[OTA Update] Touchwiz 4.3 T-Mobile NOW available! MJC. - T-Mobile, Samsung Galaxy SIII

So my mother's non-rooted stock UVDMD5 S3 was sitting there and mobile background said update checker used 3 kb, so I checked the update checker and a 527.00 MB file started downloading. Just a heads up, is it the new download?
Edit 1 : Confirmed, this is Android 4.3 official.
FunMuscle said:
Confirmed. Kernel version 3.0.31-1962493, Produced October 31.
Click to expand...
Click to collapse
Edit 2 : @DocHoliday77 has confirmed this actual OTA is ONLY for the SGH-T999..if you don't have one (you won't get the OTA) but DO NOT FLASH OR ATTEMPT TO FLASH ANY ODIN FILES!
Edit 3 : This has KNOX. Proceed at caution.
Edit 4 : have you ever been to jail? No? Me either. But if I had to picture it this update is much like it. Still to Docs leak thread or AOSP but don't touch this with a fine toothcomb if you want to root and later downgrade.

TheLastSidekick said:
So my mother's non-rooted stock UVDMD5 S3 was sitting there and mobile background said update checker used 3 kb, so I checked the update checker and a 527.00 MB file started downloading. Just a heads up, is it the new download?
Edit : still not downloaded yet. The download is slow I may not know what the update was until 4 PM because she's going to work right now.
Click to expand...
Click to collapse
Downloading now, will advise in 40 minutes. However, there's only one thing it could be... 4.3.

FunMuscle said:
Downloading now, will advise in 40 minutes. However, there's only one thing it could be... 4.3.
Click to expand...
Click to collapse
Thanks! Proceed at your own risk, for I cannot be sure current method of root will continue to work on 4.3 ...

TheLastSidekick said:
Thanks! Proceed at your own risk, for I cannot be sure current method of root will continue to work on 4.3 ...
Click to expand...
Click to collapse
One way to find out, I suppose. I'm not currently rooted, the phone's bone-stock. Saw the download and immediately came here to see what was going on. Under 30 megs remaining.

check samfirmware...theres an update with over 800 mb

I guess that's a confirmation. Any issues? The AT&T version was riddled with problems.
Edit- Confirmed. Kernel version 3.0.31-1962493, Produced October 31.

According to Kies the update is MJC so its probably the same or similar to leak version DOC post .
Sent from my SM-T210R using xda app-developers app

Nice to see T-Mobile being the first to release 4.3. I will definitely check it out when I get home today.
Sent from my SGH-T999 using Tapatalk

So does this include the kernel that we were missing for 4.3?
Powered by the SGSIII

ThC23 said:
So does this include the kernel that we were missing for 4.3?
Powered by the SGSIII
Click to expand...
Click to collapse
Yes sir.

TheLastSidekick said:
Yes sir.
Click to expand...
Click to collapse
Cool! I'd say something like, "Hopefully, we'll should see a rooted version soon...", but this is XDA where it's definitely possible.

awww man!!!! and i cant play! lol!
seriously though, this is awesome! im bout to download in a min. will then upload to AFH so you guys dont have to wait on that blazing fast Hotfile!
will post more info in a few...
but yes, its the same as my leaked build, can anyone confirm if i was correct and knox is NOT included?
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2

anyone have any issues with the update? I saw on engadget that some other carriers pulled the update due to problems

Can someone upload a rooted Odin package, please!
If possible, if not without root.
Thanks
Powered by the SGSIII

