[Q] galaxy w nothing work - Samsung Galaxy W I8150

my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.

bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
your screen doesn't even turn on ?

can you post sompe picture of that?

if you can go to the download mode (VOL DOWN + HOME + POWER) flash the stock rom through odin

bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app

MayB4ck said:
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
Click to expand...
Click to collapse
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.

mohamed_fattoh said:
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
Click to expand...
Click to collapse
Hey, it's seem your setting wrong, uncheck reset time.

hinfamous said:
Hey, it's seem your setting wrong, uncheck reset time.
Click to expand...
Click to collapse
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.

mohamed_fattoh said:
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
Click to expand...
Click to collapse
Hey,
First put your phone into download mode and plug it in to your PC and make sure Odin recognizes it, then add Ancora.ops in the OPS window and the recovery.tar.md5 in the One package window. Also make sure that One package , Auto reboot and Protect OPS are checked, you should uncheck reset time because i've hear that it is causing some problems. Then just click the " Start " button and sit back, you phone will be back on in few minutes.
Just a question : Did you have any android installed when you corrupted the recovery? If yes, after you flashed the recovery the phone will reboot and will boot into android, if not then just flash the rom file if you already have one in your sdcard/internal storage.
Your phone is soft-bricked, don't worry, it will be back and running again :laugh:
I just corrupted my recovery on my phone on purpose to try if the cwm recovery works. And yes, it worked, so it should work on your phone too.
Good luck flashing your recovery, Please answer back because I want to know if this method worked.
Here are the files, just extract the rar file

Finally i have KitKat!!
Finally Solved!!!!!!!!!!!!!!!!!!!!!!!
After long days and hundred tries, it works finally. The story is as below:
1- I failed to download the CWM 6.0.4.5 directly in this state using ODIN,
2- I downloaded the stock (Yes old 2.3.6 ginger bread ROM) using ODIN. However this version keep rebooting and never completed the start up.
3- With ROM installed now (even it's not booting), i tried to download older version of CWM using ODIN (CWM 5.0.4). It was successful!!
4- I tried to do the restore for my old system, but it failed as i did backup with newer version.
5- I flashed Monster ROM (4.2.2), it works wonderful.
6- I downloaded the CWM 6.0.4.5 finally using ODIN.
7- Now i'm using 4.4.2 on my mobile finally.
Advice: Never do a flashing to your mobile when you are not fully concentrating what you are doing. Also, make sure to download the right tool and ROM for your device.
Thank you for everyone who tried to help me.
Muhammad

Related

[Q] ClockWorkMod - Stuck in Odin Mode!

