[TOOL/UTILITY][TWRP][3.1][RECOVERY] TWRP 3.1.0-0 TeamWin Recovery Project

[TOOL/UTILITY][TWRP][3.1][RECOVERY] TWRP 3.1.0-0 TeamWin Recovery Project - T-Mobile Samsung Galaxy Note 3

[RECOVERY] [4/5/16] TWRP 3.1.0-0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.1.0-0 for the Samsung Galaxy Note 3 (T-Mobile)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
hltetmo Device Config: https://github.com/TeamWin/android_device_samsung_hltetmo
Kernel: https://github.com/bigbiff/android_kernel_samsung_smn900t
DOWNLOAD:
All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.
http://twrp.me
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers

Changelog
3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.
3.0.1-0
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
2.8.7.0
- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices (xuefer)
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option - more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won't prompt to install SuperSU and TWRP won't try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don't take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
2.8.6.0
- Allow mulitple overlays for popup boxes (Dees_Troy)
- Add pattern style password entry for decrypt (Tassadar)
- Keyboard improvements (_that)
- Update AOSP base to 5.1 (Dees_Troy)
- Reduce theme count to 5 and rely on scaling (Dees_Troy)
- Various scaling improvements (Dees_Troy)
- Improved handling of resources in the GUI (_that)
- Make scroll bar size proportional to list size (_that)
- Allow scoll lists to render without a header (_that)
- Make console scroll per pixel with kinetic scrolling (_that)
- Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
- Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
2.8.5.0
- Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
- Improve thread handling and move input handling into the main rendering thread to improve stability
- Make MTP work even if unplugged and plugged back in
- Unify scrollable list code and make kinetic scrolling feel more natural
- Fix handling of mapped zip files for OTA updates (CM12 updater)
- USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
- Add Cancel Backup capability
- Other small fixes and improvements
2.8.4.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
- Fix some MTP related crashes and bugs
- Eliminate TWRP toggling USB IDs during boot if MTP is enabled
- Fix various adb sideload issues
- Improve threading of actions
- Eliminate separate thread for screen timeout
- Update libblkid to 2.25.0
- Use power button as back button on watch themes for easier navigation
- Add mutex locking to data manager
- Improve custom theme handling on encrypted devices
- Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
2.8.3.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- MTP will now tell the host PC that storage is removed instead of disabling MTP completely
- MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
- Update and improve fix permissions and make fixing contexts optional
- Update SuperSU in TWRP to 2.40 and update install process
- Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
- Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
- Fix kernel panic during MTP start on some devices
- Support unicode fonts on devices with True Type Font support
- Fix slider value not showing sometimes (vibration settings page)
- Toggle MTP off during adb sideload to set correct USB IDs
- Reduce library requirements for 5.0 L decrypt
- Other minor fixes and improvements
2.8.1.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
- Temperature support - thanks to bigbiff
- Various other bugfixes and tweaks
2.8.0.1
- Fix lag
2.8.0.1
- Fix lag
2.8.0.0
- Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
- Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
- Add support for color in the console and give error, warning, and highlight lines different colors
- Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
- Improve handling of /misc thanks to mdmower
- Improve setting of time on Qualcomm devices thanks to [NUT]
- Allow using images on slidervalue GUI objects thanks to Tassadar
- Allow using variables and addition and subtraction in variables for easier theming
- Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
- Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
- Other minor fixes and improvements
2.7.2.0
All thanks to @Dees_Troy
- fix crash in setting contexts on datamedia
- fix restoring data partition as f2fs after formatting f2fs
- mount data after being formatted
2.7.1.0
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
2.7.0.1
Fix detecting symlink size in system backup that would cause backups of system to fail
2.7.0.0:
-Faster graphics rendering by disabling alpha blending on fully opaque objects thanks to Tassadar
-Allow sideloading from /tmp on encrypted devices
-Check for a crypto footer before asking for a password to prevent user confusion
-Additional checks for validity to auto generated backup names
-Text wrap in the console output
-Proper caps lock support in the keyboard
-Mouse support via USB OTG for devices with a broken digitizer
-Improve scanning of storage locations for OpenRecoveryScript
-Haptic feedback for buttons, keyboard, and vibration at the end of longer running actions thanks to Samer Diab
-Fixed ext4 wiping when no selinux contexts are defined for that partition (e.g. sd-ext)
-Update SuperSU to 1.93 and improve installation process
-Added selinux contexts restoration to fix permissions
-Load RTC offset on Qualcomm devices to fix the date/time in recovery
-USB Mass Storage fixes Add SELinux support checking
-Add Disk Usage class to better handle excluded folders (e.g. Google Music cache)
-Add 4.4 decrypt support
-Add some toolbox utilities to TWRP (namely to support SELinux functions not supported in busybox)
-Various SELinux fixes and bug fixes
Note: 2.7 marks the first time that we are dropping support for older devices. We are doing this because of the SELinux support needed to install 4.4 Kit Kat ROMs. The non-TWRP parts of the recovery image have to be built in at least a 4.1 tree and the kernel that is included in the recovery image has to support writing SELinux contexts. We don't own most of the devices that we support so we depend on outside testers and developers to help us update devices. In many cases we can't find someone readily. Come to #twrp on Freenode if you want to help bring your device up to date. You can tell right away if your device will support 4.4 ROMs in 2.7. Boot TWRP and press the console button (the square-ish button either in the bottom middle or upper right) to view the console output. If it doesn't say "Full SELinux support" in the console, then your device still needs some work. Help us help you.
2.6.3.10
Fix time in recovery thanks to Tassadar
2.6.3.9
Fix AOSP Decryption of /data
2.6.3.8
Fix setting backlight brightness for hltetmo
2.6.3.7
Fix EFS Backup and Restore
2.6.3.6
Fix USB Storage flags again by adding storage flag
2.6.3.5
Fix USB Storage flags
2.6.3.4
Fix storing SELINUX contexts in backups and restoring them properly
Add fix /data/data SELINUX contexts in Fix Permissions (under Advanced) for applications restoring data without setting contexts correctly
Add EXFAT to kernel
2.6.3.2
Changed to compiled kernel by me
Added LZMA kernel
Removed Root checker SELINUX so we can try to have adb in TWRP
Added EXFAT GPL Kernel Modules
2.6.3.1
Use utkanos compiled kernel to try ADB fixes
Add SELINUX contexts to RAMDISK - thanks to Dees_Troy

