Develop Bugs

Help phone stuck at boot screen

Hello. I just tried to unlock the bootloader on on Verizon Galaxy nexus. Now it's stuck at the bootscreen with the lock image. I did a search and couldn't find a exact answer for my issue. I hope I haven't bricked my phone. Anyway, any help would be appreciated.
I wasn't trying to root just unlock the bootloader. It appeared everything went ok but, now I'm stuck. I used the same method for unlocking the bootloader on my GSM G-nex and it worked.
I know I've done something wrong or this may be something simple. I just need help so I can use my phone.

are you able to boot into the bootloader? if so you should be able to recover and can't worry a little less.

same thing here... I posted a request for a LTE boot.img since can still get into the bootloader

Goat_For_Sale said:
are you able to boot into the bootloader? if so you should be able to recover and can't worry a little less.
Click to expand...
Click to collapse
No I don't believe I can. When I type fastboot it just says "waiting on device" I can hold the volume down & power buttons and get to the screen were it says "start" at the top and below that "downloding"

Yea, that was what I was eluding too, The device just came out and google released the GSM image. I am sure that it will appear online in the near future.
if you are able to get into the bootloader does it say that its unlocked ? is your google splash screen showing the unlocked padlock ? you could also try fastboot flash recovery to get cwm on there and provide additional potential solutions.
---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------
qnet said:
No I don't believe I can. When I type fastboot it just says "waiting on device" I can hold the volume down & power buttons and get to the screen were it says "start" at the top and below that "downloding"
Click to expand...
Click to collapse
That is download mode used for odin.
hold BOTH volumn buttons and power to get into the bootloader/fastboot

Goat_For_Sale said:
Yea, that was what I was eluding too, The device just came out and google released the GSM image. I am sure that it will appear online in the near future.
if you are able to get into the bootloader does it say that its unlocked ? is your google splash screen showing the unlocked padlock ? you could also try fastboot flash recovery to get cwm on there and provide additional potential solutions.
---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------
That is download mode used for odin.
hold BOTH volumn buttons and power to get into the bootloader/fastboot
Click to expand...
Click to collapse
Yeah, when I did the procedure it said that it was unlocked. Everything looked ok , it booted show the unlock symbol under Google. It then went to the colorful animation and was stuck there. At that time I pulled the battery and, it's been stuck at the screen showing google and the unlock image.

qnet said:
Yeah, when I did the procedure it said that it was unlocked. Everything looked ok , it booted show the unlock symbol under Google. It then went to the colorful animation and was stuck there. At that time I pulled the battery and, it's been stuck at the screen showing google and the unlock image.
Click to expand...
Click to collapse
you should have let the animation run for like 10 minutes the phone has to rebuild the first boot can take like 15 minutes sometimes.
try booting into the bootloader see if that works still

Sorry I wasn't paying attention and didn't read the part were you told me how to get to the fastboot screen. I'm there now. Can I just relock or fix the bootloader from problem there? It shows it unlocked at the fastboot screen.

qnet said:
Sorry I wasn't paying attention and didn't read the part were you told me how to get to the fastboot screen. I'm there now. Can I just relock or fix the bootloader from problem there? It shows it unlocked at the fastboot screen.
Click to expand...
Click to collapse
you could try fastboot oem lock and see if that works but if the phone wasn't booting i don't know if that will fix it but worth a shot.
try it out and see. it shouldn't do any harm to try

I had the issue with the failure to boot up after doing the fastboot oem unlock (I had to use the pda net drivers to get my device recognized to get even that far). I did a lot of things like pulling the battery, locking again and then unlocking and nothing worked until I went here http://rootzwiki.com/topic/11732-galaxy-nexus-root-procedure-adb-method/, then downloaded the files following their directions and doing the fastboot boot boot.img command. It took a LONG time to boot up, but it did boot finally.

GirLuvsDroid said:
I had the issue with the failure to boot up after doing the fastboot oem unlock (I had to use the pda net drivers to get my device recognized to get even that far). I did a lot of things like pulling the battery, locking again and then unlocking and nothing worked until I went here http://rootzwiki.com/topic/11732-galaxy-nexus-root-procedure-adb-method/, then downloaded the files following their directions and doing the fastboot boot boot.img command. It took a LONG time to boot up, but it did boot finally.
Click to expand...
Click to collapse
Thank you, I'll try that.

I have another question. One of the selections on the fastboot screen is recovery mode. Can I try that or is this something were you have to have a rom stored on a sd-card?

qnet said:
I have another question. One of the selections on the fastboot screen is recovery mode. Can I try that or is this something were you have to have a rom stored on a sd-card?
Click to expand...
Click to collapse
you could download the recovery image from
http://forum.xda-developers.com/showthread.php?t=1392336
then when connected in fast boot flash it with
fastboot flash recovery recovery.img
(rename the file from the linked thread to recovery.img)
this should write your custom recovery partition.
once you have that though you are still not going to be able to boot but it would allow you to flash a nandroid backup if someone made one for you or a LTE based rom
EDIT: you could also try a factory data reset and wipe dalvk cache from withing cwm. that may fix your boot problem

I had this problem, too.
I downloaded Clockwork Recovery and used 'fastboot boot LTErecovery_cwr.img' to boot into it, I wiped data and cache / factory reset and then rebooted. It rebooted twice, but after ten minutes or so I was back to the ICS Welcome screen. All of the files I'd put on my internal storage were wiped (during the oem unlock, I assume) but I'm in the stock rom but Superuser was installed and I have root access.
Hope it helps.
EDIT: looks like this is the same thing Goat_For_Sale posted above, but his command flashes CWM where mine temporarily boots into it. Since most of us will be installing CWM anyway I'd recommend using his command instead.