Hello Everyone,
I'm hoping someone can help me out.
I installed ROM Manager on my phone, and (honestly not sure why!) but I did. When I launched the application, it told me that v. 6.0 was available if I wanted to update - Stupid me, updated ClockWorkMod to v6.0.
Well, everything was fine.. until I decided to use the ROM Manager Backup option - When I rebooted, it got stuck on
"Could not do normal boot"
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFI_LSB: 0X30
WRITE PROTECTION: Enable
Downloading....
Do not turn off target!!
I'm not sure what to do at this point. I've tried VOL UP + HOME + POWER - but it goes right back to this spot. I've pulled the battery waited for 5 mins - then tried the same VOL UP + HOME + POWER - still nothing.
Any help would be greatly appreciated.
Thanks,
Jay
Don't press the home button is the first thing I can think of.
Power + Volume up = Custom Recovery
Power + Volume down = ODIN/Download mode
To get into Recovery mode:
Pull battery
Insert battery but Don't turn phone on.
Press Power + Volume up buttons and hold them until you see the custom recovery prompt in blue lettering in the upper left corner of the S4, and then immediately release the buttons. You should enter into Recovery.
I don't use CWM so I'm not that familiar with its installation, etc. But there are a few threads that go into CWM in detail.
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
JayCapo1-8125 said:
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
Click to expand...
Click to collapse
Here's the TWRP 2.5.0.2 file:
https://hotfile.com/dl/230303459/7ce1553/openrecovery-twrp-2.5.0.2-jfltexx.tar.html
Install with ODIN.
Steps to follow........
Method #1 -
Place file in PDA box*
Uncheck all other boxes.
Press start.
When installation is complete, unplug usb cord and pull the battery.
Insert the battery but Don't turn on the phone.
Place phone in Recovery mode via the Power + Volume up buttons.
Method #2 -
The other way I've read to install TWRP Recovery is:
Place the TWRP 2.5.0.2 tar in the PDA box*
Check the auto reboot box and f time reset box.
Start the installation and let the phone reboot.
I believe the above method is method of choice, but sometimes the Recovery doesn't take, so Method #1 is then recommended.
Here is an explanation why:
http://forum.xda-developers.com/showpost.php?p=41166759&postcount=28
TWRP been having some issues, even the one people claim to be stable. Be caution with that one as well. Let us know how it works out if not can direct you to other recoveries. There are several out there all working flawlessly. Just matter of what you want you know?
mgbotoe said:
TWRP been having some issues, even the one people claim to be stable. Be caution with that one as well. Let us know how it works out if not can direct you to other recoveries. There are several out there all working flawlessly. Just matter of what you want you know?
Click to expand...
Click to collapse
TWRP looks to have worked for me.
But I can see what you mean. I no longer get stuck in ODIN MODE - but I was having issues after dropping a ROM on my phone. Even after successful setup of the ROM, if I decided to reboot just for giggles. It would freeze on Samsung S4 Logo.
Well, I have since fixed this issue:
I believe the reason why I was getting stuck on Samsung S4 Logo on reboot was because in addition to wipe data/wipe cache/wipe dalvik - I also formatted the internal_sd - this is just a theory but my internal_sd regardless of me dumping a ROM on there, after reboot would do nothing - When I went in recovery - internal_sd showed 0MB. Thus, stuck boot screen. Nothing to boot too.
FIX: Installed STOCK ROM, and KERNEL - Confirmed, that reboot works after setting up phone. My understanding is that it installs all the necessary folder structure required. Got the STOCK ROM from: http://galaxys4root.com/galaxy-s4-stock-firmware/
Then followed this root process and recovery:
http://galaxys4root.com/galaxy-s4-ro...g-twrp-method/
Once I did that, booted to recovery did the normal (wipe data/wipe cache/wipe dalvik) then dropped ALPHA ROM on my phone, along with Infamous KERNEL, and everything is great. Reboots like a champ now. -- Still using TWRP, but v. 2.5.0 - (no issues as of yet! )
Glad to see all working out for you
JayCapo1-8125 said:
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
Click to expand...
Click to collapse
When you say "plugged it back up to ODIN" what exactly are you doing. Do I need to download an app to my PC? I am new to this... I'm stuck on the same screen.
Thanks in advance!
sincity said:
When you say "plugged it back up to ODIN" what exactly are you doing. Do I need to download an app to my PC? I am new to this... I'm stuck on the same screen.
Thanks in advance!
Click to expand...
Click to collapse
Install ODIN 3.07 to your pc
Install drivers for your device onto your pc
I'll post a link to the ODIN thread so you can see how it's done
Update:
Here ya go:
http://forum.xda-developers.com/showthread.php?t=2258628
Please read the above thread in the link carefully.
If your device is stuck on a screen, what were you doing prior to get to that state.
First, boot into custom recovery and Wipe cache and dalvik cache, reboot, and see if that helps.
Either way, you should have ODIN on your pc
Biker1 said:
Install ODIN 3.07 to your pc
Install drivers to your device.
I'll post a link to the ODIN thread so you can see how it's done
Update:
Here ya go:
http://forum.xda-developers.com/showthread.php?t=2258628
Click to expand...
Click to collapse
Thanks a million... I'll give it a try! Wish me luck!
sincity said:
Thanks a million... I'll give it a try! Wish me luck!
Click to expand...
Click to collapse
I edited my link above.
You'll be fine.
Any questions, ask in the thread after you read about ODIN and how it works.
Once you install it on to your pc, along with the drivers which enable youropc totrecognize your device you'll find it very helpful when needed.
I have, and so have almost everyone who have ever rooted their devices and/or flashed ROMs, etc
By the way, you are not rooted?
I ask because if you are, you would have used ODIN.
What is exactly wrong now with your device?
---------- Post added at 11:58 PM ---------- Previous post was at 11:43 PM ----------
JayCapo1-8125 said:
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
Click to expand...
Click to collapse
If you go with TWRP, don't use Goo Manager as that will install 2.6.0.0 which has some issues for some, as you probably know.
Install TWRP 2.5.0.2 with ODIN, which I did many months ago, and have had zero issues.
You can install with Mobile ODIN also I believe.
Biker1 said:
I edited my link above.
You'll be fine.
Any questions, ask in the thread after you read about ODIN and how it works.
Once you install it on to your pc, along with the drivers which enable youropc totrecognize your device you'll find it very helpful when needed.
I have, and so have almost everyone who have ever rooted their devices and/or flashed ROMs, etc
By the way, you are not rooted?
I ask because if you are, you would have used ODIN.
What is exactly wrong now with your device?
Click to expand...
Click to collapse
Ok I figured it out... I really appreciate your help! My blood pressure went down! LOL!
Yes my cell was rooted... I used GX4EX by:
Credits:
***Exploit adapted for AT&T by Jortex***
***Original Guide by Open1Your1Eyes0 for Verizon Galaxy S 4***
***Original Exploit by DooMLoRD***

