Disclaimer: We're not responsible for any damages, explosions, transformations or mutations that may happen with your device. Do understand that flashing this kernel, or any custom kernel voids your warranty and the Knox flag thinga-ma-jig. This is a kernel discussion thread, which means feel free to discuss this kernel. Be respectful of your opinions, both good and bad.
Devices Supported: T-Mobile Note 3, AT&T Note 3, International Note 3 (Snapdragon 800). Other Note 3 variants MAY or MAY NOT work! You've been warned!
Click to expand...
Click to collapse
***WonderChild***
Discussion Thread
WonderChild is proudly presented by @itsmikeramsay and @djintrigue808
Kernel Status: BETA
Features:
Latest Kernel Updates: 3.4.69
GCC 4.7.2
ExFAT Support
SELinux: Permissive
LZO Compression (Bigger file, but boots much faster)
Overclocked: 2.96GHz (3GHz)
Underclocked: 96MHz
USB FastCharge - yank555-lu
Custom Voltage Table - Imoseyon
OndemandX - Imoseyon
InteractiveX - Imoseyon
Panel Color - Imoseyon
Faux Sound - faux123
Intellidemand - faux123
Intelli-plug - faux123
Intellithermal - faux123
Simple GPU Gov - faux123
Smartmax - maxwen - Note1
Smartmax_eps - maxwen - Note1
Wheatley - Ezekeel
ConservativeX - jasmison904
Ultra Kernel Same-page Merging (UKSM) - jasmison904
FIOPS Scheduler - Doomlord
SIO Scheduler - Doomlord
ZEN Scheduler - Brandon Berhent (No username)
Disabled CFQ Scheduler (May Enable Later)
Disabled Userspace, Powersave, & Conservative Governors
Note1: Smartmax & Smartmax_eps are NOT benchmarking governors. You'll generally get great performance/battery, but the way it's setup, it's not meant to be used for such purposes. It's still being fine-tuned also.
Click to expand...
Click to collapse
Download: Google+
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Side Note: Many of you may wonder... Why Mike, Why DJ, why 3GHz? Our answer to that is, because. That's it lol. We're curious to know the max of this kernel that EVERYONE can run... 3GHz seems like it so far. Now I'm not telling you to go and run 3GHz ALL day, that's up to you the users, but at the end... we did it just for the hell of it...
Click to expand...
Click to collapse
Source: Download
EndPost
XDA:DevDB Information
WonderChild, a Kernel for the T-Mobile Samsung Galaxy Note 3
Contributors
itsmikeramsay, itsmikeramsay, djintrigue808
Kernel Special Features: Listed above
Version Information
Status: Beta
Current Beta Version: v1
Beta Release Date: 2013-11-22
Created 2013-11-23
Last Updated 2013-11-23
Reserved
Mine
Nice! Can't wait to test out
Sent from my DragonMOD-N9005 using xda premium
OPGT said:
Nice! Can't wait to test out
Sent from my DragonMOD-N9005 using xda premium
Click to expand...
Click to collapse
Building release now.... will post on G+ and update the link in the thread....
Guys one word unreal!
Sent from my SM-N900T using Tapatalk
Amazing
Sent from my SM-N900T
Alright folks, OP updated with link to G+ link. Take ur time scaling up to 3GHz....
Cool 3ghz finally :good:
Good job on this playa
hi
hi itsmikeramsay thank you for your work
i'm haveing a problem with kernel rebooting when ever i lunch and benchmark app like linpack
and the clock speed is not sticking on what i want if i put it to 2.2ghz i open linpack it's gows all way to 2.9ghz
also 1 of the four core is 100% all time core number 1 no matter what i do 1 core is always at 100 even if i'm not doing anything
hope you fix this soon
mrkoa said:
hi itsmikeramsay thank you for your work
i'm haveing a problem with kernel rebooting when ever i lunch and benchmark app like linpack
and the clock speed is not sticking on what i want if i put it to 2.2ghz i open linpack it's gows all way to 2.9ghz
also 1 of the four core is 100% all time core number 1 no matter what i do 1 core is always at 100 even if i'm not doing anything
hope you fix this soon
Click to expand...
Click to collapse
Which governor are you running bro?
itsmikeramsay said:
Which governor are you running bro?
Click to expand...
Click to collapse
i'm using OndemandX but tried them all same thing i'm on n9005 btw
mrkoa said:
i'm using OndemandX but tried them all same thing i'm on n9005 btw
Click to expand...
