I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
The xtremeguard screen protectors are really good, and they can be found for under $2.
mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!
Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.
use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.
ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.
I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.
You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.
unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk
unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.
Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk
Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.
xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.
I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.
Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app
I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!
Related
I ordered those from eBay for around $15, they just arrived today. Tried to apply body protector first. Body protector is made out of 5 pieces and no matter how hard you would try to fit them, it's impossible to get them to stick nicely and not move. Started with the battery cover piece that's the largest and easiest to apply, it turned out to be just a little too big and when I put battery cover back on the of the phone, sides of the protector unglued and let the air under them which created bubbles. Tried side protector next, but that thing is impossible to fit. Gave up on the whole body protector and though to just apply screen protector and keep my gel case for now.
Screen protector is of the most horrible quality I've ever seen in my life! It's so grainy, it looks like my screen has a resolution of about 100x40 after application. More than that I'm not sure if it's because I used soaped water (as per instructions) or for some other reason, but parts of the screen-protector actually turned grey (against black background), some other parts are a bit clearer, but still, grain kills the whole thing. Ripped it off and will be waiting for some better screen-protectors to show up on the market.
Don't waist your money on those.
Great I just ordered one a few days ago.
olieebur said:
Great I just ordered one a few days ago.
Click to expand...
Click to collapse
same here...
I almost ordered one but then I got the zagg screen only with 20% off. When I receive it I let you guys know.
Sent from my SAMSUNG-SGH-I897 using XDA App
LGSilva said:
I almost ordered one but then I got the zagg screen only with 20% off. When I receive it I let you guys know.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Same here
My Zagg should be here tomorrow
I ordered a similar protector from clearfreak (they were the only ones selling a protector for the captivate when I ordered about 10 days ago), and it came in the other day. While the material itself seemed about on par with the zagg protectors (I've used Zagg before), the screen protector was a bit too big, so theres a bubble going across the top where the protector wraps around the top of the phone.
I see that zagg has protectors now, so I guess I'll get one of those. They seem to have changed up their offerings a bit, they offer full body "maximum coverage" and "easy install"; can anyone tell me how difficult the maximum coverage protector is to apply? I've done a zagg full body install on my zune hd, so I understand that these things are a bit tricky to get on just right, but I want to know if the full body is significantly harder than the easy install one with a bit less coverage.
How is the touch screen after you put on the screen protector? I have had a few that really seemed to mess with the touch screen. It seemed like it took twice as much pressure for it to react.
Is that the case with the captivate as well?
Pmac25 said:
How is the touch screen after you put on the screen protector? I have had a few that really seemed to mess with the touch screen. It seemed like it took twice as much pressure for it to react.
Is that the case with the captivate as well?
Click to expand...
Click to collapse
Capacitive touchscreens aren't pressure sensitive, so protector or not, how hard you press shouldn't make a difference. That being said, I have a Zagg invisibleshield on my zune hd, and it hasn't affected the touch sensitivity at all.
I've used BodyGuardz and Zagg before. The one piece of advice I have is, instead of using the soaped water they give you, use isopropyl (rubbing) alcohol. It lets you slide the cover to the correct position very easily and will just evaporate out from under the cover, leaving no bubbles. I had a super clean install on my HTC Pure that way. To be safe I'd also remove the battery and make sure the phone has plenty of time to dry before you turn it on again. Also, if you enter ZAGG's weekly iPad giveaway thingy they have been giving out 40 and 50% off coupon codes.
I just got the AT&T screen protectors (pack of 3 for $10). I actiually got it for 5 (50% off through FAN account) and they are of good quality, clear and fit perfectly. There's even a cutout for the earpiece speaker and light and proximity sensors.
The two AT&T stores I went to did not have them but the AT&T smaller stores in the malls did.
I got the full body Invisible Gadget Guard, and mine looks fine. I didn't use soapy water, just plain old water, and everything fits perfectly, except for when I was dipping it in the bowl of water it snagged on the side of the bowl and when I made the mistake of trying to pull it off, it stretched, but I just cut it to fit and it's hardly noticeable.
Although, I won't lie. I did order the Zagg front screen protector for the fact that I know it works. I did the infamous "key test" on this cheap one, and it performed surprisingly well..
