[ROM][STOCK][CWM][ROOTED][MG2] - Galaxy S III (SPH-L710 – Boost/Virgin Mobile) - Sprint Samsung Galaxy S III

Ok guys and gals, here we go again. This is a stock, deodexed, version of the latest OTA MG2 build for Boost/VM variants of the Samsung Galaxy S III, with SuperSU and Busybox installed. Apks are also zipaligned. This will not install a modem and should not wipe your device. This was built from the Samsung Official MG2 build tar.
The reason I say for both variants is because as far as I can tell, this update is a “generic” update. What I mean is that whatever carrier you are on, it will update your phone and not change any of your carrier’s settings, ie, mmsc url, carrier banner, etc.
Thanks:
Google and XDA, for obvious reasons
Kennyglass123 - For posting guidance and all the awesome moderating he does around town
Stryke_the_Orc - For believing in me, for being a great friend and mentor, and always pushing me to do more
Garwynn – Without you showing me how to “catch” this, I would have never had the tar to build the zip from. Thanks for all your help and support.
Remotehugger – For being patient as I built this. I know you’ve been dying to test drive it!
If I have forgotten someone, please, please, let me know. I am all for giving credit where it is due.
Disclaimer: I am not responsible for whatever you do with your phone. Please flash at your own risk
Download Link:
http://www.androidfilehost.com/?fid=23212708291678176
Md5: d813784d8ce01c45a9870bc9981445ef
Flashing Instructions:
This will NOT flash a modem. If you are coming from stock MD7, you will keep MD7. Same goes for whatever baseband you have right now!
1. Download zip to your sdcard
2. Reboot into CWM, TWRP, or other compatible recovery (I recommend CWM 6.0.3.1 Touch)
3. Wipe Data, Cache, Dalvik(might be able to flash dirty if coming from stock TW, try at your own risk)
4. Flash zip
5. Reboot
6. Profit
Issues:
Not an issue per se, since Sprint hasn't updated to MG2, but for some reason, flashing this to Sprint, even with the modem, is causing data issues. Might be an apn/mmsc issue, but I don't have Sprint, so I can't confirm. If someone with Sprint figures this out, please post it for all to know
Note:
As I said before, this will NOT install a modem. Until we get some modem zips, the only way that I have found to get the modem I want is to flash the OTA tar, to get the modem, then whatever zip rom I want(if that makes sense).

Downloading now !!!!!!! now i will stop getting those pesky push notifications that a firmware update is available - lol - thank you tons jd - so very much appreciated -

Thanks for the hard work! Is there anyway someone can post an up to date modem that i can flash. For some reason I am not getting data.

Is this jb4.1.2 still or 4.2 yet?

neemot said:
Thanks for the hard work! Is there anyway someone can post an up to date modem that i can flash. For some reason I am not getting data.
Click to expand...
Click to collapse
Update your profile. If that doesn't work there is a thread with all of the Sprint modems in the this section. I
Sprint Modem thread. This will give you the tools you'll need to flash the modem and also revert back if needed.
http://forum.xda-developers.com/showthread.php?t=1787677

tofumonster said:
Is this jb4.1.2 still or 4.2 yet?
Click to expand...
Click to collapse
Still 4.1.2 unfortunately.
Sent from my SPH-L710 using Tapatalk

ghostzyden said:
Still 4.1.2 unfortunately.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
So what would be the advantage over L710VPBMD4?

neemot said:
Thanks for the hard work! Is there anyway someone can post an up to date modem that i can flash. For some reason I am not getting data.
Click to expand...
Click to collapse
Here you go. I dropped these last night. Enjoy
http://forum.xda-developers.com/showthread.php?p=47569788
Sent from my SPH-L710 using XDA Premium 4 mobile app

tempests said:
So what would be the advantage over L710VPBMD4?
Click to expand...
Click to collapse
I'm on Boost, and therefore have MD7, which is Boost and vm version of MD4. And I haven't noticed any real differences, except a few app updates. Sprint has not updated to MG2, only Boost and VM that I'm aware of. However, I have a theory I'd like a Sprint user to give me feedback on. If a Sprint user flashed this, please tell me what your dropdown banner and network(settings/about device/status)reads. Also, please verify mms works sending and receiving. Thanks! And enjoy. And look at the post above for the modem for this. I'll add it to the OP later.
Sent from my SPH-L710 using XDA Premium 4 mobile app

jdsingle76 said:
I'm on Boost, and therefore have MD7, which is Boost and vm version of MD4. And I haven't noticed any real differences, except a few app updates. Sprint has not updated to MG2, only Boost and VM that I'm aware of. However, I have a theory I'd like a Sprint user to give me feedback on. If a Sprint user flashed this, please tell me what your dropdown banner and network(settings/about device/status)reads. Also, please verify mms works sending and receiving. Thanks! And enjoy. And look at the post above for the modem for this. I'll add it to the OP later.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi there - I'm on Sprint. I flashed your rom but unfortunately I can't get very far. I am not able to get data either with the MD4 modem or the MG2 modem. Rom will only work on wifi.

