Related
Here you'll find every info about porting of CM7 into our device, the HTC Wildfire S, aka marvel.
Please dont spam, ask or flood here. There is an special support topic for this:
Discussion and troubleshooting
Stable build:
CM 7.2.0-RC0
- Working WIFI, GPS, BLUETOOTH, CAMERA etc.
http://www.multiupload.com/QIVNST6CPE
md5sum - 071834195f4ddb5626a895d2289aa678
Nightly builds available:
http://code.google.com/p/cm7-wildfire-s/downloads/list
Attention!
The only fully supported phone variant atm is MARVEL.
MARVELC/MARVELCT owners need to be a little patient and do not flash this rom until it's fixed (unless they have some dev experience - it's the kernel)
Description
Standard vanilla Cyanogenmod build, no sugar added
- upstream version changed from 7.1 to 7.2
- fixed "camera and flash" error
- removed ldpi stuff
Credits:
Alquez credits: His wife, Cyanogenmod team, Defer, Drowningchild, HCDR.Jacob, PabloPL,Sadman601, RussCrazyRabbit and Dimasi4ka.
I would also want to thank all the donators and people whom i might forgot / i was unable to give official credit!
Click to expand...
Click to collapse
*Mod Edit - Large font size reduced.
Fixes
- Make 1GB memory for apps
1. Download cm7.2 port by alquez
2. Download data2sd installer http://www.mediafire.com/?757066a1516tdkt
3. Factory wipe then install cm7
4. Back up SD card
5. In recovery go to advanced -> partition SD card -> 1024mb
6. Install data2sd
7. Boot into cyanogenmod
8. Restore SD card stuff if anything went wrong
9. Enjoy and click thanks to benjamingwynn for his tutorial.
Click to expand...
Click to collapse
- Speed up your GPS
- Fix by d33ps1x
Reserved for future 2
no more thread suggestion[s]
--bumped--
sighs......
Guys, PLEASE stay on topic and refrain from trolling/flaming, i dont want to see any more posts like the above (which will be deleted as soon as i have sent this!)
Stay on topic, respect each other and i wont have to hand out infractions so close to Christmas.
Thanks.
Hmmmm
2morrow will b the day i'm going to check this ROM
i test it,
good every thing ...
camera battery and etc
Is the same rom of alquez or it has diferent specs?
buber82 said:
Fixes
- Make 1GB memory for apps
1. Download cm7.2 port by alquez
2. Download data2sd installer http://www.mediafire.com/?757066a1516tdkt
3. Factory wipe then install cm7
4. Back up SD card
5. In recovery go to advanced -> partition SD card -> 1024mb
6. Install data2sd
7. Boot into cyanogenmod
8. Restore SD card stuff if anything went wrong
9. Enjoy and click thanks to benjamingwynn for his tutorial.
Click to expand...
Click to collapse
- Speed up your GPS
- Fix by d33ps1x
Click to expand...
Click to collapse
Hey, I'm new to flashing and stuff. I wanted to ask if I can flash and make my memory for apps 1gb without installing the cm rom and not stock RUU 2.3.5 gingerbread?? I really like sense and just can go away from it
Please let me know!
Royal King said:
Hey, I'm new to flashing and stuff. I wanted to ask if I can flash and make my memory for apps 1gb without installing the cm rom and not stock RUU 2.3.5 gingerbread?? I really like sense and just can go away from it
Please let me know!
Click to expand...
Click to collapse
Wrong place to ask. This should be in the general section.
-Get your phone S-OFF with XTC-Clip
-Install CWM recovery (in general section sticky)
-Install root kit (instructions in general section sticky)
-Follow the directions to prepare your SD card for a second Ext partition
-Download and flash data2sd if you want. Blech...
-Download and use link2sd. Yay!
Please bother to read the general section help topics and ask the question in a non development thread.
Thanks.
It's the same
Sent from my A953
buber82 said:
http://www.multiupload.com/QIVNST6CPE
md5sum - 071834195f4ddb5626a895d2289aa678
Click to expand...
Click to collapse
md5sum not matching for the RC0.