[Q] Please help.Phone soft bricked(?)Cant go in recovery,only downloading/Odin mode..

Members, really done it this time!!!:crying:
I have successfully re flashed stock firmware today 4.1.2 back on the phone. It worked great, thanks to you guys help. :good: Needed to solve a few issues, I was so happy to achieve that.
THEN I tried to root my phone again, and install CWM via ODIN (3.07)I unzipped the CWM file added on the PDA etc . Waited, then FAIL. Phone booted back up a message saying ''Firmware upgrade encounter an issue. Please select recovery mode in Kies, and try again'' With a pic' of a pc and a phone. Have tried to fix with Kies, though no luck, I guess I don't have a recovery system in the phone now
Now I can't boot into recovery mode Tried just goes in the message above.
Lucky though there is a glimmer of hope as I can get into downloading mode/Odin by pressing -volume down, menu, power button.. Says system status ;Official, Current Bin :Custom. Custom Bin Down yes (5 counts)
So I can't use the phone, just in the 'modes' described above.
I am a newbie to this techie stuff, enjoying learning, that said, I lost a lot of possessions n' money last year, and the phone is the only possession I have now, and it's not working now.
If any members have any ideas, if and how I can fix my phone. Please let me know. I am hoping I can use some files to fix(?) with Odin.?
Thanks in advance, and big respect for any help to get my loved phone up and running. Or do you think rather than waste days trying to find info' and fix it, I should get my credit card out and buy another phone?
Sincerely appreciated any help, Alex
Have you used philz recovery or CWM recovery?Which baseband version are you using?
Sent from my GT-I9082 using Tapatalk Pro
And on rr 5.0.3 using evolution kernel 1.5
Update
Tried to sleep, but could not, so burning mid night oil. Thought all I need to do, is reflash firmware, and should be good. Seems like the USB ports/or USB cable is the problem? Seems in Odin it adds/ removed. Tried flashing firemware, then removed 1/4 the way through. Not good...
At least I think this is what happened during CWM /root before.
Going to try to tomorrow day time on another laptop.
If you guys/girls have an ideas/thoughts,please let me know:good:
Thanks, Alex
Ateekujjawal said:
Have you used philz recovery or CWM recovery?Which baseband version are you using?
Sent from my GT-I9082 using Tapatalk Pro
And on rr 5.0.3 using evolution kernel 1.5
Click to expand...
Click to collapse
Thanks for reply ..
Reflashed this today 4.1.2 XAMC7 STOCK from this page http://forum.xda-developers.com/showthread.php?p=43797796
Guess thats the baseband? Can't obviously access settings now to check my device.
Like I said, had just reflashed stock successfully, and had the stock recovery ,then tried to add CWM with ODIN on the download mode, though the download was a fail, maybe as my USB/ports seem to be iffy...? So phone has no recovery, only the download mode and other page as explained above.
No so have not tried those 2 recovery as phone as no recovery at all now !)=
PS In download mode, does the battery still charge, if on the usb cable, ? Worried battery draining away.
Thanks in advance for any help, Regards, Alex
mr_b_alex said:
Thanks for reply ..
Reflashed this today 4.1.2 XAMC7 STOCK from this page http://forum.xda-developers.com/showthread.php?p=43797796
Guess thats the baseband? Can't obviously access settings now to check my device.
Like I said, had just reflashed stock successfully, and had the stock recovery ,then tried to add CWM with ODIN on the download mode, though the download was a fail, maybe as my USB/ports seem to be iffy...? So phone has no recovery, only the download mode and other page as explained above.
No so have not tried those 2 recovery as phone as no recovery at all now !)=
PS In download mode, does the battery still charge, if on the usb cable, ? Worried battery draining away.
Thanks in advance for any help, Regards, Alex
Click to expand...
Click to collapse
Try flashing pawitp's 6.0.4.5 CWM recovery. flash fix-recovery.zip also.
Sent from my GT-I9082 using Tapatalk Pro
And on rr 5.0.3 using evolution kernel 1.5
Ateekujjawal said:
Try flashing pawitp's 6.0.4.5 CWM recovery. flash fix-recovery.zip also.
Sent from my GT-I9082 using Tapatalk Pro
And on rr 5.0.3 using evolution kernel 1.5
Click to expand...
Click to collapse
OK Thanks will try and flash that in Odin. If you have info' info' how I flash it with Odin, do I open in PDA then flash??
If you have the file link, that would be great.. I really can't afford money to buy new phone, and time spend trying to fix phone I should be job hunting. Though need phone for communications as I am stuck in small village, no transport/buses out even..
When I tried to flashflash firmware again, on Odin I get fail message saying ''complete(write) operation failed'' guess phone stuck somewhere from previous mid-download usb fail..
Thanks for any help, Alex
Yes, you beauty'..Thanks..
Flashed the CWM on Odin, then fe flash firmware, now back ' in' the phone ! Ye ha!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Battery was on 17% btw so guess there is no charge on download mode...Need to check cwm installed properly, then
just got to root it again..will wait for battery to top 1st Thanks for your help!!! Respect
just to add (for others knowledge)the problem was a faulty USB port orginally