nyfl2004 said:
Hi there - I'm on Sprint. I flashed your rom but unfortunately I can't get very far. I am not able to get data either with the MD4 modem or the MG2 modem. Rom will only work on wifi.
Click to expand...
Click to collapse
Hmmm, that's interesting. So even flashing my MG2 rom, you're unable to get any data? I would think that it would be the same concept as me(being on Boost), flashing a Sprint ROM...have you checked your apn and mmsc settings? They may be causing the issue. I may change the heading to just Boost/VM then, if that's the case. Thanks for the information.
Edit: Did the banner stay Sprint?

jdsingle76 said:
Hmmm, that's interesting. So even flashing my MG2 rom, you're unable to get any data? I would think that it would be the same concept as me(being on Boost), flashing a Sprint ROM...have you checked your apn and mmsc settings? They may be causing the issue. I may change the heading to just Boost/VM then, if that's the case. Thanks for the information.
Edit: Did the banner stay Sprint?
Click to expand...
Click to collapse
You're welcome. I'm currently at work, so I don't have any wi-fi. I should be home in about 2 hrs. I will check all settings and the banner and report back. Thanks

nyfl2004 said:
You're welcome. I'm currently at work, so I don't have any wi-fi. I should be home in about 2 hrs. I will check all settings and the banner and report back. Thanks
Click to expand...
Click to collapse
Shouldn't need anything at all to check that. I meant just the pulldown notification bar(should read Sprint), and in settings/about device/status, what does the network say....and I'm sure you know, but if you change your mmsc/apn settings, you'll need your MSL. Good luck, and thanks again for the info.

For those of you reading this and have a phone with the newest Boost MG2 update then you will need to call Boost to get your MSL. No way to get it with the old methods. Trust me, I've tried. LOL.
They'll give it to you easily enough. I had mine 10 seconds after telling them I wanted it.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2

jdsingle76 said:
Shouldn't need anything at all to check that. I meant just the pulldown notification bar(should read Sprint), and in settings/about device/status, what does the network say....and I'm sure you know, but if you change your mmsc/apn settings, you'll need your MSL. Good luck, and thanks again for the info.
Click to expand...
Click to collapse
I had to end up flashing back to LJ7 when I first got my phone, then do the six zeros in the terminal emulator trick, lol. Real pain in the butt, but got it. Thanks for passing this info on though :thumbup:
Sent from my SPH-L710 using xda app-developers app

wetbiker7 said:
For those of you reading this and have a phone with the newest Boost MG2 update then you will need to call Boost to get your MSL. No way to get it with the old methods. Trust me, I've tried. LOL.
They'll give it to you easily enough. I had mine 10 seconds after telling them I wanted it.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
The above message should be for you! Stupid app, lol!
Sent from my SPH-L710 using xda app-developers app

jdsingle76 said:
The above message should be for you! Stupid app, lol!
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I had to have my MSL to use the Prl Write feature. You don't need your MSL to change your APNs. All I do to change mine is flash a Boost xml with the APN Backup and Restore app.
As for the LJ7 modem, I'm running it now. I've spoke with several of us Boost guys and we're all getting better reception with the older modem. So much for newer being better.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2

wetbiker7 said:
I had to have my MSL to use the Prl Write feature. You don't need your MSL to change your APNs. All I do to change mine is flash a Boost xml with the APN Backup and Restore app.
As for the LJ7 modem, I'm running it now. I've spoke with several of us Boost guys and we're all getting better reception with the older modem. So much for newer being better.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Have you tried my MG2 modem zip?
Sent from my SPH-L710 using XDA Premium 4 mobile app

jdsingle76 said:
Have you tried my MG2 modem zip?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No. Thankfully I kept my backup. I just use the restoremodem.zip to restore my backup of MG2.
If I decide to switch back I'll give it a try. Going to stay with Lj7 right now since I'm getting better signal.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2

wetbiker7 said:
No. Thankfully I kept my backup. I just use the restoremodem.zip to restore my backup of MG2.
If you decide to switch back I'll give it a try. Going to stay with Lj7 right now since I'm getting better signal.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Fair enough. What rom are you running?
Sent from my SPH-L710 using XDA Premium 4 mobile app

