Hey Everyone,
I'm by no means a pro at kernel building but I've put lots of effort into these kernels so I thought I'd share them with you. The Uber kernel will always be updated to the latest Kernel version and will be overclocked to 1890 MHz or 1998 GHz (2 GHz) you decide which option you are willing to do. Unlike some of the other T-mobile Galaxy S II Hercules developers out there, I actually have a Galaxy S II and plan on having it until Summer 2014. This means that EVERY KERNEL I POST HAS BEEN TESTED AND IS WORKING although it might not be perfect (few things in life ever are).
Even though I don't post anything unless it works I still don't want to be liable for user errors. In other words, if you flash one of these Kernels your warranty is void and I AM NOT RESPONSIBLE for any data loss or bricked devices etc. A Clean install is ALWAYS recommended. That does not necessarily mean you can't install these kernels on you current build it just means that you might have problems if you do. Recently apps have been getting corrupted for whatever reason whether on Stock or AOSP and in most cases they cause RRs and SODs. If you find yourself in one of those situations a clean install is the easiest fix. If you want to try and save you apps then connect to you phone while in recovery using adb. Then type adb shell. Now once you are in that shell you can run this command to fix your apps "e2fsck -yfDC0 /dev/block/mmcblk0p25" it could take anywhere from a few minutes to an hour depending on the state of your apps.
[AOSP 4.4.x UBER KERNEL LINK]
UBER 4.1 - 1.89 GHz RELEASE for AOSP 4.4 KitKat
UBER 4.1 - 2 GHz RELEASE for AOSP 4.4 KitKat
All old Kernels can be found on Dev Host via this link (be careful you read file names and descriptions carefully if you choose to take a peek around) http://d-h.st/users/Cl3Kener/
Installation Instructions
**** IMPORTANT!!! USE TWRP 2.6.1.0+ for 4.4 kernels!!! Failure to do so may result in bootloops due to changes made to TWRP to accommodate SELinux in 4.4 ROMs (Links include flashable TWRP installation zips credits to meekrawb. Just flash them in your current recovery! ) ****
1. For best results a install these kernel after a fresh ROM install (although it still should work if you don't do that)
2. Reboot into recovery (MAKE SURE YOU USE THE RIGHT ONE!!! (See red print above))
3. Flash Kernel Zip
4. Reboot and let Settle for ~10 minutes
5. Install Trickster MOD from the App Store for access to all of the options.
6. Change the settings to something other than INTERACTIVE (Especially if you run it with BFQ it will give you the worst screen lag ever). Then enable "Set at Boot" and push the check mark button at the top right hand portion of the screen or else you will lose your configurations.
7. Enjoy!!!
Error Reporting
I am always open to hearing about your errors although just telling me something went wrong without giving me details does me absolutely no good. So here are my expectations if you do want to complain about something not working:
1. Please list the ROM you are using,
2. The IO scheduler you were using
3. The CPU governor you were using
4. The CPU frequency range (192/1080 etc)
5. What you have done to attempt to fix it.
6. If you were able to simulate it again using the same settings.
7. Anything else you think is applicable to the issue
I would also hope that you would consider trying some of the following things to fix your issue before you ever report it because most of these things will fix the problem without me even having to change a thing.
1) Fix file permissions using a program that does a thorough job. I recommend using the fix file permissions in ROM manager because it is the best I’ve seen. For the record, I don’t actually use ROM manager for anything other than fixing permissions. Please consider trying this first because it tends to fix most of the FC/RR/SOD errors you might have.
2) Make a backup and install a clean version of the ROM you are running and see if you are still experiencing those same errors. You may have corrupted files if you’ve been dirty flashing.
3) If that doesn’t solve it, redownload and reflash, maybe something got corrupted but it still managed to flash. This happens sometimes and I can cause you grief.
4) For advanced users pull a logcat. I know not everyone knows how to do this but you can learn if you check out this OP or other ones like it
SPECIAL THANKS TO:
Android88 - because he is awesome and encouraged me to create this thread!
Samsung - for the source code to build these Kernel (and for making the phone)
Ayysir - for his wonderful tutorial on making a bash script to build kernels and for helping me out all of the time with everything!
Elbermu - For Bringing Thermal and Sweep2Wake to Hercules and for the help!
Bmg002 - For his extensive work fixing/rewriting my init.d scripts
Gruntparty - For completely redoing/fixing the build.prop injector I use for my AOSP Kernels
I Am The Frost - For being my first and best tester on xda. He's debugged several issues in these kernels for me
UBER Kernel Repositories can be found at https://github.com/Cl3Kener/HERC-KERNELS and are properly labeled for your convenience (see the branches)
Informational Links
Here is a fantastic guide on "Innards" of Kernels
Optimizing Linaro Keychains
Building a Bash Script to make Kernels
JOIN MY GOOGLE COMMUNITY IF YOU WANT INSTANT UPDATES ON ANY OF ANDROID STUFF I DO.
Reserved!
XDA:DevDB Information
[KERNEL][AOSP 4.4.x][2GHz/1.89 GHz] UBER 4.1 | LINARO 4.7.4, a Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Cl3Kener
Kernel Special Features:
Version Information
Status: Beta
Created 2013-12-02
Last Updated 2014-01-30
Changelogs
Changelogs
Changelog UBER 4.1 Release
- ONLY FOR ANDROID 4.4.2 CM 12/16 Nightlies and beyond!!!!
