always edit your build prop to show different carrier, device, etc..
SaTxCowboy said:
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
Click to expand...
Click to collapse
Yup. That is a build.prop edit to change the N7105. There is a T889 and a I317 LS.
DS-NE5v1 rom
ok. im now running the DS-NE5v1 rom...
its a very good rom....but is there away i can change the AT&T boot screen ?
its jes a white back ground wif tha AT&T logo on the center ?
i would like to have AT&T animated one from firmware 4.1.2.......its animated.....
what do i do now ?
or jes leave it b !!!
AT&T
i would like to have this on my SGH-T889.unlocked and rooted...
what do i have to do ?
Android version: 4.4.2
Baseband version: T889UVUCMK7
Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014
is it possible ?
tmobile said the 4.3 is the final for the SGH-T889 !!!!
what program
Coug76 said:
Yup. That is a build.prop edit to change the N7105. There is a T889 and a I317 LS.
Click to expand...
Click to collapse
what program do i use to change it..build.prop ?
SaTxCowboy said:
what program do i use to change it..build.prop ?
Click to expand...
Click to collapse
Buildprop editor from play store
wifi calling
mexigga said:
Buildprop editor from play store[/QUOT
how do i enable wifi calling ?
on a SGH-T889 rooted & flashed to SGH-I317 ?
Click to expand...
Click to collapse
wifi calling only works on t-mobile touch wiz roms. ie jedi x 2. any aosp roms such as cm11, jedi open source(built off cm11), carbon, aokp won't have wifi calling
changed kernel
i have no idea what happend with the Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014.....
i redid my cell 2 get more space after awhile......
but when i put the same ROM (i think) the i317-cwm-ucucne5-rooted-deodex.
but when i installed it.....my modem was already working, but my camera dont work...
it says camera failed....
i checked the kernel and it has india in it ?
i even tried the cwm-i317-ucucne5-kernel.
which got stuck at the att boot screen for over 15 minutes ?
HELP !!!
SaTxCowboy said:
i would like to have this on my SGH-T889.unlocked and rooted...
what do i have to do ?
Android version: 4.4.2
Baseband version: T889UVUCMK7
Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014
is it possible ?
tmobile said the 4.3 is the final for the SGH-T889 !!!!
Click to expand...
Click to collapse
after days of searching......
i cant seem 2 find the Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014 ???
any help will b grateful....
thx
SaTxCowboy said:
mexigga said:
Buildprop editor from play store[/QUOT
how do i enable wifi calling ?
on a SGH-T889 rooted & flashed to SGH-I317 ?
Click to expand...
Click to collapse
These rom questions are great questions but they belong in the forum for the ROM you are running. However, you CANNOT get wifi calling from the AT&T Rom. It will only work on the T-Mobile stock ROM or developer ROMS that have used the T-Mo stock Rom Base. Jedi Master X2 comes to mind.
Please post any other of your questions for the rom you are running in its appropriate forum. I believe you will have better luck. Below is the link to the Ditto Note 3 forum. Good Luck!
http://forum.xda-developers.com/showthread.php?t=2541860
Click to expand...
Click to collapse
Hello,
I have now a Samsung Galaxy Note 2 ( SHV-250S) model, I have rooted the phone because it was stuck on Samsung logo boot screen.
Now I have fixed that problem with the firmware of Note 2 and it is working.
But now is my problem that I can't use my sim card, it doesn't recognize my sim card ?
it can't find any network providers.
I hope you guys can help me.
Friendly regards,
Serdar
serdar-hd2 said:
Hello,
I have now a Samsung Galaxy Note 2 ( SHV-250S) model, I have rooted the phone because it was stuck on Samsung logo boot screen.
Now I have fixed that problem with the firmware of Note 2 and it is working.
But now is my problem that I can't use my sim card, it doesn't recognize my sim card ?
it can't find any network providers.
I hope you guys can help me.
Friendly regards,
Serdar
Click to expand...
Click to collapse
Are you 100% sure you flashed the right firmware?
Also is your IMEI safe?
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Are you 100% sure you flashed the right firmware?
Also is your IMEI safe?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Here are the information that I found on the app "Phone INFO"
What can I do now ? , is this the wrong firmware ?
My IMEI : NULL/NULL
PDA Version : E250SKSUKNF7
Android Version: 4.4.2
Regards,
Serdar
serdar-hd2 said:
Here are the information that I found on the app "Phone INFO"
What can I do now ? , is this the wrong firmware ?
My IMEI : NULL/NULL
PDA Version : E250SKSUKNF7
Android Version: 4.4.2
Regards,
Serdar
Click to expand...
