Related
Any wireless charging cover etc. announced / available?
mgutt said:
Any wireless charging cover etc. announced / available?
Click to expand...
Click to collapse
The Note 10.1 2014 Edition doesn't support wireless charging.
I know. Thats the reason why I opened this thread in the accessories forum.
mgutt said:
I know. Thats the reason why I opened this thread in the accessories forum.
Click to expand...
Click to collapse
If you know it does not why would you start a thread? It makes no sense. It does not have a removable battery cover so there is no way to add wireless charging without hardware modifications.
Sent from my dlx using XDA Premium HD app
nrage23 said:
It does not have a removable battery cover
Click to expand...
Click to collapse
Ok, thats new for me. But there is one chance. There could be a case with qi Receiver and usb connector or if it has pins for a docking station then with connection to them.
mgutt said:
californiarailroader said:
mgutt said:
Any wireless charging cover etc. announced / available?
Click to expand...
Click to collapse
The Note 10.1 2014 Edition doesn't support wireless charging.
Click to expand...
Click to collapse
I know. Thats the reason why I opened this thread in the accessories forum.
Click to expand...
Click to collapse
Lol I laughed so hard @ this.
mgutt said:
Any wireless charging cover etc. announced / available?
Click to expand...
Click to collapse
Have you popped the back cover off to see if the pins are there?
If they are then a modded qi receiver would work great.
I do not own the Note 10.1. Thats the reason why I'm asking dumb questions.
For the Note 8 someone added a Qi Receiver with USB connector and hide it under a case.
deathshead said:
Have you popped the back cover off to see if the pins are there?
If they are then a modded qi receiver would work great.
Click to expand...
Click to collapse
He is not talking about taking the back cover off. He is talking about a case that has a plug that goes into the existing charge port of the tablet and there is a wireless charging coil within the case itself.
No, I have not seen any.
Yes, I do want one.
Does the Note 10.1 2014 has Connectors for a Docking Station? If yes, this would be an option to realize it without using an usb connector.
mgutt said:
Does the Note 10.1 2014 has Connectors for a Docking Station? If yes, this would be an option to realize it without using an usb connector.
Click to expand...
Click to collapse
It does not have docking pins.
I, too, would love to add wireless charging capabilities to the Note.
I read a story on the iQi Mobile - Seamless Wireless Charging For iPhone and tried to find a similar product for micro usb ports. I came across a possible alternative but don't have any experience with the website/seller of the product.
(sorry, can't post links yet, remove spaces or search Google for "netimes Qi Standard Universal Wireless Charging Adapter for Samsung Micro-USB Connector")
www .netimes.com/shop/qi-standard-universal-wireless-charging-adapter-for-samsung-microusb-connector-p-4963 .html
Do you guys think something like this would work?
One disadvantage would be that you would have to unplug the cable to use a regular charging cable, but I think I could live with that.
in my opinion this seems legit and ok.
Of course it's annoying to remove the cable everytime, but for having wireless charging
l already thought about this on my HTC Eo 3D but did not want to spend too much money on that since it is no Must-have in my opinion.
Qi Enabled Wireless Charger Platform & Charge Receiver Samsung Galaxy Note 10.1 2014
www .amazon.com/Walsontop-Wireless-Platform-Charging-Compatible/dp/B00LC6WGB2 There are still people looking for the holy grail. "Human satisfaction.
you can attach a receiving case to the note 4, so why not the note 10.1 (2014) ?
As Qi supports 15 instead of 5 Watt (since 06/2015), we only need to wait for the next tablet generation. I think in the future we will see Qi on much more tablets.
mgutt said:
As Qi supports 15 instead of 5 Watt (since 06/2015), we only need to wait for the next tablet generation. I think in the future we will see Qi on much more tablets.
Click to expand...
Click to collapse
i think you are looking for this
No, because the quality is poor and it is qi 1.0. I think at the moment there are no qi receiver supporting qi 1.1?! And of course it would be much nicer to have a receiver built-in or under the battery cover.
Am I the only one that doesn't like qi charging? I have it and a pad for my nexus 5 and 7fhd and just don't use it that often. I use my phone often when it's on the charger and qi is much slower than the wire. I just can't see using it
Thats because you're using it wrong. I have 4 Qi pads and they are placed everywhere I stay for a longer time like bed, desk, couch, etc. By that its the most comfortable charging.