- Kernel Version 3.0.101 - Linaro 4.7.4 2013.12
- USB fastcharge
- MORE TCP Options "Veno as default
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1890 or 2GHz/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, FIFO, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary, HYPER and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
Additional Info
Terminal commands to enable/change a kernel features if you are don't like kernel tuning apps
Fsync
To enable - echo 1 > /sys/module/sync/parameters/fsync_enabled
To disable - echo 0 > /sys/module/sync/parameters/fsync_enabled
USB Fast Charge
To enable - echo 1 > /sys/kernel/fast_charge/force_fast_charge
To disable - echo 0 > /sys/kernel/fast_charge/force_fast_charge
Set Thermal Values
Go to /sys/kernel/msm_thermal/conf/ in a root file browser and change the values
Set MPDecision Values
Go to /sys/kernel/msm_mpdecision/conf/ in root file browser and change the values
Disable CPU Link
echo 0 > /sys/kernel/cpu_gov_sync/force_cpu_gov_sync
Recommended CPU Govs by Category
For Performance
Performance Governor - Full OC
HYPER - full oc
Lionheart - full oc
For good battery life with decent performance use
Intellidemand
Interactivex
Ondemand
Samsung
Lazy
Moderately Conservative
Badass
Conservative
Wheatley (debatable could be in the above category)
Very Conservative
Powersave
SavageZen
not sufficient info? checkout out this op
Sweet! New kernel!
Sent from my SGH-M919 using Tapatalk
Sweet! Will try this out right now :good:
Flashed beautifully thanks @CI3kener
Sent from my SAMSUNG-SGH-T989 using Tapatalk
gotta love the uber, thank you kener
Sent from my SAMSUNG-SGH-T989
Thank You !
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
JNMM said:
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yes ?
Sent from my SAMSUNG-SGH-T989 using Tapatalk
3 New Performance Boosters
Hey Everyone,
For those of you who haven't heard I've been using "Koding" as my new kernel build server. Space is very limited with my free account but if you'd like you can click here and signup to help me get more free space. You'll also find that you can learn how to code just about anything (java, html5, php, to name a few). Many developers and adding tutorials and sharing their projects so if you are interested in that stuff make sure to sign up!
I've made two nightlies this morning which need testing. For those of you who were around for my 4.3 you might recall that somewhere along the line there was suddenly a curious SD Card Mounting/Unmounting that would happen after unlocking the phone. I had made so many commits in such a short time frame that I was unsure which one caused the error. I've gone back and added my top three performance improving commits from the questionable series to see if any of these three commits caused the error (I certainly hope they did not, I really hope it was caused by the LZ4 compression and not the performance boosters). Let me know if you see any problems as you use these nightly kernels!!! Remember these are for 4.4 ONLY!!!
Here are the links!
UBER 1.89 GHz
UBER 2 GHz
Cheers!
Cl3Kener
just to let you know i have not been getting the sd card error on the 4.4 uber
Signed up on Koding maybe you can teach me a thing of two (^o^)
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Confirmed working on almites cm build
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
BETA2 For 12/16 CM Nightlies and Beyond
Hey Everyone!
Well Team Chopsticks finally got video working although from what I can tell all of the work was actually all done by our very own @bryan2894 who went and found the patches that fixed the video!!! Great work @bryan2894!!! Part of this video fix included the kernel so here is an updated kernel with the patch needed. This kernel will only have fixed video on CM 12/16 nightlies and beyond. I bet it might work with earlier but you might as well update if you are a CM user so what's the point?
Anyhow, enjoy the updates!
Cheers!
Cl3Kener
PS since I know someone will ask, This actually does work great with the 12-14 HellKat build since it also has working video because we grabbed the patches from CM before they were merged.
Sent from my SAMSUNG-SGH-T989
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
That stuff is nonsense. The latest TWRP in fact is much better for this phone and flashing this or any other ROM here IMHO. I tested both CWM and TWRP on more than one occasion and results were identical. For me TWRP is also much easier to get into when you have an issue with a new ROM booting and you need to get into recovery via the power & volume up buttons.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
I've flashed CM11 (my builds) about 10 times in the last month and have been using TWRP 2.6.1.0 since Sept. without issue.
Just don't try to flash TWRP from within GooManager, either flash from recovery or use Odin (best).
Since the video recording is working now I moved to CM11 using the @Almite (Rom) and @Cl3Kener (Uber 2GHz kernel) and I can tel you this is solid Rock combination in performance and stability even those are still in Nightlies/Beta so thank you all for this amazing team work...
Is it possible to add the BLN notification (I know some don't like it but usually this the feature can be disabled)
Thanks
Related
Hi everybody. First of all I'm not developer. I just compile the latest 3.0.50 Virtuous Kernel with smartassV2 and lazy governors for myself but I decide to share it. I was really surprised when I saw only vanilla governors without the new modern and fancy smartass, lagfree, interactivex etc. On my old G1 smartassV2 give really good improve.
If someone doesnt know what are the governors in kernel - please read here.
If somebody wants to test it I will appreciate a lot some feedback. If the result from test isn't so satisfying I will pimp a bit the governor for more battery friendly settings.
My final idea is to pull the kernel with more from the good governors lagree, interactiveX and maybe Intellidemand and then to make pull request. I'm open for feedback and suggestions before commiting the changes.
Install:
Download kernel_with_governors.zip for sense roms and place it on sdcard. Flash into recovery. It's all! Enjoy of your new governors.