But it's not completely a rip-off if done right, especially for the $5 I paid.
milkman1026 said:
I got the full body Invisible Gadget Guard, and mine looks fine. I didn't use soapy water, just plain old water, and everything fits perfectly, except for when I was dipping it in the bowl of water it snagged on the side of the bowl and when I made the mistake of trying to pull it off, it stretched, but I just cut it to fit and it's hardly noticeable.
Although, I won't lie. I did order the Zagg front screen protector for the fact that I know it works. I did the infamous "key test" on this cheap one, and it performed surprisingly well..
But it's not completely a rip-off if done right, especially for the $5 I paid.
Click to expand...
Click to collapse
you paid 5 bucks?
Let us know when you all get your Zagg Invisible Shield protectors in. I am trying to decide between Zagg and BodyGuardz. I haven't used either but I love the device entire too much to cover with a case.
With a 45 day money back guarantee, surely it cannot be that bad for the $24.
I bought the Invisible Gadget Guard off Ebay as well for $13.97 with a free car charger. I used just water to get it on. At first, it felt and looked awful but given 2 days, everything smoothed out and I was able to get all bubbles off. It's actually pretty nice now. I had to snip a little of the sides because I stretched it a little too long, but that's not a big deal.
I have a Zagg on my Zune HD, and initially I felt like it was a bit rubbery, but I left it on to see what happened, and after a week or so, it didn't feel rubbery anymore to me. You have to be really careful with the installation, make sure you dont get any dust/debris under the protector, but after that you can throw it in your pocket without any worries.
I got a phantomskinz for my captivate, since it ended up being similar in price to the Zagg but comes with 2 instead of one, and I'll post back here with impressions once it comes in.
dappy15 said:
I bought the Invisible Gadget Guard off Ebay as well for $13.97 with a free car charger. I used just water to get it on. At first, it felt and looked awful but given 2 days, everything smoothed out and I was able to get all bubbles off. It's actually pretty nice now. I had to snip a little of the sides because I stretched it a little too long, but that's not a big deal.
Click to expand...
Click to collapse
do you have any pic?
accinfo said:
do you have any pic?
Click to expand...
Click to collapse
I'll try to get a pic up tonight.
I bought it and it was total crap. Waste of money!
Well I just finished installing this, and TBH it wasn't that bad... I've done many type of film installations on cars and stuff and it was very similar to doing it on the phone. I took my time with it and I am actually very satisfied with the result. It gives the phone a very needed grippy feel. Some pieces weren't the most perfect size to fit but it covered most of the area pretty well. I will got some pictures up later tonight. You really have to take your time with this installation or get a professional to do it, other wise you will end up like some people on here not very satisfied at all.
dappy15 said:
I'll try to get a pic up tonight.
Click to expand...
Click to collapse
I've had it on for a week now and I've grown to like it quite a bit. Still considering getting a case since it won't protect it from drops.
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
I have no idea what is PET, or the different types. However, if you are talking about the one I got:
http://www.handhelditems.com/crystal-clear-screen-protector-p-135710.html
my experience is that this has great clarity, can get bubbles during applications, and they rarely come off by itself. On the many devices I've used this type of protector on, only one came off. It started in one corner, and over the course of a month with gradual lint build up the screen protector eventually got ruined. I could've washed it and reapplied for that month, but I had a spare so I was lazy. You can reapply the protectors as needed to get the application right. The bubbles that occur aren't the same as the rubbery kind. Air bubbles can easily be pushed out after application. The problem is dust that prevent the protector from adhering to screen, causing a little bubble. If the dust is really small, the bubble goes away over a day. Or, like me, you can live with it. You try getting something the size of an iPad dust free.
Bought Electrostatic - LOVE THESE!
Ok, as a preface I have owned and used screen protectors before.
I had an iPhone before the EVO and used the Griffin Ultraclear hard Protetctors ad the PowerSupportUSA products of every variety on my previous iPod products (iPod Mini 1G, 4G, Nano 1G, 5G, Shuffle 1G, Touch, iPhone) not to mention an invisible shield one or two. I gave up on the films towards the end of my Touch ownership. They always felt horrible and I could never get one absolutely perfect (didn't help that they usually were not perfectly cut).