And if fast charging is the only reason you need to know that Qi released Version 1.1 with 15 watts (same speed as USB 3.0). But it seems Samsung bought exclusive rights at the moment (Note 5), so we need to wait for other devices supporting it. But I do not miss it.
I've received my universal Qi wireless receiver today. The receiver is smaller than I had thought and fits perfectly into the Moto G. Since our phone lacks internal preparation for Qi (like it can be found on the Samsung Note 2), the connection is made via a micro USB plug. The backdoor can still be clipped on without being disturbed by the Qi receiver pad or its flat band cable. Charging time should be about the about the same as charging the phone from a PC USB port that doesn't output more than 500mA.
This solution is obviously for those who don't need the phones usb port on a daily basis.
The adapter on the left picture (and in the video) is from ebay and is the one that arrived here first. I’ve changed the cable routing to remove the ugly bulge that was visible on my first picture. This adapter outputs a maximum of 500mA and can be purchased from ebay.
Make sure to purchase the "interface layout A, narrow interface up” variant.
http://www.ebay.com/itm/261348107126
17.Jan.2014 - The picture on the right shows an adapter purchased from DealExtreme, that arrived here yesterday. This adapter delivers up to 650mA and the flat band cable comes out of the lower side instead out of the backside which removes the need to bent over the cable.
http://dx.com/p/zy-408-wireless-charging-receiver-for-mobile-phone-micro-usb-black-259151
Both adapters work well, so don't worry if you've already bought the one I've first reviewed. (I have both version in use on different phones)
Here is a small video that shows me placing the receiver inside the Moto G:
http://www.youtube.com/watch?v=U2WPjw-WaCI
Update 13.02.2014
From my testing I can tell the following:
1. An unrooted Moto G needs to be screen locked (I use the pattern lock type) or it will refuse to charge due to the missing pins. You can unlock the screen while it is charging as long as you don't lift it from the qi charger. (tested on 4.3 and 4.4.2, DE and FR firmware)
2. Root in combination with dubidu's tool makes it more straightforward but is not required.
Shadow_2k said:
I've received my universal Qi wireless receiver today. The receiver is smaller than I had thought and fits perfectly into the Moto G. Since our phone doesn't support Qi in any way, the connection is made via a micro USB plug. The backdoor can still be clipped on without being disturbed by the Qi receiver pad or its flat band cable.
This solution is obviously for those who don't need the phones usb port on a daily basis.
Should you wish to buy an adapter for your Moto G, make sure to get the "narrow-interface up" variant
I've also made a short video:
Click to expand...
Click to collapse
Nice. Can you tell us where you got it from -- is it just one manufacturer making these?
Cheers.
I just bought it off amazon (hooray rewards card, it was free).
http://www.amazon.com/Universal-Wir...micro-USB/dp/B00H7FJX7M/ref=pd_rhf_gw_p_tnr_1
Theres a few on ebay if you just look up "Universal QI Wireless Charging Receiver film"
JCBomb said:
I just bought it off amazon (hooray rewards card, it was free).
Theres a few on ebay if you just look up "Universal QI Wireless Charging Receiver film"
Click to expand...
Click to collapse
Thanks. I had looked on fleaBay and it looks like they all have the same packaging. I imagine any qi wireless charger thingy should work. In theory.
anyone know if this would work through an otterbox case? or I guess if this would even work with one due to the fact the part that plugs in sticks out a little bit...
I've bought it here:
http://www.ebay.com/itm/261348107126
The auction uses the same pictures as used in the amazon offer posted by JCBomb, might even be the same seller.
This is cool! I just hope there's like another way we can integrate that wireless charger.
Just saw your post at android.hilfe and started looking for some charger, it's indeed a neat solution.
Universal QI Wireless Charging Receiver film for micro-USB of All Android Mobile (7,99 USD):
http://cgi.ebay.fr/ws/eBayISAPI.dll...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
QI Wireless Charger Transmitter Charging Pad for Nokia Lumia 920 HTC 8X Nexus 4 (15,39 USD):
http://cgi.ebay.fr/ws/eBayISAPI.dll...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Are u guys using this wireless QI receiver? I'm going to buy one next month, D: . Just for curiosity, how much time do u guys spend to get a full charge with the QI
Guys i found this one at dx.com
http://dx.com/pt/p/micro-usb-qi-wireless-charging-back-clip-black-253066
Those kind of product are not so great are chaging, basically it's almost the same power that if you charge through uSB = 500mA.
