[Q] Restarting Issues plz help - Samsung Captivate Glide

hi guys i have a captivate glide with some startup problem and restart,
By placing the battery, it starts without pressing the power button.
sometime in the beginning, enters a cycle and does not pass the logo of Sansung.
if I enter CWM or Download mode also restarts.
When he can enter the AT & T logo has sometimes restarts.
If he can fully charge, has sometimes restarts.
if so far so good, I use it for about 20/30 seconds, but if the screen lock comes on (black screen), pressing the power button to bring the screen back, last 4 seconds restarts.
sometimes try to use another method to bring the screen back,
pressed volume does not work.
to make the sliding keyboard, at this time I get 3 to 4 seconds of screen, then turns green with black stripes and restarts.
the battery is new. and the system is factory 4.0.4

Related

[Q] Someone help me please!!!!

Ok so I had installed a home replacement called qq launcher version 1.21 and uninstalled around 10 min after. While it was uninstalling, the loading bar kept going and the phone froze up. So i took out my battery and proceeded to turn it on again. Now when my phone turns on, after booting up it goes to my pattern lock screen with a completely black wallpaper and my phone freezes. When I press the power button, the screen goes black and stays like that. The only time it switches is when i plug in my charger and when i do that, it goes back to to the same lock screen and stays frozen unless i press the power button (which turns my screen black again.) Im running gingerbread 2.3.4 and im not rooted. My phones also disconnected so i only use it on wifi. I would really REALLY appreciate it if someone can help me get my G2 back to normal, i depend on it greatly whenever im on a wifi network.
With the phone off, hold volume down, press and release power. This should pull up the bootloader screen. You should have the option to do a factory reset from here. Try it.

[Q] NO WAY! This is not possible?

I was talking on the phone and BOOM it resets.
It started reloading and can't! WTF!? It just gets caught. The Samsung logo comes up and then the darkside boot animation (been running this rom for a few weeks). Then it blacks out and does these intermittent vibrations like it's trying to boot but just stays black.
When I take out the battery and put it back in, it attempts to load itself without me touching any buttons. After the boot animation it goes black and does a single vibration that pulses every other second.
I've changed the battery several times, plugged in, unplugged, everything I try can't stop this.
I attempted to get it into recovery. After I get it there, it resets within seconds and puts me back to the same place. There is no way to get into download mode as it goes into this weird loop as soon as I plug the phone into USB.
Ever heard of this? What do I do?
Your explanation sounds like a hardware issue. your power button is being pressed and held without you doing it.
1- is the phone in a case? take the case off.
2 - if no case, did you get the phone wet? somehow the power button connection is being activated.
3 - power button is stuck.
Possible solution - remove battery then press and release the power button several times.
Let me know if that solved the issue.
Sent from my SGH-T989 using xda premium

stuck in blank screen vibrating bootloop, stock, t989d

Hi i have a telus T989D, stock unrooted. I was trying to open a picture in my gallery and my phone restarted, then it showed the samsung loading screen and at about 75% it restarted again. Then it just vibrated, paused, vibrated, paused, etc. and its a blank screen. I tried holding volume down + power and it takes me into download mode warning screen, but it shuts itself off before i can do anything and continues this blank screen vibrating loop. ive tried pulling the battery, but the second i put it back in it loads the samsung screen, restarts and continues the loop. if i cant even get it to stay in download mode is it even possible to fix this?
sounds to me like you have a sticky power button (very common) on these phones/samsung !!! so if wiggling a took pick in there and un jamming it a bit then you need to send it in try leaving your battery out for like 10 min take out sim cards memory everything leave it sitting ..... then try again
There are some fixes for the sticky power button here:
http://forum.xda-developers.com/showthread.php?t=1931310
Read the whole thread and then try some of the easier fixes first.
try getting into recovery mode and wipe data/factory reset
you guys were right about the power button. opened it up and pried a bit then it worked again

Weird problem with screen/power button

Background -
I bought this OnePlus 5T with a smashed screen to fix.
Paid 70 bucks for it plus the screen is just shy of 150 in total.
I was able to replace the screen and frame which was a little more complicated than I anticipated, but it ended well and the phone seems fine, although the screen quality isn't as good as stock.
***Problem - it seems that for unknown reasons, after turning off the screen pressing using the power button, screen becomes black and won't turn on, not until i hold the power button for ten seconds and restart the phone the hard way. Then the phone turns on and starts working again, but if I turn the phone off with the power button then it won't turn on again. I can tell the phone is working behind the black screen, vibration working, notification light working. But Everytime I turn the phone off with the power button I have to hard reboot the phone to get it back on again. Once this starts happening I have to factory reset to get the power button functioning normally again. It will work normally for a day or two and then out of no where the issue comes back again after pressing the power button - screen won't turn on.
Could it be software? I know it might be natural to suspect the screen is faulty, but the screen works normally until I use the power button to turn it off, and then works normally again for a couple of days after a factory reset ...
Thoughts ?

Razer phone blank screen (no boot logo) and only vibrates once when boot up then turn off - help!

So this morning my Razer Phone was all fine until it suddenly vibrates twice then the screen goes blank while in my pocket. I once thought it was just ran out of battery so i left it charging for a moment. When i tried to turn it back on, the phone only vibrates once and the screen turns on but appears blank. Even the razer boot logo doesn't shows up. After few seconds the phone comes back turned off.
The charging port is fine so are the charging cable and the adapter. Power button, fingerprint, volume button are all working normally. I also can feel a little heat on the phone while charging just like usual. I think the hardware seems to be just fine. I've tried to get into the recovery mode by holding down power and volume up button for 7-15 seconds but didn't work. It only brings it into the 'blank screen' again like when i'm trying to boot it up before.
I don't know how could this happened all of sudden, i never did anything fancy to it apart from playing games, using apps and such.
Any help would be appreciated.
There maybe two reasons there is a bug with you droid or apps & services running tho or an app or a mod you installed corrupted your systen
did it reboot in recovery or fastboot
u can try to boot to bootloader on PC , turn off your phone then plug in PC by cable, hold volume down + power button to boot to bootloader .

Categories

Resources