FAQ
How do I restore from bootloops?
Please use the following thread to Odin to stock: http://forum.xda-developers.com/showthread.php?t=2465764

Sweet
beamed from transporter room 3

Thanks for doing this and thanks dees_troy

I don't see the Note 3 list as a supported device on the TeamWin site. How do i download it?

mdcarter67 said:
I don't see the Note 3 list as a supported device on the TeamWin site. How do i download it?
Click to expand...
Click to collapse
Its not up yet sorry i have a uncompleted/ not the way they want test version

deeznutz1977 said:
Its not up yet sorry i have a uncompleted/ not the way they want test version
Click to expand...
Click to collapse
So are saying you have a custom recovery on your phone? That would mean the bootloader is not locked, which is great news!

mdcarter67 said:
I don't see the Note 3 list as a supported device on the TeamWin site. How do i download it?
Click to expand...
Click to collapse
OK Guys it's up!

bp328i said:
So are saying you have a custom recovery on your phone? That would mean the bootloader is not locked, which is great news!
Click to expand...
Click to collapse
That's correct. ATT remains to be seen.

bp328i said:
So are saying you have a custom recovery on your phone? That would mean the bootloader is not locked, which is great news!
Click to expand...
Click to collapse
yup rooted and twrp.. so no lock

bigbiff said:
that's correct. Att remains to be seen.
Click to expand...
Click to collapse
deeznutz1977 said:
yup rooted and twrp.. So no lock
Click to expand...
Click to collapse
let the fun begin!!!!!

Backup and restore functioning correctly?
I know international CWM was having issues?

Diablohtr said:
Backup and restore functioning correctly?
I know international CWM was having issues?
Click to expand...
Click to collapse
Let us know. Please pull /tmp/recovery.log if you have issues and paste it at http://paste.tinyw.in.

Omg this is so exciting, I was worried for minute there...
Sent from my SGH-T889 using xda app-developers app

bigbiff said:
OK Guys it's up!
Click to expand...
Click to collapse
Bigbiff should i flash the one in the op.\
\ or is the one from irc ok

deeznutz1977 said:
Bigbiff should i flash the one in the op.\
\ or is the one from irc ok
Click to expand...
Click to collapse
It's the same build afaik.

ok so before this i did cwm recovery. how do i get twrp on it

BACARDILIMON said:
ok so before this i did cwm recovery. how do i get twrp on it
Click to expand...
Click to collapse
Just follow the instructions, it will overwrite CWM

Thanks for the quick recovery!!

Related

[TOOL/UTILITY][TWRP][3.0][RECOVERY] TWRP 3.0.2-0 TeamWin Recovery Project 4/5

[RECOVERY] [4/5/16] TWRP 3.0.2-0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.0.2-0 for the Samsung Galaxy Note 2 (Sprint)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
t0ltespr Device Config: https://github.com/TeamWin/android_device_samsung_t0ltespr
Kernel: https://github.com/bigbiff/android_kernel_samsung_smdk4412
DOWNLOAD:
All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.
http://twrp.me
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers

Changelog
3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.
3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.
3.0.1-0
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
3.0.0.1
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
3.0.0-1
- fix exfat
3.0.0-0
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
2.8.7.0
- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices (xuefer)
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option - more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won't prompt to install SuperSU and TWRP won't try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don't take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
2.8.6.0
- Allow mulitple overlays for popup boxes (Dees_Troy)
- Add pattern style password entry for decrypt (Tassadar)
- Keyboard improvements (_that)
- Update AOSP base to 5.1 (Dees_Troy)
- Reduce theme count to 5 and rely on scaling (Dees_Troy)
- Various scaling improvements (Dees_Troy)
- Improved handling of resources in the GUI (_that)
- Make scroll bar size proportional to list size (_that)
- Allow scoll lists to render without a header (_that)
- Make console scroll per pixel with kinetic scrolling (_that)
- Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
- Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
2.8.5.0
- Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
- Improve thread handling and move input handling into the main rendering thread to improve stability
- Make MTP work even if unplugged and plugged back in
- Unify scrollable list code and make kinetic scrolling feel more natural
- Fix handling of mapped zip files for OTA updates (CM12 updater)
- USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
- Add Cancel Backup capability
- Other small fixes and improvements
2.8.4.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
- Fix some MTP related crashes and bugs
- Eliminate TWRP toggling USB IDs during boot if MTP is enabled
- Fix various adb sideload issues
- Improve threading of actions
- Eliminate separate thread for screen timeout
- Update libblkid to 2.25.0
- Use power button as back button on watch themes for easier navigation
- Add mutex locking to data manager
- Improve custom theme handling on encrypted devices
- Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
2.8.3.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- MTP will now tell the host PC that storage is removed instead of disabling MTP completely
- MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
- Update and improve fix permissions and make fixing contexts optional
- Update SuperSU in TWRP to 2.40 and update install process
- Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
- Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
- Fix kernel panic during MTP start on some devices
- Support unicode fonts on devices with True Type Font support
- Fix slider value not showing sometimes (vibration settings page)
- Toggle MTP off during adb sideload to set correct USB IDs
- Reduce library requirements for 5.0 L decrypt
- Other minor fixes and improvements
2.8.0.0
- Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
- Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
- Add support for color in the console and give error, warning, and highlight lines different colors
- Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
- Improve handling of /misc thanks to mdmower
- Improve setting of time on Qualcomm devices thanks to [NUT]
- Allow using images on slidervalue GUI objects thanks to Tassadar
- Allow using variables and addition and subtraction in variables for easier theming
- Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
- Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
- Other minor fixes and improvements
2.7.1.0
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
2.7.0.0:
-Faster graphics rendering by disabling alpha blending on fully opaque objects thanks to Tassadar
-Allow sideloading from /tmp on encrypted devices
-Check for a crypto footer before asking for a password to prevent user confusion
-Additional checks for validity to auto generated backup names
-Text wrap in the console output
-Proper caps lock support in the keyboard
-Mouse support via USB OTG for devices with a broken digitizer
-Improve scanning of storage locations for OpenRecoveryScript
-Haptic feedback for buttons, keyboard, and vibration at the end of longer running actions thanks to Samer Diab
-Fixed ext4 wiping when no selinux contexts are defined for that partition (e.g. sd-ext)
-Update SuperSU to 1.93 and improve installation process
-Added selinux contexts restoration to fix permissions
-Load RTC offset on Qualcomm devices to fix the date/time in recovery
-USB Mass Storage fixes Add SELinux support checking
-Add Disk Usage class to better handle excluded folders (e.g. Google Music cache)
-Add 4.4 decrypt support
-Add some toolbox utilities to TWRP (namely to support SELinux functions not supported in busybox)
-Various SELinux fixes and bug fixes
Note: 2.7 marks the first time that we are dropping support for older devices. We are doing this because of the SELinux support needed to install 4.4 Kit Kat ROMs. The non-TWRP parts of the recovery image have to be built in at least a 4.1 tree and the kernel that is included in the recovery image has to support writing SELinux contexts. We don't own most of the devices that we support so we depend on outside testers and developers to help us update devices. In many cases we can't find someone readily. Come to #twrp on Freenode if you want to help bring your device up to date. You can tell right away if your device will support 4.4 ROMs in 2.7. Boot TWRP and press the console button (the square-ish button either in the bottom middle or upper right) to view the console output. If it doesn't say "Full SELinux support" in the console, then your device still needs some work. Help us help you.
2.6.3.1
- Add SELINUX Kernel to Flash SELINUX enabled ROMs
- Enable storing SELINUX contexts in the backup for restoring
2.6.3.0
- Proper backup and restore of SELinux contexts (thanks to Tassadar)
- Pull in some ROM information for backup name generation
- Merge all recent patches from AOSP bringing TWRP up to date with Android 4.3
- Add 1200x1920 theme (thanks to Tassadar)
- A few other fixes and tweaks
- Move exfat to GPL kernel module for bugs with exfat-fuse
2.6.1.0
- Initial SELinux support (only a few devices, need testers so come by IRC if your device doesn't have it and needs it)
- Initial support for f2fs file system formatting (Moto X)
- Update SuperSU install for 4.3 ROMs
- Fixed a permissions bug on files created during backup
- Fixed a bug that caused TWRP to not wait for compressed backups to finish causing 0 byte files and md5sums to not match
- Fixed decryption of encrypted data so that both TouchWiz and AOSP decryption are possible
- Ignore lost+found folder during backup and size calculations
- Various other minor bug fixes and tweaks
2.6.0.1
- Fix Data being listed twice in advanced wipe
2.6.0.0
Special Note: If you are running a custom theme, you will likely need to remove that theme before updating to 2.6.0.0 as your custom theme will likely not have some of the new changes visible (e.g. you won't be able to encrypt a backup)!
-Can encrypt a backup to prevent theft of private data from your backup files
- Updated graphics / icon courtesy of shift
- Updated exFAT to latest commits
- Fixed a problem with Samsung TouchWiz decryption
- Update SuperSU binary
- Fixed saving of backup partitions list
- Fixed saving of last used zip install folder
- Fixed backup of datadata on devices that use a separate partition for datadata
- Fixed some issues with the advanced wipe list (android_secure, can now wipe internal storage on data/media deivces and wipe data on the advanced list no longer formats the entire data partition)
- Fixed some problems with partitioning a SD card
- Various other bug fixes and tweaks
Notes about encrypted backups:
Why encrypt your backups? -- Most people store their backups on the device. Any app that has permission to access storage could potentially read your backup files and try to harvest your data. Encrypted backups also provide an added layer of security if you move your backups to other storage devices or to the cloud. The encryption that we're using is probably not strong enough for enterprise level security, but should be strong enough to make it significantly difficult to get to your data.
Encryption is using OpenAES which uses AES 128-bit cbc encryption. If you happen to use a longer password (over 16 characters) then the encryption strength improves to 192 or 256 bits. Do not forget your password. If you forget your password you will be unable to restore your backup. We don't encrypt the entire backup. Encryption is very CPU intensive and can be fairly slow even when we spread the workload over multiple cores even on the latest high-end devices. To ensure that encrypted backups don't take forever, we don't encrypt any other partitions besides /data and in /data we don't encrypt /data/app (or other app related directories where apks are stored) and we don't encrypt dalvik cache.
2.5.0.1
- Fix Encryption
2.5.0.0
- Added scrollable partition lists for mount, backup, restore, wipe, and storage selection
- Add new SliderValue GUI element for selecting brightness and screen timeout (thanks to Tassadar)
- Re-work AOSP and TWRP code to improve license compatibility between GPL and Apache
- Fixed a problem with directory permissions on split archive backups
- Fixed a problem with md5 verification of backups
- Added a search function to libtar (thanks to kokotas)
- Improve handling of XML errors (fix permissions)
- Fixed handling of subpartitions
- Improvements to recovery.fstab flags
- Fixed a problem with decryption not being able to locate the decryption key in some situations
2.4.4.0
- Added another libtar hardlink workaround to fix restore of some backups (usually related to Ubuntu Touch)
- More fixes for the file selector
- Switched from using busybox md5sum to a direct C function call
- Fixed capturing the exit status of tar based backups/restore - TWRP will display that there was an error if there was one again
- Update exFAT to latest commits
- Added a build flag to disable using the ioctl for screen blanking
2.4.3.0
- Fixed 2 bugs related to restore, one dealing with mknod failures (by bigbiff) and one dealing with restoring hardlinks (by Dees_Troy)
NOTE: If your backups weren't restoring correctly in earlier 2.4.x versions they should restore correctly now. Hopefully you didn't delete those backups. If you're still having problems, run the restore, go to advanced and copy log, then give us the log. Complaints without logs will be rightfully ignored.
- Added a scroll bar to file selectors and listboxes courtesy of Tassadar
- Added libblkid for more accurate detection of file systems and can now detect exFAT properly thanks to bigbiff
- Added a screen dim effect 2 seconds before screen off on some devices
- Finally fixed file selector crash (one of the joys of working with multi-threaded software)
- Fixed loading of screen timeout setting during startup
- Improvements and bugfixes to screen timeout code
- Fix Military Time setting persisting
2.4.2.0
- Add screen timeout - screen will turn off automatically after 60 seconds, saves battery and prevents screen burn-in especially on AMOLED devices
- Add a brightness setting (requires device specific setup and only some devices have been added)
- Add a root checker and offer to install SuperSU if the device isn't already rooted
- Add a write buffer to libtar backups, significant improvements to speeds when backing up to exFAT target, minor improvements for other file systems
- Check and offer to fix root permissions if broken
- Add an option for a 24 hour clock display instead of AM/PM (aka military time)
- Move stock recovery reflash check to occur during the reboot cycle
- Add support for some MTK6xxx devices
- Change libtar to vfork to help prevent memory problems
- Add a "clicked" effect to most buttons, file selector, and listbox
- Improve timezone listbox to be more like file selector (per pixel kinetic scrolling, etc)
- Remove some no longer used settings (Forced MD5 sum on zips, size checking on image backups)
- Other minor bugfixes and improvements
2.4.1.0
- Fix detection of exfat and vfat
- Fix formatting vfat past 2GB
2.4.0.1
- Revert to using kernel modules for exFAT for performance