Click to collapse
I'll look into it. Think I need to update some code for you guys. Don't think I'm having issues on T-Mobile with the cores running. The random reboots I'll look into as well.
None here working like a dream!
Sent from my SM-N900T using Tapatalk
I think I found some issues that I'm adjusting now... I'm building to see whether or not it works. Some people reported random reboot/freezing on a few governors... so I'm looking into what it may be generally...
Is there a link to your sources anywhere?
Shouldn't this thread be in "T-Mobile Galaxy Note 3 Original Android Development"?
knite75 said:
Shouldn't this thread be in "T-Mobile Galaxy Note 3 Original Android Development"?
Click to expand...
Click to collapse
Once we push source which we'll probably do in a few I'll move it there.
bootloop
Well, On my note 3 n9005 running the s5 rom it just bootloops...
Related
Updated to V0.10
Code:
[B][U]v0.10[/U][/B]
- uppatched to 2.6.35.14
- reverted my unreleased changes of the disabling of samsung debugging, it breaks lo power mode and causes SOD's
- Misc config tweaks
- Misc compiler tweaks
[B][U]v0.08[/U][/B]
- Up patched to 2.6.35.13 source
- merged some changed with Da_G's skyrocket source to fix cpu1 hot-plugging
this shiould solve issues of users having min clock stuck at 384mhz and/or max
stuck.
- fixed vdd_tables, system tuner will be supporting my kernel in up coming releases for this
system tuner, should no longer cause issues. as the hotplug fix solved this
[B][U]v0.06[/U][/B]
- Found tome Carrier IQ **** in tty consoles, removed it
sneaky sneaky...
- patched for call recording <--- DERP apparently it works with out my patch LOL
[B][U]v0.05.6[/U][/B]
- redid source tree from scratch
- Switched on OTG config options again (had them shut off)
- Battery issues resolved
- minor tweaks to autogrouping
- set kernel HZ to 300 for a smoother more responsive feel
- minor tweaks to lag free and smartass
- undervolts have been tested stable by many users and are in this release
[B]- PLEASE UNINSTALL SYSTEM TUNER AND CLEAR DALVIK CACHE THIS RELEASE[/B]
[B][U]v0.05.2[/U][/B]
- loosened up lag free so its not so twitchy at low freqs and ramping up and down constantly
- undervolted all freqs a fair bit
- added smartassv2 back in *Please TEST, i think i have solved the hang at max freq on wake*
- probably forgetting something else i messed with
[B][U]v0.05[/U][/B]
- sourced a multiprossesor service that actually wasnt ****ed and added to kernel
- turned on multi prossesor service and set it to shut off the second core on screen off
or when not needed, and only turn back on when needed
- Patched in BLN *thanks to romanbb*
- Patched services.jar to allow bln to notify you for most notifications from apps now
eg: gtalk, mms, sms app and ect..
- spiffy new boot logo ;)
[B][U]v0.04.1[/U][/B]
- removed smartassv2, its useless in its semi-working state, causing battery drain. I will figure out what its up to.
[B][U]v0.04[/U][/B]
- Lowered stock voltages a bit to get some better battery
- Fixed (i think) smartassv2 ramping up to max clock and then neglecting to ramp back down on wake from sleep
- Recommend using lagfree :)
[B][U]v0.03.2[/U][/B]
- fixed scheduler settings for new min freq, causing me SOD's on screen wake with notification
[B][U]v0.03.1[/U][/B]
- disabled 192MHz in the clock table so users cannot select it and cause a sleep of death situation.
- Default min freq now 384MHz
[B][U]v0.03[/U][/B]
- added in BFQ scheduler if users choose to use it you can use system tuner or other favored apps to change from CFS
- Added SmartassV2 and Iterative schedulers
- Tweaked SmartassV2 for our device
- Added ability to change voltage on the cpus with vdd_tables
[B][U]
v0.02:[/U][/B]
- 1.8ghz lag fixed ;)
- Autogrouping of scheduler added
- lagfree cpu scheduler added, with fully working sysfs interface to edit settings not set by default but recommended! its TITS!
