Hi I have rooted my Samsung Galaxy Tab 3 8" 3g (SM 311) and I am in the need to install the AX88772 USB to 10/100 Fast Ethernet (in my job they allow only ethernet cable connection and not wifi).
I do not have the knowlege to complile the kernel or do whatever it needs.
Is there a way to install it as I do in a pc or mac or the recompile is nessesary?
Any help will be appriciated.
Thanks in advance
Did you have success with installing the adapter so far ?
Hello,
my Axis LAN adapter (0b95:772b) is beeing recognized by stock android in tab 3 10 automatically = eth0 device is created after plug-in, however there seems no client app trying to configure it (like dhclient for DHCP etc.). have anyone experience how to, ideally automatic, use and configure it?
thanks
Related
Hello
I try to connect an ASIX88179(USB-RJ45.-.Ethernet) via OTG but I don't get connection.
That's possible to connect a dongle (RJ45) via OTG on this device?
I search on this Web and I read that I need to install the drivers asix.ko with "su insmod asix.ko" but terminals says Unknown id: insmod.
Can you help me?
Thanks for all,
Juhn_Hoo
Hi
I am trying to get ethernet access on the N7 LTE using a USB OTG cable and USB-Ethernet adapter. Has anyone had success with patching the stock images, or is there a development ROM that has this available.
Thanks
Alex
Yes. Take a look here. http://code.google.com/p/android/issues/detail?id=58868
There's a lot to go through, but the condensed version is that a fellow made a new boot image that supports Ethernet connections via USB OTG. Your bootloader must be unlocked in order to flash the boot image.
Thanks, but it is still not working.
I have downloaded the N7 LTE patched boot image from the thread and flashed it. My N7 boots successfully but using the OTG cable + USB ethernet adapter the ethernet is not recognised (I am using a USB 2.0 ethernet adapter from the company 'Plugable')
I have also tried to extract, edit and repack an official rom, but I get an error during the repack stage. I am trying to use Android kitchen and cygwin.
So I am stuck. Help!
Update.
Using the patched boot image, then rooting, and then issuing the command 'dhcpcd eth0' in terminal I can browse the internet in Chrome. However GMail and Play store don't work connect correctly
Everything seems to work now except Youtube app.
Frustrating thing is that I have to connect to a wifi source, disconnect, and then ethernet works (I am not using a sim). If I dont connect first to wifi, the apps dont see the connection!
I went to use the Microsoft Remote Desktop app over ethernet and the device does not see a network! Would have thrown the device in the garbage disposal shute (if I had one).
Finally there is a solution to get ethernet working on the Nexus 7 2013 LTE with all apps without connecting to Wifi first and praying to the heavens. I found that installing the latest stable Cyanogen Rom works, so I can now use this needlessly hampered device for what I purchased it for.
Hope this saves someone some valuable time, unnecessarily wasted by ? at Goggle for reasons unfathomable.
I dont want to bury this in my other post.
Has anyone managed to update the box firmware via the recovery console (USB keyboard alt prnt scn i method)..
My box is stuck in a loop of old firmware that insists on an update before it will boot and outside the USA where they wont give an update to. Catch 22.
Phat Phreddy said:
I dont want to bury this in my other post.
Has anyone managed to update the box firmware via the recovery console (USB keyboard alt prnt scn i method)..
My box is stuck in a loop of old firmware that insists on an update before it will boot and outside the USA where they wont give an update to. Catch 22.
Click to expand...
Click to collapse
To my knowledge, ADB is disabled in stock recovery. And furthermore, USB peripheral mode is disabled in the kernel. Therefore I know of know way to do anything useful with stock recovery.
Phat Phreddy said:
I dont want to bury this in my other post.
Has anyone managed to update the box firmware via the recovery console (USB keyboard alt prnt scn i method)..
My box is stuck in a loop of old firmware that insists on an update before it will boot and outside the USA where they wont give an update to. Catch 22.
Click to expand...
Click to collapse
Have you tried to set up a VPN and see if that can help?
I could VPN with my PC..
How can I set up a VPN with only a box that wont boot and a dumb router ??
Phat Phreddy said:
I could VPN with my PC..
How can I set up a VPN with only a box that wont boot and a dumb router ??
Click to expand...
Click to collapse
If your PC has two network connections (e.g., wifi and ethernet), you can connect to the internet via VPN with one connection interface, and set the other to share your PC's connection and connect the Fire TV. For example, setup a VPN connection via Wifi on your PC, then connect the Fire TV to your PC via ethernet, and set your PC to share your wifi connection over its ethernet port.
AFTVnews.com said:
If your PC has two network connections (e.g., wifi and ethernet), you can connect to the internet via VPN with one connection interface, and set the other to share your PC's connection and connect the Fire TV. For example, setup a VPN connection via Wifi on your PC, then connect the Fire TV to your PC via ethernet, and set your PC to share your wifi connection over its ethernet port.
Click to expand...
Click to collapse
OK my PC doesnt have 2 nics.. I guess I have to go buy a wifi card..
Hello,
I have a tab 3 7.0. I want to use it with a USB wifi dongle. By default it does not support a such device. If I install any rom to it, can I use this usb dongle with my tablet?
Hello everyone!
I have got a Galaxy S4 Mini (I9192) and I try to connect my PS4 controller to it, in order to use PS4 modded remote control app, but the phone does not recognise it. I use CM13 latest build by @csendre , custom kernel by @DarkFrenzy and TWRP 3.0.2-1 by @ne0zone75 as well, but I cannot control the phone through my controller. Inside TWRP, in mount option, I cannot enable USB OTG, and using OTG Troubleshooter app, it has crosses on two last lines (not recognized by Linux and not recognised by Android). I have also connected USB flash drive without any luck... So, is there any way to use USB OTG or is it a hardware limitation of the phone?
Thank you a lot!
bobo1704 said:
Hello everyone!
I have got a Galaxy S4 Mini (I9192) and I try to connect my PS4 controller to it, in order to use PS4 modded remote control app, but the phone does not recognise it. I use CM13 latest build by @csendre , custom kernel by @DarkFrenzy and TWRP 3.0.2-1 by @ne0zone75 as well, but I cannot control the phone through my controller. Inside TWRP, in mount option, I cannot enable USB OTG, and using OTG Troubleshooter app, it has crosses on two last lines (not recognized by Linux and not recognised by Android). I have also connected USB flash drive without any luck... So, is there any way to use USB OTG or is it a hardware limitation of the phone?
Thank you a lot!
Click to expand...
Click to collapse
I did not use a controller with the S4 mini, however I used USB OTG functions with no issues, but you need to supply power so use a Y cable. Our hardware can not supply power through the USB port