[Q] Stuck at boot

Please advise what should I do now,
My N5100 stuck at boot, the part where is shows "Samsung GALAXY Note 8.0 GT-N5100", it just stuck there and not boot.
I tried boot into recovery and reset still no use.
I can boot into Download mode as well as PhilZ Touch Recovery though.
What should I flash using Odin to make my Note 8 back to normal again?
Really thanks alot for the guide.
hahnliang said:
Please advise what should I do now,
My N5100 stuck at boot, the part where is shows "Samsung GALAXY Note 8.0 GT-N5100", it just stuck there and not boot.
I tried boot into recovery and reset still no use.
I can boot into Download mode as well as PhilZ Touch Recovery though.
What should I flash using Odin to make my Note 8 back to normal again?
Really thanks alot for the guide.
Click to expand...
Click to collapse
I have been able to get passed the lockup by holding the up volume button after powering on.
keep it held until you get to the lock screen. About a 2 minute wait.
gooberdude said:
I have been able to get passed the lockup by holding the up volume button after powering on.
keep it held until you get to the lock screen. About a 2 minute wait.
Click to expand...
Click to collapse
thanks, I've tried, no help...
I have had similar. For me it just reboots into the custom recovery all the time.
One way would be to flash a new ROM using Android Toolkit
jasonst165 said:
I have had similar. For me it just reboots into the custom recovery all the time.
Click to expand...
Click to collapse
Hi, this happened to me once and what I did is quite drastic, but I flashed a new ROM, as other methods for me simply didn't work ... the time it took to redownload my apps and set up the note 8.0 was minimal compared to the frustration I was having with note 8.0.
I put a rom (omni rom in my case, or you could use whatever you want such as a backup of your old rom) on my sdcard and just flashed it using my recovery (which is twrp, and which I could boot into). Since you can boot into PhilZ recovery, this method might work if you want to do it.
One last thing, the title of my reply mentions the android toolkit (which is now the skipsoft unified android toolkit). I did not have a rom on my device, so I used the toolkit to put a zip file of a rom on my device.
Hope this helps,
hahnliang said:
My N5100 stuck at boot, the part where is shows "Samsung GALAXY Note 8.0 GT-N5100"
Click to expand...
Click to collapse
What did you do before it got stuck at boot, did you try clearing dalvik cache?
Sent from my SPH-L900 using xda premium
Problem solved, just flash the stock rom then all good to go again.
hahnliang said:
Problem solved, just flash the stock rom then all good to go again.
Click to expand...
Click to collapse
Can you help me go through a step by step procedure. I have the same problem with my daughter's tablet.
StellaVillaruz said:
Can you help me go through a step by step procedure. I have the same problem with my daughter's tablet.
Click to expand...
Click to collapse
Download Odin, get the stock rom from http://www.sammobile.com
Boot into download mode, power button, volume down and the home button
Click continue, start Odin, now is the time to connect the tablet to your pc
Uncheck reboot on the left side
Click on pda, the file you downloaded from sam mobile is a zip file, open it to reveal the md5 file, place the md5 file on the desktop so it's easy to find
It should recognize the file in Odin and once it's done it should say succeeded 1
Then unplug the cord and reboot your tablet if it already hasn't done so. Holding down the power button until it turns off should do the trick. Any questions feel free to post here
Sent from my Nexus 6
pls urgent help
pls, is there really no help? my samsung galaxy note 8.0 gt n-5100 is stuck at samsung logo anytime I switch it on. I have wiped the cache and restore factory settings through the use of power key and volume up key with home key to enter the mode. I have also tried using odin through odin mode with the .tar file I got online and followed all the instructions but still I cannot use my phone pleeeaaassseee heeeeeelp me. it is very serious and frustrating. thanks