mixedlemon said:
I had this problem, too.
I downloaded Clockwork Recovery and used 'fastboot boot LTErecovery_cwr.img' to boot into it, I wiped data and cache / factory reset and then rebooted. It rebooted twice, but after ten minutes or so I was back to the ICS Welcome screen.
Hope it helps.
Click to expand...
Click to collapse
where did you get the lterecovery_cwr.img ? could you link to it please

I linked to the thread in my post, but here's a link to the mediafire upload from that thread: http://www.mediafire.com/?mdf0mtacskob5yg

mixedlemon said:
I linked to the thread in my post, but here's a link to the mediafire upload from that thread: http://www.mediafire.com/?mdf0mtacskob5yg
Click to expand...
Click to collapse
Thanks, my bad I didn't realize you were refering to the recovery image, thought it was the boot image for the LTE device.

Goat_For_Sale said:
Thanks, my bad I didn't realize you were refering to the recovery image, thought it was the boot image for the LTE device.
Click to expand...
Click to collapse
Ahh no problem.
I got pretty worried for a second that I'd already broke my shiny new Nexus, so I'm really hoping I can help out someone else that had the same problem.

Solved
I believe it's fixed now. I use the method that GirLuvsDroid posted from the Rootzwiki forum. Once it rebooted, I stopped there and didn't root the phone. I was just happy to get it booted.
It's downloading all my apps and settings now. Thanks to everyone who tried to help me, I really appreciate. This was a good learning experience for me.

qnet said:
I believe it's fixed now. I use the method that GirLuvsDroid posted from the Rootzwiki forum. Once it rebooted, I stopped there and didn't root the phone. I was just happy to get it booted.
It's downloading all my apps and settings now. Thanks to everyone who tried to help me, I really appreciate. This was a good learning experience for me.
Click to expand...
Click to collapse
So you were just able to go through the Rootzwiki method? Were you stuck at "Downloading...Do not turn off target !!" screen when you went to boot screen originally? My device still can't be detected :/

[Q] Nexus 7 suddenly bricked ?

Hello all, so yesterday I went on my tablet (Nexus 7 2013 WIFI ver.) and browsed the net a bit and went to sleep. I recall having around 30% battery power. This morning I wake up to an apparently flat battery (power button didn't turn on anything) so I just plugged it in and did something else. After a while, I took my tablet and started it with the power button. However, it got stuck on the Google logo and never fired up anything. I've rooted the tablet quite some time ago (months) so the cause is not from there.
Things I haven't recently done:
Installing an app.
Rooting or flashing anything.
Updating an app.
Things I have tried doing to fix the problem:
Booting into FASTBOOT then trying the recovery mode = still stuck on the Google logo.
Booting a custom recovery image using Wug's toolkit = frozen at the team logo (TWRP) / black screen (CWM).
Flash Stock + Unroot (Soft-Bricked/Bootloop) = FAILED (flash write failure).
So now I'm really stuck and desperate to make the device work again. I've been reading all day long and trying all sorts of solutions to no avail. And it seems far-fetched to me for a device like this to just instantly brick itself without any reason at all.
Can anyone help me with this case ? Or does anyone has any idea what just happened to my tablet ? :crying:
EDIT: I'm afraid that warranty might not work as the device was unlocked and rooted so it's the last solution for me.

Bumpity bump
No one has any idea what happened to the tablet and how to fix it ? I've tried doing some more flashing but to no avail. It just refuses to flash and keeps failing to write the files.

I think you need to leave out on the charger for 1/2hr without doing anything with it. You are probably using what little power it has charged by trying to reboot it, etc.
I had to do that once and it did the trick.
Sent from my Nexus 7 using XDA Free mobile app

There is no reason you should not be able to get in to recovery (power and volume down).
You could call Motorola. They have good tech support.

The exact same thing happened to me. I rooted it months ago and haven't changed a thing since then. It just froze up a few days ago. I restarted and it just gets stuck on the google screen. I can get into the bootloader, but when I try to go to recovery, the google screen comes up and won't go away. I've tried every method I can find for flashing the stock image and absolutely nothing is working. I just get stuck on the google screen.
Please update this if you find a solution!

Do u guys have the most up to date version of whatever particular recovery that you're on?

Yep. I've flashed the stock recovery multiple times to no avail. :/

nexusjas said:
Yep. I've flashed the stock recovery multiple times to no avail. :/
Click to expand...
Click to collapse
If you can't get into recovery or flash any images it sounds to me like a hardware failure. Bad memory maybe? If you've tried everything then RMA to Asus before the one year warranty runs out.
Have you tried to see if your computer sees your N7 by typing fastboot devices if you have the sdk installed?

wantabe said:
If you can't get into recovery or flash any images it sounds to me like a hardware failure. Bad memory maybe? If you've tried everything then RMA to Asus before the one year warranty runs out.
Click to expand...
Click to collapse
Not what I wanted to hear, but you're probably right. Thanks :/

nexusjas said:
Not what I wanted to hear, but you're probably right. Thanks :/
Click to expand...
Click to collapse
I was to slow with my update. Does your computer see your N7 with fastboot?