Related

Flashed phone keeps losing 3g data after rom flash

About a month ago I flashed to the newest version of "The Peoples Rom" with Ktoonsez kernel. I didn't like the kernel so I flashed the same zip but used the stock kernel. As soon as I came back online I was only getting 1x data. After playing around and basically did everything to re-flash the phone and after a few hours got 3g data working again. Now a week later the 3g has randomly dropped and I can not get it back.....
Has anyone had this problem??? I am going to try to flash a few different roms to see if I can get the 3g to stick on any of them.....
Update Profile and prl also Go into the phone dialer and enter the following code ##72786# this will do a hands of reactivation. TW Roms usually won't affect signal so flashing g another rom won't help.
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Update Profile and prl also Go into the phone dialer and enter the following code ##72786# this will do a hands of reactivation. TW Roms usually won't affect signal so flashing g another rom won't help.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Didn't work, all it did was reset my MDN and MSID and give me an error when I tried to activate
Edit: Silly question but do I need wifi on for it to work?
Ronhero said:
Didn't work, all it did was reset my MDN and MSID and give me an error when I tried to activate
Edit: Silly question but do I need wifi on for it to work?
Click to expand...
Click to collapse
Reset your mdn and msid? What are you saying? You are on Sprint right? You went into the dialer an entered the hands off network reactivation like I said. Then once it provisions again update profile and prl?
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Update Profile and prl also Go into the phone dialer and enter the following code ##72786# this will do a hands of reactivation. TW Roms usually won't affect signal so flashing g another rom won't help.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
edfunkycold said:
Reset your mdn and msid? What are you saying? You are on Sprint right? You went into the dialer an entered the hands off network reactivation like I said. Then once it provisions again update profile and prl?
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I am on boost mobile
I did what you said with wifi on and it didn't help I still have 1x
Wow thanks for saying your on Boost Mobile, don't you think that would have been important to put in the title or at least in the OP within your question?
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Wow thanks for saying your on Boost Mobile, don't you think that would have been important to put in the title or at least in the OP within your question?
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I am sorry I thought I put flashed boost phone when I only put flashed phone. Sorry about that
Let me see if I can get someone who may know more in regards to boost.
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Let me see if I can get someone who may know more in regards to boost.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Thank you so much! I have flashed a few phones to boost, this is the first time I am totally stumped. Like I mentioned before I started having problems after a kernal flash from the peoples rom.
I havent used boost for awhile but right now I am on ting which is still a sprint network and for them and my previous runs with boost using hands free activation and updating prl/profile has always worked as expected. I would download the stock md4 rom from freeza and do the hands free activation ##72786# see if that works as expected. If you have data working you should be fine to back to tpr.
Sent from my SPH-L710 using Tapatalk 4
iamikon said:
I havent used boost for awhile but right now I am on ting which is still a sprint network and for them and my previous runs with boost using hands free activation and updating prl/profile has always worked as expected. I would download the stock md4 rom from freeza and do the hands free activation ##72786# see if that works as expected. If you have data working you should be fine to back to tpr.
Sent from my SPH-L710 using Tapatalk 4
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=40663535
I am having problems finding that exact build, will this work?
Ronhero said:
http://forum.xda-developers.com/showthread.php?p=40663535
I am having problems finding that exact build, will this work?
Click to expand...
Click to collapse
Thats the one.
Sent from my SPH-L710 using Tapatalk 4 Beta
iamikon said:
Thats the one.
Sent from my SPH-L710 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok I am downloading the zip / modem / kernel right now. I am going to install the zip "Odexed No Data Wipe Zip" that I am going to install from my custom recovery. Then use one click exe's for the modem and kernel. I will let you know what happens. Thanks a ton in advance.
Ronhero said:
Ok I am downloading the zip / modem / kernel right now. I am going to install the zip "Odexed No Data Wipe Zip" that I am going to install from my custom recovery. Then use one click exe's for the modem and kernel. I will let you know what happens. Thanks a ton in advance.
Click to expand...
Click to collapse
That did not work, I updated and now I can not write any profile settings or send the default password...
Ronhero said:
That did not work, I updated and now I can not write any profile settings or send the default password...
Click to expand...
Click to collapse
If you are on Boost Mobile as you stated before. First thing you should do is check out THIS THREAD. Then you can check out the post HERE in the same thread.
prboy1969 said:
If you are on Boost Mobile as you stated before. First thing you should do is check out THIS THREAD. Then you can check out the post HERE in the same thread.
Click to expand...
Click to collapse
I am familiar with that page, as I stated before it had 3g working for MONTHS and then it dropped out for no reason.... I have flashed back all the profile 0 information and did a profile update but still only get 1x....
The reason I linked the thread, is because the issue has been mentioned before in the thread. You may be able to get a resolution to the issue faster.

ICS 4.0.4 Flashed to Verizon Prepaid; updating to JB bad idea??