Ok, something important to be aware of. From piecing information together from users around these and other forums, it appears just about everyone who had problems with the 4.3 update had updated via OTA. So if you choose to update this way, please let us know how things go. But if you do experience problems, DONT PANIC, Grab Your Towel, and start downloading the Odin flashable full firmware update.
This of course will include the T-Mobile kernel. I am 90% certain that the reason WiFi did not work with the leaked kernel is because we did not flash the full firmware update. I believe the WiFi modules needed to be built into the bootloader (likely the aboot partition to be exact). This is what I was attempting to confirm when I bricked my phone. So by flashing the full firmware/OTA update, you should have a fully working build, including WiFi if I am correct.
Aside from this, I would suggest reading through some of my posts in the leaked Rom threads. This is the same build that was leaked to us a week or so ago. Do let me know how things are going, I wish I could join you guys in the discovery phase of this "official" version, but I seriously doubt that other than the kernel working, and Knox likely being left out, it will be any different from what we have been using.
I do not see any reason you should not be able to root, but I will get an insecure kernel posted asap. As soon as my download finishes. In the meantime, if anyone wants the insecure kernel from the leaked build, it should be exactly the same one. Download here:
UVUEMJC_Insecure_kernel.zip
Hope everything goes well, and I am still here to help!
---------- Post added at 10:34 AM ---------- Previous post was at 10:31 AM ----------
ThC23 said:
Can someone upload a rooted Odin package, please!
If possible, if not without root.
Thanks
Powered by the SGSIII
Click to expand...
Click to collapse
a root66 version will be coming soon. These have always been released within a day of us getting a new official release. Please be patient though, as I don't think mrRobinson has the S3 anymore. I will send him the download link as soon as I have it posted on my AFH account.
If he cannot get to it, i will do my best to get you guys a root66 build asap. But again, please be patient.
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
You know, I have to be honest....I was hoping to be wrong about the latest leak becoming our official build! Was hoping they would update one more test build first, then we would have had another kernel/modem/build......oh well! I must say that I am quite surprised they went through with our release so quickly!
Someone must be watching us......

Thanks Doc, I'm in no rush.
Thanks for all your help, great appreciated.
Powered by the SGSIII

oh, one more thing. if updating via ota, try Voodoo OTA Roitkeeper from the store. its worked in the past to preserve root.
and can someone pull the ota before applying it, and upload it for me please?
look in /data/fota, /data/temp, /cache/fota
its there somewhere, just cant remember for certain.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2

Where can you get an Odin package without root? My doesn't care about root but would still like an solid update incase the ota has bugs
Sent from my SGH-T999 using xda app-developers app

Supamike88 said:
Where can you get an Odin package without root? My doesn't care about root but would still like an solid update incase the ota has bugs
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
samsung–updates.com
sammobile.com
sammobile requires registration.
if you want to wait a few i will have it posted in my firmware thread where you can download it MUCH faster. hotfile takes a while.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2

I'm bone stock rooted and software update complained about software being modified. Can someone confirmed that the T999L AND T999 are being updated.

Related

Theres a new OTA @ sammobile.com?