wantabe said:
I was to slow with my update. Does your computer see your N7 with fastboot?
Click to expand...
Click to collapse
Yes, I can get into the bootloader just fine and I can use fastboot. I go through the flashing process and the command prompt says everything flashed successfully, but when I restart the device, it hangs on the google logo. The same thing happens when I try to boot into recovery.

nexusjas said:
Yes, I can get into the bootloader just fine and I can use fastboot. I go through the flashing process and the command prompt says everything flashed successfully, but when I restart the device, it hangs on the google logo. The same thing happens when I try to boot into recovery.
Click to expand...
Click to collapse
If you fastboot flashed the factory image and can't boot up then it sounds like a hardware problem. Out of ideas, sorry.

wantabe said:
If you fastboot flashed the factory image and can't boot up then it sounds like a hardware problem. Out of ideas, sorry.
Click to expand...
Click to collapse
I'm not sure what happened, but I just ran this little utility again (I've done it many times over the last week or so to no avail) and it actually worked. Hopefully it keeps working!
Thanks for your help!

Have a bricked kindle , stuck in fastboot mode - tried all-Please Help

I have a bricked kindle (8.9). i have followed ALL guide but still get red screen and then fast boot screen.
i have pushed boot and recovery and still get the same . i used first aid package and kfhd, but still boot to fastboot screen.
I would appropriate any help or guidance.

gs4n said:
I have a bricked kindle (8.9). i have followed ALL guide but still get red screen and then fast boot screen.
i have pushed boot and recovery and still get the same . i used first aid package and kfhd, but still boot to fastboot screen.
I would appropriate any help or guidance.
Click to expand...
Click to collapse
you ever get this straight? i had the very same issue and after several DAYS of reading/flashing/swearing i finally got it straight back to factory, let me know if you still need help and i will try to find the thread that ultimately helped me bring mine back to life
Thanks
Mike

11fan said:
you ever get this straight? i had the very same issue and after several DAYS of reading/flashing/swearing i finally got it straight back to factory, let me know if you still need help and i will try to find the thread that ultimately helped me bring mine back to life
Thanks
Mike
Click to expand...
Click to collapse
Hi,
i am still down. how did you get it to boot up. ? How did you fix it ? Mine is completely blank now. Thanks,

OK..let me find the thread that should get u going..I have it bookmarked on my PC but using mobile ATM, I will try to find it

this here should get you going! just follow EXACTLY! (with the exception of using KFFirstAide) just use regular command prompt run as admin) probably will not have to go past 8 in most cases, usually after you flash that recovery image and erase cache and user data it will reboot in it's OWN recovery on next reboot, and also when erasing user data, it could take up to 45 mins maybe depending on how long you had been using it before it got corrupted so don't panic when it sits there forever after you issue erase user data command. IF it reboots back into it's own recovery it will give you two options on the Kindle screen to either boot into OS or RESET to factory, in my experience I would definitely choose to RESET TO FACTORY DEFAULTS, but thats your choice, and if you need help I will try to walk you through it on some type of IM or google hangout or something. keep me posted as im curious to here the outcome. I know this has fixed two Kindles with the same problem as yours http://forum.xda-developers.com/showpost.php?p=37278819&postcount=193

can you still access fastboot?
my KFHD 8.9 was stuck in fastboot mode also a few days ago (http://forum.xda-developers.com/kin...lp/help-stuck-kindlefire-boot-screen-t2971768), and @11fan helped me. (Thanks a lot!). That thread that he posted was the one that helped me revive my kindle. I also tried the KFHD SRT where i tried the option to restore with the SU app. I actually didnt know if that helped but when i was finally able to get my kindle going, it was on version 8.1.4 (i was on 8.5.1 before). Then i used that thread, the thing is, it took me 37 minutes to erase the userdata (as was mentioned by @11fan), and when i rebooted to system, i didnt go the restore factory settings (probably because i erased all the userdata already).
I hope you get to fix your kindle. i know the feeling of being in that situation.

? ?. ? ?

Help! - stuck in "kindlefire" boot screen

Hi!
I have a kindle fire hd 8.9 running the 8.5.1 version.
I managed to root it using the key root master app (i think it was an indonesian/chinese language, which was suggested by one poster), although it was kinda weird because it didn't install the superuser app. Then, i tried to install the 2nd bootloader and twrp using the fireflash app from this thread http://forum.xda-developers.com/showthread.php?t=2277105. But somehow, i couldn't get it to fastboot mode, although it wasn't needed according to that thread. I flashed it using the fireflash app, however, i couldnt get it to go to the TWRP recovery. Then, i noticed that there was an option to go into recovery from the fireflash app, which i pressed, and now, i'm stuck in the bootscreen showing the kindlefire logo. i could turn it on and off, but that's it.
sorry, im quite a relatively newbie at this. from what i've searched, maybe the KFHD srt tools can help with this. Will it work even if i cannot go into fastboot mode?
Thank you. any help would be greatly appreciated!