I bought my phone already flashed to Verizon prepaid. It is currently on ICS 4.0.4 rooted stock build FH13. The guy who flashed it sold it to me and told me to never update it cuz it could destroy the flash. Is this true? Also, hot spot is working and i wouldn't want to lose that if i were to update. So should i just disable OTA update notifications with FOTAkill.apk and stay on 4.0.4?
When you update just change the APN for MMS. The flash should stay regardless of the ROM on the phone. Be sure to do a nandroid first. Also someone who has done a flash to another carrier can please chime in
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
When you update just change the APN for MMS. The flash should stay regardless of the ROM on the phone. Be sure to do a nandroid first. Also someone who has done a flash to another carrier can please chime in
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Your correct . You are good to go. The update won't hurt your Verizon prepaid flash. Just change APN and your set. I'm able to jump around ROMs with no problem at all. Happy flashing!
Sent from my SPH-D710 using xda premium
patrao_n said:
When you update just change the APN for MMS. The flash should stay regardless of the ROM on the phone. Be sure to do a nandroid first. Also someone who has done a flash to another carrier can please chime in
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
DO NOT UPGRADE! If you're on PagePlus, the system WILL NOT RECOGNIZE YOUR PHONE. The place you bought it will charge you to re-flash it back to 4.0.4.
Just curious but how will flashing a new ROM in Odin or cwm make the system not recognize the phone? From what I can tell the "flash" was using the numbers from a donor phone. All the info used in the flash except the APN would all still be there after a new ROM flash. Can you not factory reset the phone after a flash to page plus as well? I would like to know what your info is. Because this is the first I have heard it.
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
Just curious but how will flashing a new ROM in Odin or cwm make the system not recognize the phone? From what I can tell the "flash" was using the numbers from a donor phone. All the info used in the flash except the APN would all still be there after a new ROM flash. Can you not factory reset the phone after a flash to page plus as well? I would like to know what your info is. Because this is the first I have heard it.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I'm also curious about this as well. I have flashed many phones to various carriers and never had a problem with a upgrade.
Sent from my SPH-D710 using xda premium
Ok it looks like someone is saying it will be safe to update and someone else is saying that it is NOT safe to update. I cannot afford to lose the flash as I do not have access to a computer so I can't take the chance unless someone can absolutely positively for sure tell me that I will not lose my Verizon Prepaid flash.
If the Epic 4g Touch was made for Verizon I wouldnt be worried but being that its originally a Sprint phone I am having doubts. Isn't the OTA update designed for the Sprint Epic 4g Touch? If I do end up letting the OTA update install what version will I end up being on?
http://forum.xda-developers.com/showthread.php?t=2314541
These people have done it. Maybe ask in there or pm them. I am leaning towards operator error for the person saying don't do it.
Sent from my SPH-L900 using Tapatalk 2
hackaveli said:
Ok it looks like someone is saying it will be safe to update and someone else is saying that it is NOT safe to update. I cannot afford to lose the flash as I do not have access to a computer so I can't take the chance unless someone can absolutely positively for sure tell me that I will not lose my Verizon Prepaid flash.
If the Epic 4g Touch was made for Verizon I wouldnt be worried but being that its originally a Sprint phone I am having doubts. Isn't the OTA update designed for the Sprint Epic 4g Touch? If I do end up letting the OTA update install what version will I end up being on?
Click to expand...
Click to collapse
I use Verizon prepaid on my epic 4g and epic 4g touch. I have been able to Odin both phones and not loose any settings. I also was able to ota and install cwm and flash any cm10.1 build and everything worked. Text calls and 3g work. MMS doesnt work unless I change APN settings
Sent from my SPH-D710 using xda premium
beezie42 said:
I use Verizon prepaid on my epic 4g and epic 4g touch. I have been able to Odin both phones and not loose any settings. I also was able to ota and install cwm and flash any cm10.1 build and everything worked. Text calls and 3g work. MMS doesnt work unless I change APN settings
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
If I do the OTA update, what version will I be on? And will foxfi or SVPT work on it?
Beezie I tried following tutorials all over google on getting my mms to work, but I cant get it to work on my native/built-in messaging app... Only way I can get MMS messages is by using GO SMS PRO app. Can I screenshot you my ##DATA# settings and let me know if i need to change any anything?
hackaveli said:
If I do the OTA update, what version will I be on? And will foxfi or SVPT work on it?
