hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on
fallen.69 said:
hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on
Click to expand...
Click to collapse
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed
parkourz said:
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed
Click to expand...
Click to collapse
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.
fallen.69 said:
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.
Click to expand...
Click to collapse
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option
parkourz said:
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option
Click to expand...
Click to collapse
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :
fallen.69 said:
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :
Click to expand...
Click to collapse
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?
fallen.69 said:
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?
Click to expand...
Click to collapse
flash SuperSU and try.
MameTozhio said:
flash SuperSU and try.
Click to expand...
Click to collapse
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?
fallen.69 said:
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?
Click to expand...
Click to collapse
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.
MameTozhio said:
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.
Click to expand...
Click to collapse
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?
fallen.69 said:
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?
Click to expand...
Click to collapse
Oh, I thought the problem might have been the superuser app.never mind.
Sent from my Nexus 4 using Tapatalk
parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .
fallen.69 said:
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .
Click to expand...
Click to collapse
I wonder why CPU was coming back to 1,5Ghz after reboot on myONEv...
The governor that is in use makes a huge difference in the running speed. Some will cause the phone to use the maximum speed that you set all the time
Sent from a phone that's running a ROM
Related
First of all wat is meant by KERNAL..., and i heared that by flashing kernal we can get max cpu freq..., Im using HTC WILDFIRE ROOTED CM 7.1.0.1...
I have downloaded the kernel, and i dont know how to flash it.. Is that same as flashing CUSTOM ROM (in recovery mode)????
balaedge said:
First of all wat is meant by KERNAL..., and i heared that by flashing kernal we can get max cpu freq..., Im using HTC WILDFIRE ROOTED CM 7.1.0.1...
I have downloaded the kernel, and i dont know how to flash it.. Is that same as flashing CUSTOM ROM (in recovery mode)????
Click to expand...
Click to collapse
I'm sorry but what are you doing?? Your downloading things ready to flash them even when you have no idea what they are or what they do.
Now I'm not being funny with you but PLEASE!!! Come on, read,research etc etc. If you don't know what or how a kernel is flashed then you seriously should not be messing with it.
P.s. I really don't know what all this obsession is with o/c to Max because then you'll be moaning about battery discharging too fast.
Rolleyes :
"sent from me2u"
balaedge said:
First of all wat is meant by KERNAL...
Click to expand...
Click to collapse
Matey, this has been answered a few times (to say the least) so try using the search bar to see if your question has already been answered, which i know it has.
If you are using CM7.1.0.1 u dont need to flash another kernal because the kernal that comes with the rom is oc'able.
Go to settings > cyanogen settings > performance > cpu
Use my settings in my Sig as a guide. These are tested and stable and battery life is fine. I do not need to OC to the max.
EDIT: I have attempted to OC to the point where my system is stable, I get 2 days battery life, and angry birds plays smoothly
Flash like anything else
balaedge said:
First of all wat is meant by KERNAL..., and i heared that by flashing kernal we can get max cpu freq..., Im using HTC WILDFIRE ROOTED CM 7.1.0.1...
I have downloaded the kernel, and i dont know how to flash it.. Is that same as flashing CUSTOM ROM (in recovery mode)????
Click to expand...
Click to collapse
yes it is like flashing a custom rom except no need to wipe anything
you can download a frequency changer like setcpu
I install Shendu Os custom rom on HTC One V, but the problem is that language is Chinese.Can you tell me how to change this to Englishcos I want to try this rom . I search the threads but didnt find the answer to my question.
http://forum.xda-developers.com/showthread.php?t=2273478&page=11 read carefully
Ruling said:
http://forum.xda-developers.com/showthread.php?t=2273478&page=11 read carefully
Click to expand...
