ROOTED USERS ONLY
I am not responsible for bricked devices.
TWRP: Download the img for your device HERE
via @ WACOMalt
Download Flashify from Google Play HERE
Under the FLASH tab using the Flashify app click Recovery Image.
Find the img file you just downloaded for your specific device.
Click on the img file then you will be prompted with a Flash Recovery? screen.
Click YUP if you would like to continue with the flash or MAYBE NOT... if you chose the wrong file or have changed your mind.
If you chose to continue flashing you will see a working box which says Flashing...
A box which says Flash Completed will show after flash is complete.
Click Reboot Now.
Done!
Formatting Cache delay fix
Tick Use rm -rf instead of formatting in the settings menu of TWRP.
Tested on T-Mobile D801 using img 2.6.3.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
did that after i installed using freegee and what do you know a bootloop. restored stock image then reflashed and worked fine.
another problem ive encountered is that once you use flashify to install recovery it does not boot into recovery at all. it boots into a black screen.
freegee boots into recovery also but you cant change versions of twrp. its at 2.6.3.0 and you cant install the 2.6.3.3 zip. tried numerous times and it fails.
I've not had that issue on T-Mobile D801.
podagee said:
another problem ive encountered is that once you use flashify to install recovery it does not boot into recovery at all. it boots into a black screen.
freegee boots into recovery also but you cant change versions of twrp. its at 2.6.3.0 and you cant install the 2.6.3.3 zip. tried numerous times and it fails.
Click to expand...
Click to collapse
THIS METHOD DOES NOT WORK!!
you will have a black screen and no recovery DO NOT ATTEMPT>
AT&T users dont do it.
podagee said:
THIS METHOD DOES NOT WORK!!
you will have a black screen and no recovery DO NOT ATTEMPT>
AT&T users dont do it.
Click to expand...
Click to collapse
I tried this method before seeing this tread. I tried to flash clean ROM when going to boot up, black screen good thing backup worked threw twrp everthing I try threw twrp backup or wipes cashes and that works just fine is there a fix for att users. Thanks
Sent from my LG-D800 using xda app-developers app
podagee said:
THIS METHOD DOES NOT WORK!!
you will have a black screen and no recovery DO NOT ATTEMPT>
AT&T users dont do it.
Click to expand...
Click to collapse
Really not needed, to post in this manner. Just because it did not work for you does not mean it will not for others...
And actually I am a AT&T User LG-D800 and it work just fine for my device, did you have the correct img file.
podagee said:
another problem ive encountered is that once you use flashify to install recovery it does not boot into recovery at all. it boots into a black screen.
freegee boots into recovery also but you cant change versions of twrp. its at 2.6.3.0 and you cant install the 2.6.3.3 zip. tried numerous times and it fails.
Click to expand...
Click to collapse
As stated it work for me, I utilized the app and installed recovery TWRP and I booted into it and updated the TWRP with the zip.
Keep in mind there has been issues with using the app, BUT there is warnings as with all tweaking/rooting/flashing......
I flashed TWRP using Flashify as well. Done on the D802 as per the instruction. Recovery works fine.
Judge Joseph Dredd said:
Really not needed, to post in this manner. Just because it did not work for you does not mean it will not for others...
And actually I am a AT&T User LG-D800 and it work just fine for my device, did you have the correct img file.
As stated it work for me, I utilized the app and installed recovery TWRP and I booted into it and updated the TWRP with the zip.
Keep in mind there has been issues with using the app, BUT there is warnings as with all tweaking/rooting/flashing......
Click to expand...
Click to collapse
the images i used were provided from here/ the link. ive tried numerous times and nothing. please share the image you used, were you on D80010o?
---------- Post added at 08:06 AM ---------- Previous post was at 07:28 AM ----------
it seems the loki aboot from the link posted for recovery images is not compatible with th D80010o. if a fix were provided there would be no problems flashing.
yup i can confirm that using flashify after the ota and root does not work on the att d800. if you have successfully done it JudgeJosephDredd please give any directions that would help. cause no matter what image i flash it does not work......at all. thanks in advance if you decide to help.
This app ****ing rocks. Thank you for introducing me to flashify. I used it to upgrade cwm and cm11 in under 5 steps. That's pretty impressive to me.
Guys is there a difference between using this and using Freegee from the Playstore which ive already done. If this way is better how do i undo the Freegee, do i just uninstall it as TWRP already exists on my phone.
mcteague said:
Guys is there a difference between using this and using Freegee from the Playstore which ive already done. If this way is better how do i undo the Freegee, do i just uninstall it as TWRP already exists on my phone.
Click to expand...
Click to collapse
You don't need to worry. They are different ways of arriving at the same destination.
Just uninstall Freegee.
Worked for me. T-Mobile G2.
Sent from my LG-D801 using Tapatalk
Works fine on D802
Sent from my LG-D802 using Tapatalk
k3xx said:
Works fine on D802
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
What did you use? the 2.6.3.3 D802 img at the link provided?