$ md5sum htc/*marvel*
aca175e64ff08fcf29165e97e01bf17b htc/unofficial-CM7-marvel-nigthly-20111216.zip
a497f9f1cf969214dd859cbc24422cc7 htc/unofficial-CM7-marvel-nigthly-20111218.zip
2256c884ce065717b7f49b0ecacb2058 htc/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
No market?
You must install the gapps patch over cwm. The apps you find on cyanogenmod weboage.
Sent from my HTC Wildfire S A510e using XDA App
ONeill123 said:
You must install the gapps patch over cwm. The apps you find on cyanogenmod weboage.
Sent from my HTC Wildfire S A510e using XDA App
Click to expand...
Click to collapse
Are you talking about getting Market on the CyanogenMod Rom i need to install the gapps patch?
Yes, if u want to use the google apps in CM you must install the gapps patch you find on webpage.
ONeill123 said:
Yes, if u want to use the google apps in CM you must install the gapps patch you find on webpage.
Click to expand...
Click to collapse
Could someone please post a link to find the gapp? I can't seem to find it...
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
When i use this rom, i can call but i cant get called.
buber82 said:
Fixes
- Make 1GB memory for apps
- Speed up your GPS
- Fix by d33ps1x
Click to expand...
Click to collapse
hello
I do all the steps and I have 8GB SD ..... I want 1GB to EXT and the rest of FAT32, SWAP memory does not put anything? because in another forum they have recommended me 500MB of swap memory.
I tried with 1GB in EXT3, SWAP 150mb and the ROM wasn't going very well.....
What Cy4noobsMod-7.1.3.1 really is? It is Cyanogen for Noobs Mod based on CM7.1 RC3.0 for gio. Yes like its name, it designed for easy and very user friendly purpose. The basic idea I build the latest CM7.1 RC.3.0 ported by phiexz (as I think it's already final or likely will be no more update) and compiled it with the all good things here covered almost all the potentially frustrating common issues to make it as stable as it can be for daily uses basis. I do some few mods but may slightly unnoticeable. It is not a custom-rom. I didn’t change the interface and such. I just want to keep it as original as the origin. The most noticeable thing I did may just enabled bootsound. The rest are minor (but of course important!). OK, let put it simply now all you have to do Just Flash and Play*.
*still there is a pre-condition and some optional follow up action below
Here some features Cy4noobsMod-7.1.3.1 offers:
• Latest port CM7.1 RC.3.0 with the all working features (credit to phiexz & squadzone)
• preinstalled gapps (credit to Msiiek)
• avoid false reformatting sd-ext by cwm-recovery issue when flashing (credit to waqasshahzad1986)
• enabled bootsound (customizable ready)
• fix split screen issue
• S2E ready (no need to mod or reformatting sd-ext partition again)
• avoid potentially market causes reboot issue
• avoid potentially installing application causes reboot issue
• use market 2.3.6 as a default (but still updateable and offer you more optional action)
• fix some other minor common issues
• just flash & play
• noobs, start your 'en-gio-ne'! and say "eat my dust" to your old migraine!!
Click to expand...
Click to collapse
HOW TO INSTALL
WARNING: Dragons Ahead!
But don’t worry the dragon has been tamed. Even dragon is still a dragon, so still don’t be careless & follow the instruction carefully.
First, make sure the pre-conditions fulfilled:
• have any GB 2.3.3 or upper on your device (or any CM7 rom).
• Already made sd-ext partition on your sd-card (and make sure don’t ever let cwm-recovery touch it reformatting again!), recommended use ext4, more over if want to activated S2E (optional). Don't know how to create partition? Go to mr.waqasshahzad1986 section first, believe me he is your best guide here.
• Have cwm-recovery 5.x (recommended px-cwm or px-cwm-v2). You don't have any yet? Please visit mr.phiexz for CM-7.1 RC-3.0 & cwm 5.x section where this rom originally ported.
• Downloaded Cy4noobsMod-7.1.3.1 zip file copied onto your sd card.
Click to expand...
Click to collapse
Download Cy4noobsMod-7.1.3.1 here:
Cy4noobsMod-7.1.3.1.zip
Installation:
• Just Flash & Play!* via cwm-recovery 5.x (press & hold Home+Power button to enter recovery mode)
*no need to wipe or mount anything, install zip from sdcard > choose zip from sd card > CyanoobsMod-7.1.3.1.zip > Yes-Install
• And you just officially 'noobed'! (I mean you already have Cy4noobsMod-7.1.3.1 on your device).