notiboy07 said:
Hi!
I have a kindle fire hd 8.9 running the 8.5.1 version.
I managed to root it using the key root master app (i think it was an indonesian/chinese language, which was suggested by one poster), although it was kinda weird because it didn't install the superuser app. Then, i tried to install the 2nd bootloader and twrp using the fireflash app from this thread http://forum.xda-developers.com/showthread.php?t=2277105. But somehow, i couldn't get it to fastboot mode, although it wasn't needed according to that thread. I flashed it using the fireflash app, however, i couldnt get it to go to the TWRP recovery. Then, i noticed that there was an option to go into recovery from the fireflash app, which i pressed, and now, i'm stuck in the bootscreen showing the kindlefire logo. i could turn it on and off, but that's it.
sorry, im quite a relatively newbie at this. from what i've searched, maybe the KFHD srt tools can help with this. Will it work even if i cannot go into fastboot mode?
Thank you. any help would be greatly appreciated!
Click to expand...
Click to collapse
hopefully you backed up all images first? i made that same mistake with fireflash to "boot into recovery" yep booted mine right into a brick, after several different types of "softbricks" i finally got mine back straight and now kinda scared to try the 2nd bootloader OP again, because idk which bootloader i am on right now and cant find a way to identify it! i will try to find the thread that got me back straight, give me a while
Mike

11fan said:
hopefully you backed up all images first? i made that same mistake with fireflash to "boot into recovery" yep booted mine right into a brick, after several different types of "softbricks" i finally got mine back straight and now kinda scared to try the 2nd bootloader OP again, because idk which bootloader i am on right now and cant find a way to identify it! i will try to find the thread that got me back straight, give me a while
Mike
Click to expand...
Click to collapse
Thanks @Mike. It kinda reassuring to know that somehow you were able to fix your kindle. BUT i have a big problem, i was not able to back up the images (i wasnt able to go into fastboot, i think my windows 8 pc has a problem with that, or is it just me?). is it possible to use your images? (we're both 8.5.1).
Thanks again mike. I think i'll be scared to try the 2nd bootloader again too.

notiboy07 said:
Thanks @Mike. It kinda reassuring to know that somehow you were able to fix your kindle. BUT i have a big problem, i was not able to back up the images (i wasnt able to go into fastboot, i think my windows 8 pc has a problem with that, or is it just me?). is it possible to use your images? (we're both 8.5.1).
Thanks again mike. I think i'll be scared to try the 2nd bootloader again too.
Click to expand...
Click to collapse
First off you have got to get adb and fastbook working, if not you will probably never get it back useable. have you installed android sdk? if not go here >http://developer.android.com/sdk/index.html#Other< and download the android-sdk windows zip file and install, that should get your drivers going so you can access adb and fastboot. for help installing the sdk manager go here >http://developer.android.com/tools/help/sdk-manager.html< after sdk manager install check your C:/users/yournamehere/ folder and make sure it put a .android folder there (sometimes it don't) and it should be a file in there called android_usb.ini, if that don't get you hooked up to adb and fastboot (assuming you know how to check if adb and fastboot is working correctly) install the Kindle driver package found here >https://www.dropbox.com/s/c0w3po7r65fwltb/Kindle%20Fire%20HD%208.9%20ADB%20drivers.zip< and if STILL you can't get adb and fastboot working i will help you edit that android_usb.ini file(what i ultimately had to do to cure my fastboot woes on this windows 7 box) that i mentioned earlier in this post. once you get adb and fastboot working correctly i will try to help you get your KFHD back up. keep me posted and i will check back as regular as i can! GOOD LUCK!
Mike
edit: windows 8 driver problems/errors go here >http://forum.xda-developers.com/showthread.php?t=2093296<

!
11fan said:
First off you have got to get adb and fastbook working, if not you will probably never get it back useable. have you installed android sdk? if not go here >http://developer.android.com/sdk/index.html#Other< and download the android-sdk windows zip file and install, that should get your drivers going so you can access adb and fastboot. for help installing the sdk manager go here >http://developer.android.com/tools/help/sdk-manager.html< after sdk manager install check your C:/users/yournamehere/ folder and make sure it put a .android folder there (sometimes it don't) and it should be a file in there called android_usb.ini, if that don't get you hooked up to adb and fastboot (assuming you know how to check if adb and fastboot is working correctly) install the Kindle driver package found here >https://www.dropbox.com/s/c0w3po7r65fwltb/Kindle%20Fire%20HD%208.9%20ADB%20drivers.zip< and if STILL you can't get adb and fastboot working i will help you edit that android_usb.ini file(what i ultimately had to do to cure my fastboot woes on this windows 7 box) that i mentioned earlier in this post. once you get adb and fastboot working correctly i will try to help you get your KFHD back up. keep me posted and i will check back as regular as i can! GOOD LUCK!
Mike
edit: windows 8 driver problems/errors go here >http://forum.xda-developers.com/showthread.php?t=2093296<
Click to expand...
Click to collapse
@11fan - thank you so much!
Anyway, i was able to go into fastboot, yahoo! i was able to see that Jem-PVT-Prod-04 on the command prompt. (i used my windows 7 laptop, i dont know why i couldnt get it to go into fastboot while in win8). i'm beginning to have some hope now.
Thank you!

notiboy07 said:
@11fan - thank you so much!
Anyway, i was able to go into fastboot, yahoo! i was able to see that Jem-PVT-Prod-04 on the command prompt. (i used my windows 7 laptop, i dont know why i couldnt get it to go into fastboot while in win8). i'm beginning to have some hope now.
Thank you!
Click to expand...
Click to collapse
thats good news! adb and fastboot working now? i hope i helped in some kind of way! you can surely get it back straight now! and btw if you were successful in installing that 8.1.4 bootloader when it messed up, IT DONT GO AWAY! i flashed mine twice with MY factory backup images and still retained the 8.1.4 bootloader from Hashcodes OP. and retained root! anyway im so stubborn and determined to figure things out like this, i decided to try again only after i figured out i still had the 8.1.4 bootloader, and THE ONLY way i could figure out which boot loader i had was to load up fireflash again and see if it give me the RED WARNING in the first line about flashing or not flashing the 8.1.4, sure enough it showed no warning with 8.1.4 bootloader! SO instead of using fireflash i just used fastboot to apply the "stack override script" and flashed the freedom boot 8.4.6 image and the 2.7.0.0 TWRP and went smooth as butter, booted up in TWRP recovery and then rebooted several times to make sure all was good and then last boot in recovery i did a wipe with TWRP and installed CM11 and GAPPS zip and all has been good every since! :laugh: it really is a whole new tablet with CM11! :good: if you need more help i will do my best, trust me i know what it feels like to have the RED SCREEN and stuck in fastboot! keep me posted!
Mike