Yep I'm used that link (to be clear: http://techerrata.com/browse/twrp2/g2d802) but first I installed the 2.6.3.2 .img file cause flashify supports better img files for recovery than zip and then used that TWRP to flash the 2.6.3.3 .zip file.
Sent from my LG-D802 using Tapatalk
Every time I try Flashify on either of the two img files for Verizon, it just reboots to a black screen. After first black screen I do the hard reset with the power button but still no luck.
Guys I'm thinking of flashing recovery via flashify, I did have recovery gained via freegee but got stuck in a boot loop while flashing Omni ROM and couldn't enter recovery so had to restore full software via LG Launcher software. My question is are there any safe roms out there for us yet, or was it a problem with freegee recovery
Sent from my LG-D802 using Tapatalk
mcteague said:
Guys I'm thinking of flashing recovery via flashify, I did have recovery gained via freegee but got stuck in a boot loop while flashing Omni ROM and couldn't enter recovery so had to restore full software via LG Launcher software. My question is are there any safe roms out there for us yet, or was it a problem with freegee recovery
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I don't its freegee did you check md5 before you flashed the ROM
Sent from my Nexus 4 using XDA Premium 4 mobile app
Related
6/02/13This update has been provided by Ichigo™
TWRP has just been updated to 2.4.4.0, here is a new smirkit v.2.8 that contains this latest TWRP release.
Click to expand...
Click to collapse
everyone who uses this should thank Ichigo when you see his post's. he has taken on the task to keep this updated for your use as me nor webdroidmt no longer have this device. Thanks Ichigo!
download the new smirkit app here
https://dl.dropboxusercontent.com/s/q0wa5y0mgrgr433/Smirkit.apk
install the app, click install! no need to reboot to recovery and flash like before.
use smirkit as you normally would. this would be a new installer of smirkit
some info to take note of.
The advantages of an app over a flashable zip are:
1)You can install smirkit within the app instead of having to reboot into recovery
2)It will install smirkit on alt roms
3)It can automatically remove smirkit if the user wants instead having to manually do it.
Two things the users should know:
1) They may get a warning when installing something via smirkit. I'm not sure why it shows, but they can just ignore the warning. Everything still works fine.
2)They may find a smirkit folder on their sdcard. They shouldn't delete this folder. It's only 30bytes.
______________________________
smirkit now works on all roms! stock rooted users, make sure you install busybox from the market and run the app to install busybox first.
this update includes sblood86's new cannibal open touch recovery. read below for new install instructions!
release thread here
thread cleaned. I wanted to lighten the load and provide a way of flashing up-to-date files so nobody gets left behind. as cwm gets updated, I will update this to include it. in this update is the new twrp 2.1.1. I never got a response from him officially, but u guys need a way so I'm leaving it up until he says otherwise. I do beg u to visit his site anyway if u use this so he gets his views/clicks. if you can spare some change donate to them.
http://teamw.in/project/twrp2
I wanna thank kinfauns for rewriting the way the scripts now run, to verify the md5 before flashing the Bootloader or Recovery. this guy does a lot behind the scenes, so thank this man often! without his help that twrp update wouldn't have came so soon. if u have time, I highly suggest reading his guide to familiarize yourself with the kindle fire. http://forum.xda-developers.com/showthread.php?p=23747567
credits to:
hashcode - updating fff to v1.4a with a boot mode selection.. awesome!
dees_troy - updating twrp and squashing an old issue that I'm so glad is fixed!
sblood86 - providing support on our kindles and helping me very regularly lol.
jrummy - developers of root browser
doomlord and team utterchaos - for providing us with support and updates to our cwmtouch!
pokey9000 - for creating the bootloader on all of our devices!
Kinfaun - for assisting me with writing the scripts and method.
teamwin - for starting us off with twrp
webdroidmt - staying involved and updating smirkit since i no longer have this device!
Ichigo - taking on the task of updating smirkit since me and webdroidmt no longer have this device! (thank this man when you can)
you NEED root, busybox, and a custom recovery to do this. (any recovery u can flash a zip with)
______________________install instructions___________________________
[*]firstly, grab terminal emulator and busybox if you don't already have it off the market.
[*]now, download goomanager from the market
[*]in goomanager, tap browse all files, then devs/smirkis/otter/smirkit and download smirkit-installer
-needs to be updated. use dropbox link for now
OR
[*]download smirkit-installer directly here (thank Ichigot for this update):
http://db.tt/8ZLuCqmE
[*]flash smirkit-installer.zip in recovery using goomanager, or manually
______________________how to use smirkit____________________________
[*]boot back into the OS and open terminal emulator.
[*]first, type SU then hit enter
[*]now, type smirkit then hit enter
it should end up like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then this:
from here, make a selection from the menu.
enjoy!
