[Q] Note7100 is not recognised in ODIN mode by PC - Galaxy Note II Q&A, Help & Troubleshooting

Hi guys,
upgrade my note7100 with keten v6.1 (4.3) Jb rom.As usal the wifi is not working.As per the instruction i should install the wifi fix through odin.But my device is not recognised by ODIN when it is in download mode.It is recognized by odin when the device(N7100) is power on mode.Had tried with drivers and changing usb ports.Please suggest any thing else.

Got Solution!!!
Got solution!!!!
Installed latest Kies and odin detect it.Sorry to increase the number of posts.

Related

[Q] Question re. Kies, root and custom ROM

I cannot connect to Kies, it stays in the searching mode for my phone despite it being connected via USB. My ROM is FrostyJBv6 and the phone which is the wind variant T999v, is rooted.
Does Kies only recognize phones with stock rom or is there another solution?

[Q] Odin doesn't really recognize my Note2

Hello everyone,
I just decided to root my phone and found guides for doing so (and I'm very thankful for those!).
My problem is, that Odin won't recognize my phone, if i connect it after odin is already started
However, if i have my phone in download mode, connect it to my computer and THEN open odin it's recognized just fine.
Any ideas what could cause the problem? And is it even a problem or can i just proceed?
Its the same if i try to connect when not in download mode, odin will only recognize my phone, if i have it connected before odin is started
I have a Note 2 (N7100) on Android 4.1.2
Thanks a lot!
No problems this way.
You can go on with further process.
Try to reinstall correct USB drivers
I just proceeded anyways, meaning connecting the phone in download mode to the PC and then opening odin and it all worked out
thank you for the help!

[Q] Think I've bricked it.

Hi, I installed Cyanogen without a problem however the USB connection did not work as well as some other things so I found the Note 2 stock ROM and went to try flash that.
However the USB connection not working seems to still be a problem as the ROM doesn't flash (failed) and isn't recognized by Kies if I try to do an emergency firmware recovery.
Help guys! I'm stuck at the either "downloading" screen when I turn my phone on to load the ROM or either "there was a firmware error", I cannot load my phone past that, arrrrgh!
looks like it is a driver issue . You can try installing the drivers manually or with a different pc which previously recognized Note 2 ..
Go to downloading mode and let the usb drivers install from online or windows update .. or try connecting a different Note 2 and check if your PC recognizes Note 2

[HELP]Unfinished Firmware Flash Via Odin

hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL

Note 3 lollipop Bricked Help!!

Hello I am new here, and also a noob in rooting, I recently rooted my Note 3 N900T on 5.0 it was all working good but I didnt had a recovery so I decided to install Rom manager and installed a recovery and clicked boot into recovery after that I got a bootloop so I flashed a stock firmware from Odin and then it failed after that My device is showing "Firmware Upgrade encounter connect to Kies", but now when I connect to the PC is says Usb device not recognized, I tried uninstalling both Kies and usb drivers and reinstalling still no good,
Please Help!!
Thank You
The device opens up in Download mode but doesn't get recognized by pc tried 3 different pcs, 4 different cables
Whoever helped and it worked I promise I will paypal 50$ to you
Follow this guide and you should be okay, now that you've fixed your phone you head over to GalaxyNote3Root.com and read everything relevant to rooting before you try again.
+ If you **** up beyond all repair you can even send it to this guy and he'll fix it. As long as you pay the shipping.
you need Odin 3.11 and the recovery image for the phone, I'd personally use TWRP

Categories

Resources