- optimized build flags
- removed sysfs for vdd tables, we have not got it working yet. no worries you shouldn't need it yet ;)
- kernel compression changed for much faster boot times
[U][B]v0.01[/B][/U]
CK3+ Patch Set (Thanks to fellow Team Synergy member Ziggy471 for backporting)
OC 1.8 (Thanks to Romanbb's source tree)
Global UV Tables (Thanks to Romanbb's source tree)
All Debug shut off except samsung debugging (needed)
LZMA compressed
Carrier branded boot splash removed
init.d support
Voltage Control
You can control it via shell/init.d scripts as follows
To over volt ALL frequencies by 10000 uv:
Code:
echo "+10000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_table/vdd_levels
To under volt ALL frequencies by 10000 uv:
Code:
echo "-10000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_table/vdd_levels
To set a specific frequency (ie 1.8 GHz) with a specific voltage (ie 1.25 volts) ]
Code:
echo "1836000 1250000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
Use SetCPU as a gui or sysfs to control CPU freq
DOWNLOAD
CWM FLashable zip:
V0.10
Here
Call Recording app by skvalex
http://dl.dropbox.com/u/44644505/CallRecorder_v.1.0.27_alpha_build05.apk
The app is offered on XDA for free but you can promote his work by Buying it in the MARKET
Trial of full version ( has more features )
http://forum.xda-developers.com/showpost.php?p=19345181&postcount=750
SOURCE
V0.10
http://www.androidfilehost.com/.mrx/
Whoa thats a first, Im first thanks for your work and welcome.
haha thanks
Question: Does this matter that its for the Telus T989D? Will this work for both phone versions? Not a noob, but a noob question sorry. Confused a bit.
Sooo, this is exactly the same as jugs? Just compiled by you?
Sent from my SGH-T989 using Tapatalk
jmercil said:
Question: Does this matter that its for the Telus T989D? Will this work for both phone versions? Not a noob, but a noob question sorry. Confused a bit.
Click to expand...
Click to collapse
should work on tmobile or telus
mikeyinid said:
Sooo, this is exactly the same as jugs? Just compiled by you?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
no, its based off a compleetly different source tree (as the verry first sentense in my post says), i have stripped all debugging possible, its using ck3+ patch sets not bfs 404 and my stock voltages and clock tables differ.
its also a few mb smaller then juggs and has all boot animations stripped from the ramfs
what did you set stock clock to? i'll be the guinea pig and try it out for tmobile user
-Mr. X- said:
should work on tmobile or telus
no, its based off a compleetly different source tree, i have stripped all debugging possible, its using ck3+ patch sets not bfs 404 and my stock voltages and clock tables differ.
its also a few mb smaller then juggs and has all boot animations stripped from the ramfs
Click to expand...
Click to collapse
Thanks for the response. You answered alot more than just my questions I'm sure. I thought for v0.2 roman used the same source. Idk
Is this uv'd as much as jugs v0.1? My phone runs like a champ at 1.8 on that and battery is excellent so that is the voltage I'd like to stick with if possible
Sent from my SGH-T989 using Tapatalk
G1_enthusiast said:
what did you set stock clock to? i'll be the guinea pig and try it out for tmobile user
Click to expand...
Click to collapse
the stock clock is 1.5 like factory.
mikeyinid said:
Thanks for the response. You answered alot more than just my questions I'm sure. I thought for v0.2 roman used the same source. Idk
Is this uv'd as much as jugs v0.1? My phone runs like a champ at 1.8 on that and battery is excellent so that is the voltage I'd like to stick with if possible
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
romanbb uses the drivers only from the T989D source i use the whole tree as it contains less debug code.
-Mr. X- said:
should work on tmobile or telus
no, its based off a compleetly different source tree (as the verry first sentense in my post says), i have stripped all debugging possible, its using ck3+ patch sets not bfs 404 and my stock voltages and clock tables differ.
its also a few mb smaller then juggs and has all boot animations stripped from the ramfs
Click to expand...
Click to collapse
Thanks for the reply!
-Mr. X- said:
the stock clock is 1.5 like factory.
romanbb uses the drivers only from the T989D source i use the whole tree as it contains less debug code.
Click to expand...
Click to collapse
Actually I merged all the changes
Sent from my SGH-T989 using Tapatalk
Romanbb said:
Actually I merged all the changes
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
That's what I thought
Thanks for the new option Mr. X
Sent from my SGH-T989 using Tapatalk
kind of sluggish...
Romanbb said:
Actually I merged all the changes
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ah didn't know
Thanks for the looksee at your source tree btw
mikeyinid said:
That's what I thought
Thanks for the new option Mr. X
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
No probs, just fiigured it post whhat i personally make and run
G1_enthusiast said:
kind of sluggish...
Click to expand...
Click to collapse
Can't say i'm having this, i've been running these builds all day. aside from adding more changed and testing i didn't need to reflash because of performance issues.
G1_enthusiast said:
kind of sluggish...
Click to expand...
Click to collapse
Are you using ondemand gov? There's something not right about ondemand in this source. Gonna need to be re-worked.