Click to collapse
Oky, the problem was (my mistake) wrong gapps 4.2.2 instead 4.1.2. I have also problem with android keyboard crashing all the time. Gapps solved also.I've tried Shpongle, MIUI... but this is the best by far for me.In Shpongle problem was camera, in MIUI was speed, but here,everything work like swiss watch. Now I want to OC my CPU.With Shpongle 1497 Mhz was full house, but here I can't do this. Can you tell me what app to use for OC. Again, thank you for this wonderfull ROM.
goran.p said:
Oky, the problem was (my mistake) wrong gapps 4.2.2 instead 4.1.2. I have also problem with android keyboard crashing all the time. Gapps solved also.I've tried Shpongle, MIUI... but this is the best by far for me.In Shpongle problem was camera, in MIUI was speed, but here,everything work like swiss watch. Now I want to OC my CPU.With Shpongle 1497 Mhz was full house, but here I can't do this. Can you tell me what app to use for OC. Again, thank you for this wonderfull ROM.
Click to expand...
Click to collapse
Try No-frills CPU.
MameTozhio said:
Try No-frills CPU.
Click to expand...
Click to collapse
yes.
Sent from my HTC T528w using xda premium
Hi my HOX is turning off or rebooting couple times in a day, can I check somehow what is causing this? Is it ROM, or some app?
nyorbee said:
Hi my HOX is turning off or rebooting couple times in a day, can I check somehow what is causing this? Is it ROM, or some app?
Click to expand...
Click to collapse
we need more infos: rooted? if so, rom/kernel/? have you installed mods/custom task or triggers that can reboot the device?
lukes91 said:
we need more infos: rooted? if so, rom/kernel/? have you installed mods/custom task or triggers that can reboot the device?
Click to expand...
Click to collapse
Kernel Next Ep10.0 [Intelliplug] and ROM [30/03/2014] [ROM] [Unofficial] Beanstalk 4.4.2 KITKAT for the HTC One X. I have just couple of standard apps, none of them shoul cause reboots...
Why not flash another rom to test for a while. Preferably a stock like sense 5 rom.....rule out hardware is easy to do yourself
nyorbee said:
Kernel Next Ep10.0 [Intelliplug] and ROM [30/03/2014] [ROM] [Unofficial] Beanstalk 4.4.2 KITKAT for the HTC One X. I have just couple of standard apps, none of them shoul cause reboots...
Click to expand...
Click to collapse
Mr Hofs is right... Just give me another info: have you undervolted your phone? Which is your tegra3 variant? Your mv @1.5GHz?
Sent from Somewhere Over The Rainbow...
lukes91 said:
Mr Hofs is right... Just give me another info: have you undervolted your phone? Which is your tegra3 variant? Your mv @1.5GHz?
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
I didn't do anything just stock ROM settings
nyorbee said:
I didn't do anything just stock ROM settings
Click to expand...
Click to collapse
Ok... I never tried that kernel, but if it"s undervolted and your phone can't handle too much uv it might reboot itself... This is why i asked you the voltage @1.5GHz and the cpu variant... Anyway you could try to increase voltages by 25 mv and see if it's stable... Or follow Mr Hofs' suggestion...
Sent from Somewhere Over The Rainbow...
lukes91 said:
Ok... I never tried that kernel, but if it"s undervolted and your phone can't handle too much uv it might reboot itself... This is why i asked you the voltage @1.5GHz and the cpu variant... Anyway you could try to increase voltages by 25 mv and see if it's stable... Or follow Mr Hofs' suggestion...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
nyorbee said:
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
Click to expand...
Click to collapse
read the OP of the rom thread....we do not have to read that for you ! Look for that info and check it out.....
nyorbee said:
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
Click to expand...
Click to collapse
Uv is managed by kernel, not rom... Anyway, if you flash a sense 5 rom close to stock and leave the default kernel you should be fine... Try something like arhd, maximus HD or lonelyx as they are very similar to stock...
Sent from Somewhere Over The Rainbow...
Mr Hofs said:
read the OP of the rom thread....we do not have to read that for you ! Look for that info and check it out.....
Click to expand...
Click to collapse
I don't see any info about that I've read it...
lukes91 said:
Uv is managed by kernel, not rom... Anyway, if you flash a sense 5 rom close to stock and leave the default kernel you should be fine... Try something like arhd, maximus HD or lonelyx as they are very similar to stock...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Yes but I want KK and stock android, And I don't see if this ROM that I want has Uv in kernel by default or not....