Please see https://twrp.me/FAQ/

Thanks for letting me test this, you guys are great!!

Let the development begin!

THANK YOU!
Thanks for allowing me to test this for you guys last night on irc.
looking forward to big things
can wait for a deodexed stock rom zip to build my jellybomb rom!
AND THANKS TO VIPERBOY AS WELL!

bigbiff said:
Default [RECOVERY] [10/26/12] TWRP 2.3.1.1 - TeamWin Recovery Project
Click to expand...
Click to collapse
Thanks bigbiff and dees_troy!
-viperboy- said:
Thanks for letting me test this, you guys are great!!
Click to expand...
Click to collapse
Thanks foo testing -viperboy-!
I love waking up to the fresh smell of TWRP in the morning!

You guys freaking rock! I'll get this on video ASAP, and add it HERE.

wwjoshdew said:
You guys freaking rock! I'll get this on video ASAP, and add it HERE.
Click to expand...
Click to collapse
I second this. Seriously..phone had only been out for one day and we are already rooted and twrped. Man i wish i knew how to make a rom this is kicking some serious booty
Sent from my SPH-L900 using xda app-developers app

Nice glad to see this here
__________________________________________________
Sent from my SPH-L700-GNEX-using Tapatalk 2

Anon9mouz said:
Nice glad to see this here
__________________________________________________
Sent from my SPH-L700-GNEX-using Tapatalk 2
Click to expand...
Click to collapse
I am sorry for ranting but this is unreal.. Lee's than 24 hours and i just did my first nandroid. Wow.. this is exciting. I guess i need to hook this beast to to my pc and make sure i can copy to and from my phone. Wowowowow
Sent from my SPH-L900 using xda app-developers app

I'm new to Samsung so still working on learning but for now probably going to use GooManager for TWRP install. Is that what most are using to put this on the Note 2 with success? Thanks!
Nevermind just tried it and seems to be good. Thanks for your work!

bhint15 said:
I'm new to Samsung so still working on learning but for now probably going to use GooManager for TWRP install. Is that what most are using to put this on the Note 2 with success? Thanks!
Nevermind just tried it and seems to be good. Thanks for your work!
Click to expand...
Click to collapse
That's really the easiest way to do it.