Beezie I tried following tutorials all over google on getting my mms to work, but I cant get it to work on my native/built-in messaging app... Only way I can get MMS messages is by using GO SMS PRO app. Can I screenshot you my ##DATA# settings and let me know if i need to change any anything?
Click to expand...
Click to collapse
Well the update depends on which brand epic touch your on. (Sprint, Virgin Mobile, Boost) it will update you too jellybean either way just your modem will be different. I have a sprint brand.
Ya it is a pain to get MMS to work threw touchwiz without a 3rd party app of some sorts. I find it pretty easy on CM builds. I normally just ditch MMS and send the pic threw gmail cuz its less of a headache. But sure you can send me a screenshot of the settings. I'm willing to help as much as I can.
Sent from my SPH-D710 using xda premium
beezie42 said:
Well the update depends on which brand epic touch your on. (Sprint, Virgin Mobile, Boost) it will update you too jellybean either way just your modem will be different. I have a sprint brand.
Ya it is a pain to get MMS to work threw touchwiz without a 3rd party app of some sorts. I find it pretty easy on CM builds. I normally just ditch MMS and send the pic threw gmail cuz its less of a headache. But sure you can send me a screenshot of the settings. I'm willing to help as much as I can.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'm on a sprint epic 4g touch. Do you know what version it will update to?
hackaveli said:
I'm on a sprint epic 4g touch. Do you know what version it will update to?
Click to expand...
Click to collapse
Gb27 jellybean 4.1.2.
Sent from my SPH-D710 using xda premium
Okay three screenshots attached to this message. Thanks beezie
Interesting. I have the same settings saved on my computer for when I had touchwiz... This is what I was saying with having to use a 3rd party app and the headaches.
Have you considered jumping over to a cm10.1 build? MMS used to be a big issue for me until I realized what a pain it can be from phone to phone to upgrade etc. I'll flash over to stock tomarow after work and let you know if I can get it working right again. Sorry I can't be of more further help.
Sent from my SPH-D710 using xda premium
Im actually scared to flash my rom as i dont have access to a computer if it bricks. But i might if someone were to guarantee i wont lose root or flash AND i will still have wifi tethering capability. Im gonna do some research on the cm10.1 rom. Yea id appreciate it if you could help me out tomorrow. Thanks again man. Btw, does you're phone go into airplane mode every now n then? Mine does for about ten seconds then comes back on. It'll happen like maybe five times a day. Was wondering if that's normal. If not, is it something cm10.1 could fix?
Its not normal. There was a bunch of bugs in the ROM you are on. Being on that build though because its rooted you can use mobile Odin. To get the modem you would need to flash that in cwm though.
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
Its not normal. There was a bunch of bugs in the ROM you are on. Being on that build though because its rooted you can use mobile Odin. To get the modem you would need to flash that in cwm though.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Yup patroa is correct. ICS builds for the epic touch were horrible. (In My Opinion) I wish I could give you a 100% guarantee that nothing could go wrong but there is always a small slight chance.
No its not normal for airplane mode to pop on from time to time.
I rooted and used mobile Odin to install a cwm and flashed a cm10.1 build all without a volume down button (can't easily get into download mode or at all) I was able to do it from a ICS build. The same build you are on.
Sent from my SPH-D710 using xda premium
beezie42 said:
Yup patroa is correct. ICS builds for the epic touch were horrible. (In My Opinion) I wish I could give you a 100% guarantee that nothing could go wrong but there is always a small slight chance.
No its not normal for airplane mode to pop on from time to time.
I rooted and used mobile Odin to install a cwm and flashed a cm10.1 build all without a volume down button (can't easily get into download mode or at all) I was able to do it from a ICS build. The same build you are on.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
What would you say the odds are of something going wrong? Like if you were to compare the amount of horror stories to the amount of success stories what the ratio look like? One bad scenario to one hundred successful ones?
hackaveli said:
What would you say the odds are of something going wrong? Like if you were to compare the amount of horror stories to the amount of success stories what the ratio look like? One bad scenario to one hundred successful ones?
Click to expand...
Click to collapse
Just follow directions to the letter. Almost all if not all issues in flashing ROMs are from not following directions close enough. You are already rooted so get mobile Odin from play store or here on xda download el26 or el29 kernel from the kernel repository DL the tar file flash in mobile Odin boot into recovery make backup wipe and flash the ROM of your choosing. There is a ton of awesome ones out there
Sent from my SPH-D710 using xda app-developers app