*always recalibrate your battery after flashing any rom!!
Click to expand...
Click to collapse
easy right?
Optional follow up action:
1. Market
If you want to keep market 2.3.6 as your market and don’t want to get any updated, open terminal emulator (pre-installed with your CM7) and type this:
su
pm disable com.android.vending.updater
Click to expand...
Click to collapse
that will disabled your market updater, but you still can enable it anytime if you decided want to get updated. just change the “disable” type to “enable” with the rest script are still the same.
recommended!! do this as soon as possible after flashed before you got updated automatically. if you already updated just uninstall the new market at "setting>applications>manage applications" and hurry type the script or you can activate flight mode so you will not get updated.
You can ignore all the things from the beginning if you want your market soon get updated (you will get your market updated automatically as long as your internet keep active)
2. Activated S2E (sd-ext ext4 needed!)
• Download S2E from market
• Open it and open its menu, setting, checklist all.
• Buffer size value better leave it as default (there is a chance S2E would repel the partition if set more than 256KB)
• Back, open menu again, choose reboot (usually it won’t reboot at your first time, so you may reboot it manually).
• after reboot open S2E again and checklist all (recommended leave the "application data" still uncheck, but you may check it if you want ap2sd extreme activated).
• open menu, choose reboot again (at this time it should be worked).
• and yes now you have your CM7 with S2E activated.
Click to expand...
Click to collapse
You can ignore all the things if you want try any other app2sd like link2sd (even I think it ported optimized with S2E).
Click to expand...
Click to collapse
Issues:
• There’s a known bug on gio that it can’t be helped. Cwm-recovery have a habit to reformatting your sd-ext, but it does not format the card correctly on gio. It may not harm if you not using any app to sd-ext things (S2E/link2sd/ app2sd/… or etc), but it does if you do. That’s why I warn you to avoid cwm-recovery ever touching your sd-ext (ex:wipe/format/restore/...etc). Just format your sd-ext partition into ext4 only using your computer. If you want to do any recovery backup-restore things better use any other apps, like Titanium Backup maybe (sorry it may just my limitation, hope the other dev here can help us there).
Click to expand...
Click to collapse
Notes:
• As it actually designed for noobs, please be wise to use it as it be. Please, don’t try to do silly things to your rom. Don’t try improvised things that some thing to do with your rom like modding or added tweaks. It may ruined your rom (conflict tweaks caution) and please don’t blame me for that. Customize it will be very welcome as long as not touch that area.
• Sure advance users will always have privileges to do sort things (with notes they knew well the risks. sorry noobs, i'm not being double standard here. i'm a noob too anyway). Feel free to have a try my rom for test its stability sir… your reviews would be really very very appreciated.
• Please ignore some grammar error as long as you can understand me.
Click to expand...
Click to collapse
CREDITS
Thx to:
• phiexz accompany with squadzone, who ported this great rom and let us have a great experiences too with it.
• Msiiek (I got inspired from your work sir)
• waqasshashzad1986 (you will be always be my mentor with all your guides and knowledge shares)
• Maclaw & Delanoister (you guys always motivated me with all of your works...)
• And of course all the members here that I may forgot to mentioned one by one
Last but not least... If this work pleased you, don’t shy to hit thanks button. Regards!
added some SS:
explanation (left to right)
1. the version (i use S5660DXKT4 GB 2.3.6 as my baseband)
2. quadrant score: 2037 clocked at min:247 max:787 gov: ondemand
3. quadrant score: 2562 clocked at min:247 max:902 gov: ondemand
4. memory status
5. S2E
6. How the sd-ext mounted look like on Titanium Backup
don't be fooled by its name guys... it noobs by the installation difficulty level...
but it have CM7 fullest potential...
and the most important thing is its stability!!
please have a try and experience it yourself...
(Please take a note: all devices clock stability are vary, please be wise with it!)