Sent from my SGH-T989 using Tapatalk
mikeyinid said:
Are you using ondemand gov? There's something not right about ondemand in this source. Gonna need to be re-worked.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ive been using on-demand exclusively @ 1.7GHz and have had zero issues. Although i don't put any faith in quadrant scores i was getting 4500+
I'm going to be working with Ziggy471 on lagfree and smartass v2 govs soon and see if i can get them to cooperate better with dual core setups.
-Mr. X- said:
Ive been using on-demand exclusively @ 1.7GHz and have had zero issues. Although i don't put any faith in quadrant scores i was getting 4500+
I'm going to be working with Ziggy471 on lagfree and smartass v2 govs soon and see if i can get them to cooperate better with dual core setups.
Click to expand...
Click to collapse
I get 3400 Max and some lag using ondemand with jugs. At 1.8. So Idk if its just my phone but ondemand isn't playing nice.
Sent from my SGH-T989 using Tapatalk
mikeyinid said:
I get 3400 Max and some lag using ondemand with jugs. At 1.8. So Idk if its just my phone but ondemand isn't playing nice.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
its the clock rate, 1.8 kicks the **** out of my device too so i stick with 1.7
i tried increasing the vdd but it didn't help much, if at all and i was not satisfied with wasting the voltage for 100mhz. with 1.8 2d accel really suffers too in quad i experienced.
-Mr. X- said:
its the clock rate, 1.8 kicks the **** out of my device too so i stick with 1.7
i tried increasing the vdd but it didn't help much, if at all and i was not satisfied with wasting the voltage for 100mhz. with 1.8 2d accel really suffers too in quad i experienced.
Click to expand...
Click to collapse
OK. That makes sense. Ill clock it down to 1.7 and see if that makes a difference. Thanks for the feedback
Sent from my SGH-T989 using Tapatalk
mikeyinid said:
OK. That makes sense. Ill clock it down to 1.7 and see if that makes a difference. Thanks for the feedback
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
no prob
10 char
[KERNEL][G2, G pro 2, G Flex, G3][3.4.92][Piasek-KK v0.5,1][30-07-2014][D802][KNOCK CODE]
Welcome Everyone
I would present My next project: Piasek-KK kernel for Stock-based ROM for LG G2 D802 variant
I have some experience with writing Kernels. Previous project is Kernel for Nexus 4
Features:
-Based on the latest LG source (d802v20D)
-Update Kernel to 3.4.92
-Built with the SaberMod GCC 4.9.1 toolchain
-DEADLINE scheduler (Default + Optimization)
-add Intelliactive (default), performance, interactive gov.
-Read Ahead Buffer Size: 2048 in default
-SLUB optimization
-Voltage control
-Force Fast Charge
-init.d support
-ARM RWSEM algorithm.
-Underclocking (96MHz) and Undervolting (-50mV)
-better WAKELOCK
-better CPU managment
-better RAM Speed
-patches from mainline 3.5 + Updates (For better Hotplug)
-and small updates and Optimizations
Sorry for my poor English
Thanks to:
Savoca
XDA:DevDB Information
Piasek-KK, Kernel for the LG G2
Contributors
piasek1906
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Piasek-KK-0.1
Beta Release Date: 2014-04-09
Created 2014-04-09
Last Updated 2014-07-30
reserved
Thanks! Nice to see more Kernel devs here! I appreciate your support for this device!
Thanks for joining the community
will test
Download link? and thanks for the effort im happy now that i didn't change my z1 for G2 for nothing
Simow.b said:
Download link? and thanks for the effort im happy now that i didn't change my z1 for G2 for nothing
Click to expand...
Click to collapse
I added the link to the first post.
Thanks for the kind words
Simow.b said:
Download link? and thanks for the effort im happy now that i didn't change my z1 for G2 for nothing
Click to expand...
Click to collapse
Look up m8
Above the thread title.
bender_007 said:
Look up m8
Above the thread title.
Click to expand...
Click to collapse
seems that he just finished uploading because it wasn't their earlier anyways thank you for pointing that out!
piasek1906 said:
I added the link to the first post.
Thanks for the kind words
Click to expand...
Click to collapse
thanks to you for your hard work hope you all the best
Piasek-KK Kernel v.0.2 Relased
Download
Changelog:
Interactive governor Optimization
Deadline I/O Optimization
SLUB Optimization
Default gov: Interactive
voltage control
If You use it please comment
thx for your work. i'm testing on d802. nice
testing v0.2 in d802 , using Interactive governor, low battery draining and cpu temperature, great kernel!