[Q] the tablet still on no way to turn it off

Hello,
I have a galaxy tab 3.7.0 rootée.
I downloaded and I put it on the external card from my shelf a custom rom. I put my tablet in recovery mode and I made ​​a backup but instead click backup to sdcar1 I chose sdcard0. The backup stopped giving me an error then I immediately reboot the tablet but it hangs logo. I tried turning it off but no way it restarts. I like even put the tablet into recovery mode but the download mode appeared. I flashed the tablet with an official ROM "T210XXAMKE_T210OXXAMK1_XEZ" with Odin307. the flash is done successfully and tablet restarts, update and a tablet is stuck in the logo.
I do not know what to do, help me please. Thank you for reading and responding to my S.O.S
The tablet is still on, no way to turn it off.
hey
imadoid said:
Hello,
I have a galaxy tab 3.7.0 rootée.
I downloaded and I put it on the external card from my shelf a custom rom. I put my tablet in recovery mode and I made ​​a backup but instead click backup to sdcar1 I chose sdcard0. The backup stopped giving me an error then I immediately reboot the tablet but it hangs logo. I tried turning it off but no way it restarts. I like even put the tablet into recovery mode but the download mode appeared. I flashed the tablet with an official ROM "T210XXAMKE_T210OXXAMK1_XEZ" with Odin307. the flash is done successfully and tablet restarts, update and a tablet is stuck in the logo.
I do not know what to do, help me please. Thank you for reading and responding to my S.O.S
The tablet is still on, no way to turn it off.
Click to expand...
Click to collapse
i would recommend flashing the official rom again through Odin but DON'T flash the update.
There must be something in these updates that's broken because i've read quite a few posts like yours.
if anything after you get your tab working again , try to stick with philz advanced recovery, and reasearch
a CUSTOM rom instead of a Samsung update.
hope this helps :good:
moonbutt74 said:
i would recommend flashing the official rom again through Odin but DON'T flash the update.
There must be something in these updates that's broken because i've read quite a few posts like yours.
if anything after you get your tab working again , try to stick with philz advanced recovery, and reasearch
a CUSTOM rom instead of a Samsung update.
hope this helps :good:
Click to expand...
Click to collapse
thank you for your answer.mais I just flashed the tablet with an official ROM. no update. in fact, the tablet is extinguished but does not boot.
I want to know how to put the custom recovery again to be able to reflash. flash it via download only does'nt work . thank you again.
hey
imadoid said:
thank you for your answer.mais I just flashed the tablet with an official ROM. no update. in fact, the tablet is extinguished but does not boot.
I want to know how to put the custom recovery again to be able to reflash. flash it via download only does'nt work . thank you again.
Click to expand...
Click to collapse
okay so, at this point you will need to be as specific as possible in describing the problem and providing the specific
model type/number of your tab.
if i understand you, you are saying you CAN boot into Odin/Download mode BUT when you flash your custom recovery
it fails?
moonbutt74 said:
okay so, at this point you will need to be as specific as possible in describing the problem and providing the specific
model type/number of your tab.
if i understand you, you are saying you CAN boot into Odin/Download mode BUT when you flash your custom recovery
it fails?
Click to expand...
Click to collapse
exactly what happened. i can't put the costom recovery again.
SM-T210
ANDROID 4.1.2
T210XXAMKE
THANK YOU.
hey
imadoid said:
exactly what happened. i can't put the costom recovery again.
SM-T210
ANDROID 4.1.2
T210XXAMKE
THANK YOU.
Click to expand...
Click to collapse
okay so,
get this http://www.androidfilehost.com/?fid=23329332407587567
start odin, put tab in download mode [hold home,power,volume down] when warning screen appears
press appropriate button to enter download mode, connect tab, wait for it to register in odin,
select pda button in odin and navigate to the file above which you just downloaded
be sure that repartition option is NOT CHECKED, and click start.
if odin says md5 sum is invalid when you select the file, rename/remove the .md5 extension then reselect.
hope this helps.