The whole process had been a piece of cake and there are already custom roms out there.. this is great
Sent from my SPH-L900 using xda app-developers app

SD Card error
Is there an sd card size limit for use in TWRP? I have a 64gb card and it tells me unable to mount external card and i'm unable to select "use external SD" under backup

jutaejrtouch said:
Is there an sd card size limit for use in TWRP? I have a 64gb card and it tells me unable to mount external card and i'm unable to select "use external SD" under backup
Click to expand...
Click to collapse
We currently don't support exfat yet. We are looking into ways we can support it. Dees_Troy saw there are exfat modules in the Samsung kernel for galaxy note 2 so it might be as easy as a recompile and loading modules.

Awesome, great to have a custom recovery again

bigbiff said:
We currently don't support exfat yet. We are looking into ways we can support it. Dees_Troy saw there are exfat modules in the Samsung kernel for galaxy note 2 so it might be as easy as a recompile and loading modules.
Click to expand...
Click to collapse
I also have a 64gb card, should I format to fat32 before rooting or will an exfat work around be coming soon. I'm not knowledgable on which is better, but it came out the pacakge as exfat.
Sent from my Note II

rydehard86 said:
I also have a 64gb card, should I format to fat32 before rooting or will an exfat work around be coming soon. I'm not knowledgable on which is better, but it came out the pacakge as exfat.
Sent from my Note II
Click to expand...
Click to collapse
Once I get my ATT Note2 I will look into exfat. Until then you will need to format it ext4 to get the most benefit. However you will have issues in Android with automount and MTP probably.

Having a little issue with this. Followed directions to do this via goomanager. While in goomanger , settings, open script, then seems to go to download page. states will reboot after. It never reboots just sits there. I then try to reboot through goomanager, nothing. restarted phone and nothing. Manually try to go into recovery and it goes to stock recovery everytime. Any ideas what i am doing wrong. Traveling and just got phone so do not have a laptop. Was trying to do via all phone. Any ideas would be helpful. Thank you

[RECOVERY][L5]TWRP 2.8.7.0 touch recovery

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG for 2.8.5.0:
-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements
CHANGELOG for 2.8.4.0:
-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
DOWNLOAD:
http://d-h.st/KlED - E610
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.

Does it have SELinux support?

Ysfemrhn said:
Does it have SELinux support?
Click to expand...
Click to collapse
yes you can flash any rom tested with cm11

aidasaidas75 said:
yes you can flash any rom tested with cm11
Click to expand...
Click to collapse
Oh, ok. Then it's an awesome work man!

2.8.0.1? Filename says 2.8.0.0. I know not much difference just want to know
Thank you

Is cool! But now I have to learn more about TWRP LOL! ?

Wow cool.
Can you fix tarp for 705 & 700.

Can you fix tarp for 705 & 700.
vaikz said:
Wow cool.
Can you fix tarp for 705 & 700.
Click to expand...
Click to collapse
Can you fix tarp for 705 & 700.
---------- Post added at 09:51 AM ---------- Previous post was at 09:22 AM ----------
who help porting twrp2.8.0.1 for l7p705

cool,great work.

-CALIBAN666- said:
cool,great work.
Click to expand...
Click to collapse
thanks man

thanks aidas
wonderful work!:good:

Yup awesome work using it all time since release no problem

NmAa said:
T.W.R.P. 2.8 for P705/700 please...
Click to expand...
Click to collapse
+1 please.... [emoji1]

Thank you bro It became best for me I hope you will update

Tikiuosi sulaukti ir P700 TWRP versijos. Šaunu jog ir lietuvia kažką daro xda forumuose.
Good work my friend.

version that you have been waiting for
here p700 version of twrp.
https://www.mediafire.com/?j79j3de1rakg8t8

deleted

Thank you bro
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
is it ok to use p700 on p705

NmAa said:
Too bad.. The new build twrp for p700 has worse bug compare to the older version I've used on my p705
its for p700.
Click to expand...
Click to collapse

aidasaidas75 said:
NmAa said:
Too bad.. The new build twrp for p700 has worse bug compare to the older version I've used on my p705
its for p700.
Click to expand...
Click to collapse
Yes its for P700 but they only differ on only one thing, nfc. [emoji3]
We used to work with 700 recovery before and it's no prob using it on our device. We hope someday we will be able to use twrp again.
Click to expand...
Click to collapse

[TOOL/UTILITY][TWRP][3.0][RECOVERY] TWRP 3.0.2-0 TeamWin Recovery Project 4/5

[RECOVERY] [4/5/16] TWRP 3.0.2-0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.0.2-0 for the Samsung Galaxy S6 (Sprint)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
zerofltespr Device Config: TBD
Kernel: TBD
DOWNLOAD:
All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.
http://twrp.me
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers

ADB will not work until Custom kernel is released by Samsung.
Fix Deep Sleep from Chainfire:
http://forum.xda-developers.com/showpost.php?p=60383471&postcount=49

Awesome!
Thank you so much for bringing TWRP to the Sprint version. Flashed via Flashify and everything is working as it should. :good:

boomer8403 said:
Thank you so much for bringing TWRP to the Sprint version. Flashed via Flashify and everything is working as it should. :good:
Click to expand...
Click to collapse
What root method did use?

surge27 said:
What root method did use?
Click to expand...
Click to collapse
T-Mobile version

Does using this cause deep sleep to break?

boomer8403 said:
T-Mobile version
Click to expand...
Click to collapse
And you have no issues? Thought thag was a tmo specific method....

surge27 said:
And you have no issues? Thought thag was a tmo specific method....
Click to expand...
Click to collapse
No issues. I also flashed TWRP without a hitch.