Thanks for your work!
piasek1906 said:
Piasek-KK Kernel v.0.2 Relased
Changelog:
Interactive governor Optimization
Deadline I/O Optimization
SLUB Optimization
Default gov: Interactive
voltage control
If You use it please comment
Click to expand...
Click to collapse
Just flashed this kernel on Cloudyflex 2.
Changelog said that default gov is Interactive. but after first boot, Trickster shows it was OnDemand.
I've nothing set on-boot.
Is that normal?
Sent from my LG-D802 using Tapatalk
farhanito said:
Just flashed this kernel on Cloudyflex 2.
Changelog said that default gov is Interactive. but after first boot, Trickster shows it was OnDemand.
I've nothing set on-boot.
Is that normal?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I have the same problem, need use tweak tools change to Interactive.
sorry for the noob question so interactive governor is preferable than ondemand for battery life? im well aware its all depends with how you use your phone and what apps you installed but which governor do you guys think is best for battery life? not that i'm complaining with my battery life though :cyclops:
farhanito said:
Just flashed this kernel on Cloudyflex 2.
Changelog said that default gov is Interactive. but after first boot, Trickster shows it was OnDemand.
I've nothing set on-boot.
Is that normal?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
ruboking said:
I have the same problem, need use tweak tools change to Interactive.
Click to expand...
Click to collapse
I know about this error. The script of the Nexus 4 does not work with G2. Something to handle it
losta said:
sorry for the noob question so interactive governor is preferable than ondemand for battery life? im well aware its all depends with how you use your phone and what apps you installed but which governor do you guys think is best for battery life? not that i'm complaining with my battery life though :cyclops:
Click to expand...
Click to collapse
Best gov for battery live is powersave but performance go down. I prefer interactive because CPU faster change freq. and battery life is good.
P.S. Thanks for good words
Butter smooth, wow
Sent from my LG-D802 using XDA Premium 4 mobile app
Piasek-KK v0.3 Relased
Download:
XDA Server
Changelog:
-enable DYNAMIC_FSYNC
-Undervolting -50mV
-Underclocking to 96Mhz
-Advance TCP offload control (default: westwood)
-Improvment Comilation and reduce size
-defconfig optimization for better battery live
-Tune iosched and Ondemand
-glibc
-arm: Cortex-A15 optimizations
Thanks for use my kernel and please comment
Cheers piasek1906
Usable on D801?
wow i'm first test 0.3 on flex 2.0. why size of zip archive low?
this kernel support init.d?
Sent from my Nexus 7 using Tapatalk
JediKernel This kernel is compatible with stock 5.0.1. I have not tried with others so if you feel so inclined to test on other 5.0.1 ROMs please let us know how it wentSo far this is tested and working on:
Stock 5.0.1
READ, READ, READ before downloading, flashing, or posting questions
***Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.***
Features
OC to 2.88GHz
Kernel Version 3.4.0
Advanced Power Emulation
Default Scheduler= CFQ
Default Governor= Ondemand
Default boot set to 2.26Ghz
Built using arm 4.8 toolchain
More...
Github
In my GITHUB you can find my sources and code changes
Credits
Google for Official Source Code
Faux123
Authorship is always retained in my Repos. Please see my git for commit author
Instructions
---FASTBOOT METHOD---
-Download boot.img
-Boot into bootloader
-In terminal: fastboot flash boot (path to boot,img)
-In terminal: fastboot reboot
---ZIP METHOD---
-Download Kernel zip
-Flash Kernel
-Reboot system
Changelog
Code:
01|07|2015-- Initial Release (See Features List)
Downloads
JediKernel 1.0
boot.img -- http://d-h.st/O3D
zip file -- http://d-h.st/5Mjl
Support this Development by clicking the link below --- Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation:
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
|KERNEL| JediKernel | 1.0 | Lollipop | 01-07-2015 |, Kernel for the Google Nexus 5
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2015-01-07
Last Updated 2015-01-07
Benchmarks are fun lol ------------ 2.88 clock -- OnDemand Gov -- ROW sched
LOVE NEW THING
"More...". Best feature ever.
ast00 said:
"More...". Best feature ever.
Click to expand...
Click to collapse
agreed. its a super-feature
I remember when you were building for the s2 haha. This guy has some amazing kernels!
Sent from my Nexus 5 using Tapatalk
I was thinking..
FauxSound is a "more" feature or not for now?
krazeecracker said:
I remember when you were building for the s2 haha. This guy has some amazing kernels!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks man that was long ago lol
Robert- said:
I was thinking..