[*]WARNING: IF YOU FLASH A NEW ROM IT WILL REMOVE THE FILES NECESSARY FOR THIS TO WORK. JUST REFLASH THIS IN RECOVERY AGAIN OR ASK YOUR ROM DEVELOPER TO SUPPORT THE NEW SMIRKIT IN THEIR ROM!
[*]
nice stuff. btw can we install recovery without installing firefirefire bootloader first?.
dieandromeda said:
nice stuff. btw can we install recovery without installing firefirefire bootloader first?.
Click to expand...
Click to collapse
of course, but u will need firefirefire to get into recovery. but the order you do it in doesn't really matter
Sent from my HTC Glacier using xda premium
smirkis said:
of course, but u will need firefirefire to get into recovery. but the order you do it in doesn't really matter
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
my kindle already have firefirefire and twrp, planning to test clockwork with stock bootloader expecting it will work without using fff. i guess i still need fff to boot into clockwork recovery, am i right?.
dieandromeda said:
my kindle already have firefirefire and twrp, planning to test clockwork with stock bootloader expecting it will work without using fff. i guess i still need fff to boot into clockwork recovery, am i right?.
Click to expand...
Click to collapse
Or you can use a terminal emulator and type:
Su
Oem idme bootmode 5000
Sent from my myTouch_4G_Slide using XDA App
jmcoffey said:
Or you can use a terminal emulator and type:
Su
Oem idme bootmode 5000
Sent from my myTouch_4G_Slide using XDA App
Click to expand...
Click to collapse
only do that, if you have clockworkmod
Sent from my HTC Glacier using xda premium
i heard we can boot into clockwork recovery via rom manager, what i want is the booting using power button in case something happened that i can't boot normally
dieandromeda said:
i heard we can boot into clockwork recovery via rom manager, what i want is the booting using power button in case something happened that i can't boot normally
Click to expand...
Click to collapse
u can use rom manager to do backups n restores n installs, but reboot to recovery option does not work in rom manager.
so install cwm, and firefirefire bootloader
Sent from my HTC Glacier using xda premium
smirkis said:
u can use rom manager to do backups n restores n installs, but reboot to recovery option does not work in rom manager.
so install cwm, and firefirefire bootloader
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
ic. thanks..
If using CM7 with TWRP installed, can this be used to just simply swich from TWRP to CWM. I'm sure there are many looking for this?
chairshot215 said:
If using CM7 with TWRP installed, can this be used to just simply swich from TWRP to CWM. I'm sure there are many looking for this?
Click to expand...
Click to collapse
yes sir! that was one of my motives! you can do all of this on your kindle fire, from any os.
Sent from my HTC Glacier using xda premium
is it possible to add a script for installing a kernel?.
After installing cwm can't boot into twrp where my previous backups are done. Can you have both methods or have to reinstall twrp with gscript?
fredspierson said:
After installing cwm can't boot into twrp where my previous backups are done. Can you have both methods or have to reinstall twrp with gscript?
Click to expand...
Click to collapse
You have to reinstall.
Sent from my myTouch_4G_Slide using XDA App
dieandromeda said:
is it possible to add a script for installing a kernel?.
Click to expand...
Click to collapse
you can, but some kernels use different wifi drivers too, so its easier right now to flash kernels thru recovery. which kernel are you referring to?
Sent from my Amazon Kindle Fire using xda premium
smirkis said:
you can, but some kernels use different wifi drivers too, so its easier right now to flash kernels thru recovery. which kernel are you referring to?
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
i'm referring to stock kernel and intersectRaven... i'm not good in adb, thats why i always prefer script just like your gscript or flashing through recovery... can u point me to the right direction how to flash kernel using recovery... i guess i need to compile in zip file with script/signed/etc...
For quite a while IntersectRaven's kernels have been properly zipped for easy installation via TWRP or CWM. Just copy the .zip to your Kindle,and install via your recovery. His zip will automatically update the wifi driver, as well.
However, as a word of warning... PLEASE do a recovery-based backup of your system prior to installing any new kernel. If you don't like the new kernel's performance, you can reinstall the original kernel by restoring the /boot partition from the backup you made before installing the new kernel. Also since IntersectRaven's .zip will replace your original wifi driver, make a BACKUP of your original wifi driver in case you ever want to go back to your original kernel. To do this, use something like root explorer to copy /etc/wifi/tiwlan_drv.ko to /etc/wifi/tiwlan_drv.ko.orig. Then you can copy it back if you reinstall the original kernel.
By the way, IntersectRaven's kernel will only overclock newer CPUs that are internallly flagged as factory authorized to run at 1.2 Ghz. You will still see a performance improvement with his kernel compared to stock even at 1 Ghz. Neall
^thanks for the clarification. btw can we use this apps to install supercharger?. there are .sh files included in supercharger pack. is there any precaution that i need to worry?
this is awesome! thank you so much
Sorry, little late on the follow up question but just to be sure, if I have TWRP installed and looking to make the change to CWM I basically then would just install the APK, run the App and then just select the option to install CWM and call it a day????????