For the Evo, I tried the InvisibleShield the first day because I remembered just how well the InvisibileShield had held up on my 5G. Well I think that they have changed the formula, or rather that 3M has since then because the smooth feel and smooth look of the original are most definitely gone. The new variety is rubbery (even after days of use) and is not cut well enough to be a perfect fit (it never covered edge to edge). So i skipped it. Well it seems that with this large of a glass screen, you are much more liable to getting scratches (versus using and unprotetcted iPhone/Touch screen) and I got a few ultra hairline ones that are barely if ever visible to the naked eye and just knowing that they are there bothered me. So I needed to think of getting a screen protector.
Seeing as how air moves and its nearly impossible to get a screen protectors on without any bit of dust, I decided on getting the electrostatic variety so that I could rinse if it came off or needed to be reapplied.
I bought These: Electrostatic Screen Protector - Clear Hard
- Hard variety (PET)
- Very Clear
- Silicone Layer (helps the scratches and dents heal themselves and give sturdiness to the PET)
- Electrostatic layer (holds the screen protector onto the phone)
Six pack delivered for $4? I could do much worse.
Well as it turns out, they are PERFECTLY cut and cover every inch of screen and no more. It went on smooth as butter and I got no bubbles or dust or fingerprints or anything (used a credit card to smooth it down). These were by far the easiest I have had. Not only that, but the electrostatic holds on just as strong as the sticky variety and will not get the gunk on the sides sticking to it! I have taken my TPU case on and off a bunch and had no lift whatsoever. As a bonus, THEY SHOW FINGERPRINTS MUCH LESS THAN THE GLASS SCREEN DOES!
So at $0.65 each, they are killer and having a few backups is nice as well as giving one to a friend.
Cheers!
Thanks for that post. I'm expecting my EVOs (I ordered 2) in within the next week. I've been trying hard to find cases and screen protectors without much luck, but I'm going to go ahead and order those screen protectors you mentioned since you recommend them.
Yep i ordered the same ones and love them. i have loved these from the start. they are quite easy to put on and stay on well.
Scotch tape is your friend in getting screen protectors on without a bit of dust
Childofthehorn said:
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
Click to expand...
Click to collapse
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
OneStepAhead said:
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
Click to expand...
Click to collapse
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
xlrdxrevengex said:
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
Click to expand...
Click to collapse
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
remedy22 said:
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
Click to expand...
Click to collapse
thanks for the link. Can anyone find this brand cheaper
xlrdxrevengex said:
thanks for the link. Can anyone find this brand cheaper
Click to expand...
Click to collapse
I don't think so.
But these are $13 well spent. Believe me.
~fb
So what do people recommend as the best screen protectors to choose from for the MT4G?
I know everyone has their own opinions on them, but I'm hoping people can post their pros/cons and we can help us all narrow down the choice to a few.
Thanks!
the phantom skinz screen protector! pros: clear, nice feel, covers the whole front. cons: none if installed correctly.
I like the Reallook one. Clear, durable and feels like the glass.
I had the realook and phantom skinz. I settled on phantom skinz. I have the full body matte, plus clear phantom skinz. (Don't install the matte screen protector from PS).
Realook is very good with clear BUT the only thing that sucks is that you get ALOT of oils/fingerprints, etc on it. Easy install and easy clean with soap/water.
Phantom skinz gets oil on the screen too, but not as much. Screen surface is alittle "gummy". (Orange peel is very little to non existant). Watch out as the adhesive backing will attract lint (during installation) and you WILL not be able to get that off. PS also has lifetime warranty = unlimited screen protector replacements. (got the whole kit for $12 during 50% off cyber monday).
Don't bother getting invisible shield, they suck and give you orange peel, and it's thick.
@Jaylito,
Did you notice any kind of cloudiness after you cleaned your screen with alchol/towel? (assuming you've cleaned your screen with alcohol/water) For some reason, mine clouded up on the top.
yeah I have. I guess it's normal tho. goes away if u keep rubbing the screen back & fourth with ur thumb. guess since the material... if it gets wet, it'll cloud a bit cause the moisture seeps thru the inside but it'll dry out bro.
guess I have to do more rubbing then cause it's still cloudy...
oh well....