Anyone see this? T999UVALI1 released in September. Seems to be only 7.4mb.
http://www.sammobile.com/firmware/?page=3&model=SGH-T999&pcode=TMB&os=1&type=1#firmware
stevessvt said:
Anyone see this? T999UVALI1 released in September. Seems to be only 7.4mb.
http://www.sammobile.com/firmware/?page=3&model=SGH-T999&pcode=TMB&os=1&type=1#firmware
Click to expand...
Click to collapse
Beat me to it! Downloading now to try it out
This will break root! Make sure you use ota rootkeeper before installing this update!
Baseband is now T999UVLI1
Kernals build date is Sat Sept 1
Build number is IMM76D.T999UVALI1
good stuff thanks bro
My pleaseure! Not seeing much difference in anything, which I guess is to be expected being only 7 megs. Must just be updated kernel and modem, which is OK with me.
Were you able to flash or did you have stock recovery
Stock recovery, and yes it flashed fine for me.
stevessvt said:
Baseband is now T999UVLI1
Kernals build date is Sat Sept 1
Build number is IMM76D.T999UVALI1
Click to expand...
Click to collapse
You installed this over ICS or JB?
Sent from my SGH-T999 using xda premium
ICS. It must be T999UVALH2 installed with stock recovery.
stevessvt said:
ICS. It must be T999UVALH2 installed with stock recovery.
Click to expand...
Click to collapse
Thanks! My phone seems to love "G" on JB despite the fact that i always had "4G" here. Oh well, guess I will have to wait for the next JB leak.
Sent from my SGH-T999 using xda premium
Used mobile odin to flash stock recovery then the ota. Kept root that way
Or, alternatively, just download OTA rootkeeper and it will reaply root after the update.
Hey fellas any way I could grab this from you I'm on uvalh2 with h3 rsdio and would love to try this out and would super user elite root keeper work for this? This is a radio I assume?
Thanks fellas:thumbup:
Sent from my SGH-T999 using xda premium
---------- Post added at 11:32 AM ---------- Previous post was at 11:06 AM ----------
Was trying to register so I can just download from samfirmware but the registration page stays blank I dont have a pc maybe a cwm flashable of this will come out.
Thanks.
Sent from my SGH-T999 using xda premium
here you go.....dawgboy i guess u have to be complete stock including stock recovery this calls for UVALH2 this is only a little over 7 mb i assume u have to change the file name to update.zip once its on your phone then flash in stock recovery. remeber complete stock or it will fail!....enjoy:}
also make sure u have the uvalh2 radio installed like i said everything has to be from uvalh2 including kernel. before installing this very small incremental update
sarni84 said:
also make sure u have the uvalh2 radio installed like i said everything has to be from uvalh2 including kernel. before installing this very small incremental update
Click to expand...
Click to collapse
Thanks sarni is this some minor code that updates uvalh2 baseband or kernel just wondering and did you see any improvements? also is it ok that I asked wildchild if he could make a cwm of this, again thank you sarni for this I tried and tried to reg with samfirmware from my t999 must be browser issues and I don't have a pc.
Thank you.
Sent from my SGH-T999 using xda premium
honestly have not downloaded it im on aokp right now lol but i think op describes what this update does i think its just radio and maybe a few minor things i mean cant be much it is only 7 mb lol and i am sure wildchld is on top of it already
edit...i guess op does not describe what this update does. just be careful and make a back up u know the routine brotha
sarni84 said:
honestly have not downloaded it im on aokp right now lol but i think op describes what this update does i think its just radio and maybe a few minor things i mean cant be much it is only 7 mb lol and i am sure wildchld is on top of it already
edit...i guess op does not describe what this update does. just be careful and make a back up u know the routine brotha
Click to expand...
Click to collapse
You got it man already got a nandroid just because you never know lol! Thanks again man have a good holiday and eat lots of BBQ and wash it down with cold beeer! :beer: :beer:
Sent from my SGH-T999 using xda premium
yea man same to u ill have a little something to go in combination with my coronas:silly:
thats after i do this huge paper in my software development class