Rooted (t-mobile auto-root) flashed twrp with Flashify as well.
Sent from my SM-G920P using Xparent BlueTapatalk 2

boomer8403 said:
No issues. I also flashed TWRP without a hitch.
Click to expand...
Click to collapse
Can you share the link to the TWRP version you used? I rooted no problem using the T-Mobile root but I was unable to get TWRP to flash with Flashify. When it would reboot into recovery to flash It'd throw an error.
Thanks

IA-32e said:
Can you share the link to the TWRP version you used? I rooted no problem using the T-Mobile root but I was unable to get TWRP to flash with Flashify. When it would reboot into recovery to flash It'd throw an error.
Thanks
Click to expand...
Click to collapse
http://twrp.me/devices/samsunggalaxys6sprint.html

I have galaxy 920x (the demo version) and I tried to flash this via Odin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full room and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app

nflwideout86 said:
http://twrp.me/devices/samsunggalaxys6sprint.html
Click to expand...
Click to collapse
I wasn't able to flash it with Flashify but the TWRP app did the job. Now to wait on custom ROM's...

just and fyi with the customer recovery the Paypal and nnl fingerprint option instead of password does not work.
tested it twice it stops working with twrp and when i flash back stock ocf recovery.img everything works again. not a show stopper but i use that feature
so i figured i would just mention it

cyberone3 said:
just and fyi with the customer recovery the Paypal and nnl fingerprint option instead of password does not work.
tested it twice it stops working with twrp and when i flash back stock ocf recovery.img everything works again. not a show stopper but i use that feature
so i figured i would just mention it
Click to expand...
Click to collapse
Not sure how that checks custom recovery. Does it work with stock recovery with root binaries installed under system?

bigbiff said:
Not sure how that checks custom recovery. Does it work with stock recovery with root binaries installed under system?
Click to expand...
Click to collapse
yes my phone is still rooted but i have stock recovery
i have tested by going back to twrp and after reboot it stops working where it will no longer take my scan but unlock the phone via scan still works just not Paypal access account via scan as soon as i flash back stock recovery once booted it works just fine no other changes and still rooted. by root binaries installed under system i hope you mean root sorry if i am not getting the question fully

I flashed it and now my recovery has a light green hue ? Not exactly sure why this is happening. I've tried several times with the same results.

reesedizan said:
I flashed it and now my recovery has a light green hue ? Not exactly sure why this is happening. I've tried several times with the same results.
Click to expand...
Click to collapse
Flashed which image and what variant do you have? Can you post a camera picture of the screen?

bigbiff said:
Flashed which image and what variant do you have? Can you post a camera picture of the screen?
Click to expand...
Click to collapse
Sprint S6 and TWRP's Sprint version that just came out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[RECOVERY][fugu] TWRP 3.1.1-0 touch recovery [2017-05-19]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
CHANGELOG for 3.0.2-0:
-Backups will now include adopted storage keys (Dees_Troy)
-Fixed an adb restore issue (bigbiff)
-Fixed rebooting when no OS is present (Dees_Troy)
-Fixed line wrapping in the GUI terminal (_that)
-Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)
CHANGELOG for 3.1.0-0:
-vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
-adb backup to stream a backup directly to or from your PC, see documentation here: https://github.com/omnirom/android_bootable_recovery/commit/ce8f83c48d200106ff61ad530c863b15c16949d9 (bigbiff)
-tweak MTP startup routines (mdmower)
-support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
-support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
-better indicate to users that internal storage is not backed up (Dees_Troy)
-improve automatic determination of TW_THEME (mdmower)
-minimal getcap and setcap support (_that)
-try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
-shut off backlight with power key (mdmower)
-timeout during FDE decrypt (Dees_Troy and nkk71)
-support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
-boot slot support (Dees_Troy)
-TWRP app install prompt during reboot (Dees_Troy)
-support for AB OTA zips (Dees_Troy)
-support new Android 7.x log command (Dees_Troy)
-update recovery sources to AOSP 7.1 (Dees_Troy)
-numerous bugfixes and improvements by too many people to mention
CHANGELOG for 3.0.2-0:
-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
CHANGELOG for 3.0.1-0:
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
CHANGELOG for 3.0.0-0:
-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
DOWNLOAD:
1) Install the TWRP app from the Play Store or grab the apk from our website
2) Open the app, agree to the terms, and enable root access
3) Select TWRP Flash
4) Search for your device and select the version you wish to download
5) Once the download is complete, select the file (it's usually in your downloads folder) and then Flash Recovery
OR:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR:
You can find more information and download links on our website.
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.

Note, you will need a USB OTG cable and a USB mouse to use the interface. If you don't have these, you can use TWRP via the command line.
Current and past versions
Device page with instructions for a manual install

Thanks for making this great recovery available for the Nexus Player! I look forward to trying it out. I figure it also supports Nandroid backups like TWRP does on other devices?

Thx for making TWRP available for the Nexus Player!
Works fine for me.

Thank you, Thank you, Thank you, Thank you Dees_Troy

I am pushing on my TV but it's not working. What I am I doing wrong?
Com on, you know that is going to come up.

@WugFresh

Works pefrectly! Rooted with the NRT root files and manually flashing!

ikslawlok said:

Click to expand...
Click to collapse
How do you move around in the menu?

O0cynix0o said:
How do you move around in the menu?
Click to expand...
Click to collapse
I believe post #2 says you need a USB OTG cable and mouse to move around. Otherwise use the command line version. Can't wait till my cables and hub come in so I can try this out!

Does this pickup a wireless USB mouse? Or is a wired connection required?

Cuzz1369 said:
Does this pickup a wireless USB mouse? Or is a wired connection required?
Click to expand...
Click to collapse
I tried both wireless and bTooth neither work. Post #2 say to use wired KB and Mouse.