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Zagg Invisishield. Lifetime Warranty.
realook, hands down.
pros: crystal clear, feels like the glass itself, easy to clean, easy to apply, easy to reapply.
cons: a little expensive ($10 for 2, but its totally worth it)
MT4G_Slave said:
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Click to expand...
Click to collapse
Weird... for me, PS was MUCH EASIER than realook.
PS allows movement up/down/left/right with ease, and then you just squeeze out water.
For realook, it sucked to align the edges cause you can't move the film once you've "stickered" it on. Then you have to peel it back off and realign, causing lint (in my case) to adhere, and then I have to clean it again.
For me the realook was the best by far. I tried a couple of the wet app kind like invisishield and clear freak on the 4 mt4gs that I had and the realook was the best. I agree its a pain to put on, especially if you have animals because of dust and hair, but if you apply it in the bathroom after letting it steam up from the shower, I've found I can get it on without too much dust or hair falling on the screen. Also, get some extra scotch tape and place it on the front of the realook screen to keep your fingers off the adhesive side while applying it. Another nice thing is that each protector comes with two dots to apply to the camera lens in the back.
The only bad thing is that I think the realook attracts fingerprint grease worse than the wet app kind.
I have a zagg on my nexus s mostly because its all that's out right now and will put a realook on as soon as they are available.
Sent from my Nexus S using XDA App
The Boxwave screen protectores look pretty good too, though I've never tried one myself.
Ghost Armor. Just added it today on my 4G n its cut to fit perfectly, including the sensors n camera. FEELS like the real glass n doesn't take away from the display like the ones Tmo sales. Avoid those *****es like the plague.
I used Zagg for my Nexus S.
I get generic ones from a guy named lcd-protectors on ebay, 5 for $3.50. They're the stiff kind with two protective layers that you peel off, one before you apply and one after. I'm too cheap to pay more.
i just ordered a full body cover kit from stealthguards.com
choosing the clear type and none of the colored ones, it was $2.85 (full body protection, just pay shipping)
$2.85 sure beats dishing out $25 for zagg which is the same crap.
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
I love these screen protectors that I bought on Amazon. Perfect on the first try with no bubbles! Check it out here: http://www.amazon.com/gp/aw/d/B004E49TEG/ref=mp_s_a_1?qid=1294786757&sr=8-1:
BoxWare screen protector is well IDK how to rate it as it is just regular. What I did not like about it was it does "NOT" fully cover the screen as you have little gap very small which bugs me as I am neat. The feeling right now is artificial as I can tell it is there maybe cuz its still new as I applied it just 2hours ago. So lets wait and see how it turns out in long run.
I grabbed a Reallook screen protector off of amazon:
Pros: The feel and clarity are great
Cons: The cut. It has a cutout for the FFC and leaves a fair bit of space on all sides (as a result it's easy to get on) but it's really short on all sides in my opinion.
Part Four said:
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
Click to expand...
Click to collapse
Tell that to the scratch in my screen that I got the first day of having the phone... yeah, needless to say, I have a screen protector now and its helped a lot.
Sent from my HTC Glacier using XDA App
Anyone is using Exim screen protector on I9100? Is it perfect fit? Is it a fingerprint magnet? Can anyone share some photo after having it on?
No one using Exim screen protector???
I an using the exim screen protectors. Got them off ebay, shipped from HK. It took 2+ weeks to get them.
I would consider them a perfect fit. They are a tad undersized, but I prefer that; it makes for an easier install.
Exim quality, very scratch resistant, but average when it comes to finger prints. They wipe off easily.
I will take a picture later on and post it.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
I an using the exim screen protectors. Got them off ebay, shipped from HK. It took 2+ weeks to get them.
I would consider them a perfect fit. They are a tad undersized, but I prefer that; it makes for an easier install.
Exim quality, very scratch resistant, but average when it comes to finger prints. They wipe off easily.
I will take a picture later on and post it.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hi,
Thanks for your reply. How do you rate the installation process. Is it tough to install? How about the process of getting the bubble out? Is there any bubble after the installation? It would be great if you could post so picture. Well I feel that as long as fingerprint and oil stain is easily wipe of, this is consider good.
