[Q] Having Trouble Rooting my LG Optims E973 - LG Optimus G (International)

Hi
I am trying to root my LG Optimus G E973 (Bell is my carrier)
I followed the instructions exactly as how it is listed here
http://forum.xda-developers.com/showthread.php?t=2181103
But I got stuck when I ran the root package. And the message I keep on getting is
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Any ideas on how I can resolve this?

debugging should be enabled
should be on charge only when you plug in
when prompt put it on mtp, if that fails put it on software mode, it will work

Related

[Q] SuperOneClick - Samsung Captivate 2.2 issue

Guys, I tried to use SuperOneClick 1.7 to root my Samsung Captivate that is running 2.2 Android. This is the errors I get:
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
OK
Waiting for device...
* daemon not running. starting it now on port 5037 *
OK
Pushing psneuter...
* daemon not running. starting it now on port 5037 *
OK
chmod psneuter...
* daemon not running. starting it now on port 5037 *
OK
Running psneuter...
* daemon not running. starting it now on port 5037 *
FAILED
-------------------------------------------------------
I am running Windows XP /w sp3.
Any assistance or suggestions are greatly appreciated...Thanks
I had I believe the same error a while ago on a LG P500. I gave up and discovered that it couldn't be done because of something LG put on the ROM..

[Q] Root problem evo

Im sure everyone posts about this but i used the one click auto root tool and everything ran fine up until the end when unrevoked forever or w.e its called was running. said it couldnt connect to daemon and now im stuck on white evo screen wont boot, keep trying to run the RUU but fails to run due to battery being under 30%. I was easily 75% charged before everything. Anyone else run into this problem? i just got my evo today and im feeling like i already failed at trying to root.
Note: i previously owned the htc hero, im a bit familiar with this rooting process, yet the evo is a bit tougher.
rooting issues
are you s-off or no?
Did you install the hboot drivers on your pc
Sent from my PC36100 using XDA Premium App
im stuck on step 8 my phone is showing the red triangle with the ! the DOS promt says...
waiting for the phone...
found the phone connected as 'recovery'
setting up a temporary recovery...
**daemon still not runningerror: cannot connect to daemon
*daemon not running. starting it now on port 5037 *
*daemon started successfully *
**daemon still not runningerror: cannot connect to daemon
what do i do?
devlon305 said:
im stuck on step 8 my phone is showing the red triangle with the ! the DOS promt says...
waiting for the phone...
found the phone connected as 'recovery'
setting up a temporary recovery...
**daemon still not runningerror: cannot connect to daemon
*daemon not running. starting it now on port 5037 *
*daemon started successfully *
**daemon still not runningerror: cannot connect to daemon
what do i do?
Click to expand...
Click to collapse
Does it say S-off or S-On?

[Q] Failed first rooting, help please!