Change the covernor:
I recommend for changing the governors using of No-frills CPU Control , AnTuTu CPU Master (both of apps allow scheduler changing) or SetCPU ( search in forum for free version or donate in the market )
Setup:
I feel best performance with smartassV2 governor and deadline scheduler!
My Sources
My GitHUB
update 01.10:
Kernel code name "Hushi" - this kernel deserve some name
Implement DMA Buf - the biggest change in this release. More about Buffer Management
A lot of patches - For more info checkout my github
update 15.08:
Switch to SLOB allocator instead of SLAB
Used latest CB toolchain
update 30.06:
Added force fast charge patch!
notes to get it working :
1 Install Fast Charge app /it is free/
2. The most important - toggle fast charge on and then plug the pc cable otherwise fast charging don't work! /don't be noob like me/
update 24.06:
Added Row Scheduler
Added FIFO Scheduler
update 08.03:
Updated cpu frequency
Added patch to allow lower wifi signals
update 13.01:
Added Lionheart governor
Added interactiveX governor
Added patch for enable swaptoken only when swap is full
Build with CB toolchain instead of linaro
update 12.01:
SmartassV2 governor is set to be default instead ondemand
Added lagfree governor
Enabled BFQ scheduler by request
Added Patch for release swapcache more aggressively
Reboot phone 5 sec after update the kernel
Thanks to:
Linus Torvalds
Virtous Team
yozgatg
-ck
Linaro Team
Sourcery CodeBench
ps I get the kernel sources from yozgatg's git if somebody know more recent repository please to tell me.
ps2 Please have in mind - the zip isn't signed.
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
pyrorob said:
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
Click to expand...
Click to collapse
Thanks for reply. I will ask qriozum for the newer sources For the scheduler I don’t think the bfq is good chose because noop and deadline are more battery frendly than it, or if you use swap cfq work better with swap defragmentation For minimum clock speed I must research more if this is possible Thanks again.
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
ilbeppez said:
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
Click to expand...
Click to collapse
I thins so. I use gen y visionx r3 (ICS 4.0.4). Try it but make backup before flash just in case
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
ineedone said:
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
Click to expand...
Click to collapse
Great, I don’t have really good experience with viperZ rom. For me was a bit slow and laggy I planning to improve few options tonight for more performance but first I will test them.
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
ilbeppez said:
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
Click to expand...
Click to collapse
I dont think so. But if you are disturbed about it the safest way is to do backup in the recovery and if something goes wrong just restore the backup I rarely test new roms but before flash every time I make fresh backup of my current rom if I dont like the new one restoring is easy
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
alexinc said:
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
Click to expand...
Click to collapse
Huh sad news in this case. Can you give me something to see more about those differences?
Neo2SHYAlien said:
planning to improve few options tonight for more performance but first I will test them.
Click to expand...
Click to collapse
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
ineedone said:
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
Click to expand...
Click to collapse
Fo sho big :good: for supercharging. I use it from very log time About the improvements are only kernel related - first i will remove some unnecessary options like himem support( it's needed for system with 4G and more ram ) and some formats this will decrease a bit size and boot time(aron few ms), also I will play with CONFIG_HZ value and enabling of sysvipc, cgroups and bfq scheduler too
Beastmode mod kernel
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Updates and so...
Updated version with lagfree governor, BFQ scheduler and patch for Patch for release swapcache more aggressively is available.
For next version i plan to add ck's Brain **** Scheduler (BFS), interactiveX governor and some ck's memory and swap management patches.
All feedbacks and suggestions are welcome!
ajhavery said:
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Click to expand...
Click to collapse
I will try but right now I don't have enough time for solving drivers issues ( actually I'm weak kernel dev ). Thanks for source.
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
olobex said:
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
Click to expand...
Click to collapse
Thanks. Yes in quick view I saw a lot interesting things, later will dig more deep in the thread.
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
ilbeppez said:
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Click to expand...
Click to collapse
Sad news but will be easy to add all modifications to jerl92's repo. Expect soon version and for aokp Can I ask you for your /proc/config.gz file?? I have need to see compilation options for this kernel maybe and the are different too.
Steven How said:
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
I don't think so. This is kernel for ICS. If you want test with backup and feedback, but I expect issues with GB roms
Donning a new name in favour of the new delicious version of Android... Welcome to the ThunderKat Project!!
Heavily based of my Flaming Monkey kernel configurations and the stock AOSP kernel source, here's my standalone kernel for the Nexus 10. I will maintain this independently.
It will always remain close to the AOSP exynos kernel for manta (Nexus 10) with a few useful tweaks and additions, but will not have any OC/UV, colour controls and any advanced customisation options. It is a stable kernel and will not have frequent updates.
This kernel uses the AnyKernel method and is ROM independent. I have tested this on 4.4 (Stock & AOSP) based ROMs.
Features:
1. Linux Kernel 3.4.39.
2. Based on AOSP KitKat MR1 kernel source for exynos/manta.
3. Built using the Google ARM GCC 4.8 toolchain with -O3 CFLAGS & AFLAGS optimisations & ARM Cortex A15 build optimisations.
4. Enabled Conservative & Powersave CPU frequency governors (in addition to Interactive, Performance & Userspace). Interactive set as default.