[Q] cannot root galaxy s3 i747 4.3

Sir I updated my galaxy s3 i747 with leaked firmware 4.3 with no knox.
It has unrooted my phone.
When I try to root my phone again.
I cannot root it.
And im having a battery problem.
It drains very fast.
Which ROM did you flash? You have the s3 from AT&T?
deepgrewal2 said:
Sir I updated my galaxy s3 i747 with leaked firmware 4.3 with no knox.
It has unrooted my phone.
When I try to root my phone again.
I cannot root it.
And im having a battery problem.
It drains very fast.
Click to expand...
Click to collapse
try cf-auto root first, that doesnt help
look for the official 4.3 stock rom for i747 flash it then root with cf-auto root, see if that works
sorry am too laxy to find it, am sure its somewhere on this threads :laugh:
winosxbuntu said:
try cf-auto root first, that doesnt help
look for the official 4.3 stock rom for i747 flash it then root with cf-auto root, see if that works
sorry am too laxy to find it, am sure its somewhere on this threads :laugh:
Click to expand...
Click to collapse
I've never seen an official AT&T stock 4.3 ROM. I know AT&T released 4.3 as an OTA update but don't think they released a full ROM.
deepgrewal2 said:
Sir I updated my galaxy s3 i747 with leaked firmware 4.3 with no knox.
It has unrooted my phone.
When I try to root my phone again.
I cannot root it.
And im having a battery problem.
It drains very fast.
Click to expand...
Click to collapse
audit13 said:
I've never seen an official AT&T stock 4.3 ROM. I know AT&T released 4.3 as an OTA update but don't think they released a full ROM.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2387423 http://forum.xda-developers.com/showpost.php?p=46804338
this two links provide 4.3 stock updates and developer @designgears pulled the official or the 4.3 update/firmware from AT&T, hope that can answer your question
winosxbuntu said:
http://forum.xda-developers.com/showthread.php?t=2387423 http://forum.xda-developers.com/showpost.php?p=46804338
this two links provide 4.3 stock updates and developer @designgears pulled the official or the 4.3 update/firmware from AT&T, hope that can answer your question
Click to expand...
Click to collapse
Aren't those are re-packaged ROMs rather than being a complete 4.3 ROM similar to Rogers/Bell/Telus ROMs? To install, you have to Odin back to a stock rom or TW-based ROM.
audit13 said:
Aren't those are re-packaged ROMs rather than being a complete 4.3 ROM similar to Rogers/Bell/Telus ROMs? To install, you have to Odin back to a stock rom or TW-based ROM.
Click to expand...
Click to collapse
am sure there is an official firmware from at&t and its hidden in this threads or somewhere on the net plus i was on a 4.1.2 stock, i dont like leaks just the official cleaned out so i did not have any problems with bootloaders/updating etc....... did not bother to use odin just flashed with CMW and everything worked
edit: devs need the official firmware from AT&T to work on , without it they have nothing (assuming you already know that)
winosxbuntu said:
am sure there is an official firmware from at&t and its hidden in this threads or somewhere on the net plus i was on a 4.1.2 stock, i dont like leaks just the official cleaned out so i did not have any problems with bootloaders/updating etc....... did not bother to use odin just flashed with CMW and everything worked
edit: devs need the official firmware from AT&T to work on , without it they have nothing (assuming you already know that)
Click to expand...
Click to collapse
AT&T did not release an official Odin tar for 4.1.2 or 4.3 it would be great if they did but they haven't and don't have any plans to do so.
Even without the tar files I think our developers have done a great job.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Agreed. The devs worked directly from the OTA. They never had the official firmware, as they all will tell you. You're not going to find it here or anywhere on the net.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
winosxbuntu said:
http://forum.xda-developers.com/showthread.php?t=2387423 http://forum.xda-developers.com/showpost.php?p=46804338
this two links provide 4.3 stock updates and developer @designgears pulled the official or the 4.3 update/firmware from AT&T, hope that can answer your question
Click to expand...
Click to collapse
I understand the devs had to re-create the ROM. My point was that these aren't stock, but they are certainly good to have around
shortydoggg said:
Agreed. The devs worked directly from the OTA. They never had the official firmware, as they all will tell you. You're not going to find it here or anywhere on the net.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AT&T released official for 4.1.2 , dont know what happned with 4.3 but blame Samsung cuz after 4.1.1 S3's update, updates went down from there ........4.1.2 update was great, 4.3 being a WTF and no 4.2.2 .........but am optimistic that 4.4 is coming for S3's and never will CM/AOKP/PARANOID roms forsake the S3 it will have 5+ versions
winosxbuntu said:
AT&T released official for 4.1.2 , dont know what happned with 4.3 but blame Samsung cuz after 4.1.1 S3's update, updates went down from there ........4.1.2 update was great, 4.3 being a WTF and no 4.2.2 .........but am optimistic that 4.4 is coming for S3's and never will CM/AOKP/PARANOID roms forsake the S3 it will have 5+ versions
Click to expand...
Click to collapse
So since you allege AT&T released official firmware for 4.1.2(some other way than OTA) obviously my search skills aren't what they should be. Can you provide a link to backup your allegations?
Whether or not we get updates has little to do with Samsung and more to do with the service provider, and it is the service provider whom determines if we get an official copy released.
My thought is that AT&T is attempting to discourage us from customizing our devices. Some people have no business customizing anything and that can cause them to attempt to return their device under warranty. When the owner was the cause of the device failure that costs the provider money...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 08:07 PM ---------- Previous post was at 07:50 PM ----------
Btw I want to apologize to the OP here is a link to some roms that are pre rooted they're very close to stock with only minor differences mostly in its capabilities and some are debloated. These will get you rooted for sure, remove knox and should do what you want. I like the one from loserskater. This link below works only on the AT&T SGH-I747.
http://forum.xda-developers.com/showthread.php?t=2540998
once again I apologize for bickering in your thread while not even staying on topic.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Sprint update