FauxSound is a "more" feature or not for now?
Click to expand...
Click to collapse
No sir,
More.. is usually in all of my feature lists because I always seem to forget something
Does it feature color control to change values in gamma and rgb settings?
First, thanks for sharing the kernel, i like it to play with different kernel.
One question,
Gamma Control a planned feature in the future ?
bunnahabhain said:
Does it feature color control to change values in gamma and rgb settings?
Click to expand...
Click to collapse
No. this is a v1 so many of what will be added is not currently there.
Also, the goal of this kernel is to stay as close to stock as possible while enhancing the performance, battery-life, and usability of the device.
Color and sound may or may not be included in future iterations
In download [emoji3]
Favorite Note 2 kernel was Jedi. Nice to see its way to Hammerhead!
Sent from my Nexus 5 using XDA Free mobile app
Do core (two or three) in offline?
Ok will try it now
Edit: kernel runs... Looking for good settings. Using ondemand and deadline for now.
One thing I miss.... A sound mod... Sound is to low... And the quality is not the best... Are there alternatives?
SunamY said:
Ok will try it now
Edit: kernel runs... Looking for good settings. Using ondemand and deadline for now.
One thing I miss.... A sound mod... Sound is to low... And the quality is not the best... Are there alternatives?
Click to expand...
Click to collapse
I'm pretty sure the dev wants us to use stock settings. Otherwise he wouldn't have made them default
For sound use viper mod. I don't see any kernel changes necessary for this.
Runs ok. Oc to 2.5. Uv would be nice
Slimlat 5.0.2
@ptmr3 glad to see u here man. This phone just keeps on getting better
krazeecracker said:
I remember when you were building for the s2 haha. This guy has some amazing kernels!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This. Glad to see him around here. Didn't think he would have a Nexus 5. Welcome to the Nexus 5, hope you're here to stay man.
Edit : Reporting that Jedi kernel does in fact run on 5.0.2 stable so far.
DISCLAIMER:
I'm not responsible for any bricked device, as always make a backup of your phone (including EFS)!
Hi all,
I'm proudly to present an alpha release of a custom kernel for the CM11. it's still in progress so please don't blame me if you've some problems
FEATURES:
- Removed Alucard governor due to high battery drain, I'm optimizing it
- Add SIO/VR Scheds (next stable release)
- Optimized Interactive governor
- Some little changes to test stability
- Overclock GPU @550Mhz
- Add govs Darkness, pegasusQ, Smartmax, intellidemand, intelliactive
Download Link Alpha: http://d-h.st/CW3
Download Link Beta1: http://d-h.st/GZ5g
Download Link Beta4 http://d-h.st/tlIB
Please if you find problems/bugs post a logcat/kmsg to help me on fix it.
Link github: https://github.com/sev3n85/android_kernel_samsung_s3ve3g
Credits:
- Cyanogemod team
- @Rox for the kernel source code
- @alucard_24 for the governor
- @Danny_Dewet to help me with suggestions and test a first stage
Releases:
Alpha 1
Code:
- Add Alucard governor (seems good for performance)
- Add SIO/VR Scheds
- Optimized Interactive governor
- Some little changes to test stability
Beta 1
- Overclock GPU @550Mhz
- Add govs Darkness, pegasusQ, Smartmax, intellidemand, intelliactive
- Ram speedup
Beta 4
- Alucard Gov optimized for msm8226
- Add schedulers SIO VR BFQ ZEN
- Add workqueue WQ_POWER_EFFICIENT for more power efficient
sev3n1985 said:
DISCLAIMER:
I'm not responsible for any bricked device, as always make a backup of your phone (including EFS)!
Hi all,
I'm proudly to present an alpha release of a custom kernel for the CM11. it's still in progress so please don't blame me if you've some problems
FEATURES:
- Add Alucard governor (seems good for performance)
- Add SIO/VR Scheds
- Optimized Interactive governor
- Some little changes to test stability
Download Link: http://d-h.st/CW3
Please if you find problems/bugs post a logcat/kmsg to help me on fix it.
Credits:
- Cyanogemod team
- @Rox for the kernel source code
- @alucard_24 for the governor
- @Danny_Dewet to help me with suggestions and test a first stage
Click to expand...
Click to collapse
Very Good My Friend Nice Kernel Expect more updates
Inviato dal mio GT-I9301I con XDA Forums Pro
Thank you!
Very very very good!
I'll give it a try.