TWRP recovery 3.0 zenwatch
How to install Use this giude to unlock bootloader and boot fastboot/recovery
http://forum.xda-developers.com/zenwatch/general/guide-how-to-access-recovery-zenwatch-t3167623
Warning ! Unlock bootloader wipe your data!
update
Twrp 3.0.2 For android wear 1.4
NOT INSTALL ON ANDROID WEAR 1.3 !
Download twrp 3.0.2
installation
Code:
fastboot flash recovery twrp-3.0.2_anthias.img
Photos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Recovery for Android Wear 1.4
installation stock recovery
Download stock recovery
Code:
fastboot flash recovery recovery_MEC23S.img
OLD VERSION FOR ANDROID WEAR 1.5 / TWRP 3.0 /TWRP 3.0.1
Download twrp 3.0.1-0 Zenwtach AW 1.4
Download twrp 3.0
OLD VERSION FOR ANDROID WEAR 1.3 / TWRP 2.8.7.0
old version (for android wear 1.3) download twrp mega.nz
Reboot into bootloader and flash recovery
Code:
fastboot flash recovery twrp_2.8.7.0_anthias.img
source https://github.com/asyan4ik/asus_anthias/tree/master
acbka said:
Twrp recovery 2.8.7.0 zenwatch
How to install
Use this giude to unlock bootloader and boot fastboot/recovery
http://forum.xda-developers.com/zenwatch/general/guide-how-to-access-recovery-zenwatch-t3167623
Warning ! Unlock bootloader wipe your data!
download twrp basketbuild.com
Reboot into bootloader and flash recovery
Code:
fastboot flash recovery twrp_2.8.7.0_anthias.img
Click to expand...
Click to collapse
I am not able to download the file. Getting a 404 error off the page. Any chance you could upload it to another service?
Thanks in advance!
btonetbone said:
I am not able to download the file. Getting a 404 error off the page. Any chance you could upload it to another service?
Thanks in advance!
Click to expand...
Click to collapse
Same. Thanks.
Ups , i fix this today ...
Sorry
hecksagon said:
Same. Thanks.
Click to expand...
Click to collapse
reload to mega . sorry
Fantastic! Flashed it and used it to flash a Wear version of SuperSU. Watch is rooted, without having to use KingRoot!
Let's see, somebody posted a system image a while back, didn't they? I guess I could flash that to unroot if there's a firmware update.
CSX321 said:
Fantastic! Flashed it and used it to flash a Wear version of SuperSU. Watch is rooted, without having to use KingRoot!
Let's see, somebody posted a system image a while back, didn't they? I guess I could flash that to unroot if there's a firmware update.
Click to expand...
Click to collapse
Yes, I pulled a system image and another user modified to successfully pass the checks that occur during updates (the original pull didn't pass). Check out this thread: http://forum.xda-developers.com/zenwatch/development/root-t3163248
Makes sure you read up on it, though, as it sounds like you'd need to do some legwork to get the system image to work. Relevant posts in that thread are 32, 52, and 54.
Hopefully, though, having TWRP means that someone smarter-than-I-am may develop even more elegant solutions!
Cheers!
Now that we have twrp we can do a system pull from an unrooted device. The system image posted in the other thread will only work on the previous version of Android Wear. Do not flash if you are up to date.
Flashing the system.img for the ZenWatch on LCA43 does work but I wouldn't recommend it (I had to recently wipe my watch to test something), as long as you do an update path from flashing to directly flashing the OTA zip, but it's long winded (of course now that we have TWRP, updates and flashing back to "stock" will be so much easier). That, and KingRoot seems to leave a lot of trace files.
Also as a sidenote, because of SuperSu, I was able to install Stericson's BusyBox from the app (sideloaded apk). KingRoot's root authorization window didn't play well with Android Wear.
itechnoguy said:
Flashing the system.img for the ZenWatch on LCA43 does work but I wouldn't recommend it (I had to recently wipe my watch to test something), as long as you do an update path from flashing to directly flashing the OTA zip, but it's long winded (of course now that we have TWRP, updates and flashing back to "stock" will be so much easier). That, and KingRoot seems to leave a lot of trace files.
Also as a sidenote, because of SuperSu, I was able to install Stericson's BusyBox from the app (sideloaded apk). KingRoot's root authorization window didn't play well with Android Wear.
Click to expand...
Click to collapse
The current system image in the other thread still has Kingroot on it. After removing that I tried to flash SuperSU but that force closes. Would like to get somebody who has not rooted to do a twrp backup and post it. We should be able to make a new flashable clean system image from that.
hecksagon said:
The current system image in the other thread still has Kingroot on it. After removing that I tried to flash SuperSU but that force closes. Would like to get somebody who has not rooted to do a twrp backup and post it. We should be able to make a new flashable clean system image from that.
Click to expand...
Click to collapse
Make sure you're using this zip file to install SuperSU (it seems to be the same binary as Chainfire's) since the app itself doesn't work, and this one doesn't require authorizations (not completely safe, but it works).