In case anyone was wondering, Minix Neo A2 works wirelessly with TWRP as a wireless mouse (a bit choppy, but works).

O0cynix0o said:
How do you move around in the menu?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60889354&postcount=2

Flashed but I'm stuck in the boot up animation. Any suggestions?

Dees_Troy said:
If you don't have these, you can use TWRP via the command line.
Click to expand...
Click to collapse
How? I cant find any documentation on this, I would love to enable sideload without buying a cable....

Is a backup only possible to internal memory ?
Can't figure out how to mount the usb-stick for external backup.

Hello @Dees_Troy
Is there any key combination to take screenshot ?
I am able to take some screenshots with adb command and ffmpeg.
But this is not working in all section of TWRP
Code:
adb pull /dev/graphics/fb0 "/media/AndroidK/Nexus Player/TWRP/Captures/_002_" && cd "/home/kowalski/.android/screenshot/ffmpeg-git-20150525-64bit-static/" && ./ffmpeg -vcodec rawvideo -f rawvideo -pix_fmt bgra -s 1920x1080 -i "/media/AndroidK/Nexus Player/TWRP/Captures/_002_" -vframes 1 -f image2 -vcodec png "/media/AndroidK/Nexus Player/TWRP/Captures/_002_grand.png"
Thank you in advance

We need to get this added to the Nexus Root Toolkit. Someone notify wugfresh!

[RECOVERY][OFFICIAL] TWRP for Xiaomi Mi 5

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
CHANGELOG for 3.3.1-0:
- Fix selinux issues during formatting - dianlujitao
- Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
- Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
- Add option to uninstall TWRP app from /system - Dees_Troy
- Create digest for subpartitions - bigbiff
CHANGELOG for 3.3.0-0:
- Merge AOSP 9.0 r3 (Dees_Troy)
- Use ANDROID_ROOT variable instead of hard coding to /system (CaptainThrowback)
- Decrypt FBE on 9.0 and metadata decrypt (Dees_Troy)
- vold decrypt updates (CaptainThrowback and nijel8)
- Support vibration on LED class devices (notsyncing)
- Metadata decrypt support for Pixel 3 (Dees_Troy)
- Support rotating the display via build flag (vladimiroltean)
- Reboot to EDL mode button (mauronofrio)
- Support MTP on FFS devices (bigbiff)
- Update FDE decrypt to support keymaster 3 and 4 (Dees_Troy)
- Detect mkfs.f2fs version to properly format on f2fs partitions (Dees_Troy)
- Allow TWRP to use md5 and sha256 checksums for zip installs (bigbiff)
- TWRP can use /data/cache/recovery and /persist/cache/recovery on AB devices with no cache partition (bigbiff)
- Switch part of advanced menus in TWRP to use a listbox of options (Dees_Troy)
- Use magiskboot to allow repacking boot images for installing TWRP (Dees_Troy with thanks to topjohnwu of course)
CHANGELOG for 3.2.3-0:
- Fix automatic installing of OTA zips on encrypted devices
- Remove SuperSU from TWRP
- Support both md5 and md5sum file extensions when doing MD5 checking for zip files
CHANGELOG for 3.2.2-0:
- adb backup fixes
- OTA style update zips will now install automatically without prompting for decrypt
- minor tweaks to handling date/time on Qualcomm devices
- updates to some language translations
CHANGELOG for 3.2.1-0:
- minui fixes (cryptomilk)
- Better android-8.0 compatibility in ROM trees (Dees_Troy)
- Fix missing library in android-8.0 (nkk71)
- Fix inconsistent SDCard naming (DevUt)
- Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
CHANGELOG for 3.2.0-0:
- Allow restoring adb backups in the TWRP GUI (bigbiff)
- Fix gzip backup error in adb backups (bigbiff)
- Fix a bug in TWRP's backup routines that occasionally corrupted backup files (nkk71)
- Better support for installing Android 8.0 based zips due to legacy props (nkk71)
- Support vold decrypt with keymaster 3.0 in 8.0 firmwares (nkk71)
- Decrypt of synthetic passwords for Pixel 2 (Dees_Troy)
- Support newer ext4 FBE policies for backup and restore in libtar (Dees_Troy)
- v2 fstab support (Dees_Troy)
- Bring TWRP forward to android 8.0 AOSP base (Dees_Troy)
- Various other minor bugfixes and tweaks
CHANGELOG for 3.1.1-0:
-Backups will now include adopted storage keys (Dees_Troy)
-Fixed an adb restore issue (bigbiff)
-Fixed rebooting when no OS is present (Dees_Troy)
-Fixed line wrapping in the GUI terminal (_that)
-Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)
CHANGELOG for 3.1.0-0:
-vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
-adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
-tweak MTP startup routines (mdmower)
-support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
-support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
-better indicate to users that internal storage is not backed up (Dees_Troy)
-improve automatic determination of TW_THEME (mdmower)
-minimal getcap and setcap support (_that)
-try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
-shut off backlight with power key (mdmower)
-timeout during FDE decrypt (Dees_Troy and nkk71)
-support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
-boot slot support (Dees_Troy)
-TWRP app install prompt during reboot (Dees_Troy)
-support for AB OTA zips (Dees_Troy)
-support new Android 7.x log command (Dees_Troy)
-update recovery sources to AOSP 7.1 (Dees_Troy)
-numerous bugfixes and improvements by too many people to mention
CHANGELOG for 3.0.2-0:
-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
CHANGELOG for 3.0.1-0:
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
CHANGELOG for 3.0.0-0:
-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
DOWNLOAD LINKS:
Current and past versions of TWRP can be found at one of the mirrors below:
- Primary (Recommended)
- Primary (Backup)
INSTALL INSTRUCTIONS:
TWRP install (requires TWRP 2.8.4 or higher already installed):
1) Download the latest version of TWRP appropriate for your device/firmware
2) Reboot to TWRP
3) Hit Install and tap the "Install Image" button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR:
You can find other alternative installation methods on our website (direct link to your device)!
BUGS:
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log to SD, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed.
If your issue is determined to be a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
TWRP for Xiaomi Mi 5, Device Specific App for the Xiaomi Mi 5
Contributors
bgcngm
Version Information
Status: Stable
Created 2016-07-06
Last Updated 2018-07-04