I'm using it with alucard governor, zen sched and ondemand governor for the gpu. It's very fast with less battery life, but it's good
@sev3n1985 you can have a kernel modified for stok original 4.4.2 rom?
pablonik79 said:
@sev3n1985 you can have a kernel modified for stok original 4.4.2 rom?
Click to expand...
Click to collapse
For now I'm working on CM11, when we have a good ones i'll jump on cm12
For stock i will try after those project, sure
P.S. I'm building a new version, after some tests with the help of @Danny_Dewet i will publish it.
:cyclops:
BDITA 2.2s
The kernel has been flashed and the phone works properly.
In the next days i'll give feedback.
Anyone could try if works with cm12?
sev3n1985 said:
Anyone could try if works with cm12?
Click to expand...
Click to collapse
It can not work, change the RAMDISK, bootloop goes, if you try.
Inviato dal mio GT-I9301I con XDA Forums Pro
Danny_Dewet said:
It can not work, change the RAMDISK, bootloop goes, if you try.
Inviato dal mio GT-I9301I con XDA Forums Pro
Click to expand...
Click to collapse
Ok, I'll try ASAP
I flashed the beta 1.
Some questions:
1) explanations on darkness, smartmax, pegasusq, intelliactive and intellimand
2) explanations on msm-adreno-tz, simple_ondemand and msm_cpufreq
3) do i have to switch soc temperature ON or i leave it OFF?
4) i leave 2048 on read ahead buffer size?
EDIT
For the first question i found this: http://androidmodguide.blogspot.it/p/blog-page.html
PS: I'm using darkness governor (a nightmare - a kind of pegasusq more stable - simplier but fast).
LuCiolla90 said:
I flashed the beta 1 and i have the bootanimation of miui.
WTF?
Some questions:
1) explanations on darkness, smartmax, pegasusq, intelliactive and intellimand
2) explanations on msm-adreno-tz, simple_ondemand and msm_cpufreq
3) do i have to switch soc temperature ON or i leave it OFF?
4) i leave 2048 on read ahead buffer size?
EDIT
For the first question i found this: http://androidmodguide.blogspot.it/p/blog-page.html
PS: I'm using darkness governor (a nightmare - a kind of pegasusq more stable - simplier but fast).
Click to expand...
Click to collapse
About miui boot... strange, before release it i've flashed on Ebita rom and no miui boot :|
1 question.. you've posted the link with the answers
2- those are standard gpu govs, from the Kconfig desc:
msm-adreno-tz - Trustzone based governor for the Adreno GPU. Sets the frequency using a "on-demand" algorithm. This governor is unlikely to be useful for other devices.
simple_ondemand - Chooses frequency based on the recent load on the device. Works similar as ONDEMAND governor of CPUFREQ does. A device with Simple-Ondemand should be able to rovide busy/total counter values that imply the usage rate. A device may provide tuned values to the governor with data field at devfreq_add_device().
msm_cpufreq - MSM CPUfreq based governor for CPU bandwidth voting. Sets the CPU to DDR BW vote based on the current CPU frequency. This governor is unlikely to be useful for non-MSM devices.
Basically : msm-adreno-tz good performance but high battery usage, simple_ondemand less performance but less battery usage and msm-cpufreq never tested :|
3) Is disabled as default since stock kernel, leave it
4) I suggest 1024 as default but after a search seems that 2048 is a good value, try and see if you've better performance with your card
Is it work with cm 12.1?
Sent from my GT-I9301I
mercur23 said:
Is it work with cm 12.1?
Sent from my GT-I9301I
Click to expand...
Click to collapse
No, only CM11. When I have time and free space on my poor hard disk i will release a CM12 version
550mhz on gpu? No thanks lol. Isnt worth it because of the battery when gaming. Nice i/o/schedulars tough!
Laurisss said:
550mhz on gpu? No thanks lol. Isnt worth it because of the battery when gaming. Nice i/o/schedulars tough!
Click to expand...
Click to collapse
You can select you preferred frequency for the gpu between 200Mhz 320Mhz 450Mhz 550Mhz using i.e. trickster mod of course
This 550Mhz will be awesome on cm 12.1 i can't wait :beer::beer::beer:
Sent from my GT-I9301I
Next project is CM12 don't worry but for now I will continue to develop CM11 because I need to understand the source code, change the toolchain and compile with sabermod or linaro
Sent from my GT-I9301I using XDA Free mobile app
FrankenKernelThis kernel is pieced from two beautiful kernels made by KlinkOnE and Codename13,hence the name Franken (shortend from Frankenstein)
I used Codename13's kernel_samsung_kylessopen as base ,and reused a huge number of KlinkOnE android_kernel_ba2x_2.0-1 commits,plus handfull of commits I think help.