We can't fix this for you, you nave to follow our suggestions to discover the issue's origin and to fix it... Search xda to collect more infos about the rom/kernel you are using....
Sent from Somewhere Over The Rainbow...
hii guys post ur score screenshots
and share what u guys are using to get maximum performance
this will help combine all the best tweaks and make our phone better
My antutu score is 19717 and i am using a custom build of Ultimate rom V 2Z
will post my screens and tweaks in sum
so lets get tweaking
I tried flashing V2 and the keyboard keeps crashing on that rom. Can you check that on the rom ?
gautam703 said:
I tried flashing V2 and the keyboard keeps crashing on that rom. Can you check that on the rom ?
Click to expand...
Click to collapse
go to settings>apps>all apps>xperia keyboard>clear data and cache>force stop
Ashwin Prabhunerurkar said:
go to settings>apps>all apps>xperia keyboard>clear data and cache>force stop
Click to expand...
Click to collapse
Well as soon as i flashed the V2 i cant pass the setup menu. It requires me to use the keyboard, and it's crashing.
go to recovery and select advance backup and only select data
then wipe data after backup
and when after u done with setup
restore data again
Stock rom. Rooted. Unlocked bootloader. Using Greenify, nothing else
Sent from my D5322 using XDA Premium 4 mobile app
Ashwin Prabhunerurkar said:
hii guys post ur score screenshots
and share what u guys are using to get maximum performance
this will help combine all the best tweaks and make our phone better
My antutu score is 19717 and i am using a custom build of Ultimate rom V 2Z
will post my screens and tweaks in sum
so lets get tweaking
Click to expand...
Click to collapse
My Antutu score is 20179 with stock Sony ROM, Maximus Kernel overclocked to 1.6 GHz.
charming.arpit said:
My Antutu score is 20179 with stock Sony ROM, Maximus Kernel overclocked to 1.6 GHz.
Click to expand...
Click to collapse
which tweaks,governor,io are you using?
Ashwin Prabhunerurkar said:
which tweaks,governor,io are you using?
Click to expand...
Click to collapse
I am using maximus kernel with 253 stock rom. The governor is ondemand and CPU is overclocked to 1.6 ghz
i normally have SetCPU on 1250 with performance and sioplus
BUT SetCPU keeps changing it back to 800 and i have to keep
changing it back 1250
im using this ROM; http://forum.xda-developers.com/showthread.php?t=2555021
i HAVE NOT changed the kernel using the one supplied with the ROM
ROOTED phone obviously
SetCPU changing freqenzies is becoming annoying as i play alot of games and when it changes it lags my games
any idea's on how to fix it? :fingers-crossed:
milky1223 said:
i normally have SetCPU on 1250 with performance and sioplus
BUT SetCPU keeps changing it back to 800 and i have to keep
changing it back 1250
im using this ROM; http://forum.xda-developers.com/showthread.php?t=2555021
i HAVE NOT changed the kernel using the one supplied with the ROM
ROOTED phone obviously
SetCPU changing freqenzies is becoming annoying as i play alot of games and when it changes it lags my games
any idea's on how to fix it? :fingers-crossed:
Click to expand...
Click to collapse
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
LS.xD said:
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
Click to expand...
Click to collapse
can you give me a link? and is the same cm11 or different?
milky1223 said:
can you give me a link? and is the same cm11 or different?
Click to expand...
Click to collapse
optimized by ace2nutzer --> THREAD --> rom and kernel can be found on the FTP server
LS.xD said:
optimized by ace2nutzer --> THREAD --> rom and kernel can be found on the FTP server
Click to expand...
Click to collapse
where do i actually download it witch files got confused about this earlier, when i was looking at it couldnt find the right file to download for both
milky1223 said:
where do i actually download it witch files got confused about this earlier, when i was looking at it couldnt find the right file to download for both
Click to expand...