5. Preserve correct sysfs permissions on governor change.
6. KSM (Kernel Samepage Merging) support.
7. NTFS, F2FS, EXT4 xattr (extended attributes) support.
8. Networked file systems support (NFS V3, NFS V4 & CIFS).
9. HIDRAW support (supports non-conformant HID devices).
10. Support for more input devices (keyboards, mice & joysticks) including Logitech Unifying devices.
11. Support for USB serial modems (PPPOE).
12. Support for multi-card readers (multi-lun devices). This allows you to mount multiple cards using a multi-card reader. May need an app like StickMount. (Credit @nvertigo67)
13. Removed SWAP support.
14. Removed some un-needed debugging.
15. Increased thermal throttle limits
16. Scalable CPU frequencies
Changelog [2014/08/24]:
1. Built using Graphite optimized GCC4.8 toolchain
2. Added ROW & SIO I/O schedulers
3. Set ROW as default I/O scheduler
4. Upstream F2FS changes
5. Miscellaneous I/O improvements
Changelog [2014/06/05]:
1. Update to AOSP 4.4.3 kernel source (kitkat-mr2)
2. Added F2FS filesystem support
Changelog [2013/12/15]:
1. Update to AOSP 4.4.1/4.4.2 kernel source (kitkat-mr1)
Changelog [2013/11/21]:
1. Initial release
Information:
1. Flash using a custom recovery (TWRP/CWM).
2. This kernel is ROM independent and uses the AnyKernel method. Hence it uses the current ramdisk. You may have issues if this is flashed after a kernel with a custom ramdisk. If so, reflash your ROM and then flash this kernel.
3. Needs an unlocked bootloader.
4. Make sure you have at least 50% battery charge before flashing this.
Download:
ThunderKatKernel-4.4.4-20140824 (AndroidFileHost)
ThunderKatKernel-4.4.4-20140824 (Goo.im)
Archive (4.4.x) - (AndroidFileHost)
Archive (4.4.x) - (Goo.im)
Archive (4.3.x) - Unsupported
Archive (4.2.x) - Unsupported
Source:
GitHub
Disclaimer:
While I have extensively tested this and even though it is heavily based on the AOSP kernel, you may encounter issues. I will try to help you, but I will not take any responsibility if anything goes wrong. Please exercise caution.
Credits:
Google, Samsung, CM, AOKP, PA, ktoonsez, morfic, franciscofranco, Goo.im, AndroidFileHost
Reserved. Just in case
craigacgomez said:
Reserved. Just in case
Click to expand...
Click to collapse
Very cool! I will be trying this tomorrow, will have time to play with it. Nice to see KSM in it.
Nicely done. I'm running your kernel as we speak--snappy, snappy! No issues so far. :good:
Only thing left to do now is give it a catchy name like: "The CRAIGINATOR"
Wow, great news, thanks craig!
brGabriel said:
Nicely done. I'm running your kernel as we speak--snappy, snappy! No issues so far. :good:
Only thing left to do now is give it a catchy name like: "The CRAIGINATOR"
Click to expand...
Click to collapse
Thanks...and yes, I will be renaming my ROM and kernel to something more... well, appealing... when I restart the ROM project...
Once I'm at 50% I'll be all over this like a rash
Sent from my Nexus 10 using xda premium
Great job, runs great! Only issue is it defaults to cfq scheduler on boot even when I have it set to run deadline.
More of a preference than an issue.
This kernel is really good, I was very impressed by your previous Rom and look forward to the new Rom you said will be released later in the year (hopefully!). Your hard work is much appreciated. Using your kernel with Carbon Rom right now and it seems very stable.
Sent from my Nexus 10 using XDA Premium HD app
Yep, snappy, snappy!
Sent from my Nexus 10 using Tapatalk HD
this kernel works best on my N10. no reboot, no SOD and no battery drain.
my tablet is 10 days up without a single problem or recharge! :good:
i hope it will be continued in the future!
Yes, I will continue supporting this kernel... though there will not be many updates... the aim to to remain close to AOSP, yet provide some useful tweaks and additions... I will be building a newer version soon (having problems with the cross compiler on my work laptop, else I would have done it today)...
Hi!
Can I flash this kernel to the stock ROM?
And revert back when new android version comes out to OTA update?
Thank you
teodor_ch said:
Hi!
Can I flash this kernel to the stock ROM?
And revert back when new android version comes out to OTA update?
Thank you
Click to expand...
Click to collapse
Yes, this will work fine on stock...and you can easily revert back using the boot.img from the factory images provided by Google...
Updated release in OP...
Does this have the latest wifi and or gpu drivers? I know wifi drivers are kernel level, not sure about the gpu though. Anyways, its a very nice and smooth kernel. It's been a baron wasteland in mantaland. I guess Google didn't sell many of these.
I just installed the kernel, very smooth, I was having shutdowns on Trinity latest and RootBox. Hopefully is not a ROM problem and this kernel fixes it, I really like RootBox.
Thanks for the awesome work and support.
Erik
situman said:
Does this have the latest wifi and or gpu drivers? I know wifi drivers are kernel level, not sure about the gpu though. Anyways, its a very nice and smooth kernel. It's been a baron wasteland in mantaland. I guess Google didn't sell many of these.
Click to expand...
Click to collapse
I have yet to incorporate the updated wifi and gpu kernel level drivers... I will be working on these soon...
Anyone here with sufficient kernel knowledge to merge the updated mali graphics drivers (http://malideveloper.arm.com/develo...n-source-mali-t6xx-gpu-kernel-device-drivers/)... There are a few updates that are beyond my kernel & C/C++ capabilities... like osk has been replaced by kbase... Please PM me if you can help!! Thanks!