(also, don't forget to unroot from the KingRoot app first; the unroot seems to be clean enough to use Wear SuperSU)
itechnoguy said:
Make sure you're using this zip file to install SuperSU
Click to expand...
Click to collapse
That's the one I used, and it works. (Though there's no authorization popups, as you said.)
Theres an app called Super SUMe, in the Play Store that'll switch out KingRoot for SuperSU. Super easy to do, one click to complete the process. Have no idea if it'll work on watches, but I guess it doesnt hurt to try? Make sure you make backup first, now that TWRP is available..
Hoping to get this watch today! or maybe the Moto360..
Talysdaddy said:
Theres an app called Super SUMe, in the Play Store that'll switch out KingRoot for SuperSU. Super easy to do, one click to complete the process. Have no idea if it'll work on watches, but I guess it doesnt hurt to try? Make sure you make backup first, now that TWRP is available..
Hoping to get this watch today! or maybe the Moto360..
Click to expand...
Click to collapse
It'll probably remove KingRoot successfully, but the Zenwatch can't launch the SuperSU app, so root authorization dialogs never show up (the su binary still gets installed, but it can't do anything without permission from the app first).
Boooooo moto 360. It's sooo damn big.
@acbka How did you set up your build environment? I wasn't exactly sure what to initially use (other than not using the CyanogenMod sources since it doesn't work well with building TWRP; I'm assuming Omni 5?).
itechnoguy said:
@acbka How did you set up your build environment? I wasn't exactly sure what to initially use (other than not using the CyanogenMod sources since it doesn't work well with building TWRP; I'm assuming Omni 5?).
Click to expand...
Click to collapse
hi . i update first message .
add my github
Message for all you zenwatch 2 people.. Don't try to flash this recovery. You will have a soft brick. And with no resources at this time. There is no fix.
Sent from my ASUS_Z00A using Xparent BlueTapatalk 2
Has anyone pulled the stock system partition? I, stupidly, didn't do it before I installed SuperSU. I'd like to be able to go back to stock, if there's another firmware update.
I need a link to the stock recovery.IMG file
Welcome To Negalite HW TWRP Recovery!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
lz4 Compression Algorithm - boot speed
f2fs Support
logging enabled(logcat)
fb2png - take screenshots within recovery
compiled using Uber Toolchains
compiled using Negalite HW kernel
many features enabled
Custom Theme
Downloads
Recovery Flashable! Flash From Within Your Current Custom Recovery
negalite-HW-TWRP-3.0.3-v1.5.zip - 1/09/17
Fastboot Flashable! Flash From Within Bootloader Using Fastboot
negalite-HW-TWRP-3.0.3-v1.5.img - 1/09/17
Device Source
https://github.com/Negamann303/omni_twrp_device
Reserved...
Nice. Thanks for your work man! I'll try this out and report back if I notice any issues. If you don't hear from me then it's all good!
Is f2fs only for cache, data, and internal storage? Or can it be used on system as well?
[update] I used the flash method and it's running good. Switched cache, data, and internal storage to f2fs and all is running well.
imucarmen said:
Nice. Thanks for your work man! I'll try this out and report back if I notice any issues. If you don't hear from me then it's all good!
Is f2fs only for cache, data, and internal storage? Or can it be used on system as well?
[update] I used the flash method and it's running good. Switched cache, data, and internal storage to f2fs and all is running well.
Click to expand...
Click to collapse
Good I set it up for system to do it as well, even though technically it would be pointless since system doesn't write files(unless you manually add to it or flash something to it) . I haven't tested it though
Sent from my SM-G935P using Tapatalk
Updated Recovery To The Latest 3.0.2-1!
I guess the restore bug may not be present in this watch's system due to no efs partition. I'm wondering if it does affect it at all since it does affect quite a few devices.
shag_on_e said:
I guess the restore bug may not be present in this watch's system due to no efs partition. I'm wondering if it does affect it at all since it does affect quite a few devices.
Click to expand...
Click to collapse
We are one commit past that issue, it was already fixed
Sent from my SM-G935P using Tapatalk
i get a red exclamation when i flash this recovery and then try to reboot into recovery. i am not sure what i am doing wrong. I flashed 2-3 times now with the same result. here is the command i am using
adb reboot bootloader
fastboot flash recovery negalite-HW-TWRP-3.0.2-v1.4.img
fastboot reboot
samjoandco said:
i get a red exclamation when i flash this recovery and then try to reboot into recovery. i am not sure what i am doing wrong. I flashed 2-3 times now with the same result. here is the command i am using
adb reboot bootloader
fastboot flash recovery negalite-HW-TWRP-3.0.2-v1.4.img
fastboot reboot
Click to expand...
Click to collapse
After you flash the recovery, boot to the normal watch running before you boot back to recovery, i *think* that is how I solved it, but it has been some time ago.
Pkt_Lnt said:
After you flash the recovery, boot to the normal watch running before you boot back to recovery, i *think* that is how I solved it, but it has been some time ago.