I found installation to be easy, as it's undersized a tad. If you have ever put screen protectors on, this one is no different. peel off a little of the top while folding down the protective layer and line up the top portion. once you have the top lined up and stuck on pull the rest of the films cover off and let it lay down.
If you didn't get the alignment right, get some clear magic tape, apply a little section to the bottom of the screen protector, lift up while holding the top of the protector in place with your thumb and pivot in place.
If you get any dust in between the protector and screen, apply some tape near the area, lift up and with your other hand stick a piece of fresh tape under the screen protector to grab the dust.
On another note, if you have ever applied a invisible skin like zagg, bodyguardz, or skinomi: you can use the same technique of spraying the protector aligning in place and pushing the fluid out with a squeegee.
I'll look for a good video to show what I'm talking about and post it below.
Sent from my Inspire 4G using XDA Premium App
Hi,
I know how the Zagg shield work. Thanks for the pictures. The screen protector look pretty decent and well fitted. May I know the type of Exim screen protector you have. Does it look as if there is no protector on screen? Thanks.
You can't tell it is on at all, crystal clear.
Sent from my Inspire 4G using XDA Premium App
I am using the Exim protector and agree it is pretty good. It is clear but I wouldn't say it's invisible as you can tell from the photos. I am waiting for the Martin Fields ones to be available.
Sent from my GT-I9100 using XDA App
Pinkthesink & PeteRyde , may I know which Exim are you using. Screen Protector Ultra Clear (SPUC)), Screen Protector Ultro Protection (SPUP) or Screen Protector Original Clear (SPOC))
I just checked, it is SPOC. I also received the steinheil ultra oleophobic protector in the mail yesterday from exportprive.com. It is very nice.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
I just checked, it is SPOC. I also received the steinheil ultra oleophobic protector in the mail yesterday from exportprive.com. It is very nice.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hmm. That explain why it not that clear. SPUC would be a better choice.
hostet said:
Hmm. That explain why it not that clear. SPUC would be a better choice.
Click to expand...
Click to collapse
I have just ordered a pack of Exim screen protectors SPUC for my SGS2 directly from Exim online store.
It's gonna be shipped to me in 7-21 business days apparently.
jeanclaudevandamme said:
I have just ordered a pack of Exim screen protectors SPUC for my SGS2 directly from Exim online store.
It's gonna be shipped to me in 7-21 business days apparently.
Click to expand...
Click to collapse
Hi,
Do keep us updated of the quality and cutting. Thanks.
hostet said:
Pinkthesink & PeteRyde , may I know which Exim are you using. Screen Protector Ultra Clear (SPUC)), Screen Protector Ultro Protection (SPUP) or Screen Protector Original Clear (SPOC))
Click to expand...
Click to collapse
I'm using SPUC.
PeteRyde said:
I'm using SPUC.
Click to expand...
Click to collapse
How is the quality?
It is pretty good and very clear. Fingerprints are easy to wipe off which is good as it does accumulate them easily. The only thing I don't like about it is the cut. It is as per the picture where the home key is cut to the button and the speaker/camera cut to the top.
Sent from my GT-I9100 using XDA App
Been using the EXiM SPUC protectors on all of my phones since my TouchPro and have found them to be very clear but they are prone to fingerprints. I'd personally prefer fingerprints rather than permanent scratches.
On this phone they fit fairly well. The cut outs are well placed and don't obstruct any of the sensors at the top, but they are a little small around the edges (good if you use one of those TPU style cases because the case will be less likely to push on the edges of the protector).
Not much else I can comment on. They fit, they are clear and they are cheap while remaining high quality.
Hi PeteRyde & zehro,
Thanks for the review on the screen protector. I do agree the cutting is not as great as the rest. But most importantly, it is hard enough to resist scratch and is clear. Further to that, the pricing is pretty competitive.
hostet said:
Hi,
Do keep us updated of the quality and cutting. Thanks.
Click to expand...
Click to collapse
Experiment over. Costly, and I wish I never indulged in it.
Disclaimer: The Exim SPUC would likely be pretty good if the installation went more perfectly than Mary's inception of Jesus H Christ. It felt very smooth, did not scratch or oil at the slightest touch and was extremely clear picture quality wise.