I just read that T mobile is pushing out an update. Any word on sprints first update. Since im rooted I will not be able to take it. So we will have to wait for a dev to make it flashable. Is this correct? Or is there a way to still get it when sprint pushes one?
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
We will have to wait on a dev . Generally it's always fairly quick.
Sent from NOTE QUATRO
llawen said:
I just read that T mobile is pushing out an update. Any word on sprints first update. Since im rooted I will not be able to take it. So we will have to wait for a dev to make it flashable. Is this correct? Or is there a way to still get it when sprint pushes one?
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
Click to expand...
Click to collapse
Use Xposed to make your device 'Official' and make sure software update isnt frozen.
....
Ok just installed xposed. Where do I find the setting to do this. Thanks for your help
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
Also can I be on a custom rom. Or do I need to be stock rooted. Thanks again
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
llawen said:
Also can I be on a custom rom. Or do I need to be stock rooted. Thanks again
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
Click to expand...
Click to collapse
Im on stock rooted. Go to download and install Wanam Xposed Module.
Naturally itll be in the last category, Security Hacks.
You're gonna wanna edit the build.prop to get rid of the light lag.
Near the bottom
>ro.securestorage.support=true< change to false
I'm kind of in the same position
So I have to flash the update in odin whenever it's available?
Ok I got it to work on bonsei rom. Not sure of taking an update on Bonsei. Any input? When an update does roll out, Im assuming I need to be stock. Love to hear from the devs if taking an update on bonsei is possible.
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
llawen said:
Ok I got it to work on bonsei rom. Not sure of taking an update on Bonsei. Any input? When an update does roll out, Im assuming I need to be stock. Love to hear from the devs if taking an update on bonsei is possible.
AS FOR ME.....GIVE ME LIBERTY OR GIVE ME DEATH
Click to expand...
Click to collapse
If an update does rollout. I'm pretty sure Bonsei will get updated to the latest update.
Silly me I thought Sprint finally updated our devices so we can extend our battery life and whatever else t-mobile got. But yes you can use the mod to spoof offical or just wait for a rom to include it or just odin back to stock and reroot once it arrives
---------- Post added at 08:35 PM ---------- Previous post was at 08:32 PM ----------
gfp11289 said:
I'm kind of in the same position
So I have to flash the update in odin whenever it's available?
Click to expand...
Click to collapse
You can just do as Starbucks suggested it will spoof the phone to offical so you can take the update
Androidwarrior said:
If an update does rollout. I'm pretty sure Bonsei will get updated to the latest update.
Click to expand...
Click to collapse
That's correct, once I see an official TAR the Stockish Bonsai ROM will be updated.
Uniquebarbee said:
Silly me I thought Sprint finally updated our devices so we can extend our battery life and whatever else t-mobile got. But yes you can use the mod to spoof offical or just wait for a rom to include it or just odin back to stock and reroot once it arrives
---------- Post added at 08:35 PM ---------- Previous post was at 08:32 PM ----------
You can just do as Starbucks suggested it will spoof the phone to offical so you can take the update
Click to expand...
Click to collapse
But this would only work if you have the stock recovery right?
DarkManX4lf said:
But this would only work if you have the stock recovery right?
Click to expand...
Click to collapse
If you use xposed it does not matter if you use a custom recovery the Dev will include it eventually. You could go the stock route also just backup your things