Great work on this kernel! First time reaching 9 hours on screen time. Paired with Mr Robinson AOKP.
StockMOD Kernel for D802 international phones
Suitable for Official LG and LG-based roms ONLY
Only for D802 International models
Features:
- ExFAT support for USB OTG / Card readers with large drives
- CIFS network share mounting supported
- Voltage control support (no built in UV, but configurable via apps like SetCPU)
- Optimised kernel libraries
- MSM SoC + Kernel "always-on" logging and debugging disabled to save CPU cycles
- Simple GPU governor
- Ondemand governor tweaked for lower latency speed shift changes
- Internal kernel function fixes (ie, memory leaks, scheduler fixes)
- SIO scheduler (default, noop, cfq and ROW are available)
- high performance, low latency kernel
- compiled with Os flags and neon-vfpv4 FPU enabled
- Westwood+ TCP congestion control
- Built from official LG v10a kernel source
- Lokified during flash
Installation:
- Download .zip and copy to phone
- Reboot to recovery
- Recommended to take full system backup, including EFS partition
- Flash .zip
- Reboot
- 1st reboot may take a little longer than usual
Please do not:
Do not ask for other models to be supported, at this time is D802 only. Other models may follow in the future
Do not ask for extra features. This is to be a stock-compatible replacement kernel only. If LG didn't add it, I probably wont either.
Do not ask for support of other roms, such as CM / AOSP. Im a LG based rom user, if you want a kernel for another type of rom either use one of the available ones we already have or learn to compile your own.
Download
Download the kernels from my FTP here > FTP Directory
Archive of older versions https://app.box.com/s/k8prx3pyxgd866aidd9x
Changelog:
v3.00
- Carefully rebased, some previously used commits removed
- Back to O2 compression
- (most of) Viking's Ondemand governor settings preapplied
- Added init.d script support
- Fixed battery drain and temperature issue some had
- Reverted to a more stock-like config for less issues
v2.60
- Reverted all VM and ramdisk changes, back to kernel defaults
- Reverts most ramdisk changes, rebuilt from fresh stock ramdisk dump
- Should fix android and network logging
- Decreased Ondemand CPU frequency shift latency to 8ms
- Removed some GPU logging functions
- Stock GPU governor is default
- Full neon-vfpv4 FPU optimisations
- Fixed 3d game problems some had with 2.20+beta 2.50
v2.20
- Some configuration changes
- Some minor system tweaks
- Firewall logging re-enabled
v2.06
- Cleaned up ramdisk
- Sensible, well tested VM and Ondemand values set during boot
- CIFS network mount support added
- Increased vibrator strength
- CPU Sync (idle before rampdown) frequency increased to 1190mhz (default is 960mhz, battery life / heat seem virtually unaffected)
- Simple GPU governor set as default (no longer needs manual activation)
- 99% kernel debugging and logging now disabled. (Android logger still available)
- Ondemand governor is recommended
v2.03
- Once again a complete rebuild
- Fixed CPU utilisation issue with v2.00
v2.00
- Rebuilt from scratch (code cleanup)
- Switched to full neon-vfpv4 compiler flags for fpu
- Switched to Google GCC 4.8 toolchain
- Switched to O2 optimisation level
v1.03
- Fixed audio interference on headset
- Improved UI smoothness
- Faster boot
v1.02
- Added Westwood+ TCP congestion control
- Disabled more debugging and logging for adreno and krait cpu
- More internal fixes
v1.01
- More internal kernel fixes
- Reduced minimum CPU voltage than is user configurable to 700mv (default voltages are unchanged)
- Disabled some ramdisk controlled LG specific logging and debugging (more CPU cycles saved)
v1.00
- First release
Sources:
Kernel sources github > Kernel Github
Ramdisk + Build script > Ramdisk Github
Credits and thanks:
- LG
- Wootever (for loki flash scripts and binaries, and some elements of the build script)
- Faux123, Gokhanmoral, franciscofranco and the CM team for some commits
If you want to return to the original D802 10b International kernel please download and flash the zip attached to this post
reserved2
Hi,
Yeah!
Glad to to have been a tester
Thanks for your kernel! This one looks great
viking37 said:
Hi,
Yeah!
Glad to to have been a tester
Thanks for your kernel! This one looks great
Click to expand...
Click to collapse
thank you for being a patient tester! your feedback was appreciated, as well as the time you have been testing it for me. :good:
g.lewarne said:
thank you for being a patient tester! your feedback was appreciated, as well as the time you have been testing it for me. :good:
Click to expand...
Click to collapse
Re,
You're welcome
I just saw that you had added SIO i/o scheduler, thanks for this... It has always worked well for me, I mean for my devices
viking37 said:
Re,
You're welcome
I just saw that you had added SIO i/o scheduler, thanks for this... It has always worked well for me, I mean for my devices
Click to expand...
Click to collapse
ah yes, thanks for the reminder, will add that to OP
I have flashed this kernel combined with your ROM and so far so good.
Love the rom. Trying the kernel!.
Sent from my LG-D802 using Tapatalk
Bootloop after installing kernel.
Sent from my LG-D802 using Tapatalk
gentlemandroid17 said:
Bootloop after installing kernel.
Click to expand...
Click to collapse
Hi,
Weird, no issue here. You are the first
Maybe a bad download?
EDIT: you are on LG based rom, right?