One thing that's wrong with it is that some air bubbles dont' come out, they don't even move, they stay there and become a splodge.
What you really need is about 10 of these in a pack, because if they don't install more perfectly than the inception of Jesus H Christ on your first try, you need to bin them and move on.
Basically my 1st try ended up with lots of air bubbles and some dust/lint underneath beacuse i initially got the positioning wrong, so i lifted it up to realign it, getting more dust in the process.
So I move onto my 2nd try with the second protector in the pack. This time, I get alignment correctly first time. Unfortunately there were still air bubbles and there was a speck of dust where the screen was. The airbubbles wouldn't come out and ended up in sploges, trying to remove that speck of dust ended in more dust on the screen.
So now both protectors were boned. Then I decided to test Exim on it's word that it's protectors are washable, so I blast the silicon side under my tap to get rid of all dust. It did get rid of all dust/lint.
So I try reapplying it wet with just tap water, well it does apply, but the water won't come out properly and leaves skidmarks underneath, even with a squidgee (I have a spare Zagg Invisible shield one).
No good, so I wash it under tap again, then I first of all dry and clean my phone screen with microfibre cloth, then blast it with an air compressor to blast out and dry any escaped water in the bit where the screen joins the side, because I didn't want moisture into phone electronics.
This time I try an "proper" wet solution, I actually have a bottle of that Zagg Invisible shield spray, so I use that and try to reapply the Exim SPUC. It works better than water, but I was becoming increasingly frazzled and another bit of dust got underneath the screen, so I decided to blast screen with air compressor, big mistake, solution streak everywhere. So I take off the Exim protector to wipe excess liquid
I then found the Invisible Shield spray is utterly crap and the whole Zagg thing is just a rip off because the spray solution made a film on my screen, like it was obviously. The I madly scrub with microfibre cloth to get rid of it, thank **** it went.
In a moment of despair, I touch my SGS2 screen with my bare fingers, it was wrong, but felt so right. Like grabbing the fine ass of a lapdancer, something that you're suppposed to look, but not touch.
Then having totally wrecked my new Exim Screen Protectors which costed me $11 or £8. I go back to the 10 pack £1.99 protectors I got of eBay, they're cheap and slutty like the whore of Babylon, but at least they're readily disposable.
I tried and fail to apply 3 more cheap screen pretectors because of dust/link/air bubbles, bin them all and on 4th go, succeed. Experiment over.
jeanclaudevandamme said:
Experiment over. Costly, and I wish I never indulged in it.
Disclaimer: The Exim SPUC would likely be pretty good if the installation went more perfectly than Mary's inception of Jesus H Christ. It felt very smooth, did not scratch or oil at the slightest touch and was extremely clear picture quality wise.
One thing that's wrong with it is that some air bubbles dont' come out, they don't even move, they stay there and become a splodge.
What you really need is about 10 of these in a pack, because if they don't install more perfectly than the inception of Jesus H Christ on your first try, you need to bin them and move on.
Basically my 1st try ended up with lots of air bubbles and some dust/lint underneath beacuse i initially got the positioning wrong, so i lifted it up to realign it, getting more dust in the process.
So I move onto my 2nd try with the second protector in the pack. This time, I get alignment correctly first time. Unfortunately there were still air bubbles and there was a speck of dust where the screen was. The airbubbles wouldn't come out and ended up in sploges, trying to remove that speck of dust ended in more dust on the screen.
So now both protectors were boned. Then I decided to test Exim on it's word that it's protectors are washable, so I blast the silicon side under my tap to get rid of all dust. It did get rid of all dust/lint.
So I try reapplying it wet with just tap water, well it does apply, but the water won't come out properly and leaves skidmarks underneath, even with a squidgee (I have a spare Zagg Invisible shield one).
No good, so I wash it under tap again, then I first of all dry and clean my phone screen with microfibre cloth, then blast it with an air compressor to blast out and dry any escaped water in the bit where the screen joins the side, because I didn't want moisture into phone electronics.