Lollipop appears to be out for AT&T Note 4

Currently "Processing....." a update. Will post back more soon.
flaystus said:
Currently "Processing....." a update. Will post back more soon.
Click to expand...
Click to collapse
Yup, shows for me too, 1161MB update.
Hmm, decision time. A root for the current setup does seem like it's within reach...
Turns out this should probably be merged with the general lollipop thread though, because others are posting their updates there.
Well cool nice to kno we got the update... but I'm waiting... seems we r close to root on 4.4.4 plus b4 I update I want to kno if we r able to downgrade back down to 4.4.4 with Odin if we wanted ? And also I would like to kno the issues?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Can you share a screenshot? Whether it's of update going on or after it, of the about phone screen?
Would if I could. It was like almost an hour before my update actually started downloading and I'm just now on 400mb of 1.3ish gb.
Lollipop?
Can anyone confirm if this is the Lollipop update? I started the download too but it is going very slow.
---------- Post added at 09:36 AM ---------- Previous post was at 09:32 AM ----------
flaystus said:
Would if I could. It was like almost an hour before my update actually started downloading and I'm just now on 400mb of 1.3ish gb.
Click to expand...
Click to collapse
How are you checking how much of the download you have?
If it says "Processing" its not started yet. Once the download begins you can see the progress.
flaystus said:
If it says "Processing" its not started yet. Once the download begins you can see the progress.
Click to expand...
Click to collapse
It says "Downloading software update, Please do,.." in my notifications area....I tap it and nothing. If I go to "Check for Updates" in the settings and tap it it just takes me back to the "About Device" screen.
See this thread
http://forum.xda-developers.com/note-4-att/general/lollipop-note-4-due-soon-t2913780/page42
My phone is downloading the update as we speak. ~1100MB
Confirmed
Downloading with 200mb/1160mb progress.
If you all don't see the reply button on Tapatalk latest version 4.12.0 Uninstall then install again and it fixes issues.
Running On Deadly Venom Note 4 v1.1
Anyone have a zip file of the ota yet? My friend is trying to port an int rom to tmobile since they are lagging on an ota. He thinks the att will work. Thanks in advance. Pm me if you can
Sent from my SM-N910T using XDA Free mobile app
Super slow DL - at 665 mb
i cant believe its finally here.. and before the launch of the s6 too..
lacz713 said:
i cant believe its finally here.. and before the launch of the s6 too..
Click to expand...
Click to collapse
confirmed that it's here.. Took me over an hour to download..
version 5.0.1
donnyp1 said:
Anyone have a zip file of the ota yet? My friend is trying to port an int rom to tmobile since they are lagging on an ota. He thinks the att will work. Thanks in advance. Pm me if you can
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
Would they need root to pull the ota or can it be done through kies? I don't think att note 4 has root
mbonus said:
Would they need root to pull the ota or can it be done through kies? I don't think att note 4 has root
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2188158
karmandk said:
http://forum.xda-developers.com/showthread.php?t=2188158
Click to expand...
Click to collapse
Thanks for the link, so def needs root to pull ota
Is there any way to manual ipdate. Keep getting errors and increasing time.

New OGA update rolling out. Stagefright fixer!