-RESERVED-
very nice .if i'm running into problems again with CM 7.2 , this will be the first thing i will try., ty for your work
Hello! First: thank´s for the work!!!! Another thing: i have the Giopro v1.4 on my phone. Can "update" direct with this rom? And the GPS? Work's nice?
nice job bro
thanks for your hardwork
sure don't need partition ext4 again?
okay I'll try
thanks for your work
djph4ntom said:
very nice .if i'm running into problems again with CM 7.2 , this will be the first thing i will try., ty for your work
Click to expand...
Click to collapse
yes, actually that's one of my goal too sir doing this project. i want to made a safety checkpoint for CM7.
that's why i'm using the latest CM7.1 RC-3.0, as long as we can see it look like will be no more any development (already fixed).
currently i'm testing CM7.2 too (build by Mclaw+del-kernell)...
ur welcom...
kompressorgpl said:
Hello! First: thank´s for the work!!!! Another thing: i have the Giopro v1.4 on my phone. Can "update" direct with this rom? And the GPS? Work's nice?
Click to expand...
Click to collapse
ur welcome...
as long as it is GB 2.3.3 & upper based, you already have fulfilled one of the pre-condition sir... yes just do it directly no need to wipe or mount anything... Just Flash & Play!
as for the gps issue you can read the issues section up there...
AskBack said:
nice job bro
thanks for your hardwork
Click to expand...
Click to collapse
u'r welcome bro...
ddiel said:
sure don't need partition ext4 again?
okay I'll try
thanks for your work
Click to expand...
Click to collapse
yup, just do it once only on your computer before flashing it
please take a note don't do wipe or mount anything on cwm-recovery, bcoz it potentially ruined ur partition... so do it just like the motto:
Just Flash & Play!
please try it and ur welcom bro...
einsal said:
please take a note don't do wipe or mount anything on cwm-recovery, bcoz it potentially ruined ur partition...
Click to expand...
Click to collapse
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Wabot said:
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Click to expand...
Click to collapse
You're right after backup it will format ext anyways so all this rom is useless untill new cwm because you still need to use card reader but maybe you can restore from cwm excluding ext partition I dont know anyways I use titanium to backup ext ofcourse maybe Im wrong?
Sent from my GT-S5660 using Tapatalk
Wabot said:
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Click to expand...
Click to collapse
kajjtan said:
You're right after backup it will format ext anyways so all this rom is useless untill new cwm because you still need to use card reader but maybe you can restore from cwm excluding ext partition I dont know anyways I use titanium to backup ext ofcourse maybe Im wrong?
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
much n less...
but not really that useless too... it still plays an important role... actually we can still do backup even some wipe action as long nothing to do to our sd-ext... (i just being cautious)... yes just like kajjtan said...
S2e cant read my ext4 , how ??
Im sure i have ext4 , cos minitool says so !
shuegig said:
S2e cant read my ext4 , how ??
Im sure i have ext4 , cos minitool says so !
Click to expand...
Click to collapse
hm... did you do all the step right?
pre-condition > create ext4 (cluster size 4kb) partition first on your computer
installation > flash the rom with cwm with no wipe & mount??
if there still a problem try to re-do the step...
einsal said:
hm... did you do all the step right?
pre-condition > create ext4 (cluster size 4kb) partition first on your computer
installation > flash the rom with cwm with no wipe & mount??
if there still a problem try to re-do the step...
Click to expand...
Click to collapse
Yes I did.. maybe I shall try tomorrow ..
Sent from the GUN in my pants
shuegig said:
Yes I did.. maybe I shall try tomorrow ..
Sent from the GUN in my pants
Click to expand...
Click to collapse
Flash kernel and it will see your partition it helped to me
Sent from my GT-S5660 using Tapatalk
guys i learned & did some little test about gps setting n tweaks... my self conclusion about it gps is very so depend on location (ex:like the country where we live)... it's hard to generalized the issue... some specific setting/tweak can be optimized on some specific location, but can ruined on the other specific location...
so far i have no problem with the current gps, so i just leave it as it is (with the thoughts it's the best default setting)... i won't counted it as an issue as long there is no report so far...
kajjtan said:
Flash kernel and it will see your partition it helped to me
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
hm... so there is "an issue"...
anw thx mate for the solution!!
einsal said:
hm... so there is "an issue"...
anw thx mate for the solution!!
Click to expand...