Agreed. Flashed on Rayglobe 2.6 about 2 hours ago and have been running fine since.
Sent from my LG-D802 using Tapatalk
I also have Bootloop after installing kernel.
installed on the : [ROM][Stock][LG-G2 D802 international] StockMOD rom, Fast, Fluid, Lagfree - v1.06
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Are you guys running any "set xxx parameter on reboot" type of apps ?
I've been flashing these kernels, as have my esters for nearly a week and have not had any issues with them. The only thing I can think is you have an app which is trying to do something on boot up....
My phone was stock fresh, full wiped, installed my rom, then all the test kernels and 0 issues
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Click to expand...
Click to collapse
I just tested, no bootloop after reboot...
You have not flash something else (a tweak or a mod) or modifying something? Undervolt (too much and set on boot)?
I don't know, maybe wait g.lewarne...
viking37 said:
I just tested, no bootloop after reboot...
You have not flash something else? A tweak/mod? Undervolt (too much and set on boot)?
I don't know, maybe wait g.lewarne...
Click to expand...
Click to collapse
im starting to wonder if there are some subtle phone hardware variations that we are not aware of... ? (and im not talking 16/32gb since kernel is the same according to LGs sources)
either that or its is some app installed trying to do something funky....
@ g.lewarne, exept the CPU binning, I don't know
viking37 said:
@ g.lewarne, exept the CPU binning, I don't know
Click to expand...
Click to collapse
IKR
I mean, in Wootevers kernel thread there have been similar reports of sporadic non-compatability and although our kernels are quite different, the basic hardware controlling bits are the same. Even if the SoC had different variations, why would the stock LG kernel work for everyone when one built from their own source wont ?
Its either an app, or the sources LG share are not the "real" ones they use, which I have some suspicions about for other reasons
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
is your phone a branded phone ?
[KERNEL][4.4] Kernel755 | KerKat | 30/7/2014
Welcome again, to the magical world of kernels.
Kernel755
Adventure time!
AMAZE FEATURES:
CPU OC to 1890 MHz
-O2 optimized!
GPU OC, both 3D and 2D
Over- and undervolting supported!
Moar to come!
WOW! DOWNLOADS:
http://bit.ly/cm11kernel
You are encouraged to add this to your own Drive -- it makes downloading way easier.
SIRIUS DISCLAIMER!
Code:
You are free to use this software, but it's not my fault if (when) you mess something up (because let's face it, you will mess something up).
Please be careful, KerKats are a rare new creature. They might bring lots of fun. Or explosions. Exploding cows not covered in warranty. Also, there is no warranty.
Kernel sources: https://github.com/someone755/android_kernel_sony_msm8x60/tree/cm-11.0
XDA:DevDB Information
Kernel755 - KerKat, Kernel for the Sony Xperia S
Contributors
someone755
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r2x
Stable Release Date: 2014-07-27
Current Beta Version: a4x
Beta Release Date: 2014-07-30
Created 2013-12-21
Last Updated 2014-08-01
And now, a FAQ. @franciscofranco's FAQ, updated to fit our device.
F.A.Q. - Read this before complaining!
1. My phone exploded, HALP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post or, preferably, post all of that under the "Bugs" section of DevDB and either post a memo of that in the thread or PM me. Logcats are useless for Kernel purposes, don't bother posting them.
2. OMG BETTARY SUCKZ, IT DEAD IN 45 MINUTAS, HALP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: It's zipped so it's flashable via recovery, though you may also extract the kernel and fastboot flash it. Some alphas come in the form of .elf, though it is recommended that you flash them via fastboot regardless of that.
4. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it. Especially if asking a question already answered on the first page.
5. Touch Control doesn't work in rXXX release, you suckas, fix plixe!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. But what I do have are a very particular set of skills; skills I have acquired over a very long career. Skills that make me a nightmare for people like you. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
6. What's up with the kernel's name?
A: Well I have '755' in my name. So there's that... KerKat is something like "Kernel" plus "KitKat". This was my best idea at midnight.
7. I'm on stock/CM10/CM9/GB and this kernel doesn't work.
A: This kernel is ONLY for Cyanogenmod 11 and any ROMs that came of it (like AOKP, for example). Don't flash on anything else unless you are SURE the ROM is based off of OpenSEMC's CM11.
8. My Locked-bootloader phone won't boot with this/I can't flash it.
A: This is a custom kernel. It requires an unlocked bootloader.
9. What app do you recommend for dealing with CPU settings?
A: Use TricksterMod. For 2D GPU OC and setting the 2nd CPU core's governor, I recommend Kernel Tuner. Both are feature-packed and free, and if you don't mind an extra icon in your drawer, I say get both.
10. What is the difference between releases marked as a# and r#?
A: The r# releases are considered the most stable, but do not pack all the features newest features because my work is rather slow; I'll add an alpha, an a# release, every time a minor change is introduced. But even if they look and feel stable, do not consider them as such, despite some of them being flashable through recovery. Most of them are dirty builds!!! Meant for advanced users only!
11. I want to support you and your work!
A: Putting a subtle sign in your signature that you're using my kernel (or like it or have/had used it). Please, no big banners or anything, just the name of the kernel. That would be appreciated the most.
12. EYE NEEDZ A DISCUSSON THRED; ARHGAHGHAGHHAHGH!
A: This thread serves as both the development and discussion thread for this kernel. Non-dev discussion is allowed, but please do stay on topic.