[Q] Stuck in download mode / boot-image

Hi guys,
could anyone please help, I've been playing around quite a lot with rooting and flashing, but now I'm stuck with a problem I can't solve...
Device
Galaxy Tab S 8.4 WIFI (SM-T700 klimtwifi)
Starting point
Flashed CM12 , with CF root and TWRP
Everything ok, but had some trouble with wifi and root, so I wanted to flash a new rom.
Problem
Tried flashing another rom (can't remember if it was AROMA or BlissPop...), but the flashing got stuck.
Now I can only access Download-mode, not Recovery and normal boot gets stuck in the white Samsung-logo, I get past first screen and some other Samsung-animation.
What I've tried
Access to Recovery, not working (I have a stock-backup on internal SD)
Flashed stock image via Odin (T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5). Should be on right now, but no change in working.
Re-flash TWRP via Odin (tar-file)
Have I missed something? Any problem with going back and forth between Android 4 and 5?
F-B said:
Hi guys,
could anyone please help, I've been playing around quite a lot with rooting and flashing, but now I'm stuck with a problem I can't solve...
Device
Galaxy Tab S 8.4 WIFI (SM-T700 klimtwifi)
Starting point
Flashed CM12 , with CF root and TWRP
Everything ok, but had some trouble with wifi and root, so I wanted to flash a new rom.
Problem
Tried flashing another rom (can't remember if it was AROMA or BlissPop...), but the flashing got stuck.
Now I can only access Download-mode, not Recovery and normal boot gets stuck in the white Samsung-logo, I get past first screen and some other Samsung-animation.
What I've tried
Access to Recovery, not working (I have a stock-backup on internal SD)
Flashed stock image via Odin (T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5). Should be on right now, but no change in working.
Re-flash TWRP via Odin (tar-file)
Have I missed something? Any problem with going back and forth between Android 4 and 5?
Click to expand...
Click to collapse
After flashing the stock image, factory reset in recovery again.
But I can't get into recovery, even after flashing stock...
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
F-B said:
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
Click to expand...
Click to collapse
Sounds like one of the partitions is damaged, its strange because when you flash the stock firmware it relays all the partitions, just to verify you downloaded one of the big factory images from sammobile.com that's 1.6gb big, then flashed with Odin the extracted tar file...also you might not have a custom recovery installed if you have so vol up and home n power wouldn't work......
Maybe your way out of this is going the other way, flash a custom recovery through Odin, then get into that and use it to install ironrom which is like stock but cleaner.
F-B said:
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
Click to expand...
Click to collapse
Try pressing power +vol down and up together+home and then as soon as screen goes dark/black press power+vol up+home hopefully that will get you into recovery.
Have you edited to vold.fstab file
---------- Post added at 01:15 PM ---------- Previous post was at 01:07 PM ----------
If you have edited the vold.fstab file then try to flash a stock rom via odin with the pit file of your device.
F-B said:
But I can't get into recovery, even after flashing stock...
Click to expand...
Click to collapse
Just to elaborate when flashing stock through Odin it wipes your custom recovery and root...hence why you need to use auto root again through Odin.
Cheers guys for your inputs! I'll only get my hands on the tab this evening, so I'll test your solutions then and report back-
maxal said:
Try pressing power +vol down+home and then as soon as screen goes dark/black (just before you enter download mode) press power+vol up+home hopefully that will get you into recovery.
Click to expand...
Click to collapse
Thanks, have to try this!
pdolton2000 said:
Sounds like one of the partitions is damaged, its strange because when you flash the stock firmware it relays all the partitions, just to verify you downloaded one of the big factory images from sammobile.com that's 1.6gb big, then flashed with Odin the extracted tar file...also you might not have a custom recovery installed if you have so vol up and home n power wouldn't work......
Maybe your way out of this is going the other way, flash a custom recovery through Odin, then get into that and use it to install ironrom which is like stock but cleaner.