Click to collapse
Yeah I was stuck on this activating S2E few days ago free space was showing my ext but S2E not so I have formated my card about 6 times on cwm on windows on linux even on some other software but no luck so I remembered waqas1986(cant spell his nick to hard remember) words to falsh new kernel so all.credits goes to him.
Sent from my GT-S5660 using Tapatalk
kajjtan said:
Yeah I was stuck on this activating S2E few days ago free space was showing my ext but S2E not so I have formated my card about 6 times on cwm on windows on linux even on some other software but no luck so I remembered waqas1986(cant spell his nick to hard remember) words to falsh new kernel so all.credits goes to him.
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
Delans kernal?
Sent from the GUN in my pants
yeah guys... actually there is "an issue"... not with the rom but the s2e itself... (sorry, actually i'm new too to this s2e things)
sometimes there is a chance s2e repel the partition if the buffer size value set default changed... so better just leave it as default... i''ll edited the s2e activation step...
oh yeah u can try some custom kernel from Delanoister, use the kernel for CM-7.1...
I saw a MOD earlier for the CM10 and i thought why not make one ONLY for the MIUI JB.
follow these steps:
1- make a nandroid backup (optional as i tried it and it boots)
2- download attachment, extract it and place build.prob on sdcard
3- open your *root* file explorer and place it into /system , then set permissions to rw-r-r
4- reboot to recovery and wipe cache, dalvik cache and fix permissions (i dont know why but i saw it is needed so just do what i said)
5- reboot and enjoy
Click to expand...
Click to collapse
Description for tweaks and where i got them from:
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/474-list-some-build-prop-tweaks.html
http://forum.xda-developers.com/showthread.php?t=1874269
Click to expand...
Click to collapse
NOTE: I didn't disable Boot animation because i personally like it and i know some people would be sad if i did.
i don't own any of these tweaks i just copied them and decided to share it with you!
TIPS:
1- Go to Rom toolbox(free from Playstore) open memory manager and choose Ultimate from the presets. It will improve multi tasking and a little bit gaming.
2- Try Forfivo's JB Kernel V1.1 i use it and it runs great.
3- I don't know what you guys prefer about governors but i personally love Smartass v2.
4- Use the SD Boost (also in Rom toolbox) boost your sd to 3072 or 2036. (i can't see difference but they say it does change something)
5- I don't actually feel difference after using my build.prob Tweak LOL, but point "1" really shows difference and smoothness.
6- I guess these are enough actually it was enough from "1"
Click to expand...
Click to collapse
Coming soon:
CWM flashable .zip
I will ask AC!D audio technology if i could copy their work to put it here!
Click to expand...
Click to collapse
READ THIS:
There are to ZIP files in the attachments, don't flash any of them just follow the steps above. And use the version of your ROM the file with the name V16 is the original version and the one named V30 is the test of coliv_aja so make sure you know which one you are using.
And please put in mind that if you already have build.prob tweaks backup them before you replace them with this, because this is the build.prob fresh from the ROM tweaked, so you will lose your tweaks(if you had any).
Click to expand...
Click to collapse
if someone has a good tweak (that is not included here) i would be happy to add it.
Guys, who established. Write how it works
Ruxa1987 said:
Guys, who established. Write how it works
Click to expand...
Click to collapse
You mean to write every tweak's detail? Ok I will update it, when I have the chance.
Sent from my GT-I8150 using xda app-developers app
I will have to update it sooner because coliv_aja shared a Rom update to .30, will update as soon as the download finishes( and I will keep the original one for people who are still using it.
Sent from my GT-I8150 using xda app-developers app
Hello there !
Glad that you are having a look at this :good:
I love HTC One V's stock ICS rom with sense 4.0, that awesome camera, battery life, stability and internet pass through feature was too good to be missed!
But the only thing that kept me away from it was the occasional lags due to those awful bloat ware n stuffs which HTC packed with this rom .
So I decided to remove all the “useless/unimportant/optional” apps from the stock ICS rom. :angel:
This worked perfectly fine for me OR should I say that I have no complaints :fingers-crossed:
I changed to Samsung Galaxy Advance recently, I thought of sharing this with my fellow mates in the One V forum as a parting gift to anyone looking for this (more like a pay back to the help this forum has given me).