11fan said:
thats good news! adb and fastboot working now? i hope i helped in some kind of way! you can surely get it back straight now! and btw if you were successful in installing that 8.1.4 bootloader when it messed up, IT DONT GO AWAY! i flashed mine twice with MY factory backup images and still retained the 8.1.4 bootloader from Hashcodes OP. and retained root! anyway im so stubborn and determined to figure things out like this, i decided to try again only after i figured out i still had the 8.1.4 bootloader, and THE ONLY way i could figure out which boot loader i had was to load up fireflash again and see if it give me the RED WARNING in the first line about flashing or not flashing the 8.1.4, sure enough it showed no warning with 8.1.4 bootloader! SO instead of using fireflash i just used fastboot to apply the "stack override script" and flashed the freedom boot 8.4.6 image and the 2.7.0.0 TWRP and went smooth as butter, booted up in TWRP recovery and then rebooted several times to make sure all was good and then last boot in recovery i did a wipe with TWRP and installed CM11 and GAPPS zip and all has been good every since! :laugh: it really is a whole new tablet with CM11! :good: if you need more help i will do my best, trust me i know what it feels like to have the RED SCREEN and stuck in fastboot! keep me posted!
Mike
Click to expand...
Click to collapse
Thanks again @Mike. However, i wasn't able to do my factory backup images. and secondly, what did you use to restore the images? Did you use KKFA or the KFHD SRT? i'm sorry, i kinda scared now to proceed on my own.

From what i've read, you use the KFHD SRT for bricked devices USING a factory cable, is that right? from http://forum.xda-developers.com/showthread.php?t=1951254. Or do i use the KKFirstAide tool from this http://rootjunkysdl.com/?device=Kindle Fire HD 7in ?
Thanks again @11fan!

notiboy07 said:
From what i've read, you use the KFHD SRT for bricked devices USING a factory cable, is that right? from http://forum.xda-developers.com/showthread.php?t=1951254. Or do i use the KKFirstAide tool from this http://rootjunkysdl.com/?device=Kindle Fire HD 7in ?
Thanks again @11fan!
Click to expand...
Click to collapse
no, you DO NOT need a special "factory cable" for the 8.9 inch just the regular cable that come with the KFHD 8.9 or ANY usb/microusb cable like the one that come with your kindle, it's nothing special to that cable. and although i tried using those utilities you mentioned in your previous post to fix mine, NONE of them worked for me! the only thing i used was adb and fastboot commands and a recovery image DOWNLOADED from a thread here, thats was what ultimately booted my kindle back up in "factory" recovery mode (NOT fastboot mode) and it went through a couple prompts (on the kindle screen) and using the vol up/down and power buttons to select and enter respectively to do a factory restore all from the kindle screen once i finally got it to boot into it's own factory recovery. do you have fastboot working? if so i think we can fix it! mite have to go to a IM kinda app or google hangout or something for realtime communication but i feel like it can be fixed!
Mike
edit: all those file on rootjunky you linked to look to be for Kindle Fire HD 7 inch, you do have the 8.9 inch, correct???

11fan said:
no, you DO NOT need a special "factory cable" for the 8.9 inch just the regular cable that come with the KFHD 8.9 or ANY usb/microusb cable like the one that come with your kindle, it's nothing special to that cable. and although i tried using those utilities you mentioned in your previous post to fix mine, NONE of them worked for me! the only thing i used was adb and fastboot commands and a recovery image DOWNLOADED from a thread here, thats was what ultimately booted my kindle back up in "factory" recovery mode (NOT fastboot mode) and it went through a couple prompts (on the kindle screen) and using the vol up/down and power buttons to select and enter respectively to do a factory restore all from the kindle screen once i finally got it to boot into it's own factory recovery. do you have fastboot working? if so i think we can fix it! mite have to go to a IM kinda app or google hangout or something for realtime communication but i feel like it can be fixed!
Mike
edit: all those file on rootjunky you linked to look to be for Kindle Fire HD 7 inch, you do have the 8.9 inch, correct???
Click to expand...
Click to collapse
Thank you for the prompt reply. So now i know those wouldn't work. Yes, fastboot is working - it says fastboot on the screen of the kindle fire 8.9. Ok, so i need to get that recovery image - however, i think you were not able to link that thread. I'm sorry, can you please paste the link again?
I'm on google hangouts now. [email protected]
Thanks a lot @Mike!