Reserved
*** MAINTENANCE RELEASES CHANGELOG ***
CHANGELOG for 3.2.1-1:
- Update to O-mr1 based kernel (brings the latest F2FS updates as well as support for quota feature)
- Add support for pseudo-vendor partition (/cust is now mounted as /vendor)
CHANGELOG for 3.1.0-1:
- Update to N based kernel (built with minimal defconfig, brings updated F2FS support)
- Fix decryption for N
- Add additional EFS partitions for backup/restore
CHANGELOG for 3.0.2-3:
- Fix EFS backup/restore
- Add NTFS support
CHANGELOG for 3.0.2-2:
- Exclude built-in SuperSU (device ships with M)
- Add F2FS support
- Update prebuilt kernel to source-built version (brings fully working touch for all hardware variants and support for every firmware)
- Add system image and EFS backup/restore feature
- Include extra languages
- Removed hbtp input device (no mouse arrow shown on recovery screen)
CHANGELOG for 3.0.2-1:
- Set default brightness
- Fix USB OTG
CHANGELOG for 3.0.2-0:
- First release for Xiaomi Mi 5 (gemini)

*** UNOFFICIAL TEST/PREVIEW RELEASES (INCLUDING CHANGELOG) ***
CHANGELOG for 3.0.3-0:
- Built with android-7.1 tree
- Fixed compatibility with systemless SuperSU flashing on F2FS (thanks to @arter97 for the great finding)
- Updated to the latest N crypto libs (backward compatibility with M preserved)

Link is dead
Edit: link is ok

Hello,
Does OTG work?
Enviado desde mi MI 5 mediante Tapatalk

jobrima said:
Hello,
Does OTG work?
Enviado desde mi MI 5 mediante Tapatalk
Click to expand...
Click to collapse
No it is not. You can't mount it.

Does anyone know how to get around the freeze issue... Once the recovery has been installed via adb it's fine.. However when I come back to rebooting into recovery it's stuck after TWRP screen... Really annoying as I have to flash recovery for every time I need to install a new zip or rom

Ry2mkk said:
Does anyone know how to get around the freeze issue... Once the recovery has been installed via adb it's fine.. However when I come back to rebooting into recovery it's stuck after TWRP screen... Really annoying as I have to flash recovery for every time I need to install a new zip or rom
Click to expand...
Click to collapse
Try with charger connected.
Sent from my MI 5 using XDA-Developers mobile app

sdujolo said:
Try with charger connected.
Click to expand...
Click to collapse
Used Flashify TWRP from the apps download... Works perfectly now
Thanks anyway :good:

It still needs the modified boot.img?

Ry2mkk said:
Does anyone know how to get around the freeze issue... Once the recovery has been installed via adb it's fine.. However when I come back to rebooting into recovery it's stuck after TWRP screen... Really annoying as I have to flash recovery for every time I need to install a new zip or rom
Click to expand...
Click to collapse
Same Problem here... sometimes you can use it after you leave it after the screen goes black, but that more like a lucky game... it does not work everytime.

For your info, this was fully tested with 6.6.23 firmware.
Sent from my MI 5 using Tapatalk

bgcngm said:
For your info, this was fully tested with 6.6.23 firmware.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
And sorry sir, otg was working? I can't tick the box to mount it.
Inviato dal mio MI 5 utilizzando Tapatalk

I must be missing something... Why isn't it saving my settings? Everytime I boot into TWRP it seems brand new. I didn't check the box at the start either.

bgcngm said:
For your info, this was fully tested with 6.6.23 firmware.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
I tried it on MIUI 8: 6.6.30 China
The previous TWRP I had was not able to do an adb-sideload proper after setting up the device (encryption active, maybe?, dunno, not bothered to double check).
Your official TWRP allowed me to flash SuperSU after setting up the device (couldn't do this before).
A thousand thanks for your work.

Hi,
Anyone else having the same issue whereby TWRP can't seem to mount a USB stick/thumbdrive attached via an OtG cable?

reb00tz said:
Hi,
Anyone else having the same issue whereby TWRP can't seem to mount a USB stick/thumbdrive attached via an OtG cable?
Click to expand...
Click to collapse
read through the comments, people on the first page got an answer to this question.

I flashed this TWRP over the unofficial one I was using until now, and I still get a mouse cursor in the center of the screen. Is that normal?

SavageDamage said:
I flashed this TWRP over the unofficial one I was using until now, and I still get a mouse cursor in the center of the screen. Is that normal?
Click to expand...
Click to collapse
Yes, that's normal because the kernel source code wasn't yet released and therefore I can't remove the pointer until then.

bgcngm said:
Yes, that's normal because the kernel source code wasn't yet released and therefore I can't remove the pointer until then.
Click to expand...
Click to collapse
There is that Chinese Cm13 something kernel, do you know something about it on what it's based is it open source?

Develop Bugs

welcome