A big thanks to Lloir and Maxwen, for welcoming me into this forum when I was a newbie (still am, somewhat … LOL). These guys are real champions! :victory:
Once again, I want to make it clear that it is 100% stock ROM with no modifications what so ever, other than the removed bloat ware!
I couple it with the Titanium Kiss Kernel by Maxwen (Latest Version)
Find it here : http://forum.xda-developers.com/showthread.php?t=1765687
Also this recovery file works ONLY using TWRP Recovery by rukin5197
Find it here (if you are not already running on TWRP) : http://forum.xda-developers.com/showthread.php?t=1721749&highlight=twrp
Lastly … I am from India, and obviously this nandroid backup it taken from the “Asia-India” version of HTC ONE V Primo U (GSM version) phone.
So I’m not sure/ignorant whether this might work for other countries or not.
I would be glad if it becomes useful to you guys.
So here it is
http://dl.dropbox.com/u/36249166/HTC ONE V STOCK ICS ROM - LITE !/STOCK.HTC.ONE-V.LITE-abhikm001.rar
Pressing the "Thanks" button is always appreciated if you find this useful :angel:
Interesting :good:
I'll flash and let you know how it goes
scruffy3666 said:
Interesting :good:
I'll flash and let you know how it goes
Click to expand...
Click to collapse
so ... was this of any help to u ? :fingers-crossed:
How
Hey mate
i'm a totally noob here
i want to ask, do i need to flash this like other rom?
because when i go into the twrp, done my wipe, i go to install, and it just not detect this zip
help!
thanks in advance!
chikuera said:
Hey mate
i'm a totally noob here
i want to ask, do i need to flash this like other rom?
because when i go into the twrp, done my wipe, i go to install, and it just not detect this zip
help!
thanks in advance!
Click to expand...
Click to collapse
No
You need to go to restore.
Then click this. Just be sure to flash the correct kernel
Sent from my One V
chikuera said:
Hey mate
i'm a totally noob here
i want to ask, do i need to flash this like other rom?
because when i go into the twrp, done my wipe, i go to install, and it just not detect this zip
help!
thanks in advance!
Click to expand...
Click to collapse
You have to use "Restore" as this is recovery image (Backup).
soham_sss said:
No
You need to go to restore.
Then click this. Just be sure to flash the correct kernel
Sent from my One V
Click to expand...
Click to collapse
xdamar said:
You have to use "Restore" as this is recovery image (Backup).
Click to expand...
Click to collapse
thanks!
---------- Post added at 02:22 PM ---------- Previous post was at 02:17 PM ----------
Okay one more thing, i dont need to flash ics gapps right?
---------- Post added at 03:12 PM ---------- Previous post was at 02:22 PM ----------
okay i have done the restore process
but when i want to reboot (while in TRWP) it said "no OS in installed"
what should i do?
No need to flash gapps on sense
And it shouldn't show that message, try rebooting.. and if it doesn't boot restore again.
Sent from my One V
sorry mate .. was out of station for a few days , so cudnt answer the queries ... but glad that soham did thanks mate!:good:
hi!
i've dropped the file onto the sd card, but for some reason when i tap restore, nothing shows up for me to flash. would someone be able to tell me what i need to do?
thank you!
mintyfresh95 said:
hi!
i've dropped the file onto the sd card, but for some reason when i tap restore, nothing shows up for me to flash. would someone be able to tell me what i need to do?
thank you!
Click to expand...
Click to collapse
make sure its in the TWRP backup folder
it is TWRP>BACKUP>(place the restore file here)
yeah... i dont remember the exact path
but there was something like twrp>backup and some kind of numbered folder
then you have this specific folder containing the recovery files
fire up recovery and it is supposed to work try it :good:
Which kernel should i use ?
soham_sss said:
No
You need to go to restore.
Then click this. Just be sure to flash the correct kernel
Sent from my One V
Click to expand...
Click to collapse
plz tell me exactly which kernel should i use...i tried flashing boot-TK-USB-201212251804 with this kernel..still it does not show the zip file in backup folder...plz help me !!
red de0392 said:
plz tell me exactly which kernel should i use...i tried flashing boot-TK-USB-201212251804 with this kernel..still it does not show the zip file in backup folder...plz help me !!
Click to expand...
Click to collapse
the will not be any zip file ..