I have been reading XDA for years, My KFHD 8.9 recently stopped booting also
My KFHD (Kindle Fire HD ) 8.9" (JEM) recently stopped working one day (about a month or 2 ago) while it was sitting plugged into a wall charger . Mine , since coming back to it while it was charging, stopped running and I can't remember if it was on or off while I charged it, but it's 100% stock and now it only boots as far as the non-animated part of the "Kindle fire" logo screen, and stays there indefinitely until the battery dies , or until I hold down the power button long enough to shut it down. I'm pretty sure it's either bricked (for whatever reason) , or has some part possibly broken on it (internally) ?
--- sidenote: one time I was given a case for a tablet, and without thinking about it, tried to see if my 8.9 inch model fit inside it and it didn't. Without forcing it in, as far as it did get in, caused my KFHD to reboot on its own?!
my only question here is , Is this a similar enough case , or is there anything else I should do to fix this? my device beeps on multiple computers I've attached it to , notifying it was detected by windows, and about 1/4 second later it dings the disconnected sound and I've never managed to get KFHD SRT (of any version) to work for me at all. Fastboot does not detect my device, even after installing drivers (have attempted this on a windows 7 64 bit computer, and a windows 8 64 bit computer, neither have shown any sign of functionality with fastboot)

Umisguy said:
My KFHD (Kindle Fire HD ) 8.9" (JEM) recently stopped working one day (about a month or 2 ago) while it was sitting plugged into a wall charger . Mine , since coming back to it while it was charging, stopped running and I can't remember if it was on or off while I charged it, but it's 100% stock and now it only boots as far as the non-animated part of the "Kindle fire" logo screen, and stays there indefinitely until the battery dies , or until I hold down the power button long enough to shut it down. I'm pretty sure it's either bricked (for whatever reason) , or has some part possibly broken on it (internally) ?
--- sidenote: one time I was given a case for a tablet, and without thinking about it, tried to see if my 8.9 inch model fit inside it and it didn't. Without forcing it in, as far as it did get in, caused my KFHD to reboot on its own?!
my only question here is , Is this a similar enough case , or is there anything else I should do to fix this? my device beeps on multiple computers I've attached it to , notifying it was detected by windows, and about 1/4 second later it dings the disconnected sound and I've never managed to get KFHD SRT (of any version) to work for me at all. Fastboot does not detect my device, even after installing drivers (have attempted this on a windows 7 64 bit computer, and a windows 8 64 bit computer, neither have shown any sign of functionality with fastboot)
Click to expand...
Click to collapse
I dont think this is the same case @Umisguy as you have not tinkered with your tablet (100% stock), while mine happened while trying to install a custom ROM. Maybe the amazon guys can help you?

Do you have 8.5.1 or 8.4.6 system image and the boot and recovery files
11fan said:
no, you DO NOT need a special "factory cable" for the 8.9 inch just the regular cable that come with the KFHD 8.9 or ANY usb/microusb cable like the one that come with your kindle, it's nothing special to that cable. and although i tried using those utilities you mentioned in your previous post to fix mine, NONE of them worked for me! the only thing i used was adb and fastboot commands and a recovery image DOWNLOADED from a thread here, thats was what ultimately booted my kindle back up in "factory" recovery mode (NOT fastboot mode) and it went through a couple prompts (on the kindle screen) and using the vol up/down and power buttons to select and enter respectively to do a factory restore all from the kindle screen once i finally got it to boot into it's own factory recovery. do you have fastboot working? if so i think we can fix it! mite have to go to a IM kinda app or google hangout or something for realtime communication but i feel like it can be fixed!
Mike
edit: all those file on rootjunky you linked to look to be for Kindle Fire HD 7 inch, you do have the 8.9 inch, correct???
Click to expand...
Click to collapse
Folks,
I got in to the same trouble able to mess up the KF and get a redscreen but used KFHD SRT to reflash the 8.1.4 system image, boot image, recovery image but now I ended up in the boot loop mode where it shows reboot kindle or Reset to factory Dafaults but as I flashed every thing am unable to reset to factory. As I got the tablet recently it came with 8.5.1 so I need to try with the latest image I can get.
If there are any suggestions i can try please let me know.

Which stage of bricked are you at? I don't exactly understand how far you got or didn't get? Red screen? Orange kindle screen? Boot loop? If you can give a little more detail I may be able to help
Mike
sent from my jem running CM11 using TapaTalk
---------- Post added at 12:21 PM ---------- Previous post was at 11:32 AM ----------
"Do you have 8.5.1 or 8.4.6 system image and the boot and recovery files"
I was on 8.5.1 when i did mine, BUT the boot image you will be using is the freedom BOOT image is 8.4.6 from Hashcodes thread and the "2nd" BOOTLOADER is 8.1.4 also from Hashcodes thread.....I also have "my" STOCK BOOT IMAGE from 8.5.1 from my backup i did BEFORE i started this OP
Hope this helps and not confuses you more!
Mike

11fan said:
Which stage of bricked are you at? I don't exactly understand how far you got or didn't get? Red screen? Orange kindle screen? Boot loop? If you can give a little more detail I may be able to help
Mike
sent from my jem running CM11 using TapaTalk
---------- Post added at 12:21 PM ---------- Previous post was at 11:32 AM ----------
"Do you have 8.5.1 or 8.4.6 system image and the boot and recovery files"
I was on 8.5.1 when i did mine, BUT the boot image you will be using is the freedom BOOT image is 8.4.6 from Hashcodes thread and the "2nd" BOOTLOADER is 8.1.4 also from Hashcodes thread.....I also have "my" STOCK BOOT IMAGE from 8.5.1 from my backup i did BEFORE i started this OP
Hope this helps and not confuses you more!
Mike
Click to expand...
Click to collapse
I am at the boot loop where it shows the kindle reboot or factory restore option and it loops into that screen forever. Before that I hit with a redscreen and able to get the device into this loop mode by using the 8.1.4 system image, boot , recovery images. Now I ended up in this boot loop so I wonder If I have the actual 8.5.1 system,boot,recovery images I can flash them in the fastboot mode on the device. Also another issue am facing is ADB command cannot recognize the device even though am in the fastboot mode.
Thanks for the prompt reply mike.