Having trouble with SMS issues please help!!!

I'm sure this question has been answered b4 and I'm sorry. So just hear me out. I've had problems over the past week with getting my phone to receive SMS and calls. I can make calls but I'm not able to receive them. I was on the phone with the sprint the other night and they were doing all these things to try and fix it. They had me do dial pad codes and my phone did not respond to those. They had me send some SMS messages to myself the text went through but didn't go back to my phone. And when I reflashed the modem and rom on Sunday afternoon I lost 3g I used to get almost 5-6 bars in my house on 3g and now I barely get 1 bar. I am on Stock Gb27 rooted stock kernel but I was on agats Gb27. I need help I would like to avoid getting a new phone. Thank you in advanced
Sent from my SPH-D710 using xda premium
Jared King said:
I'm sure this question has been answered b4 and I'm sorry. So just hear me out. I've had problems over the past week with getting my phone to receive SMS and calls. I can make calls but I'm not able to receive them. I was on the phone with the sprint the other night and they were doing all these things to try and fix it. They had me do dial pad codes and my phone did not respond to those. They had me send some SMS messages to myself the text went through but didn't go back to my phone. And when I reflashed the modem and rom on Sunday afternoon I lost 3g I used to get almost 5-6 bars in my house on 3g and now I barely get 1 bar. I am on Stock Gb27 rooted stock kernel but I was on agats Gb27. I need help I would like to avoid getting a new phone. Thank you in advanced
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
When you went back to stock did you update you're pro and profile...and what modem did you flash..
Gil81 said:
When you went back to stock did you update you're pro and profile...and what modem did you flash..
Click to expand...
Click to collapse
Well I was already on Stock Rooted GB27 and was having problems so I tried to Odin GB27 to fix it and factory reset through stock recovery and then update the prl and profile but that didn't fix it. And I've tried reflashing GB27 modem but that doesn't work either.
Sent from my SPH-D710 using xda premium
Jared King said:
Well I was already on Stock Rooted GB27 and was having problems so I tried to Odin GB27 to fix it and factory reset through stock recovery and then update the prl and profile but that didn't fix it. And I've tried reflashing GB27 modem but that doesn't work either.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
The signal issue is a funny thing to work out...I would try going back to stock ICS and ICS modem...before that you should make sure no tower work is going on in you're area.. ..if you go to ICS update prl/profile .... Check signal...then proceed to gb27.....rom and modem or another job modem...just my thoughts...let me know how it goes..
K thanks man! I will do that but it won't be till later tonight. I probably won't be able to Post results till tomorrow afternoon.
Sent from my SPH-D710 using xda premium
Zo i did what you said. I'm currently on fl24 and am still having problems. Wtf is going on. Sorry this is pissing me off now. I did prl and all that in ics and it hasn't done anything
Sent from my SPH-D710 using xda premium
I'm getting a new E4GT
Sent from my SPH-D710 using xda premium
Gil81 said:
The signal issue is a funny thing to work out...I would try going back to stock ICS and ICS modem...before that you should make sure no tower work is going on in you're area.. ..if you go to ICS update prl/profile .... Check signal...then proceed to gb27.....rom and modem or another job modem...just my thoughts...let me know how it goes..
Click to expand...
Click to collapse
So I did what you said. It only fixed it for a day. Only ##722136# works in Gb27 dialer. Before it didn't. Would I be able to install ICS dialer apk and not mess up the JB dialer. I might have to get a new phone if it keeps this up and if I do which phone should I get.
Sent from my SPH-D710 using xda premium
Jared King said:
So I did what you said. It only fixed it for a day. Only ##722136# works in Gb27 dialer. Before it didn't. Would I be able to install ICS dialer apk and not mess up the JB dialer. I might have to get a new phone if it keeps this up and if I do which phone should I get.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i dont think the ics dialer idea would work...you can keep trying different modems and see what happens or tell sprint that they suck and demand an airave..they will probaly charge you for it..
As for which phone to get...there is no way for me to answer that man...But i'll tell you this. When i get my next phone it will be the water/dust resistent S4..But i dont see a new phone helping the signal..
You could change you're prl to a roaming one..there are guides here and there online..But this only works for sprint not boost..If you're on sprint..a custom prl would be my move..
Gil81 said:
i dont think the ics dialer idea would work...you can keep trying different modems and see what happens or tell sprint that they suck and demand an airave..they will probaly charge you for it..
As for which phone to get...there is no way for me to answer that man...But i'll tell you this. When i get my next phone it will be the water/dust resistent S4..But i dont see a new phone helping the signal..
You could change you're prl to a roaming one..there are guides here and there online..But this only works for sprint not boost..If you're on sprint..a custom prl would be my move..
Click to expand...
Click to collapse
Signal isn't the problem. I have 2 sprint towers in my area closest one is 1/4-1/2 mile down the road from my house.
Sent from my SPH-D710 using xda premium
Oh yeah and I am on sprint
Sent from my SPH-D710 using xda premium
Jared King said:
Oh yeah and I am on sprint
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
well..then before you go flashing a custom prl and having sprint freak if you use to much roaming data..lol
I would odin a one-click back to stock rooted ics...you might have something left over from rom flashes messing with you're signal. Make sure you back everything up on you're pc...because you need to use the wipe data one-click..i think its called ''no data''. I'll look to make sure.
edit..nope. Its full restore...not nodata..im a dummy..
Gil81 said:
well..then before you go flashing a custom prl and having sprint freak if you use to much roaming data..lol
I would odin a one-click back to stock rooted ics...you might have something left over from rom flashes messing with you're signal. Make sure you back everything up on you're pc...because you need to use the wipe data one-click..i think its called ''no data''. I'll look to make sure.
edit..nope. Its full restore...not nodata..im a dummy..
Click to expand...
Click to collapse
Ya know I'm not trying to annoy you dude. But screw it I'll just use a different app for SMS for now. I'm just gonna save up for a new phone. And get a job at the sprint store right by my highschool lol. Employees get new phones for free.
Sent from my SPH-D710 using xda premium
Jared King said:
Ya know I'm not trying to annoy you dude. But screw it I'll just use a different app for SMS for now. I'm just gonna save up for a new phone. And get a job at the sprint store right by my highschool lol. Employees get new phones for free.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
lol..im not annoyed...hope you get it worked out...
Sorry..i seen you have signal now..ive been jumping around and helping others in about 3 different forums. If you're problem is just sms or mms. I would wipe the cache for the sms app in app manager. Then boot to recovery and wipe cache and dalvik cache.Reboot. If it is still wonky..try checking you're apn settings..if they are wrong.change them and reboot.
Should I just look online to see if they're wrong.
Sent from my SPH-D710 using xda premium