What you need to check is the charging value, sometime it's :
- 400mA or less (avoid it, will take ages to charge),
- 500mA (just like your regular USB charger),
- 1000mA (great ones, will charge just like a wall charger, twice as fast as the previous model).
So the one at DX is great, but they're cheaper on ebay, plus you can choose between Black or White - http://cgi.ebay.fr/ws/eBayISAPI.dll...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
This one was the cheapest (around £15) I could find and works fine.
http://forum.xda-developers.com/showthread.php?t=2601628
impressive
wow, so cool :good:
Am I the only one thinking about finding the plug they use with all the pins intact and integrating a micro sd card into it for OTG storage? Wireless charging and storage, all in one, and fitting under a case.
I had that exact thought about two hours ago. Throw NFC in their while your at it.
Sent from my XT1034 using XDA Premium 4 mobile app
I had actually started to do some verrrry preliminary research into something like it using a ribbon cable and another usb port, so you could plug the phone into a wall charger and have the usb/sd card piggybacked off the cable. Hadn't gotten very far though...job, kid, wife etc.......
Someone TAKE MY MONEY for it!! Especially since it seems we're all soon to be headed down the 'no sd card' path.
I just got a Moto G for my wife and Nokia Wireless Charging Plate DT900 is not working any ideas why ?
It's not working with one of the universal QI receivers? Have you try enabling the floating charging (see my post)
tomciopaluch357 said:
I just got a Moto G for my wife and Nokia Wireless Charging Plate DT900 is not working any ideas why ?
Click to expand...
Click to collapse
Yes, you also need receiver in your phone.
tomciopaluch357 said:
I just got a Moto G for my wife and Nokia Wireless Charging Plate DT900 is not working any ideas why ?
Click to expand...
Click to collapse
Hello.
The Moto G doesn't support Qi on its own, you'll need to rig it with an universal wireless Qi charging receiver.
You can buy them from ebay, dealextreme and some other china based stores. The first post contains a short installation video.
This one from dealextreme will work (Output up to 650mA):
http://dx.com/p/zy-408-wireless-charging-receiver-for-mobile-phone-micro-usb-black-259151
as well as this one from ebay (Output up to 500mA):
make sure to purchase "interface layout A, narrow interface up)
http://www.ebay.com/itm/261348107126
I just ordered my OnePlus One and pretty happy. I'll miss the wireless charging however, and I've seen these in the past, but think you could put this under the backplate? They seem pretty thin.
http://www.ebay.com/itm/Universal-Q...=100011&prg=10500&rk=1&rkt=10&sd=261348107126
Opinion, or has anyone tried this?? Thanks in advance!
I'm thinking the same thing too. It should fit inside the back cover but I don't know if the nfc pad will interfere the charging. Haven't try wireless charging XD. Another choice is to put that pad under slim back case, should be OK and you don't have to open the 1+1 back cover too. One thing that I concern is the charging rate. With Qi charger, it's going to take forever to fully charge the 1+1. 2A charger vs 500 mA qi charger
kajornkeat said:
I'm thinking the same thing too. It should fit inside the back cover but I don't know if the nfc pad will interfere the charging. Haven't try wireless charging XD. Another choice is to put that pad under slim back case, should be OK and you don't have to open the 1+1 back cover too. One thing that I concern is the charging rate. With Qi charger, it's going to take forever to fully charge the 1+1. 2A charger vs 500 mA qi charger
Click to expand...
Click to collapse
First, search the forums on both on XDA and OnePlus.Net. Already ongoing discussions. That said, I've used a few models, including the one listed here. They charge S-L-O-W. Less than 10 percent per hour. If you do use this, get the model with the long end of the USB connecor facing up towards the screen and the narrow end facing down toward the back.
Please read the other threads before proceeding
kajornkeat said:
I'm thinking the same thing too. It should fit inside the back cover but I don't know if the nfc pad will interfere the charging. Haven't try wireless charging XD. Another choice is to put that pad under slim back case, should be OK and you don't have to open the 1+1 back cover too. One thing that I concern is the charging rate. With Qi charger, it's going to take forever to fully charge the 1+1. 2A charger vs 500 mA qi charger
Click to expand...