Would you update your device to fix the Stagefright? Or would skip the update because you want root? Let's hope the current root trick works on this one.
Full build no. G920PVPU2BOGA.
Via
itskapil said:
Would you update your device to fix the Stagefright? Or would skip the update because you want root? Let's hope the current root trick works on this one.
Full build no. G920PVPU2BOGA.
Via
Click to expand...
Click to collapse
This issues has been around for awhile so i would wait to see what the developers do
I'm not rooted so I just downloaded this 53mb update and it's applying now. Actually advises that it's a security fix for Stagefright and nothing else. It has finished applying in the time I've been typing this and just rebooted, but it has to go through the app optimizing. It jumped up to 224 of 348 quick enough, but the time consuming wait for the rest of them. Tick, tock...
Downloaded and am installing now.
I installed this update did not notice anything else changed. For some reason the s6 stagefright fix was only around 50MB while the S5 was close to 300MB, and the only thing claimed to be fixed in the s5 release notes was the same thing.
Updated, and screw root. Phone good enough to not need it.
Sent from my SM-G920P using Tapatalk
Saafir said:
It's never good enough to not have root hehe
Click to expand...
Click to collapse
What he ^^^^^ said!
Can someone give me an fast link to the OGA G920P or G925P firmware please? Or to the OTA zip.
So that I can rip the fixed stagefright lib files from it for my ROM.
Getting 1.2gb system RAM usage after the update. Hoping it's a tiny fix, it's a relief to have 600MB more free to do what I want with, was getting 1.8/1.9GB system ram usage before update.
Will post update in a few hours to see if this is still true.
Any root for it yet guys?
---------- Post added at 06:11 AM ---------- Previous post was at 05:51 AM ----------
So I was looking up where to get the kernel source code for the new oga update and Samsung has not released it yet.. I was thinking of trying to learn how to make a kernel myself for root
I updated then flashed unikernel v6 0001 in odin and twrp and am now rooted on stock OGA , just wish i could remove carrieriq and itson.
Sent from my SM-G920P using XDA Free mobile app
george241312 said:
Any root for it yet guys?
---------- Post added at 06:11 AM ---------- Previous post was at 05:51 AM ----------
So I was looking up where to get the kernel source code for the new oga update and Samsung has not released it yet.. I was thinking of trying to learn how to make a kernel myself for root
Click to expand...
Click to collapse
Update then use odin to flash unikernel v6-0001 and then the twrp both here in xda forums. i did this and have full root with no issues.
Can someone (who have rooted OGA) upload all stagefright lib files in /system/lib & /system/lib64 folders for me please?
So that I can make an Stagefright flashable fix for all S6 models/firmwares.
edgarf28 said:
Can someone (who have rooted OGA) upload all stagefright lib files in /system/lib & /system/lib64 folders for me please?
So that I can make an Stagefright flashable fix for all S6 models/firmwares.
Click to expand...
Click to collapse
Assuming the libs are the same for 920P and 925P, someone posted theirs for the 925P here.
edit - I don't know that they were rooted though.
fachadick said:
Assuming the libs are the same for 920P and 925P, someone posted theirs for the 925P here.
edit - I don't know that they were rooted though.
Click to expand...
Click to collapse
Ah thank you very much for this!! :good:
Will test them out on my G925F based ROM.
EDIT: Unfortunately they doesn't work on the F firmware
Everything is good after this update, but cent that the battery seems to be going down faster
Sent from my SM-G920P using XDA Free mobile app
waoasis said:
Everything is good after this update, but cent that the battery seems to be going down faster
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
If your still on stock kernel then battery does suck down quick
sent from rooted G920P on OGA
Tried unikernel v6 and failed
Tried, went through Ok, but when got to phone the screen wouldn't work. Wouldn't register finger. Buttons worked though. Idk
You tried the update or changing kernel?
sent from rooted G920P on OGA
Did update, then used the mentioned kernel. Pass in Odin, but when phone rebooted just the buttons where working. No touch screen

Categories

Resources