I'm sorry if this has been asked before. I tried rooting my phone and this appeared:
Starting ADB server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Checking MTD configuration...
Phone uses the old block size.
Firmware version '3.70.651.1'
Battery is at 100 percent.
The ADB Shell does not have root permissions.
Installing exploit...
Rooting...
Looking for Root...
Got Root!
Checking for needed files...
Pushing res\flash_image to /data/local/flash_image...
Flashing misc partition...
Rebooting in to bootloader...
Verifying bootloader status...
Bootloader shows Firmware Version '1.17.651.1'
hbootpreupdate set at '11'
Verified the phone has the older MTD setup with hBoot Version '2.10.0001'
Verified NAND is locked.
Setting RUU mode...
*
* Flashing Firmware...
*
* It is very important that you do not interrupt this while flashing.
* Unplugging or turning the phone off while it is flashing can easily brick
* your phone.
*
Rebooting...
Waiting for the phone...
error: protocol fault (no status)
** daemon still not runningerror: cannot connect to daemon
** daemon still not runningerror: cannot connect to daemon
** daemon still not runningerror: cannot connect to daemon
Giving the phone time to configure itself...
Rebooting into the recovery...
Waiting for the phone...
** daemon still not runningerror: cannot connect to daemon
** daemon still not runningerror: cannot connect to daemon
** daemon still not runningerror: cannot connect to daemon
** daemon still not runningerror: cannot connect to daemon
** daemon still not runningerror: cannot connect to daemon
It failed and red exclamation mark screen appeared... I tried restarting and after the 3rd try, it worked. I was just wondering if I could try to root again and not brick the phone? I did it once and I'm a bit paranoic... Thank you in advance!
i would use unrevoked.
1. uninstall antivirus, where is my droid, or any app like that from your phone, make sure you have a full battery, if your phone screen is set to time out, change that to never or after 30 minutes(you change that in display settings), make sure you have usb debuging on(settings, apps,manage), uninstall or turn off your computer antivirus
2. download unrevoked
3. install usb/adb drivers from unrevoked site, go to more info on the site and download drivers, then extract to an easy to access folder
4. boot phone into bootloader and select usb at the bottom of the options, then plug to computer and your phone screen should read usb plug, it will try to install driver, select manually on your computer and look for the folder you just extracted.
5. install htc sync on computer and then uninstall it(you only install it for the drivers, but if you dont uninstall it you wont root)
6. right click on unrevoked file on your computer and run as administrator, follow instructions if any and your done.
hope it helps
Honestly had similar problem. Check to see if you have the HTC drivers installed properly. Also apps like PDA NET and other similar drivers can sometimes cause issues. My problem was my USB CORD. It was not connecting properly to my laptop (Toshiba). I went to Sprint store and got a new one. I ran the root program again and it worked fine. This might not be your problem however so, I only rooted a month and a half ago so maybe someone with more experience has more insight, but my USB cable was stock from 2 years ago and was kinda beaten up. Hope you find your answer tho
Sent from my PC36100 using Tapatalk
I just noticed that I get the red exclamation mark when I try to boot recovery. If I follow those steps, it won't mess up Recovery any further?
Sent from my PC36100 using XDA Premium App
Matafeka said:
I just noticed that I get the red exclamation mark when I try to boot recovery. If I follow those steps, it won't mess up Recovery any further?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
That just means that you don't have a recovery. You can't mess up a non-existent recovery, and even if you could, it's easy to flash a new one.
EDIT: Run unrevoked, it'll flash ClockworkMod Recovery for you and should fully root you. If you then want to flash Amon Ra, you can do so via Rom Manager or you can flash a PC36IMG of Amon Ra through the bootloader.
(from... Evo/MIUI/Tapatalk)
Thanks for all the help guys, got it working!!!

[Help] unbrick, Install rom from ADB

Hello guys, I need a lot of help from you guys
Today was changing the rom on my lg e977, but when I was formatting inadvertently deleted the sdcard also. I can access the fastboot and CWM with all the drivers installed, but when I access via adb I get the message
"* Daemon not running. Starting it now on port 5037 *
ADB server did not ACK
* failed to start daemon *
error: can not connect to daemon "
I believe I'm getting this message, because I believe that usb debugging was not enabled.
Anyone know what I can do?
now i'm getting the message:
error: device unauthorized. Please check the confirmation dialog on your device
but i cant boot the phone, so i need to enable usb debugging via adb, right?
Solved! Used this steps:
1 Make sure you have LG United Drivers already installed, otherwise download from below
2 Download Lg suport tool
3 Put your Optimus G into Download Mode by switching it off, attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.
4 when your phones conect to pc suport tool then go to software update
5 Click check in the first option. the program will close and a new one will open,wait for the flash process to finish.
6 you must have a internet conection, the whole process takes an hour or less. the phone will reboot when finish.
Sent from my LG-E975 using xda premium

android tv detected as adb device by pc

Hello
my android tv box is detected as android device by my pc, and it cause me problem with adb command
I've disabled usb debugging and close developpement settings but it still connected by adb via wifi
F:\platform-tools>adb devices
List of devices attached
* daemon not running; starting now at tcp:5037
* daemon started successfully
192.168.100.7:5555 device
Click to expand...
Click to collapse
can you help me please to resolve this problem please ?
Go to dev option and click on revoke.

Categories

Resources