And now, thanks!
@RaymanFX -- helping me with nearly all issues and, of course the kernel sources. Also for an old project from which I learned how proper GPU OC is done.
@abcdjdj -- writing a neat tutorial on how to compile kernels, and telling me about the -w flag
@letama -- adding a few new words into my dictionary (initramfs=ramdisk, did you know that!? ) and a heap of other stuff
@hei1125 -- the NOVA kernel, and its' sources
@Forzaferrarileo -- his kernel, Forzaferrarileo
@IAmTheOneTheyCallNeo, @fusionjack and @DJLamontagneIII -- for detailed toolchain and compiler flags explanation
@franciscofranco -- for inspiring me to get this done
@Wendigogo -- for SCSI and USB fixes help
@cronot -- lots of helpz
@aebob -- awesome logo idea
@thicklizard -- helping with -O3
@deedwar and @DooMLoRD -- their work on CPU overclocking
Sony and Google -- Android rules
HTC -- Inventing S-ON, forcing me to buy a Sony phone :3
@all -- for being an awesome community! C:
LOL, it's a changelog.
Code:
a4x:
-compatible with OpenSEMC CM11 Beta 3.5 only
-remove all features except for CPU, GPU OC, reboots (supposedly) fixed
-A: all features except for voltage added back
-A: (figured out a way to not make the changelog confusing as fook)
-B: Intelli_plug working and updated
-B: simple GPU governor next to the stock ondemand and performance ones
-C: features added back again
-C: kernel-based MP-Decision, enabled by default
a2c-a3a:
-failed attempts at WiFi module compatibility for Carbon and new Unofficial CM11 builds by whitexp -- need to flash original CM11 modules to use kernel for both (thanks to @piyush95)
-enabled FSync and added fixes for it
-fix for CPU1 jumping around and not sticking with settings
a2b:
-compatible with OpenSEMC CM11 Beta 3.5 only
-*experimental* optional fastcharge
-ye olde potato logo
-MP-Decision now disabled by default
-^brings a TODO: update/fix intelli_plug/incorporate kernel-based MP-Decision
r2b:
-compatible with OpenSEMC CM11 Beta 3.5 only
-*experimental* enabled intelli_plug (disable MP-Decision to enable intelli_plug)
-hopefully fixed reboots and SOD
-downloads moved to public Google Drive folder
r2: [URL]bit.ly/r2kitkat[/URL]
-compatible with OpenSEMC CM11 Beta 3.5 only
-CPU OC back thanks to work by @deedwar.
-both 2D and 3D GPU OC
-GPU governor -- again, note that there is only one so leave that setting as it is!
r1: [URL]http://bit.ly/1aae0xy[/URL]
-no CPU OC
-removed extra schedulers
a1: [URL]http://bit.ly/1ckwMnR[/URL]
-initial release
--O3
-CPU OC (1.7GHz)
-All governors from POTATO (4.2.x) and PIE (4.3.x) kernel (lots of 'em)
-All schedulers from POTATO (4.2.x) and PIE (4.3.x) kernel (zen, fifo, fiops)
You be cray bro! Can't wait for your first r#!
Sent from my amazing Xperia S running RaymanFX's 4.4
Don't know what's wrong but this Kernel made my phone lagging as hell and unusable..
My rom is untouched cm11.
---------- Post added at 04:01 PM ---------- Previous post was at 03:50 PM ----------
Okay looks like the "Hyper" governor caused all my problems.
But also with other governor it laggs and cpu always stays at 384 mhz and gpu always on 177 mhz. This happens even with "performace" governor.
Even recovery laggs as never before. This kernel has many, many problems for me.
Also flashing just the open semc zip takes verry long, it's flashing for five minutes now!
FAQ, points 1, 4 and 5.
You should show some respect, I didn't say anything against you I just reported my problems.
FAQ number 4.
There's a reason DevDB exists. You wanted to report a problem? Use what is to be used.
I give respect where it's due. And so should you.
I'm here with my phone and can't use DevDB.
Hi
Can you make it as a flashable zip please
Sent from my Xperia S using xda app-developers app
zaidx said:
Hi
Can you make it as a flashable zip please
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Read F.A.Q. #10 xD
Sent from my Xperia S using xda app-developers app
moe18 said:
Read F.A.Q. #10 xD
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Haha thanks
Just noticed
Sent from my Xperia S using xda app-developers app
androidlover007 said:
I'm here with my phone and can't use DevDB.
Click to expand...
Click to collapse
I'm here with my phone too and I can use DevDv. Please use browser.
Sent from my LT26i using xda app-developers app
bitoyz13 said:
I'm here with my phone too and I can use DevDv. Please use browser.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Comic sans as main font wtf
Great
Good work
@someone can u please provide me link to kernel for ( android 4.2.2 ) plzzzzz
Do a search. Not my rules, XDA's.
I make a new thread for every version, if that's what's confusing you...
someone755 said:
Do a search. Not my rules, XDA's.
I make a new thread for every version, if that's what's confusing you...
Click to expand...
Click to collapse
I tried but I can't find it, cmon man please just provide me the link
Edit: never mind I tried the search button again and whhoooop... "there" I found kernel
Antutu score??
Xperia S1
Benchmarks are a way of wasting time. AnTuTu, at least. And Quadrant.
You are free to test and compare, scores vary by device, so a score of mine means nothing to you,
AOSP RIN Kernel for D851
Close to stock with some sugar added ... delicous!