Click to expand...
Click to collapse
Yeah, flashed T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5 2,4gb
Tried flasing TWRP, no difference. Maybe here's the timing as well...
max86533 said:
Have you edited to vold.fstab file
---------- Post added at 01:15 PM ---------- Previous post was at 01:07 PM ----------
If you have edited the vold.fstab file then try to flash a stock rom via odin with the pit file of your device.
Click to expand...
Click to collapse
No clue about vold.fstab, so I seriously hope I haven't edited it
pdolton2000 said:
Just to elaborate when flashing stock through Odin it wipes your custom recovery and root...hence why you need to use auto root again through Odin.
Click to expand...
Click to collapse
Yeah, have to make sure I have done it in right order, Stock -> Root -> Custom Recovery... I've tried so many solutions that I'm starting to doubt myself.
Unfortunately, I find myself in the same situation, I do not know what to do.
Have you flash pit file via odin because maybe your device partitions corrupt during rooting.
F-B said:
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
Click to expand...
Click to collapse
F-B said:
Cheers guys for your inputs! I'll only get my hands on the tab this evening, so I'll test your solutions then and report back-
Thanks, have to try this!
Yeah, flashed T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5 2,4gb
Tried flasing TWRP, no difference. Maybe here's the timing as well...
No clue about vold.fstab, so I seriously hope I haven't edited it
Yeah, have to make sure I have done it in right order, Stock -> Root -> Custom Recovery... I've tried so many solutions that I'm starting to doubt myself.
Click to expand...
Click to collapse
Hi just to add I have just edited the instructions I gave you please read again.
F-B said:
Cheers guys for your inputs! I'll only get my hands on the tab this evening, so I'll test your solutions then and report back-
Thanks, have to try this!
Yeah, flashed T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5 2,4gb
Tried flasing TWRP, no difference. Maybe here's the timing as well...
No clue about vold.fstab, so I seriously hope I haven't edited it
Yeah, have to make sure I have done it in right order, Stock -> Root -> Custom Recovery... I've tried so many solutions that I'm starting to doubt myself.
Click to expand...
Click to collapse
Okay sounds like you've hit a dead end but don't panic your not the first to hit this point with t700.
Okay here's what I want you to do,
1. Open up device manager and completely remove your adb driver making sure to check the "also delete driver " box if shown
2. Download this http://developer.android.com/sdk/win-usb.html the latest Google adb drivers ..DL this ready actually.
3. Completely disable anti virus..remove if you have to, along with windows defender .
4. Restart
5. Download "i know it seems mad" the austrailian firmware http://www.sammobile.com/firmwares/download/43233/T700XXU1ANL1_T700XSA1AOA1_XSA/ and extract the file inside the archieve
6. Right click Odin and run as administrator to be safe.
7. Go for gold and try this...if it works your laughing and can change the firmware or ROM to any local area.
8. If...this doesn't work...restart one last time n try again, if still no then try using another laptop or PC if you can
Good luck keep me updated...I am trying to find you another solution too, got an idea with something called heimdall but not sure as never used it, supposed to be an alternative to Odin.
Hi All, finally had the time to sit down and test your solutions. As it happens, the first (easiest) thing I tried was the timing in pushing recovery boot, according to great help of Maxal. Worked on first attempt, booted into stock recovery, wiped everything and stock rom booted. I was prepared to do it all, so it was funny that a few well-timed presses of buttons solved it .
Now I'm rooted with TWRP and BlissPop again. Thanks everyone for great suggestions and assistance!
I also solved, it was enough to wait for the battery becomes exhausted, recharge the tablet and once off from entering recovery and do a factory reset.
The system is restarted.
maxal said:
Try pressing power +vol down and up together+home and then as soon as screen goes dark/black press power+vol up+home hopefully that will get you into recovery.
Click to expand...
Click to collapse
Man, you're genius! Thanks!

Categories

Resources