Click to collapse
is your phone 8160 or 8160P (P variant has NFC) ?
LS.xD said:
is your phone 8160 or 8160P (P variant has NFC) ?
Click to expand...
Click to collapse
8160 version never nknew there was P a version whats the difference?
milky1223 said:
8160 version never nknew there was P a version whats the difference?
Click to expand...
Click to collapse
P has NFC as I said,
ROM + KERNEL
LS.xD said:
P has NFC as I said,
cheers and do i need to clear both cache's and reset all data before installing and witch order i install them?
rom + kernel 0r other way?
Click to expand...
Click to collapse
milky1223 said:
LS.xD said:
P has NFC as I said,
cheers and do i need to clear both cache's and reset all data before installing and witch order i install them?
rom + kernel 0r other way?
Click to expand...
Click to collapse
full wipe is recommended. But you can try to dirty flash it by only wipe caches before flashing. First flash the rom, then flash the kernel.
Click to expand...
Click to collapse
LS.xD said:
milky1223 said:
full wipe is recommended. But you can try to dirty flash it by only wipe caches before flashing. First flash the rom, then flash the kernel.
Click to expand...
Click to collapse
okay i'll try dirty flashing, thanks dude
Click to expand...
Click to collapse
LS.xD said:
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
Click to expand...
Click to collapse
Yeah, but GPU OC works only over scripts..(due to the new Algorithm) there is in latest kernel a user friendly init.d script (01gpu_oc) to OC the GPU ...
Just edit and reboot... or execute the changed script with SManager wit root rights.
ace2nutzer said:
Yeah, but GPU OC works only over scripts..(due to the new Algorithm) there is in latest kernel a user friendly init.d script (01gpu_oc) to OC the GPU ...
Just edit and reboot... or execute the changed script with SManager wit root rights.
Click to expand...
Click to collapse
@ace2nutzer any idea my bbm app keeps crashing and my phone keeps rebooting, not running GPU OC, its normal have SetCPU deleted, running at 1250mhz Cpu and i cant figure out why this is happening any idea's?
milky1223 said:
@ace2nutzer any idea my bbm app keeps crashing and my phone keeps rebooting, not running GPU OC, its normal have SetCPU deleted, running at 1250mhz Cpu and i cant figure out why this is happening any idea's?
Click to expand...
Click to collapse
Try 1200 mhz.. 1250 is very high.. And wipe cache and dalvik cache in cwm. That should fix reboots
ace2nutzer said:
Try 1200 mhz.. 1250 is very high.. And wipe cache and dalvik cache in cwm. That should fix reboots
Click to expand...
Click to collapse
1250, is the highest it goes stock it goes higher but if i select a higher one it just get stuck in boot loop and will try 1200mhz for a while, should i have it 800mhz lowest - 1200mhz highest
or
1200mhz low & high?
milky1223 said:
1250, is the highest it goes stock it goes higher but if i select a higher one it just get stuck in boot loop and will try 1200mhz for a while, should i have it 800mhz lowest - 1200mhz highest
or
1200mhz low & high?
Click to expand...
Click to collapse
Wich kernel have u actually flashed?
Try latest kernel from today with 400/1200
ace2nutzer said:
Wich kernel have u actually flashed?
Try latest kernel from today with 400/1200
Click to expand...
Click to collapse
i am just falshing the new kernel right this second, and idea about the app crashes? & could i use the ART runtime with your ROM & KERNEL
milky1223 said:
i am just falshing the new kernel right this second, and idea about the app crashes? & could i use the ART runtime with your ROM & KERNEL
Click to expand...
Click to collapse
Okay... Read post #14 again.. That should also fix FC apps
ace2nutzer said:
Okay... Read post #14 again.. That should also fix FC apps
Click to expand...
Click to collapse
i have tried that a few times they still crash, and is ART able to be run with your ROM & KERNEL?
Then try 1150mhz, and then 1100mhz.. If that didn't help, try clean install .......> wipe data and format sdcard0 and 1 as vfat