This time I try an "proper" wet solution, I actually have a bottle of that Zagg Invisible shield spray, so I use that and try to reapply the Exim SPUC. It works better than water, but I was becoming increasingly frazzled and another bit of dust got underneath the screen, so I decided to blast screen with air compressor, big mistake, solution streak everywhere. So I take off the Exim protector to wipe excess liquid
I then found the Invisible Shield spray is utterly crap and the whole Zagg thing is just a rip off because the spray solution made a film on my screen, like it was obviously. The I madly scrub with microfibre cloth to get rid of it, thank **** it went.
In a moment of despair, I touch my SGS2 screen with my bare fingers, it was wrong, but felt so right. Like grabbing the fine ass of a lapdancer, something that you're suppposed to look, but not touch.
Then having totally wrecked my new Exim Screen Protectors which costed me $11 or £8. I go back to the 10 pack £1.99 protectors I got of eBay, they're cheap and slutty like the whore of Babylon, but at least they're readily disposable.
I tried and fail to apply 3 more cheap screen pretectors because of dust/link/air bubbles, bin them all and on 4th go, succeed. Experiment over.
Click to expand...
Click to collapse
What an experience you have. I guess it is due to the area you are in when applying the screen protector. It seems to me dust is all around you which is causing all this agony. You can try the suggestion as listed here. Look at post 1, 2, this and this video for the soap method. You may want to contact Exim and check if you can get a replacement. Anyway how many Exim protector you get in the order?
Expensive glass screen protectors like glassTr or whatever else. I got one of the 8$ tempered glass screen protectors off eBay and. Have been rocking it about a month now. Thing looks beautiful and is tempered and oleophobic or whatever it's called. Went on perfect the first time and I love the feel if the glass. Just like the original screen. Have had zero issues with touch sensitivity or anything
Sent from my HTCONE using xda app-developers app
I agree. Spent $5.00 from ebay and about 3 weeks shipping from China. I even purchased another one just case .
Can you post some ebay links?
John.
I'm sure these glass protectors look good initially, but what I'd be interested in seeing is how they hold up long term after several months. My understanding is some of the cheaper glass protectors have issues lifting at the edges due to poorly made adhesive. I have an iLoome incoming and I'm worried even it will have lifting issues.
This seems to be the cheapest seller currently. http://www.ebay.com/itm/Perfect-Qua...l_Phone_Screen_Protectors&hash=item51b23a2b92
+ 1
I actually had a spigen glass screen protector before , removed it due to bad installation and bought a 8$ one . Found to be exactly the same. no issues what so ever.
Spigen and mime or w.e they are , are all ripoffs. just buy a aftermarket one. They also replace it for free if its not delivered to you in pristine condition.
Well I got this Armor Suit tempered glass screen protector from Amazon for my HTC One and am pretty much satisfied with its quality and features...
http://www.amazon.com/ArmorSuit-Mil...1&keywords=Glass+Screen+Protector+for+HTC+One
and I like this tempered glass screen protector pretty much..!!!!
circuit ptextrns
I'm going to have to invest although I can never get the damn things on without bubbles :crying:
N345H said:
I'm going to have to invest although I can never get the damn things on without bubbles :crying:
Click to expand...
Click to collapse
Much sure you are applying in a relatively dust free area. Bubbles that won't come out are usually dust getting stuck between the screen and the protector. The glass protectors are less likely to get bubbles from non dust issues. I bought a MIME and while expensive at 25 bucks, it came with a tack sheet that removes any dust that you might not see.
If the cheap glass protectors work for you, great. 25 bucks is not a lot to spend on a 600+ phone in my opinion.
---------- Post added at 08:23 AM ---------- Previous post was at 07:44 AM ----------
Jimmy2u said:
Well I got this Armor Suit tempered glass screen protector from Amazon for my HTC One and am pretty much satisfied with its quality and features...
http://www.amazon.com/ArmorSuit-Mil...1&keywords=Glass+Screen+Protector+for+HTC+One
and I like this tempered glass screen protector pretty much..!!!!
Click to expand...
Click to collapse
That is not a glass screen protector. I have had them. They are made of plastic. If you can get them on without bubbles, they work great but there is a stickiness to them that some like, I do not, so I wanted a real glass protector.
N345H said:
I'm going to have to invest although I can never get the damn things on without bubbles :crying:
Click to expand...