Click to collapse
The biggest problem you will have is with the USB plug part. Look at my post history and you will find my thread where I installed on internally. I'm using a 750mA one that seems to charge just fine. It's not as fast as the cord, but it keeps my phone charged all day. I have wireless chargers everywhere though.
First, search the forums on both on XDA and OnePlus.Net. Already ongoing discussions. That said, I've used a few models, including the one listed here. They charge S-L-O-W. Less than 10 percent per hour. If you do use this, get the model with the long end of the USB connecor facing up towards the screen and the narrow end facing down toward the back.
Please read the other threads before proceeding
Click to expand...
Click to collapse
Did you install it under the plate and if so did it interfere with your NFC at all?
4nth0ny said:
Did you install it under the plate and if so did it interfere with your NFC at all?
Click to expand...
Click to collapse
You have to peal up the NFC antenna or it does not work reliably. There is a nice large thread I made in general that you need to read. You question has been answered very thoroughly with testing.
This is the one I bought....waiting on it.....
http://www.ebay.com/itm/181499969555?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The one mentioned in all the posts (the red one) is no longer available in our USB configuration due to QA issues)
Was looking for this, thanks!
http://www.amazon.com/Qi-infinity-Portable-compatible-including-receivers/dp/B00K8HG8YW
So far I am able to get about 8-10 hours of use off my Moto 360 with these settings: (brightness 4 and ambient screen on). I just purchased one of these to help with the battery of the watch. I will be able to charge the watch if I need to when I am out. It will also work to charge my phone so that should come in handy.
Someone should make a super small qi charger for all the qi enabled watches coming out. Maybe 750 MaH or something to give it a full recharge and then have a little extra.
Kinda like Motorola's little key chain thing, but qi
I dig the magnetic Qi charger idea for the iWatch... Why don't more companies play with magnets? It should be magnetic too. I would buy it.
waxlabo said:
http://www.amazon.com/Qi-infinity-Portable-compatible-including-receivers/dp/B00K8HG8YW
So far I am able to get about 8-10 hours of use off my Moto 360 with these settings: (brightness 4 and ambient screen on). I just purchased one of these to help with the battery of the watch. I will be able to charge the watch if I need to when I am out. It will also work to charge my phone so that should come in handy.
Click to expand...
Click to collapse
May be better with this one. $5 cheaper and almost 2x the mAh (7000mAh)
(I was just looking for something like this, but I have a Nokia DT-900 at my desk at work, so its not really needed right now)
http://amzn.com/B00HFTLXPK
I have this one.
http://www.amazon.com/gp/product/B00J409JCM/
daijizai said:
I have this one.
http://www.amazon.com/gp/product/B00J409JCM/
Click to expand...
Click to collapse
does it work well?
does it cut off when full charge?
Will it fry the moto?
Don't know about the last one yet, but it is Qi certified, so it should be OK. It is in my travel bag, so I won't use it on the Moto until I go out of town this weekend. It works well on my N5 though.
daijizai said:
Don't know about the last one yet, but it is Qi certified, so it should be OK. It is in my travel bag, so I won't use it on the Moto until I go out of town this weekend. It works well on my N5 though.
Click to expand...
Click to collapse
I mean, it is used to charge devices with much much larger batteries ...... Are we safe?
Sent from my SM-N9005 using XDA Free mobile app
They need to somehow build the batteries into a band that can somehow discharge via the the charging coil in the watch....
---------- Post added at 02:17 PM ---------- Previous post was at 02:16 PM ----------
crr127 said:
They need to somehow build the batteries into a band that can somehow discharge via the the charging coil in the watch.... Which in turn would recharge the watch...
Click to expand...
Click to collapse
claudioita said:
I mean, it is used to charge devices with much much larger batteries ...... Are we safe?
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
The answer is governed by Ohm's Law
Current draw is regulated by the device not the power source. Ohm's law states that the current through a conductor between two points is directly proportional to the potential difference across the two points.
If you think about mains electricity, you can plug in a high current device like a kettle or heater to the same socket you plug in a low current device such as a phone PSU.
HTH.
I'd love to find a qi-enabled battery pack like this that has embedded magnets, so I can just stick my Nexus 5 to it, and put it in my pocket. True charging on the go. As it is, I either have to deal with a cable that I'm afraid I'm going to bend/break while I'm moving around, or use rubber bands or something to keep the my phone attached to the charger. Anyone find one?
jt3 said:
I'd love to find a qi-enabled battery pack like this that has embedded magnets, so I can just stick my Nexus 5 to it, and put it in my pocket. True charging on the go. As it is, I either have to deal with a cable that I'm afraid I'm going to bend/break while I'm moving around, or use rubber bands or something to keep the my phone attached to the charger. Anyone find one?