Click to expand...
Click to collapse
i tried this multiple times without success
samjoandco said:
i tried this multiple times without success
Click to expand...
Click to collapse
I had to do it about 8 times with the same problem.
Try flashing recovery then back to bootloader with
Code:
fastboot reboot-bootloader
Then manually reboot from the bootloader to recovery.
Sorry, I just don't remember how I solved it
while in bootloader mode, is fastboot boot negalite-HW-TWRP-3.0.2-v1.4.img working?
samjoandco said:
i get a red exclamation when i flash this recovery and then try to reboot into recovery. i am not sure what i am doing wrong. I flashed 2-3 times now with the same result. here is the command i am using
adb reboot bootloader
fastboot flash recovery negalite-HW-TWRP-3.0.2-v1.4.img
fastboot reboot
Click to expand...
Click to collapse
Your bootloader is unlocked?
gwolfu said:
while in bootloader mode, is fastboot boot negalite-HW-TWRP-3.0.2-v1.4.img working?
Click to expand...
Click to collapse
Success Finally
this command worked. i didnt even have to reboot; in am in TEAMWIN blue screen and everything works now
Thanks for helping me .
---------- Post added at 06:45 PM ---------- Previous post was at 06:31 PM ----------
samjoandco said:
Success Finally
this command worked. i didnt even have to reboot; in am in TEAMWIN blue screen and everything works now
Thanks for helping me .
Click to expand...
Click to collapse
back to the same red exclaimation mark after rebooting! and boot to recovery.
my bootloader is unlocked
samjoandco said:
Success Finally
this command worked. i didnt even have to reboot; in am in TEAMWIN blue screen and everything works now
Thanks for helping me .
---------- Post added at 06:45 PM ---------- Previous post was at 06:31 PM ----------
back to the same red exclaimation mark after rebooting! and boot to recovery.
my bootloader is unlocked
Click to expand...
Click to collapse
Fastboot boot temporarily loads the recovery.img. Try doing that then flashing the recovery zip within recovery. Quick workaround for you
Sent from my SM-G935P using Tapatalk
samjoandco said:
Success Finally
this command worked. i didnt even have to reboot; in am in TEAMWIN blue screen and everything works now
Thanks for helping me .
---------- Post added at 06:45 PM ---------- Previous post was at 06:31 PM ----------
back to the same red exclaimation mark after rebooting! and boot to recovery.
my bootloader is unlocked
Click to expand...
Click to collapse
download the recovery img boot in to bootloader fastboot flash recovery img.whit the hardver button navigate to reboot recovery tourn long and you will booted in twrp recovery
negamann303 said:
Fastboot boot temporarily loads the recovery.img. Try doing that then flashing the recovery zip within recovery. Quick workaround for you
Sent from my SM-G935P using Tapatalk
Click to expand...
Click to collapse
thanks this worked!
after trying for almost 24 hours, this worked fine. now i can go into recovery from ADB as well as from the reboot prompts within the watch. this is solved for good
negamann303 said:
Fastboot boot temporarily loads the recovery.img. Try doing that then flashing the recovery zip within recovery. Quick workaround for you
Sent from my SM-G935P using Tapatalk
Click to expand...
Click to collapse
yeas was about to suggest just that
well my idea was to boot in TWRP temporary to validate that the recovery image works and then flash it again from recovery
but heck negamann303 was faster then me on this
glad you made it work
Hey guys
Just got mine YEEEES
Is it possible to dualboot 1.5 & 2.0 via multiROM, dual-boot-scripts or magisk?
Thank you soo much
Cheers
Blade
Also, can I take backups of the current state, to revert to it later?
BIade said:
Hey guys
Just got mine YEEEES
Is it possible to dualboot 1.5 & 2.0 via multiROM, dual-boot-scripts or magisk?
Thank you soo much
Cheers
Blade
Also, can I take backups of the current state, to revert to it later?
Click to expand...
Click to collapse
No multirom for us yet. But you can do backup and restore!
BTW, luv Koln my last visit
This is the LeEco Le Pro 3's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
I didn't try it yet
But Thank you for your work,
mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
It is compatible for the lepro3? I used it before for oneplus2.
meuhmeuh51 said:
It is compatible for the lepro3? I used it before for oneplus2.
Click to expand...
Click to collapse
Yes, it's completely compatible, i have tested it on my leeco le pro 3
mauronofrio said:
Yes, it's completely compatible, i have tested it on my leeco le pro 3
Click to expand...
Click to collapse
ok I will try
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently
Sent from my SM-P600 using XDA-Developers Legacy app
mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently<br />
<br />
Sent from my SM-P600 using XDA-Developers Legacy app
Sent from my LEX727 using XDA-Developers Legacy app
toanau said:
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently<br />
<br />
Sent from my SM-P600 using XDA-Developers Legacy app
Sent from my LEX727 using XDA-Developers Legacy app
Click to expand...