I'm at work so kinda limited to my replies and quickness, and I'm by no means a dev or pro at this, I just learn by trial and error and lots of reading, especially when it comes to the kfhd! I went through this same mess SEVERAL times with my kindle before I finally got it straight! Bricked mine several times, once to the point I thought it was toast! So I no how you feel! 1st thing u need to know is adb only works when device is booted up in the os, that's why you getting device not found, but fastboot will work as you know, if you successfully flashed the 8.1.4 boot loader then its there to stay at least in my findings, after flashing back all my stock images and multiple factory resets I still had the second 8.1.4 bootloader installed. I'm using tablet now at work and I have the thread bookmarked on my PC at home that ultimately got me back up and going but I will try to find it and get you a link, if not I will post the link when I get home after work around 5 30 est, there is a recovery image that you will need to flash that should get you back into factory recovery mode and work instead of looping
Mike
sent from my jem running CM11 using TapaTalk

11fan said:
I'm at work so kinda limited to my replies and quickness, and I'm by no means a dev or pro at this, I just learn by trial and error and lots of reading, especially when it comes to the kfhd! I went through this same mess SEVERAL times with my kindle before I finally got it straight! Bricked mine several times, once to the point I thought it was toast! So I no how you feel! 1st thing u need to know is adb only works when device is booted up in the os, that's why you getting device not found, but fastboot will work as you know, if you successfully flashed the 8.1.4 boot loader then its there to stay at least in my findings, after flashing back all my stock images and multiple factory resets I still had the second 8.1.4 bootloader installed. I'm using tablet now at work and I have the thread bookmarked on my PC at home that ultimately got me back up and going but I will try to find it and get you a link, if not I will post the link when I get home after work around 5 30 est, there is a recovery image that you will need to flash that should get you back into factory recovery mode and work instead of looping
Mike
sent from my jem running CM11 using TapaTalk
Click to expand...
Click to collapse
That will be great Mike.
Thanks,
Krishna

krishnasanga said:
I am at the boot loop where it shows the kindle reboot or factory restore option and it loops into that screen forever. Before that I hit with a redscreen and able to get the device into this loop mode by using the 8.1.4 system image, boot , recovery images. Now I ended up in this boot loop so I wonder If I have the actual 8.5.1 system,boot,recovery images I can flash them in the fastboot mode on the device. Also another issue am facing is ADB command cannot recognize the device even though am in the fastboot mode.
Thanks for the prompt reply mike.
Click to expand...
Click to collapse
sent from my jem running CM11 using TapaTalk
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
11fan said:
hopefully you backed up all images first? i made that same mistake with fireflash to "boot into recovery" yep booted mine right into a brick, after several different types of "softbricks" i finally got mine back straight and now kinda scared to try the 2nd bootloader OP again, because idk which bootloader i am on right now and cant find a way to identify it! i will try to find the thread that got me back straight, give me a while
Mike
Click to expand...
Click to collapse
notiboy07 said:
Thanks @Mike. It kinda reassuring to know that somehow you were able to fix your kindle. BUT i have a big problem, i was not able to back up the images (i wasnt able to go into fastboot, i think my windows 8 pc has a problem with that, or is it just me?). is it possible to use your images? (we're both 8.5.1).
Thanks again mike. I think i'll be scared to try the 2nd bootloader again too.
Click to expand...
Click to collapse
sent from my jem running CM11 using TapaTalk

krishnasanga said:
That will be great Mike.
Thanks,
Krishna
Click to expand...
Click to collapse
ok @krishnasanga go here http://forum.xda-developers.com/showpost.php?p=37278819&postcount=193 and grab the boot image from step 3 and the recovery image from step 4 and place those in C:/ or wherever you have your adb and fastboot tools, should be in C:/ to make things easier but don't HAVE to be if you know how to enter correct paths in the command prompt. IGNORE all the Kindle First Aide stuff, you will just flash these with regular command prompt running as ADMIN (right click command prompt,click run as admin) start at step # 6 (ignore first aide stuff) and open command prompt running as admin and go from there EXACTLY as it says with kindle plugged up to usb and powered OFF. most likely HOPEFULLY you will not have to go past the reboot in step 8 and you will be in factory recovery and will be able to "reset to factory settings" assuming the recovery file is flashed successfully, if you do get to step 8 without issue and get to the fastboot erase userdata -i 0x1949 command, don't panic if it seems like it's taking a long time, i have seen this userdata erase take up to 40+ minutes! IF you get that far and userdata gets erased properly the next command to reboot "should" put the kindle into factory recovery where you can "reset to factory" and will not keep looping. GOOD LUCK! hope this helps and works out for you and i will be around the rest of the evening if i can help let me know and i will try
Mike