This kernel is intended for Kylessopen devices,meaning its for S7560,S7560m,S7562,S7562L devices.
This kernel is compatible with CM11 and PAC-Rom 4.4.4
I will try to keep this kernel alive and running,
but to all users and devs,
please be aware that this is my first venture into "kernel-land" so some bugs are bound to show their ugly face.
DOWNLOAD LINK: https://www.androidfilehost.com/?fid=745425885120730785*Change log
Kernel updated from 3.0.60 to 3.0.101
A lot of small fixes
If kernel breaks your phone dont blame me,I didnt force you to flash it.
Souce code to FrankenKernel is here:https://github.com/pavlepiramida/FrankenKernel/tree/master
FrankenKernel with GPU OC to 300Mhz
*This version has GPU set to 300MHz,and its compiled with gcc-4.4.3 like stock kernel is.
This gcc provides a bit better graphic performance,but is also a smidge worst when it comes to CPU performance.
Kernel features:
*3 I/O schedulers:
-Deadline
-Zen(default)
-CFQ
3 CPU governors:
-Ondemand
-Lulzacive
-Performance
GPU is clocked at default ~246MHz
Kernel block has been refreshed and updated a bit,ensuring a bit more optimal IO performance
Dynamic FSync feature
DDP Writeback
Latest kernel changelog:
*Disabled KSM
Most wouldnt agree with me on this,but the fact is that KSM is way too heavy on processor which also affects battery.
Kylessopen has enough memory,it doesnt need to squeeze every byte of ram at the cost of CPU performance,and in my opinion KSM isnt a vital function
*Changed few kernel flags
Just experimenting with flags,trying to find best one that can complement kernel even more
*Switch to a better gcc
@kengnatural and I spent a whole week testing and benchmarking different compiler for kernel,until we realized that sabermod-4.7 gcc brings the most out of our Kylessopen kernels.From now on using only SaberMod gcc.
Works on s7562 with charm
Ritik99 said:
Will it work on s7562. Or will i get bugs?
Click to expand...
Click to collapse
Please read OP.
Then re-read it,if you are still unsure,keep reading OP until you figure it out.
pavlepiramida said:
Please read OP.
Then re-read it,if you are still unsure,keep reading OP until you figure it out.
Click to expand...
Click to collapse
Was just making sure that it won't brick my phone
WORKS ON S7562 WITHOUT any bugs.
Thanks
Ritik99 said:
Was just making sure that it won't brick my phone
WORKS ON S7562 WITHOUT any bugs.
Thanks
Click to expand...
Click to collapse
use cfq io governor
pavlepiramida said:
use cfq io governor
Click to expand...
Click to collapse
Why only 3 governers?
Ritik99 said:
Why only 3 governers?
Click to expand...
Click to collapse
why would you need more?
pavlepiramida said:
why would you need more?
Click to expand...
Click to collapse
1 or 2 were good
But these are also working nicely :good:
Is this for stock only or is it compatible with cm11?
RJinxed said:
Is this for stock only or is it compatible with cm11?
Click to expand...
Click to collapse
It is compatible with cm11, i have tested it.
RJinxed said:
Is this for stock only or is it compatible with cm11?
Click to expand...
Click to collapse
WoW
I forgot to update kernel info with such stuff....
Thanks for reminding me,Ill do it asap
Why no option to set CPU frequency to 1.3 GHz ?only 1.1 GHz?but why?
apratul Vasu said:
Why no option to set CPU frequency to 1.3 GHz ?only 1.1 GHz?but why?
Click to expand...
Click to collapse
Phone will have soft reboots bug if you use 1.3 GHz
Ritik99 said:
Phone will have soft reboots bug if you use 1.3 GHz
Click to expand...
Click to collapse
It will be back in final build?
apratul Vasu said:
It will be back in final build?
Click to expand...
Click to collapse
I think yes, but its not recommended. Our phone starts misbehaving after 1.2 GHz
Ritik99 said:
I think yes, but its not recommended. Our phone starts misbehaving after 1.2 GHz
Click to expand...
Click to collapse
Ohh k but good thing is that I am noticing great improvement in batttery
apratul Vasu said:
Ohh k but good thing is that I am noticing great improvement in batttery
Click to expand...
Click to collapse
With 1.3Ghz or 1.1Ghz
Ritik99 said:
With 1.3Ghz or 1.1Ghz
Click to expand...
Click to collapse
With 1.1ghz