Click to expand...
Click to collapse
No, but I can use the watchband on my moto 360 to keep it on my charge battery Doesn't help for your N5, but since this is the Moto 360 thread ~
daijizai said:
I dig the magnetic Qi charger idea for the iWatch... Why don't more companies play with magnets? It should be magnetic too. I would buy it.
Click to expand...
Click to collapse
It's not Qi.
mikefletcher85 said:
May be better with this one. $5 cheaper and almost 2x the mAh (7000mAh)
(I was just looking for something like this, but I have a Nokia DT-900 at my desk at work, so its not really needed right now)
http://amzn.com/B00HFTLXPK
Click to expand...
Click to collapse
This one is well worth the price!
1342
ya that would be sweet
crr127 said:
They need to somehow build the batteries into a band that can somehow discharge via the the charging coil in the watch....
---------- Post added at 02:17 PM ---------- Previous post was at 02:16 PM ----------
crr127 said:
They need to somehow build the batteries into a band that can somehow discharge via the the charging coil in the watch.... Which in turn would recharge the watch...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
mikefletcher85 said:
May be better with this one. $5 cheaper and almost 2x the mAh (7000mAh)
(I was just looking for something like this, but I have a Nokia DT-900 at my desk at work, so its not really needed right now)
http://amzn.com/B00HFTLXPK
Click to expand...
Click to collapse
Yup I picked up this one and have it on my living room couch. Works great.Will probably pick up another one for my office. Now if I can just figure out something that will work well in my car...
mikefletcher85 said:
May be better with this one. $5 cheaper and almost 2x the mAh (7000mAh)
(I was just looking for something like this, but I have a Nokia DT-900 at my desk at work, so its not really needed right now)
http://amzn.com/B00HFTLXPK
Click to expand...
Click to collapse
This is interesting, will order one, thanks for the tip!
Any QI charge pad supports multiple devices charging at the same time?
Would like to use it for my Nexus 5 and Moto 360.
lineager said:
Any QI charge pad supports multiple devices charging at the same time?
Click to expand...
Click to collapse
Read about the Energizer-Dual-Inductive-Charger or search for more yourself.
lineager said:
Any QI charge pad supports multiple devices charging at the same time?
Would like to use it for my Nexus 5 and Moto 360.
Click to expand...
Click to collapse
The Qi 1.2 standard should be out about years end. It will support multiple devices simultaneously and can charge at a distance of about 2 inches. Backwards compatible will charge at a distance of about 30mm ish but still multiple devices.
The zerolemon battery covers the standard pinouts to the QI wireless receiver for wireless charging. Does anyone have a solution, workaround, modification or source for a QI receiver that would work? It is so convenient just to put a phone on a stand and top it off, even with the massive 10,000 mah battery. I am NOT interested in anything that involves soldering anything to my precious phone, or modifying the phone in any way, just the receiver. Thank you in advance for any thoughts!
ebrinkis said:
The zerolemon battery covers the standard pinouts to the QI wireless receiver for wireless charging. Does anyone have a solution, workaround, modification or source for a QI receiver that would work? It is so convenient just to put a phone on a stand and top it off, even with the massive 10,000 mah battery. I am NOT interested in anything that involves soldering anything to my precious phone, or modifying the phone in any way, just the receiver. Thank you in advance for any thoughts!
Click to expand...
Click to collapse
Maybe one of these cheap charging pads can be modified instead of your phone? They dont seem to have one specifically for the note 4 yet on here, but for $6 thats a pricetag you dont have to cringse about when you srtart soldering on it..
http://www.fasttech.com/search?qi inductive charging receiver patch for note 4
Hope it helps.
Basically you have to extend the contacts from the phone back. You don't need to solder. You can do it with double stick foam tape, masking tape, adhesive copper braid or sheeting and the adapter. My adapter has not arrived yet so I am not sure it will fit between the Zerolemon battery and the case back. I did something similar to get NFC working with my Zerolemon on my Note 2. Once my adapter gets here I will report if I am successful and the fix is safe and dependable.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / StarKissed / TWRP 2.8.1.1 trltevzw
lexbian said:
Maybe one of these cheap charging pads can be modified instead of your phone? They dont seem to have one specifically for the note 4 yet on here, but for $6 thats a pricetag you dont have to cringse about when you srtart soldering on it..
http://www.fasttech.com/search?qi inductive charging receiver patch for note 4
Hope it helps.