Hey guys and girls,
here is my attempt to build up on the cm source for an modified AOSP kernel, hope you like it, have fun
First of, DISCLAIMER, I'm not responsible for bricked devices, dead unicorns, rainbows with missing colors, world war, nose bleed, void warranty (you know that already, don't you? your warranty is void now and it's your fault ) or any other harm happening to your device, you or people around you!
What does it serve? (Features)
AnyKernel
Kexec Hardboot patch
FauxSound support
OC to 2.7GHz and UC support
Voltage control
Intelliplug
Cpu limiter
GPU Overclocking to 675Mhz
Simple GPU Algorithm
Simple_ondemand GPU Governor fixed
fsync on/off support (on by default)
Power efficient workqueues
Dynamic management of dirty page writebacks
Dynamic Read Ahead
IO Schedulers
CFQ
DEADLINE
FIFO
FIOPS
NOOP
ROW (default)
SIO
TRIPNDROID
VR
ZEN
Governors
Adaptive
Conservative
DanceDance
Intelliminmax
Interactive (default)
Lagfree
Lionheart
OnDemand
Performance
Powersave
SmartassV2
Userspace
Wheatley
Smartmax
TCP Congestion Algorithms
BIC
Westwood+
Vegas
Veno
Yeah
HTCP
Cubic (default)
Reno
LiveSharpening
2-Way Call Recording support
exFat support
DriveDroid support
KSM
android logger sysfs toggle (disabled by default)
Many under the hood fixes
Stability
More to come
How to apply it? (Installation)
IMPORTANT: Read through all the requirements, steps and warnings before you do anything, if any requirement doesn't match or you don't know what one or more of the steps below mean or do, ask before you do any of them, if you don't know how all the steps can be done, let it be, I warned you, if you don't do and something bad happens, I'll just laugh at you!!
Requirements? Yes!
D851
Custom Recovery
AOSP based lollipop ROM (Mainly cm12 based)
How to flash the kernel?
BEWARE to be on the default kernel of the given ROM (NO custom, except at updates of this one!!) when flashing this kernel, the ramdisk is taken from the currently flashed kernel!!!
Download zip
Place on internal or external SD
Reboot to recovery
Choose install zip
Search for the downloaded zip
Confirm flashing
Wipe cache
Reboot
Have fun
Changes? (Changelog)
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
13.01.2015/1.6
Initial AOSP release
Full list of commits can be found here
Where to get it from? (Download)
google drive | AndroidFileHost | dev host
Let me test!! (Beta Testing Community)
Google+ LG G3 Beta Testing Community
Show me the so(u)rce(ry)! (Source Code)
https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Donators (huge thanks, you're simply great )
@Toneman07
@Helloworld294
@shaarky
@Dreamxtreme
@guyd
@mosincredible
@tobitege
@AndroidUzer
Credits
XDA for the great community
Google for their great operating system
LG for the great device
CyanogenMod for the base this is built up from
@invisiblek for his marvelous job on the bring up of the device and the many patches
@HolyAngel for some commits I used
@faux123 for his great work with intelli* and beyond
@KAsp3rd for some commits I used
@myfluxi for some commits I used
@trialsrider1 for some commits I used
@Skin1980 for his breakthroughs at our device, his support and for being such a nice guy
@Lord Boeffla for some commits I used
@GuneetAtwal for some commits I used
@DooMLoRD for some commits I used
@Fechinator for some commits I used
@savoca for AnyKernel, Livesharpening and some other stuff
@Christopher83 for his implementation of Dynamic management of dirty page writebacks and some additional stuff
If you like my work, please show your appreciation by pressing the thanks button, if you want to do more, i've nothing against a little donation, but I'm as happy when you just thank me by pressing the button
XDA:DevDB Information
Rin Kernel AOSP, Kernel for the T-Mobile LG G3
Contributors
Tectas
Source Code: https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.6.5
Beta Release Date: 2015-01-14
Created 2015-01-14
Last Updated 2015-01-14
Reserved
Awesome thanks. Heard good things about your STK LG kernel. Downloading
razrlover said:
Awesome thanks. Heard good things about your STK LG kernel. Downloading
Click to expand...
Click to collapse
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
arifqur said:
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
Click to expand...
Click to collapse
Sorry, link fixed.
Tectas said:
Sorry, link fixed.
Click to expand...
Click to collapse
Thanks for the link and especially thanks for being the first Dev to include kexec hard boot patch for D851 in his kernel
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Tectas said:
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Click to expand...
Click to collapse
Thanks
Working well so far, thanks :good:
marcdw said:
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Click to expand...
Click to collapse
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Never mind.
Working well with Euphoria.
Thanks for a great AOSP kernel
joshuajones said:
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Click to expand...
Click to collapse
I changed my primary SkyDragon ROM then reflashed kexec kernel and multirom. Discovered my CM11 was still there (cool) then reflashed Fusion.
Flashed RIN kernel but this time I waited. It took much longer than the ROM install.
But all is good. Fusion seems to be running great with RIN.
Thanks.
Sent from my LG-D851 using Tapatalk
Kernel is working great
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Nothing says great batterylife except when it tells me 1 day 19 hours and hasnt been on a charger since 8 am
Nice kernel exelent battery and no complains for now ?
Been off charger all day with light use and its still going strong
scribbles92 said:
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Click to expand...
Click to collapse
Done a few clean flashes since I started using this kernel but I'm not having this problem...