[ROM][STOCK][CWM][ROOTED][DEODEXED]Galaxy S III(SPH-L710)(Boost) MD7

This is a stock MD7 for the Boost Variant of the Samsung Galaxy S III, with SuperSU andBusybox installed. Apks are also zipaligned. This will not install a modem and should not wipe your device. This was built from the Samsung Official MD7 build.
Thanks to Smith058 for the find, and for letting me use it to cook with.Link to his OPhttp://androidforums.com/boost-mobile-galaxy-s3-all-things-root/753772-odin-backup-sph-l710_md7-stock.html
Thanks also to Google and XDA, for obvious reasons
Kennyglass123 - For posting guidance and all the awesome moderating he does around town
Stryke_the_Orc - For believing in me, for being a great friend and mentor, and always pushing me to do more
Garwynn - For teaching me something new almost daily, and for helping me bring more Boost support to this phone
If I have forgotten someone, please, please, let me know. I am all for giving credit where it is due.
Disclaimer: I am not responsible for whatever you do with your phone. Please flash at your own risk
Download Link:
Stock Rooted
http://www.androidfilehost.com/?fid=23159073880935958
Stock Rooted Deodexed
http://www.androidfilehost.com/?fid=23212708291678188
Flashing Instructions:
This will NOT flash a modem. If you are coming from stock MD7, you will keep MD7. Same goes for whatever baseband you have right now!
1. Download zip to your sdcard
2. Reboot into CWM, TWRP, or other compatible recovery(I used CWM 6.0.3.1 Touch)
3. Wipe Data, Cache, Dalvik
4. Flash zip
5. Reboot
6. Profit
Issues:
I do not claim to be the expert on anything, especially development issues. If you notice issues, please let me know. And if you have a solution to one of the issues I've found, please, by all means, post it and you'll get the credit. Enjoy
Note: It seems when rebuilding this to fix the issues above, I've lost the "rising orange Bs" boot animation. There's still boot-up sound, and the blue Samsung animation, but no Boost-specific. If you want it, you can get it from the previous build If I get time, I'll add it back in manually, but frankly, I like not having it there, it seems to boot a little faster
XDA:DevDB Information
Galaxy SIII(Boost) Stock ROMS, a ROM for the Sprint Samsung Galaxy S III
Contributors
jdsingle76
ROM OS Version: 4.1.x Jelly Bean
Based On: Official Kies
Version Information
Status: Stable
Created 2013-10-11
Last Updated 2013-11-17
Reserved for OP
NIce! Thanks for getting some straight up Boost files posted over here. I hope this is just the beginning.
wetbiker7 said:
NIce! Thanks for getting some straight up Boost files posted over here. I hope this is just the beginning.
Click to expand...
Click to collapse
Definitely just the beginning. More to come my friend
Sent from my SPH-L710 using xda premium
OP updated :thumbup:
Sent from my SPH-L710 using xda premium
A little confused.
Is this for Boost or Sprint? Will Sprint users see Boost logos and such? Or is this for people who are trying to use a Boost phone on Sprint service or vice versa?
Trident said:
A little confused.
Is this for Boost or Sprint? Will Sprint users see Boost logos and such? Or is this for people who are trying to use a Boost phone on Sprint service or vice versa?
Click to expand...
Click to collapse
It's for the Boost Mobile Galaxy s3. Boost has their own variant of the s3 like other carriers now.
Sent from my SPH-L710 using xda app-developers app
Trident said:
A little confused.
Is this for Boost or Sprint? Will Sprint users see Boost logos and such? Or is this for people who are trying to use a Boost phone on Sprint service or vice versa?
Click to expand...
Click to collapse
Notorious is correct. It's for the Boost variant of the S3. And to answer your second question, yes, it will flash Boost logo, mmsc url, etc.
Sent from my SPH-L710 using xda premium
Notorious said:
It's for the Boost Mobile Galaxy s3. Boost has their own variant of the s3 like other carriers now.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Glad I asked.
I'd guess that it wouldn't work well on my Sprint phone.
Trident said:
Glad I asked.
I'd guess that it wouldn't work well on my Sprint phone.
Click to expand...
Click to collapse
Actually, it'll work just fine. It'll just have Boost signature and mmsc url. Just like Boost and VM users have to change mmsc url, you would have to as well, I think. I say that, because if you check mmsc urlv on this rom, it actually reads "not set." I would be interested to see if mms would send and receive on other carriers with it saying "not set."
Sent from my SPH-L710 using Tapatalk now Free
Quick ? JD, does my Sprint S3 will have to be on the same MD7(since it was base on that one) or can it be on a different one...i.e newer/older version.
Trident said:
Glad I asked.
I'd guess that it wouldn't work well on my Sprint phone.
Click to expand...
Click to collapse
yes it work a few files need some Modification .... Modify the boost rom MG2 working on Sprint GS3
SilverTigre2010 said:
Quick ? JD, does my Sprint S3 will have to be on the same MD7(since it was base on that one) or can it be on a different one...i.e newer/older version.
Click to expand...
Click to collapse
I'm not sure I understand your question. If you're referring to your modem, then no, it doesn't have to be MD7. This is a Boost build, so you may have to change your mmsc url to get mms
Sent from my SPH-L710 using XDA Premium 4 mobile app
jdsingle76 said:
This will not install a modem and should not wipe your device.
Click to expand...
Click to collapse
So I will not lose any apps or anything if of course I don't do a total wipe I mean?
I did a nandroid just encase but wondered if it would just do the "android is updating" after installing thus all apps would be untouched.
I flashed it once I had some time it kept nagging about wanting to upgrade and was very laggy and slow compared to blazer I was running not ready to be a daily for me at least not till I have some time to remove all the bloat.
Carfanatic said:
I flashed it once I had some time it kept nagging about wanting to upgrade and was very laggy and slow compared to blazer I was running not ready to be a daily for me at least not till I have some time to remove all the bloat.
Click to expand...
Click to collapse
Hmmm, that's the first I've heard of that. This rom is completely stock, but yes, not debloated. I just installed es file explorer and deleted all the crap it comes with. And for the other poster, this will not wipe everything if you do a dirty flash. And I'm using it as my dd with zero issues.
Sent from my SPH-L710 using XDA Premium 4 mobile app
jdsingle76 said:
I'm not sure I understand your question...
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You got it, thanks. Working great, flashed 3 already.
SilverTigre2010 said:
You got it, thanks. Working great, flashed 3 already.
Click to expand...
Click to collapse
Glad to hear it. I have the MG2 tar as well. Anyone interested in a deodex/debloat of that? And silver, how's the build working for you?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Status
Over 300 downloads, thanks everyone! I haven't heard any feedback, so I'm assuming it is working ok. Let me know!
I'm wondering is this ROM a daily driver or are there any kinks that anyone can report on.
Sent from my SPH-L710 using XDA Premium 4 mobile app