Download this file : http://dl.dropbox.com/u/36249166/HTC ONE V STOCK ICS ROM - LITE !/STOCK.HTC.ONE-V.LITE-abhikm001.rar
Extract it
place the folder you get into TWRP/Backups/HTC(somenumber) (if there is no folder like that just drop it in TWRP/Backups) folder and restart in recovery and restore. this is called a NAND backup its not actually a ROM .. its a snapshot of abhikm001's phone .
dont worry about kernel if you already were using a sense rom or if u were successful in flashing boot-TK-USB-201212251804
can u teach me how to change the system into the german language or give me the german language pack? thanks
use root explorer to find the rom.might be in the sd.ext.
onevdavenson said:
can u teach me how to change the system into the german language or give me the german language pack? thanks
Click to expand...
Click to collapse
1. Find "System language"
Press the menu icon.
Press Settings.
Press Language & keyboard.
Press System language.
2. Select language
Press the required language.
3. Exit
Press the Home key to return to standby mode.
Currently using Hell boy kernel do i need to change the Kernel to have this on ?
I am very curious, did it work on any other CIDs (countries) like Europe or anything? Anyone can give a feedback?
abhikm001 said:
Hello there !
Glad that you are having a look at this :good:
I love HTC One V's stock ICS rom with sense 4.0, that awesome camera, battery life, stability and internet pass through feature was too good to be missed!
But the only thing that kept me away from it was the occasional lags due to those awful bloat ware n stuffs which HTC packed with this rom .
So I decided to remove all the “useless/unimportant/optional” apps from the stock ICS rom. :angel:
This worked perfectly fine for me OR should I say that I have no complaints :fingers-crossed:
I changed to Samsung Galaxy Advance recently, I thought of sharing this with my fellow mates in the One V forum as a parting gift to anyone looking for this (more like a pay back to the help this forum has given me).
A big thanks to Lloir and Maxwen, for welcoming me into this forum when I was a newbie (still am, somewhat … LOL). These guys are real champions! :victory:
Once again, I want to make it clear that it is 100% stock ROM with no modifications what so ever, other than the removed bloat ware!
I couple it with the Titanium Kiss Kernel by Maxwen (Latest Version)
Find it here : http://forum.xda-developers.com/showthread.php?t=1765687
Also this recovery file works ONLY using TWRP Recovery by rukin5197
Find it here (if you are not already running on TWRP) : http://forum.xda-developers.com/showthread.php?t=1721749&highlight=twrp
Lastly … I am from India, and obviously this nandroid backup it taken from the “Asia-India” version of HTC ONE V Primo U (GSM version) phone.
So I’m not sure/ignorant whether this might work for other countries or not.
I would be glad if it becomes useful to you guys.
So here it is
http://dl.dropbox.com/u/36249166/HTC ONE V STOCK ICS ROM - LITE !/STOCK.HTC.ONE-V.LITE-abhikm001.rar
Pressing the "Thanks" button is always appreciated if you find this useful :angel:
Click to expand...
Click to collapse
Download link is not working. Please update it fast
using Omni rom now and although its cool but the major things which are battery and gaming sucks big time .which one do you guys recommend I should switch too
isaac clarke said:
using Omni rom now and although its cool but the major things which are battery and gaming sucks big time .which one do you guys recommend I should switch too
Click to expand...
Click to collapse
I use the B513 Rom and its working very smooth and fast better then omni.
B512 Modded
I am using b512 with the Pure Graphic HD, Pure Audio, Pure Performances,Bravia Engine mods(which you can find on the xda forums with a bit of searching(or you can use google and just add xdaforums somewhere in your search string) applied and it works great, it's fast,smooth,great battery life,and the image quality is enhanced ,Gaming Performance is also quite good, I have found no need to even use art runtime.
astrit1 said:
I use the B513 Rom and its working very smooth and fast better then omni.
Click to expand...
Click to collapse
the only problem I have with that paranoid rom is that it keeps disconnecting my wifi .real bummer that
digijedi007 said:
I am using b512 with the Pure Graphic HD, Pure Audio, Pure Performances,Bravia Engine mods(which you can find on the xda forums with a bit of searching(or you can use google and just add xdaforums somewhere in your search string) applied and it works great, it's fast,smooth,great battery life,and the image quality is enhanced ,Gaming Performance is also quite good, I have found no need to even use art runtime.