Click to collapse
I like the water trick. Clean it up real good with the provided cleaning cloth and make sure its 100% dry. Then mist the screen with a spray bottle and apply the screen protector. Use the card to work out bubbles. Works every time.
khhhhris said:
I like the water trick. Clean it up real good with the provided cleaning cloth and make sure its 100% dry. Then mist the screen with a spray bottle and apply the screen protector. Use the card to work out bubbles. Works every time.
Click to expand...
Click to collapse
I agree to a point. If even the smallest dust particle gets on the screen after cleaning it, you will get a bubble that is difficult, if not impossible, to remove. It is hard to have a "dust free" environement in a home.
The nice thing is I have wrecked a few of the plastic film protectors and the companies always just sent a new one.
I have had probably 20 devices over the past 2 years so I think I have tried about every brand of protector on the market
The glass protectors are the best for me. They feel like using the naked device. The plastic protectors always have a "sticky" feel to them and none lasted more than a few months before having issues with edge peel, discoloring, etc.
I had a Muvit Screen Guard for about 8 euro's.
It included two of these large protectors fitting screens up to 6.8" and you have to cut out to the right size yourself. They worked splendid for me. I sent in my HTC One for repair and the repair people scratched the screen, or rather the protector. Not a single thing on the real glass though so mission accomplished! And the scratches on the protector were pretty deep, so I agree. A cheap protector is just as good at protecting against reasonable damage done by keys or other sharp edges in say, your pocket or purse.
Now I'm using the screen protector the repair center included when sending my device back home.
Mike02z said:
I agree to a point. If even the smallest dust particle gets on the screen after cleaning it, you will get a bubble that is difficult, if not impossible, to remove. It is hard to have a "dust free" environement in a home.
The nice thing is I have wrecked a few of the plastic film protectors and the companies always just sent a new one.
I have had probably 20 devices over the past 2 years so I think I have tried about every brand of protector on the market
The glass protectors are the best for me. They feel like using the naked device. The plastic protectors always have a "sticky" feel to them and none lasted more than a few months before having issues with edge peel, discoloring, etc.
Click to expand...
Click to collapse
A few people has posted to turn the hot water on with the shower running. Let it get steamy in there and it will take the dust out of the air. Then put your screen protector on in the bathroom and the dust element should be eliminated.
Sent from my HTC6500LVW using Tapatalk
I 'wasted' my money on a GlassTr screen protector for my One. Was a little suspicious of the Ebay ones - probably wrongly so. It was I think very expensive but has fitted well and thus far working well. I'll never go back to those plastic 'things' again. Managed to get one spec of dust trapped under but other than that it's crystal clear, very smooth to the touch and phone just as responsive to the touch. Too early to comment on how it's wearing but looks good so far.
I got one of the cheapie eBay ones. I've had it about two months and haven't had any issues, save one... The glass doesn't completely cover the screen. You would think it would cover the entire black area on the face, but mine was cut about 1mm too short! Since it does cover the entire visual area, I decided it didn't bother me enough to go through the process of replacing it.
I used the hinge method, and did not have any issues with bubbles or dust on the screen.
http://www.youtube.com/watch?v=PMPqDwVZzzM
Normally the saying goes, you get what you pay for. True for many things, however there are always exceptions. Going to try one of these! Thanks
I took the advice every one has suggested to fit screen protector tape down one side as hinge in bathroom with hot water running washed hands cleaned phone and screen even cleaned screen protector before removing plastic and it went on like a dream. Bought my screen protector from empire but can't recommend them due to carry on getting sent a protector packaged in thinner cardboard than a cereal pack so received it smashed then they sent me another in better packaging but doesn't say empire anywhere so not sure if it's there's but it works and iam happy although mine doesn't fully cover black area it's out about 2 to 3 mill but doesn't bother me .
Sent from my HTC One using xda app-developers app
Yeah I Agree
I've got the iloome, it's been on two months now and I've not had one problem.
I got a glass protector from ebay and I have a huge bubble in the lower left hand corner. Do those go away or should I reapply?
You could just buy tech amor screen savers from amazon, free replacements for life. I requested a new set of 3 and I got it for free, didn't pay postage or anything. Basically free screens for a while.