Signal shuts off when on standby

I've searched this before on google and found a similar thread but only the data shut off for that person... I completely lose signal though whenever i flash a custom rom and go on standby... works perfectly fine on stock but if I try hyperdrive or wicked (only 2 I've attempted) and i shut the screen off the whole signal disappears but reappears a second or 2 after I turn it back on. Any idea what the problem can be? I've tried both CWM and TWRP and both have the same results, I've tried reflashing the radio also to no avail... I hate stock roms someone help plz lol
What's your baseband version? Are you still on the MDL bootloader? If so you need to flash the mk2 baseband for your data to work. Go to settings about device and check your baseband version. I'll let you know more one we know what version you have.
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
What's your baseband version? Are you still on the MDL bootloader? If so you need to flash the mk2 baseband for your data to work. Go to settings about device and check your baseband version. I'll let you know more one we know what version you have.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
MDL i guess, M919UVUAMDL
my data works though... the issue is that on standby all cell signal drops not just data but everything i get the cancel sign.
ps. I found a thread with the MK2 baseband.. but apparently theres 1 for GSM and a seperate LTE file.. do i flash both? how does that work?
killaray said:
MDL i guess, M919UVUAMDL
my data works though... the issue is that on standby all cell signal drops not just data but everything i get the cancel sign.
ps. I found a thread with the MK2 baseband.. but apparently theres 1 for GSM and a seperate LTE file.. do i flash both? how does that work?
Click to expand...
Click to collapse
Only flash the modem.bin file.
☞ Sent from here☜
killaray said:
MDL i guess, M919UVUAMDL
my data works though... the issue is that on standby all cell signal drops not just data but everything i get the cancel sign.
ps. I found a thread with the MK2 baseband.. but apparently theres 1 for GSM and a seperate LTE file.. do i flash both? how does that work?
Click to expand...
Click to collapse
Yes only flash the modem.bin! Do not flash the bootloader or you will void your warranty. Make sure the files you flash are for the SGH-M919. After you flash the modem.bin make sure that it sticks check your baseband again and make sure it says mk2. Sometimes you have to flash the modem more than once for it to stick.
Sent from my SGH-M919 using xda app-developers app
all set guys, appreciate the assistance thank you both
Feel as if my service has suffered since the flash, is mk2 known to have service issues compared to MDL? If not would a possible kernel flash possibly rectify the issues I'm perceiving?
killaray said:
Feel as if my service has suffered since the flash, is mk2 known to have service issues compared to MDL? If not would a possible kernel flash possibly rectify the issues I'm perceiving?
Click to expand...
Click to collapse
At the beginning there was issues. It was mostly kernel related. I am on dbombrom from dannyben and have never had an issue. You should give it a try it's pretty awesome. http://forum.xda-developers.com/showthread.php?t=2611442
Sent from my SGH-M919 using xda app-developers app
I need to revert to mdl if im gonna be able to try anything. .. This connection is horrible and I'm out of the country so I have no access to Internet besides my phone unless I go wifi hunting
killaray said:
I need to revert to mdl if im gonna be able to try anything. .. This connection is horrible and I'm out of the country so I have no access to Internet besides my phone unless I go wifi hunting
Click to expand...
Click to collapse
Dbombrom will fix your data drop issue. If you don't want to try that now I suggest you flash the latest kt kernel just Google it and flash the late one for M919 android 4.3 it may also fix your issue.
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
Dbombrom will fix your data drop issue. If you don't want to try that now I suggest you flash the latest kt kernel just Google it and flash the late one for M919 android 4.3 it may also fix your issue.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I'm on stock now, but when i was on wicked it had the kt kernel default and was the same if not worse than stock... the issues isnt that i dont wanna dl dbomb its that i cant with this horribly slow connection lol... you wouldnt by any chance have a link to mdl modem so i can revert back and start from the top?
killaray said:
I'm on stock now, but when i was on wicked it had the kt kernel default and was the same if not worse than stock... the issues isnt that i dont wanna dl dbomb its that i cant with this horribly slow connection lol... you wouldnt by any chance have a link to mdl modem so i can revert back and start from the top?
Click to expand...
Click to collapse
found mdl hopefully i can flash back... if so ill try out dbomb and hopefully that'll work for me... if not ill have to stay stock till i get to the states... custom roms dont seem to play well outside the country lol
killaray said:
found mdl hopefully i can flash back... if so ill try out dbomb and hopefully that'll work for me... if not ill have to stay stock till i get to the states... custom roms dont seem to play well outside the country lol
Click to expand...
Click to collapse
Now that I think about you being out of the states it may be that your APN configuration has to be different for the country you're in. I don't know why I didn't think about it.
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
Now that I think about you being out of the states it may be that your APN configuration has to be different for the country you're in. I don't know why I didn't think about it.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
na its definitely not an APN issue.. it sets itself automatically and the internet works... just on MK2 for some reason its horrible im back on MDL and it works 100%.... gonna try the update 2 more times 1 with dbomb like u recommended and then with hyperdrive which i really liked... if they dont work ill stick to stock till i get back to the states
killaray said:
na its definitely not an APN issue.. it sets itself automatically and the internet works... just on MK2 for some reason its horrible im back on MDL and it works 100%.... gonna try the update 2 more times 1 with dbomb like u recommended and then with hyperdrive which i really liked... if they dont work ill stick to stock till i get back to the states
Click to expand...
Click to collapse
Good deal! I used hyperdrive and wicked but I gotta be honest with you dbomb is the bomb you won't regret it!! Don't hesitate to ask if you have any questions.
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
Good deal! I used hyperdrive and wicked but I gotta be honest with you dbomb is the bomb you won't regret it!! Don't hesitate to ask if you have any questions.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Got it goin finally... flashed mk2 first then flashed hyperdrive all is fine and dandy... getting 700kb/s consistently which is great out here
killaray said:
Got it goin finally... flashed mk2 first then flashed hyperdrive all is fine and dandy... getting 700kb/s consistently which is great out here
Click to expand...
Click to collapse
Awesome!!
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
Awesome!!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your assistance
Anytime. Glad you got it working.
Sent from my SGH-M919 using xda app-developers app

Categories

Resources