Click to collapse
no
Think I just bricked my Le Eco Pro 3. Dragged the ROM into the root system of my X727 I was going to flash, Lineage 13
Enabled USB Debug
Unlocked Bootloader
Flashed GS Custom Recovery
Wiped Everything
Went to Flash the ROM, and nothing showed up...
I rebooted, and now I think the stock recovery re-installed itself, and there is no ROM present because I wiped everything.
Help
I just get a flicker of the Le Eco Boot Screen, then it shuts off. Can't get into ADB or Recovery.
kaivorth said:
Think I just bricked my Le Eco Pro 3. Dragged the ROM into the root system of my X727 I was going to flash, Lineage 13
Enabled USB Debug
Unlocked Bootloader
Flashed GS Custom Recovery
Wiped Everything
Went to Flash the ROM, and nothing showed up...
I rebooted, and now I think the stock recovery re-installed itself, and there is no ROM present because I wiped everything.
Help
I just get a flicker of the Le Eco Boot Screen, then it shuts off. Can't get into ADB or Recovery.
Click to expand...
Click to collapse
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
coolmaster121 said:
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Thankfully I fixed it.
Flashed an aboot file, and all a sudden, Lineage 13 started up. You cannot believe how psyched I was. I was on eBay looking at my next phone, and all angry that I messed up my perfectly good phone.
I don't think this tool had anything to do with it. I was unforunate enough to wipe my phone before I went to install the ROM, and it wiped the ROM too. When it restarted, it had nothing to boot too. Just used Fastboot to flash the aboot file, and sideloaded the ROM and flashed away
kaivorth said:
Thankfully I fixed it.
Flashed an aboot file, and all a sudden, Lineage 13 started up. You cannot believe how psyched I was. I was on eBay looking at my next phone, and all angry that I messed up my perfectly good phone.
I don't think this tool had anything to do with it. I was unforunate enough to wipe my phone before I went to install the ROM, and it wiped the ROM too. When it restarted, it had nothing to boot too. Just used Fastboot to flash the aboot file, and sideloaded the ROM and flashed away
Click to expand...
Click to collapse
Had the same issue and same fix for my attempt into unlocking bootloader and installing custom recovery and rom.
Did you also flash the 5.8.0.19 aboot file? I'm wondering if flashing a newer one is a good idea...
Sent from my LEX727 using Tapatalk
Very good tool thank you very much Mauro
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Wortelstok said:
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Click to expand...
Click to collapse
The twrp 3.1.0 is better no matter the dev
Wortelstok said:
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Click to expand...
Click to collapse
Maybe yes, in the next Tool update i will update all recovery available, for now you can flash it through Manual Mode
mauronofrio said:
Maybe yes, in the next Tool update i will update all recovery available, for now you can flash it through Manual Mode
Click to expand...
Click to collapse
Thank you for all your effort for our Le Pro 3 :good:
Does this unlock bootloader with the current us version 21s?
I try using this Tool ALL in One on the Le Pro 3 but unable to unlock the bootloader as it displayed
"FAILED <remote: oem unlock is not allowed).
I already checked "ON under the OEM UNLOCKING" and "USB debugging" is "ON" also under the Developer Option before turning off the phone and boot it (volume down + Power) into Fastboot Mode.
Please help. Any advise is appreciated.
coolmaster121 said:
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
fastboot should be vol down
Note: Do not use if you have multiple users (including a guest user)
Lots more information here: https://plus.google.com/u/1/+DeesTroy/posts/i33ygUi7tiu
I strongly recommend that kernel developers start building the touch drivers into the kernel instead of depending on modules to ensure a fully functional TWRP since recovery is now part of the boot partition.
Be careful about what you install on your device as far as kernels and ROMs go. I think there is a high potential for losing the ability to decrypt because of the OS and patch level tags that are included in the boot image and the anti-rollback features that Google has implemented.
MTP does not work in TWRP on the Pixel 2 and will not work until we have time to update the TWRP MTP implementation. You may still use adb to push and pull files.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
The zip install method installs TWRP to both slots.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your passord, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. If you are currently rooted, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, you will need to reflash root.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
3.2.1-1 has working decrypt with the February security patch!
3.2.1-2 fixes some zip install errors
3.2.3-1 supports decrypting Android 9.0 Pie even with a pin / pattern / password set
Pixel 2:
https://twrp.me/google/googlepixel2.html
https://dl.twrp.me/walleye/
Pixel 2 XL:
https://twrp.me/google/googlepixel2xl.html
https://dl.twrp.me/taimen/
Reserved!
Hey Dees Troy
sounds good, does it work with DP 8.1 bootloader?
So happy to see it.
Nice
What a joy it is to see this post today. Thank you!!
Thank you! You're a hero.
I'm dying to root my Pixel 2. Does anyone know whether this alpha release of TWRP can be used to install SuperSU (and suhide)? I'm afraid to try.
Spire42 said:
Thank you! You're a hero.