Click to expand...
Click to collapse
can u please post some snap shot of that modded rom also download link .coz I already have the b512 official but debating myself if I should even try it
Custom Rom
isaac clarke said:
can u please post some snap shot of that modded rom also download link .coz I already have the b512 official but debating myself if I should even try it
Click to expand...
Click to collapse
Lol the rom i mentioned i modded myself I used the b512 rom that is available on the xda forums with the following mods links are:
www(dot)mediafire(dot)com/download/q0a4crr8aq4gm24/PurePerformances%E2%84%A2X_Stock.1.4.zip
www(dot)mediafire(dot)com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_(Rendering_Version).zip
d-h(dot)st/32h
www(dot)dropbox(dot)com/s/l1m3q18g64yb0av/Sonyengines4.0%2B.zip
just use . instead of (dot)
credits for the mods go to original authors( couldn't find original thread of the bravia engine)
, you could too it's easy, you should start with a clean rom aka if possible format the usual parts : cache/dalvik/internal/data/cust , then follow the steps for reinstalling b510>reboot>setup phone> then start with the stock pure graphics hd> then pure performance stock>then pure audio stock and then bravia engine( i know it's a long process but it's definitely worth it in the end+(after you did it once you can just make a backup of your current system by using either Titanium Backup or twrp after you reflashed it so that you can just reinstall it if you ever want to try another rom..
Edit....
sorry i confused myself with 512 it's actually 510 im using (i dld the 512 the other day and saw it in my flash folder so i thought it was the one i was using(sorry for any inconvienience)
digijedi007 said:
Lol the rom i mentioned i modded myself I used the b512 rom that is available on the xda forums with the following mods links are:
www(dot)mediafire(dot)com/download/q0a4crr8aq4gm24/PurePerformances%E2%84%A2X_Stock.1.4.zip
www(dot)mediafire(dot)com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_(Rendering_Version).zip
d-h(dot)st/32h
www(dot)dropbox(dot)com/s/l1m3q18g64yb0av/Sonyengines4.0%2B.zip
just use . instead of (dot)
credits for the mods go to original authors( couldn't find original thread of the bravia engine)
, you could too it's easy, you should start with a clean rom aka if possible format the usual parts : cache/dalvik/internal/data/cust , then follow the steps for reinstalling b512>reboot>setup phone> then start with the stock pure graphics hd> then pure performance stock>then pure audio stock and then bravia engine( i know it's a long process but it's definitely worth it in the end+(after you did it once you can just make a backup of your current system by using either Titanium Backup or twrp after you reflashed it so that you can just reinstall it if you ever want to try another rom..
Click to expand...
Click to collapse
ok just to be clear I install b512 then setup phone .then restart and install everything else using twrp right .
Answer to your Q
isaac clarke said:
ok just to be clear I install b512 then setup phone .then restart and install everything else using twrp right .
Click to expand...
Click to collapse
Yes you must first wipe the usual partitions with twrp and then follow instructions on the xda forum for how to install b510, after you set it up, you install twrp then install the mods without rebooting in between then wipe cache after they install then reboot and enjoy a better p6
Also as requested snaps
Will create and upload more if requested
digijedi007 said:
Will create and upload more if requested
Click to expand...
Click to collapse
can I see the home screen instead .
isaac clarke said:
can I see the home screen instead .
Click to expand...
Click to collapse
homescreen pic added (note i use def Huawei launcher)
if you don't like it get something like next3d launcher or the ported xperia,touchwhizz launchers
digijedi007 said:
homescreen pic added (note i use def Huawei launcher)
if you don't like it get something like next3d launcher or the ported xperia,touchwhizz launchers
Click to expand...
Click to collapse
This is work only with 510 ?? Now I have 512 ... and do I need TWRP if I use chinese ROOT program (VRoot)??
The mods should work with nearly any rom/firmware , look here for detailed instructions for updating and installing mods aswell as rooting
http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511
isaac clarke said:
ok just to be clear I install b512 then setup phone .then restart and install everything else using twrp right .
Click to expand...
Click to collapse
Hi so are you going to switch from omni? If you do here is a more detailed guide : http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511