11fan said:
ok @krishnasanga go here http://forum.xda-developers.com/showpost.php?p=37278819&postcount=193 and grab the boot image from step 3 and the recovery image from step 4 and place those in C:/ or wherever you have your adb and fastboot tools, should be in C:/ to make things easier but don't HAVE to be if you know how to enter correct paths in the command prompt. IGNORE all the Kindle First Aide stuff, you will just flash these with regular command prompt running as ADMIN (right click command prompt,click run as admin) start at step # 6 (ignore first aide stuff) and open command prompt running as admin and go from there EXACTLY as it says with kindle plugged up to usb and powered OFF. most likely HOPEFULLY you will not have to go past the reboot in step 8 and you will be in factory recovery and will be able to "reset to factory settings" assuming the recovery file is flashed successfully, if you do get to step 8 without issue and get to the fastboot erase userdata -i 0x1949 command, don't panic if it seems like it's taking a long time, i have seen this userdata erase take up to 40+ minutes! IF you get that far and userdata gets erased properly the next command to reboot "should" put the kindle into factory recovery where you can "reset to factory" and will not keep looping. GOOD LUCK! hope this helps and works out for you and i will be around the rest of the evening if i can help let me know and i will try
Mike
Click to expand...
Click to collapse
Mike,
I tried with this new boot and recovery images but still stuck in the loop , can you upload your backup files of 8.5.1 system.img,boot.img,recovery.img I think that will be my last shot to try to unbrick this device.
Thanks,
Krishna

Bricked?!?

Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.

derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
I have no experience with your issue but it sounds like a soft brick. Im sure if you follow this guide ypu can fix it. https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418 hopefully this helps until someone who really knows can help you.

Dielahn said:
I have no experience with your issue but it sounds like a soft brick. Im sure if you follow this guide ypu can fix it. https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418 hopefully this helps until someone who really knows can help you.
Click to expand...
Click to collapse
That simple thread actually gave me an idea. I grabbed the latest SDK tools. Presto!
Note to anyone else with this issue...

derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
By the way, the dead Droid is recovery, from that screen, hold power and press up for recovery menu, in case you ever get stuck again

And just for future reference for others who may be in a similar issue and stumble across this thread...
As long as you've successfully unlocked your bootloader and "fastboot devices" successfully pulls up your device, you'll be just fine. You just gotta take a step back, breath and then make sure your SDK tools are updated before moving forward.

if the flash tool isn't working, use my script:
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761

i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?

warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
If you cannot get the Bootloader to load, then you are seriously SOL. You have a hard bricked device.
Only thing you can do now is raise a support case with Google and hope that allow you to get a replacement with the only explanation being, "The phone restarted on it's own and never came back up." Or something similar and vague without expressly telling them what you did.

warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
Make sure you try a different cable to connect your phone to your PC.. I had the same issue, and I try two different cable before my device accepted the flash-all

Okay, so somehow fortunately I was able to get back into my TWRP 1 last time and able to push my files I needed to boot it back up...
Raistline said:
If you cannot get the Bootloader to load, then you are seriously SOL. You have a hard bricked device.
Only thing you can do now is raise a support case with Google and hope that allow you to get a replacement with the only explanation being, "The phone restarted on it's own and never came back up." Or something similar and vague without expressly telling them what you did.
Click to expand...
Click to collapse
The funny thing is I was able to and was in bootloader but I couldn't use any commands from my computer (as far as I know) which is why I was freaking out.
I should've but I didn't actually try using other cables. I did try other usb ports but that didn't do anything.
I still kind of believe that my phone (somehow) got messed up from loading TWRP. I don't know if it's because it is still beta or what but I am like 99% sure it was from that as I can't see anything else being the problem.

warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
just install the lastest fastboot and adb drivers from google and flash the factory image using commands or use any script .
after that everytime my phone got stuck on google logo .
how i fixed - Temporary boot twrp beta2 recovery using cmd (fastboot boot abc.img) "here abc refers to the correct name of the img file" and once booted into recovery go to advanced and select Partition A and reboot.
It will boot up just fine
Here is the link for a script that will flash both partitions with stock image
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761

derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
Something similar for me but with different reason for starting all this. When I did sideload of 8.1 all went well but my camera wasn't working (I saw the same thing in 8.1 DP) so I needed to go back to 8.0 but you can't sideload downgrade. I went to Google to get replacement sent and figure I might try to sort things out with this one in the meantime. I had to unlock to be able to just flash the factory 8.0 image so did that with both the unlock commands, then after that and after update I just got hung on the white screen with google logo. I was able to get back to bootloader with the power button + volume from off and from there I would get to the screen with the android and the exclamation point - I think you hold volume up and then power to go to sideload. Once there I just sideloaded 8.0 and all was good. I do still get the warning about corrupt whatever and have to hit power on reboot or fresh power up but I could redo the locks and whatnot and all seems fine now with camera working.
At the least I got camera back while waiting for replacement.
b4db0ys said:
just install the lastest fastboot and adb drivers from google and flash the factory image using commands or use any script .
after that everytime my phone got stuck on google logo .
how i fixed - Temporary boot twrp beta2 recovery using cmd (fastboot boot abc.img) "here abc refers to the correct name of the img file" and once booted into recovery go to advanced and select Partition A and reboot.
It will boot up just fine
Here is the link for a script that will flash both partitions with stock image
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
This cleaned things up for me - still no camera in 8.1 but I got the replacement coming.

So I'm in the same boat as the OP but my bootloader is locked. Am I totally screwed? Is there a way to do any of this when the device won't show up in ADB?

Deuces said:
if the flash tool isn't working, use my script:
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
can you just develop some scripts that working on locked bootloader ?
i have a bricked Pixel xl with locked bootloader and oem locked

If you can boot twrp but can't connect to a pc, a type c flash drive comes in handy. Load it with the needed ota, twrp installer zip and Just mount it and you're good to go.