I'm dying to root my Pixel 2. Does anyone know whether this alpha release of TWRP can be used to install SuperSU (and suhide)? I'm afraid to try.
Click to expand...
Click to collapse
i tried flashing SuperSU v2.82 SR5 and phone would not boot into system. It just kept booting into bootloader.
To get my phone working again, I needed to flash the boot.img from the Pixel 2 Factory image via
Code:
fastboot flsah boot boot.img
i've gathers recovery / kernel logs - however since TWRP boots i will post them in the SuperSU forum.
Code:
fastboot boot twrp-3.1.1-alpha1-walleye.img
I've tried to boot to this alpha on my Pixel 2, and it just sits there and does nothing. I've tried two different cables. If I unplug, it fails, obviously.
Code:
fastboot devices
shows my device and I'm definitely on the bootloader screen.
Any ideas? I re-downloaded the sdk platform tools as well as the latest usb driver to see if that was the problem, but it wasn't the problem.
deepdvd said:
Code:
fastboot boot twrp-3.1.1-alpha1-walleye.img
I've tried to boot to this alpha on my Pixel 2, and it just sits there and does nothing. I've tried two different cables. If I unplug, it fails, obviously.
Code:
fastboot devices
shows my device and I'm definitely on the bootloader screen.
Any ideas? I re-downloaded the sdk platform tools as well as the latest usb driver to see if that was the problem, but it wasn't the problem.
Click to expand...
Click to collapse
Connected to PC vie USB 3 port?
Try with USB 2 if you have it. I've read people having success with it.
Natakranta said:
Connected to PC vie USB 3 port?
Try with USB 2 if you have it. I've read people having success with it.
Click to expand...
Click to collapse
I tried using a third USB port, and it worked. Thanks! I thought that testing two different ports would have been enough, but apparently the third time's the charm.
deepdvd said:
I tried using a third USB port, and it worked. Thanks! I thought that testing two different ports would have been enough, but apparently the third time's the charm.
Click to expand...
Click to collapse
Sent from my Sony Xperia Z1 using XDA Labs
marc.ientilucci said:
i tried flashing SuperSU v2.82 SR5 and phone would not boot into system. It just kept booting into bootloader.
To get my phone working again, I needed to flash the boot.img from the Pixel 2 Factory image via
Code:
fastboot flsah boot boot.img
i've gathers recovery / kernel logs - however since TWRP boots i will post them in the SuperSU forum.
Click to expand...
Click to collapse
Same issue here, tried with Snoke kernal and get the same problem
Does this mean root is getting close?
stackz07 said:
Does this mean root is getting close?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pixel-2/how-to/how-root-magisk-pixel-2-t3698713
Anyone out here that can basically decrypt in twrp? Who can see all the folders and backup like me? I can flash a zip from install? Anyone else?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 10:10 AM ---------- Previous post was at 10:09 AM ----------
Dees_Troy said:
Note, this is BROKEN. Decrypt does not work yet and because it does not work, a lot of other things like backup and restore don't work. You can't transfer files with MTP. I have no idea what will happen if you try to factory reset. Basically, a lot of stuff won't work so if you're scared or can't afford to lose data or be unable to use your device, DON'T use this. I strongly recommend that you have the factory images already downloaded and know how to reflash them if needed.
I am not providing a way to permanently flash TWRP at this time. You should use:
fastboot boot /path/to/twrp.img
This will one-time temp boot TWRP so you can do whatever like maybe adb sideload a zip or something.
I am working on decrypt. The Pixel 2 uses a new embedded secure element chip from NXP. Most of the crypto implementation is done in Java and not in native C/C++ so it's going to take a while to convert all of this code and its many layers into something that TWRP can run. Be patient. I'll get it eventually (probably).
Pixel 2:
https://twrp.me/google/googlepixel2.html
https://dl.twrp.me/walleye/
Pixel 2 XL:
https://twrp.me/google/googlepixel2xl.html
https://dl.twrp.me/taimen/
Click to expand...
Click to collapse
@despairfactor can see all the files in twrp and flash from install tab as well as me from my 2 XL?
Sent from my Nexus 6 using Tapatalk
bryantjopplin said:
Anyone out here that can basically decrypt in twrp? Who can see all the folders and backup like me? I can flash a zip from install? Anyone else?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 10:10 AM ---------- Previous post was at 10:09 AM ----------
@despairfactor can see all the files in twrp and flash from install tab as well as me from my 2 XL?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
FYI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
bryantjopplin said:
FYIView attachment 4321138View attachment 4321139View attachment 4321140
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Forgot this. Only did vendor. Will do all later.
Sent from my Nexus 6 using Tapatalk
Anyone willing to reflash magisk via twrp and pull recovery.log immediately after from twrp and upload?????
Sent from my Nexus 6 using Tapatalk
bryantjopplin said:
Anyone willing to reflash magisk via twrp and pull recovery.log immediately after from twrp and upload?????
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Can do after work.
In about 8 hours [emoji6]