Click to expand...
Click to collapse
I have 3 pads that fit the original note 4 and work with it, I'm open to any suggestions on how to extend the flexible flat cable -- I can't find a way to do in online anywhere!
ebrinkis said:
I have 3 pads that fit the original note 4 and work with it, I'm open to any suggestions on how to extend the flexible flat cable -- I can't find a way to do in online anywhere!
Click to expand...
Click to collapse
Similar instructions can be found by googling...note 2 zerolemon nfc fix.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / StarKissed / TWRP 2.8.1.1 trltevzw
Don't Modify Anything
Instead of modifying things just use this simple device available on Amazon. Make sure the output matches the requirements of your device before you purchase or it will not work. This is the one I purchased for use with my LG G3 and the ZeroLemon case with the extended battery and it works just fine. You still do not get the NFC capability, but the wireless charging works. But then who actually uses the NFC anyway?
Just search on amazon for micro USB Qi antenna or wireless charging antenna. (the forum won't let me post the link)
This adapter is very easy to install and adds the Wireless Charging / Qi charging back to your phone. Amazon has several versions, just make sure you get the one that has the correct configuration on the plug, either small side up or small side down, and you also need to make sure you get the one with the correct output. For the Lg G3 it is the one with small side down, 5v-1000ma output to make it work properly.
KevinLdrbck said:
Instead of modifying things just use this simple device available on Amazon. Make sure the output matches the requirements of your device before you purchase or it will not work. This is the one I purchased for use with my LG G3 and the ZeroLemon case with the extended battery and it works just fine. You still do not get the NFC capability, but the wireless charging works. But then who actually uses the NFC anyway?
Just search on amazon for micro USB Qi antenna or wireless charging antenna. (the forum won't let me post the link)
This adapter is very easy to install and adds the Wireless Charging / Qi charging back to your phone. Amazon has several versions, just make sure you get the one that has the correct configuration on the plug, either small side up or small side down, and you also need to make sure you get the one with the correct output. For the Lg G3 it is the one with small side down, 5v-1000ma output to make it work properly.
Click to expand...
Click to collapse
The Zerolemon battery covers the ports, making the standard Qi receivers not able to attach to them, that's why we need a different solution.
ebrinkis said:
The Zerolemon battery covers the ports, making the standard Qi receivers not able to attach to them, that's why we need a different solution.
Click to expand...
Click to collapse
Actually, that is not true. I have installed the exact item I was talking about, and it works perfectly fine. The cover over the port does not fit "air tight" over the port and has plenty of room for the adapter to fit between the cover and the phone. This is why I had suggested the item in the post.
KevinLdrbck said:
Actually, that is not true. I have installed the exact item I was talking about, and it works perfectly fine. The cover over the port does not fit "air tight" over the port and has plenty of room for the adapter to fit between the cover and the phone. This is why I had suggested the item in the post.
Click to expand...
Click to collapse
The Note 4 Qi contacts are in 2 places. The upper one, just to the side of the camera, is not covered by the Zerolemon Battery, and does not pose a problem for connecting, but the one next to the battery IS completely covered by the battery itself. Maybe I'm missing something? I don't care about NFC, but would really like the Qi charging feature. If you know of an item that would work, please PM me a link. Thanks!
In case anyone's still wanting to hack a Qi coil on a Zerolemon battery, it works just fine. Here's a step-by-step with pictures. http://traff.as/zerolemonqi
traffas said:
In case anyone's still wanting to hack a Qi coil on a Zerolemon battery, it works just fine. Here's a step-by-step with pictures. http://traff.as/zerolemonqi
Click to expand...
Click to collapse
Not for a Note 4, different contacts (won't work).
I really thought I was in the G3 forum...sorry about that.
They make a qi receiver now that plugs in the charger port of the phone and then flips back to the battery door it's on amazon like 15 bucks. Place case over it to protect receiver and phone any your good to go. I'm sure this will work just fine for ya there a universal qi receiver for tablets and phones with no battery door.
Here is a pic for you.