Click to collapse
Flashing correct firmware should not screw up with your IMEI. Find a 4.4.2 stock ROM for your mobile. It should be able to get ur IMEI. Kindly find a correct firmware.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Flashing correct firmware should not screw up with your IMEI. Find a 4.4.2 stock ROM for your mobile. It should be able to get ur IMEI. Kindly find a correct firmware.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I'm now trying flash a another firmware E250SKSUKNE6, I hope this wil solve my problem.
I have installed the new firmware but I have still the same problem. What can I do please help ?
I just went thru this problem
If you flash your stock kernel,modem and recovery via TWRP your sim card will work again.
i searched the forum high ond low and found all 3 zips, flashed them and im back on line. also dont forget to breathe as it cant get any worse
berniebling said:
I just went thru this problem
If you flash your stock kernel,modem and recovery via TWRP your sim card will work again.
i searched the forum high ond low and found all 3 zips, flashed them and im back on line. also dont forget to breathe as it cant get any worse
Click to expand...
Click to collapse
Can you give me the all 3 zips ?
serdar-hd2 said:
Can you give me the all 3 zips ?
Click to expand...
Click to collapse
I cant as they are too large to upload
but all thank go to Zen Arcade, here is a link to the files
http://forum.xda-developers.com/showthread.php?t=2484338
berniebling said:
I cant as they are too large to upload
but all thank go to Zen Arcade, here is a link to the files
http://forum.xda-developers.com/showthread.php?t=2484338
Click to expand...
Click to collapse
Which one I must take ? , there are so many links please help me.
I have the Note 2 E250S version.
Thanks.
serdar-hd2 said:
Which one I must take ? , there are so many links please help me.
I have the Note 2 E250S version.
Thanks.
Click to expand...
Click to collapse
Apologies,
i just saw your model number. for some reason i thought you had a bricked SGH I317
Dis regard all those files!!!!!!!!
You need to find those same exact files for YOUR MODEL DEVICE.
then you need to flash all those files to get your sim card working in your phone.
berniebling said:
Apologies,
i just saw your model number. for some reason i thought you had a bricked SGH I317
Dis regard all those files!!!!!!!!
You need to find those same exact files for YOUR MODEL DEVICE.
then you need to flash all those files to get your sim card working in your phone.
Click to expand...
Click to collapse
No problem anyway thanks for your help , anyone have a solution for me ?
Please help me guys..
Thanks.
serdar-hd2 said:
I have installed the new firmware but I have still the same problem. What can I do please help ?
Click to expand...
Click to collapse
I am sure you flashed this ROM
Model: SHV-E250S
PDA: E250SKSUKNF7
CSC: E250SSKTKNF7
MODEM: E250SKSUKNF4
http://www.sammobile.com/firmwares/3/?download=31755
Your options are limited but you can try out following ROMs:
Model: SHV-E250S
PDA: E250SKSUKNE6
CSC: E250SSKTKNE6
MODEM: E250SKSUKNE5
http://www.sammobile.com/firmwares/3/?download=30343
Model: SHV-E250S
PDA: E250SKSUENC3
CSC: E250SSKTENC3
MODEM: E250SKSUENC3
http://www.sammobile.com/firmwares/3/?download=27356
1.Download both 4.4 and 4.3 ROMs
2.Install Mobile Odin Pro
3.Flash only modem files through Mobile Odin
first E250SKSUKNE5 and E250SKSUENC3 if earlier fails.
Do that and report back. Press thumbs up if you find the suggestions helpful.
Also, there are great many videos on YouTube showing how to restore IMEI. Check them out if you haven't.
ceomaverick said:
I am sure you flashed this ROM
Model: SHV-E250S
PDA: E250SKSUKNF7
CSC: E250SSKTKNF7
MODEM: E250SKSUKNF4
http://www.sammobile.com/firmwares/3/?download=31755
Your options are limited but you can try out following ROMs:
Model: SHV-E250S
PDA: E250SKSUKNE6
CSC: E250SSKTKNE6
MODEM: E250SKSUKNE5
http://www.sammobile.com/firmwares/3/?download=30343
Model: SHV-E250S
PDA: E250SKSUENC3
CSC: E250SSKTENC3
MODEM: E250SKSUENC3
http://www.sammobile.com/firmwares/3/?download=27356
1.Download both 4.4 and 4.3 ROMs
2.Install Mobile Odin Pro
3.Flash only modem files through Mobile Odin
first E250SKSUKNE5 and E250SKSUENC3 if earlier fails.
Do that and report back. Press thumbs up if you find the suggestions helpful.
Also, there are great many videos on YouTube showing how to restore IMEI. Check them out if you haven't.
Click to expand...
Click to collapse
Hello thanks for this information , I downloaded Mobile Odin Pro but it doesn't support my phone.
regards,
Serdar
serdar-hd2 said:
No problem anyway thanks for your help , anyone have a solution for me ?
Please help me guys..
Thanks.
Click to expand...
Click to collapse
bro still you have E250s?
please reply me asap